advertisement
Roughing-In
Product Information
Applicable product:
Under-mount lavatory K-2355
Fixture*:
Basin area
Water depth
Drain hole
17-5/8 ″ (448 mm) x 13″ (330 mm)
3-3/4 ″ (95 mm)
Ø 1-3/4 ″ (44 mm)
* Approximate measurements for comparison only.
Included components:
Basin clamp assembly
Cut-out template
Recommended accessory:
Adjustable P-Trap
52047
1051937-7
K-8998
K-2355
ARCHER
TM
UNDER-MOUNT LAVATORY
Installation Notes
Install this product according to the installation guide.
Supplied basin clamp assemblies require 1 ″ (25 mm) minimum countertop thickness. Installer must supply anchors for thinner countertops.
NOTICE: Countertop manufacturer or cutter must use the cut-out template provided with the product, or a current one provided by Kohler (call 1-800-4-KOHLER). Kohler is not responsible for cut-out errors when incorrect cut-out template is used.
Will comply with ADA when installed per section 606
Lavatories of the Act.
Fixture conforms to ASME Standard A112.19.2/CSA B45.1. All dimensions are nominal.
15-5/16"
(389 mm)
9-15/16" (252 mm)
19-7/8" (505 mm)
14"
(356 mm)
13-1/8"
(333 mm)
2-1/2" (64 mm)
6-1/2"
(165 mm)
9"
(229 mm)
1-1/8" (29 mm)
7/16" (11 mm)
7-1/2"
(191 mm)
3" (76 mm) 24" (610 mm)
34"
(864 mm)
27"
(686 mm)
Min
8"
(203 mm)
Min 6"
(152 mm)
Max
9"
(229 mm)
Min
Recommended ADA Installation
3/8" Hot
1-1/4" Outlet
3/8" Cold
Ø 3/8" (10 mm)
Sealant
5/8"
(16 mm)
Sealant
Marble
Installation
Wood
4" (102 mm)
Standard Installation
ARCHER
TM
UNDER-MOUNT LAVATORY
1063457-1D
advertisement
Related manuals
advertisement