Machines for Natural Turf

Machines for Natural Turf
Aeration
Machines for Natural Turf
1
Introduction
contents
Redexim develops and manufactures
Professional endorsements 3
page
machines for the maintenance of the
turf on golfcourses, sportsfields, public
areas and horse race tracks. It started
for the company in 1978 with the
invention of the Verti-Drain deep
tine aeration machine, which was
revolutionary at that time.
Over time Redexim developed into
Aeration
4-21
Verti-Drain aerators
4-16
Vertical aerators
17-18
Linear aerators
19-21
QuakeMeter
21
Topdressing
Brush spreaders
22-27
22-24
a company manufacturing a wide
Selfloading + Drum spreader 25
range of specialized machines for
Disc spreaders
26-27
the maintenance of the turf, such as
overseeders, topdressers, sweepers,
Seeding + Overseeding
28-29
scarifiers, brushes and of course
Spiked seeders
28
aerators. More recently, Redexim has
Disc seeders
29
been producing machines for sports
fields made of artificial turf.
Redexim has a distribution network
over more than 100 countries, and has
its own offices in Australia, China,
Sweeping + Verticutting
30-32
Turf-Tidy
30-31
Verti-Rake
31
Verticutters
32
the UK and the USA, aside from its
headquarters in the Netherlands.
Brushing
Brushes (several)
33-34
Dragmat
34
Spraying
34
Verti-Spray
Renovation
2
The Verti-Drain in the early ninety-eighties
33-34
34
35-36
Vibra Sandmaster
35
Stone Burier
35
Turf-Stripper
36
Redexim machines are being used at the world’s most prestigious venues:
Golf Courses
“I purchased the Verti-Drain about
3 years ago to replace an older model
which had provided good results
and reliability for over 10 years. As I
write this, the Verti-Drain is out on
the course aerating greens and tees as
part of the course preparations for the
2008 British Open Championship.”
Chris Whittle, Course Manager
Royal Birkdale Golf Club - UK
“In addition to hosting this year’s PGA
Championship, Oakland Hills CC
South Course also receives about 30.000
rounds of golf annually. The stress
we experience on our fairways from
this level of traffic has been reduced
because of the use of the Verti-Drain.
Our fairway turf has improved and the
disruption to our members is minimal.”
Steve Cook, CGCS.
Oakland Hills CC - USA
“Some members call me “Punch” and
my crew thinks that “my cure all” is
aerification. Adding oxygen to our soil
is one of the most important practices
we do as Turf Managers.
The Verti-Drain Aerifier is helping
Valhalla Golf Club prepare for the
Ryder Cup.”
Mark Wilson, CGCS.
Valhalla Country Club - USA
Sportsfields
European
Championships
Football
AustriaSwitzerland
2008:
Verti-Drain
Mustang at
work on the
day of the final
match between
Spain and
Germany.*
* From Die Presse.
3
Aeration
ShatterTining
The use of the Verti-Drain as a cultivation
method to aerate soils is also known as
deep shatter tining. The Verti-Drain drives
solid tines into the grass and through the
ground up to 400mm (16”) deep, piercing
any pan which may exist. The tines then
heave the soil, cracking up the compaction
before they are withdrawn.
It breaks the side walls and adds pore space
to the soil profile.
Compaction is relieved and the soil is
opened, allowing water to drain and air to
move freely, creating gas exchange.
This heaving action lifts the soil in a
uniform manner. This lift represents the
amount of air that has been incorporated
into the ground.
The Art of the
Verti-Drain®
Needle Tines
Extra fine needle tines ensure minimal surface damage.
Ø8mm needle tines
4
Ø5mm needle tines
The tine angle lever allows easy adjustment
to the degree of ground shatter intensity,
with quick setting to the vertical position for
conventional coring.
Hollow Coring
The Verti-Drain tines penetrate vertically when the tine
angle lever is positioned at 90˚. Perfectly straight cores are
being pulled on the surface. Hollow coring is ideal for soil
exchange programms or thatch removal.
Cross Tines +
Chisel Tines
Cross tines ensure an extra intensive aeration
treatment, while chisel tines will create more space in
the soil for oxygen.
cross tines
chisel tines
5
Verti-Drain® - self-propelled series
These self-propelled Verti-Drains are independently powered and allow for easy manoeuvring in tight areas.
Model Verti-Drain
1513+Carrier
7007Mechanical
7007Hydro
Operation
Weight
Working width
Working depth max
Engine
Capacity at 55mm
(2 1/8”) forward hole pattern
Walk-in-front
950kg (430kg+520kg) (2090lbs)
1320mm (52”)
150mm (6”)
32hp, air cooled
Walk-in-front+sit-on
520kg (1144lbs)
675mm (27”)
150mm (6”)
13hp
sit-on
745kg (1639lbs)
680mm (27”)
150mm (6”)
18hp
2388m2/h (25790sq.ft/h)
1060m2/h (11448sq.ft/h)
1114m2/h (12031sq.ft/h)
Optional items
Solid tines from Ø5x125mm (3/16x5”) to Ø12x150mm (1/2x6”)
Hollow tines from Ø10x125mm (3/8x5”)
Rear roller / Turf hold down fingers / Core Collector
Carrier only: Verti-Drain 1513 can be connected to tractor.
Carrier +
Verti-Drain® 1513
The 1513 Verti-Drain connected
to a Carrier functions as a selfpropelled aerator. It is a high
production aerator, penetrating up
to a depth of 150mm with both
solid tines and hollow coring tines.
Ground pressure is kept to a
minimum, with most of the weight
of the 1513 Verti-Drain and the
Carrier being absorbed by the
wide tyres (24x13.00-12") and the
smooth front roller of the VertiDrain. The ground pressure per
square centimeter amounts to an
impressive 0.45kg.
Combination
Options
The 1513 Verti-Drain can be
decoupled from the Carrier,
and used on a tractor, while
other implements can be
connected to the Carrier.
Carrier + Speed-Seed 1200
6
Carrier + Verti-Cut 1200
Verti-Drain 1513 + tractor
Aeration
Verti-Drain® 7007 Mechanical
The self-propelled
Verti-Drain 7007
can be used both as
a sit-on aerator and
as a walk-in-front
unit. This highly
manoeuvrable VertiDrain can quickly
and easily treat hard
to reach areas.
The 7007 can be equipped with solid (l) and hollow tines (r)
Verti-Drain® 7007 Hydro
The sit-on 7007Hydro Verti-Drain is
hydrostaticly driven, with all speed
adjustments simply done by means of a
foot pedal. The three wheeled machine is
highly manoeuvrable and has a maximum
speed of 5km/h (6.5mph).
A rear
roller helps
leave the
perfect
surface.
7
Verti-Drain® - conventional series
These Verti-Drains are the choice of championship courses and sportfields around the world. With 250mm (10") or 300mm
(12") working depth the units only require a compact tractor.
Model Verti-Drain
7212
7215
7316
Weight
Working width
Working depth max.
Capacity at 65mm (2 ½”)
forward hole pattern
Capacity at 165mm (6 ½”)
forward hole pattern
Tractor required
470kg (1034lbs)
1.2m (47”)
variable to 250mm (10”) max
550kg (1210lbs)
1.56m (61”)
variable to 250mm (10”) max
670kg (1474lbs)
1.6m (63”)
variable to 300mm (12”) max
1200m2/h (12960sq.ft/h)
1870m2/h (20196sq.ft/h)
1400m2/h (15120sq.ft/h)
3000m2/h (32400sq.ft/h)
17hp, lift cap 568kg (1250lbs)
4680m2/h (50544sq.ft/h)
23hp, lift cap 700kg (1540lbs)
3640m2/h (39312sq.ft/h)
27hp, lift cap 825kg (1815lbs)
Standard items
Solid tines Ø12x250mm (1/2x10”), front & rear rollers with scrapers, PTO with slip clutch, storage stand,
central quick adjustment lever, tool box with tools.
Optional items
Multi tine heads
Solid tines: from Ø5 to Ø18mm
Hollow tines: from Ø10 x 125mm (3/8x5”) to Ø24 x 250mm (1x10”)
Cross Tines/ Core collector/ Turf hold down fingers/ Rotating brush
Verti-Drain® 7212
The popular Verti-Drain 7212 is ideally suited for greens
and other sports turf surfaces where limited access or
tractor horsepower is available.
8
Aeration
Verti-Drain® 7215
The compact 7215 VertiDrain fits tractors of 25hp.
It contains a multiple
amount of arms and
tineholders (8) ensuring
increased stability.
Verti-Drain® 7316
The Verti-Drain 7316 is an
efficient machine for use on
sportfields and all areas of the
golf course. With a penetration
depth of up to 300mm(12”)
it will aerate up to 4,200m2/h
(45,360 sq ft/hr) on fairways.
Ø 5mm (1/6”) mini needle tines
on multi tine adapters.
Needle Tines in the Summertime
In the hot summer months, when many golf courses see the highest number of rounds, aerators equipped with needle tines can open
thousands of holes in a soil profile to help reduce or relieve long-term compaction problems. Needle tines, also known a pencil tines,
can be one of the least-disruptive cultural practices used on greens. The treatments help provide passageways so water can move to
the root zone, which lowers drainage and irrigation time and costs. Another benefit is that increased root growth means that turf
plants can draw on water and nutrients located deeper within the soil and have a higher chance of survival in extreme conditions.
9
Verti-Drain® - high speed series
These high speed Verti-Drains are fast aerators, running at speeds of up to 4.3km/h (2.75mph). The new model 1513 can be
connected to the Redexim Carrier for a self-propelled option (see page 6).
Model Verti-Drain 7110
1513
7113 Mustang
7117 Mustang
7120
Working width
Weight
Working depth max
Capacity at 55mm (2 ½”)
forward hole pattern
Capacity at 125mm (5”)
forward hole pattern
Tractor required
1.0m (39”)
340kg (748lbs)
150mm (6”)
1.3m (51”)
430kg (946lbs)
150mm (6”)
1.34m (53”)
520kg (1144lbs)
150mm (6”)
1.7m (67”)
575kg (1265lbs)
150mm (6”)
2.0m (79”)
915kg (2013lbs)
200mm (8”)
2040m2/h (22032sq.ft/h)
3320m2/h (35856sq.ft/h)
2650m2/h (28620sq.ft/h)
3400m2/h (36720sq.ft/h)
3215m2/h (34722sq.ft/h)
4380m2/h (47304sq.ft/h)
7120m2/h (76896sq.ft/h)
5690m2/h (61452sq.ft/h)
13hp, lift cap 410kg (902lbs)
20hp, lift cap 500kg (1100lbs)
23hp, lift cap 650kg (1430lbs)
7300m2/h (78840sq.ft/h)
25hp, lift cap 700kg (1540lbs)
7500m2/h (81000sq.ft/h)
45hp, lift cap 1000kg (2200lbs)
Standard items
Solid tines 1 set, front + rear rollers with scrapers (7110 + 1513 rear roller optional)
PTO with slip clutch, storage stand, central quick adjustment lever, toolbox with tools.
Optional items
Solid tines from Ø5x125mm (3/16”x5”) to Ø12x150mm (1/2”x6”)
Hollow tines from Ø10x125mm (3/8”x5”) to Ø18x150mm (3/4”x6”)
Turf hold down fingers / Windrow kit / Rear roller (Rear roller standard for 7113, 7117 + 7120)
Verti-Drain® 7110
The model
7110 is an
economically
priced
Verti-Drain
fitting low
hp compact
tractors.
Verti-Drain®
1513
Mundsley GC gains
with new Verti-Drain
The new
1513
can be
connected
to a tractor
as well
as to the
Redexim
Carrier (see
page 6).
Founded in 1901, the golf
course was designed with
the help of the legendary
6 times Open Champion
Harry Vardon..
The club has just taken
delivery of a new VertiDrain (1513) – a very
fast lightweight aerator.
Head Greenkeeper Tim
Gee’s team particularly
liked the speed of the
machine; being able to
get over the ground in a
much shorter time frame.
10
They were also surprised
by the good selection
of tines available, and
that changing a tine
was only a five minute
job. Depending on the
weather they like to
aerate once a month on
the greens and tees.
“Now that we have the
new Verti-Drain (1513)
the minor water-logging
we have in the lower area
of course will no longer
be a problem”, said Tim.
From TP June/July 2011
Aeration
Verti-Drain® 7113 Mustang
The Verti-Drain
7113 contains a
3-speed gearbox
and has a working
width of 1.3m
Verti-Drain® 7117 Mustang
The Verti-Drain 7117 has the same features as the
7113 model, but with a working width of 1.7m
Verti-Drain®
7120
Topdressing prior to
Shatter Tining
The Verti-Drain 7120
aerates compacted soils at
depths up to 200mm. With
its working width of 2.0m,
it is aimed at professionals
managing large open spaces.
After the turf is topdressed with sand, the VertiDrain works the sand into the soil with solid tines.
Set at an ideal shatter angle of 5-10 degrees and a
close hole spacing, the tines then shatter the sand
backwards through the soil profile thus thoroughly
mixing it into the soil structure.
11
Verti-Drain® Concorde - high speed + heavy series
The new Verti-Drain Concorde is able to work at a high speed in hard soils, and can take solid tines with a diameter of up to
24mm(1”).
Models Verti-Drain Concorde
2216
2220
Working width
Weight
Working depth max.
Capacity at 65mm (2 ½”) forward hole pattern
Capacity at 130mm (5 ½”) forward hole pattern
Tractor required
1.6m (63”)
840kg (1848lbs)
up to 225mm (9”)
2796m2/h (30196sq.ft/h)
5592m2/h (60394sq.ft/h)
45hp, lift cap 1050kg (2310lbs)
2.08m (82”)
1030kg (2266lbs)
up to 225mm (9”)
3728m2/h (40262sq.ft/h)
7456m2/h (80525sq.ft/h)
50hp, lift cap 1300kg (2860lbs)
Standard items
Optional items
Solid tines Ø18x225mm. Adapters for tines with Ø24mm to Ø18mm. Front rollers with scrapers,
PTO with slipclutch. Storage stand, hydraulic quick depth adjustment system, toolbox with tools.
Solid tines from Ø5x125mm (3/16” x5”) to Ø24x225mm (1”x9”)
Hollow tines from Ø10x125mm (3/8”x5”) to Ø
Ø32x225mm (1 1/4”x 9”)
Turf holddown fingers/ Windrow kit/ Rear roller/ Adapters for different tine diameters.
Verti-Drain® 2216 Concorde
This tough model is designed for undulating areas
Depth adjustment of the tines is done hydraulically from the
tractor seat, with a clear visibility from the seat of the set depth.
Verti-Drain®
2220 Concorde
For large, compacted
areas this Concorde
with a working width of
2.08m is ideal.
12
Aeration
Verti-Drain® - heavy series
The heavy series of Verti-Drains are designed to aerate soils up to a full 400mm (16”) deep, with four different models
available and a three-speed gearbox that will match any tractor.
Models
7416
7516
7521
7526
Working width
Weight
Working depth max.
Capacity at 65mm (2 ½”)
forward hole pattern
Capacity at 195mm (7 2/3”)
forward hole pattern
Tractor required
1.6m (63”)
870kg (1914lbs)
up to 350mm (14”)
1.6m (63”)
1128kg (2482lbs)
up to 400mm (16”)
2.1m (83”)
1375kg (3025lbs)
up to 400mm (16”)
2.6m (102”)
1595kg (3509lbs)
up to 400mm (16”)
1360m2/h (14688sq.ft/h)
1120m2/h (12096sq.ft/h)
1470m2/h (15876sq.ft/h)
1820m2/h (19656sq.ft/h)
4200m2/h (45360sq.ft/h)
35hp, lift cap 1050kg (2310lbs)
3360m2/h (36288sq.ft/h)
4410m2/h (47628sq.ft/h)
5460m2/h (58968sq.ft/h)
45hp, lift cap 1350kg (2970lbs) 55hp, lift cap 1650kg (3630lbs) 65hp, lift cap 1900kg (4180lbs)
Standard items
Solid tines Ø18x300mm (2/4”x12”) for 7416, 7516 and 7521 / Solid tines Ø24x400mm (1”x16”) for 7526
Front & Rear roller / Toolbox with tools / PTO with slip clutch / Storage stand integrated in machine
Optional items
Solid tines from Ø5x125mm (3/16”x5”) to Ø24x225mm (1”x9”)
Hollow tines from Ø10x125mm (3/8”x5”) to Ø
Ø32x225mm (1 1/4”x 9”)
Turf holddown fingers/ Windrow kit/ Rear roller/ Adapters for different tine diameters.
Verti-Drain® 7416
The VertiDrain 7416 is
light enough
for application
on golf greens,
while robust
enough for
hard soils. It
penetrates
the soil up to
350mm (14”).
Verti-Drain® 7516
Verti-Drain model 7516 is a heavier model, penetrating up to 400mm (16”) deep and is designed
for hard areas.
Less tractor
horsepower is
needed when
the bogy
wheel system
is added.
13
Verti-Drain® 7521
This unit with a 2.1m working width is widely
used by contractors and by golf clubs on
fairways.
Verti-Drain® 7526
The Verti-Drain 7526 comes
into its own in large open
spaces including fairways,
race tracks and large
sportsfields.
14
Aeration
Verti-Drain® - extra heavy series
The heavy 76-series weighs considerably more than the 75-series, containing a heavier gearbox, PTO and rear roller support
that are the best choice when soils are really hard.
Models Verti-Drain
7621
7626
Working width
Weight
Working depth max.
Capacity at 65mm (2 ½”) forward hole pattern
Capacity at 195mm (8”) forward hole pattern
Tractor required
2.1m (83”)
1565kg (3443lbs)
400mm (16”)
1620m2/h (17496sq.ft/h)
4850m2/h (52380sq.ft/h)
55hp, lift cap 2000kg (4400lbs)
2.6m (102”)
1930kg (4246lbs)
400mm (16”)
2000m2/h (21600sq.ft/h)
6010m2/h (64908sq.ft/h)
65hp, lift cap 2300kg (5060lbs)
Standard items
Solid tines Ø24x400mm (1”x16”) / Front & Rear roller / 3-speed shuttle gearbox /
Toolbox with tools / PTO with slip clutch / Storage stand integrated in machine
Optional items
Multi tine heads: 8 (7621) or 10 (7626) units / Solid tines: from Ø8 to Ø24mm (1/4”-1”)
Hollow tines: from Ø10x125mm to Ø32x300mm / Bogy wheel kit
Verti-Drain® 7621
The 7621 has a 2.1m working width, requiring
a tractor of at least 55hp with a lift capacity of
2000kg.
For the 76
Verti-Drain
Series the
tine depth
adjustments
are made
comfortably
from the
tractor
seat via the
hydraulic
controls.
Verti-Drain® 7626
The 7626 is the largest and heaviest model yet in the
Verti-Drain family.
For easy transport a bogy wheel kit can be added.
15
Verti-Drain® accessories
Wheel kit – H-Models
A retro–fit bogy wheel system is available for
easy transport. This also means that a tractor
with less lift capacity is required.
Turf hold down fingers
Core collector
The Core Collector uses a special two stage collecting system. A flexible
rubber flap gathers most of the cores. Behind there is a row of ground
following aluminium fingers to ensure that all material is collected
without the risk of damage to the turf.
The turf hold down fingers ensure that, when vertidraining or coring, there is no danger of damage to
the turf even with a shallow root system.
Rotating brush
A rotating brush on the rear of the Verti-Drain
incorporates sand into the holes, levels the ground
or breaks up the cores. The brushes are segmented,
so that it is ideally suited to process the material.
Windrow kit
The Windrow kit aligns the cores for easy collection.
16
Aeration
Verti-Core + Easy-Core: vertical aerators - towed
The tines of these aerators penetrate the soil perfectly vertical, with the penetration depth limited they are able to run at high speeds.
Model
Verti-Core 1600
Easy-Core 116
Working width
Working depth
Weight
Tractor recommended
Max. capacity
1.6m (63”)
125mm (5”)
820kg (1804lbs)
45hp with 1000kg lifting capacity
5760m2 (62,208sq.ft) (at hole spacing 11x11cm)
1.1m (43”)
70mm (3”)
326kg (717lbs)
None: own engine 12hp
7800m2 (84,240sq.ft) (at hole spacing 6½x17cm)
hollow+solid tines / core collector / windrow kit /
anti-vibration System
hollow+solid tines
Optional items
Anti-vibration system
Verti-Core 1600
The Verti-Core 1600 is a highly productive and low maintenance
turf aerator. Robust construction combined with simple
adjustments make the Verti-Core reliable and easy to use.
Special core
deflectors
keep the cores
away from
the machine
An optional
anti-vibration
system,
containing a
strong spring,
can be added
for stony
conditions.
A sturdy crank drives the tine arms
Support arms enable the Verti-Core to work in
extremely tough conditions.
Easy-Core 116
The Easy-Core 116 is an economical aerator run by its own
12hp engine, so that it can be operated behind virtually any
towing vehicle including ride on mowers.
Operator friendly controls
17
Easy-Core: vertical aerators - self-propelled
These easily manoeuvrable walkbehind aerators produce perfectly vertical aeration holes.
Model Easy Core
104
106
108
208
Working width
Working depth
Weight
Engine
Engine drive
Standard Hollow Tines
Tine amount per set
Capacity (max)
360mm (14”)
70mm (3”)
94kg (207lbs)
51/2hp B.&Stratton*
non-driven
Ø22x16x70mm
4
2043m2/h (22064sq.ft/h)
540mm (21”)
70mm (3”)
113kg (249lbs)
5hp Honda
non-driven
Ø22x16x70mm
6
2550m2/h (27540sq.ft/h)
520mm (20”)
70mm (3”)
136kg (299lbs)
5hp Honda
non-driven
Ø22x16x70mm
8
2550m2/h (27450sq.ft/h)
520mm (20”)
70mm (3”)
146kg (321lbs)
51/2hp Honda
driven
Ø22x16x70mm
8
2780m2/h (30024sq.ft/h)
Optional items
Hollow Tines: Ø16x9 1/2x70mm or Ø22x16x70mm or Ø45x38x70mm
Solid Tines: Ø9 1/2x70mm or Ø22x70mm
Chariot-ride behind kit (for model 208 only) / Special air-filled tyres
* 5hp Honda engine is optional for model 104
There are 4 models of
the walk-behind EasyCore. A simple but
effective aerator.
When soil compaction
is relieved, this leads
to better root growth
and improved drainage.
This aids thatch
control, and stimulates
the density of the turf.
Models 104, 106 and 108 are all non-driven, and contain respectively 4, 6, and 8 tine arms, while model 208 is driven and contains 8 tine arms.
Hole spacing:
Easy Core 104 + 106
A = 15cm, B = 9cm
Easy Core 108 + 208
A = 17cm, B 6½cm
Options:
An optional
chariot transfers
the Easy Core 208
to a comfortable
ride-behind
aerator.
Wide air-filled
tyres are optional.
18
Aeration
Verti-Quake: linear aerators - driven
The Verti-Quake decompacts the soil via rotating off-set blades, shattering it laterally.
Model Verti-Quake
2510
2516
2521
3822
Working width
Working depth max.
Weight
Tractor required
3-point connection
Capacity (max)
Number of blades
Blade thickness
1.1m (43”)
250mm (10”)
470kg (1034lbs)
25hp, lift cap. 650kg (1430lbs)
cat 1 and 2
1510m2/h (16308sq.ft/h))
12
12mm (0,5”)
1.6m (63”)
250mm (10”)
575kg 1265lbs)
30hp, lift cap. 750kg (1650lbs)
cat 1 and 2
2400m2/h (25920sq.ft/h))
18
12mm (0,5”)
2.1m (83”)
250mm (10”)
690kg (1518lbs)
35hp, lift cap. 850kg (1870lbs)
cat 1 and 2
3150m2/h (34020sq.ft/h))
24
12mm (0,5”)
2.2m (87”)
380mm (15”)
1250kg (2750lbs)
70hp, lift cap. 1500kg (3300lbs)
cat 2
3300m2/h (00000sq.ft/h)
24
15mm (0.6”)
Optional items Coulter knives for keeping the slits open.
Model 2521
The Verti-Quake vastly
improves drainage, root
development, plus the uptake
of moisture and nutrients.
4 Verti-Quake models are
available, with a working depth
up to 550mm.
Model 2510
How does it work?
Decompaction of the
soil takes place via offset blades. Their rotary
motion, combined with
the forward speed, sets up a
wave action. Thus the soil
is shattered laterally, and
decompacted consistently
from the surface to full
working depth without
surface damage.
19
Multi-/Level-Spike + Verti-Knife: linear aerators - non driven
Keeping the surfaces of sports turf open and able to breathe is the prime function of the Verti-Knife, Level-Spike and
Multi-Spike systems.
Model
Multi-Spike 1200
Level-Spike 1700
Level-Spike 2200
Verti-Knife 1600
Working width
Road width
Weight
Tractor required
1.35m (53”)
1.45m (57”)
400kg (880lbs)
Min. 18hp
1.8m (71”)
1.86m (73”)
405kg (891lbs)
Min. 35hp
2.4m (94”)
2.47m (97”)
495kg (1089lbs)
Min. 45hp
1.6m (63”)
2.0m (79”)
400kg (880lbs)
Min. 25hp
surface intense deep
aeration surface aeration
aeration
Working depth
Number of mounting discs
up to 250mm (10”)
9
up to 250mm (10”)
12
up to 250mm (10”)
16
40mm(1.6”) 40mm(1.6”) 25-150mm (1”-6”)
15
30
6
Standard supplied with
Knives/coring tines number
- Truckster knives
- Deep Slit knives
- Fine Slit knives
- Twisted Deep Slit knives
- Hollow Coring tine
36 truckster knives + rear roller
Standard/Maximum
36/154
36/154
192/192
36/154
54/108
48 deep slit knives
Standard/Maximum
48/ 72
48/ 72
264/264
48/ 72
72/104
64 deep slit knives
Standard/Maximum
64/196
64/196
360/360
64/196
96/192
discs + axles for intense
aeration + rear roller
Optional items
wheelkit +
weight transfer system
wheelframe + rear roller + weight transfer system
Deep aeration axle set
Multi-Spike 1200, Level-Spike 1700 + 2200
The MultiSpike and
Level-Spike
slit the
soil with
different
size knife
options.
By locking
the rear
roller the
maximum
depth is
being set.
The Multi-Spike 1200 can be utilised with
a wheel bogy for transport (photo above
left). In this configuration the Multi-Spike
can be used in conjunction with virtually
any prime mover which has basic flow and
return hydraulics.
Four knife sizes + spoon tines
Max. working depth
Deep Slit Knife
Truckster Knife
Fine Slit Knife
Twisted Deep Slit Knife
Hollow Tine
Thickness
250mm
200mm
100mm
250mm
125mm
5mm
3mm
3mm
5mm
26mm Ø
Twisted Deep Slit knives are designed in a twisted form
so that a more aggressive slicing job can be done.
The optional weight
transfer system ensures
that the weight of the
tractor is transferred on
to the knives in hard soil
conditions..
20
Hollow
tine
option
Aeration
Verti-Knife
The Verti-Knife runs round
discs of different diameters
and configurations through
the soil, up to a depth of
150mm. The movement of
air, water and nutrients is
encouraged throughout the
critical root zone area. This
results in vastly improved root
density and rooting depth.
3 FUNCTIONS
The Verti-Knife has 3 basic functions and positions.
By interchanging the different axes with discs:
Position 1
Surface Aeration
Working depth
Disc diameter
Disc thickness
Number of discs
Disc Spacing
10-40mm
200mm
3mm
15
The 15 minidiscs (working
depth up to 40mm) are ideally
used when roots are shallow,
and when minimal surface
disturbance is required.
100mm
Position 2
Intense Surface Aeration
Working depth
Disc diameter
Disc thickness
Number of discs
Disc Spacing
40mm
200mm
3mm
30
A cassette of 30 minidiscs can
be adjusted to a working depth
up to 40mm,
for very intense aerification.
Disc spacing is only 50mm.
50mm
Position 3
Deep Aeration
Working depth
Disc diameter
Disc thickness
Number of discs
Disc Spacing
25-150mm
450mm
4mm
Six discs with a large diameter
of 450mm, at 300mm spacings,
penetrate the soil up to 150mm.
Disc spacing is 300mm.
6
300mm
The double axle with discs for
intense surface aeration.
QuakeMeter
The Quake Meter is a penetrometer, the perfect scientific
instrument for measuring compaction levels in the soil at
all depths down to 600mm (24”). High quality stainless
steel and aluminium alloy for durability and accuracy.
Hydraulic action gives steady and consistent read out in
all conditions.
21
Topdressers: Rink brush spreaders
Topdressing
The Rink brush topdressers most accurately “shoots” the material with force between the grass blades.
Model Rink
SP950
walk-in-front
Self-propelled
Spreading width
Spreading thickness
Weight
Hopper capacity
level
Tractor size
Optional items
TB950
pulled
1005
1205
1010
3-point
hitch version
utility vehicle
version
1210
1520
0.95m (37”)
0.95m (37”)
1.50m (59”)
1.80m (71”)
1.50m (59”)
1.80m (71”)
1.40m (55”)
2.0m (79”)
0.3 to 10mm
0.3 to 10mm
0.3 to 10mm
0.3 to 10mm
0.3 to 10mm
0.3 to 10mm
0.3 to 40mm
0.3 to 40mm
280kg (616lbs) 190kg (418lbs) 200kg (440lbs) 300kg (660lbs) 270kg (594lbs) 370kg (814lbs) 950kg (2090lbs) 1950kg (4290lbs)
0.33m3
self-propelled
6.5hp engine
0.33m3
0.75m3
Any pull vehicle 25hp +:
1.0m3
0.75m3
1.0m3
2.0m3
4.5m3
for utility vehicle 20hp +:
20hp+:
25hp+:
65hp +:
double acting hydraulic valve and min. oil supply of:
12l/[email protected] 20l/[email protected] 25l/[email protected] 140bar 40l/[email protected] 175bar
Auxiliary tank and pump unit (Rink 1010,1210, 1520) / Own 13hp engine (Rink 1010, 1520) / 4 pivoting wheels (Rink 1520)
Rink
SP950
walk-in front
The Rink SP950
contains a 6,5hp
engine, and
the weight of
the machine
is evenly
distributed over
6 wheels in order
to minimize
ground pressure.
The Rink TB950
is a wheel driven
topdresser and
can be pulled
by virtually
any vehicle.
The brush and
conveyor belt
are driven by
the 4 wheels (or
optional by 2
wheels), ensuring
a consistant
application rate.
22
3045
A Quad or ATV
easily operates the
Rink TB950 pulled.
Rink TB950 pulled
Rink
1003/
1005
These lightweight
Rinks can easily
be connected to
different vehicles.
The Rink 1005 has a capacity of 0.75m3.
The Kubota RTV with the custom made Rink 1003 with 0.4m3 hopper capacity.
Rink 1205
on utility
vehicle
The Rink 1205
contains a hopper
made of aluminium
and is placed on
utility vehicles. It
covers the tyremarks
of the vehicle due
to its large working
width of 1.8m.
Rink 1010
The
floatation
tyres
minimize
ground
pressure
and the
lightweight
hopper is
made of
aluminium
to avoid
rusting.
23
Topdressing
Rink 1210
The Rink 1210
has low sides,
for easy refilling
and ensures the
operator has a
good rear view.
The Dry-sand plate ensures
extra accurate spreading.
Rink 1520
The Rink 1520 can
spread extremely
accurate.
Optional: the Rink 1520
can be equipped with
4 small pivoting tyres .
Rink 3045
The Rink 3045
has a capacity
of 4,5m3.
24
Topdressers: Easy-Spread selfloading spreaders + Rink drum spreader
The Easy-Spread can be loaded in a one man operation. The Rink 2020 is ideal for spreading coarse material.
Model Easy-Spread 1300
Operation
Working width
Spreading thickness
Weight (empty)
Hopper capacity
Tractor required
1600
3-point hitch
3-point hitch
1.43m(56”)
1.73m (68”)
0-10mm (0-0.4”)
0-10mm (0-0.4”)
265kg (583lbs)
325kg (715lbs)
0.5m3 (17.6qu.ft)
0.75m3 (26.5qu.ft)
28hp+1000kg (2200lbs): 38hp+1400kg (3080lbs):
lift capacity + double acting hydraulic outlet.
1500TR
2000TR
Rink 2020
drum spreader
pulled, on tyres
pulled, on tyres
1.5m (59”)
2.0m (79”)
0-10mm (0-0.4”)
0-10mm (0-0.4”)
635kg (1397lbs)
900kg (1980lbs)
1.35m3 (47.7qu.ft)
1.85m3 (65.3qu.ft)
45hp+
50hp+
double acting hydraulic outlet
pulled, PTO driven
1.4m (55”)
3.25mm
950kg (2090lbs)
2.0m3 (71qu.ft)
25hp
Easy-Spread 1300 + 1600
The Easy-Spread models 1300+1600 are mounted
to the 3-point linkage of the tractor and are very
manoeuvrable.
Easy-Spread 1500TR + 2000TR
The Easy-Spread 2000TR
carries the load over 7 tyres.
The Easy-Spread TR series
is a 1 man and tractor
operation. The large
hopper is hydraulically
raised or lowered by
powerful hydraulic
cylinders for loading and
spreading. A wheel transfer
frame then takes the
weight when transporting
the heavy load.
Rink 2020
The PTO driven
Rink 2020 contains
a drum at the
rear and is ideal
to spread coarse
material.
25
Topdressers: Rink disc spreaders
The Rink twin-disc topdressers spread material up to 15m (49ft) wide and succesfully operate with wet or dry sand.
Model Rink
DS800
Spreading width
Spreading thickness
Weight
Hopper capacity level
Tractor size
2 to 12m (6½-40ft) variable
2 to 15m (6½-49ft) variable
0.5 to 15mm (0.02-0.60”)
0.5 to 15mm (0.02-0.60”)
460kg (1012lbs)
490kg (1078lbs)
820kg (1804lbs)
1800kg (3960lbs)
0.8cu.m (28cu.ft)
1.2cu.m (42cu.ft)
2.0cu.m (70cu.ft)
3.8cu.m (125cu.ft)
25hp+:
25hp+:
35hp+:
60hp+ single acting
Double acting hydraulic valve and min.
valve or brake valve
oil supply of 25lt/min by 140 bar (2031psi)
Optional items
towed
DS1200
towed
Conveyor belt
DS2000
towed
DS3800
towed
Conveyor belt
DS800
on utility vehicle
2 to 12m (6½-40ft) variable
0.5 to 15mm (0.02-0.60”)
440kg (968lbs) incl subframe
0.8cu.m (28cu.ft)
utility vehicle
with OEM oil pump
with min.oil supply
of 25lt/min at 140 bar
(2031psi)
Conveyor belt
DS800 + DS1200 towed
The Rink DS800 + DS1200 disc spreaders
have a hopper capacity of 0.8m3 and 1.2m3
(level). The operation of the belt and spinners
is done from the tractor seat.
Optional:
an electrical
control panel,
carried to the
operator seat,
controls the belt
and spinner
speed
The Cross Conveyor weighs
150kg and has a length of 3m;
the width of the belt is 30cm.
26
Topdressing
DS2000
The 2.0m3 capacity
DS2000 evenly spreads
wet topdressing material.
DS3800
The large DS3800 contains 2 large balloon tyres
to minimize ground pressure.
DS800 on
utility vehicle
The DS800 can be mounted on utility
vehicles (John Deere Progator + Toro
Workman) and the operation of the belt
and spinners is done from the seat, by
using the hydraulic levers.
27
Seeding + Overseeding
Speed-Seed: spiked seeders
The Speed-Seed uses spiked rollers, spreading seed in thousands of tiny holes.
Model Speed-Seed WB
self-propelled
Working width
Weight
Number of holes
Hopper capacity
Seed-density
Tractor required
Ground speed
Optional items
1200
towed
1600
towed
2100
towed
2400
towed
0.61m (24”)
1.2m (47.2”)
1.6m (63”)
2.1m (83”)
2.4m (94”)
225kg (495lbs)
370kg (814lbs)
450kg (990lbs)
625kg (1375lbs)
750kg (1650lbs)
940 per m2 (1124 per sq.yd) or 1840 per m2 (2201 per sq.yd) with optional 2nd spiked roller
10kg (22lbs)
168ltr (6cu.ft)
225ltr (8cu.ft)
300ltr (10.7cu.ft)
336ltr (12cu.ft)
fully adjustable for any type of seed
own engine, 5hp, Honda 20hp+450kg (990lbs) lift. 30hp+550kg (1210lbs) lift. 35hp+800kg (1760lbs) lift. 40hp+850kg (1870lbs) lift.
up to 10km/h (6mph)
2nd spiked roller (all models except Speed-SeedWB) / Dirt scraper for spiked roller (all models)
Speed-Seed WB
The self-propelled Speed-Seed WB carries
out all overseeding needs on fine turf
areas, and is fitted with a Honda engine
and hydrostatic transmission, which
produces an infinite range of forward
and reverse speeds up to 7km/h for all
conditions.
A rear brush sweeps the seed into the mass
of holes – leaving a groomed finish.
Speed-Seed towed
The towed Speed-Seed models are ideal to (over-) seed large areas
quickly. When both the front- and rear roller are equipped with the
individual cast rings, a total of 1840 holes per m2 can be achieved.
Sept 11, 2007 –
The Olympic
Grass, for the
Beijing Olympics
in august 2008,
first being
planted with
the Speed-Seed,
producing 1840
holes/m2 for the
seed to drop in.
Options:
An optional scraper is available for the Speed-Seed to keep the spikes
clean from soil. Extra weights can be added for hard grounds.
28
Verti-Seed + Overseeder : disc seeders
The disc seeders bury the seed accurately in grooves into the soil.
Model
Working width
Weight
Disc spacing
Cutting depth
Hopper Capacity
Seed density
Tractor required
Ground Speed
Capacity
Verti-Seed
Verti-Seed
004.1204
1275
Overseeder
Overseeder
Overseeder
PTO driven
PTO driven
pulled
pulled
pulled (light version) pulled
004.804
1575
1575LV
Overseeder
2075
0.84m (33”)
1.24m (49”)
450kg (990lbs)
590kg (1298lbs)
40mm (1 9/16”)
40mm (1 9/16”)
0-30mm (0-1 1/4”)
0-30mm (0-1 1/4”)
95ltr (21 gallon)
145ltr (32 gallon)
fully adjustable for any type of seed up to 2grm/m2
(1/4lbs/1000sq.ft)
17hp, 600kg
22hp, 750kg
(1320lbs) lift cap.
(1650lbs) lift cap.
1.2m (47”)
1.58m (62”)
1.58m (62”)
2.08m (82”)
685kg (1507lbs)
1160kg (2552lbs)
825kg (1815lbs)
1480kg (3256lbs)
75mm (3”)
75mm (3”)
75mm (3”)
75mm (3”)
0-20mm (0-0.8”)
0-20mm (0-0.8”)
0-20mm (0-0.8”)
0-20mm (0-0.8”)
168ltr (37 gallon)
225ltr (49 gallon))
225ltr (49
( gallon))
300ltr (66
( gallon)
0.2-2.8kg (0.4-6lbs) per 100m
100 2/120yd2 in 10 steps for fine seed and
0.2-4kg (0.4-9lbs) per 100m2/120yd2 in 10 steps for course seed
35hp, 900kg
40hp, 1300kg
35hp, 950kg
50hp, 1600kg
(1980lbs) lift cap.
(2860lbs) lift cap.
(2090lbs) lift cap.
(3520lbs) lift cap.
up to 10km/h (6mph)
up to 6000m2/h
(7176sq.yd/h)
up to 10km/h (6mph)
up to 14400m2/h
(17222sq.yd/h)
up to 10km/h (6mph)
up to 10000m2/h
(11960sq.yd/h)
up to 12km/h (7.5mph) up to 12km/h (7.5mph) up to 12km/h (7.5mph)
up to 18900m2/h
up to 18900m2/h
up to 24909m2/h
(22604sq yd/h)
(22604sq yd/h)
(29791sq yd/h)
Optional items Verti-Seed: Fine dosing kit for seeding up to 2grm/m2 (0.4lbs/1000sq.ft)
Verti-Seed
The Verti-Seed is
designed for the
professional user who
wants precision control
of dosage and depth,
ensuring maximum
germination for all seed
types. The Verti-Seed’s
unique action provides
direct seed contact with
the soil which ensures
good germination rates.
Direction of travel
The Verti-Seed’s unique action first opens the turf
using special oval shaped discs followed by small
chisels. The seed is then fed through the seeding
funnel and released just above the slit where the
wind cannot blow it away. The seed is deposited
in the furrow accurately and can be precisely
adjusted to give you exact rates even for very fine
seed, like bents and fescues. The furrow is then
sealed by the seeding shoe. Each seeding element
is independently sprung enabling the Verti-Seed
to accurately seed on any ground contour.
The Overseeder
The Overseeder buries the seed up to 20mm(3/4”)
deep in the ground, safe from the beaks of hungry
birds and out to the way of the wind. The amount of
seed is controlled to a highly accurate degree and
the Overseeder takes undulating ground firmly in
its stride. This is thanks to individually mounted
coulters that allow the seeder to work in undulating
conditions.
The seed drops
between the blades
into the groove.
Overseeder
1275 equipped
with the
optional bogy
wheel kit.
29
Turf-Tidy: sweeper, verticutter + mower Sweeping + Verticutting
The Turf-Tidy is a versatile sweeping machine, incorporating de-thatching, verticutting and flail cutting.
Model Turf-Tidy
1310
1710
3000
Working width
Hopper capacity
Weight
Recommend min. tractor size
-as sweeper
-as scarifier
-as flail mower
Tractor hitch
Tractor hydraulic requirements
1.3m (51”)
1.8m3 (64”)
890kg (1958lbs)
1.7m (67”)
2.3m3 (81cu.ft)
990kg (2178lbs)
1.8m (71”)
3.0m3 (106cu.ft)
1275kg (2805lbs)
20hp
28hp
35hp
Trailed ring and pin
single acting outlet
25hp
32hp
40hp
Trailed ring and pin
single acting outlet
PTO Speed
Tipping height
up to 540rpm
1680mm (66”)
up to 540rpm
1680mm (66”)
25hp
35hp
45hp
Trailed ring and pin
double acting outlet
+single acting valves.
up to 540rpm
2170mm (85”)
Standard items
Optional items
Set of scarifier blades, PTO shaft, front roller, draw bar.
Brush kit, front wheels, 2 extra rear wheels (to make total of 4) brush system (model 3000 only)
Turf-Tidy 1310 + 1710
The Turf-Tidy’s fully floating head follows the
grounds’ contours ensuring accurate cutting
and pick up. The unique turbo fan makes a
clean sweep of leaves, pine needles, paper
and grass clippings.
The diagonal highlift of the hopper
enables it to be emptied into trailers.
The Turf-Tidy is standard supplied with scarifier blades, but can also be
equipped with different flail blades.
Blade options:
Scarifier
blade
30
Plain
flail knife
Back to back
flail knife
Turf-Tidy 3000
The new Turf-Tidy 3000
sweeps, scarifies and mows
very accurately, due to the
extremely fast speed of the
rotor (2600rpm when mowing
or/and scarifying; 750rpm for
sweeping).
The front and back roller are
easy to adjust, and access to the
main rotor is comfortable, so
blades can be changed quickly.
Separate rotors
containing
scarifier blades
(left) or brushes
(right) can be
installed.
Scarifier blade
Wind paddle
The long bristles of
the brushes create a
fan effect and give
more flexibility over
undulations
Above:
The Turf-Tidy
3000 (here busy
scarifying) can be
optional equipped
with 4 rear tyres.
The tipping
heigt of the
hopper is 2.17m
Special wind paddles ensure a better
pickup of the debris when scarifying
Verti-Rake: verticutters + dethatchers
The Verti-Rake decompacts the turf surface using thin spring-loaded and flexible tines.
Model Verti-Rake Pro 200
Pro 300
Pro 450H
Pro 600H
Weight
Tractor required
Number of rakes / Foldable
230kg (506lbs)
20hp
200 / no
380kg (836lbs)
25hp
360 / hydraulically
550kg (1210lbs)
40hp
480 / hydraulically
175kg (385lbs)
10hp
168 / no
Optional items (Pro 200 only): Brushkit / Towed version (mechanically) including drawbar
Verti-Rake
The Verti-Rake tines scratch between the turfblades and loosen the
thatch. The tines are integrated in a special protection device that will
prevent the loss of tines during operation.
Oxygen and nutrients can be more easily introduced into the surface
area resulting in a healthier playing field.
The Verti-Rake can also be used to create a seed bed before overseeding.
Verti-Rake Pro 450H unfolded (l) and folded (r)
Model Pro 200 with brushes
31
Verti-Cut 1200 + Pedestrian Scarifier: verticutters
Verticutting
The robust verticutting machines remove thatch up to a depth of 40mm(1.6”).
Model
S510 Pedestrian
Model Verti-Cut
1200 pto
1200 trailed
Weight
Working width
Working depth
Spacing
48kg (106lbs)
460mm (18”)
30mm (1,2”)
- with 15 blades 30 mm
- with 29 blades 15 mm
Weight
Working width
Working depth
Tractor required
130kg (286lbs)
1200mm (47”)
40mm (1.57”)
18hp at 540rpm PTO
187kg (411lbs)
1200mm (47”)
40mm (1.57”)
Wheels rear
4.10/3.50-4 Pneumatic with
inner tube, heavy duty steel
rims and greasable 1” bearings
8 x 1.75 semi-pneumatic
Taper lock bearings
on blade shaft
3/8” heavy duty positive
drive edge
Honda, 5.0 hp, 4 cycle
Standard items
Storage stand / PTO
Set of knives 2mm carbite tip
Storage stand / 18hp engine /
Bogy kit with elect cylinder +
remote control / Set of knives
2mm carbite tip
Wheels front
Bearings
Drive belt
Engine
Optional items
S510 Pedestrian
Scarifier
The S510 Pedestrian Scarifier is a
professional verti-cutting machine
on a welded robust steel frame.
Set of knives 3mm carbite tip
Blade types:
Straight blade (standard)
Thickness
Function
Number of blades
Optional
1.2mm (1/16”)
oil tempered blade
for fine scarifying
like golfgreens.
15 blades
14 extra blades
Diamond blade
Thickness
Function
Number of blades
2.8mm (1/8”)
oil tempered blade.
for hard conditions.
14 blades
Blade with offset cutting tips
Function: for aggressive scarifying.
Verti-Cut 1200
The trailed Verti-Cut 1200 scarifier
comes as a PTO driven version (r), or
as a unit powered by its own engine (l).
32
Brushing
Brushes
A variety of brushes are on offer for spreading material, or for combing the grass blades.
Model
Verti-Comb Verti-Comb Precision
1800
4000
Brush
Straight
Brush
Verti-Brush Verti-Broom Verti-Broom Pedestrian
185
240
Brush
Working width
Weight
Tractor required
1.8m (71”)
104kg (229lbs)
18hp+200kg
lift cap.
2.0m (79”)
17kg (37lbs)
12hp+30kg
lift cap.
1.7m (67”)
1.85m (73”)
170kg (374lbs)
50kg (110lbs)
13hp with double
10hp
acting valve + 10ltr
per min. at 70bar
4.0m (157”)
220kg (484lbs)
25hp+450kg
lift cap.
2.0m (79”)
150kg (330lbs)
18hp+200kg
lift cap.
2.4m (94”)
75kg (165lbs)
10hp
2.12m (83”)
18kg (40lbs)
-
Optional items Verti-Comb: Magnetic kit / Steel pins section front + rear / Drawbar + transport wheel kit (lift: mechanical or hydraulical or electrical)
Model 1800
teel
S
es
rak
Verti-Comb
Model 4000
*
r
rea
The Verti-Comb is designed for brushing and decompacting large
areas of turf quickly and efficiently. Foldable side wings can be
added to the standard Verti-Comb 1800 converting it into the
model 4000 (4.0m working width).
Magnet*
Drawbar*
Steel rakes front*
Transport
wheel kit*
The Verti-Comb 4000 is foldable resulting in a total
width of 1.22m in transport position.
*=optional items
Precision
Brush
The Precision Brush
can be equipped with
brushes containing
different types of
bristles. The height
can be accurately
adjusted.
Straight Brush
The Straight Brush contains special
soft elastic bristles and removes dew
from the grass blades, in order to
prevent diseases.
33
Brushing
Verti-Brush
The Verti-Brush levels and distributes topdressing material with powerful hydraulic brushes. The 5
counter-rotating brushes easily reach to the base of the turf to loosen and evenly redistribute fill or
can be applied to mix and level a new application. The durable poly brushes can be accurately set to a
specific depth to achieve a light surface brush-in or aggressively mix and loosen the deepest fill.
The 5 rotating brushes turn at high speed.
Verti-Broom
For brushing and striping
of turf, nothing beats
the proven Verti-Broom
(models 185+240) The
highly effective triangular
arrangement of the
brushes will straighten
and groom each grass
blade. The soft, long
wearing brushes quickly
and efficiently brush
surface infill to an even
and level finish.
Pedestrian Brush
The Pedestrian Brush weighs 18kg and is ideal
to remove the dew from grass blades and to pull
them up vertically.
Dragmat
Size
120x180cm
180x240cm
240x240cm
Stainless steel
scraper wire
mats are being
used to evenly
distribute
topdressing
material.
Weight
12kg (26lbs)
35kg (77lbs)
47kg (103lbs)
Spraying
Verti-Spray Technical specifications
The trailed VertiSpray is an excellent
tool for any turf spray
application. Easily
coupled to most
tow vehicles, the 12
volt sprayer quickly
disperses up to 300
liter disinfectants
and other liquids
such as static
reducing mixes, or
plain water to cool
the playing surface.
34
Tank size:
Hitch Type:
Weight empty:
Required tow vehicle:
Standard items:
300 liter
adjustable chevis
75kg
400kg tow capacity
boom sprayer / swath 6m + trigger spraygun 5m hose.
Renovation
Vibra-Sandmaster
The Vibra-Sandmaster injects sand into the soil, and upgrades the profile.
Model Vibra-Sandmaster
1000
1500
Weight
Working width
Working depth
Hopper capacity
Capacity/hour
Tractor requirements
1650kg (3630lbs)
1.0m (39”)
5-25cm
1100kg (2420lbs)
500-1000m2/h (5400-10800sq.ft/h)
40-60hp with creapgear +30ltrs min. hydr. oilflow+
single acting hydraulic valve with free return
+ electric connection 12V 10A
2786kg (6129lbs)
1.5m (59”)
5-25cm
1650kg (3630lbs)
1000-1500m2/h (10800-16200sq.ft/h)
65-90hp with creapgear +40ltrs min. hydr. oilflow+
single acting hydraulic valve with free return
+ electric connection 12V 10A
The Vibra-Sandmaster will effectively decompact
and surface drain the soil all in one pass. Mounted in
the front of the Vibra Sandmaster is the Verti-Quake,
which decompacts and slits the turf down to 25cm
deep. Vibrating coulter blades open up the slits and
inject sand down to between 15-20cm. A rear set of
flotation tyres gently firm up the ground leaving a level
ready-to-play surface. The Vibra Sandmaster works
with wet
or dry sand
or gravel
and shows
very little
surface disturbance.
Stone Burier
Finely tilled soil is the result of treatment with the Stone Burier.
Model
Stone Burier 105
135
170
210
180HD
210HD
250HD
300HD
Working width
Weight (in kg)
Working depth (cm)
HP required
1.35m (53”)
640 (1408)
15 (0. 6”)
40hp
1.7m (67”)
708 (1408)
15 (0. 6”)
60hp
2.1m (83”)
787 (1731)
15 (0. 6”)
65hp
1.8m (71”)
1371 (3016)
20 (0. 8”)
80hp
2.1m (83”)
1511 (3324)
20 (0. 8”)
90hp
2.5m (98”)
1736 (3819)
20 (0. 8”)
100hp
3.0m (118”)
1997 (4393)
20 (0. 8”)
110hp
1.5m (61”)
581 (1278)
15 (0.6”)
35hp
Optional items Toothed roller with scraper at the rear.
The Redexim Stone Burier buries
stones, grass and other materials
deep into the ground, leaving finely
tilled soil on the surface. It prepares
the seed-bed on any type of soil,
including hard and clayey soil,
both in the presence of stones or of
cultivation residues.
The soil is pressed through the fingers, while stones and sods are
blocked and drop in the newly created holespace.
Rotation
direction
of the blades
35
Renovation
Turf-Stripper
Renovation of the turf surface can take place with the Turf-Stripper equipped with frase blades or verti-cut blades.
Model Turf-Stripper
1200
2000
Weight
Working width
Working depth
Operational speed
Capacity/hour
Tractor required
400kg (880lbs)
1.2m (47”)
up to 50mm
0 – 3km/h
500-1000m2/h
35hp with 2x double acting hydraulic valves
1250kg (2750lbs)
2.0m (79”)
up to 50mm
0 – 3km/h
1000-1500m2/h
40-50hp with 2x double acting hydraulic valves
Optional items
extra blades / verti-cutting blades / extra rotor
The TurfStripper is a
frase-mower,
removing
turf, weeds
and thatch
from a field.
A side arm
conveyor
transports
the debris
into a trailer.
Optionally a
separate rotor
containing
verti-cut
blades can be
installed.
Frase blades (l) and verti-cut blades (r)
Redexim BV, Kwekerijweg 8, 3709 JA, Zeist, the Netherlands,
Tel: (31) 30 6 933 227, Fax: (31) 30 6 933 228,
E-mail: [email protected], http://www.redexim.com
The side-arm conveyor is folded over the machine during transport.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement