Maxstar® 161 STH

Maxstar® 161 STH
Issued Oct. 2016 • Index No. DC/27.5
Maxstar 161 STH
®
Quick
Specs
Light Industrial Applications
Processes
Process pipe
Dairy industry
Food/beverage industry
Restaurant/kitchen repair
Experimental aircraft
Shipboard installation/repair
Maintenance repair
TIG (GTAW)
Pulsed TIG (GTAW-P)
Stick (SMAW)
TIG/Stick Welding
Power Source
Amperage Range 120 V: 5–130 A (DC TIG)
20–90 A (DC stick)
240 V: 5–160 A (DC TIG)
20–160 A (DC stick)
Input Power
Max. Open-Circuit Voltage 48
120–240 V, 1-phase power
Net Weight 13 lb. (5.9 kg)
Pulse. Pulsing can increase puddle
agitation, arc stability and travel speeds
while reducing heat input and distortion.
Allows for any input voltage hookup
(120–240 V) with no manual linking,
providing convenience in any job
setting. Ideal solution for dirty or
unreliable power.
High frequency for non-contact arc
initiation that reduces tungsten and
material contamination.
Selectable trigger configuration
allows the operator to choose
standard or 2T trigger method to
meet the application.
Portable in the shop or at the
job site — at 13 pounds, the
handle/shoulder strap allows the
end user to easily move from
location to location.
Single amperage range allows
operator to accurately set amperage on
both 120- or 240-volt primary power.
Lift-Arc™ provides TIG arc initiation
without the use of high frequency.
Inverter-based, DC power source has
a simple-to-use operator interface
providing only the necessary controls
in a compact machine.
Full function remote control for
precise amperage control for critical
welds on thin materials (6-pin
fingertip or foot control available.)
Fan-On-Demand™ power source
cooling system operates only when
needed, reducing noise, energy use
and the amount of contaminants
pulled through the machine.
Thermal overload protection
helps prevent machine damage if
the duty cycle is exceeded or airflow
is blocked.
Built-in gas solenoid eliminates
the need for a bulky torch with a
gas valve.
Digital meter for more precise
control when presetting or
monitoring welding amperage.
Pro-Set™ eliminates the guesswork
when setting weld parameters. Use
Pro-Set when you want the speed,
convenience and confidence of
preset controls. Simply select the
feature and adjust until Pro-Set
appears on the display.
Hot Start™ adaptive control provides
positive arc starts without sticking.
TIG/Stick Package with Remote Fingertip Control (907711001)
comes complete with:
Maxstar 161 STH power source
6.5 ft. (2 m) 120-volt and 240-volt power cords
X-CASE™ — provides protection in transport and storage
RCCS-6M remote fingertip control (195184)
Weldcraft™ A-150 (WP-17) 12.5 ft. (3.8 m) TIG torch with connector
Stick electrode holder with 13 ft. (4 m) cable and 25 mm
Dinse-style connector
Work clamp with 10 ft. (3 m) cable and 25 mm Dinse-style connector
Flow gauge regulator with gas hose
AK2C accessory kit with short back cap, nozzles, collets, collet bodies,
and 2% ceriated tungsten electrodes (.040, 1/16, and 3/32 in.)
Handle/shoulder strap
Low OCV stick is a simple design that
reduces the open-circuit voltage to
12–16 volts when the welding power
source is not in use. This circuit
design is now built into the Maxstar
161 STH eliminating the need for
add-on voltage reducers.
Power factor corrected (PFC) for
optimum performance especially on
120 volts — reduces nuisance
breaker tripping.
Stick-Stuck detects if the electrode is
stuck to the part and turns the welding
output off to safely and easily remove
the electrode. Menu selectable.
Superior stick arc performance
even on the difficult-to-run electrodes
like E6010.
Power source is warranted for three years, parts and labor.
Original main power rectified parts are warranted for five years.
Miller Electric Mfg. Co.
Equipment Sales US and Canada MillerWelds.com
An ITW Welding Company
1635 West Spencer Street
P.O. Box 1079
Appleton, WI 54912-1079 USA
Phone: 866-931-9730
FAX: 800-637-2315
International Phone: 920-735-4554
International FAX: 920-735-4125
Specifications (Subject to change without notice.)
Welding
Amperage
Range
120 V,
15 A
5–130 A
240 V
5–160 A
120 V,
15 A
20–90 A
240 V
20–160 A
Welding
Mode
Input
Power
TIG
Stick
Rated Welding Output
Amps Input at
Rated Output,
50/60 Hz
KVA at
Duty
Cycle
KW
90 A at 13.6 VDC, 100% duty cycle
14.61
1.75
1.70
130 A at 15.2 VDC, 30% duty cycle
22.6
2.73
2.70
110 A at 14.4 VDC, 100% duty cycle
9.35
2.24
2.12
160 A at 16.4 VDC, 20% duty cycle
15.05
3.62
3.49
60 A at 22.4 VDC, 100% duty cycle
14.68
1.75
1.71
90 A at 23.6 VDC, 30% duty cycle
23.16
2.78
2.76
110 A at 24.4 VDC, 100% duty cycle
14.31
3.43
3.30
160 A at 26.4 VDC, 20% duty cycle
22.55
5.41
5.25
Max. OpenCircuit Voltage
48 VDC
(12 –16 VDC*)
Dimensions
H: 10.3 in.
(262 mm)
W: 5.6 in.
(142 mm)
D: 13.5 in.
(343 mm)
*Sense voltage for stick and Lift-Arc ™ TIG.
Certified by Canadian Standards Association to both the Canadian and U.S. Standards.
Control Panel
5
1
1. Power Switch
2. Menu Button
3. Positive Weld Output Receptacle
4. Remote Receptacle
5. Ready Light
6. Amperage Adjustment Control
7. Negative Weld Output Receptacle
2
6
3
7
4
Performance Data
Duty Cycle Chart
250
Output Amperes
200
Stick and TIG 240 V
150
TIG 120 V
100
Stick 120 V
50
0
10
20
40
% Duty Cycle
2
60
80
100
Net
Weight
13 lb.
(5.9 kg)
Maxstar 161 STH Packages
®
Standard Package 907711
Package includes:
Maxstar 161 STH power source
6.5 ft. (2 m) 120-volt and 240-volt power cords
Stick electrode holder with 13 ft. (4 m) cable and 25 mm Dinse-style connector
Work clamp with 10 ft. (3 m) cable and 25 mm Dinse-style connector
One air-cooled TIG torch connector (195234)
Handle/shoulder strap
TIG/Stick Package with Remote Fingertip Control 907711001
Packages include:
Maxstar 161 STH power source
6.5 ft. (2 m) 120-volt and 240-volt power cords
X-CASE™ — provides protection in transport and storage
RCCS-6M remote fingertip control (195184)
Weldcraft™ A-150 (WP-17) 12.5 ft. (3.8 m) TIG torch with connector
Stick electrode holder with 13 ft. (4 m) cable and 25 mm Dinse-style connector
Work clamp with 10 ft. (3 m) cable and 25 mm Dinse-style connector
Flow gauge regulator with gas hose
AK2C accessory kit with short back cap, nozzles, collets, collet bodies, and
2% ceriated tungsten electrodes (.040, 1/16, and 3/32 in.)
Handle/shoulder strap
Genuine Miller Accessories
®
Remote Controls and Switches
™
X-CASE 301429
Sturdy case provides ultimate protection for
transport and storage. Also features convenient
top carrying handle and side recessed hand
grips. Store the Maxstar 161, accessories and
gear in this generous case to be ready to go at
any time. Dimensions (H x W x D): 13 x 10.5 x
30.625 in. (330 x 267 x 778 mm).
RCCS-6M (6-pin plug)
195184 13.25 ft. (4 m) cord
195503 26.5 ft. (8 m) cord
North/south rotary-motion fingertip current/
contactor control attaches to TIG torch using
two hook-and-loop fasteners. Great for
applications that require a finer amperage
control. Includes cord and plug.
TIG Torches
Weldcraft™ Air-Cooled Torches
WP-17-12-R A-150 (WP-17)
12.5 ft. (3.8 m) TIG torch with gas thru connector.
WP-17-25-R A-150 (WP-17)
25 ft. (7.6 m) TIG torch with gas thru connector.
Air-Cooled TIG Torch
Connector 195234
25 mm (small) Dinse-style
gas thru for one-piece
air-cooled torch.
RFCS-6M (6-pin plug)
195183
13.25 ft. (4 m) cord
195504
20 ft. (6 m) cord
Foot pedal current/
contactor control. Includes cord and plug.
Female Receptacle
Full KVA Adapter Cord 300517
NEMA 14-50P to NEMA 6-50R. Adapts engine
drive 120/240 V plug to Maxstar 240 V plug.
RMS-6M (6-pin plug) 195269
Momentary-contact switch for contactor
control. Rubber-covered pushbutton dome
switch ideal for repetitive on-off applications.
Includes 26.5 ft. (8 m) cord and plug.
3
Ordering Information
Power Source and Options
Stock No.
Description
Maxstar 161 STH Standard Package
907711
Maxstar 161 STH with electrode holder, work clamp, and
120-volt and 240-volt power cords
Maxstar® 161 STH TIG/Stick Package
with Remote Fingertip Control
907711001
Includes 907711 plus X-CASE™, A-150 TIG torch, gas regulator with hose,
AK2C accessory kit, and remote fingertip control
X-CASE™ (only)
301429
Carrying case for Maxstar 161
Full KVA Adapter Cord
300517
Adapts engine drive 120/240 V plug to Maxstar 240 V plug
RCCS-6M
195184
195503
13.25 ft. (4 m) remote fingertip control
26.5 ft. (8 m), remote fingertip control
RMS-6M
195269
26.5 ft. (8 m) remote on/off control
RFCS-6M
195183
195504
13.25 ft. (4 m) remote foot control
20 ft. (6 m) remote foot control
195234
Connects the A-125, A-150 and A-80 Weldcraft torches to
25 mm gas thru Dinse-style connector
®
Qty.
Accessories
Weldcraft™ A-150 (WP-17) TIG Torch
Air-Cooled TIG Torch Connector
Date:
Distributed by:
© 2016 Miller Electric Mfg. Co.
See page 3
Total Quoted Price:
Price
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement