CEM Catalogue Issue 1.2

CEM Catalogue Issue 1.2
New_CEM_Covers 3:Layout 1 06/03/2012 10:18 Page 1
CEM AC2000
UK Product Catalogue
A Tyco International Company
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:27 Page 1
Advanced Access Solutions
CEM currently secures sites in over 40 countries around the world. CEM supports customers in a
wide range of sectors including Aviation, Healthcare, Education, Petrochemical and Retail.
CEM Customers…
Petrochemical
Healthcare
CEM’s AC2000 SE (Standard Edition) System is perfect
for petrochemical sites where security is paramount. The
CEM AC2000 SE access control system offers refineries
24 hour security through the use of intelligent card
readers and a stable security infrastructure. AC2000 SE
restricts entry to refineries as well as monitoring the
movement of authorised visitors, employees and
contractors. AC2000 SE also offers portable access
control in unpredictable petrochemical environments
where a mains power supply is not always available.
CEM’s PoE+ (Power over Ethernet Plus) access control
solution offers its
healthcare clients an easy to install solution which
minimises disruption to the facility and reduces
commissioning costs.
• Stobhill & Victoria Hospitals, UK
• Midlothian Hospital, UK
• King Khalid University Hospital, Saudi Arabia
• Baylor Medical Centre at Uptown, USA
• Lindsey Oil Refinery, UK
• Gasco Ruwais, UAE
• Jurong Island, Singapore
06/12
CEM Catalogue
Chapter 1 Page 1
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:27 Page 2
CEM Solutions…
Education
CEM solutions are installed in educational facilities around
the world, securing students, teachers, equipment and
premises. The AC2000 system controls and monitors
various buildings so that only those with correct
authorisation are permitted access to education buildings,
rooms and other restricted areas across campuses.
• Liverpool John Moores University, UK
• Latymer School, UK
• Primary schools around the world
Financials
With high security a requirement for major financial
institutions, many have chosen a CEM solution to protect
staff and customers and secure areas where security is of
the utmost importance.
• Barclays Bank, UK
• KPMG, UK & India
• Ulster Bank, UK
Other Sectors
CEM solutions are suitable for other facilities including
ports, retail sites,
casinos and corporate premises.
• Marina Bay Sands Casino, Singapore
• Shaw Studio’s Movie City, Hong Kong
• Port of Cork, Ireland
For CEM Customer Project Profiles, please visit www.
cemsys.com/casestudies
Chapter 1 Page 2
CEM Catalogue
06/12
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:27 Page 3
CEM Solutions…
CEM has a solution for all sizes. The proven CEM AC2000
product range offers reliable security management for small
through to large, multi-site applications.
Where does AC2000 fit in the Security Market?
Niche Market
Mass Market
About AC2000
At the heart of the AC2000 system is the Central Database
Computer (CDC Server), which is based on a client-server
system architecture design. The AC2000 CDC running on a
Linux operating system, provides a highly sophisticated
level of power and system resilience. AC2000 not only
utilizes CEM’s advanced range of hardware products
including intelligent card readers and Ethernet-ready
controllers, but also offers compatibility with read heads
from third party manufacturers. The use of distributed
intelligence at all levels of the system including the use of
card readers with their own database adds to the overall
resilience.
06/12
CEM Catalogue
Chapter 1 Page 3
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:27 Page 4
AC2000 Lite Edition
Integrated security management system for small to medium sites
Features
•VIPPS ID Badging
•Visitors Management
•Vehicle Management
•Zone Monitor
•Alarm Event Display (AED)
•Rolling Transaction Display
•Time & Attendance
•Advanced Reporting
•Integrated Biometrics
•User Definable Fields
•Video Integration And more!
Ideal for small to medium sized solutions, AC2000 Lite
offers a low cost, integrated access control, alarm
processing and photo badging security management
system for up to 128 doors. Encompassing the core
software features of the AC2000 SE system and with a
comprehensive suite of software applications on one CD,
AC2000 Lite sets the benchmark in the industry as one of
the most accomplished security management solutions
available for small to midrange markets.
AC2000 Lite Controller
The central component of the AC2000 Lite security
management system is the AC2000 Lite System Controller.
The system controller is an intelligent, networked device
that holds the AC2000 Lite database and controls up to
128 doors. Any client workstation on the network can
access the system controller to manage the database,
monitor alarm activity or configure devices. As a quick and
convenient method of installation, installers simply use a
web based configuration tool to perform the basic set-up
and configuration of the AC2000 Lite Controller, as well as
perform diagnostic checks and system backups. Once the
basic configuration has been completed, administrators
can then operate and fully maintain the AC2000 Lite system
via a networked Windows® based operator workstation,
with AC2000 Lite software installed.
Chapter 1 Page 4
CEM Catalogue
06/12
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:27 Page 5
AC2000 Lite Edition
AC2000 Lite System Topology
AC2000 Lite
Workstation
Operational Applications
Photo Badging
DVR System Integration Intruder System Integration
TCP/IP
Ethernet Switch
Ethernet/Serial
Converter
TCP/IP
TCP/IP
RS485
TCP/IP
S610f Ethernet finger
card reader/controller
1.2KM Max
Distance
8 Inputs
DCM Door
Controllers
4 Inputs
AC2000 Lite
System Controller
S3020 Portable
reader family
sDCM 300
two Door
Controller
S610e Card
reader/controller
EtherProx Card
reader/controller
AC2000 Lite Door Controller Options
06/12
CEM Catalogue
eDCM 300
Input/Output
Controller
AC2000 Lite I/O Controller
Up to 16
Devices
InfoProx
Card
Reader
Controller
Serial Device Support
Chapter 1 Page 5
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:27 Page 6
AC2000 Standard Edition
Powerful and fully integrated security management system
Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Ideal for medium to large scale solutions, AC2000 SE can
act as the central SMS (security management system),
offering powerful access control, alarm processing, photo
badging and integration with third party systems. Known
throughout the industry as a proven product that meets the
highest of security requirements, the AC2000 SE system
has been installed successfully at some of the largest
facilities around the world.
Chapter 1 Page 6
VIPPS ID Badging
Vehicle Management
Visitor Management
Alarm Event Display (AED)
Guard Tours
Rolling Transaction Display
Zone Monitor
Extended Reports
Time & Attendance
Unlimited User definable Fields
Configure reader messages
Muster Zones
Standard System Link
American Dynamics Intellex range
IndigoVision Video interface
Bosch /Synectics Video interface
Third party API (Application Programming Interface)
Fully Integrated Biometrics
Lift Control And more!
The AC2000 SE Server, running on the Linux operating
system, provides a highly sophisticated level of power
and system resilience, whilst Windows® based operator
workstations present the user with a familiar, easy to use
front-end interface.
AC2000 SE supports CEM’s range of industry leading
Serial and Ethernet hardware products.
CEM Catalogue
06/12
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:27 Page 7
Standard Edition
AC2000 SE System Topology
System Link to
remote AC2000
CDC Sever
AC2000 Main
System (CDC)
Camera
Backup Access
Server (Failover
CDC)
AC2000 Work
Stations
VIPPS enrolment
Workstation
DVMS Integration
ID Card
Printer
AC2000 Alarm and
Event Management
WAN
DVMS
S9032/S9064
Controller supporting
32 or 64 serial readers
TCP/IP
TCP/IP
TCP/IP
(TCP/IP)
Wireless access
point
AC2000 Main System
(CDC)
Validation
Reader
RTC Controller
supporting upto 256
Ethernet Readers
Ethernet Switch
TCP/IP
R485
TCP/IP
TCP/IP
R485
RS485
S610s serial card
sDCM
Reader Controller
300
two Door Controller
06/12
Infoprox Serial
card Reader
Controller
S3020 Portable
reader family
S610e Card EtherProx Ethernet
S610f Ethernet
Card
finger card read- reader/controller
reader/controller
er/controller
CEM Catalogue
eDCM 300
Intelligent
Two Door Controller
Chapter 1 Page 7
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:27 Page 8
AC2000 System Comparison
Criteria - Size
AC2000 Lite
10,000
128
5
Number of Cardholders
Number of Doors supported
Number of Workstations supported
AC2000 SE
Unlimited
Unlimited
172*
Criteria – Software & Functionality
Standard Software Options
AC2000 Lite comes with a range of software options on one CD as standard. Some AC2000 SE software options are charged on an
application licence basis - see price list for further details
Code
SWAED
SWVIPPS
SWTANDA
SWVISIT
Integration
SWSSL
SWDVR-AD
SWHDVR-AD
SWNVR-IV
SWNVR-SY
SWINT-GAL
SWINT-DSC
SWXML
SWAPI
SWOPCDA
SWBACNET
SWDKEY
SWPDS-FFT
SWFAIL
Other Functions
Lift Control
Database
Description
AED (Alarm Event Display) Graphical Maps Utility
VIPPS - Photo ID software
Time and Attendance Reporting
Visitor Management
Standard System Link (requires v5.4 or greater)
DVR Interface (American Dynamics Intellex® range)
American Dynamics HDVR Interface
IndigoVision NVR (Network Video Recorder) Interface
Synectics Video Interface (v6.1 upwards)
SIA Intruder System Interface (Galaxy)
SIA Intruder System Interface (DSC)
XML Interface
Application Programming Interface (API)
OPC DA Interface
BACNET Interface
Deister Keysafe Interface (v6.1 upwards)
FFT CAMS Perimeter Detection System (v6.2upwards)
Failover Server software licence
AC2000 Lite
AC2000 SE
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
Partitioning
* Per Single Server
AC2000 Interfaces are continually being developed. For more information email [email protected]
Chapter 1 Page 8
CEM Catalogue
06/12
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:27 Page 9
AC2000 Standard Software Modules
AC2000 Zone Monitor
Zone Monitoring application offers the ability for operators
to monitor the occupancy levels of a pre-defined area of the
site. A running total or count will always be visible
and updated in real time as cardholders enter or exit the
site.
A real time running total of cardholders in a defined area
aiding customers health & safety policy.
Features
• Security can visually verify cardholders & associated
events in real-time
AC2000 Rolling Transaction Display (RTD)
Rolling Transaction Display is designed to offer security a
real-time personnel & event monitoring tool. It allows staff
to visually identify cardholders prior to their gaining access
through a secure door.
Features
• Vehicle passes can be reused on other vehicles
providing cost effective use of cards/tags
See Integrations section for list of CEM compatible integrations.
AC2000 Vehicle Management
AC2000 Vehicles allows users to produce a professional
pass or vehicle tag for all vehicles, with the ability to
associate cardholders to vehicle records. The application
stores details of vehicles on the AC2000 system such as
Vehicle Make, Model and Registration number. AC2000
Vehicles also features Vehicle Anti-Passback, customised
user definable fields and the automatic disabling of vehicle
passes/tags.
06/12
CEM Catalogue
Chapter 1 Page 9
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:27 Page 10
AC2000 Enhanced Software Modules
Features
• Report Scheduler – Reports can be frequently run &
exported for management purposes
AC2000 Extended Reports
The reporting capability of AC2000 is extremely powerful.
AC2000 Extended Reports allows all AC2000 transactional
history to be automatically stored for future reporting.
Reports can be generated to run on Alarms, Personnel,
Devices e.t.c, as well as scheduled in advance for regular
review.
Chapter 1 Page 10
CEM Catalogue
06/12
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:27 Page 11
AC2000 Enhanced Software Modules
Features
• Sophisticated ID badging for staff, contractors,
visitors etc
• Passes can be individually designed and
customised to suit customer tastes
AC2000 has a comprehensive set of software applications
that enhance site operations.
Windows® based operator workstations present the user
with a familiar, easy to use front-end.
Key Applications
ID Badging
AC2000 VIPPS (Visual Imaging & Pass Production System)
The AC2000 VIPPS application gives the operator a range
of video imaging facilities for capturing personnel details,
including images, company logos and personnel
signatures and incorporating these onto professionally
designed ID passes.
AC2000 VIPPS also supports fingerprint enrolment via the
S610f Fingerprint validation reader meaning that a
biometric data capture can take place at the same time as
other data capture.
Product Codes
SYS/004/007
SWVIPPS
06/12
CEM Catalogue
AC2000 SE Workstation VIPPS workstation with VIPPS Software (VIPP2)
and video capture card installed
VIPPS - Photo ID software (UK Only)
Chapter 1 Page 11
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:27 Page 12
AC2000 Enhanced Software Modules
Features
• Enables technology cards to be issued to visitors and
then returned for future use; saving on visitor card costs
AC2000 Visitors
The AC2000 Visitors application provides a powerful tool to
monitor and control access for temporary visitor
cardholders. Visitors can be given access levels and/or
traced; allowing visitor movements to be monitored and
controlled.
AC2000 Visitors is available with AC2000 Lite and AC2000
SE version 5.0.2 and upwards.
Product Code
SWVISIT
Visitor Management
AC2000 Time and Attendance
AC2000 Time and Attendance module is a reporting tool
that offers administrators statistics on the ‘in and out’
movements of staff. The module automates time consuming
administrative tasks and provides accurate employee
attendance data that can be used with many third party
products such as a dedicated payroll system for
accounting purposes.
Product Code
SWTANDA
Time & Attendance Reporting
Features
• One user friendly and central command and control
interface for access control and video surveillance
See Integrations section for list of CEM compatible integrations.
Integrated Alarm Monitoring
AC2000 AED (Alarm & Event Display) AC2000 AED is the
integrated alarm processing software and acts as
customer’s central Security Management System (SMS),
providing one graphical user interface for the integration of
third party video systems.
AED provides dynamic and real-time graphical, audio and
text-based information on all alarms and events that occur
on the AC2000 system. AED provides users with a wealth
of useful alarms processing features including dynamic
icons representing device status, automatic zoom and
advanced navigational tools.
Product Codes
SYS/004/006
SWAED
Chapter 1 Page 12
CEM Catalogue
AC2000 SE Workstation AED (with Maps
Utility) – workstation with AED Software
(SWAED) installed & 19" Monitor
AED (Alarm Event Display) Graphical
Maps Utility (UK Only)
06/12
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:27 Page 13
AC2000 Enhanced Software Modules
Features
• Seamless integration of AC2000 SE (Standard Edition)
software with the Tyco Minerva MX Range of Fire Panels
• Activated alarms shown instantly within AC2000 AED
(Alarm & Event Display) module – Minerva panels
sensors/icons placed on AED Maps
• Fire alarms reported instantly on AC2000 AED
application for central monitoring
• Convenient and easy to integrate with existing AC2000
installations
• Support for MX Speak protocol version 3.x, 4.x and
5.0/5.1 via external MX BACnet Converter
• Graphical representation of current states for MX
Components: Points, Zones and Panels.
• MX Component state changes displayed as Alarms and
Events
AC2000 Minerva MX Fire Interface
AC2000 Minerva MX Fire Interface: This highly
cost-effective interface allows seamless integration of the
AC2000 SE system with the Tyco Minerva MX Fire
Detection System. AC2000 will act as the central Security
Management System (SMS) by enabling fire alarms for MX
Panels, Sensors and Zones within the central AC2000
Alarm and Event Display (AED) application.
Fire Interface
AC2000 Minerva MX Interface enables uni-directional
communication allowing the AC2000 system to receive fire
alarms from the Minerva MX
Range Fire Detection
System - consisting of a network of up to 99 Fire Panels.
Data Transmission Protocol Minerva MX range Fire Panel
transmits data in MX-Speak protocol which is translated by
MX BACnet Converter and passed on in BACnet protocol
via TCP/IP network to the AC2000 CDC server. The server
processes the alarm and passes it on to the AC2000
Workstation for the alarm to be displayed on the central
AC2000 AED Application.
Product Code
SWFIRE-MX
AC2000 Central Database
AC2000 Minerva MX Fire Interface
AC2000 Alarm &
Event Display
(AED Workstation)
Minvera MZX Fire
Detection System
Fire Alarm Equipment
MX BACnet
Converter
Fig.1 General functional diagram showing key elements of the Fire Notification process.
06/12
CEM Catalogue
Chapter 1 Page 13
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:27 Page 14
AC2000 Enhanced Software Modules
AC2000 AED (Alarm Event Display) application
Central Monitoring
AC2000 Minerva MX interface is seamlessly integrated
into the existing AC2000 Alarm and Event Display (AED)
application. AED provides users with a central dynamic
view / representation of all system events. MX
components and their corresponding alarms can be
centrally managed via the one AED software platform.
Fire icons can be placed onto the AED graphical maps
alongside access control readers and camera locations.
Alarms are received, processed and reported on the
AC2000 AED application for central management.
Ease of use
AC2000 Minerva MX interface does not require any complex back-end configuration. All required parameters are
configured automatically using the provided tools at the
commissioning stage. The configuration of MX
Components within AC2000 System is done in a standard
manner using the AC2000 Alarm and Event Display (AED)
application.
Chapter 1 Page 14
CEM Catalogue
06/12
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:27 Page 15
AC2000 Enhanced Software Modules
Features
• Seamless integration with American Dynamics Victor
Unified video solution
• Associate access control alarms with live video footage
• Uses AC2000 External Systems Interface to forward
alarms to Victor, including alarms generated by 3rd party
AC2000 interfaced systems such as Intruder Panels
• Victor can be configured to play a video salvo, perform
a video tour, and live camera popup footage upon an
AC2000 access control alarm
• The CEM AC2000 victor interface allows Victor users to
remotely open/close AC2000 controlled doors
• Victor can generate reports on AC2000 devices
• Available for use with AC2000 SE (Standard Edition)
AC2000 victor video Interface
AC2000 victor video Interface: AC2000 interface to
American Dynamics victor unified video solution allows
CEM AC2000 alarms to be sent to the victor unified
platform to be associated with video action. This
bi-directional interface also allows a certain level of control
such as remote door Lock/Unlock and Oneshot for
AC2000 devices from within the victor unified client.
AC2000 alarms can trigger actions such as live camera
popup, video salvos, and video tours within the victor
Client. This allows AC2000 alarms to be associated with
video footage on the victor system. AC2000 victor
interface allows victor client users to remotely execute
Access Control commands such as Open/Close AC2000controlled doors. The victor client can also generate
reports for AC2000 devices
Two-way (Bi-directional) Integration
AC2000 supports a two way interface to the victor Unified
Client. victor can receive alarms from AC2000 and also
control AC2000 devices from within the victor Client,
supporting access control features such as remote door
Lock/Unlock and Oneshot -‘remote door open’. The
AC2000 victor interface allows access control alarms to be
sent to the American Dynamics victor Unified Client where
they can be associated with video actions.
Product Code
SWVUVS-AD
06/12
CEM Catalogue
AC2000 victor Interface
Chapter 1 Page 15
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:27 Page 16
AC2000 Enhanced Software Modules
Features
• Multiple AC2000 Systems connected together
• Associate Cardholder details shared across multiple sites –
eradicating the need for travelling personnel to have extra
cards or to re enrol per site
• Live central database sharing but with continued
independent access control at each site
• Support for unlimited sites within the link
• Card details can be auto exported to global server
• Display optional system wide alarm and transaction
monitoring and reporting
• ‘Global Transaction Report’ & ‘Global Alarm Report’
• Available with AC2000SE & AC2000 Lite
AC2000 Standard System Link Multi-Site AC2000 Server Link
The AC2000 Standard System Link application offers the
ability to link multiple standalone CEM AC2000 SE and
AC2000 Lite systems together. Designed for companies with
multiple sites spread across geographical areas, Standard
System Link allows security and IT managers to globally
share card holder details/records.
With Standard System Link, card holders that are required
to travel between different sites typically do not need to be
issued with a second card or be enrolled on the remote
site(s) system. The AC2000 Standard System Link software
removes administrative duplication, allowing for seamless
multi-site access control.
Corporate security managers have central control over the
integrated AC2000 systems, whilst allowing regional offices
to independently maintain/control the local server
databases.
Standard System Link also offers the option to centrally
collate all cardholder records, alarms and transactions from
all linked sites via a Standard System Link Global Server.
This allows for the central monitoring and reporting of
global text based alarms and transactions.
With the ability to add unlimited sites within the link, the
AC2000 Standard System Link application allows for
seamless cardholder use over a globally installed access
control system.
Global sharing of cardholder data / Central database
storage
ID card enrolment can take place at any AC2000 SE or Lite
Controller, with the ability to export cardholder details to any
other linked system servers/controllers. Sharing data among
systems allows travelling staff to gain access to other sites
without having to re-enrol or be issued with another ID card;
saving duplication, administration time and saving global
card costs. Data can be automatically exported and
synchronised among sites approximately every 30 minutes
(excluding fingerprint templates, photographs and
signatures).
Global alarm & transaction reporting
Standard System Link also offers the option to globally
report on all the alarms and transactions that have occurred
on linked sites via the Global Server if required. A replica of
all site cardholders, transactions and alarms can be
automatically sent to a nominated master database for
global reporting and auditing purposes.
Unlimited sites can be linked
Such is the capability of the Standard System Link
application that an unlimited amount of sites can be
seamlessly linked together. This offers customers the benefit
of a cost effective scalable linked system without future
expansion restrictions.
Another benefit of Standard System Link is that the module
can be implemented at any time. Customers can install
separate AC2000 systems initially and then globally link
when the timing or strategy is appropriate.
Link multi site offices but maintain local AC2000 database
independence Although all sites are linked, each local
AC2000 server operates as a completely independent
system, and maintains its own separate database. Local
facility managers have responsibility for local site access
control, whilst corporate security managers have access to
global cardholder and text based alarm details via the
Global Server.
Chapter 1 Page 16
CEM Catalogue
06/12
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:27 Page 17
AC2000 Enhanced Software Modules
Local AC2000 Workstation
Site 1
Local AC2000 Workstation
Site 2
Local AC2000 Workstation
Site 3
Cardholder Details
Cardholder Details
Cardholder Details
Site 2 Cardholder Details
Site 3
AC2000
AC2000
Server/Lite Controller
Server/Lite Controller
Cardholder Details
+ Alarms
(Operational) Global Alarm
Workstation
Cardholder Details
+ Alarms
(Operational) Global Alarm Server
Global Alarms
06/12
CEM Catalogue
Chapter 1 Page 17
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:27 Page 18
AC2000 Enhanced Software Modules
Features
• Seamless integration with American Dynamics ADTVR
• Associate access control alarms with digital video footage
• Live video feed activated directly from AC2000 AED (Alarm
and Event Display) application
• Live video pop-up based on alarm priority or time
• Receive alarms from the ADTVR system
• Camera icons can be positioned in AED module alongside
access control readers
• Display up to 16 individual camera feeds simultaneously in
a single screen virtual matrix
• Adjust camera pan, tilt, and zoom via integral software
control
• Export video snapshots and clips from AC2000 software
AC2000 ADTVR Interface
The AC2000 video interface for American Dynamics
Embedded ADTVR provides the ability to associate access
control alarms with digital video clips and to view live
camera footage. This enables AC2000 to act as the central
Security Management System (SMS).
The AC2000 ‘Video Configuration’ module seamlessly
integrates AC2000 with the ADTVR, giving the operator a
range of video imaging facilities to generate alarm reports
with recorded video playback. The interface also allows
system operators to view live video feed, configure live
video popup on alarm and control camera positioning and
presets.
from the start of the footage. Standard video controls are
available on the DVR Viewer to Play, Pause, and Fast
Forward/Rewind. This footage can then be exported to a file
if required or a simple snapshot picture can be saved.
Additionally system operators can view archived video
footage by running alarms reports in the AC2000 Extended
Reports application.
Recorded Video Search and Retrieve
The DVR Viewer also allows the user to search for alarms
with video footage using various criteria which can then be
replayed by clicking on the requested alarm detail.
The high level two-way interface allows a user to fully
integrate the power of an American Dynamics ADTVR video
system into the central AC2000 AED (Alarm and Event
Display) application. AC2000 AED module enables all
alarms, events and associated camera footage to be
displayed centrally on the AC2000 system, including the
ability to receive alarms from the TVR such as video motion
and video loss.
Camera control
A camera control facility is available for moveable cameras
such as dome-based devices. The following controls are
available :
ADTVR Embedded Video Recorders
The ADTVR is an embedded DVR, making it very reliable
and competitively priced. ADTVR offers the latest features
such as high quality recording, long storage times, remote
access and alarm reporting.
Requirements
AC2000 SE v6.4 software & upwards
AC2000 Lite v6.4 software & upwards
Zoom In and Out
Camera Preset Selection
Pan + Tilt Control
Alarms with associated video
If an alarm event contains associated video footage, the
operator can access the footage within the AC2000 AED
(Alarm Event Display) application which will activate a DVR
Viewer.
Once the DVR Viewer has launched, the actual video
footage is then uploaded from the ADTVR system. The
viewer window will automatically display the video playback
Chapter 1 Page 18
CEM Catalogue
06/12
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:28 Page 19
AC2000 Enhanced Software Modules
Product Code
SWADTVR-AD
06/12
CEM Catalogue
AC2000 American
Dynamics ADTVR
Interface
Chapter 1 Page 19
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:28 Page 20
CEM Hardware
Multiple Site Application
Features
• Seamless cardholder use over a globally installed
access control system
• Report globally on Transactions and Alarms across sites
AC2000 Standard System Link
AC2000 Standard System Link offers the ability to link multisite CEM AC2000 systems together. Designed for companies with multiple sites spread across
geographical areas, Standard System Link allows security
& IT managers to globally share card holder
details/records. This removes this administrative
duplication, allowing for seamless multi-site access
control.
Product Code
SWSSL
Validation Reader to
enter new card onto the
system
Local Card Environment
Workstation
Standard System Link
Local Card Environment
Workstation
Cardholder Details
Site 2
CDC Server
Site 3
CDC Server
Cardholder Details
Validation Reader
to enter new card
onto the system
Site 1
CDC Server
Cardholder Details
Cardholder
Details
Transaction
Alarms
Cardholder
Details
Transaction
Alarms
Local
Transactions
and Alarms
Local AED
Workstation
Optional Global Master
AED Workstation
Chapter 1 Page 20
Optional Global
Master CDC Server
CEM Catalogue
06/12
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:28 Page 21
Integration- AC2000 as a Security Management System
Integration
The AC2000 system is available with interfaces to a range
of third party security systems. CEM has a dedicated
integration team which enables the development of
interfaces on request.
Acting as the central security management system, the
AC2000 system architecture also supports high levels of
integration, offering customers one central command
and control centre for access control, video, intrusion,
perimeter detection etc.
Backup Access
Server
(Failover CDC)
AC2000 Main
Server point
AC2000 Main
Server point
AC2000 Main
Server point
AC2000
Workstation(s)
AC2000 Main
Server point
AC2000 Main
Server point
AC2000 Main
Server point
S610f Ethernet
Fingerprint card
reader/controller
S3020 Portable
Reader
TCP/IP
TCP/IP
Wireless Access point
TCP/IP
TCP/IP
AC2000 Main
Server point
eDCM300
Intelligent Two
Door Controller
CCTV Integration
Building Management System Integration
HVAC
Panel
Fire Alarm
Panel
Keypad
Control
Fire
System
Server
BMS
Workstation
CCTV
Workstation
BMS
Server
DVMS
NVR
Server
Intrusion
Keypad
Perimeter
Controller
Fire System
workstation
Perimeter
Server
Perimeter & Boundary Defence Integration
Intrusion
Alarm Panel
Intrusion Detection Integration
Fire Integration
Features
• Allows simple integration to third party systems without
customisation or development
AC2000 External Systems
The AC2000 External Systems application allows AC2000
to export access control information to third party systems.
It allows the user to specify the format of alarm strings that
are to be sent to the external system.
06/12
CEM Catalogue
Chapter 1 Page 21
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:28 Page 22
AC2000 Integration - Video Interfaces
Features
• Fully integrated and seamless access control and video
solution with American Dynamics DVMS Intellex
AC2000 DVR Interface - American Dynamics Intellex® DVMS
AC2000 interfaces with American Dynamics Intellex®
video management solution, providing the ability to
associate access control alarms with digital video clips.
Using the central AC2000 AED application, a DVR Viewer
gives the operator a range of video imaging facilities to
generate alarm reports with associated live video
footage,as well as control camera positioning.
AC2000 DVR Interface Requirements:
• AC2000 version 5.0 and upwards
• American Dynamics DVR (Intellex Ultra Range, Classic
Range, LT Range or IP Range)
Product Code
SWDVR-AD
DVR Interface (American Dynamics
Intellex® range)
Features
• Seamless integration with American Dynamics HDVR
• Associate access control alarms with digital video
footage
AC2000 HDVR Interface - American Dynamics Hybrid Video Recorders
The AC2000 video interface for American Dynamics
Hybrid-DVR (HDVR) provides the ability to associate access
control alarms with digital video clips and to view live
camera footage. This enables AC2000 to act as the
central Security Management System (SMS).
AC2000 HDVR Interface Requirements:
• AC2000 v6.2 software & upwards
• American Dynamics HDVR
Product Code
SWHDVR-AD
Chapter 1 Page 22
CEM Catalogue
American Dynamics HDVR Interface)
06/12
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:28 Page 23
AC2000 Integration - Video Interfaces
Features
• Centrally manage IndigoVision alarms via AC2000
AC2000 Video Interface - IndigoVision NVR
AC2000 provides the ability to associate access control
alarms with IndigoVision digital video. The IndigoVision
interface seamlessly integrates to live and recorded video
footage on the IndigoVision Control Centre. The operator is
provided with a range of video imaging facilities to
generate alarm reports with associated video, while
simultaneously viewing live video feed. Utilising two way
communications,
AC2000 can send and receive both access control and
video alarms, allowing for a complete security and video
management system.
AC2000 Video Interface Requirements:
• AC2000 SE v6.1 software & upwards
• AC2000 IndigoVision Interface Alarm Server
• IndigoVision Alarm Server
Product Code
SWNVR-IV
IndigoVision NVR (Network Video
Recorder) Interface
Features
• Centrally manage BOSCH alarms via AC2000
• Associate live video feed directly from AC2000 AED
application
AC2000 Video Interface - Bosch
The AC2000 video interface for BOSCH provides the ability
to associate access control alarms with BOSCH CCTV and
video clips.
If an alarm event contains associated video footage, the
operator can access the footage within the AC2000 AED
(Alarm Event Display) which will enable a DVR viewer.
Product Code
SWNVR-BO
Bosch NVR (Network Video Recorder)
Interface (v6.1 upwards)
Features
• Seamless integration with Synectics Video products
AC2000 Video Interface - Synectics
The AC2000 video interface for Synectics provides the
ability to associate access control alarms with Synectics
digital video footage. This enables AC2000 to act as the
central Security Management System (SMS) and provides a
fully integrated bidirectional interface.
Product Code
SWNVR-SY
06/12
CEM Catalogue
Synectics Video Interface (v6.1 upwards)
Chapter 1 Page 23
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:28 Page 24
Integration - Non Video Interfaces
Features
• Eradicates the need to design and develope custom
interfaces
AC2000 Application Programming Interface (API)
AC2000 Application Programming Interface (API) provides
a standardised and convenient way for developers to
interface an external system into the AC2000 SE (Standard
Edition) system.
Product Code
SWAPI
Application Programming Interface
Features
• Integrated solution for access control and securing keys
and valuable equipment
• Reduces duplication of records and administration time
of two separate systems
AC2000 Deister Keysafe Interface
The CEM Deister Keysafe Interface allows select personnel
details from the AC2000 system to automatically populate
the Deister‘ proxSafe’ system. AC2000 automatically exports
a list of authorised keysafe access users, which is imported
into the proxSafe server.
Product Code
SWDKEY
AC2000 Deister Keysafe Interface (v6.1
upwards)
Features
• Fully integrates Intruder detection system with the
access control system. One seamless solution for ease
of administration
AC2000 SIA Intruder Interface
The AC2000 video interface for Synectics provides the
ability to associate access control alarms with Synectics
digital video footage. This enables AC2000 to act as the
central Security Management System (SMS) and provides a
fully integrated bidirectional interface.
AC2000 SIA Intruder Interface Requirements:
• DSC - Maxsys Range with T-Link Ethernet Communicator
(PC4020) Honeywell - Galaxy* with E080 Ethernet
module
• AC2000 v 5.7 upwards
Product Code
SWINT-GAL
Chapter 1 Page 24
CEM Catalogue
SIA Intruder System Interface (Galaxy)
06/12
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:28 Page 25
Hardware
Features
• Intelligent embedded network device for access control
and alarm monitoring with the CEM AC2000 system
• Supports up to 32 doors (64 readers IN/OUT)
• Easy software upgrade to S9064 Controller supporting 64
doors
• Battery backup available in case of power failure
• 64 MB compact flash for database with expansion
available
• Storage capacity for up to 250,000 card records
• TCP/IP based diagnostics/monitoring available via web
browser or Telnet
• Database is retained even in the event of battery backup
failure
S9032 Controller
The S9032 Controller is an intelligent networked device, for
door entry/exit control and alarm monitoring. Part of the new
generation of S9000 Controllers, the S9032 is a central
component of the fully expandable AC2000 integrated
security management system.
The S9032 Controller provides full 10/100 Base-T Ethernet
connectivity, allowing users to remotely perform database
administration and monitor alarms. The administrator can
use both Telnet and web-based user interfaces to remotely
monitor the controller status at any time. In the event of
communications failure with the host server, card
transactions and alarms are stored in memory, and will be
uploaded to the host when communications are restored.
The S9032 Controller supports two multidrop networks of
card readers with up to 16 master readers off each port (32
total).
The readers communicate with the controller using RS485
serial communications. Each master reader can
additionally support a push-button, or Exit reader for egress.
The S9032 can be easily upgraded to a S9064 Controller
offering two additional multidrop networks of card readers
from the same controller. This provides scope for the
controller to support up to 64 doors (128 readers IN/OUT).
The upgrade can be performed on site within minutes by
entering a valid license code resulting in minimal disruption
to the system operation.
Technical Specification
Physical
Size
Weight
Housing
Colour
Power
- Voltage
- Current
Consumption
- Backup Battery
Environmental
- Temperature
- Humidity
LED Indicators
Functionality
Inputs
Reader capacity
Memory
06/12
42 x 483 x 233mm
2.6Kg
19” rackmounted steel enclosure
Beige
Database
- Cardholders
Storage of up to 250,000 cards per
controller, with four access levels
and time zone definition pairs per
cardholder record.
Up to 250,000 transactions in
offline operation, depending on
amount of cardholders stored.
Custom-made Web Browser GUI
available for displaying controller
status and configuration as well as
alarm and transaction displaying. A
Telnet client can also be used for
remote diagnostics.
- Transactions
Mains power adapter 100-240Vac
(supplied).
Output voltage 12Vdc @ 2.0A
300mA
Internal Lithium Ion battery giving
a minimum of three hours backup
time.
Power fail reported to system
internally.
-10o to 50oC
95% non condensing
Online/Offline, Ethernet
connection,
Activity/Status, Power and
Heartbeat
Dedicated Tamper Input
Dedicated Power Fail Input
Two Optically isolated RS485
multidropped reader networks,
each supporting up to 16 doors
(32 readers IN/OUT per port)
10MB of RAM
28kB Boot Loader ROM
32MB Compact Flash Disk
Configuration
Commincation Interface
To Card Reader
RS485 multidrop cable runs using
copper wire with maximum length
of 1.2km without repeater
RJ45
- Connection
To System Host
Ethernet 10/100 BaseT
- Connection
RJ45
Product Code
DAC/390/032
CEM Catalogue
S9032 Controller
Chapter 1 Page 25
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:28 Page 26
Hardware
Features
• Intelligent embedded network device for access control
and alarm monitoring with the CEM AC2000 system
• Supports up to 64 doors (128 readers IN/OUT)
• Battery backup available in case of power failure
• 64 MB compact flash for database with expansion
available
• Storage capacity for up to 250,000 card records
• TCP/IP based diagnostics/monitoring available via web
browser or Telnet
• Database is retained even in the event of battery backup
failure
S9064 Controller
The S9064 Controller is an intelligent networked device, for
door entry/exit control and alarm monitoring. Part of the
new generation of S9000 Controllers, the S9064 is a central
component of the fully expandable AC2000 integrated
security management system.
The S9064 Controller supports four multidrop networks of
card readers with up to 16 master readers off each port (64
total). The readers communicate with the controller using
RS485 serial communications. Each master reader can
additionally support a push-button, or Exit reader for egress
control.
The S9064 Controller provides full 10/100 Base-T Ethernet
connectivity, allowing users to remotely perform database
administration and monitor alarms. The administrator can
use both Telnet and web-based user interfaces to remotely
monitor the controller status at any time. In the event of
communications failure with the host server, card
transactions and alarms are stored in memory, and will be
uploaded to the host when communications are restored.
Technical Specification
Physical
Size
Weight
Housing
Colour
Power
- Voltage
Output voltage
- Current
- Backup
Environmental
- Temperature
- Humidity
LED Indicators
Functionality
Inputs
Reader capacity
Memory
Chapter 1 Page 26
42 x 483 x 233mm
2.6Kg
19” rackmounted steel enclosure
Beige
Database
- Cardholders
Storage of up to 250,000 cards per
controller, with four access levels
and time zone definition pairs per
cardholder record.
Up to 250,000 transactions in
offline operation, depending on
amount of cardholders stored.
Custom-made Web Browser GUI
available for displaying controller
status and configuration as well as
alarm and transaction displaying.
A Telnet client can also be used for
remote diagnostics.
- Transactions
Mains power adapter 100-240Vac
(supplied)
12Vdc @ 2.0A
Consumption 300mA
Battery Internal Lithium Ion
battery
giving a minimum of
three hours
backup time.
Power fail reported to system
internally.
-10o to 50oC
95% non condensing
Online/Offline, Ethernet
connection,
Activity/Status, Power and
Heartbeat
Dedicated Tamper Input
Dedicated Power Fail Input
Four Optically isolated RS485
multidropped reader networks,
each supporting up to 16 doors
(32 readers IN/OUT per port)
10MB of RAM
28kB Boot Loader ROM
32MB Compact Flash Disk
Configuration
Commincation Interface
To Card Reader
RS485 multidrop cable runs using
copper wire with maximum length
of 1.2km without repeater
RJ45
- Connection
To System Host
Ethernet 10/100 BaseT
- Connection
RJ45
Product Code
DAC/390/064
CEM Catalogue
S9064 Controller
06/12
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:28 Page 27
Cards and Readers
Which readers to use?
CEM readers are the most advanced readers in the industry, featuring a Keypad
for PIN security, an LCD display for reader messages and an internal database for
offline operation at the secure door. Some customers may choose to install S610e
readers at the building entry and exit, with S610f fingerprint readers then installed at
high security areas in the building such as server rooms.
CEM Reader range
“CEM readers
are the most
advanced readers
in the industry.”
S610f Fingerprint Reader
For security critical areas such
as server rooms.
DCM (Door Control Module)
Intelligent two door controller
To interface two ADT iCLASS
readers to either AC2000 Lite or
SE.
S610 Reader
For external doors
06/12
S3020 Portable Reader range
For roaming checks inside and
outside the premises
CEM Catalogue
Chapter 1 Page 27
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:28 Page 28
Cards and Readers - Door Hardware
Features
•
•
•
•
•
•
•
•
•
•
•
Support for two doors
On-board 10/100 Mbps Ethernet
Communicates directly with the central system
Structured database allows storage of large amounts of
cardholder records for off-line card validation
Reader communications via standard Wiegand or Mag
Stripe interfaces
Eight supervised inputs (four available per door)
Two relays (normally opened or closed) and open
collector outputs
Self resetting fuses – saves maintenance time
Onboard LED - provides visual status
Dedicated tamper input
Suitable for use with AC2000 family: AC2000 Lite AC2000
SE (Standard Edition) AC2000 AE (Airport Edition)
eDCM 300 Intelligent Two Door IP Controller
The eDCM 300 (Door Control Module) is a low cost,
two-door controller designed to interface third-party read
heads with the CEM range of access control systems.
The eDCM 300 supports most third-party access control
read heads conforming to the physical Wiegand/Mag Stripe
(data/data, clock/data) interfaces, covering a range of
technologies from RF Proximity to Biometric devices.
The eDCM 300 has an on-board 10/100 Ethernet
connection and communicates directly with the AC2000
central system. Using a powerful 32bit processor, the eDCM
300 gives full off-line validation and decision making capability at the point of entry, when host communication is not
available.
The eDCM 300 supports two door configurations. It can
either be configured for two read heads on two separate
doors, with optional Exit push buttons, or can be
configured to support two reader heads (an Entry/Exit
configuration) for bi-directional control on a single door.
Technical Specification
Physical
Size - Board Only
- Enclosure
Weight - Board Only
- Enclosure
Housing
Colour
Power Board Only:
- Voltage
- Current
Consumption
Enclosure:
- Voltage
- Current
Consumption
Backup Battery
Environmental
- Temperature
LED Indicators
192 x 145 x 20mm
460 x 250 x 90mm
0.1Kg
5.00kg
Wall mount 1.2mm steel enclosure
Grey
Functionality
Inputs
9 – 14Vdc
170mA (excluding locks and
heads)
Outputs
220-230 VAC 50/60Hz
Reader capacity
200mA (excluding locks and
heads)
Integral charging circuit provided
with enclosure and space battery
(Battery not supplied)
-10° to 55°C
Power, Link to host, Comms Tx/Rx,
Fault /Tamper, Lock and Relay
Status
Configuration
Database memory
Cardholders
Transactions
RTC Battery Backup
Configuration
* Door Position
* Lock Status
* Exit Push Button
* General Purpose
Power Fail
Tamper
Battery Low (reported internally)
Dedicated Power Fail Input
* = 4 state tamper protected inputs
Two Relays rated at [email protected]
Two 12V open collector outputs
limited to 1.5A (Door Lock and
External Sounder)
2 Weigand/Mag Stripe interfaces
(data/data, clock/data)
Operational parameters are down
loaded from host computer
1GB SD Card
Storage up to 200,000 cardholders
at the door
Up to 8,000 transactions in offline
operation
3.0V rechargeable LithiumOperational parameters are down
loaded from host computer
Product Codes
DCM/300/004
DCM/300/101
Chapter 1 Page 28
CEM Catalogue
eDCM 300 (Board Only)
eDCM 300 (Includes enclosure,
board & power supply/battery charger)
06/12
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:28 Page 29
Cards and Readers - Door Hardware
Features
• Intelligent two door controller supporting 3rd party read
heads
• Support for two doors
• On-board 10/100 Mbps PoE+ Ethernet connectivity to
power the reader and doors via a single CAT5e/6 cable–
no local mains power required
• Communicates directly with the central AC2000 access
control system
• Database supports 200,000 cardholder records for offline card validation
• Reader communications via standard Wiegand
interfaces
• Eight supervised inputs (four available per door
• Four outputs (2 per door)
• Self resetting fuses – saves maintenance time
• Onboard LED provides visual status information
• Dedicated tamper input
• Suitable for use with AC2000
System family:
AC2000 Lite
AC2000 SE (Standard Edition)
AC2000 AE (Airport Edition)
eDCM 330 Intelligent two door PoE+ Controller
The eDCM 330 (Door Control Module) is a low cost, twodoor controller designed to interface third-party read heads
with the CEM range of access control systems. The eDCM
330 also combines Power over Ethernet Plus (PoE+)
connectivity, which powers all door furniture and two heavy
duty maglocks via a single CAT 5e/6 network cable.
Featuring PoE+ connectivity, the eDCM 330 has the benefit
of eliminating the need for an external local mains power
supply at the door. This is particularly beneficial where
local power is not readily available or where cabling must
be kept to a minimum. Using just a single Cat 5e/6 cable to
power the door(s), the eDCM 330 unit can offer significant
cost savings.
Using a powerful 32bit processor, the eDCM 330 has a
large internal database that can store up to 200,000 cardholder records. This gives full off-line card validation and
decision making capability at the point of entry, when host
communication is not available.
The eDCM 330 supports most third-party access control
read heads conforming to the physical Wiegand
(data/data)
interfaces, covering a range of technologies from RF
Proximity to Biometric devices.
The eDCM 330 supports two door configurations. It can
either be configured for one read head on each separate
door, with optional Exit push buttons, or can be configured
to support two reader heads (an Entry/Exit configuration)
Technical Specification
Product Codes
Physical
Size:
Weight:
Housing:
Power
- Power requirement:
DCM/330/101
460x250x90mm
3.75kg
steel enclosure / Colour Beige
CEQ/576/001
CEQ/576/004
Voltage PoE+ dependant 802.3at
compliant 45 to 56 Volts dc
- PoE Output voltage: 12Vdc @ 2.0A
- Current Consumption 200mA (excluding locks and
heads)
- Backup Battery:
Integral charging circuit provided
with enclosure and space battery
(Battery not supplied)
06/12
CEQ/576/008
CEQ/576/016
CEM Catalogue
eDCM 330 components mounted in
enclosure.
Phihong PoE MidSpan device – 1
Port (PoE36u-1AT)
Phihong PoE MidSpan device – 4
Port (PoE125u-4AT)
Phihong PoE MidSpan device - 8 Port
(POE576U-8AT)
Phihong PoE MidSpan device - 16
Port (POE576U-16AT)
Chapter 1 Page 29
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:28 Page 30
Cards and Readers - Door Hardware
Features
• Support for two doors
• RS485 host connection
• Structured database allows storage of large amounts of
cardholder records for off-line card validation
• Reader communications via standard Wiegand or Mag
Stripe interfaces
• Eight Supervised inputs (four available per door)
• Two Relays (normally opened or normally closed)
• Self resetting fuses – saves maintenance time
• Onboard LED - provides visual status
• Dedicated Tamper input
• Suitable for use with AC2000 SE (Standard Edition), AE
(Airport Edition) and Lite (using an Ethernet
Communication Module (ECM
sDCM 300 Two Door Intelligent Serial Controller
The sDCM 300 (Door Control Module) is a low cost,
two-door controller designed to interface third-party read
heads with the CEM range of access control systems.
The sDCM 300 communicates with the AC2000 host
system via RS485 communications to an S9032/64 serial
controller or by TCP/IP using the Ethernet Communications
Module (ECM). Using a powerful 32bit processor, the sDCM
300 gives full off-line validation and decision making at the
point of entry, even when host communication is not available.
The sDCM 300 supports most third-party access control
read heads conforming to the physical Wiegand/Mag Stripe
(data/data, clock/data) interfaces covering a range of
technologies, for example RF Proximity. Customised
solutions are also available using two high speed serial
RS485/RS232 interfaces to support non-standard devices
such as, read/write smartcards and crypto modules.
The sDCM 300 supports two door configurations. It can
either be configured for two read heads on two separate
doors, with optional Exit push buttons, or can be
configured to support an Entry/Exit configuration for
bi-directional control on a single door.
Technical Specification
Product Codes
Physical
Size - Board Only
- Enclosure
Weight - Board Only
- Enclosure
Housing Wall mount
Colour
Power
- Voltage
- Current
Consumption
DCM/310/004
DCM/310/101
- Voltage
Backup Battery
Environmental
- Temperature
LED Indicators
Chapter 1 Page 30
180 x 120 x 20mm
460 x 250 x 90mm
0.1Kg
5.00kg
1.2mm steel enclosure
Grey
Board Only:
11 – 15Vdc
sDCM 300 (Board Only)
sDCM 300 (Includes enclosure,
board & power supply/battery charger)
170mA (excluding locks and
heads)
Enclosure:
220-230 VAC 50/60Hz.
Integral charging circuit provided
with enclosure and space battery
(Battery not supplied).
-10° to 55°C
Power, Link to host, Comms Tx/Rx,
Fault / Tamper, Lock and Relay
Status
CEM Catalogue
06/12
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:28 Page 31
Cards and Readers - Door Hardware
Features
• Low cost serial to ethernet converter
• RS485 connection for multidropping up to 16 CEM serial
devices on one chain
• 10/100Mbps Ethernet through an RJ45 connection
• Configuration connection with Tibbo Device Server
Toolkit
• Transparent connection between the CEM serial devices
and the AC2000 Lite controller or the AC2000 SE
Ethernet reader controller (RTC)
ECM Ethernet Communication Module
The ECM (Ethernet Communication Module) is a serial to
ethernet converter that enables CEM serial communication
devices (such as the S610s reader range, InfoProx reader
and the DCM 300), to connect to the AC2000 central system via an Ethernet LAN.
This provides a cost effective means of connecting groups
of serial readers to the AC2000 system from a single
Ethernet point.
Simply load the software & configuration file supplied on
the CD, and enter the network details.
A chain of up to 16 RS485 CEM devices can be connected
to a single ECM (up to a maximum distance of 1.2 KM).
Technical Specifications
Product Code
Physical
Size
Weight
Housing
Housing colour
Power
- Voltage
- Current
Consumption
Environmental
Temperature
LED Indicators
ECM/200/000
Tibbo LED Indicators
140 x 110 x 35mm
0.2Kg
Plastic enclosure or PCB only
Beige
ECM (Complete with
PSU and Enclosure)
12Vdc
250mA (excluding reader)
-10°C to 55°C
+12 Volts Power
RS485 Rx and Tx
Ethernet 100BaseT
Ethernet Link
Status Red
Status Green
Functionality
Inputs
10/100MB Ethernet via RJ45
connector
RS232 via DB9 connector
Outputs
RS485 via 2 part screw terminal
Reader Power Output 12V, limited to 750mA (MAX) to
power a single CEM reader. Excludes
lock power
Configuration
Configurable via Device Server
Toolkit, telnet or serial connection
Communication Interface
To Host
10/100 Base-T TCP/IP using
CAT5/6 Unshielded twisted pair
Cable
Connection
RJ45
To RS485 Card Reader RS485 multidrop cable runs using
using Belden 8723 with maximum
length of 1.2km without repeater
Connection
2 part screw terminal
06/12
CEM Catalogue
Chapter 1 Page 31
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:28 Page 32
Cards and Readers - HID iCLASS
HID 13.56MHz Proximity iCLASS
Features
• Encrypted communications - advanced security between
card and reader
• Technology that meets a wide range of industry
standards - multiple applications from one card
• Choice of credential and reader styles - designs to meet
most smart card requirements
• Third party partners - a large number of HID approved
companies to choose from for non physical access
control applications
• Secure formats - available in open or closed Wiegand
formats to suite the application (including ADT EMEAs
own tracked format)*
*A tracked format ensures that no card duplication can take place
iCLASS
HID Global provides a wide variety of 13.56 MHz credentials
including cards, tags and keyfobs. Some credentials also
include combination technology, used in upgrading endusers from 125 kHz proximity to the benefits of 13.56 MHz
smart card technology. These multiple technology
credentials are ideal for companies preparing to transition
from proximity technology to the additional speed and
applications of high frequency smart card solutions.
Optimised to make physical access control more powerful,
iCLASS® 13.56 MHz read/write contactless smart card
technology provides versatile interoperability and is used in
a wide range of applications including access control,
network log-on security, automotive vehicle identification,
cashless vending, time and attendance, event management
and biometric verification. Multiple securely separated files
enable numerous applications and can support future
capabilities.
iCLASS smart cards and readers make access control more
powerful, more versatile, and most important of all, offers
enhanced security through encryption and mutual
authentication. At the same time, iCLASS is user-friendly,
delivering the convenience, affordability and reliability of
proximity technology for which HID is known worldwide.
Encrypted Communication
The communication between an iCLASS reader and card is
encrypted using a secure algorithm so the transaction
between the card and reader cannot be "sniffed" and
replayed to a reader. The encryption protocol uses a
combination of diversified keys, unique 64-bit card serial
numbers and mutual card and reader authentication.
Capability to Add Other Applications
The iCLASS chip not only stores HID access control
information, it also has memory space available for other
applications. iCLASS cards are currently available with 2k
bit, 16k, and 32k bit memory capacities, and depending on
the amount of memory available and the number of memory
areas, iCLASS cards can serve as multi-application
credentials that can be used for many purposes.
Since the memory can securely store any kind of
information, applications for iCLASS include biometrics,
secure computer/network authentication, health record
management, time and attendance, digital cash (cafeteria &
vending) and many, many more.
Imagine an affordable, single-card, contactless solution that
allows you to not only read data securely and quickly, but
also to securely write data to the card for many applications.
ADT EU Tracked Format
At this time three Wiegand Formats have been set up in JDE for the selected stock coded range of cards and tags. This
includes 26bit Wiegand, a 34bit tracked format generally available to all companies and used for all of our standard
products including the Galaxy Dimension range PLUS an ADT Europe 39bit tracked format. This is exclusive to ADT and is
tracked by HID to ensure that there is no duplication of card ID AND secures future card business to your group.
Chapter 1 Page 32
CEM Catalogue
06/12
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:28 Page 33
Cards and Readers - HID iCLASS
Features
• 13.56 MHz read/write contactless smart card technology
provides high-speed, reliable communications with high
data integrity.
• iCLASS technology ensures high security with mutual
authentication, encrypted data transfer, and 64-bit
diversified keys for read/write capabilities.
• Any existing HID format can be factory or field
programmed into the secure HID access control
application area.
• Available in 2k bit (256 Byte), 16k bit (2K Byte) or 32k bit
(4K Byte) configurations.
• Meets ISO standards for thickness for use with all direct
image and thermal transfer printers
• Add a magnetic stripe, barcode, anti-counterfeiting, or
photo ID.
iCLASS Cards
The iCLASS Card offers iCLASS 13.56 MHz contactless
read/write smart card technology along the ability to add a
magnetic stripe, barcode, and anti-counterfeiting features
including custom artwork or a photo identification directly
on the credential.
The iCLASS Card meets strict ISO thickness standards for
use with direct image and thermal transfer printers.
Offers extremely consistent read range. Unaffected by body
shielding or variable environmental conditions. Can be
carried with credit cards in a wallet or purse. Use with a
strap and clip as a photo ID badge.
Print directly to the card with a direct image or thermal
transfer printer. Slot punch vertically for easy use. This is a
passive card technology, the no-battery design allows for
an estimated minimum 100,000 reads.
All 16k bit (2k Byte) and 32k bit (4k Byte) iCLASS
credentials have the following features:
• Sufficient read/write memory to store multiple biometric
templates.
• 16k available in a two or sixteen application area
configuration. 32k available with 16k memory configured
in either 2 or 16 application areas, plus an additional 16k
user configurable memory.
• Multiple securely separated files enable numerous
applications, including the HID standard access control
application, and support future growth.
• Meets ISO 15693 and 14443B for contactless
communications.
All 2k bit (256 Byte) iCLASS credentials have the following
features:
• Available in two application area configuration only.
• Provides the HID standard access control application area
and one other application area for user customization.
• Meets ISO 15693 standard for contactless
communications.
• Provides a cost effective way to improve the security of
your access control installation.
06/12
CEM Catalogue
Chapter 1 Page 33
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:28 Page 34
Cards and Readers - HID iCLASS
Technical Specifications
Typical Maximum Read Range*
R10 2.0-3.0" (5.0-7.6cm)
R30/RW300 2.0-3.5" (5.0-8.9cm)
R40/RW400 2.5-4.5" (6.3-11.4cm)
RK40/RWK400 3.0-4.0" (7.6-10.1 cm)
*Subject to environmental conditions.
RF Interface
As suggested by ISO/IEC:
15693 read/write
14443B mode - 106 kbps
Transaction Time
<100 ms typical
Dimensions
5.40 x 8.57 x 0.084 cm max.
Weight
5.7 g
Baud Rate
14443 B2 mode - 212 kbps
15693 mode - 26 kbps
Card Construction
Thin, flexible polyvinyl chloride (PVC) laminate.
Memory Type
EEPROM, read/write
Operating Temperature
-40° to 70° C
Operating Humidity
5-95% non-condensing
Multi-application Memory
2k bit (256 Byte) card - 2 application areas
16k bit (2k Byte) card - 2 or 16 application areas
32k bit (4k Byte) card - 16k bits in 2 or 16 application areas
plus 16k bits user configurable.
Operating Frequency
13.56 MHz
Write Endurance
Min. 100,000 cycles
Data Retention
10 years
Product Codes
26bit Weigand Format - H10301
2000PGGMN-H10301
iCLASS ISO card - 2k bits with 2
application areas. Supplied plain white on
both sides - encoded for 26bit Wiegand.
Order must state site code and ID range order in multiples of 50
2002PGGMN-H10301
iCLASS ISO card - 16k bits with 16
application areas. Supplied plain white on
both sides - encoded for 26bit Wiegand.
Order must state site code and ID range order in multiples of 50
Tracked 37bit Weigand Format - H10302
2000PGGMN-H10302
iCLASS ISO card - 2k bits with 2
application areas. Supplied plain white on
both sides - encoded for tracked 37bit
Wiegand. Order in multiples of 50. The
next available number range will be
supplied.
2002PGGMN-H10302
iCLASS ISO card - 16k bits with 16
application areas. Supplied plain white on
both sides - encoded for tracked 37bit
Wiegand. Order in multiples of 50. The
next available number range will be
supplied.
Chapter 1 Page 34
CEM Catalogue
06/12
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:28 Page 35
Cards and Readers - HID iCLASS
Features
• The iCLASS 13.56 MHz read/write contactless smart key
technology provides high-speed, reliable communications
with high data integrity.
• iCLASS technology ensures high security with mutual
authentication, encrypted data transfer, and 64-bit
diversified keys for read/write capabilities.
• Any existing HID format can be factory or field
programmed into the secure HID access control
application area.
• Available in 2k bit (256 Byte), 16k bit (2k Byte) or 32k bit
(4k Byte) configurations.
• Molded plastic enclosure provides durability in harsh
environments.
• Can be placed on a key ring or clipped to a lanyard for
convenient entry.
iCLASS Smart Key
The iCLASS Key provides the convenience of iCLASS 13.56
MHz contactless read/write smart card in a molded plastic
key fob enclosure that is durable in a harsh environment.
This key fob is the size of a typical automotive key and
offers custom artwork printing capabilities directly on the
key fob credential. You now can offer a credential that can
be placed on a key ring or lanyard for such diverse
applications including access control, network log-on
security, automotive vehicle identification, cashless
vending, time and attendance, and biometric verification.
iCLASS® was specifically designed to make access control
more powerful, more versatile, and more secure. All radio
frequency data transmission between the key and reader is
encrypted using a secure algorithm. By using industry
standard encryption techniques, iCLASS reduces the risk of
compromised data or duplicated keys. For even higher
security, the key data may also be protected with
DES or triple DES encryption. Multiple securely separated
application areas are each protected by 64-bit diversified
read/write keys which allow complex applications and
provide for future expansion.
Security mechanisms such as mutual authentication and
encryption are efficiently combined with fast processing and
data communication, resulting in transaction times of less
than 100 milliseconds for a typical secure e-purse transaction.
06/12
CEM Catalogue
Additional Benfits
All 2k bit (256 Byte) iCLASS credentials have the following
features:
• Available in two application area configuration only.
• Provides the HID standard access control application area
and one other application area for user customization.
• Meets ISO 15693 standard for contactless
communications.
• Provides a cost effective way to improve the security of
your access control installation.
All 16k bit (2k Byte) and 32k bit (4k Byte) iCLASS
credentials have the following features:
• Sufficient read/write memory to store multiple biometric
templates.
• 16k available in a two or sixteen application area
configuration. 32k available with 16k memory configured
in either 2 or 16 application areas, plus an additional 16k
user configurable memory.
• Multiple securely separated files enable numerous
applications, including the HID standard access control
application, and support future growth.
• Meets ISO 15693 and14443B for contactless
communications.
Chapter 1 Page 35
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:28 Page 36
Cards and Readers - HID iCLASS
Technical Specifications
RF Interface
As suggested by ISO/IEC:
14443B read/write (16k only)
15693 read/write
Typical Maximum Read Range*
R10 1.0” (2.5 cm)
R30/RW300 1.0” (2.5 cm)
R40/RW400 1.0” (2.5 cm)
RK40/RWK400 1.0” - 1.5” (2.5 cm - 3.8 cm)
*Dependent upon installation conditions.
Transaction Time
<100 ms typical
Dimensions
3.43 x 3.18 x 3.84 cm
Baud Rate
14443B mode - 106 kbps
15693 read/write - 26 kbps
Weight
4.9g
Memory Type
EEPROM, read/write
Multi-application Memory
2k bit (256 Byte) key – 2 application areas
16k bit (2k Byte) key – 2 or 16 application areas
32k bit (4k Byte) card – 16k bits in 2 or 16 application areas
plus
16k bit user configurable.
Keyfob Construction
Ultrasonically welded polycarbonate shell.
Operating Temperature
-40° to 70° C
Operating Humidity
5-95% non-condensing
Write Endurance
Min. 100,000 cycles
Operating Frequency
13.56 MHz
Data Retention
10 years
Product Codes
26bit Weigand Format - H10301
2050PKNMN-H10301
iCLASS contactless smart Key - 2k bits
with 2 application areas. Supplied plain
white on both sides - encoded for 26bit
Wiegand. Order must state site code and
ID range - order in multiples of 100
2052PKNMN-H10301
iCLASS Contactless Smart Key - 16k bits
with 16 application areas. Supplied plain
white on both sides - encoded for 26bit
Wiegand. Order must state site code and
ID range - order in multiples of 100
Tracked 34bit Weigand Format - H10302
2050PKNMN-H10302
iCLASS Contactless Smart Key - 2k bits
with 2 application areas. Supplied plain
white on both sides - encoded for tracked
34bit Wiegand. Order in multiples of 100
The next available number range will be
supplied.
2052PKNMN-H10302
iCLASS Contactless Smart Key - 16k bits
with 16 application areas. Supplied plain
white on both sides - encoded for tracked
34bit Wiegand. Order in multiples of 100
The next available number range will be
supplied.
Chapter 1 Page 36
CEM Catalogue
06/12
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:28 Page 37
Cards and Readers - HID iCLASS
Features
• 13.56 MHz read/write contactless smart card technology
provides high-speed, reliable communications with high
data integrity.
• iCLASS technology ensures high security with mutual
authentication, encrypted data transfer, and 64-bit
diversified keys for read/write capabilities.
• Any existing HID format can be factory or field
programmed into the secure HID access control
application area.
• Available in 2k bit (256 Byte), 16k bit (2K Byte) or 32k bit
(4K Byte) configurations.
iCLASS Tag
The iCLASS Tag provides the convenience of iCLASS
technology in a coin-sized, disk-shaped transponder
that can be simply attached to any nonmetallic card or
device to instantly have 13.56 MHz read/write contactless
smart card technology to utilize as a transition device
during the rebadging process. You can seamlessly upgrade
from Wiegand, magnetic stripe or barium ferrite
technologies and can easily and costeffectively turn an
existing plastic ID badge or contact smart card into a
contactless proximity credential.
iCLASS® was specifically designed to make access control
more powerful, more versatile, and more secure. All radio
frequency data transmission between the tag and reader is
encrypted using a secure algorithm. By using industry
standard encryption techniques, iCLASS reduces the risk of
compromised data or duplicated tags. For even higher
security, the tag data may also be protected with DES or
triple-DES encryption. Multiple securely separated
application areas are each protected by 64-bit diversified
read/write keys which allow complex applications and
provide for future expansion.
Security mechanisms such as mutual authentication and
encryption are efficiently combined with fast processing
and data communication, resulting in transaction times of
less than 100 milliseconds for a typical secure e-purse
transaction.
06/12
CEM Catalogue
Additional Benefits
All 2k bit (256 Byte) iCLASS credentials have the following
features:
• Available in two application area configuration only.
• Provides the HID standard access control application
area and one other application area for user
customization.
• Meets ISO 15693 standard for contactless
communications.
• Provides a cost effective way to improve the security of
your access control installation.
All 16k bit (2k Byte) and 32k bit (4k Byte) iCLASS
credentials have the following features:
• Sufficient read/write memory to store multiple biometric
templates.
• 16k available in a two or sixteen application area
configuration. 32k available with 16k memory configured
in either 2 or 16 application areas, plus an additional 16k
user configurable memory.
• Multiple securely separated files enable numerous
applications, including the HID standard access control
application, and support future growth.
• Meets ISO 15693 and 14443B for contactless
communications.
Chapter 1 Page 37
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:28 Page 38
Cards and Readers - HID iCLASS
Technical Specifications
Typical Maximum Read Range*
R10 1.0” (2.5 cm)
R30/RW300 1.0” (2.5 cm)
R40/RW400 1.0” (2.5 cm)
RK40/RWK400 1.0” - 1.5” (2.5 cm - 3.8 cm)
*Dependent upon installation conditions.
RF Interface
As suggested by ISO/IEC:
14443B read/write (16k only)
15693 read/write
Transaction Time
<100 ms typical
Dimensions
Diameter: 1.285” (3.264 cm)
Thickness: 0.070” (0.178 cm)
Baud Rate
14443B mode - 106 kbps
15693 mode - 26 kbps
Weight
1.18 g
Outer Shell Material
Lexan
Memory Type
EEPROM, read/write
Operating Humidity
5-95% non-condensing
Multi-application Memory
2k bit (256 Byte) tag – 2 application areas
16k bit (2k Byte) tag – 2 or 16 application areas
32k bit (4k Byte) card – 16k bits in 2 or 16 application areas
plus
16k bits user configurable.
Operating Frequency
13.56 MHz
Write Endurance
Min. 100,000 cycles
Operating Temperature
-40° to 70° C
Data Retention
10 years
Product Codes
26bit Weigand Format - H10301
2060PSSMU-H10301
iCLASS Contactless Smart Key - 2k bits
with 2 application areas. Supplied in grey
with internal number injetted on the tag.
Encoded for 26bit Wiegand Format. Order
must state site code and ID range - order in
multiples of 100
2062PSSMU-H10301
iCLASS Contactless Smart Key - 16k bits
with 16 application areas. Supplied in grey
with internal number injetted on the tag.
Encoded for 26bit Wiegand Format. Order
must state site code and ID range - order in
multiples of 100
Tracked 34bit Weigand Format - H10302
2060PSSMU-H10302
iCLASS Contactless Smart Key - 2k bits
with 2 application areas. Supplied in grey
with internal number injetted on the tag.
Encoded for 34bit Tracked Wiegand
Format. The next number range will be
supplied. Order in multiples of 100
2062PSSMU-H10302
iCLASS Contactless Smart Key - 16k bits
with 16 application areas. Supplied in grey
with internal number injetted on the tag.
Encoded for 34bit Tracked Wiegand
Format. The next number range will be
supplied. Order in multiples of 100
Chapter 1 Page 38
CEM Catalogue
06/12
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:28 Page 39
Cards and Readers - HID iCLASS
Features
• 13.56 MHz read/write contactless smart card and 125 kHz
technology provides high-speed, reliable
communications with high data integrity.
• iCLASS technology ensures high security with mutual
authentication, encrypted data transfer, and 64-bit
diversified keys for read/write capabilities.
• Any existing HID format can be factory or field
programmed into the secure HID access control
application area.
• Available in 2k bit (256 Byte), 16k bit (2K Byte) or 32k bit
(4K Byte) configurations.
• Meets ISO standards for thickness for use with all direct
image and thermal transfer printers.
• Add a magnetic stripe, barcode, anti-counterfeiting, or
photo ID.
iCLASS Prox Card
The iCLASS Prox Card combines iCLASS 13.56 MHz
contactless read/write smart card and Prox 125 kHz
proximity technology on a single card with the ability to add
magnetic stripe, barcode, and anti-counterfeiting features
including custom artwork or a photo identification directly
on the credential. Your iCLASS Prox Card can now be
utilized for such diverse applications including access
control, network log-on security, automotive vehicle
identification, cashless vending, time and attendance, and
biometric verification. As you integrate and/or migrate to an
iCLASS platform from proximity technology readers. And,
you have the option of assigning various security levels to
the cards depending on the credential holder. The iCLASS
Prox Card meets strict ISO thickness standards for use with
direct image and thermal transfer printers.
iCLASS® was specifically designed to make access control
more powerful, more versatile, and more secure. All radio
frequency data transmission between the card and reader
is encrypted using a secure algorithm. By using industry
standard encryption techniques, iCLASS reduces the risk of
compromised data or duplicated cards. For even
higher security, the card data may also be protected with
DES or triple DES encryption. Multiple securely separated
application areas are each protected by 64-bit diversified
read/write keys which allow complex applications and
provide for future expansion.
Additional Benefits
All 2k bit (256 Byte) iCLASS credentials have the following
features:
• Available in two application area configuration only.
• Provides the HID standard access control application area
and one other application area for user customization.
• Meets ISO 15693 standard for contactless
communications.
• Provides a cost effective way to improve the security of
your access control installation.
All 16k bit (2k Byte) and 32k bit (4k Byte) iCLASS
credentials have the following features:
• Sufficient read/write memory to store multiple biometric
templates.
• 16k available in a two or sixteen application area
configuration. 32k available with 16k memory configured
in either 2 or 16 application areas, plus an additional 16k
user configurable memory.
• Multiple securely separated files enable numerous
applications, including the HID standard access control
application, and support future growth.
• Meets ISO 15693 and 14443B for contactless
communications.
• Meets ISO 15693 and 14443B for contactless
communications.
Security mechanisms such as mutual authentication and
encryption are efficiently combined with fast processing
and data communication, resulting in transaction times of
less than 100 milliseconds for a typical secure e-purse
transaction.
06/12
CEM Catalogue
Chapter 1 Page 39
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:28 Page 40
Cards and Readers - HID iCLASS
Technical Specifications
Typical Maximum Read Range*
R10 2.0-3.0" (5.0-7.6cm)
R30/RW300 2.0-3.5" (5.0-8.9cm)
R40/RW400 2.5-4.5" (6.3-11.4cm)
RK40/RWK400 3.0-4.0” (7.6-10.1 cm)
*Dependent upon installation conditions.
Dimensions
5.40 x 8.57 x 0.084 cm
Weight
6.8 g
Card Construction
Thin, flexible polyvinyl chloride (PVC) laminate.
Operating Temperature
-40° to 70° C)
Operating Humidity
5-95% non-condensing
Operating Frequency
13.56 MHz
125 kHz
RF Interface
As suggested by ISO/IEC:
14443B read/write (16k only)
15693 read/write
Transaction Time
<100 ms typical
Baud Rate
14443 B mode - 106 kbps
15693 mode - 26 kbps
Memory Type
EEPROM, read/write
Multi-application Memory
2k bit (256 Byte) card – 2 application areas
16k bit (2k Byte) – 2 or 16 application areas
32k bit (4k Byte) card – 16k bit in 2 or 16 application areas
plus 16k
bit user configurable.
Write Endurance
Min. 100,000 cycles
Data Retention
10 years
This multi technology card allows easy changeover from 125kHz to 13.56M Hz Smart Cards on a site. This format can be
the same or different in the technologies.
Due to the numerous options for open & tarcked formats to be applied to either the low or high rgequency technology in
this card, we have not stock coded these items.
An HID card order form must be supplied with your NSL (Non Stock Listed) order directly stating the format and site
code/ID range etc..
Chapter 1 Page 40
CEM Catalogue
06/12
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:28 Page 41
Cards and Readers - HID iCLASS
Features
• Format Portability - Upgrading is completely transparent
since the same Prox format and user identification
numbers are brought across to your iCLASS credentials,
including HID Corporate 1000 formats. Also, Elite custom
key program is available for a higher level of security.
• Secure - All RF data transmission between the card and
reader is encrypted using a secure algorithm. By using
industry-standard encryption techniques and advanced
key management systems, iCLASS reduces the risk of
compromised data or duplicated cards.
• Interoperability - iCLASS is based on ISO interoperability
standards providing compatibility with many popular
card technologies (ISO 15693, ISO 14443A and ISO
14443B).
• Optimal Read Range Performance - An auto-tuning
feature automatically adjusts the reader for optimal read
range performance on any mounting surface.
iCLASS Readers
iCLASS readers are user-friendly, delivering the same
convenience and reliability of HID's world-renowned Prox
technology, with state-of-the-art features, driven by evolving
industry requirements.
Upgrading from Prox to iCLASS technology has never been
so simple. All iCLASS readers provide the same wiring
connections, low-current consumption and 5 to 16 volt
operation as our Prox readers. Additionally, you can
transfer your Prox format and user identification numbers to
iCLASS credentials, making the change completely
transparent to your access control system.
Additional Benefits
Security
64-bit authentication keys are extremely secure. Readers
and cards require matching keys to function. All RF data
transmission between the card and reader is encrypted
using a secure algorithm. The key management system
reduces the risk of compromised data or
duplicated cards.
Elite Custom Keys
Custom keys provide the highest level of security, where
cards and readers are uniquely matched to individual sites
or customers, and are non-interchangeable. Combining
Elite custom keys with our Corporate 1000 can offer
companies a scalable solution that can be implemented in
facilities worldwide.
Audiovisual Indication
Audio sounder provides various tone sequences to signify
access granted, access denied, power up and diagnostics.
Visually impaired cardholders can easily distinguish
between access granted and access denied. A highintensity light bar provides a clear visual status indication in
red, green or amber, even in bright sunlight.
Note: Light bar will illuminate amber when a FIPS 201/PIV
card is read.
Easily Interfaced
The reader's Wiegand output easily interfaces with most
existing Wiegand and Clock-and-Data protocol access
control panels. The reader reads standard proximity format
data from HID iCLASS® cards and will output data as
encoded. When reading ISO 14443A cards (MIFARE®/
DESFire®), the reader can be configured to output 26-bit,
32-bit (MSB), 32-bit (LSB), 34-bit, 40-bit or 56-bit Wiegand
formats based on the CSN (card serial number).
06/12
CEM Catalogue
Chapter 1 Page 41
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:28 Page 42
Cards and Readers - HID iCLASS
Indoor/Outdoor Design
Rugged, weatherised polycarbonate enclosure, designed to
withstand harsh environments, provides reliable
performance and is suitable for both internal and external
applications
R40
R10
6100C
6120C
iCLASS Card : Up to 3.25" (8.9 cm)
iCLASS Card : Up to 4.75" (12.1 cm)
iCLASS Key/Tag : Up to 1.5" (3.8 cm)
iCLASS Key/Tag : Up to 2.0" (5.1 cm)
MIFARE / DESFire Card
MIFARE / DESFire Card (CSN)
(CSN) : Up to 2.0" (5.1 cm)
Up to 2.5" (6.4 cm)
Mounting
The R10 are physically the smallest
The R40 is designed to mount and cover
readers and are ideally suited for
single gang switch boxes primarily used in the
mullion-mounted door installations,
United States and includes a slotted mounting
U.S. single-gang J-box or any flat surface
plate for European and Asian back box spacing.
(Reader will not cover junction box).
Dimensions
4.8 cm x 10.3 cm x 2.3 cm
8.4 cm x 12.2 cm x 2.4 cm
Power Supply
5-16 VDC, Linear supply recommended
Current Requirements 55mA AVG, 116mA PEAK
55mA AVG, 121mA PEAK
Operating Temperature
-35º to 65º C
Operating Humidity
5% to 95% relative humidity non-condensing
Transmit Frequency
13.56 MHz
Cable Distance
Wiegand Interface 500ft (150m) 22 AWG
Card Compatibility
· 15693 - read only; 2k bit (256 Byte), 16k bit (2k Byte), 32k bit (4k Byte) iCLASS credentials,
serial number
· 14443B - read only; 2k bit (256 Byte), 16k bit (2k Byte), 32k bit (4k Byte) iCLASS credentials
serial number
· 14443A - read only; MIFARE® and DESFire (serial number)
· US Government PIV
· FeliCa IDm (Transit Readers Only)
· CEPAS CAN/CSN (Transit Readers Only)
Environmental
IP55
Certifications
UL294/cUL (US), FCC Certification (US), IC (Canada), CE (EU), C-tick (Australia, New Zealand),
SRRC (China), MIC (Korea), NCC (Taiwan), iDA (Singapore), RoHS
Housing Material
UL94 Polycarbonate
Warranty
Warrantied against defects in materials and workmanship for life. (See HID
complete warranty policy for details - www.hidglobal.com.)
* Model Numbers
** Read Range
Product Codes
ADT branded readers
6100CKN0000ADT1
6120CKN0000ADT1
6130CKN0000ADT1
Unbranded readers
6100CKN0000
6100CKT0000
6120CKN0000
6120CKT0000
6130CKN000000
6130CKT000000
Chapter 1 Page 42
ADT branded HID R10 iCLASS reader with 45.7cm pigtail
ADT branded HID iCLASS R30 READER - 32 BIT with 45.7cm pigtail
ADT branded HID RK40 iCLASS red + PIN with 45.7cm pigtail
iCLASS R10 contactless smart card reader - mullion mounted - black. Supplied with 18" (0.5m)
pigtail. Provides a Wiegand output to the access control system.
iCLASS R10 contactless smart card reader - mullion mounted - black. Supplied with terminal
block. Provides a Wiegand output to the access control system.
iCLASS R40 contactless smart card reader - EU back Box mount - black. Supplied with 18"
(0.5m) pigtail. Provides a Wiegand output to the access control system.
iCLASS R40 contactless smart card reader - EU Back Box mount - black. Supplied with terminal
block. Provides a Wiegand output to the access control system.
iCLASS RK40 contactless smart card reader with keypad - EU back Box mount - black.
Supplied with 18" (0.5m) pigtail. Provides a Wiegand output for card and Wiegand bust for
keypad to the access control system.
iCLASS RK40 contactless smart card reader with keypad - EU Back Box mount - black.
Supplied with terminal block. Provides a Wiegand output for card and Wiegand bust for keypad
to the access control system.
CEM Catalogue
06/12
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:28 Page 43
Cards and Readers - HID iCLASS
Features
• Simple Migration from the most popular proximity
technologies to iCLASS®
• Open Architecture Design allows project specific formats
and keys
• Provides flexible options for processing multi-technology
cards and configuring the reader's audio/visual
characteristics
• All HID card formats carryover
• Reads: 125 kHz - HID, (Indala - special order) or AWID
proximity, 13.56 MHz - iCLASS, DESFire® - ISO 15693
CSN (MyD, I Code, Tag It), ISO 14443A CSN (MIFARE®)
iCLASS RP15
The RP15 is a multi-technology card reader designed for
customers upgrading their current card system from some
of the most popular proximity formats to iCLASS®
credentials. With the RP15 reader, the customer has the
ability to transition to smart cards over time while
incorporating the use of multiple card technologies within a
single building or across multiple facilities.
The RP15 multiCLASS reader is specifically designed to
assist customers with the transition from the popular HID
MiniProx® and other mullion mounted reader form factors.
The RP15 features the same mounting dimensions as the
MiniProx to allow for an easy direct replacement.
Only the multiCLASS family of products provides true
iCLASS security, the ease of Prox, the power of smart cards
and the confidence of choosing HID, the worldwide leader
in access control.
13.56 MHz contactless smart cards
• ISO 15693 - read only; 2k bit (256 Byte), 16k bit (2k Byte)
and 32k bit (4k Byte); serial number
• ISO 14443A - read only; MIFARE (serial number)
• ISO 14443B - read only; 2k bit (256 Byte) and 16k bit (2k
Byte)
• Sony FeliCa™ IDm (requires Transit p/n 6144)
• CEPAS CAN or CSN (requires Transit p/n 6144)
Technical Specifications
Product Code
Typical Read Range
iCLASS Card
7.5 - 9.0 cm
iCLASS Key/Tag
2.5 - 4.0 cm
HID Prox ISO Card
6.5 - 9.0 cm
HID Prox Clamshell Card
9.0 - 10.0 cm
HID Prox Keyfob/Tag
3.2 - 4.5 cm
Indala Proximity ISO Card
4.0 - 5.0 cm
Indala Proximity Clamshell Card
4.5 - 5.5 cm
Indala Proximity Keyfob/Tag
2.5 - 3.2 cm
6145CGN000
HID multiCLASS mullion reader - grey
cover. Supplied with 18" pigtail. This reader
will provide a Wiegand output from HID
125kHz prox and iCLASS credentials.
Dimensions
15.6 cm x 4.8 cm x 2.3 cm
Card Compatibility
125 kHz Proximity
• HID or Indala proximity cards, key fobs, and tags.
• AWID Credentials
06/12
CEM Catalogue
Chapter 1 Page 43
CEM CAT New 2011:19AugKANTECH.qxd 13/06/2012 11:28 Page 44
Cards and Readers - CEM
Features
• Utilises existing Ethernet connectivity – reduced cabling
• Internal database brings intelligence to the door –
ensuring 24/7 card validation
• Suitable for indoor or outdoor installation
• Keypad for added PIN security
EtherProx Reader
The EtherProx reader is the industry’s smallest Ethernet
card reader with integrated keypad, LCD display and
internal database giving off-line validation and intelligent
decision-making at the point of entry, even when host
communications are not available. The reader also stores
transaction details to be transferred to the host computer
when communications are restored.
Available in both traditional 125 kHz Proximity (EPO200)
and MiFare smart card (EPO210) options, the EtherProx
communicates directly with the central server via Ethernet
removing the need for a door control panel in the system
design.
Product Codes
SPASS-EPO-200-B
EtherProx Reader (125 kHz Proximity)
EMEA
SPASS-EPO-210-B
EtherProx Reader (Mifare CSN) EMEA)
Features
• Internal database ensures 24/7 Intelligence at the door
for continuous operations
• IP rated 65 - Suitable for indoor or out door use
• Keypad for added PIN security, LCD display to show
meaningful card outcomes such as ‘Wrong Time Zone’
InfoProx Reader
The InfoProx offers all the same features available in the
EtherProx (such as LCD display and off line validation) but it
connects to the central server via RS485 and requires an
S9032 or S9064 controller in the system design.
Product Codes
SPASS-IPO-200-B
SPASS-IPO-210-B
InfoProx Reader (125 kHz
Proximity) EMEA
InfoProx Reader (Mifare CSN)
EMEA
InfoProx Exit Reader
The InfoProx Exit is designed for any area where exit door
control is required in addition to entry control. InfoProx Exit
readers can be used in conjunction with the InfoProx and
EtherProx card readers for exit access..
Product Codes
SPASS-IPX-200-B
InfoProx Exit (125 kHz Proximity) EMEA
SPASS-IPX-210-B
InfoProx Exit (Mifare CSN) EMEA
Chapter 1 Page 44
CEM Catalogue
06/12
New_CEM_Covers 3:Layout 1 06/03/2012 10:18 Page 16
For more information on CEM products please call: +44(0)2890 45 6767
Email [email protected] or contact your CEM account representative.
Please visit us at www.cemsys.com
UK Distribution Centre
(Warehousing/Distribution/Purchasing)
Dunhams Lane
Letchworth
Hertfordshire
SG6 1BE
United Kingdom
Tel: +44 (0) 1462 667 700
Fax: +44 (0) 1462 667 777
E-mail: [email protected]
For more detailed product information, please visit us at www.tycoemea.com
Head Office: ADT Fire and Security plc, Security House, The Summit, Hanworth Road, Sunbury-on-Thames,
Middlesex TW16 5DB.
ADT and the ADT logo are registered trademarks of ADT Services AG and are used under license.
ADT reserves the right to modify or withdraw any product or service without notice.
World leader in fire and security solutions
PMC0016B Is. 1.2 06.12
© 2012 Tyco International
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement