CAUTION
WARNING
CLASS 1 LASER PRODUCT
CAUTION
INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCKS
DEFEATED.
AVOID EXPOSURE TO BEAM
CLASS 1 LASER PRODUCT
APPAREIL Á LASER DE CLASSE 1
PRODUCTO LASER DE CLASE 1
This product contains a low power laser device.
Warning: Do not touch the lens.
DO NOT THROW BATTERIES IN FIRE !
PRECAUTIONS
Follow the advice below for safe and appropriate operations.
ON PLACEMENT
•
Do not use the unit in places which are extremely hot, cold, dusty, or humid.
•
Place the unit on a flat and even surface.
•
Do not restrict the air flow of the unit by placing it in a place with poor air flow, by covering it with a cloth, or by placing it on a carpet.
ON SAFETY
•
When connecting and disconnecting the AC cord, grip the plug and not the cord itself. Pulling the cord may damage it and create hazard.
•
When you are not going to use the unit for a long period of time, disconnect the AC power cord.
ON AC VOLTAGE
•
Before use, check that the rated voltage of your unit matches your local voltage.
ON CONDENSATION
•
When left in a heated room where it is warm and damp, water droplets or condensation may form inside the
CD player.
•
When there is condensation inside the unit, the unit may not function normally.
•
Let it stand for 1 to 2 hours before turning the power on, or gradually heat the room up and dry the unit before use.
*
Ensure a minimum distance of 5 cm around the apparatus for sufficient ventilation.
*
Ensure that the ventilation is not impeded by covering the ventilation openings with items,
such as newspapers, table-cloths, curtains, etc..
*
Do not place naked flame sources, such as lighted candles on the apparatus.
*
Take attention to the environmental aspects of battery disposal.
*
Use the apparatus only in moderate climates (not in tropical climates).
*
Do not expose the apparatus to dripping or splashing.
*
Do not place objects filled with liquids, such as vases, on the apparatus.
Should any trouble occur, disconnect the AC power cord and refer servicing to qualified personnel.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightening flash
with arrowhead symbol
within the triangle is a
warning sign alerting
the user of "dangerous
voltage" inside the unit.
ATTENTION : To reduce the risk
of electric shock, do not remove the
cover. There are no user serviceable
parts inside the unit. Refer all servicing
to qualified personnel.
The exclamation point within
the triangle is a warning sign
alerting the user of important
instructions accompanying
the product.
In case of misfunction due to electrostatic discharge the apparatus has to be reset by disconnecting it from mains supply.
THE MARKING PLATE IS LOCATED AT THE BACK OF ENCLOSURE OF THE APPARATUS.
LOCATION OF CONTROLS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
VOLUME CONTROL
FUNCTION SWITCH
CARRYING HANDLE
CASSETTE PAUSE
CASSETTE STOP/EJECT
CASSETTE F.FWD
CD OPEN BUTTON
CD DOOR
CASSETTE REWIND
CASSETTE PLAY
FM STEREO INDICATOR
DIAL SCALE
BAND SWITCH
CD DISPLAY
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
GB 1
TUNING CONTROL
SPEAKER
CD PLAY / PAUSE BUTTON
CD STOP BUTTON
CASSETTE DOOR
CD NEXT BUTTON
CD PROG/CLOCK-ADJ/
PLAY MODE BUTTON
POWER BUTTON
CD BACK BUTTON
PHONES JACK
TELESCOPIC ANTENNA
BATTERY COMPARTMENT
AC SOCKET
POWER SUPPLY
USING HOUSE CURRENT
Before use, check that the rated voltage
of your unit matches your local voltage.
Note: Plug is used as the disconnect device.
The disconnect device shall remain readily
operable.
To AC socket
To AC outlet
USING BATTERIES
Disconnect the AC power cord from the AC inlet of the
unit. Battery power is cut automatically by the cord while
it is connected.
When the volume decrease, or the sound distorts, replace
all of the batteries with new ones.
battery door
Insert eight UM-2 ( size C ) batteries.
TURN ON / OFF THE SYSTEM
Press the POWER button to turn the audio on.
To change the audio mode between CD, RADIO AND TAPE ,
set the FUNCTION switch while the power is on.
The audio mode is displayed.
Turn off the unit by pressing the POWER button.
" OFF " word will be shown on the display and then resume
the current time.
LCD display
CLOCK ADJUSTMENT
The clock is displayed �������������������������������
on LCD display at standby mode.
1. Press and hold the PROG / CLOCK-ADJ./PLAY MODE button,
2. Press the
NEXT or
BACK to select 12 hours or 24 hours display.
3. Press the PROG / CLOCK-ADJ./PLAY MODE button,
���������������������
the hour digit flash.
4. Press the NEXT or BACK to adjust hour digit.
5. Press the PROG / CLOCK-ADJ./PLAY MODE button,
the minute digit flash.
LCD display
6. Press the NEXT or BACK to adjust minute digit.
7. Press the PROG / CLOCK-ADJ./PLAY MODE button again,
the correct time is shown on display.
POWER
CLOCK-ADJ.
ADJUSTING THE SOUND
TO ADJUST THE VOLUME
MIN.
VOLUME
MAX.
WHEN RECORDING
The VOLUME control may be adjusted with no effect on
the recorded signal.
FOR PRIVATE LISTENING
Plug in headphones (ø3.5 mm stereo mini-plug) to the
PHONES jack.
When headphones are plugged in, the speakers are
automatically disconnected.
GB 2
LISTENING TO THE RADIO
4 . Tune in to a station.
1 . Turn on the unit by
pressing the POWER button.
TUNING
POWER
2 . Set to RADIO
FUNCTION
RADIO
5 . Adjust the sound.
LCD display
3 . Select a BAND.
FM ST.
BAND
FM
MIN.
AM
MAX.
VOLUME
FOR BETTER RECEPTION
FM
NOTE : 1. FM stereo LED indicator lights if receive FM stereo broardcast and the BAND switch set on "FM STEREO".
2. When too much noise is heard during FM STEREO reception, set BAND switch to FM mono.
AFTER LISTENING
Turn off the unit by pressing the POWER button.
Unit will be automatically off after 4 hours without further operation.
COMPACT DISC PLAYBACK
1 . Turn on the unit by
pressing the POWER button.
POWER
2 . Set to CD
4. Insert a disc with the label side facing up.
5 . Close the disc holder.
The disc will rotate and the total tracks of the disc will
show on the display.
FUNCTION
CD
3 . Open the disc holder by pushing the CD door open button.
5. GB 3
Press the PLAY/PAUSE
button.
Track number "01" & the symbol "
" will be shown during normal compact disc playback.
CD display
TO STOP PLAYBACK
Press the STOP button and the display shows the total
tracks of the disc.
TO INTERRUPT PLAYBACK
Press the Play/Pause
button and the symbol
" " will be flashed. Press the button again to
resume playback.
CD display
TO SKIP TO THE BEGINNING OF A TRACK
•
Press either one of the skip buttons according to the desired skip direction.
•
Play/back resumes from the selected track.
•
When the button is pressed once during play, the previous track starts again.
•
When the button is pressed once during play, the next track plays.
SEARCHING FOR A PASSAGE WITHIN A TRACK
•
Keep the or button pressed during playback, and release the button as soon as you recognise the desired
passage. Then normal CD playback will resume from this point.
Unit will be automatically off after 30mins without any operation (in stop mode / CD door open).
REPEAT , REPEAT ALL AND MIX PLAYBACK
Press PLAY MODE button during CD playback. CD plays with a single track repeat,
all tracks repeat or randomly.
FOR NORMAL COMPACT DISC PLAYBACK
Mode sequence REPEAT >> REPEAT ALL >> MIX >> CLEAR.
During Repeat 1 mode,
display shows
During Mix mode,
display shows
During Repeat 2 mode,
display shows
CD display
CD display
PROGRAMMED PLAYBACK
PROGRAMMED PLAYBACK
7. Press the " PLAY/PAUSE " button to resume
Programmed playback enables tracks on a disc to be played
programmed playback.
in the desired order. Up to 20 tracks can be programmed.
8. Open the CD door, turn off the CD player or press 1. Press the " PROGRAM " button.
the " STOP " button twice to clear the programmed 2. Press the " NEXT " and " BACK " buttons to select the
memory.
desired track number.
Note : Programming can only be made when the player 3. Press the " PROGRAM " button again to memorize
is in stop mode.
the track.
4. Repeat steps 2 and 3 until all desired tracks are
programmed.
5. Press the " PLAY/PAUSE " button to start.
"
" , " PROG " & track number are shown on
" PROGRAM "
the CD display.
CD display
6. Press the " STOP " button once to stop programmed playback.
Note on CD-R/RW discs
- Because of non-standardized format definition/ production of CD-R/RW, playback quality and performance are not guaranteed.
- Manufacturer is not responsible for the playability of CD-R/RW due to recording conditions, such as PC performance, writing software, media ability, etc.
- Do not attach a seal or label to either side of the CD-R/RW disc. It may cause a malfunction.
- It is recommended to record only audio files on CD-R/RW discs for easy reading.
GB 4
TAPE PLAYBACK
1 . Set to TAPE
3 . Press the
PLAY button.
PLAY
FUNCTION
TAPE
2 . Insert the cassette.
TO STOP PLAYBACK
Press the STOP / EJECT button.
TO INTERRUPT PLAYBACK
Press the PAUSE button.
To resume play, press the PAUSE button again.
TO FAST WIND
Press the REWIND or F.FWD button. Press the STOP/
EJECT button to stop winding at the desired position.
MAINTENANCE
CLEANING CD
If the CD skips or will not play , the disc may need cleaning
. Before playing, wipe the disc from the centre out with a
cleaning cloth. After playing, store the disc in its case.
CLEANING THE UNIT
Do not use volatile chemicals on this unit. Clean by lightly
wiping with a soft cloth.
CLEANING THE CD LENS
If the CD lens is dusty, clean it with a brush-blower. Blow
several times on the lens and remove the dust with the
brush. Finger prints may be removed with a cotton swab
moistened with alcohol.
WARNING
Should the CD door be opened before the reading of the
CD completed, a jamming noise may occur. This is resolved
by closing the CD door.
IMPORTANT NOTE
If an abnormal display indication or an operating problem
occurs, disconnect the AC power cord and remove the
batteries. Wait at least 5 seconds, then reconnect the AC
power cord or reinstall the batteries.
GB 5
CASSETTE SECTION
Track format:
Tape speed:
F.F. & REW time:
Frequency response:
2 track stereo
4.75 cm / sec.
170 sec. (F-60 tapes)
125 Hz - 8000 Hz (Normal tape)
CD SECTION
Channels:
S / N ratio:
Wow & Flutter: Sampling frequency:
Quantization:
Pick up light source: Pick up wave length
2 channels
60 dB
undetectable
44.1 kHz 8 x over sampling
1 bit DA converter
Semi - conductor laser
790 nm
RADIO SECTION
Tuning ranges:
Antennas:
FM 88 - 108 MHz
AM 540 - 1600 kHz
AM Built - in ferrite bar
FM Rod antenna
GENERAL
Output power:
Power consumption:
Speaker: Phones jack:
Power source: Dimensions:
Weight
1.2 W + 1.2 W (RMS)
13 W
3" 8 OHM
3.5MM
AC : 230V ~ 50Hz
DC : 12V (8 x 1.5V LR14/ "C"/UM2 )
288(L) x 238(D) x 155(H)mm
2.2 KGS
Due to continuing improvement, the features and the design are subject to change without notice.
Where to place the item :
Today’s furniture is coated with a wide variety of lacquers and synthetic-coatings that are treated with an extensive range
of cleaning products. Therefore, the possibility that some of these substances contain components that react adversely to
the rubber feet of the item and soften them, cannot be completely excluded. The rubber feet of the appliance can cause
discoloring to furniture surfaces. If necessary, place the appliance on a non-slide surface. If at any time in the future you should need to dispose of this product please note that: Waste
electrical products should not be disposed of with household waste. Please recycle where
facilities exist. Check with your Local Authority or retailer for recycling advice. (Waste Electrical
and Electronic Equipment Directive)
GB 6
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement