null  null
4CH Digital Wireless Security System
Model: 8104JR/8105JR/8107JR
EU Environmental Protection
Waste electrical products should
not be disposed of with household
waste. Please recycle where
facilities exist. Check with your
local authority or retailer for
recycling advice.
Model: 8104JR/8105JR/8107JR
Version 1.0
Please read this user manual carefully before using this product.
Failure to understand operation procedures may result in injury.
CONTENTS
Welcome
Features
Packing List
Structure
Installation
Operations
●
Basic operations
●
Video recording
●
Playback
●
Delete Video
●
Video Output
System setting
●
Network
●
Date / time
●
Language
●
Record Mode
●
Format SD/USB
●
Storage for Recording
●
Display Items
●
TV System
●
System Information
●
System Update
●
Scan Mode Period
●
Mute
●
Load Default
●
Brightness
●
Volume
●
Alarm Volume
●
Power Saving Mode
Record
●
Timer Recording
●
Motion Detection
●
PIR Recording
Playback
Camera
●
Pairing
●
Activation
●
PIP Setting
Alarm setting
Operations for Android Client
Operations for iOS Apple Client
Specifications
Warnings
FAQ
FCC Information
Troubleshooting
* For 8105JR and 8107JR, the camera has IR-cut function
and image effect is better than 8104JR.
01
02
02
02
03
04
05
05
07
09
09
10
10
11
11
12
12
12
13
13
13
13
13
14
14
14
14
14
14
15
15
15
15
16
16
16
17
18
18
19
20
24
28
28
29
29
30
Welcome
This product is a household monitoring recording device. It consists
of four cameras installed at entrances/exits of the home and one
DVR receiver with a 7-inch LCD monitor. The four-split screen of
the receiver can display the monitoring pictures of four accessed
cameras. In addition, the infrared sensing alarm function of human
body is available. Thus, a household closed monitoring system is
presented.
Features
●
●
●
●
●
●
●
●
●
●
●
●
●
4CH digital wireless camera & DVR system;
Simple installation- no cables required;
Total digital wireless, no interferences, no privacy leak;
7” LCD monitor with integrated video recorder;
Support up to 32GB SD card or external mobile disk by USB2.0
(up to 1TBmobile disk);
Support 4cameras/24hours/7days non-stop overwrite recording;
Multiple recording modes: manual, schedule and motion activated;
20m night vision range (only for 8107JR);
Video quality: 4CH VGA 10fps, 1CH VGA 30fps;
Weather proof outdoor cameras with 300m/1000ft transmission
open range;
Video output function for bigger monitor;
IR-cut function (only for 8105JR and 8107JR);
Support the user of Android and iOS Apple client to view video;
! Please know that this monitor is not a PC, so some of the memory
devices may not work on this monitor.
Packing List
① Camera x (1~4)
② 7"TFT LCD Monitor x 1
③ Adapter for Monitor x 1
④ Adapter for Camera x (1~4)
⑤ Network Adapter x 1
⑥ AV Output Cable x 1
⑦ Wall plug x 4
⑧ Screws x 4
9
10
11
SD Card x 1
Bracket for Monitor x 1
Remote control x 1
8104/8105JR
8107JR
①
②
③
④
(optional)
⑤
⑥
⑦
⑧
9
10
11
* Only one camera included in the package.
* The pictures are for reference only, please refer to real subjects.
02
Installation
Structure
8104/8105JR
1. Install the camera at the proper monitoring location. The camera
can be installed in two modes:
8107JR
Antenna
The rain cover
8104/8105JR
8107JR
Infrared LEDs
Lens
PIR infrared sensor
Microphone
Bracket
Antenna Socket
Antenna Socket
Pair Button
Pair Button
Power Indicator
Link Indicator
Power Indicator
Link Indicator
Power Input
Power Input
Speaker
① Upright installation:
Install the camera
on a level plane.
Upright installation:
Install the camera
on a level plane.
2. Install the receiver at a proper location. This receiver is provided
with two kinds of brackets, so it can be installed in two modes:
USB Port
SD Card Slot
Network port
AV Output
Power Port
Bracket
② Reverse installation:
Install the camera in
the celilng.
Antenna
Use screws to
fix the bracket
to the wall.
7"TFT-LCD
Link Indicator
Power Indicator
Record/stop Video
Quarter Display Button
Delete file/LCD、TV Switch
Menu
Display Mode
Playback Video
Power on/off
① Positioned on a level plane
Clamp the
receiver on
the bracket
② Mounted to the wall
3. Insert the SD card or connect an external storage device, such
as a mobile hard disk.
OK Button
Navigate Button
Optional
Power on/off
Navigate Button
OK Button
Record/stop Video
Quarter Display Button
Delete file/LCD、TV Switch
03
Playback Video
Display Mode
Menu
Remarks:
1. It doesn’t support hot plugging of SD card or external storage
device.
2. The external mobile disk/SD card should be in format of Fat32.
3. Please format the SD card or external mobile disk if they have
been used on other device.
04
5 . After successful pairing, the following real-time monitoring
picture appears:
Operations
●
Basic operations
V
1. Connect the camera to the power supply. The power Indicator
on the back is turned on:
Picture display area
2011/11/05/09:30
Picture display area
Time stamp
6. Press the
8104/8105JR
2011/11/05/09:30
Picture display area
2011/11/05/09:30
Picture display area
2011/11/05/09:30
button to switch between four display modes:
8107JR
2. Connect the receiver to the power supply.
V
V
Picture display area
2011/11/05/09:30
Picture display area
2011/11/05/09:30
Picture display area
Picture display area
2011/11/05/09:30
Picture display area
2011/11/05/09:30
2011/11/05/09:30
Four pictures
One picture
C2
V
C2
V
Picture display area
Picture display area
2011/11/05/09:30
2011/11/05/09:30
C3
Picture display area
C3
Picture display area
Picture display area
Picture display area
3. Press the power switch
on the receiver for 2s. or press
the power switch
on the remote control (direct the remote
control toward the receiver).
The power indicator is turned on and the power-on picture
appears.
2011/11/05/09:30
2011/11/05/09:30
C4
C4
Picture display area
2011/11/05/09:30
Picture display area
2011/11/05/09:30
2011/11/05/09:30
One large picture and
three small pictures
2011/11/05/09:30
One large picture and
three small pictures
7. Press the
button to enter cyclic mode display. Five cyclic
intervals are available: 5s, 10s, 15s, 20s, and 30s and can
be set under “System”.
Meanings of icons on the real-time monitoring picture:
4. Pair the cameras and receiver respectively (at most four cameras
can be connected at the same time). Pairing is completed by
default before delivery. If pairing is not completed, complete
pairing according to “Pairing” on page 17.
05
Mobile hard disk inserted
successfully
Current camera
SD card inserted successfully
Recording status
UPnP
No open router
UPnP
Network connection failure
UPnP
Network connection successful
Signal intensity
C2
C3 C4
Camera name
Mute
06
●
Video recording
◆◆ Manual
Recording:
1. In the real-time monitoring status, press the or buttons
to select the camera for video recording as the current camera.
2. Press the recording/stopping
button on the device.
The recording icon
is displayed on the screen, indicating that
recording starts.
3. Press the
button on the device again to stop recording.
◆◆ Timer
Recording:
* When “Off” is set, object motion detection function is turned off.
Set the recording start/stop time through the “Timer Recording”
menu. The device automatically records according to the set
start/stop time. After recording, it automatically saves the video.
Specific steps are as follows:
1. Press the MENU button to enter setting interface;
2. Press the or button to select “Record” and press the OK
button to enter;
3. Press the or button to select “Timer Recording” and press
the OK button to enter;
4. Press the or button to select “New Schedule” and press the
OK button to enter:
Timer Recording
Camera
All Cameras
Date
11/6/2012
Tue
Start Time
00
:
00
End Time
00
:
00
OK:Options
MENU:Quit
Press the or button to select;
Press the or button to adjust;
Press the OK button to confirm and exit;
5. After setting, the device automatically records according to the
set start/stop time.
07
◆◆ Motion Detection Recording:
If there is object motion detected by any accessed camera, recording
can be triggered. The specific steps are as follows:
1. Press the MENU button to enter the setting interface;
2. Press the or button to select “Record”, press the OK button
to enter;
3. Press the or button to select “Motion Detection”, press the
OK button to enter;
4. Press the or button to select camera;
5. Press the OK button to enter;
6. Press the or button to select item;
7. Press the or button to adjust;
8. Press the OK button to confirm and exit.
◆◆ PIR Recording:
If there is human motion detected by any accessed camera, recording
can be triggered. The specific steps are as follows:
1. Press the MENU button to enter the setting interface;
2. Press the or button to select “Record”, press the OK button
to enter;
3. Press the or button to select “PIR Recording”, press the OK
button to enter;
4. Press the or button to select the camera;
5. Press the or button to select “On”;
6. Press the OK button to confirm and exit.
* When “Off” is set, human motion detection function is turned off.
* The infrared sensing distance of PIR is 5m. If the distance exceeds
5m, sensing may fail.
Remarks:
1. If the video recording time is longer than 5 minutes, a video file
will be automatically saved every 5 minutes.
2. Multiple channels (four channels at most) recording at the
same time is supported. The recorded videos of each channel
are saved in an independent video folder.
08
●
Playback
●
1. In the real-time status, press the
button to enter playback
interface;
2. Press the or button to select the folder;
3. Press the OK button confirm and enter:
/mnt/usb/rec/20131107
.. (up)
2/5
<DIR>
C1_00-05
<DIR>
C2_06-11
<DIR>
C2_00-05
<DIR>
C3_06-11
<DIR>
C4_00-05
<DIR>
'OK':Play
Video Output
You can connect the receiver to a larger monitor/TV to monitor
video more clearly.
Video Cable
Press the
button to switch display between the monitor/TV and
the receiver.
'Del':Delete
4. Press the or button to select video;
5. Press the OK button to playback:
C2
Picture display area
System Setting
In the real - time status, press the MENU button
following interface:
to enter the
V
2011/11/05/09:30
C3
Picture display area
Picture display area
2011/11/05/09:30
C4
Picture display area
2011/11/05/09:30
2011/11/05/09:30
Press the
/
button to go
backward/forward fast;
press the OK button again
to pause; press the MENU
button to quit the play mode.
●
Press the or button to select “System” and then press the OK
button to enter the system setting interface:
System
Delete Video
Network
1. In the video playback mode, press the
or
buttons to select
the video or video folder to be deleted.
2. Press the
button on the device to delete it.
Remark:
Only the empty folder can be deleted.
09
Date / Time
Language
Record Mode
OK:Options
MENU:Quit
10
Network
Sets and views the network information.
Date / Time
Sets the system time and date.
Language
Format SD/USB
Sets the system language.
Sets to stop recording or overwrite the earliest video record when the
storage medium is full.
Sets whether to format the storage medium.
Storage for Recording
Selects the storage medium.
Display Items
Sets whether to display RSSI, SD/USB Status and Camera on the screen
and the recorded video.
Selects a system.
Record Mode
TV System
System Information
Views the system information.
System Update
For software upgrade.
Scan Mode Period
Sets the cyclic display interval of monitoring picture on the camera.
Mute
Turns on/off the speaker on the receiver.
Load Default
Sets whether to restore default settings.
Brightness
Adjusts brightness of the LCD screen.
Volume
Adjusts the sound.
Alarm Volume
Adjusts the alarm volume.
Power Saving Mode
Adjusts power saving mode.
Language
1. Press the OK button to enter;
2. Press the or button to select language and then press the
OK button to confirm and exit.
●
Press the or buttons to select an option, and then press
the OK button to confirm.
●
●
Record Mode
1. Press the OK button to enter;
2. Press the
or
button to select “Normal” or “Overwrite” and
then press the OK buton to confirm and exit.
Remarks:
Normal: When the SD card or the mobile hard disk is full, the
system stops recording automatically.
Overwrite: When the SD card or the mobile hard disk is full, the
system automatically deletes the earliest videos and
reserves a sufficient storage space to guarantee this
recording.
Network
1. Press OK button to enter and view;
2. Press the MENU button to exit.
Network
●
Press the or button to select;
Press the OK button to confirm;
Modify the network parameters;
Press the OK button to save and
confirm;
Press the MENU button to exit.
Network Password
Network Addressing
Push Notification
Network Information
OK:Options
MENU:Quit
Format SD/USB
1. Press the OK button to enter;
2. Press the or button to select “Cancel”, “SD Card” or “USB Device”;
Cancel: Cancels formatting.
SD Card: Formats the SD card.
USB Device: Formats the USB device.
3. Press the OK button to format:
Format SD/USB
Date / time
Press the OK button to enter:
●
Formatting
Date / Time
, please
wait
.....
Date
/
2013
11
/
15
Time
20
OK:Options
11
:
11
MENU:Quit
Press the or button to select;
Press the or button to adjust;
Press the OK button to confirm;
Press the MENU button to exit.
OK:Options
MENU:Quit
4. After formatting, the system prompts “Format Successfully”,
indicating that formatting succeeds.
12
●
Storage for Recording
1. Press the OK button to enter;
2. Press the
or
button to select “SD Card” or “USB Device”;
3. Press the OK button to confirm and exit.
●
Scan Mode Period
1. Press the OK button to enter;
2. Press the
or
button to select;
3. Press OK button again to confirm and exit.
●
Display Items
●
1. Press the OK button to enter;
2. Press the
or
button to select;
3. Click the OK button to confirm whether to display this item.
If this item is displayed, the
icon appears behind this item.
RSSI: Signal intensity icon, icon
;
SD/USB status: Whether the SD card or mobile hard disk is
inserted, icons
;
C 2 C3 C4 ;
Camera: Camera name, icons
Network: Network connection, icons UPnP UPnP UPnP ;
4. After setting, press the MENU button to confirm and exit.
●
TV System
1. Press the OK button to enter;
2. Press the
or button to select;
Mute
1. Press the OK button to enter;
2. Press the
or
button to select “On” or “Off”;
3. Press the OK button again to confirm and exit.
●
Load Default
1. Press the OK button to enter;
2. Press the
or
button to select “Cancel” or “OK”;
Cancel: Cancels restoration of default settings.
OK: Restores default settings.
3. Press the OK button to confirm and exit.
●
Brightness
3. Press OK button to confirm and exit.
●
System Information
1. Press OK button to enter and view;
2. Press the MENU button to exit.
●
1. Press the OK button to enter;
2. Press the
or
button to select;
3. Press OK button again to adjust;
button to implement it;
5. Press OK to confirm or the MENU to exit.
13
●
Volume
1. Press the OK button to enter;
2. Press the
or
button to adjust;
3. Press the OK button to confirm and exit.
System Update
4. Press
1. Press the OK button to enter;
2. Press the
or
button to adjust;
3. Press the OK button to confirm and exit.
●
Alarm Volume
1. Press the OK button to enter;
2. Press the
or
button to adjust;
3. Press the OK button to confirm and exit.
14
●
Power Saving Mode
●
1. Press the OK button to enter;
2. Press the
or button to select “Time Interval” or “Wake up
on Motion”
3. Press the OK button to enter;
4. Press the
or
button to select;
PIR Recording
If there is human motion detected by any accessed camera,
recording can be triggered. For specific steps, see Page 08.
Remark: When there is alarm sound, you can press the Delete
button on the panel to mute it.
5. Press the OK button to confirm and exit.
Record
1. In the real-time status, press the MENU button to enter the
following interface:
2. Press the or
button to select “Record”;
3. Press the OK button to enter:
Record
Playback
For specific steps, see Page 09.
Timer Recording
Motion Detection
PIR Recording
OK:Options
MENU:Quit
Camera
●
Timer Recording
Set the recording start/stop time. The device automatically records
according to the set start/stop time. After recording, it automatically
saves the video record. For specific steps, see Page 07.
1. In the real-time status, press the MENU button to enter the
following interface:
2. Press the
or
button to select “Camera”;
3. Press the OK button to enter:
Camera
●
Motion Detection
Pairing
Activation
If there is object motion detected by any accessed camera,
recording can be triggered. For specific steps, see Page 08.
Remark: When there is alarm sound, you can press the Delete
button on the panel to mute it.
15
PIP Setting
OK:Options
MENU:Quit
16
●
Pairing
After pairing, the camera is not affected by interference of other
frequencies.
1. Press the or button to select “Pairing”, press the OK button
to enter:
Camera 1
Paired
0xe01f0008
Camera 2
Paired
0xe01f0007
Camera 3
Paired
0xe01f0006
Paired
0xe01f0005
OK:Options
●
Activation
1. Press the
or
button to select “Activation”, press the OK
button to enter:
Pairing
Camera -4
Remarks:
If pairing fails, the system prompts “Pairing failed”. Please
perform pairing again.
Activation
Camera -4
MENU:Quit
Camera 1
Off
Camera 2
On
Paired
Camera 3
On
Paired
On
Paired
OK:Options
2. Press the
or
button to select camera;
3. Press the OK button to pair:
Pairing
Camera -4
Camera 1
Paired
Camera 2
Paired
Pairing
.....
0xe01f0008
0xe01f0007
Long press the PAIR button on TX for 2 seconds
Paired
0xe01f0006
52
MENU:Quit
2. Press the
or
button to select the camera;
3. Press the
or
button to select “On” or “Off”;
4. Press the OK button to confirm and exit.
Notice: When “OFF” is set, the camera does not have any action,
such as monitoring picture display, recording, or automatic alarm.
Camera 3
Paired
OK:Options
0xe01f0005
MENU:Quit
●
4. Within 60s, press the Pairing button on the back of the camera
for 2s.
PIP Setting
Set the resolution and pixels for the recorded video.
1. Press the
or
button to select “PIP Setting”, press the OK
button to enter:
PIP Setting
8104/8105JR
8107JR
5. After successful pairing, the receiver screen displays the following
information:
Camera-1
Low
High
Camera-2
High
High
Camera-3
High
High
Camera-4
High
High
OK:Options
MENU:Quit
Pairing OK
Congratulations!!!
17
2. Press the
or
button to select the camera;
3. Press the OK button to enter the following interface:
18
Operations for Android Client
PIP Setting
Resolution Size
Quality
High
Top
Low
High
●
Medium
Low
OK:Options
Connect network
1. Connect the network adapter to the receiver. Then connect
the outer net.
MENU:Quit
Press the
or
button to select “Resolution Size” or “Quality”;
Press the
or
button to select “Top”, “High”, “Medium” or “Low”;
Press the OK button to adjust;
Press the MENU button to confirm and exit.
Alarm Setting
2. If connection is successful, enter Main Menu=>System=>Network
=>Network Information, the receiver screen displays the following:
Here, you can set whether to send an alarm automatically when
any motion detected by the camera:
1. In the real-time status, press the “MENU” button to enter setting
2.
3.
4.
5.
6.
7.
interface;
Press the
or
button to select “Alarm”;
Press the OK button to enter;
Press the
or
button to select “Motion Detection” or “PIR
Detection”;
Press the OK button to enter;
Press the
or
button to select “Off” or “On”;
Press OK button to confirm and exit.
Remark:
Only when the PIR or motion recording function be opened,
alarm is effective.
5003
Network ready!
●
Download the client program
1. Turn on the intelligent mobile device terminal and enter “GOOGLE
PLAY” store, then search and download “GoStreaming”software.
2. Install the software, as the following interface:
Google play
19
GoStreaming
20
●
View image
1. Click the Settings and enter settings interface. add new camera.
3. Click the
icon, the image will display on the smart phone.
2. When RX and mobile phone can normally connect to outer net.
you just need to input Device ID to the client. or scan the QR code
to get the Device ID. the password is set up in the receiver, and
then input to the mobile phone. and saving.
4. Press and hold the device ID to enter the setting interface.
Network ready!
Or scan
Input
Network
Set password
and input
Network Password
Network Addressing
Push Notification
Network Information
OK:Options
21
MENU:Quit
22
●
Setting Push Notification
Operations for iOS Apple Client
1. Turn on the push notification function on the receiver, enter
Main Menu => System => Network => Push Notification, the
receiver screen displays the following:
Push Notification
●
Connect network
1. Connect the network adapter to the receiver. Then connect
the outer net.
Record
Turn on/off
Timer recording
Minimum Push interval
Motion Detection
Time Period
PIR Recording
Registered Mobiles
OK:Options
MENU:Quit
Users can set according to the situation
of Minimum Push interval and time period
OK:Options
MENU:Quit
Notice: Only when the motion detection and
PIR recording are opened at the same time,
push notification function will be effective.
2. If connection is successful, enter Main Menu=>System=>Network
=>Network Information, the receiver screen displays the following:
2. Click "Notification push setting" to register an account. When there is a
movement in front of the camera, it will send a push message to
your smart phone. As below shown:
Registered Mobiles
555
OK:Options
Network ready!
MENU:Quit
After successful registration,
the monitor will receive the
registered account name.
Remarks:
1. Only when the receiver in the real-time state, to view the image.
●
Download the client program
1. Turn on the intelligent mobile device terminal and enter
“App Store”,then search and download “GoCam4CH”
software. as the following interface:
2. Install the software, as the following interface:
2. If the Device ID was unable to get to the RX, indicates that RX
did not normally connect outer net, need to check your network.
3. If everything is normal, but still not in the mobile phone client
to view images, please close the client software running always
in the background, please try it again.
App Store
GoCam4CH
4. The network adapter does not support hot plug, Before open
the RX, The network is connected with the RX.
23
24
●
View image
3. To view the video image, you need to choose the right title in
the Device list, then click the line to enter the monitoring mode.
1. Click the APP and enter “Device list” interface.
Click the
icon to add new camera.
2. When RX and mobile phone can normally connect to outer net.
you just need to input Device ID to the client. or scan the QR code
to get the Device ID. the password is set up in the receiver, and
then input to the mobile phone. and saving.
Network
Set password and input
Network Password
Network Addressing
4. Click on the bottom
icon. APP will try to connect the RX
of the previous selected title, if connection is successful, the
video image will display on the client.
Push Notification
Network Information
OK:Options
MENU:Quit
Input
Or scan
Network ready!
2013/11/15/16:43
Take a photo
25
26
●
Setting Push Notification
Specifications
1. Turn on the push notification function on the receiver, enter
Main Menu => System => Network => Push Notification, the
receiver screen displays the following:
Items
8104JR
Imaging Sensor
Viewing Angle
Turn on/off
Timer recording
Minimum Push interval
Motion Detection
Time Period
PIR Recording
Camera
Record
Consumption
Current (Max.)
Waterproof Capacity
Night Vision Distance
8107JR
656 x 488
Video Resolution
Power Supply
Push Notification
8105JR
1/5-inch color CMOS
DC 5V
o
o
o
70
50
50
400mA
400mA
600mA
IP54
IP54
IP66
5m (Max.)
5m (Max.)
20m (Max.)
Registered Mobiles
Dimensions( W x D x H )
OK:Options
OK:Options
MENU:Quit
Users can set according to the situation
of Minimum Push interval and time period
MENU:Quit
Approx. Weight
LCD Screen Type
Notice: Only when the motion detection and
PIR recording are opened at the same time,
push notification function will be effective.
LCD Screen Resolution
SD Card
Hard Disk
Registered Mobiles
Video Frame Rate
Monitor
2. Click "PUSH" to Register an account. When there is a movement
in front of the camera, it will send a push message to your smart
phone. As below shown:
Video Resolution
OK:Options
MENU:Quit
After successful registration,
the monitor will receive the
registered account name.
300g
615g
7"TFT LCD
800 x 480
Supports to 32GB
Supports to 1TB
30fps (max.)
CIF/VGA
.AVI
Date Output
USB 2.0
Power Supply
Dimensions( W x D x H )
1234
300g
Video Format
Consumption
Current (Max.)
1234
132 x 64 x 57(mm) 132 x 64 x 57(mm) 164 x 81x172(mm)
(exclude bracket)
(exclude bracket)
(include bracket)
Approx. Weight
DC 5V
700mA
214 x 157 x 26 (mm)
510g
Unobstructed
Effective Range
200m (Min.)
Operating Temperature
-10 C~50 C
Operating Humidity
15~85%RH
o
o
* All the specifications are subject to minor change without prior notice.
Remarks:
1. Only when the receiver in the real-time state, to view the image.
2. If the Device ID was unable to get to the RX, indicates that RX
did not normally connect outer net, need to check your network.
3. If everything is normal, but still not in the mobile phone client
to view images, please close the client software running always
in the background, please try it again.
4. The network adapter does not support hot plug, Before open
the RX, The network is connected with the RX.
27
Warnings
● This product shall not be exposed to water either by dripping,
splashing, immersing, etc., unless otherwise indicated.
● Turn off the system if it is not in use.
● This product can only be completely disconnected for from its
power source by unplugging the power adapter.
● Do not cut the DC power cable of provided with this product
to fit with another power source.
28
FAQ
1. Why the screen doesn’t display any monitoring picture after
the camera is connected?
Answer: 1. Please check whether “Active” is set to “ON”.
2. Please check whether pairing succeeds.
2. The recording time is set already or the motion detection
recording is enabled, but the receiver does not start recording
when the time comes or a motion is detected. Why?
Answer: 1. Check whether the storage medium is inserted.
2. Check whether the storage medium is full.
3. The system does not respond when the playback button
is
pressed. Why?
Answer: Please check whether the current camera is in the recording
status. If it is in the recording status, the system will not
respond when this button is pressed.
4. Why cannot see human body in the picture area, when the alarm
occurs?
Answer: For the product, the angle of sensor is greater than that
of lens. When human body moves beyond the angle of lens and
within the angle of senor, an alarm can also occur on the device.
However, the display device cannot display human body's move
in the picture area.
Troubleshooting
Symptoms
No display
Solutions
Confirm the adapters of receiver and camera connect
OK
Re-pair the camera and receiver. See more details
in the manual
Failure in USB connection. Confirm the USB plug
connects OK
Failure in setting, see more details in the manual.
Failed
to record
Failure in SD card connection. It is suggested to use SD
card with brand like Kingston,SanDisk,Panasonic,
Kingmax or Transcend
Failure in Mobile Hard disk connection. It is suggested to
use hard disk with brand like IBM, TOSHIBA or Seagate .
The format of mobile hard disk should be FAT32 instead of NTFS.
Poor
picture quality
interference in the surrounding environment, such
as WIFI and other wireless devices.
The antennas of receiver and camera install unwell.
IR night version is on, which leads to the color cast.
Confirm the adapter and camera connect OK.
camera off
Confirm the setting of both Active and Display Items.
See details in the manual.
Failure in alarm PIP setting. See more details in the
manual.
blocked by some moving objects or barrier.
interference from light,thunder,infrared or
microwave etc.
No alarm
or fault alarm
FCC Information
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference;
(2) This device must accept any interference received, including
interference that may cause undesired operation. Changes or
modifications not expressly approved by the party responsible
for compliance could void the user ’s authority to operate the
equipment.
29
The stored recording image keeps unchanged, because
the angle of the pyroelectric sensor is wider than
the camera angles, the sensor is triggered beyond
the camera view angle.
Objects pass through the recording effective area too
quickly in less than 2s.
Fresnel shell is dirty.
30
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement