Alpha Continuity Plus 6K-10K
NEW: Power Factor 1.0
True Double Conversion On-line Technology
The Alpha Continuity Plus 6K-10K Series completely regenerates utility
power. It not only corrects and cleans the utility power, but the VFI(Voltage
Frequency Independence) of the Alpha Continuity Plus 6K-10K Series
complies with the international EN62040-3 standards.
Dual Input Connections
The Alpha Continuity Plus 6K-10K Series provides single input connections as
standard. Optional input terminal connections for the bypass and rectifier are
available.
LCD/LED Mimic Panel
A precise LCD/LED display provides real time status and parameter
readings. These include AC Input and Output Voltage, Frequency, Battery
Voltage, Load Level, UPS temperature, etc. A full size, user-friendly
microprocessor based LCD display, provides advanced monitoring
functions and simple operation.
Silent Fan Control
The Alpha Continuity Plus 6K-10K Series employs variable-speed, forced air
cooling fans. These fans will vary in speed according to the percentage of load.
This variable-speed control ensures a low audible noise level making the Alpha
Continuity On-line UPS Series suitable for most environments including offices
and hospitals.
Remote testing of the major operating UPS functions
Communicate via SNMP/WEB card.
Access UPS functions via the WEB.
Super Compact Convertible Design
The Alpha Continuity Plus 6K-10K Series is small and compact. Install the UPS in
a 19” rack and utilize the space efficiently. Optional rack mount rail available.
Variety of Customer Options Slots
The Alpha Continuity Plus 6K-10K Series also provides one or two additional
Customer Options Communication slot(s) in additional to the standard RS232.
An internal 2nd RS232, USB, RS485, Dry Contact, or WEB/SNMP card provides
isolated contacts for industrial and remote alarm applications.
Simple and Easy To Use
The LCD front panel provides direct access to the DSP controller. Changes
to the UPS operational modes and parameters such as output voltage
settings, fine adjustments for frequency, bypass voltage settings as well as
alarms status may be easily performed.
Optional External Battery Charger
With its isolation conversion technology plus precision control, the optional
charger can be installed in Parallel operation up to 4 units.
Customer to supply 5-15R receptacle. The specifications are as follows:
AC Input Range
100-280Vac, 45-65Hz
Maximum Power Output
1000W, continuously
Operation Mode
Constant Voltage with Current Limitation
Smart ECO Mode
Energy Saving using ECO mode.
Maximum Parallel Units
Up to 4 units
Matching Battery Cabinet
Add matching battery cabinets and extend the back up time up to several
hours.
Protections
Over-voltage, Against Output Short-Circuit &
Isolated devices for Opposite Polarity
Connection
Power Range and Runtime Scalability
The Alpha Continuity Plus 6K-10K Series provides an excellent return on
your investment. The system is fully modular and allows you to increase the
overall power output, battery runtime, and redundancy as your needs and
requirements grow. The modular design eliminates any single point of
failure.
Single Phase On-line UPS Series with PF 1.0
Communication Capability
The Alpha Continuity Plus 6K-10K Series is shipped with monitoring and
shutdown software. The software allows the control and graceful shutdown
when utility power fails.
Energy-efficient UPS
The AC to AC efficiency of the Alpha Continuity Plus 6K-10K Series may be
up to 90% at 25% load and higher with larger loadings in normal VFI
(Voltage and Frequency Independent) operation. Using the ECO mode, an
efficiency of up to 97% can be achieved.
Emergency Power Off
The Emergency Power Off enables users to remotely shutdown the UPS.
Alpha Continuity Plus 6K-10K
Alpha Continuity Plus 10000 Tower Configuration
Mounted on the rear of the UPS or the wall
Mounting
Dimension
Alpha Continuity Plus 6000 Rack Configuration
mm
282H x 166W x 86D
> NEW: Power Factor 1.0
3.2kg
Net Weight
> Feature rich On-line UPS Series with superior output power factor, enabling energy
efficient system performance
Parallel Distribution Box
The Alpha Continuity Plus 6K-10K Series automatically manages the
End-Discharge voltage of the internal batteries according to the load. The
ABDM function prevents the deep discharge of the batteries during a
power failure.
> Simple parallel installation simplifies the setup of N+1 redundant systems
> Up to 4 units working in parallel increases potential power output capacity
> LCD / LED display panel provides user-friendly interface to UPS
> Emergency shutdown control through EPO complies with national safety regulations
and local code
External Battery Pack Continuity Plus 6000 and 10000
> Hot swappable battery allows replacement without interruption to critical loads
For contact information please visit www.alphatechnologies.com
The Alpha Group >
North America
Europe, Middle East & Africa
USA
Tel: +1 360 647 2360
Fax: +1 360 671 4936
Cyprus
Tel: +357 25 375 675
Fax: + 357 52 359 595
Germany
Tel: +49 9122 79889 0
Fax: +49 9122 79889 21
Canada
Tel: +1 604 436 5900
Fax: +1 604 436 1233
Russia
Tel: +7 495 925 9844
Fax: +7 495 916 1349
United Kingdom
Tel: +44 1279 501110
Fax: +44 1279 659870
Lithuania
Tel: +370 5 210 5291
Fax: +370 5 210 5292
Alpha Technologies reserves the right to make changes to the products and information contained in this document without notice.
Copyright © 2017 Alpha Technologies. All Rights Reserved. Alpha® is a registered trademark of Alpha Technologies.
Asia Pacific
Latin & South America
P.R. China
Tel: +852 2736 8663
Fax: +852 2199 7988
Contact USA office
The Alpha Continuity Plus 6K-10K Series with full-time Digital Signal Processor control technology is the perfect solution for mission critical
users who demand high reliability, availability and performance from a UPS. Input power factor correction, high efficiency and parallel
redundant capability provide a superior level of power quality for sensitive electronic equipment and computer loads.
(04/2017)
member of The
Group™
Your Power Solutions Partner
Alpha Continuity Plus 6K-10K Series
Specifications
Models
Continuity Plus 6K
Continuity Plus 10K
Leakage Current
<3mA at Full Load
Models
Continuity Plus 6K
Continuity Plus 10K
88H x 440W x 685D
132H x 440W x 685D
Mechanical
Dimensions
Input
Voltage Window
160 to 280Vac
Frequency
45-65Hz
Phase/Wire
Single, Line + Ground
Power Factor
Up to 0.99 at 100% Linear Load
Current THD (100% linear load)
< 7%
mm
Input/Output Connection
Hardwire
External Battery Connection
Plug-in & Play
Net Weight
19kg
22kg
Environment
Output
Operating Temperature
0-40°C
Temperature Warning
The battery design life is based on a temperature of 25°C , Ambient temperature above this range will affect battery life
Voltage Window
200/208/220/240Vac
Altitude
0~2000M up to 40°C, 3000M up to 35°C
Voltage Adjustment
Nominal +1%, +2%, +3%, -1%, -2% or -3%
Humidity
90% RH Maximum, Non-Condensing
Voltage Regulation
±1%
±2%
Noise
<50dB (at 1 Meter)
Capacity
6000VA/6000W
10000VA/10000W
Computer Interface
Rated Power Factor
1.0
Interface Type
Standard RS232 Interface
Wave Form
Sine Wave, THD<3% (no load to full load)
Communication Slot
2nd RS232, USB, RS485, Relay Contact or SNMP Card
Frequency Stability
±0.2% (Free Running)
Agency Compliance
Frequency Regulation
±1Hz; ±3Hz
Quality Assurance
ISO9001 Certified
Transfer Time
0ms
Safety Standard
EN62040-1-1, UL1778
Crest Factor
3:1
EMC Standard
EN62040-2, EN61000-3-2, EN61000-3-3, FCC Class A
Efficiency (AC to AC, Normal)
Up to 91%
Marks
CE
Efficiency (AC to AC, ECO)
Up to 96%
Autonomy
>=5 min with Battery Pack(s)
DC Start
Yes
Battery Pack
Model
BP Continuity Plus 6K, 10K
9Ah
Battery
Battery Type
Type
Sealed Lead Acid Maintenance Free
Maximum Quantity
Capacity
12V/9Ah
Output Voltage
240Vdc
20pcs in Battery Packs
Weight Without Batteries
18.0kg
240Vdc
Weight With Batteries
Recharge Time
5 hours to 90%
Dimensions
Built-in Charger (max. Charging Current)
2,1A
Quantity
Voltage
Display
Status On LED + LCD
Line Mode, Backup Mode, ECO Mode, Bypass Supply, Battery Low, Battery Bad/Disconnect, Overload, Transferring with
interruption & UPS Fault.
Readings on LCD
Input Voltage, Input Frequency, Output Voltage, Output Frequency, Load Percentage, Battery Voltage & Inner
Temperature.
Self-Diagnostics
Upon Power-on, Front Panel Setting & Software Control, 24-hour routine checking
Alarms
Line Failure, Battery Low, Transfer to Bypass, System Fault Conditions
Audible and Visual
Protection
Overload
(w/simulated thermal tripping I-T Curve)
Inverter Supply: 105%~150% for 160 seconds ~ 2 cycles before switching bypass.
Bypass Supply: 105%~200% for 500 seconds ~8 cycles before stopping supply load.
Short Circuit
Switch off Immediately
Overheat
AC Mode: Switch to Bypass
Backup Mode: Switch off the UPS
Battery Low
Alarm and Switch Off
Noise Suppression
Complies with EN62040-2
Without Isolated
Transformer Module
Heat Dissipation
(At Full Linear Load) With Isolated
Transformer Module
Your Power Solutions Partner
mm
(Specifications are subject to change without prior notice)
Parallel Redundant On-Line UPS
Using our field proven Digital Signal Processor(DSP) with SMD techniques, the Alpha
Continuity Plus 6K-10K Series achieves high reliability and greater immunity from
utility power problems. The front display panel provides all major systems parameters
and operational status of the UPS that include full diagnostics for simple, easy
servicing. The Alpha Continuity Plus 6K-10K Series uses a patented inverter control
technology that allows it to achieve N+1 scalable redundant power without the use of
additional components. The Alpha Continuity Redundant parallel configuration also
eliminates any single point of failure.
Simple Parallel Installation
To increase the power capacity or configuring a parallel redundant UPS system, up to
3 additional Alpha Continuity Plus 6K-10K Series are simply interconnected using the
CAN-bus RJ45 cables on the rear of the Continuity Redundant series UPS.
Programmable Frequency Converter
The Alpha Continuity Plus 6K-10K Series may be used as a frequency converter. Simple
programming through the front LCD panel provides the convenience of 50 or 60Hz.
Complies with EN61000-4-5
Spike Suppression
20pcs
<450W
<600W
<615W
<1100W
Intelligent Self-Diagnostics
The Alpha Continuity Plus 6K-10K Series with DSP Control, systematically checks each
component and displays the result using on LCD display. This feature allows service
technicians the ability to pinpoint and repair the UPS very quickly.
63kg
132H x 440W x 685D
High Input Power Factor and Low Current THD
The Alpha Continuity Plus 6K-10K Series provides a ‘clean’ rectifier connection to
utility source. It meets today’s industry standard for energy saving with low
reflected harmonic pollution to utility. The Alpha Continuity Plus 6K-10K Series
achieves up to 0.99 Input Power Factor as well as <7% Input Current THD (<30%
model 10KP).
Cold Start Function
The Alpha Continuity Plus 6K-10K Series may be powered up without the
presence of utility, providing AC power for immediate power requirements.
Full-time Digital Signal Processor Control
The Alpha Continuity Redundant Full Time DSP control system ensures a pure
sinewave on the input and the output of the UPS. The DSP control also provides the
user with simple access to the UPS systems’ operational information via the front
display panel.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement