video with one-way audio vat/var1200

video with one-way audio vat/var1200
VAT/VAR1200
PRODUCT SPECIFICATION
VIDEO WITH ONE-WAY AUDIO
FEATURES
• AM Video Transmission
• NTSC, PAL, SECAM Compatible
V
• Full Color Compatibility
• 600 Ohms Audio Input Impedance
A
• Transmits Balanced or Unbalanced Line-Level
Audio (2.2 Volts Peak-to-Peak)
DESCRIPTION
• Full Range Peak-to-Peak Automatic Gain Control (AGC)
The IFS VAT/VAR1200 video and audio transmitter/receiver supports
the simultaneous transmission of video and audio over one multimode
fiber optic cable. Plug-and-play design ensures ease of
installation requiring no electrical or optical adjustments. The modules
incorporate power and AGC status indicating LED’s to monitor
proper system operation. The modules are available in either standalone or rack mount versions.
• No In-field Electrical or Optical Adjustments Required
• Power and AGC Status Indicating LED’s to Monitor
System Performance
• Automatic Resettable Fuses on all Power Lines
APPLICATION EXAMPLES
• Hot-Swappable Rack Modules
• Fixed Video with One-Way Audio
• CCTV and Paging (Public Address) Systems
• One-Way Teleconferencing Link
• Distance Learning
• Distances up to 2.5 miles (4 km)
without Repeaters
Available at:
• Comprehensive Lifetime Warranty
www.
.com
• A & E Specifications, (CSI)
• AutoCAD Drawings
• Operation Manuals
• Technical Bulletins
ORDERING INFORMATION
PART
NUMBER
MULTIMODE VAT1200
62.5/125µm** VAR1200
ACCESSORIES♦
OPTIONS
DESCRIPTION
FIBERS
REQUIRED
OPTICAL
PWR BUDGET
MAX.
DISTANCE*
1
14 dB
2.5 miles (4 km)
Video Transmitter/Audio Transmitter (850 nm)
Video Receiver/Audio Receiver (850 nm)
PS-24VACCT 24 volt AC Center Tap Power Supply (Included)
PS-24VACCT-230 24 Volt AC Center Tap Power Supply 230 VAC Input (Included if specified at time of order)
Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately)
Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)
* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. ** For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
♦ All accessories are third party manufactured.
International Fiber Systems, Incorporated ■ DESIGN CENTER (888) 999-9IFS or (203) 426-1180
FAX (203) 426-3326 ■ [email protected] ■ For an office near you go to: www.ifs.com
With Offices in Asia Pacific ■ Australia ■ Europe ■ Latin America
71
VAT/VAR1200
TECHNICAL SPECIFICATION
VIDEO WITH ONE-WAY AUDIO
SPECIFICATIONS
ELECTRICAL & MECHANICAL
Power:
Surface Mount:
Rack:
Number of Rack Slots:
Current Protection:
VIDEO
Video Input/Output:
Bandwidth:
Differential Gain:
Differential Phase:
Tilt:
Signal-to-Noise Ratio (SNR):
1 volt pk-pk (75 ohms)
5 Hz - 10 MHz
5% typical
5° typical
<1%
60 dB (typical)
AUDIO
Input/Output:
Bandwidth:
Input Impedance:
2.2 Volts Peak-to-Peak
300 Hz-5 Khz
600 ohms (single ended or differential)
WAVELENGTH
850 nm, Multimode
NUMBER OF FIBERS
1
21 - 24 VAC C.T. @ 150 mA
From Rack
1
Automatic Resettable Solid-State Current
Limiters
Meets IPC Standard
Circuit Board:
Size (in./cm.) (LxWxH)
Surface Mount:
Rack Mount:
Shipping Weight:
7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 5.1 cm
7.7 x 5.0 x 1.0 in., 19.6 x 12.7 x 5.1 cm
< 2 lbs./0.9 kg
ENVIRONMENTAL
MTBF:
Operating Temp:
Storage Temp:
Relative Humidity:
CONNECTORS
Optical:
Power and Audio:
ST
Terminal Block with Screw Clamps
Video:
BNC (Gold Plated Center-Pin)
> 100,000 hours
-40° C to +74° C
-40° C to +85° C
0% to 95% (non-condensing)†
† May be extended to condensation conditions by adding suffix ‘–C’ to model
number for conformal coating.
AGENCY COMPLIANCE
Federal Supply Schedule
MADE IN THE USA
Contract No. GS-07F-0049M
Complies with FDA Performance Standard for Laser Products,
Title 21, Code of Federal Regulations, Subchapter J
OPTICAL POWER BUDGET
FIBER
WAVELENGTH
Multimode
62.5/125µm**
850 nm
TRANSMITTER
MODEL
OUTPUT
VAT1200
25µw
(-16 dBm)
RECEIVER
MODEL SENSITIVITY
VAR1200
OPTICAL
PWR BUDGET
MAX.
DISTANCE*
14 dB
2.5 miles (4 km)
1 µw
(-30 dBm)
* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. ** For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
SYSTEM DESIGN
up to 2.5 miles
(4 km)
Video
(Coax)
VAT1200
ifs
Video
VAR1200
International
ifs
Fiber
Systems
Incorporated
203.426.1180
(Coax)
International
Fiber
Systems
Incorporated
203.426.1180
1 Fiber
62.5/125µm MM
Audio
Pre-Amp
Audio
Amp
TEL (203)426-1180 ■ FAX (203)426-3326 ■ www.ifs.com ■ [email protected]
16 Commerce Road ■ Newtown, CT 06470
Due to our continued effort to advance technology, product specifications are subject to change without notice.
72
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement