VisionSD8 8 Channel SD Video Capture Card Advanced Graphics Display Technology STREAMING SUPPORT DESCRIPTION The VisionSD8 is an 8 channel PCI express video capture DirectShow drivers for WDM Streaming driver supports the card. The card supports PAL, NTSC and SECAM in both following applications, to encode, record and stream video composite and S-video input formats. VisionSD8 supports over networks or the Internet: deinterlaced video capture and display at 25/30 frames/sec • Microsoft Media Encoder® • VLC The VisionSD8, a stand alone PCIe x4 plug in card, • StreamPix delivers extreme performance with 480MB/s transfer bus • VirtualDub bandwidth. This industry beating performance makes the • Adobe Flash Encoder VisionSD8 ideal for a wide range of applications including: • AMCap • Any other DirectShow encoding software for real-time video overlays. • Multi-display presentation software: Recommended by industry leaders Dataton WATCHOUT™ VIDEO STREAMING • Digital Signage • Machine Vision: Acquire high resolution camera For streaming applications, the VisionSD8 can be used with outputs Windows Media Encoder to compress and stream captured • Voyage Data recorders: Capture radar images • Simulation/Military: Acquire high resolution video and simulation for command and control video. To replay the video, use Windows® Media Player. Any application compatible with Windows® DirectShow technology can use the VisionSD8 due to its built-in WDM support. FEATURES SOFTWARE • Four Lane PCI express video capture card • Eight simultaneous capture channels • Support for any mix of NTSC,PAL SECAM • Eight composite/S-Video video inputs • 32MB on board frame buffer • On board processor for real time mode and sync The VisionSD8 is supplied with a powerful software application for configuring the timing and format of the input sources and displaying the data. Simply connect your video source into the card, run the VisionSD8 application to automatically detect the video source format and display the captured video in a window on your desktop. WALL CONTROL SOFTWARE detection • When used with the Datapath range of graphics adapters, the CPU load is negligible even if the image is being upscaled to a video wall, resulting in real time performance The VisionSD8 card is supplied with a free version of Wall Control without the advanced features. Wall Control presents a representational window of the entire display wall showing position and size of video windows. • Auto video mode and no-signal detection • Adjustments for colour, brightness and contrast • Daisy chain input to output with selectable termination • High performance DMA with scatter gather • Data Transfer at 480MB/s • Dynamic Input Source Selection • Supports up to 16 windows with any mix of input Datapath Wall Control software enables you to configure your multi-screen display, launch video overlays and create a wall layout configuration. With the full version it is possible to save layouts and recall them for future use and also operate Wall Control on a remote PC via a network connection. MODELS AVAILABLE channels • Administrator Mode • SDK available for OEM customers Code Description VisionSD8 8 channel SD Capture Card PCIe All products are shipped with the latest software available, unless stated otherwise. Special requirements may be organised by contacting our Sales team. SPECIFICATION Board Format PCI-e x4 plug-in card, 110mm x 170mm. PCI-e bus master with scatter gather DMA providing maximum data rate of 480MB/s. Connectors Two D connectors for SD inputs. SD Maximum Capture Resolution 8 x 720x576x16bit. Frame Buffer Memory 32 MB. Video Format Options PAL, NTSC, SECAM or S-Video. Operating System Support Windows® XP, Windows® Vista, Windows® Server 2003, Windows® Server 2008 and Windows® 7. Power Requirements Max current at +3.3V – 0.25A. Max current at +12V – 0.6A. Max power – 8 Watts. Operating Temperature 0 to 35 deg C / 32 to 96 deg F Storage Temperature -20 to 70 deg C / -4 to 158 deg F Relative Humidity 5% to 90% non-condensing. Warranty 3 years We are continously developing the technology used within our product ranges delivering outstanding innovative solutions, therefore the specification may change from time to time.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project