The single-box solution that`s taking energy efficiency to a new level

The single-box solution that`s taking energy efficiency to a new level
MULTICAL® 6M2
The single-box
solution that’s taking
energy efficiency to a
new level
• Cooling
• Solar heating
• Geothermal
MULTICAL® 6M2
Keep Cool – Stay Warm
Whether comfort cooling or solar heating, you can get the maximum
energy efficiency of your system with a MULTICAL® 6M2 energy meter.
MULTICAL ® 6M2 lets you monitor the performance of a heating
or cooling system 24/7 to get the most out of your clean energy
investment.
Tailored for mixed fluids, MULTICAL® 6M2 is compatible with most
common antifreeze liquids (ethylene & propylene glycol, tyfocor,
antifrogen) used in industrial/commercial and domestic applications.
99 Sub-zero temperature measurement
99 Programmable chemical composition
and concentration level
99 Adjustable for any applications:
heating, cooling, solar and geothermal
Mixed fluids have a lower specific heat capacity compared to
that of water. The type of antifreeze liquid and the concentration
are freely programmable and thus MULTICAL® 6M2 can
compensate for the unique specific heat capacity in each
application, ensuring a high accuracy regardless of the chemical
composition or the application.
MULTICAL® 6M2 can operate in sub-zero temperatures, with a
temperature range of -40…+140 °C.
MULTICAL® 6M2 can be fitted with a wide range of
communication modules to allow data integration with
Building Management Systems through pulsed outputs, M-Bus,
LonWorks, BACnet or Modbus.
2
A Kamstrup meter
as you know it:
• Reliable
• Robust
• Accurate
MULTICAL® 6M2
Keep track of your
energy efficiency
As with all Kamstrup meters, MULTICAL® 6M2 can be supplied
with power or battery. The battery has 13 years lifetime.
MULTICAL® 6M2 is your guarantee that energy in any mixed
fluid application is monitored and measured accurately
during the entire lifetime of the meter with an absolute
minimum of maintenance checks. The operating costs are
minimal and cost saving thereby a reality.
Hassle-free installation
MULTICAL® 6M2 is a single-box solution
containing a preprogrammed integrator, a
mechanical flow meter and temperature
sensors. No need for configuration or
pairing of calculator and flow part; just
bring the box to the installation site as it is.
Sharp analysis
MULTICAL® 6M2 constantly monitors power supply and the
function of the temperature sensors. If an error occurs an
INFO code will appear in the display. An info logger registers
and stores all irregularities and changes. MULTICAL® 6M2 is
also fitted with an integral RTC and saves yearly, monthly,
daily and hourly loggers which can easily be read and
analysed as part of the daily operations optimisation.
Easily adjustable
With the free download-able configuration software METERTOOL you easily
configure/reconfigure MULTICAL® 6M2 and change the chemical composition to
fit any installation.
Fluid codes
MULTICAL® 6M2 is programmed to a certain
chemical composition and concentration level
based on the 4 digit fluid code.
Please note that there is no proportional relationship between
the K-factor and the temperature or resolution.
* The K-factor is calculated with a 30 % resolution and with
temperatures at 15 °C in inlet and 5 °C in outlet.
**The K-factor is calculated with temperatures at 15 °C in
inlet and 5 °C in outlet. The fluids are premixed.”
Fluid
Fluid code
Relative K-factor [%]
Water
-
100
Monoethylene glycol
1130
91
Propylene glycol
1330
94
Tyfocor
2030
95
Tyfocor L
2130
94
Antifrogen N
3030
92
Antifrogen L
3130
95
Tyfocor LS Standard
2200
88
Tyfocor LS Arctic
2300
83
Tyfocor LS Medit.
2400
95
Antifrogen SOL HT
3200
83
*
**
3
MULTICAL® 6M2
We make progress
for others
Kamstrup is a world-leading supplier of energy and water metering
solutions. Our solutions support utilities and are also applied in
properties with individual metering. For 70 years, we have delivered
reliable, cost-effective ways to measure and manage energy and
water consumption worldwide.
By anticipating our customers’ challenges, we enable them to run
a better business and inspire smarter, more responsible solutions
for the communities they serve. Our solutions include consumption
meters, smart metering systems, hosting and services, analytics
and smart grid applications. All products are produced with the
highest certifications for environmental safety and quality in our
automated production facilities in Denmark.
58113168_A1_GB_02.2015
We are represented in more than 60 countries worldwide by local
offices or by distributors.
Kamstrup A/S
Industrivej 28, Stilling
DK-8660 Skanderborg
T: +45 89 93 10 00
F: +45 89 93 10 01
[email protected]
kamstrup.com
4
Think forward
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement