Imprimer CATALOGUE eng.qxd

Imprimer CATALOGUE eng.qxd
Lincoln Electric Europe
Equipment
Catalogue
Lincoln Electric Europe
Why to buy Lincoln Electric ?
The Lincoln Electric Company
• is one of the largest manufacturers of welding consumables
and equipment in Europe.
• has been manufacturing in Europe for more than 75 years.
• has 17 sales offices across Europe and more than 1500
people working to satisfy its Customers.
• offers complete welding solutions
full line of stick electrodes, TIG, MIG/MAG, metal- and
flux-cored wires as well as submerged arc consumables
for carbon and low alloy steel, stainless steel, hardfacing,
cast iron and non-ferrous applications.
- equipment that reflects the latest industry developments
including stick welders, TIG welders, CV MIG welders,
CC/CV multiprocess welders, plasma cutting, engine
driven welders, wire feeders, robotic/automation systems,
accessories, and environmental systems.
welding procedures for industry
base and advanced welding trainings
To learn more, visit www.lincolnelectric.eu
Ask Lincoln, The Welding Experts ®
www.lincolnelectric.eu
Table of contents
Using this Catalogue ........................ 4
Stick Welders .............................. 5-17
TIG Welders .............................. 18-26
MIG Welders ..............................27-42
Pulse / STT Welders ..................43-49
Semi-automatic Wire Feeders
50-61
Subarc welders ........................ 62-69
Automatic Wire Feeders ............70-75
Engine Driven Welders ............ 76-79
Plasma ...................................... 80-83
Environmental systems ..............84-86
Web Information ............................ 87
3
Using this Catalogue
Stick Welders
Opening Paragraph
This is a general description
of the product. It may also
include features and
applications.
Advantage Lincoln
This section highlights the
key features and benefits of
the product.
V270-reliSability
vertec
In
tability, robust
Powerful por
Product Name
Official Lincoln
product name.
®
Processes
been
TIG welder has
®
ter
-S Stick and Lift
latest digital inver
The Invertec V270
on with
factured using the
designed and manu both a rugged industrial constructi
ining
technology, comb
ble
cteristics.
ine makes it suita
mach
excellent arc chara
this
of
na
but solid build
a generator or withi
The lightweight
with
n
nctio
site in conju
mum flexibility.
for operation on
nt, providing maxi
workshop environme
Stick, Lift TIG
DC
Output CC
Input
Product
Number
V270-S
K12022-1
V270-S - 2V
K12022-3
Input
Power
400/3/50-60
Rated Output
Current/Voltage/
Duty Cycle
Carry
2m-input cable,
Order
K12022-1
K12022-3
Ordering
To order, select the
product number that best fits
your welding needs.
S
®
Invertec V270S - 2V
®
Invertec V270-
Product Picture
Detailed photo of Lincoln products.
Fuse
size
20A
270A/30,8V/35%
200A/28V/100%
Hz
des
Base Unit Inclu ing strap.
characteristics.
• Excellent arc
allows the use of
ut of 270 amps
• Maximum outp
5.0 mm.
electrodes up to
cellulosic welding
and
basic
rutile,
• Excellent stick
performance.
Start"as standard.
Force" and "Hot
• Adjustable "Arc
control panel.
and user-friendly
nect
• Full featured
with auto-recon
el,
mod
on
versi
• Available in dual
between 230/400V.
remote
enables use on
compensation
• Line voltage
rator.
e driven gene
power from an engin
ten contamination.
TIG” with no tungs
nt.
• Features “Lift
g of welding curre
allows precise settin
• Digital display
ards for safety and
stand
CE
, ROHS and
• Meet IEC974-1
reliability.
Product
Name
Input & Output Icons
See below for descriptions.
3 50 60
PHASE
Output
Range
5-270 A
Max. OCV: 48V
Dimensions
HxWxD
(mm)
385 x 215 x 480
Net
Weight
(kg)
Stick Welders
Catalogue Section
Identifies Catalogue section
for easy-to-find products.
13,5
35 / 20A
230/400/3/50-60
Technical Specifications
Common specifications,
ratings, dimensions and
weight of the product.
11
lectric.eu
www.lincolne
Output Icons
constant current stick
CC For
and TIG processes
CV
For constant voltage MIG,
flux-cored and subarc
processes
For multi-process constant
current or constant voltage
applications
Input Icons
1 Single phase input power
Using this catalogue
CC
CV
AC
DC
AC
DC
115
VAC
PHASE
3
Three phase input power
4
www.lincolnelectric.eu
kW
Continuous auxiliary
power output
2-roll wire feeder
4-roll wire feeder
Alternating or direct
current welding output
STT Advanced waveform
115 volt AC
Wire feeder input power
50
60
50/60 Hertz input power
D
Engine Driven –Diesel
42 volt AC
Wire feeder input power
40
40 volt DC
Wire feeder input power
VDC
10
Direct current
welding output
42
VAC
PHASE
1 3 Single or three phase
input power
PHASE
Alternating current
welding output
control technology
Hz
Stick Welders
Choose Lincoln® Stick Welders For:
• Weld a Wide Range of Materials and
Thicknesses
• Conventional or Inverter Models
Warranty (years)
Arc Force
115/230 Volt
Auto-Sensing
FEATURES
Arc Gouge
TIG Scratch
Voltage (V)
PROCESS
5-130
230
®
Invertec V145-S
CC
DC
5-145
230
• •
2
Invertec V160-S
CC
DC
5-160
230
• •
2
®
Invertec V160-S-2V
CC
DC
5-160
115/230
• •
2
Invertec® V205-S
CC
DC
5-200
230/400
• • •
2
Invertec V270-S
CC
DC
5-270
400
• • •
2
Invertec® V270-S-2V
CC
DC
5-270
230/400
• • •
2
Invertec® V405-S
CC
DC
5-400
• • •
2
LINC 405-S
CC
DC
15-400
• •
2
LINC 405-SA
CC
DC
15-400 230/400
• • •
2
LINC 635-S
CC
DC
15-670 230/400
• •
2
LINC 635-SA
CC
DC
15-670 230/400
• • •
2
Idealarc® R3R-600-I
CC
DC
75-625
230/380/
440
• • •
3
®
KEY:
Excellent
Good
Optional
400
230/400
Meters
DC
Hot Start
CC
Lift TIG
Handy Stick
Stick
Polarity
3-Phase
Inverters
INPUT
Current
Range
(Amps)
®
3-Phase
Rectifiers
OUTPUT
Mode
1-Phase
Inverters
MODEL
1
•
•
Stick Welding : Process & Selection Chart
SMAW Process
Shielded Metal Arc Welding / Stick (M.M.A.) Welding
Welding direction
Electrode core
Shielding atmosphere
Coating
Arc
Molten slag
Solidified slag
Weld pool
Parent material
Solidified weld metal
In this welding process, an electric arc is created between a coated consumable electrode and
the work piece to be welded, causing the parent material to be fused together and the electrode
to melt. The electrode is of similar material as the parent material, and by melting provides the
weld (or joint) with a reinforcing filler material. The electrode may be coated with basic, rutile or
cellulose material, and as the coating burns it protects the arc and weld pool from the atmosphere
with a gaseous shroud, the slag which solidifies over the newly deposited weld also protects it
from the atmosphere.
Selection Chart for Stick Welding
V205-S
Stick Welders
V205-S
Stainless
Steel
High Recovery
Arc Gouge
6
www.lincolnelectric.eu
Stick Welders
Handy Stick
You cannot get more portable than this !
• Excellent arc characteristics for Rutile and Basic
• Small and powerful. Only 4,5kg
Processes
• Ready to weld. Cable set included
Output CC DC
Stick
• Meet IEC974-1, ROHS and CE standards for safety and
reliability.
1 5060
Input
PHASE
Hz
Base Unit Includes
5m-input cable, work lead and cable 2m,
electrode holder and cable 5m
Order
Ø(mm)
2,0
2,5
3,2
Basic
✗
✗
✗
✗
✗
✗
Rutile
HANDY STICK
Product
Name
Product
Number
Input
Power
Rated Output
Current/
Duty Cycle
Fuse
size
Output
Range
Dimensions
HxWxD
(mm)
Net
Weight
(kg)
HANDY
STICK
K10421-1
230/1/50-60
130A/35%
16A
5-130 A
320 x 200 x 430
4,5
Stick Welders
K10421-1
7
www.lincolnelectric.eu
Stick Welders
Invertec V145-S
®
You cannot get more portable than this !
Welding arc behaviour has never reached such high levels of
smoothness and consistency. The Invertec® V145-S offers much
more than you would expect from a welder of its size.
Through Lincoln's unique 'Auto-adaptive Arc Force' feature the
V145-S instantly adjusts the weld current to maximise arc
stability, avoid sticking and minimise spatter.
Another unique feature of this machine is the ability to select
either a Soft or Crisp arc welding mode.
Processes
Stick, Lift TIG
DC
Output CC
Input
1 5060
PHASE
Hz
Base Unit Includes
2m-input cable, carrying strap.
• Excellent arc characteristics for Rutile, Basic and
Cellulosic electrodes up to 4.0mm
Order
• Intelligent ‘Auto Adaptive Arc Force’ to avoid sticking and
minimise spatter.
• Two stick modes, Soft and Crisp, to select the right arc
dynamics for the electrode type
K12009-1
K12009-1P
K12009-3
Invertec® V145-S
Invertec® V145-S
“Package”
Invertec® V145-S - 12V
• Built in ‘Hot Start’ for excellent arc striking
• Lift TIG DC operation, with excellent striking without
tungsten contamination
• Fan on demand (F.A.N.™) built-in reduces power and the
intake of dust and fumes.
• 230V/1ph (16A) input power, long (60m) extension cable
and power generator capability to connect anywhere
• Ergonomic handle and carrying strap as standard
• Portable Package. ‘Ready to weld case’ including electrode
cable, ground cable, hand shield, chipping hammer and wire
brush
• Meet IEC974-1, ROHS and CE standards for safety and
reliability.
Stick Welders
Product
Name
Product
Number
Input
Power
K12009-1
V145-S
230V/1/50-60
K12009-1P
8
www.lincolnelectric.eu
Rated Output
Current/Voltage/
Duty Cycle
145A/25,8V/35%
105A/24,2V/100%
Fuse
size
Output
Range
16A (slow)
5-145 A
Max. OCV: 75V
Dimensions
HxWxD
(mm)
Net
Weight
(kg)
288 x 158 x 392
6
600 x 180 x 580
(suitcase)
11,7
Stick Welders
Invertec V160-S
®
Top arc quality in a small package
The Invertec® V160-S stick welder exhibits excellent arc
control, for popular Rutile and Basic electrodes. It is a
professional welder with built- in Hot Start and adjustable Arc
Force supporting Stick Electrodes up to 4mm. Add an optional
gas valve style TIG torch and you also have a very affordable
DC Touch-Start TIG welding machine. Its input (115V/230V or
230V according to the model) combined with its rugged
portable package makes it ideal for remote welding
applications.
Processes
Stick, Lift TIG
Output CC DC
Input
1 5060
PHASE
Hz
Base Unit Includes
2m-input cable, Carrying strap.
Order
• Provides wide range of operations with welding range of
6-160 DC amps.
• Excellent stick Rutile and Basic welding performance.
• Features adjustable Arc Force control.
• Advanced inverter technology for superior arc
performance.
• Available in dual version model, with auto-reconnect
between 115/230V.
• Features “Lift TIG” with no tungsten contamination.
• Line voltage compensation enables use on remote
power from an engine driven generator.
• Thermal and voltage overload protection.
K12016-1
Invertec® V160-S
230/1/50-60
K12016-3
Invertec® V160-S - 2V
115/230/1/50-60
Product
Name
Product
Number
Input
Power
V160-S
K12016-1
230/1/50-60
V160-S - 2V
K12016-3
115/230/1/50-60
Rated Output
Current/Voltage/
Duty Cycle
Fuse
size
160A/26,4V/35%
130A/25,2V/100%
32A / 16A
16A
Output
Range
5-160 A
Max. OCV: 48V
Dimensions
HxWxD
(mm)
Net
Weight
(kg)
320 x 200 x 430
10,5
Stick Welders
• Meet IEC974-1, ROHS and CE standards for safety and
reliability.
9
www.lincolnelectric.eu
Stick Welders
Invertec V205-S
®
Smart switching, full flexibility
The Invertec® V205-S Stick and Lift TIG welder has been
designed and manufactured using the latest digital inverter
technology, combining both a rugged industrial construction
with excellent arc characteristics.
The lightweight but solid build of this machine makes it
suitable for operation on site in conjunction with a generator
or within a workshop environment, providing maximum
flexibility. The smart switching 230/400V single phase allows
to connect the V205S virtually everywhere.
Processes
Stick, Lift TIG
Output CC DC
1 5060
Input
PHASE
Hz
Base Unit Includes
2m-input cable, Carrying strap.
Order
• Smart switching 230/400V single phase.
K12019 -1
Invertec® V205-S - 2V
• Excellent arc characteristics.
• Maximum output of 205 amps allows the use of
electrodes up to 4.0 mm.
• Excellent stick rutile, basic and cellulosic welding
performance.
• Adjustable "Arc Force" and "Hot Start"as standard.
• Full featured and user-friendly control panel.
• Line voltage compensation enables use on remote
power from an engine driven generator.
• Features “Lift TIG” with no tungsten contamination.
• Digital display allows precise setting of welding current.
• Meet IEC974-1, ROHS and CE standards for safety and
reliability.
Stick Welders
Product
Name
V205-S
Product
Number
Input
Power
K12019-1
230/400/1/50-60
10
www.lincolnelectric.eu
Rated Output
Current/Voltage/
Duty Cycle
200A/28V/35%
170A/26,8V/100%
Fuse
size
Output
Range
35/20A (slow)
5-200 A
Max. OCV: 48V
Dimensions
HxWxD
(mm)
Net
Weight
(kg)
385 x 215 x 480
16,8
Stick Welders
Invertec
V270-S
Powerful portability, robust reliability
®
The Invertec® V270-S Stick and Lift TIG welder has been
designed and manufactured using the latest digital inverter
technology, combining both a rugged industrial construction with
excellent arc characteristics.
The lightweight but solid build of this machine makes it suitable
for operation on site in conjunction with a generator or within a
workshop environment, providing maximum flexibility.
Processes
Stick, Lift TIG
Output CC DC
3 5060
Input
PHASE
Hz
Base Unit Includes
2m-input cable, Carrying strap.
• Excellent arc characteristics.
Order
• Maximum output of 270 amps allows the use of
electrodes up to 5.0 mm.
K12022-1
Invertec® V270-S
K12022-3
Invertec® V270-S - 2V
• Excellent stick rutile, basic and cellulosic welding
performance.
• Adjustable "Arc Force" and "Hot Start"as standard.
• Full featured and user-friendly control panel.
• Available in dual version model, with auto-reconnect
between 230/400V.
• Line voltage compensation enables use on remote
power from an engine driven generator.
• Features “Lift TIG” with no tungsten contamination.
• Digital display allows precise setting of welding current.
Product
Name
Product
Number
Input
Power
V270-S
K12022-1
400/3/50-60
V270-S - 2V
K12022-3
230/400/3/50-60
Rated Output
Current/Voltage/
Duty Cycle
270A/30,8V/35%
200A/28V/100%
Fuse
size
20A
35 / 20A
Output
Range
Dimensions
HxWxD
(mm)
Net
Weight
(kg)
5-270 A
Max. OCV: 48V
385 x 215 x 480
13,5
Stick Welders
• Meet IEC974-1, ROHS and CE standards for safety and
reliability.
11
www.lincolnelectric.eu
Stick Welders
Invertec V405-S
®
Powerful portability, robust reliability
The Invertec® V405-S Stick and Lift TIG welder is a portable
and robust peace of equipment providing excellent arc
characteristics. With its generator compatibility and complete
versatility it can be fully utilised anywhere from sites to
workshops. Featuring “Lift TIG”, “Hot Start” and an adjustable
“Arc Force”, this machine has enormous flexibility. The high
duty cycle of the machine supports continuous welding with a
wide variety of electrode types. The Invertec® 405-S has a
solid industrial construction with the features of a professional
Stick and Lift TIG welding machine capable of the toughest
jobs.
Processes
Stick, Lift TIG, Gouging
Output CC DC
Input
3 5060
PHASE
Hz
Base Unit Includes
2m-input cable.
Order
K12025-1
Invertec® V405-S
• Provides wide range of operations with welding range of
5-400DC Amps.
• Maximum output of 405 amps allows the use of
electrodes up to 6.3 mm.
• Excellent stick rutile, basic and cellulosic welding
performance.
• Infinitely variable "Arc Force" and "Hot Start".
• Full featured and user-friendly control panel.
• Fan on demand (F.A.N.™) built-in reduces power and the
intake of dust and fumes.
• Features “Lift TIG” with no tungsten contamination.
• Digital display allows precise setting of welding current.
• Meet IEC974-1, ROHS and CE standards for safety and
reliability.
Stick Welders
Product
Name
V405-S
Product
Number
Input
Power
K12025-1
400/3/50-60
12
www.lincolnelectric.eu
Rated Output
Current/Voltage/
Duty Cycle
400A/36V/35%
300A/32V/100%
Fuse
size
Output
Range
30A
5-400 A
Max. OCV: 48V
Dimensions
HxWxD
(mm)
500 x 270 x 610
Net
Weight
(kg)
31
Stick Welders
LINC 405-S & SA
The rugged and distinguished workhorse
The LINC 405 is an exceptionally rugged conventional stick
rectifier built to be used under harsh environmental conditions.
The unit is available in two versions, the basic LINC 405-S
ready to support stick welding with all rutile, basic and
cellulosic electrodes and the LINC 405-SA completed with all
sophisticated features.
• Rugged conventional welding rectifier with excellent arc
characteristics.
• Capable to weld Rutile, Basic and Cellulose electrodes
Processes
Stick, Lift TIG DC (-SA), Gouging
Output CC DC
Input
3 5060
PHASE
Hz
Base Unit Includes
5m-input cable
Order
• Arc gouging capability.
K14002-2
LINC 405-S
• Hot Start supporting excellent arc starting (SA).
K14002-1
LINC 405-SA
• Arc Force to prevent “freezing” the electrode in the
welding puddle (SA).
• Digital meters showing welding Amperage (SA).
• Easy to understand graphic control panels.
• Fan on demand (F.A.N.™) built-in reduces power and the
intake of dust and fumes.
• Ready to be moved. Equipped with wheels, pull bar and
two lifting hooks.
• Lift TIG DC capability (SA).
Product
Name
Product
Number
LINC 405-S
K14002-2
Input
Power
230/400/3/50-60
LINC 405-SA
K14002-1
Rated Output
Current/Voltage/
Duty Cycle
Fuse
size
400A/36V/35%
63A (230V)
15-400 A
240A/29V/100%
40A (400V)
Max. OCV: 78V
Output
Range
Dimensions
HxWxD
(mm)
Net
Weight
(kg)
640 x 580 x 700
126
Stick Welders
• Meet IEC974-1, ROHS and CE standards for safety and
reliability.
13
www.lincolnelectric.eu
Stick Welders
LINC
635-S & SA
Rugged with high output
The LINC 635 is an exceptionally rugged conventional stick
rectifier built to be used under harsh environmental conditions.
The unit is available in two versions, the basic LINC 635-S
ready to support stick welding with all rutile, basic and
cellulosic electrodes and the LINC 635-SA completed with all
sophisticated features.
• Rugged conventional welding rectifier with excellent arc
characteristics.
• Capable to weld Rutile, Basic and Cellulose electrodes
Processes
Stick, Lift TIG DC (-SA), Gouging
Output CC DC
Input
3 5060
PHASE
Hz
Base Unit Includes
5m-input cable
Order
• Arc gouging capability.
• Hot Start supporting excellent arc starting (SA).
K14038-2
LINC 635-S
K14038-1
LINC 635-SA
• Arc Force to prevent “freezing” the electrode in the
welding puddle (SA).
• Digital meters showing welding Amperage (SA).
• Easy to understand graphic control panels.
• Fan on demand (F.A.N.™) built-in reduces power and
the intake of dust and fumes.
• Ready to be moved. Equipped with wheels, pull bar
and two lifting hooks.
• Lift TIG DC capability (SA).
• Meet IEC974-1, ROHS and CE standards for safety
and reliability.
Stick Welders
Product
Name
Product
Number
LINC 635-S
K14038-2
Input
Power
670A/44V/35%
230/400/3/50-60
LINC 635-SA
Rated Output
Current/Voltage/
Duty Cycle
K14038-1
14
www.lincolnelectric.eu
500A/40V/60%
400A/36V/100%
Fuse
size
Output
Range
100A (230V)
15-670 A
63A (400V)
Max. OCV: 78V
Dimensions
HxWxD
(mm)
Net
Weight
(kg)
670 x 580 x 700
150
Stick Welders
R3R 600-I
Heavy duty stick welding and arc gouging
Processes
PHASE
Hz
3
Parts &
Labour
AN
R
CE PLUS P
N
IO
E
M
CT
Year warranty
R
O
3 5060
RF
Input
N ELEC
OL
IC
TR
Output CC DC
LIN
C
Stick, Gouging, TIG (optional)
PE
Look to the R3R 600-I power source from Lincoln Electric for
your heavy-duty stick welding needs. Whether you’re using
mild steel, low hydrogen, stainless steel or hardfacing
electrodes, the Idealarc R3R 600-I produces a smooth, quality
arc for consistent results day-in and day-out. 600A at
maximum output gives the R3R600-I an excellent arc gouging
behaviour. The R3R 600-I is also a proven DC TIG welder –
simply add TIG accessories and a cylinder of shielding gas.
O
T
Order
• Excellent arc characteristics for a wide range of electrode
types.
• Maximum output of 600 amps allows the use of
electrodes up to 6.3mm & Gouging.
K1381-2
R3R600-I
• Infinitely variable "Arc Force" and "Hot Start".
• Easy to operate—Calibrated current control knob makes
procedure setting simple and easy.
• Polarity switch, voltmeter and ammeter are standard.
• Rugged case design for portability and impact resistance.
• Input voltage compensation.
• Thermostatic overload protection.
Product
Name
Product
Number
Input
Power
R3R 600-I
K1381-2
230/380/440/3/50-60
Rated Output
Current/Voltage/
Duty Cycle
600A/44V/35%
375A/35V/100%
Fuse
size
103A
Output
Range
75-625A
Max. OCV: 64V
Dimensions
HxWxD
(mm)
Net
Weight
(kg))
700 x 565 x 840
209
Stick Welders
• Meet IEC974-1, ROHS and CE standards for safety and
reliability.
15
www.lincolnelectric.eu
Stick Welders
Invertec
V350-PRO
Design smart, Built tough
®
The Invertec® V350-PRO is the most powerful portable multiprocess inverter power source in its class. Smart operation
allows it to handle any stick, TIG, and MIG applications.
This machine is ready to connect with a wire feeder and
equipped with two digital meters showing Amps and voltage.
Continuous adjustable choke and Arc force are
provided as standard.
Processes
Hz
M
R
CE PLUS P
Base Unit Includes
• Superb welding with Basic, Rutile and Cellulosic
electrodes, MIG and Flux Cored.
3m-input cable
• Its plug and play intelligence allows it to automatically
adjust to your wire feeder instantly.
K1728-12
Order
V350-PRO
• Tough durable case with roll bars and skid for protected
transport.
• Bright, large digital meters.
• Control panel is simple in design and easy to operate
• Meet IEC974-1, ROHS and CE standards for safety and
reliability.
Stick Welders
Product
Name
V350-PRO
Product
Number
Input
Power
Rated Output
Current/Voltage/
Duty Cycle
350A/34V/60%-3ph
K1728-12 200/220/380/415/440/3/50-60 300A/32V/100%-3ph
320A/33V/60%-1ph
275A/31V/100%-1ph
16
www.lincolnelectric.eu
Output
Range
5-425A
Max OCV: 80V DC
Dimensions
HxWxD
(mm)
Net
Weight
(kg)
376 x 338 x 709
38
N
IO
CT
Parts &
Labour
AN
E
R
O
PHASE
3
Year warranty
RF
1 3 50
60
PE
Input
N ELEC
OL
IC
TR
CC
Output CV DC
LIN
C
Stick, TIG, MIG, Flux-Cored, Gouging
O
T
Stick Welders : options & accessories
ACCESSORY KITS
CABLE KITS (ground/electrode)
with ground cable & electrode holder (clamp)
Item n° :
KIT-140A-16-3M
KIT-140A-25-5M
KIT-200A-25-3M
KIT-200A-35-5M
KIT-250A-35-5M
KIT-300A-50-5M
KIT-400A-70-5M
(140A - 16mm2 - 3m)
(140A - 25mm2 - 5m)
(200A - 25mm2 - 3m)
(200A - 35mm2 - 5m)
(250A - 35mm2 - 3m)
(300A - 50mm2 - 5m)
(400A - 70mm2 - 5m)
GAS PRESSURE
REGULATOR
Accommodates CO2, argon or
argon-blended gas cylinders.
Includes a cylinder pressure gauge,
dual scale flow gauge and 1,3m
gas hose
Item n° : consult us
TIG TORCHES
CABLE KITS (ground)
Item n° :
GRD-400A-70-5M (400A - 70mm2 - 5m)
GRD-400A-70-10M (400A - 70mm2 - 10m)
GRD-400A-70-15M (400A - 70mm2 - 15m)
GRD-600A-95-10M (600A - 95mm2 - 10m)
REMOTE CONTROLS
1 potentiometer, 6 pins, 15m
Item n° : K10195-1-15M
2 potentiometers (fine adjustment), 6 pins, 15m
(for use with R3R600-I)
Item n° : K10124-1-15M
Extension cable
Item n° : K10398
LINC TORCH™ range
With the LINC TORCHTM range,
Lincoln Electric offers a complete
collection of TIG welding torches.
No matter what the application,
there will be a perfectly suitable
torch for the job.
LT 17G, standard torch head, manual
valve, 140A DC / 100A AC @ 35%
10-25 mm2 connector (V145S)
K10513-17-4VS LT17 GV, 4m
K10513-17-8VS LT17 GV, 8m
35-50 mm2 connector (V160S, V270S,
V405S)
K10513-17-4V
LT17 GV, 4m
K10513-17-8V
LT17 GV, 8m
UNDERCARRIAGES
4-wheeled undercarriage with gas cylinder
platform delivered as a kit, for use with V405
Item n° : W0200003
Stick Welders
2-wheeled cart, delivered as a kit, for use with
V160, V205, V270
Item n° : W0200002
17
www.lincolnelectric.eu
Lincoln® TIG Welders Give You the Power to Perform!
SM
• Precision Arc Control
• Code Quality Results
• Convenient High Value Features
KEY:
Warranty (years)
Variable AC freq.
FEATURES
Auto-reconnect
PROCESS
TIG Pulse
Voltage (V)
INPUT
230
2
Invertec® V160-T-2V
CC
DC
5-160
115/230
2
Invertec® V160-TP
CC
DC
5-160
230
•
•
2
Invertec V160-TP-2V
CC
DC
5-160
115/230
•
•
2
Invertec® V205-TP-2V
CC
DC
5-200
230/400
•
•
2
Invertec® V205-T AC/DC
CC
AC/DC
6-200
115/230
• • •
2
Invertec® V270-T
CC
DC
5-270
400
•
•
2
Invertec® V270-TP
CC
DC
5-270
400
•
•
2
Invertec® V270-TP-2V
CC
DC
5-270
230/400
•
•
2
Invertec® V405-TP
CC
DC
5-400
400
•
•
2
Invertec® V310-T AC/DC
CC
AC/DC
• • •
2
®
Excellent
Good
Optional
30-310
230/400
•
Meters
5-160
HF Pulse
DC
Gouging
CC
TIG HF
Invertec® V160-T
Lift TIG
Current
Range
(Amps)
Stick
Polarity
OUTPUT
Mode
3-Phase
Inverters
1-Phase
Inverters
MODEL
TIG Welding : Process & Selection Chart
TIG Process
Gas Tungsten Arc Welding
Water in (Cold)
Current conductor
TIG torch
Cup
Shielding gas in
Tungsten electrode
Arc
Welding rod
Parent material
Water out (Hot)
Shielding gas out
Shielding atmosphere
Solidified weld metal
In this welding process, the electric arc is generated between a non-consumable tungsten electrode and the work
piece to be welded. An inert gas atmosphere, usually argon, protects the weld pool. Welding can be done by simply
fusing of the parent material together, or with the addition of welding rod similar to the parent material. The rod is
allowed to melt in the electric arc and will fill and reinforce the weld joint.
Arc ignition is achieved by touching the work piece with the electrode and lifting it by a few millimetres (contact
ignition and lift ignition) or by using a high frequency voltage discharge, a gap of about 4 millimetres is maintained
from the tungsten electrode and the work piece, high frequency spark is generated, this makes the air gap
conductive, and allows the arc to be established without touching of the work piece with the tungsten electrode,
no tungsten contamination can occur (High Frequency ignition).
The following can be used:
- DC (continuous) current is used with most metals (steel / stainless steel).
- AC (alternative) current is ideal for welding aluminium and other materials containing surface refractory oxide.
Selection Chart for TIG Welding
Aluminium
TIG Welders
Steel / Stainless
19
www.lincolnelectric.eu
TIG Welders
Invertec V160-T&TP
®
Designed and engineered for durability
The Invertec® V160-T & T-Pulse TIG and Stick welders combine
a rugged industrial construction with excellent arc
characteristics. They are full function DC TIG inverters with
excellent arc control. Their built-in gas solenoid and choice of
High Frequency or Touch-Start TIG starting make them ideal
for a wide variety of DC TIG applications.
They can also weld stick with a variety of popular Lincoln stick
electrodes. Their portable rugged design and 230V 50/60Hz
operation make them ideal for both in shop or field use.
A unique feature of the V160-T Pulse is the variable high
frequency Pulse that allows the welder to adjust arc focus to
suit the applications.
Processes
K12017-1
Invertec® V160-T
230/1/50-60
• Advanced inverter technology for superior TIG
performance.
• Generator compatible ideal for site use.
• HF and Lift TIG ignition meeting all requirements.
• Full function user-friendly control panel layout for easy
setup of welding parameters.
• Fan on demand (F.A.N.™) built-in reduces power and the
intake of dust and fumes.
K12017-3
Invertec® V160-T - 2V
115/230/1/50-60
K12018-1
Invertec® V160-TP
230/1/50-60
K12018-3
Invertec® V160-TP - 2V
115/230/1/50-60
Stick, Lift TIG, TIG HF, TIG Pulse (V160-TP)
Output CC DC
Input
1 5060
PHASE
Hz
Base Unit Includes
2m-input cable, Carrying strap, Gas
connection kit.
Order
• Recessed controls and connections designed to eliminate
damage.
• High speed Pulse on the V160-T Pulse machine to adjust
the arc focus, reduce distortion and increase travel speed.
• Meet IEC974-1, ROHS and CE standards for safety and
reliability.
TIG Welders
Product
Name
Product
Number
Input
Power
V160-T
V160-TP
K12017-1
K12018-1
230/1/50-60
V160-T-2V
V160-TP-2V
K12017-3
K12018-3
115/230/1/50-60
20
www.lincolnelectric.eu
Rated Output
Current/Voltage
Duty Cycle
160A/26,4V/35%
130A/25,2V/100%
Fuse
Size
16A
32A / 16A
Output
Range
Dimensions
HxWxD
(mm)
Net
Weight
(kg)
5-160A
Max. OCV: 48V
320 x 200 x 430
10,5
TIG Welders
Invertec V205-TP-2V
®
Smart switching, full flexibility
The Invertec® V205-T PULSE is manufactured in a lightweight
but robust outer casing, making it portable and ideal for
operation, even in the most hazardous environments. The
smart switching 230/400V single phase and generator
compatibility of the V205-T PULSE allow it to be utilised
anywhere on sites and workshops. It features HF TIG ignition,
Lift TIG ignition, 2 or 4 step, variable down slope and postflow
control, a digital pre-set meter with a Hold function and builtin Variable Pulse.
Processes
Stick, Lift TIG, TIG HF, TIG Pulse
Output CC DC
Input
1 5060
PHASE
Hz
Base Unit Includes
2m-input cable, Carrying strap, Gas
connection kit.
• Excellent arc characteristics for Rutile, Basic and
Cellulosic electrodes up to 4.0mm.
Order
K12021-1
• Smart switching 230/400V single phase.
Invertec® V205-T - 2V
• Generator compatible, ideal for site use.
• HF and Lift TIG ignition.
• HIGH speed PULSE to adjust the arc focus, reduce
distortion and increase travel speed.
• Fan on demand (F.A.N.™) built-in reduces power and the
intake of dust and fumes.
Product
Name
Product
Number
Input
Power
V205-TP-2V
K12021-1
230/400/1/50-60
Rated Output
Current/Voltage/
Duty Cycle
200A/28V/35%
170A/26,8V/100%
Fuse
size
Output
Range
35/20A (slow)
5-200 A
Max. OCV: 48V
Dimensions
HxWxD
(mm)
Net
Weight
(kg)
385 x 215 x 480
18,1
TIG Welders
• Meet IEC974-1, ROHS and CE standards for safety and
reliability.
21
www.lincolnelectric.eu
TIG Welders
Invertec
V270-T & TP
Designed and engineered for durability
®
The Invertec® V270-T & V270-T PULSE are manufactured in a
lightweight but robust outer casing, making it portable and
ideal for operation, even in the most hazardous environments.
The flexibility and generator compatibility of the V270-T &
V270-T PULSE allows them to be utilised anywhere on sites
and workshops. Their features include HF TIG ignition, Lift TIG
ignition, 2 or 4 step, variable down slope and postflow control,
a digital pre-set meter with a Hold function and built-in
Variable Pulse.
• Excellent arc characteristics for a wide range of
applications.
Processes
Stick, Lift TIG, TIG HF, TIG Pulse
Output CC DC
Input
3 5060
PHASE
Hz
Base Unit Includes
2m-input cable, Carrying strap, Gas
connection kit.
Order
• Generator compatible, ideal for site use.
• HF and Lift TIG ignition.
• Full function user-friendly control panel layout.
K12023-1
Invertec® V270-T
400/3/50-60
K12024-1
Invertec® V270-TP
400/3/50-60
K12024-3
Invertec® V270-TP - 2V
230/400/3/50-60
• Available in dual version model, with auto-reconnect
between 230/400V.
• HIGH speed PULSE to adjust the arc focus, reduce
distortion and increase travel speed (TP version only).
• Fan on demand (F.A.N.™) built-in reduces power and
the intake of dust and fumes.
• Meet IEC974-1, ROHS and CE standards for safety and
reliability.
TIG Welders
Product
Name
Input
Power
Rated Output
Current/Voltage
Duty Cycle
Fuse
Size
400/3/50-60
270A/30,8V/35%
20A
Product
Number
V270-T
K12023-1
V270-TP
K12024-1
V270-TP-2V
K12024-3
200A/28V/100%
230/400/3/50-60
22
www.lincolnelectric.eu
Output
Range
5-270 A
Max. OCV: 48V
35 - 20A
Dimensions
HxWxD
(mm)
Net
Weight
(kg)
385 x 215 x 480
13,5
TIG Welders
Invertec V405-TP
®
Designed and engineered for durability
The Invertec® V405-T PULSE is manufactured in a lightweight
but robust outer casing, making it portable and ideal for
operation, even in the most hazardous environments. The
flexibility and generator compatibility of the V405-T PULSE
allows it to be utilised anywhere on sites and workshops. It
features include HF TIG ignition, Lift TIG ignition, 2 or 4 step,
variable down slope and post flow control, a digital pre-set
meter with a Hold Function and built-in Variable Pulse.
Processes
Stick, Lift TIG, TIG HF, TIG Pulse Gouging
Output CC DC
Input
3 5060
PHASE
Hz
Base Unit Includes
• Excellent arc characteristics for a wide range of
applications.
2m-input cable, Gas connection kit.
• Generator compatible, ideal for site use.
K12027-1
Order
Invertec® V405-TP
• HF and Lift TIG ignition.
• Full function user-friendly control panel layout.
• HIGH speed PULSE to adjust the arc focus, reduce
distortion and increase travel speed.
• Fan on demand (F.A.N.™) built-in reduces power and the
intake of dust and fumes.
Product
Name
Product
Number
Input
Power
V405-TP
K12027-1
400/3/50-60
Rated Output
Current/Voltage
Duty Cycle
400A/36V/35%
300A/32V/100%
Fuse
Size
Output
Range
30A
5-400 A
Max. OCV: 48V
Dimensions
HxWxD
(mm)
500 x 270 x 610
Net
Weight
(kg)
31
TIG Welders
• Meet IEC974-1, ROHS and CE standards for safety and
reliability.
23
www.lincolnelectric.eu
TIG Welders
Invertec V205-T AC/DC
®
Code quality AC/DC TIG welding
The Invertec® V205-T AC/DC is ideal for critical AC or DC TIG
welding applications. This full featured TIG welder is also
capable of stick welding. Variable AC frequency allows you to
focus the arc when precise arc control is required. The
115/230V auto-reconnect makes the V205-T AC/DC truly
flexible and the rugged, portable, lightweight design is ideal
for shop or field environments. It can be simply changed to a
water cooled unit by adding the Coolarc 20 Water Cooler.
Processes
Stick, TIG AC, TIG DC, TIG Pulse
Output CC
Input
AC
DC
1 5060
PHASE
Hz
Base Unit Includes
2m-input cable, Carrying strap, Gas
connection kit.
• Advanced inverter technology optimizes arc performance
in a lightweight package.
Order
K1855-2 Invertec® V205-T AC/DC
• AC or DC output for a wide variety of material types and
thicknesses.
• Three modes of operation DC TIG, AC TIG or Stick.
• Full-featured TIG controls.
• Auto-reconnects for 115/230V 50/60Hz input power.
• Line voltage compensation allows remote power from an
engine driven generator.
• Adjustable AC frequency allows you to focus the arc for
precise arc control.
• Fan on demand (F.A.N.™) built-in reduces power and the
intake of dust and fumes.
• Meet IEC974-1, ROHS and CE standards for safety and
reliability.
TIG Welders
Product
Name
Product
Number
Input
Power
Rated Output
Current/Voltage
Duty Cycle
Fuse
Size
Output
Range
Dimensions
HxWxD
(mm)
Net
Weight
(kg)
V205T
AC/DC
K1855-2
115/230/1/50-60
200A/18V/40%
170A/16,8V/60%
32A / 16A
6-200A
385 x 215 x 480
18
24
www.lincolnelectric.eu
TIG Welders
Invertec V310-T AC/DC
®
Perfect performance, digital dynamics
The Invertec® V310-T AC/DC is an industrial TIG welding
machine able to perform at a high output of 300A at 40% duty
cycle.
The machine is equipped with a unique colour-LCD user
interface, not only showing welding parameters but also the
effect on the arc.
Some of the standard features of this machine include the
variable frequency control, allowing the welder to adjust the
arc focus to suit the application. The adjustable cleaning and
penetration facility, a square wave AC form which can be set
to an alternative wave forms and adjustable Starting current. It
can be simply changed to a water cooled unit by adding the
Coolarc 35 Water Cooler
Processes
Stick, TIG AC, TIG DC, TIG Pulse
Output CC
Input
AC
DC
3 5060
PHASE
Hz
Base Unit Includes
2m-input cable, Gas connection kit.
Order
K2228-2 Invertec® V310-T AC/DC
• Digital inverter technology allowing 100% reproducible
results.
• Superb welding characteristics with TIG AC, TIG DC and
MMA processes.
• Unique colour-LCD user interface.
• Adjustable cleaning and penetration for perfect
aluminium welding
• Variable AC frequency for control of travel speed and
penetration
• Adjustable Hot or Soft start to produce a better weld bead
appearance at the start
• Digital display allows precise setting of welding
parameters
• Fan on demand (F.A.N.™) built-in reduces power and the
intake of dust and fumes.
Product
Name
Product
Number
Input
Power
Rated Output
Current/Voltage
Duty Cycle
Fuse
Size
Output
Range
Dimensions
HxWxD
(mm)
Net
Weight
(kg)
V310-T
AC/DC
K2228-2
230/400/3/50-60
310A/32V/40%
20A
30-310A
500 x 275 x 610
33
TIG Welders
• Meet IEC974-1, ROHS and CE standards for safety and
reliability.
25
www.lincolnelectric.eu
TIG Welding : options & accessories
ACCESSORY KITS
TIG TORCHES
CABLE KITS (ground/electrode)
with ground cable & electrode holder (clamp)
LINC TORCH™ range
With the LINC TORCHTM range, Lincoln
Electric offers a complete collection of
TIG welding torches. No matter what the
application, there will be a perfectly
suitable torch for the job.
Item n° :
KIT-140A-16-3M
KIT-140A-25-5M
KIT-200A-25-3M
KIT-200A-35-5M
KIT-250A-35-5M
KIT-300A-50-5M
KIT-400A-70-5M
(140A - 16mm2 - 3m)
(140A - 25mm2 - 5m)
(200A - 25mm2 - 3m)
(200A - 35mm2 - 5m)
(250A - 35mm2 - 3m)
(300A - 50mm2 - 5m)
(400A - 70mm2 - 5m)
CABLE KITS (ground)
Item n° :
GRD-200A-35-5M (200A - 35mm2 - 5m)
GRD-200A-35-10M (200A - 35mm2 - 10m)
GRD-300A-50-5M (300A - 50mm2 - 5m)
GRD-300A-50-10M (300A - 50mm2 - 10m)
GRD-400A-70-5M (400A - 70mm2 - 5m)
GRD-400A-70-10M (400A - 70mm2 - 10m)
GRD-400A-70-15M (400A - 70mm2 - 15m)
GRD-600A-95-10M (600A - 95mm2 - 10m)
REMOTE CONTROLS
1 potentiometer, 6 pins, 15m
Item n° : K10195-1-15M
Foot Amptrol, 6pins, 7,6m
Item n° : K870
UNDERCARRIAGES
2-wheeled cart, delivered as a kit, for use
with V160T, V205-TP, V270-TP
Item n° : W0200002
4-wheeled undercarriage with gas
cylinder platform delivered as a kit,
for use with V405-TP, V310-T AC/DC
Item n° : W0200003
AIR COOLED
LT 9G, small torch head,
110A DC / 180A AC @ 35%.
K10513-9-4
LT9 G, 4m
K10513-9-8
LT9 G, 8m
LT 17G, standard torch head,
140A DC / 100A AC @ 35%
K10513-17-4
LT17 G, 4m
K10513-17-8
LT17 G, 8m
LT 26G, standard torch head,
180A DC / 130A AC @ 35%
K10513-26-4
LT26 G, 4m
K10513-26-8
LT26 G, 8m
WATER COOLED
LT 20W, small torch head,
220A DC / 160A AC @ 100%
K10513-20-4
LT20 W, 4m
K10513-20-8
LT20 W, 8m
LT 18w, standard torch head,
320A DC / 230A AC @ 100%
K10513-18-4
LT18 W, 4m
K10513-18-8
LT18 W, 8m
WATER COOLERS
COOLARC 20 for use with V205/V270
Item n° : K1904-1
COOLARC 30 for use with V405
Item n° : K2168-1
COOLARC 35 for use with V310
Item n° : K2630-1
GAS PRESSURE
REGULATOR
TIG Welders
Accommodates CO2, argon or argon-blended
gas cylinders. Includes a cylinder pressure
gauge, dual scale flow gauge and 1,3m gas
hose
Item n° : consult us
26
www.lincolnelectric.eu
Coolant ACOROX (2x5l)
Item n° : K10420-1
– The Professional’s Choice!
SM
• For home, farm, autobody, maintenance or fabrication.
• Professional Drive System.
OUTPUT
FEATURES
WFS (m/min)
Warranty (years)
CV
DC
45-80
230
2
1.0-20
3
Handy MIG
CV
DC
45-80
230
2
1.0-20
3
Powertec 161
CV
DC
30-150
230
2
1.0-17
3
Power MIG 180C
CV
DC
30-170
230
2
1.0-20
3
Powertec 200C
CV
DC
25-200
230/400
10
2
1.0-20
3
Powertec 250C
CV
DC
25-250 230/400
20
2
1.0-20
3
Powertec 300C
CV
DC
25-300 230/400
20 2/4 1.0-20
3
Powertec 280C Pro
CV
DC
25-280 230/400
30
4
1.0-20
3
Powertec 350C Pro
CV
DC
25-350 230/400
30
4
1.0-20
3
Powertec 420C Pro
CV
DC
25-420 230/400
30
4
1.0-20
3
®
KEY:
Excellent
Good
Optional
MIG
Nb of steps
Handy Core
Voltage (V)
Flux-Cored
Current
Range
(Amps)
Drive rolls
PROCESS
Polarity
INPUT
Mode
3-Phase
wire feeder/welders
1-Phase
wire feeder/welders
MODEL
MIG Welding
MIG Process
Gas shielded MIG welding
Gun
Welding direction
Nozzle
Contact tip
Shielding gas
Solid wire or
Flux-cored wire
Arc
Weld pool
Shielding atmosphere
Solidified weld metal
Parent material
The MIG/MAG welding process (or GMAW - Gas Metal Arc Welding) is when an electric Arc is created
between a continuous consumable wire and the work piece to be welded, protected within a gas
atmosphere. This atmosphere can be either inert (Argon) or active (CO2 or mixture of Argon and CO2).
The wire is continuously fed through a gun to the weld pool by a wire feeder. Either Solid Wire (GMAW)
or Cored Wire (FCAW-GS - flux-cored arc welding, gas shielding) can be used.
Self shielded Flux-Cored welding
Gun
Gun tube insulator / thread
protection
Arc
Weld pool
Contact tip
Flux-cored wire
Shielding atmosphere
Molten slag Solidified slag
Solidified weld metal
MIG Welders
Parent material
Innershield welding is an Arc welding process in which welding heat is created from an arc between a
continuous flux cored wire and the work piece. The flux provides gas shielding for the arc and a slag
covering of the weld deposit.
28
28
www.lincolnelectric.eu
28
MIG Welders Compact
Handy Core & Handy MIG
Superbly simple, powerfully portable
Processes
Flux-Cored (Innershield®), MIG
Hz
M
N
CT
Parts &
Labour
AN
E
O
PHASE
3
Year warranty
R
IO
LIN
C
1 5060
RF
Input
N ELEC
OL
IC
TR
Output CV DC
PE
These compact, portable and lightweight wire feed welders
plug into a 230V, 16 amp outlet and highly are user
friendly.These machines are ideally suited to the light
maintenance and repair such as for the small garage worker
and jobs around the Farm.
4 voltage settings and continuous wire feed speed
adjustment allow you to weld light gauge mild steel. It's easy
to get started since practically everything you'll need to weld
is included – gun and cable assembly, work cable & clamp,
spool of cored wire (+ solid wire with Handy MIG), contact tips
and handshield with filter plate and lens. But that's not all – a
chipping hammer/brush so you can use your Handy CORE and
Handy MIG to weld straight away.
R
CE PLUS P
O
T
Base Unit Includes
• Handy Core
MIG gun, drive rolls, 0,5kg Innershield
wire coil, kit of welding accessories.
• Handy MIG
MIG gun, drive rolls, 0,5kg Innershield
wire coil, 0,5kg solid wire coil, kit of
welding accessories.
• Suitable for the welding of most thin sheet steel
applications.
Order
K14001-1
Handy CORE
• Connects to 230V, 16 amp outlet.
K14000-1
Handy MIG
• Safe operation - no electrical current until trigger is
pressed.
• Compact, portable, lightweight and easy to use.
• Ideal for general light maintenance projects.
• Continuous wire feed speed adjustment and four
selectable voltage steps for precise control.
• Fan-cooled for long life expectancy.
• Supplied ready to weld.
Product
Name
Product
Number
Input Power
Dimensions
Rated Output
Current/Voltage/Duty Cycle
Fuse
Size
230/1/50/60
70A/17,5V/20%
16A
Handy CORE K14001-1
Handy MIG
Output Range
HxWxD
(mm)
Net Weight
(kg)
345 x 220 x 455
16
45-80 A
K14000-1
1.3 - 17.7 m/min
Max. OCV: 29
MIG Welders
• Meet IEC974-1, ROHS and CE standards for safety and
reliability.
29
www.lincolnelectric.eu
MIG Welders Compact
Power Mig 180C
®
Premium 230V compact welder
K2671-1
Hz
R
CE PLUS P
Order
K2671-1 Power MIG® 180C
Input Power
Output
Range
230/1/50-60
130A/20V/30%
16A
30-180A
1,3-12,7m/min
Max. OCV: 34V
Dimensions
HxWxD
(mm)
Net
Weight
(kg)
357 x 258 x 472
30
N
CT
Parts &
Labour
AN
IO
LIN
C
M
O
Gun, Input cable, Guide tubes and drive
roll (0.6mm-0.9mm), wire spool 0,6mm
0,9 Innershield® NR-211-MP self-shielded
flux-cored wire, work clamp and cable
Fuse
Size
www.lincolnelectric.eu
PHASE
3
Year warranty
R
Base Unit Includes
Rated Output
Current/Voltage/
Duty Cycle
30
1 5060
E
Input
N ELEC
OL
IC
TR
®
Power MIG 180C
Product
Number
Output CV DC
O
MIG Welders
Product
Name
MIG, Flux-Cored (Innershield®)
RF
• Designed for 0.6-0.8mm solid MIG wire and 0.9mm fluxcored wire Innershield®.
• For welding 0.6-8mm mild steel plate, stainless steel and
1mm aluminium wire.
• Connects to 230V, 16 amp outlet.
• Stepless control voltage for precise adjustments.
• Built-in “burnback” function insures proper wire stickout
after each weld with no sticking in the weld puddle.
• Large, easy-to-set knobs provide voltage control and full
range continuous wire feed speed control.
• Meet IEC974-1, ROHS and CE standards for safety and
reliability.
Processes
PE
Whether you are a farmer or a fabricator, an autobody shop or
a backyard mechanic, the Power MIG® 180C helps you get the
job done! It is a portable wire welder designed for use with
industrial 230 volt input power, so you can weld on thicker
material—up to 4,8mm with MIG welding and 12.7mm with
gas-less flux-cored welding.
Lincoln® Diamond Core Technology™ and the rugged
industrial drive system will make it easy to get great results
on steel, stainless or aluminum. Compare performance,
features and price. . . you will settle on Power MIG®.
T
MIG Welders Compact
Powertec 161C
The Professional’s Choice
Processes
MIG, Flux-Cored (Innershield®)
Hz
M
N
CT
Parts &
Labour
AN
E
O
PHASE
3
Year warranty
R
IO
LIN
C
1 5060
RF
Input
N ELEC
OL
IC
TR
Output CV DC
PE
The POWERTEC 161C is a completed semi-automatic constant
voltage DC arc welding machine. It is ideally suited to weld
thin sheet metal and for repair and maintenance works. It's
perfect tool for small workshop, car body repair or for farm.
This compact can be easy movable. You need only plug the
welder into 230V, 16 amp outlets.
It is recommended for both Innershield gasless flux cored arc
welding and MIG/MAG applications, including stainless steel.
The Powertec 161C is designed to feed wire from 0,6 mm to
1,1mm (steel, stainless steel and flux-cored) on K300 and
D200 spools.
R
CE PLUS P
O
T
Order
K14040-1 Powertec 161C
Product
Name
Powertec 161C
Product
Number
K14040-1
Input Power
Rated Output
Current/Voltage/
Duty Cycle
Fuse
Size
Output
Range
230/1/50-60
150A/21,5V/20%
16A
30-150A
1,0-17m/min
Max. OCV: 37V
Dimensions
HxWxD
(mm)
Net
Weight
(kg)
615 x 390 x 825
53
MIG Welders
• Designed for 0.6-0.8mm solid MIG wire and 0.9-1.1mm
flux-cored wire.
• Connects to 230V, 16 amp outlet.
• Burn-back and spot welding functions.
• Ideal for welding of thin sheet metal application.
• Easy to change polarity.
• Professional wire feeding system.
• Equipped with gun, ground cable and adaptor for D200
spool.
• Meet IEC974-1, -10 , ROHS and CE standards for safety
and reliability.
31
www.lincolnelectric.eu
MIG Welders Compact
Powertec 200C, 250C, 300C
Powerful compact excellent economics
Processes
MIG, Flux-Cored
Order
K14003-1 Powertec 200C
K14004-1 Powertec 250C
K14005-1 Powertec 300C
K14005-2 Powertec 300C 4-roll
• Excellent drive system with large drive roll.
• Electronic feedback system on the wire drive will
guarantee consistent wire feed speed.
• Equipped with large diameter wheels, push/pull bar
and lifting eyes for full maneuverability.
• Available in 4-roll version (PT300C only).
• Meet IEC974-1, ROHS and CE standards for safety and
reliability.
MIG Welders
Rated Output
Current/Voltage/
Duty Cycle
Fuse
size
Output
Range
K14003-1
200A/24V/35%
150A/21,5V/60%
25A / 16A
25-200A
Powertec 250C
K14004-1
250A/26,5V/35%
190A/23,5V/60%
32A / 16A
25-250A
Powertec 300C
K14005-1 &-2
300A/29V/35%
225A/25,2V/60%
40A / 25A
30-300A
Powertec 200C
230/400/3/50-60
32
32
www.lincolnelectric.eu
O
4m-primary cable, Work clamp and cable
assembly, Drive rolls, Gas hose
• Voltage selectors with multiple steps for precise
adjustment.
Input
Power
R
CE PLUS P
Base Unit Includes
• Products developed with a focus on applications.
Product
Number
Parts &
Labour
AN
E
O
M
Dimensions
HxWxD
(mm)
Net
Weight
(kg)
84
815 x 460 x 925
94
96
N
IO
CT
Year warranty
R
Hz
• Excellent starting performance.
Product
Name
3
IC
TR
3 5060
PHASE
N ELEC
OL
RF
Input
LIN
C
Output CV DC
PE
The design of the Powertec 200, 250 and 300C was driven by
the need to provide our customers with a range of machines
offering a variety of welding outputs.
The Powertec range begins with the 200C, which is the ideal
machine for the welding of thin sheet metal applications. With
excellent arc and starting characteristics this machine allows
you to complete your welding project efficiently, quickly and
professionally with minimal spatter levels. The Powertec 250C
is a more powerful version, still offering the facilities to weld
thin material but also the extra power required for light
construction work. The Powertec 300C has been built as the
true multi-purpose model, ideal for both thin sheet
applications and light to medium construction work. The
Powertec 300C will operate in both Short Arc welding and Full
Spray modes with a 1.0mm wire. The Powertec 300C is also
available in 4-roll version.
T
MIG Welders Compact
Powertec 280C, 350C, 420C PRO
Premium arc, synergic style
The Powertec Pro's are superior welders in all respects. Each
of these machines produce an excellent Arc and very low
spatter levels with both Argon mix and 100% Co2 shielding
gas. The extensive list of features on all Powertec Pro's
includes 2/4-step run-in, wire inch and gas purge. As standard
within the range, two clear digital meters are provided to
display welding Voltage and Amperes. The Powertec pro's are
designed to support the welder at all levels. With synergic
control adjusting the wire feed speed automatically, the welder
can simply select the welding voltage and go. All three
machines are provided with a powerful, rugged four-roll drive
system.
Processes
MIG, Flux-Cored
Hz
N
CT
Parts &
Labour
AN
E
M
IO
LIN
C
R
O
PHASE
3
Year warranty
RF
3 5060
PE
Input
N ELEC
OL
IC
TR
Output CV DC
R
CE PLUS P
O
T
Base Unit Includes
4m-primary cable, Work clamp and cable
assembly, Drive roll, Gas hose
Order
• Products developed with a focus on applications.
K14013-1
Powertec 280C PRO
K14014-1
Powertec 350C PRO
K14015-1A Powertec 420C PRO
Air cooled
• Superb Arc behaviour with Argon Mix and 100% Co2.
K14015-1W Powertec 420C PRO
Water cooled
• Excellent drive system with large drive roll and powerful
motor.
• Electronic feedback system on the wire drive will
guarantee consistent wire feed speed.
• Voltage selectors with multiple steps for precise
adjustment.
• Synergic control to support easy control by the
welder.
• Bright digital Voltage and Amperes meter.
• Completed with an extensive set of features.
• Large diameter wheels, push/pull bar and lifting
eyes for full maneuverability.
• Toolbox for storing parts and tooling.
Product
Name
Product
Number
Powertec 280C PRO
K14013-1
Powertec 350C PRO
K14014-1
Powertec 420C PRO Air
K14015-1A
Powertec 420C PRO water K14015-1W
Input
Power
230/400/3/50-60
Rated Output
Current/Voltage/
Duty Cycle
280A/28V/40%
230A/25,5V/60%
Fuse
size
Output
Range
Dimensions
HxWxD
(mm)
Net
Weight
(kg)
32A / 20A
30-280A
910 x 565 x 1030
142
350A/31,5V/40%
285A/28,2V/60%
40A / 25A
30-350A
910 x 565 x 1030
147
420A/35V/40%
345A/31,3V/60%
63A / 32A
30-420A
910 x 565 x 1030
157
910 x 700 x 1030
183
MIG Welders
• Meet IEC974-1, ROHS and CE standards for safety and
reliability.
33
33
www.lincolnelectric.eu
Powertec 300S
CV
DC
30-300
230/400
20
3
Powertec 360S
CV
DC
30-360
230/400
30
3
Powertec 420S
CV
DC
30-420
230/400
30
3
Powertec 500S
CV
DC
30-500
230/400
30
3
CV 420
CV
DC
30-420
230/400
30
3
CV 505
CV
DC
40-500
230/400
30
3
KEY:
Excellent
Good
Optional
MIG
Voltage (V)
Flux-Cored
Current
Range
(Amps)
Warranty (years)
PROCESS FEATURES
Nb of steps
INPUT
Polarity
MIG Welders
34
OUTPUT
Mode
MODEL
MIG Welders Packages
Powertec 300S / LF-22
Powerful potential, Technical triumph
3
Input
• Products developed with a focus on applications.
• LF-22 wire feeder 2-roll air cooled on
undercarriage, 0,8-1,0mm drive roll.
O
PHASE
R
M
Hz
Parts &
Labour
AN
R
CE PLUS P
N
IO
E
RF
It is mounted on a built-in, wheeled undercarriage, tow bar
and caster rolls, with a platform for the gas cylinder. .
CT
Year warranty
PE
3 5060
N ELEC
OL
IC
TR
Output CV DC
LIN
C
Processes
MIG, Flux-Cored
Operating from a three phase supply, the POWERTEC 300S is
a constant DC power source rated at 300 amps and 35% duty
cycle. The POWERTEC 300S power source and LF-22 wire
feeder package is ideal for Semi-automatic MIG/MAG welding
of steel, stainless steel and aluminium.
O
T
Recommended package Includes
• Superb Arc behaviour with Argon Mix.
• Powertec 300S power source on
undercarriage, Input cable, Work clamp
and cable assembly.
• 5m-Interconnection cable, MIG gun and
gas regulator.
• Electronic feedback system on the wire drive will
guarantee consistent wire feed speed.
• Voltage selectors with multiple steps for precise
adjustment.
• Synergic control to support easy control by the welder.
• Bright digital Voltage and Amperes meter.
• Completed with an extensive set of features.
• Large diameter wheels, push/pull bar and lifting eyes for
full maneuverability.
Product
Name
Product
Number
Input
Power
POWERTEC
300S
K14020-1
230/400/3/50-60
Rated Output
Current/Voltage/
Duty Cycle
300A/29V/35%
225A/25,2V/60%
Fuse
size
Output
Range
Dimensions
HxWxD
(mm)
Net
Weight
(kg)
40A / 25A
30-300A
790 x 460 x 925
96
Wire Size Range
(mm)
Solid
Cored
Dimensions
HxWxD
(mm)
Net
Weight
(kg)
440 x 270 x 636
16
Product
Name
Product
Number
Input Power
Wire Feed
Speed Range
(m/min)
LF-22 - air
K14024-1
34-44 VAC
1 - 20
0,8 - 1,6
1,0 - 1,6
MIG Welders
• Trigger mode for 2/4-step.
• Fully featured : Gas purge, cold feed, burnback, spot
welding.
• Meet IEC974-1, ROHS and CE standards for safety and
reliability.
35
35
www.lincolnelectric.eu
MIG Welders Packages
Powertec 360S / LF-24
Powerful potential, Technical triumph
Operating from a three phase supply, the POWERTEC 360S is
a constant DC power source rated at 350 amps and 40%
duty cycle. The POWERTEC 360S power source and LF-24
wire feeder package is ideal for industrial semi-automatic
MIG/MAG welding of steel, stainless steel and aluminium and
for gas shielded flux cored welding.
The POWERTEC 360S is equipped with a built-in wheeled
undercarriage, tow bar, 5m power cable and a 3m work lead
with clamp.
This package is available in two versions : air or water cooled.
Processes
• Products developed with a focus on applications.
• Superb Arc behaviour with Argon Mix and 100% Co2.
• Electronic feedback system on the wire drive will
guarantee consistent wire feed speed.
• Voltage selectors with multiple steps for precise
adjustment.
• Two choke tabs to support superb Arc behaviour
• Fan on demand (F.A.N.™)
• Synergic control to support easy control by the welder.
• Bright digital Voltage and Amperes meter.
• Completed with an extensive set of features.
• Large diameter wheels, push/pull bar and lifting eyes.
• Powertec 360S power source on
undercarriage, Coolarc 25, Input cable,
Work clamp and cable assembly
Hz
M
R
CE PLUS P
Recommended package includes
• LF-24 wire feeder 4-roll, 1,0-1,2mm
drive roll
• 5m-Interconnection cable, MIG gun and
gas regulator.
• Trigger mode for 2/4-step.
• Fully featured : Gas purge, cold feed, burnback, spot
welding.
• Meet IEC974-1, ROHS and CE standards for safety and
reliability.
Product
Name
PT360S air
Product
Number
K14021-1A
Input
Power
230/400/3/50/60
PT360S water K14021-1W
MIG Welders
Product
Name
LF-24 air/water
LF-24 PRO air/water
Rated Output
Current/Voltage/
Duty Cycle
350A/31,5V/40%
Fuse
size
Output
Range
40A / 25 A
30-350A
285A/28,2V/60%
Product
Number
K14025-1W
K14026-1W
36
www.lincolnelectric.eu
Input Power
Wire Feed
Speed Range
(m/min)
Solid
Wire Size Range
(mm)
Cored
34-44 VAC
1 - 20
0,8 - 1,6
1,0 - 1,6
Dimensions
HxWxD
(mm)
870 x 565 x 1030
Net
Weight
(kg)
145
870 x 700 x 1030
170
Dimensions
HxWxD
(mm)
Net
Weight
(kg)
440 x 270 x 636
17
N
IO
CT
Parts &
Labour
AN
E
R
O
PHASE
3
Year warranty
RF
3 5060
PE
Input
N ELEC
OL
IC
TR
Output CV DC
LIN
C
MIG, Flux-Cored
O
T
MIG Welders Packages
Powertec 420S / LF-24 PRO
Powerful potential, Technical triumph
Operating from a three phase supply, the POWERTEC 420S is
a constant DC power source rated at 420 amps and 40% duty
cycle. The POWERTEC 420S power source and LF-24 PRO wire
feeder package is ideal for heavy duty semi-automatic
MIG/MAG welding of steel, stainless steel and aluminium and
for gas shielded flux cored welding.
The POWERTEC 420S is equipped with a built-in wheeled
undercarriage, tow bar, 5m power cable and a 3m work lead
with clamp.
This package is available in two versions : air or water cooled.
Processes
• Products developed with a focus on applications.
• Superb Arc behaviour with Argon Mix and 100% Co2.
• Electronic feedback system on the wire drive will
guarantee consistent wire feed speed.
• Voltage selectors with multiple steps for precise
adjustment.
• Two choke tabs to support superb Arc behaviour
• Fan on demand (F.A.N.™)
• Synergic control to support easy control by the welder.
• Bright digital Voltage and Amperes meter.
• Completed with an extensive set of features.
• Large diameter wheels, push/pull bar and lifting eyes.
• Powertec 420S power source on
undercarriage, Coolarc 25, Input cable,
Work clamp and cable assembly
M
Hz
R
CE PLUS P
N
IO
CT
Parts &
Labour
AN
E
R
O
PHASE
3
Year warranty
RF
3 5060
PE
Input
N ELEC
OL
IC
TR
Output CV DC
LIN
C
MIG, Flux-Cored
O
T
Recommended package includes
• LF-24PRO wire feeder 4-roll, 1,0-1,2mm
drive roll
• 5m-Interconnection cable, MIG gun and
gas regulator.
• Trigger mode for 2/4-step.
Product
Name
PT420S air
Product
Number
K14022-1A
Input
Power
230/400/3/50/60
PT420S water K14022-1W
Product
Name
LF-24 air/water
LF-24 PRO air/water
Rated Output
Current/Voltage/
Duty Cycle
420A/35V/40%
Fuse
size
Output
Range
63A / 32 A
30-420A
345A/31,3V/60%
Product
Number
K14025-1W
K14026-1W
Input Power
Wire Feed
Speed Range
(m/min)
Solid
Wire Size Range
(mm)
Cored
34-44 VAC
1 - 20
0,8 - 1,6
1,0 - 1,6
Dimensions
HxWxD
(mm)
870 x 565 x 1030
Net
Weight
(kg)
155
870 x 700 x 1030
180
Dimensions
HxWxD
(mm)
Net
Weight
(kg)
440 x 270 x 636
17
MIG Welders
• Fully featured : Gas purge, cold feed, burnback, run in
• Meet IEC974-1, ROHS and CE standards for safety and
reliability.
37
37
www.lincolnelectric.eu
MIG Welders Packages
Powertec 500S / LF-24 PRO
Powerful potential, Technical triumph
Operating from a three phase supply, the POWERTEC 500S is
a constant DC power source rated at 500 amps and 40% duty
cycle. The POWERTEC 500S power source and LF-24PRO wire
feeder package is ideal for heavy duty semi-automatic
MIG/MAG welding of steel, stainless steel and aluminium and
for gas shielded flux cored welding.
The POWERTEC 500S is equipped with a built-in wheeled
undercarriage, tow bar, 5m power cable and a 3m work lead
with clamp.
This package is available in two versions : air or water cooled.
Processes
• Products developed with a focus on applications.
• Superb Arc behaviour with Argon Mix and 100% Co2.
• Electronic feedback system on the wire drive will
guarantee consistent wire feed speed.
• Voltage selectors with multiple steps for precise
adjustment.
• Two choke tabs to support superb Arc behaviour
• Fan on demand (F.A.N.™)
• Synergic control to support easy control by the welder.
• Bright digital Voltage and Amperes meter.
• Completed with an extensive set of features.
• Large diameter wheels, push/pull bar and lifting eyes.
• Powertec 500S power source on
undercarriage, Cooler 25, Input cable,
Work clamp and cable assembly
Hz
M
R
CE PLUS P
• 5m-Interconnection cable, MIG gun and
gas regulator.
• Meets IEC974-1 and CE standards.
Input
Power
230/400/3/50/60
PT500S water K14023-1W
MIG Welders
Product
Name
LF-24 air/water
LF-24 PRO air/water
Rated Output
Current/Voltage/
Duty Cycle
500A/39V/50%
Fuse
size
Output
Range
63A /40 A
30-500A
400A/34V/60%
Product
Number
K14025-1W
K14026-1W
38
www.lincolnelectric.eu
T
• LF-24PRO wire feeder 4-roll, 1,0-1,2mm
drive roll
• Fully featured : Gas purge, cold feed, burnback, run in
Product
Number
K14023-1A
O
Recommended package includes
• Trigger mode for 2/4-step.
Product
Name
PT500S air
Input Power
Wire Feed
Speed Range
(m/min)
Solid
Wire Size Range
(mm)
Cored
34-44 VAC
1 - 20
0,8 - 1,6
1,0 - 1,6
Dimensions
HxWxD
(mm)
870 x 565 x 1030
Net
Weight
(kg)
165
870 x 700 x 1030
190
Dimensions
HxWxD
(mm)
Net
Weight
(kg)
440 x 270 x 636
17
N
IO
CT
Parts &
Labour
AN
E
R
O
PHASE
3
Year warranty
RF
3 5060
PE
Input
N ELEC
OL
IC
TR
Output CV DC
LIN
C
MIG, Flux-Cored
MIG Welders Packages
V350-PRO / LF-37 or LF-38
Design smart, Built tough
The Invertec V350-PRO is the most powerful portable inverter
power source in its class. Smart operation allows it to handle
any stick, TIG, and MIG applications.
This CE model has full Amphenol connections and remote
control. Its plug-and-play intelligence allows it to
automatically adjust to your wire feeder instantly.
Included in the package is the LF-37 or LF-38 portable
semi-automatic wire feeder providing MIG and Flux Cored
support. The LF-37 features presetting, 2/4 steps, crater, and
hot/soft start, ideal for on site applications. The LF-38 adds
synergic programs and memory.
Processes
MIG, Flux-Cored, Innershield, Stick,
Gouging
Hz
M
R
CE PLUS P
N
CT
Parts &
Labour
AN
E
O
R
IO
LIN
C
RF
PHASE
3
Year warranty
PE
1 3 50
60
Input
N ELEC
OL
IC
TR
CC
Output CV DC
O
T
Recommended Packages Include
• LF-37 or LF-38 wire feeder, 1,0-1,2mm
drive roll.
• V350-PRO Power Source, 3m-input
cable.
• Excellent welding behaviour on CV MIG and Stick Welding.
• 5m-Interconnection cable, MIG gun and
gas regulator.
• Continuous control choke
• Tough durable case with roll bars and skid
• Bright, large digital meters.
• Control panel is simple in design and easy to operate
• Its plug and play intelligence allows it to automatically
adjust to your wire feeder instantly.
• Synergic capability and memory (with LF-38)
• Digital display for Wire feed speed and Voltage
• Adjustable Pre and Post flow.
Product
Name
Product
Number
Input
Power
V350-PRO
K1728-12
200/220/380/415/440V
Product
Name
Product
Number
LF-37
LF-38
K10406
K10407
Rated Output
Current/Voltage/
Duty Cycle
350A/34V/60%-3ph
300A/32V/100%-3ph
320A/33V/60%-1ph
275A/31V/100%-1ph
Output
Range
Dimensions
HxWxD
(mm)
Net
Weight
(kg)
5-425A
Max OCV: 80V DC
376 x 338 x 709
38
Input Power
Wire Feed
Speed Range
(m/min)
Solid
Wire Size Range
(mm)
Cored
42 VAC
1,5 - 20
0,8 - 1,6
1,0 - 1,6
Dimensions
HxWxD
(mm)
Net
Weight
(kg)
753 x 470 x 295
16
MIG Welders
• Perfect feeding
• Meet IEC974-1, ROHS and CE standards for safety and
reliability.
39
39
www.lincolnelectric.eu
MIG Welders Packages
CV-420 & CV505 / LF-33
High output reliable workhorses
The Idealarc CV420 and CV505 are industrial power sources
for heavy-duty applications. Both power sources are designed
to operate in heavy environmental conditions. This can be
shipyards or offshore yards outside. Therefore the machines
are truly meeting IP23 allowing operation in any adverse
conditions. Also, all the sensitive components are enclosed in
a compartment free from dust and separated from the airflow
needed to cool the machine. With the LF-33 wire feeder, we
focussed on ruggedness, dimensions and ease of use. The
result is an incredibly rugged, protective casing with the
primary controls on the outside. The secondary controls are
securely enclosed within the protective casing close to the
wire drive. The feeders come as standard with an
undercarriage, for use under tough industrial conditions.
Processes
• Two reliable workhorses with a high duty cycle to support
your application
• Potted and Encapsulated Printed Circuit Board controls in
separate dust free compartment.
• Water and Air cooled versions available.
• Superb Arc behaviour with Argon Mix and 100%Co2.
• Continuous control of wire feed Speed and voltage
• Trigger mode for 2/4-step.
• Well featured; the LF 33 features 2/4 stoke, Burnback, gas
purge, cold inch, run in.
• Bright digital Voltage and Amperes meter.
• Meet IEC974-1, ROHS and CE standards for safety and
reliability.
• 5m-Interconnection cable, MIG gun
and gas regulator.
MIG Welders
CV505 air
K14029-1A
CV505 water
K14029-1W
LF-33 air/water
230/400/3/50/60
420A/35V/60%
32A
230/400/3/50/60
500A/40V/60%
48A
385A/36,5V/100%
R
CE PLUS P
Output
Range
Dimensions
HxWxD
(mm)
30-420A
870 x 565 x 1030
134
Max. OCV: 43V
870 x 700 x 1030
155
40-500A
870 x 565 x 1030
149
Max. OCV: 43 V
870 x 700 x 1030
170
Wire Size Range
(mm)
Cored
Dimensions
HxWxD
(mm)
Net
Weight
(kg)
440 x 270 x 636
17
Wire Feed
Speed Range
(m/min)
Solid
K14030-1W
34-44 VAC
1 - 20
0,8 - 1,6
1,0 - 1,6
N
LIN
C
Net
Weight
(kg)
IO
CT
E
Parts &
Labour
AN
O
T
• CV420 or CV505 power source on
undercarriage, Input cable, Work clamp
and cable assembly (Cooler 25 for
water cooled version).
Input Power
www.lincolnelectric.eu
Hz
M
• LF-33 wire feeder 4-roll, 1,0-1,2mm
drive roll.
Product
Number
40
Year warranty
R
Recommended packages include
Fuse
size
320A/30V/100%
PHASE
3
IC
TR
K14028-1A
K14028-1W
3 5060
O
CV420 air
CV420 water
Product
Name
Rated Output
Current/Voltage/
Duty Cycle
Input
Power
Input
N ELEC
OL
RF
Product
Number
Output CV DC
PE
Product
Name
MIG, Flux-Cored
MIG Welders
DC-400
DC multi-process welding power source
Processes
Stick, TIG, MIG, Flux-Cored, Innershield,
Submerged Arc, Gouging
Hz
M
R
CE PLUS P
N
CT
Parts &
Labour
AN
E
O
PHASE
3
Year warranty
R
IO
LIN
C
3 5060
RF
Input
N ELEC
OL
IC
TR
CC
Output CV DC
PE
The DC-400 CE is one of the world’s most recognised multiprocess welding machines. It has withstood the test of time,
even in the harshest environments.
The DC-400 CE provides outstanding arc characteristics on
both constant current and constant voltage processes. This
provides great welding versatility with Stick, MIG and
Innershield in a single power source.
O
T
Recommended Wire Feeders
• Standard ammeter and voltmetre.
LF-33, LF-37, LF-38, LN-25, LN-23P
NA-3, NA-5, NA-5R
• Solid state circuitry for long life and repetitive welding
applications.
• Arc control adjustment changes pinch effect of the arc to
control spatter, fluidity, and bead shape in the MIG/FluxCored mode.
Order
K1309-17
DC-400
• Mode switch for selecting desired output characteristics.
• Outstanding welding performance with a single range full
output control potentiometer.
• Low profile case allows stacking machines up to three high
to conserve floor space.
• Meet IEC974-1, ROHS and CE standards for safety and
reliability.
Product
Name
DC-400
Product
Number
Input
Power
K1309-17
230/400/3/50-60
Rated Output
Current/Voltage/
Duty Cycle
500A/40V/50%
450A/38V/60%
400A/36V/100%
Fuse
size
Output
Range
77/45A
60-500A
12-42V
12-42V
Dimensions
HxWxD
mm
Net
Weight
kg
782 x 566 x 840
215
MIG Welders
shown with multi-process
switch option
41
41
www.lincolnelectric.eu
MIG Welding : options & accessories
INTERCONNECTION CABLES
MIG TORCHES
Fast-mate (x2), gas hose, protection,
(2,5 ; 5 ; 10 ; 15 ; 20 ; 25 & 30m)
Item n° :
K10347-PG-xM (air cooled)
K10347-PGW-xM (water cooled)
LINC GUN™ range
As standard these guns come with an
ergonomic grip, springs on both sides of the
cable, retractable pins and a "rotating ball
joint" at the end of the gun grip
GAS PRESSURE
REGULATOR
Accommodates CO2, argon or argonblended gas cylinders. Includes a
cylinder pressure gauge, dual scale flow
gauge and 1,3m gas hose
Item n° : consult us
WATER COOLERS
COOLARC 25
Item n° : K14037-1
COOLARC 40 for use with V350PRO & DC400
Item n° : K2187-2
Coolant ACOROX (2x5l)
Item n° : K10420-1
MIG Welders
42
www.lincolnelectric.eu
AIR COOLED
LG 140D, 140A @ 60% (Handy MIG/Handy Core)
K10413-14D
2.5m
LG 150GD, 150A @ 60%, connecteur droit
K10413-15GD
3m
LG 150G, 150A @ 60%
K10413-15-xM
3m, 4m or 5m
LG 250G, 200A @ 60%
K10413-25-xM
3m, 4m or 5m
LG 240G, 220A @ 60%
K10413-24-xM
3m, 4m or 5m
LG 260G, 260A @ 60%
K10413-26-xM
3m, 4m or 5m
LG 360G, 320A @ 60%
K10413-36-xM
3m, 4m or 5m
LG420G, 380A @ 60%
K10413-42-xM
3m, 4m or 5m
WATER COOLED
LG410W, 350A @ 100%
K10413-410-xM
3m, 4m or 5m
LG500W, 500A @ 100%
K10413-500-xM
3m, 4m or 5m
• A Wide Variety of Welding Waveforms for Every Application
• Fast, Reliable Digital Communication
• Expand or Update With Lincoln’s Latest Welding Processes
• Multi-Process Welding On A Variety Of Materials
Waveform Control Technology®
• Superior Welding Performance
• Welding Characteristics To Fit
Your Needs
• Weld Steel, Stainless Steel,
Aluminium and Alloy Materials
With Ease
Warranty (years)
Tandem MIG
Rapid arc®
Power mode®
Pulse-on-Pulse®
Digital
communications
Arc gouging
Flux-Cored
FEATURES
STT
DC
5-450
•
Power Wave® 345M C
CC/CV
DC
5-350
•
•
• •
•
•
3
Power Wave® 405M
CC/CV DC
5-425
•
•
• •
•
•
3
CC/CV DC
5-500
•
•
• •
•
•
3
CC/CV DC
STT
5-500
•
•
• •
•
•
3
STT ®II
®
Power Wave 455M
®
Power Wave 455M/STT
KEY:
Excellent
®
Good
Optional
MIG
Current
Range
(Amps)
Stick
Polarity
MIG Pulse
PROCESS
TIG touch start
OUTPUT
Mode
MODEL
Waveform
Control technology®
Computer screen
showing waveform arc characteristic.
3
PULSE / STT Welders
Invertec STT II / LF-33
®
®
Hz
M
Parts &
Labour
AN
R
CE PLUS P
Pulse/STT Welders
Rated Output
Current/Voltage/
Duty Cycle
Product
Number
Input
Power
STT II
Package
K1527-1
PSTT2-1-A
200/220/380/400/440/3/50-60
Product
Name
LF-33 air/water
225A/29V/60%
200A/28V/100%
Product
Number
Input Power
Wire Feed
Speed Range
(m/min)
K14030-1W
34-44 VAC
1 - 20
44
www.lincolnelectric.eu
O
T
Recommended Package Includes
• LF-33 wire feeder 4-roll air-cooled,
1,0-1,2mm drive roll.
• STT II power Source on undercarriage,
Input cable, Work clamp and cable
assembly.
• 5m-Interconnection cable, MIG gun and
gas regulator.
Recommended wire feeders
LF-37
• Continuous control of wire feed Speed and voltage
• Trigger mode for 2/4-step.
• Well featured; the LF 33 features 2/4 stoke, Burnback, gas
purge, cold inch, run in.
• Bright digital Voltage and Amperes meter.
• Meet IEC974-1, ROHS and CE standards for safety and
reliability.
Product
Name
Fuse
size
17A
Output
Range
Dimensions
HxWxD
(mm)
5-450A(peak)
589 x 336 x 620
5-125A (background) 1000 x 700 x 1000
Wire Size Range
(mm)
Solid
Cored
0,8 - 1,6
1,0 - 1,6
Net
Weight
(kg)
59
115
Dimensions
HxWxD
(mm)
Net
Weight
(kg)
440 x 270 x 636
17
N
IO
CT
R
O
PHASE
3
Year warranty
RF
• Controlled penetration and outstanding heat input
control—Ideal for welding joints with open root, gaps, or on
thin material with no burnthrough.
• Reduced spatter and fumes—Current is controlled to
achieve optimal metal transfer.
• Various shielding gases—blends of Argon including
Helium or 100% CO2 with larger diameter wires.
• Good bead control and faster travel speeds—Can
replace TIG in many applications.
• Background and Tailout Current—accurately control fine
and coarse heat input for reduced distortion and burnthrough
as well as proper penetration.
• Adjustable Hot Start controls the heat at the start of the
weld.
3 5060
PE
Input
N ELEC
OL
E
Processes
MIG-STT®
Output STT DC
IC
TR
The revolutionary STT® II power source combines high
frequency inverter technology with advanced Waveform
Control Technology® to provide a better welding solution than
traditional short arc MIG.
LIN
C
Featuring Surface Tension Transfer® process
PULSE / STT Welders
Power Wave 345M C
®
Pulsed perfection, multi combinations
PHASE
3
M
Hz
Parts &
Labour
AN
R
CE PLUS P
O
N
IO
T
Base Unit Includes
• Air cooled model :
5m-input cable, 5m-work cable,
undercarriage, drive roll kit (4 rolls)1.2
mm solid wire.
• As standard a variety materials are supported; Steel,
Stainless, Aluminium but also High Nickel and CuSi.
• Water cooled model :
5m-input cable, 5m-work cable,
undercarriage, drive roll kit (4 rolls)1.2
mm solid wire, Coolarc 25, Push-pull
kit
• RapidArc® for a higher travel speed and less Heat Input
with steel and Stainless.
Order
K10355-2A Power Wave® 345M C air
• PowerMode® for premium Short Arc welding Steel and
Stainless especially with thin plate.
CT
Year warranty
R
E
3 5060
O
Input
N ELEC
OL
IC
TR
DC
Output CC
CV
LIN
C
Pulse MIG, Pulse-On-Pulse®, MIG, FluxCored, Stick, Lift TIG DC
RF
• Superb arc welding characteristics in Pulse, Pulse onPulse®, CV, Stick and TIG DC.
Processes
PE
The Power Wave® 345M C is an Industrial Compact Pulse
welding machine with a complete set of features. As standard
the machine is supplied with an extended set of synergic
welding programs to support Steel, Stainless Steel, Aluminium,
High Nickel, CUSi, Conventional CV, MIG, Stick and Lift TIG.
The Power Wave® 345M C is a user-friendly machine with a
clean and easy to understand user interface and an extensive
set of features. The case of the machine itself incorporates a
parts storage compartment. Incorporated in the machine is the
same rugged four-roll drive as used in all new LF wire feeders
assuring perfect feeding from the coil to gun tip.
K10358-2W Power Wave® 345M C water
• S2F for premium Aluminium welding
• Clearing Pulse providing a clean wire tip without a ball,
ready to restart.
• Pulse-on-Pulse® for a nice weld bead appearance and the
welding of thin plate.
• Hot/Soft start procedure to support Hot start for aluminium
applications.
Product
Name
PW 345MC air
PW 345MC water
Product
Number
Input Power
K10355-2A
K10358-2W
230/400/3/50-60
Rated Output
Current/Voltage/
Duty Cycle
350A/45V/35%
300A/32V/60%
230A/29V/100%
Fuse
size
Output
Range
32A
5-350A
(1.2-20 m/min)
Max. OCV: 47V
Dimensions
HxWxD
(mm)
Net
Weight
(kg)
870 x 680 x 1060
135
162
Pulse/STT Welders
• Meet IEC974-1, ROHS and CE standards for safety and
reliability.
45
www.lincolnelectric.eu
PULSE / STT Welders
Power Wave 405M / LF-40
®
Superior arc performance, revolutionary communication
The Power Wave® 405M with LF40 Semi-automatic wire
feeder package was developed with the welder in mind. All the
welding controls are located at the wire feeder, making it easy
to adjust the welding parameters. The power source itself can
be on a distance and only carries basic controls.
Designed rugged for industrial use. The Power Wave® 405M
output of 400 Amps supports almost all manual pulse and CV
welding applications with solid wires. The feeder can be
used static, or portable. Supplied with Coolarc 10
water cooler and undercarriage .
Processes
K10372-2-A
PW405M water
K10372-2-W
Product
Name
LF-40 (water push-pull)
230/380/415/440/1/3ph
400A/36V/ 35%
Hz
R
CE PLUS P
Fuse
size
25A
350A/34V/60%
Output
Range
5-425A
Dimensions
HxWxD
(mm)
700 x 700 x 1000
10-45V
Wire Feed
Speed Range
(m/min)
Solid
Wire Size Range
(mm)
Cored
K10340-40-5-W
40 VDC
2 - 20
0,8 - 1,6
1,0 - 1,6
Net
Weight
(kg)
53
71
Dimensions
HxWxD
(mm)
Net
Weight
(kg)
753 x 470 x 295
20,5
N
IO
CT
E
Parts &
Labour
AN
O
• LF-40 wire feeder 4-roll water cooled,
1,0-1,2mm drive roll.
• PW405M power source on
undercarriage, Coolarc 25, Input cable,
Work clamp and cable assembly.
• 5m-Interconnection cable, MIG gun and
gas regulator.
Input Power
www.lincolnelectric.eu
M
Recommended Package Includes
Product
Number
46
R
O
Pulse/STT Welders
PW405M air
Rated Output
Current/Voltage/
Duty Cycle
Input
Power
RF
Product
Number
3
Year warranty
PE
PHASE
• Superb arc welding characteristics in Pulse, Double
Pulse, CV, stick or DC TIG
• Double Pulse supports thin plate Aluminium welding and
high arc stability at low Amps
• Features Hot/Soft start, Synergic control, Craterfill and 8
Memory locations
• Excellent feeding; four roll drive
• Unique “fliptop” protects the wire drive mechanism,
program selection and controls
• Excellent arc starting
• Water flow sensing (water cooled package)
• Meet IEC974-1, ROHS and CE standards for safety and
reliability.
Product
Name
3 5060
Input
N ELEC
OL
IC
TR
DC
Output CC
CV
LIN
C
Pulse MIG, Pulse-On-Pulse®, MIG, FluxCored, Stick, Lift TIG DC
T
PULSE / STT Welders
Power Wave 455M / LF-40
®
Superior arc performance, revolutionary communication
For welding thicker materials in robotics, hard automation and
Semi-automatic applications, choose the Power Wave® 455M
with the LF-40 wire feeder. The PW455M features Waveform
Control Technology for superior arc performance on a variety
of materials, including steel, stainless, aluminium and nickel
alloys, and custom control of the arc for each wire type and
size for consistent welds time after time.
Processes
• Lincoln’s® Waveform Control Technology® gives you the
ability to select the right waveform for each application,
enabling patented processes like Pulse-On-Pulse® and
Power Mode®.
Recommended package Includes
• LF-40 wire feeder 4-roll water cooled,
1,0-1,2mm drive roll.
M
Hz
R
CE PLUS P
N
IO
CT
Parts &
Labour
AN
E
R
O
PHASE
3
Year warranty
RF
3 5060
PE
Input
N ELEC
OL
IC
TR
DC
Output CC
CV
LIN
C
Pulse-On-Pulse®, MIG, Flux-Cored, Stick,
Lift TIG DC
O
T
• PW455M power source on
undercarriage, Water cooler, Input
cable, Work clamp and cable
assembly.
• Choose from over 60 standard welding waveform
programs that offer a broad range of electrode size, type
and shielding gas combinations to give you optimal
appearance, penetration, beadshape and travel speed for
each application.
• 5m-Interconnection cable, MIG gun and
gas regulator.
•Optional communication modules provide networking and
process monitoring capabilities via DeviceNet or Ethernet.
Product
Name
Product
Number
Input
Power
PW 455M on
undercarriage
K24582
380/415/3/50/60
Product
Name
LF-40 (water push-pull)
Rated Output
Current/Voltage/
Duty Cycle
500A/40V/60%
400A/36V/100%
Product
Number
Input Power
Wire Feed
Speed Range
(m/min)
K10340-40-5-W
40 VDC
2 - 20
Fuse
size
Output
Range
44A
5-500A
Max. OCV:75V
Wire Size Range
(mm)
Solid
Cored
0,8 - 1,6
1,0 - 1,6
Dimensions
HxWxD
(mm)
Net
Weight
(kg)
663 x 505 x 835
114
Dimensions
HxWxD
(mm)
Net
Weight
(kg)
753 x 470 x 295
20,5
Pulse/STT Welders
• Features Hot/Soft start, Synergic control, Craterfill and 8
Memory locations
• Excellent feeding; four roll drive
• Unique “fliptop” protects the wire drive mechanism,
program selection and controls
• Water flow sensing (water cooled package)
• Meet IEC974-1, ROHS and CE standards for safety and
reliability.
47
www.lincolnelectric.eu
PULSE / STT Welders
Power
Wave 455M/STT / PF-10M DUAL
Superior arc performance, revolutionary communication
®
For welding thicker materials in robotics, hard automation
and Semi-automatic applications and for other applications
where heat input control, minimal distortion and reduced
spatter are essential, opt for the Power Wave® 455M/STT
with the Power Feed-10M DUAL wire feeder.
The PF10M Dual is a unique dual-head wire feeder which
allows you to use two different types of wires individually
for different welding applications (STT® and Pulse as an
example).
Processes
M
R
CE PLUS P
O
T
Recommended package Includes
• Lincoln’s® Waveform Control Technology® gives you the
ability to select the right waveform for each application,
enabling patented processes like Pulse-On-Pulse® and
Power Mode®.
• Choose from over 60 standard welding waveform
programs that offer a broad range of electrode size, type
and shielding gas combinations to give you optimal
appearance, penetration, beadshape and travel speed for
each application.
• PF-10M DUAL wire feeder 4-roll water
cooled, 1,0-1,2mm drive roll.
• PW455M/STT power source on
undercarriage, Water Cooler, Input
cable, Work clamp and cable
assembly.
• 5m-Interconnection cable, 2 MIG guns
(air and water) and 2 gas regulators.
•Optional communication modules provide networking and
process monitoring capabilities via DeviceNet or Ethernet.
• STT welding mode
• Dual-head for more versatility
• Split wire guide system
• Powerful wire drive motor for large wire diameters and
high speeds
• Meet IEC974-1, ROHS and CE standards for safety and
reliability.
Rated Output
Current/Voltage/
Duty Cycle
Pulse/STT Welders
Product
Name
Product
Number
Input
Power
PW 455M/STT
K2459-2
380/415/3/50/60
Output
Range
48A
5-500A
Max. OCV:75V
Product
Number
Input Power
Wire Feed
Speed Range
(m/min)
K2461-21
40 VAC
1,2 - 30,5
Product
Name
Power Feed 10M DUAL
500A/40V/60%
400A/36V/100%
STT : 325A/33V/100X
Fuse
size
48
www.lincolnelectric.eu
Wire Size Range
(mm)
Solid
Cored
0,6 - 2,4
0,9 - 3,0
Dimensions
HxWxD
(mm)
Net
Weight
(kg)
663 x 505 x 835
121
Dimensions
HxWxD
(mm)
Net
Weight
(kg)
508 x 584 x 864
48
N
IO
CT
Parts &
Labour
AN
E
R
O
Hz
RF
PHASE
3
Year warranty
PE
3 5060
Input
N ELEC
OL
IC
TR
DC
Output CC
CV
LIN
C
Pulsed MIG, Pulse-On-Pulse®,
MIG, MIG-STT, Flux-Cored, Stick, TIG,
Gouging
Pulse/ STT Welding : options & accessories
INTERCONNECTION
CABLES
Fast-mate (x2), gas hose, protection,
(2,5 ; 5 ; 10 ; 15 ; 20 ; 25 & 30m)
Item n° :
K10347-PG-xM (air cooled)
K10347-PGW-xM (water cooled)
MIG TORCHES
LINC GUN™ range
As standard these guns come with an
ergonomic grip, springs on both sides of the
cable, retractable pins and a "rotating ball joint"
at the end of the gun grip
AIR COOLED
LG 150G, 150A @ 60%
K10413-15-xM
3m, 4m or 5m
LG 250G, 200A @ 60%
K10413-25-xM
3m, 4m or 5m
LG 240G, 220A @ 60%
K10413-24-xM
3m, 4m or 5m
LG 260G, 260A @ 60%
K10413-26-xM
3m, 4m or 5m
LG 360G, 320A @ 60%
K10413-36-xM
3m, 4m or 5m
WATER COOLERS
LG420G, 380A @ 60%
K10413-42-xM
3m, 4m or 5m
COOLARC 25
Item n° : K14037-1
WATER COOLED
GAS PRESSURE
REGULATOR
Accommodates CO2, argon or argonblended gas cylinders. Includes a
cylinder pressure gauge, dual scale
flow gauge and 1,3m gas hose
Item n° : consult us
COOLARC 40
Item n° : K2187-2
LG410W, 350A @ 100%
K10413-410-xM
3m, 4m or 5m
LG500W, 500A @ 100%
K10413-500-xM
3m, 4m or 5m
LGS2F ALU, 400A, 100%
K10413-ALU-4M
4m
PUSH-PULL TORCHES
LGPP300G, air cooled
K10413-PPA
K10413-PPAR
8m, standard
8m, with remote ctrl
LGPP400W, water cooled
K10413-PPW
K10413-PPWR
8m, standard
8m, with remote ctrl
Pulse/STT Welders
Coolant ACOROX (2x5l)
Item n° : K10420-1
49
www.lincolnelectric.eu
Semi-automatic Wire Feeders
• Designed For MIG or Flux-Cored
Processes
• Models For Shop Fabrication or
Field Construction
MODEL
4
A/W
3
4
A/W
3
LF-22
1.0-20
0.8-1.6
1.0-1.6
2
A
3
LF-24
1.0-20
0.8-1.6
1.0-1.6
4
A/W
3
LF-24 Pro
1.0-20
0.8-1.6
1.0-1.6
4
A/W
3
LF-33
1.0-20
0.8-1.6
1.0-1.6
4
A/W
3
LF-34
1.0-20
0.8-1.6
1.0-1.6
4
A/W
3
LF-35
1.0-20
0.8-1.6
1.0-1.6
4
A/W
3
LF-40
2.0-20
0.8-1.6
1.0-1.6
4
A/W
3
LN-10
0.6-1.6
0.6-2.4
0.9-2.0
0.9-3.2
4
A/W
3
DH-10
1.3-31.7 (high)
0.8-19 (low)
1.3-31.7 (high)
0.8-19 (low)
0.6-1.6
0.6-2.4
0.9-2.0
0.9-3.2
4
A/W
3
LN-15
1.3-17.8
0.6-1.3
0.9-1.6
2
A
3
LN-23P
0.76-4.3
1.7-2.0
2
A
3
LN-25
1.3-17.8
0.6-1.6
0.9-2.0
2
A
3
LF-37
1.5-20
0.6-1.6
1.0-1.6
4
A/W
3
LF-38
1.5-20
0.6-1.6
1.0-1.6
4
A/W
3
Power Feed ™ 10M Dual
www.lincolnelectric.eu
Submerged Arc
0.9-2.0
0.9-3.0
0.9-2.0
0.9-3.0
Flux-Cored
0.6-1.6
0.8-2.4
0.6-1.6
0.8-2.4
MIG-STT®
2.0-30.5 (high)
1.3-20.3 (low)
2.0-30.5 (high)
1.3-20.3 (low)
Power Feed ™ 10M
Pulsed
Cored
Warranty (years)
FEATURES
Cooling
WIRE SIZE
RANGE
(mm)
Solid
MIG
Digital
Analog
Field
WIRE FEED
SPEED RANGE
(m/min)
Roll Drive
PROCESS
Semi-automatic Wire Feeders
LINC FEED-22, -24 & -24 PRO
The LF-22, LF-24 and LF-24 Pro are portable wire feeders
with stabilised wire feed speed. They include a rugged 2 or 4
roll wire feed unit, controls for cold inch and gas purge and
built-in burn back facility.
They can be mounted on the power source with a swivelling,
wheeled, carriage. Power source to wire feeder
interconnecting cables assemblies are available in different
lengths that allow working at a distance from the power
source
Processes
MIG, Flux-Cored
3
O
R
M
Parts &
Labour
AN
R
CE PLUS P
N
IO
CT
Year warranty
RF
VAC
E
34-44
PE
Input
N ELEC
OL
IC
TR
LIN
C
Output
O
T
Base Unit Includes
Drive roll kit 1,0-1,2mm, Spindle and wire
reel adaptor on mobile mounting stand
• Continuous control of wire feed speed.
Recommended Power Sources
• Trigger mode selection for standard 2-steps or
interlocking 4-steps.
Powertec 300S, Powertec 360S, Powertec
420S, Powertec 500S
• Gas purge to strike the arc with full shielding.
Order
• Burnback preventing the wire sticking in the weld puddle
K14024-1
LF-22
• Euroconnector for European welding torches.
K14025-1W
LF-24
• Cold inch control. Used to feed wire into the torch.
K14026-1W
LF-24 PRO
• Stabilised wire drive system for constant control of wire
feed speed.
• Delivered mounted on an undercarriage
+ for the LF24 PRO
• Bright digital Volt and Amperes meter
• Synergic control to support easy control by the welder
• Meet IEC974-1, ROHS and CE standards for safety and
reliability.
Product
Name
Product
Number
Drive
roll
Cooling
LF-22
K14024-1
2
A
LF-24
K14025-1W
4
A/W
LF-24 PRO
K14026-1W
4
A/W
Input
Power
Wire Feed
Speed Range
(m/min)
34-44 VAC
1 - 20
Wire Size Range
(mm)
Solid
Cored
0,8 - 1,6
1,0 - 1,6
Dimensions
HxWxD
(mm)
Net
Weight
(kg)
440 x 270 x 636
17
Semi-automatic Wire Feeders
• Run in to support perfect starting
51
www.lincolnelectric.eu
Semi-automatic Wire Feeders
LINC FEED-33, -34 & -35
Small & robust, flexible & complete
Processes
MIG, Flux-Cored
3
Parts &
Labour
AN
R
CE PLUS P
N
E
M
CT
Year warranty
R
O
VAC
RF
34-44
PE
Input
N ELEC
OL
IO
LIN
C
Output
IC
TR
The LF33, 34 and 35 are wire feeders designed to withstand
the extreme environmental conditions. With these feeders we
focussed on ruggedness, dimensions and ease of use. The
result is an incredibly rugged, protective casing as standard
completed with an undercarriage, for use under tough
industrial conditions. The feeders are able to accept D300 (15
KG) but also small D200 (5KG) wire spools, using solid or
cored wire including Innershield.The most simple one is the
LF33 equipped with 2/4-step, run-in, wire inch and gas purge.
Two clear digital meters display the welding Voltage and
Amperage. The LF34 & LF35 are the more advanced models.
Both feeders have the unique digital
displays showing the pre-settable and actual welding
parameters.
O
T
Base Unit Includes
Drive roll kit 1,0-1,2mm, Spindle and wire
reel adaptor on mobile mounting stand,
Water connection kit
Recommended Power Sources
STT® II, CV420, CV505
Order
Semi-automatic Wire Feeders
• Small, rugged and easy to handle feeder, with bright
digital Voltage and Ammeter
• All drives are equipped with an excellent wire drive
system with four large drive rolls and powerful motor
• Electronic feedback system on the wire drive will
guarantee consistent wire feed speed
• Ergonomic design; User friendly controls with digital
displays showing text in the language of your choice
(LF34&35)
• Optional remote controlled job selection (10) on
the LF35
• Meet IEC974-1, ROHS and CE standards for safety and
reliability.
Product
Name
Product
Number
LF-33
K14030-1W
LF-34
K14035-1W
LF-35
K14036-1W
Drive
roll
Cooling
Input
Power
4
A/W
34-44 VAC
52
www.lincolnelectric.eu
Wire Feed
Speed Range
(m/min)
K14024-1
LF-33
K14025-1W
LF-34
K14026-1W
LF-35
Wire Size Range
(mm)
Solid
Cored
Dimensions
HxWxD
(mm)
Net
Weight
(kg)
440 x 270 x 636
17
1,0 - 20
1,5 - 20
1,5 - 20
0,8 - 1,6
1,0 - 1,6
Semi-automatic Wire Feeders
LINC FEED 37 & 38
Robust for perfect feeding
The LF37 and LF38 are portable wire feeders designed to
withstand the extreme environmental conditions of shipyards
and construction sites. The feeders are able to accept D300
(15 KG) but also small D200 (5KG) wire spools with solid or
cored wire including Innershield. To support long cable
packages we equipped these feeders with a gas flow meter
on the inside.
They have the ultimate user-friendly controls. All machine
settings like 2/4 Stroke, Burn Back, Hot / Soft Start and Crater
Fill can be viewed by using one single Select push button. The
display will show the function and setting in the language of
your choice.
The LF38 has in addition a set of synergic programs and
memory.
Processes
MIG, Flux-Cored
3
M
Parts &
Labour
AN
R
CE PLUS P
N
IO
E
O
R
CT
Year warranty
RF
42
VAC
PE
Input
N ELEC
OL
IC
TR
LIN
C
Output
O
T
Base unit includes
Drive roll kit 1,0-1,2mm
Recommended Power Source
CV-420, CV505, STT® II, DC 400, DC 655,
RANGER 305D, V350 PRO
K10406
LF-37
K10407
LF-38
• Excellent feeding; four roll drive as standard.
• Portable and extremely sturdy.
• Flow meter inside
• Trouble-free feeding.
• Multi language.
• Large bright Volt and Amp meters; allows Pre-setting
of the welding parameters before welding and read-out
during welding.
• Fully featured; 2/4 steps, Crater fill and Soft / Hot start.
• 10 memories to save welding parameters (LF38)
• Equipped with water connections.
• Meet IEC974-1, ROHS and CE standards for safety and
reliability.
Product
Name
Product
Number
LF-37
K10406
LF-38
K10407
Drive
roll
Cooling
Input
Power
Wire Feed
Speed Range
(m/min)
4
A/W
42 VAC
1,5 - 20
Wire Size Range
(mm)
Solid
Cored
0,6 - 1,6
1,0 - 1,6
Dimensions
HxWxD
(mm)
Net
Weight
(kg)
356 x 188 x 534
16
Semi-automatic Wire Feeders
Order
53
www.lincolnelectric.eu
Semi-automatic Wire Feeders
LINC FEED-40
Designed to work with Lincoln’s digital power sources
Processes
The LINC FEED wire feeder family is designed to combine easy
handling and control by the welder with perfect wire feeding.
All LINC FEED feeders are equipped with the same rugged
four-roll drive system. This drive is easy to access and
protected by the unique fliptop cover. The wire guidance from
the coil to gun tip is smooth and accurate. It is designed to
eliminate tangles and guarantee trouble free feeding.
LINC FEED feeders can used static, or portable.
Mounted on a rugged undercarriage or on a boom. The LF40 is
fully featured and designed to work with all the Power Wave®
machines.
MIG, Flux-Cored
3
O
R
M
Parts &
Labour
AN
R
CE PLUS P
N
IO
CT
Year warranty
RF
VDC
E
40
PE
Input
N ELEC
OL
IC
TR
LIN
C
Output
O
T
Base Unit Includes
Drive roll kit 1,0-1,2mm, Spindle and wire
reel adaptor on mobile mounting stand,
Water connection kit
Recommended Power Sources
Power Wave® 405M, Power Wave® 455M,
Power Wave® 455M/STT
• Excellent feeding; four roll drive as standard.
• Ergonomic design; User friendly controls with digital
displays showing text to support the operation.
• Safety; Unique ''fliptop'' design prevents and protects the
wire drive mechanism.
• Large bright Volt and Amp meters; allows Pre-setting of
the welding parameters before welding and read-out during
welding.
• Well featured; the LF 40 features 2/4 stoke, Crater fill and
Soft / Hot start, synergic welding mode and 8 memories.
• Meet IEC974-1, ROHS and CE standards for safety and
reliability.
Semi-automatic Wire Feeders
Product
Name
Product
Number
LF-40
K10340-40-5-W
Drive
roll
Cooling
4
W
54
www.lincolnelectric.eu
Order
K10340-40-5-W
Input
Power
Wire Feed
Speed Range
(m/min)
Solid
Wire Size Range
(mm)
Cored
40 VDC
2 - 20
0.8 - 1.6
1.0 - 1.6
LF-40
Dimensions
HxWxD
(mm)
Net
Weight
(kg)
753 x 470 x 295
20.5
Semi-automatic Wire Feeders
LN-15
Portable semi-automatic wire feeder
Processes
MIG, Innershield
3
O
M
Parts &
Labour
AN
R
CE PLUS P
N
IO
CT
Year warranty
R
E
42
VAC
RF
Input
N ELEC
OL
IC
TR
LIN
C
Output
PE
The LN-15 CE is one of the smallest and perhaps the most
rugged and portable wire feeder in the world.
Designed with a plastic case resistant to high temperature and
abrasion, aluminium roll cage and fully encapsulated PC
boards, the LN-15 CE is perfect for the construction,
shipbuilding and pipeline industries. The unit is lightweight
and portable, ideally suited to carry small D200 wire spools of
any solid or cored wire.
As standard the LN-15 CE features two large illuminated
digital displays of Wire Feed Speed and actual welding
voltage. The 2/4-stroke, pre and post flow and an adjustable
flow meter will also support the welder even on the most
demanding of jobs.
O
T
Recommended Power Sources
CV-420, CV-505, DC 400, V350-PRO,
STT® II, RANGER 305D
Order
K1871-3
LN-15
Product
Name
Product
Number
Drive
roll
Cooling
Input
Power
Wire Feed
Speed Range
(m/min)
Wire Size Range
(mm)
Solid
Dimensions
HxWxD
(mm)
Net
Weight
(kg)
LN-15
K1871-3
2
A/W
42 VAC
1,3-17,8
0.6 - 1.2
356 x 188 x 553
13
Semi-automatic Wire Feeders
• Rugged patented Lincoln wire Drive system.
• Illuminated digital displays are easy to read in adverse
lighting conditions.
• Fully enclosed, heat spatter and impact resistant, molded
casing.
• Full body aluminium roll cage.
• Adjustable carrying strap.
• Meet IEC974-1, ROHS and CE standards for safety and
reliability.
55
www.lincolnelectric.eu
Semi-automatic Wire Feeders
DH-10 & LN-10
Single header & double header wire feeders
MIG, Pulsed, MIG-STT®, Flux-Cored
3
M
Parts &
Labour
AN
R
CE PLUS P
N
IO
CT
Year warranty
R
E
42
VAC
O
Input
N ELEC
OL
IC
TR
LIN
C
Output
RF
Precision times two! This DH-10 dual wire feeder utilises
Lincoln’s® revolutionary split wire guide system to precisely
align and feed wire, and its dual wire feeder system allows
you to weld with two different wires, with two different
welding procedures using one power source.
Processes
PE
The LN-10 Semi-automatic wire feeder features the
revolutionary split wire guide which precisely aligns and
supports the wire through the entire feeding system. The
system also features a rugged 4 driven roll design for positive
wire feeding. The LN-10’s modular design provides for many
mounting options, including boom mounting.
O
T
Base unit includes
Euroconnector, Water kit, Spool protective
cover, Drive roll kit 1,0-1,2mm
Recommended Power Sources
• Standard dual procedure allows operator to set different
voltage and wire feed speeds and switch between the two.
CV420, CV505, V350PRO, DC400, DC655,
DC1000, STT II
• Selectable trigger control for standard 2-step, interlocking
4-step.
Order
• Digital Display standard.
K1559-5
LN-10 Bench model
K1499-5
DH-10 Bench model
•Preflow/Postflow/Burnback and Spot Timer standard.
DH-10
• Each side of the DH-10 wire drive system is driven by
its own motor and gear box for confidence that the feeder
won’t go down.
• Split wire guide and 4 driven rolls for positive wire
feeding.
Semi-automatic Wire Feeders
• Presettable voltage and wire feed speed for extra control.
• Meet IEC974-1, ROHS and CE standards for safety and
reliability.
Product
Name
Product
Number
LN-10
K1559-5
DH-10
K1499-5
56
www.lincolnelectric.eu
Drive
roll
Cooling
4
A/W
Input
Power
Wire Feed
Speed Range
(m/min)
Solid
Wire Size Range
(mm)
Cored
42 VAC
0.8 - 19
0,6 - 1,2
0,8 - 2,4
Dimensions
HxWxD
(mm)
Net
Weight
(kg)
406 X 381 X 787
33.6
533 x 508 x 813
52.6
Semi-automatic Wire Feeders
™
Power
Feed
10M & 10M Dual
Single and dual bench wire feeders
The Power FeedTM 10M wire feeder is revolutionary for its ease
of use and flexibility. Designed to maximize the capabilities of
the Power Wave® 455, the combination of high-tech power
source and wire feeder, outperform traditional arc welding
methods. The Power FeedTM 10’s design allows the control box
to be placed anywhere – near the work piece or on top of the
power source.
Processes
MIG, Pulsed, MIG-STT®, Flux-Cored
3
M
Parts &
Labour
AN
R
CE PLUS P
N
IO
E
O
R
CT
Year warranty
RF
40
VDC
PE
Input
N ELEC
OL
IC
TR
LIN
C
Output
O
T
TM
The Power Feed 10M Dual is designed for shops that require
welding flexibility and superior welding performance in one
complete wire feeder package. Dual feeder means you can put
two different types of wire on the feeder, allowing you weld
steel, stainless or aluminium from one power source. Combine
this wire feeder flexibility with one of Lincoln’s new Power
Wave® power sources, and you will be able to MIG weld, STT
weld or Pulse weld with ease.
Base unit includes
Euroconnector, Water kit, Spool protective
cover, MSP4 panel, Drive roll kit 1,01,2mm
Recommended Power Sources
Power Wave® 405M, Power Wave® 455M,
Power Wave® 455M/STT
K2460-2
PF10M Bench model
K2461-2
PF10M DUAL Bench model
• Meet IEC974-1, ROHS and CE standards for safety and
reliability.
Product
Name
Product
Number
PF-10M
K2460-2
PF-10MD
Drive
roll
Cooling
4
A/W
K2461-2
Input
Power
40 VDC
Wire Feed
Speed Range
(m/min)
Wire Size Range
(mm)
Cored
Dimensions
HxWxD
(mm)
Net
Weight
(kg)
High speed
1,5 - 20
High speed
0,6 - 1,6
1,0 - 1,6
470 x 343 x 775
16
Low speed
1,27 - 20,3
Low speed
0.6 - 2,4 0.9 - 3.0
508 x 508 x 781
41
Solid
Semi-automatic Wire Feeders
Order
• World-class arc performance on steel, stainless steel,
aluminium and other materials.
• Waveform Control Technology® featuring patented
processes like Pulse-On-Pulse®, for a TIG-like bead
appearance, and Power Mode®, for a stable arc at low
current levels.
• utilises ArcLink®—the leading digital communication protool for welding, making it the best choice for seamless,
time critical integration with the power source.
• Pulsed MIG process—great for low spatter, low heat
input and out-of-position applications—makes virtually
any operator a better welder!
• Easy-to-understand user interface panel with large
numeric displays make it easy to set weld parameters.
• Features push-pull capability for great performance
on aluminium.
57
www.lincolnelectric.eu
Semi-automatic Wire Feeders
LN-23P
Semi-automatic wire feeder
Processes
Innershield (FCAW-S)
3
O
M
Parts &
Labour
AN
R
CE PLUS P
N
CT
Year warranty
R
E
VAC
IO
LIN
C
115
RF
Input
N ELEC
OL
IC
TR
Output
PE
The LN-23P semi-automatic wire feeder is able to
handle the toughest work sites and is an excellent
choice for field erection and pipe welding applications. It
is portable, easy to set-up, and ideal for reaching
difficult locations.
O
T
®
• Weighs less than 23 kg including optional Magnum
Innershield® gun and 14 lb (6.3 kg) coil of electrode.
• Continuous wire feed speed control, voltage control and
analog voltmeter are standard.
• Completely enclosed wire reel keeps the wire free of
contaminants.
Recommended Power Sources
DC-400, DC-655, V350-PRO
Order
K316L-6
LN-23P
• Equipped with trigger interlock circuit to reduce operator
fatigue.
• Gun-mounted two-position switch allows on-the-fly
change to 83% of the preset wire feed speed.
• Electrode and control cable quickly connect to power
source.
• One or two LN-23P wire feeders can be directly
connected to recommended Lincoln power sources, but only
one can be used at a time.
• Meet IEC974-1, ROHS and CE standards for safety and
reliability.
Semi-automatic Wire Feeders
Product
Name
Product
Number
Drive
roll
Cooling
Input
Power
Wire Feed
Speed Range
(m/min)
Wire Size Range
(mm)
Cored
Dimensions
HxWxD
(mm)
Net
Weight
(kg)
LN-23P
K316L-6
2
A/W
115V AC
0.76-4.3
1.7-2.0
520 x 230 x 480
12.3
58
www.lincolnelectric.eu
Semi-automatic Wire Feeders
LN-25
Portable construction wire feeder
The LN-25 Semi-automatic wire feeder is ideal for field or
construction use. Since it is powered across the arc, no
control cables are needed! Simply connect the weld cable,
attach the arc sensing clip, and you are ready to go.
Processes
•For MIG and flux-cored arc welding processes using up
to 19.9 kg spools.
Input 10-110
VDC
MIG, Flux-Cored
LIN
C
3
Parts &
Labour
AN
R
CE PLUS P
IO
CT
O
M
E
RF
R
N
Year warranty
PE
•Designed for 0.6-1.6 mm solid, 0.9-2.0 mm cored and 0.91.6 mm) aluminium wire sizes.
N ELEC
OL
IC
TR
Output
O
T
Recommended Power Sources
All Electric or Engine Driven Welders with
CV capability
•Selectable dial for setting low range, 1.3-8.9 m/min wire
feed speed or high range, 1.3-17.8 m/min wire feed speed.
Order
•Includes DC voltmeter, voltmeter polarity switch and 4.6 m
arc sensing lead and clip and 508 mm weld power cable.
K428-2
K449-3
• Automatic overvoltage and motor overload shutdown
protection.
LN-25
LN-25 (w/ Internal Contactor
and Gas Solenoid)
• Double-latched case features an insulated gun holder and
easy access to wire.
• Entire unit is compact and portable and will pass
through a 400 mm diameter manhole/manway.
Product
Name
Product
Number
LN-25
K428-2
LN-25
K449-3
Drive
roll
Cooling
2
A
Input
Power
Wire Feed
Speed Range
(m/min)
Solid
Wire Size Range
(mm)
Cored
42 VAC
1,27 -17,8
0,6 - 1,6
Dimensions
HxWxD
(mm)
Net
Weight
(kg)
14
1,2 - 2,0
356 x 188 x 356
17
Semi-automatic Wire Feeders
• Meet IEC974-1, ROHS and CE standards for safety and
reliability.
59
www.lincolnelectric.eu
Semi-automatic Wire Feeders : options & accessories
INTERCONNECTION CABLES
MIG TORCHES
Fast-mate (x2), gas hose, protection,
(2,5 ; 5 ; 10 ; 15 ; 20 ; 25 & 30m)
Item n° :
K10347-PG-xM (air cooled)
K10347-PGW-xM (water cooled)
LINC GUN™ range
As standard these guns come with an
ergonomic grip, springs on both sides of the
cable, retractable pins and a "rotating ball joint"
at the end of the gun grip
AIR COOLED
GAS PRESSURE
REGULATOR
Accommodates CO2, argon or argonblended gas cylinders. Includes a
cylinder pressure gauge, dual scale flow
gauge and 1,3m gas hose
Item n° : consult us
WATER CONNECTION KIT
Includes quick connect fittings on front and
back of wire drive for use with water-cooled
guns and Coolers. Kit provides for one gun.
(LN-10, DH-10, PF 10M, PF 10M Dual)
Item n° : K590-6
LG 150G, 150A @ 60%
K10413-15-xM
3m, 4m or 5m
LG 250G, 200A @ 60%
K10413-25-xM
3m, 4m or 5m
LG 240G, 220A @ 60%
K10413-24-xM
3m, 4m or 5m
LG 260G, 260A @ 60%
K10413-26-xM
3m, 4m or 5m
LG 360G, 320A @ 60%
K10413-36-xM
3m, 4m or 5m
LG420G, 380A @ 60%
K10413-42-xM
3m, 4m or 5m
WATER COOLED
DUAL PROCEDURE KITS
Dual Procedure/Memory Panel
User memories work by copying the
weld procedure from one of the six
memories
into either the A or B procedure.
Weld procedures are saved into
the memories
only when the operator chooses.
Item n° : K2360-1 for Power Feed 10M
Semi-automatic Wire Feeders
Dual Procedure Switch
Allows the use of two welding procedures with
one Lincoln gun.
Item n° : K683-1 for LN-10, DH-10, PF 10M
INNERSHIELD GUNS
Lincoln has been manufacturing
semiautomatic flux-cored, self-shielded
(FCAW-S) gun and cable assemblies for over
40 years. Magnum self-shielded guns are
rugged and reliable, yet lightweight, flexible
and maneuverable
450A, 82°, 3mm, 4,6m
Item n° : K115-2
350A, 62°, 1,6mm, 3m
Item n° : K126-1
60
350A, 62°, 1,6mm, 4,6m
Item n° : K126-2
www.lincolnelectric.eu
LG410W, 350A @ 100%
K10413-410-xM
3m, 4m or 5m
LG500W, 500A @ 100%
K10413-500-xM
3m, 4m or 5m
LGS2F ALU, 400A, 100%
K10413-ALU-4M
4m
PUSH-PULL TORCHES
LGPP300G, air cooled
K10413-PPA
8m, standard
K10413-PPAR 8m, with remote ctrl
LGPP400W, water cooled
K10413-PPW
8m, standard
K10413-PPWR 8m, with remote ctrl
Semi-automatic Wire Feeders : options & accessories
STANDS &
UNDERCARRIAGES
LN-25 SOLENOID &
REMOTE CONTROL KITS
Insulated Lift Bail
Allows the entire wire feeder to be hung
from a crane or hook. Use with Heavy Duty
Wire Reel Stand.
Item n° : K1555-1 for LN-10, PF-10
Swivel Platform
Mounts to the lift bail on the power source
and bottom of the Heavy Duty Wire Reel
Stand. Wire feeder may be lifted off if
needed. Compatible with Light Duty Caster
Kit. Includes “lazy susan” parts tray.
Item n° : K1557-1 for LN-10, PF-10
Gas Solenoid Kit
Includes solenoid valve and mounting
bracket.
Item n° : K430-2 for LN-25 (K428, above
code 10500)
42 Volt Remote Output Control Module
Provides remote voltage control and power
source output control. Requires 42 volt
auxiliary power. Mounts inside LN-25
control box.
Item n° : K624-2
Caster Kit – Light Duty
Mounts to the Heavy Duty Wire Reel Stand.
Allows for easy movement of wire feeder.
Item n° : K1556-1 for LN-10, PF-10
WIRE ADAPTORS, COVERS
& STRAIGHTENERS
For Innershield coil
Adapts 10-14 kg Lincoln Readi-Reels to
51mm spindle
Item n° : K363P
For 15-kg Stein Basket
Item n° : K10158-1
Plastic Wire Cover Kit
Plastic enclosure for up to 27.2 kg wire
packages.
Item n° : K1634-1
Wire Straightener
Straightens wire for better, smoother feeding.
Item n° : K1733-1 for LN-10, DH-10,
Power FeedTM 10M, Power FeedTM 10R
Semi-automatic Wire Feeders
Spindle Adaptor for 6kg Innershield® Coil
Permits 6 kg Innershield® electrode coils to
be mounted on 51 mm O.D. spindles.
Item n° : K435
61
www.lincolnelectric.eu
CC/CV
DC
DC-1000
DC-1500
AC-1200
KEY:
Excellent
3
50-815
3
CC/CV DC
150-1300
3
CC/CV DC
200-1500
3
200-1500
3
CC
Good
Warranty (years)
DC-655
Arc gouging
200-1000
Submerged Arc
AC
Flux-Cored
CC/CV
MIG
Power Wave® AC/DC 1000™
TIG scratch
Current
Range
(Amps)
PROCESS
Stick
Polarity
Subarc Welders
62
OUTPUT
Mode
MODEL
AC
Optional
Submerged arc Welding
Submerged arc Process
Welding direction
Contact tip
Shielding atmosphere
Weld pool
Electrode wire
Flux powder
Arc
Slag in fusion
Flux powder
Solidified weld slag
Parent material
Solidified metal
The mechanics of the Submerged Arc Welding process (SAW): Both the
electrode and the base metal are melted beneath a layer of flux. This layer
protects the weld metal from contamination and concentrates the heat
into the joint. The molten flux rises through the pool, deoxidising and
cleaning the molten metal. It then forms a protective slag covering and
maintaining the newly deposited weld.
The range of applications can be anything from 2 mm increasing with no
upper limit. Subarc is one of the most versatile of welding processes. All
steel grades, from non to high alloyed, including Ni-based, can be
welded with a combination of various application techniques.
As a global supplier, including equipment and consumables, Lincoln's
knowledge in the SAW process will support you in reaching the toughest
productivity and quality targets.
Subarc Welders
Ranging from a single electrode-single power source to a combination of
four power sources feeding two wires each, Lincoln is proud to offer an
extensive range of application solutions to the market.
63
Submerged arc Welders
Power Wave AC/DC 1000
®
Increased productivity, quality and flexibility
Submerged Arc
PHASE
3
Hz
M
Parts &
Labour
AN
N
CT
Year warranty
R
IO
LIN
C
N ELEC
OL
E
3 5060
O
Input
AC
DC
IC
TR
Output CC
CV
RF
The machine is designed to be easily paralleled for welding
applications that require higher amperage. Each AC/DC Power
Wave® 1000 provides 1000A of AC or DC output at 100% duty
cycle and can be paralleled to any desired capacity.
Processes
PE
The Power Wave® AC/DC1000 takes submerged arc welding
to the next level. In addition to conventional benefits of SAW,
such as high deposition rates and good penetration,
heightened control and faster responses to the arc are unique
to the design of the Power Wave® AC/DC.
With the Power Wave® AC/DC, you get the best of both worlds
: the speed, deposition rate, and penetration that DC SAW
offers, and the resistance to arc blow that AC SAW offers. In
single arc processes, the Power Wave® AC/DC provides
flexibility with Waveform Control Technology. In multiple arc
processes, that same flexibility is achieved through control of
phase shifting between arcs.
R
CE PLUS P
O
T
Recommended wire feeders
PF10A controller, PF10S head
Order
K2344-2 Power Wave AC/DC 1000
K2444-2 CE filter set
•Eliminate downtime with easy polarity switching—
no hardware reconfiguration required.
• Stable and independent arc controls for multiple arc
applications.
•Improved efficiency and reliability with cooler operation
through patented Coaxial Transformer Technology®.
• 95% power factor correction enables connection of more
machines on the same plant infrastructure for lower
installation costs compared to other machines.
• Remote process monitoring and control through ArcLink®,
Ethernet, and DeviceNet™ communication.
•Consistent operation over ± 10% input voltage variation
through built-in line voltage compensation and reliable input
voltage connection.
• Meet IEC974-1 and CE standards for safety and reliability.
Subarc Welders
Product
Name
Input
Power
Rated Output
Current/Voltage/
Duty Cycle
Fuse
size
Output
Range
Dimensions
HxWxD
(mm)
Net
Weight
(kg)
400/3/50-60
1000A/44V/100%
80A
200-1000A
1110 x 488 x 838
250
Product
Number
Power Wave®
AC/DC 1000 K2344-2
CE
64
www.lincolnelectric.eu
Subarc Welders
DC-655
Energy efficiency multi-process welder
PHASE
Hz
M
Parts &
Labour
AN
R
CE PLUS P
N
IO
LIN
C
3
Year warranty
R
CT
3 5060
E
Input
N ELEC
OL
IC
TR
DC
Output CC
CV
O
• “Idle Shut Down mode” automatically shuts machine off
when not in use to minimise power consumption.
Stick, MIG, Flux-Cored, Submerged Arc,
Gouging
RF
• CC Arc Force Control Knob with built-in “Hot Start”.
Processes
PE
A multi-process power source for state-of-the art welding
operations, featuring extreme energy efficiency for serious
cost-savings.
The DC-655 CE combines ultra reliability with a premium
welding arc. Charging onto the scene with 650 amps at 100%
duty cycle, this DC arc welding power source can handle
multiple welding processes for both CV or CC operation.
The unit has the power to complete even the most demanding
welding jobs.
O
T
Recommended Wire Feeders
LF-37, LF-38, LN-25
NA-3, NA-5, NA-5R
Order
K1610-1 DC-655
• Fan-As-Needed™—solid state thermally controlled cooling
fan operates only when required. Minimises power
consumption, operating noise and dust intake.
• Separate output studs let you choose low or high
inductance.
• Panel switches are behind front latched panel, for remote
or machine panel output control, and output “on” or remote
“on” selection, and CC, CV Subarc or CV MIG mode
selection.
• Low profile case allows stacking machines up to three
high to conserve floor space.
• Electronic and thermal protection from current overload
and excessive temperatures.
Product
Name
DC-655
Product
Number
Input
Power
K1610-1
230/400/3/50/60
Rated Output
Current/Voltage/
Duty Cycle
650A/44V/100%
815A/44V/60%)
Fuse
size
Output
Range
122/70A
50-815A
Max. OCV: 68V (CC)
Dimensions
HxWxD
(mm)
Net
Weight
(kg)
99 x 564 x 965
327
Subarc Welders
• Meet IEC974-1 and CE standards for safety and reliability.
65
www.lincolnelectric.eu
Subarc Welders
DC-1000
Multi-process welder
Processes
Hz
M
N
IO
CT
Parts &
Labour
AN
E
R
O
PHASE
3
Year warranty
RF
3 5060
Input
N ELEC
OL
IC
TR
DC
Output CC
CV
LIN
C
MIG, Flux-Cored, Submerged Arc, Gouging
PE
If your application requires pure welding power combined with
multi-process power, then the DC-1000 CE, with 1300 amps
of smooth DC output, is your best investment.
Designed for Semi-automatic and automatic welding, the
precise control of the DC-1000 CE provides superior MIG, fluxcored, submerged-arc welding, and excellent air carbon arc
gouging.
R
CE PLUS P
O
T
Recommended Wire Feeders
NA-3, NA-5, NA-5R, LT-7
• 500 amp output connections provide enhanced arc
characteristics for low amperage submerged arc and MIG
welding procedures.
Order
K1387-9 DC-1000 with meters
• Single range control for precise output control and easy
operation.
• Terminal strip and output studs for remote connections
and cable.
• Low profile case allows installation of the DC-1000 under a
work-bench and for stacking up to 2 machines to conserve
floor space.
• Removable side panels for easy access to internal parts.
• Line voltage compensation maintains weld consistency,
even with line voltage changes of ±10%.
• Electronic and thermostatic protection from current
overload and excessive temperatures.
• Internal components, including windings, rectifiers and
circuit boards, are coated to protect against the effects of
moisture and corrosion.
• Recessed front panel protects operating controls.
• Meet IEC974-1 and CE standards for safety and reliability.
Subarc Welders
Product
Name
Product
Number
Input
Power
Rated Output
Current/Voltage/
Duty Cycle
K1387-9
230/380/440/3/50-60
1140A/45V/60%
Fuse
size
Output
Range
193/112/97 A
150-1300A
1250A/44V/50%
DC-1000
1000A/44V/100%
66
www.lincolnelectric.eu
Dimensions
HxWxD
(mm)
Net
Weight
(kg)
781 x 572 x 991
372
16-46V
Max. OCV: 60V
Subarc Welders
DC-1500
Multi-process welder DC arc welding power source
PHASE
M
Hz
Parts &
Labour
AN
R
CE PLUS P
N
IO
LIN
C
3
Year warranty
R
CT
3 5060
E
Input
N ELEC
OL
IC
TR
DC
Output CC
CV
O
•Mode switch used to select the desired output
characteristics for the process being used.
Flux-Cored, Submerged Arc, Gouging
RF
• Full range output voltage control for easy operation and
precise output control.
Processes
PE
The DC-1500 is a multi-process DC arc welding power source
for automatic welding applications. It produces outstanding
arc characteristics on both constant voltage and constant
current processes for great welding versatility in a single
power source. A single range full output control potentiometer
provides outstanding welding performance.
O
T
Recommended Wire Feeders
NA-3, NA-5, LT-7
Order
K1383-4 DC-1500
380/440/3/50/60
•Line voltage compensation for maintaining weld
consistency, even with line voltage changes of ±10%.
K1383-5 DC-1500
415/3/50/60
•Fan cooled with electronic and thermostatic protection from
current overload and excessive temperatures.
•Function lights built into the printed circuit boards speed
diagnostics.
•Windings and rectifiers protected against moisture and
corrosive environments.
•Removable side panels for easy access to internal parts.
• Recessed front panel protects operating controls.
• Terminal strip and output studs for remote connections
and cable.
Product
Name
Product
Number
Input
Power
K1383-4
380/440/3/50-60
DC-1500
Rated Output
Current/Voltage/
Duty Cycle
Fuse
size
814A
1500A/60V/100%
K1383-5
415/3/50-60
216A/187A
Output
Range
Dimensions
HxWxD
(mm)
Net
Weight
(kg)
1453 x 566 x 965
644
20-60V
200-1500A
Subarc Welders
• Meet IEC974-1 and CE standards for safety and reliability.
67
www.lincolnelectric.eu
Subarc Welders
AC-1200
Automatic submerged arc welding power source
PHASE
Hz
M
N
IO
CT
Parts &
Labour
AN
R
CE PLUS P
O
T
Recommended Wire Feeders
NA-4
Order
•Rheostat adjusts the output settings while welding or at
idle.
K1382-5 AC-1200
380/1/50/60
•Three output studs with overlapping ranges.
K1382-6 AC-1200
415/1/50/60
•±10% input line voltage compensation for maintaining
weld consistency.
3
Year warranty
R
E
1 5060
O
Input
N ELEC
OL
IC
TR
Output CC AC
LIN
C
Submerged Arc
RF
•Scott® connection taps standard for two AC welding heads
operated in tandem.
Processes
PE
The AC-1200 is the industry’s leading AC power source for
submerged arc welding. It is a power source that you can
count on day-in and day-out to provide proven performance.
The AC-1200 produces outstanding arc characteristics and is
specifically designed for operation with Lincoln’s NA-4
automatic wire feeder.
•Thermostatic protection from current overload and
excessive temperatures.
•Terminal strip for remote control and wire connections and
output studs for welding cables.
• Removable side panels for easy access to internal parts.
•Windings and rectifiers protected against moisture and
corrosive environments.
• Meet IEC974-1 and CE standards for safety and reliability.
Subarc Welders
Product
Name
Product
Number
Input
Power
K1382-5
380/1/50-60
AC-1200
Rated Output
Current/Voltage/
Duty Cycle
Fuse
size
182A
1200A/44V/100%
K1382-6
415/1/50-60
68
www.lincolnelectric.eu
190A
Output
Range
Dimensions
HxWxD
(mm)
Net
Weight
(kg)
1453 x 560 x 970
712
20-60V
200-1500A
Subarc Welders : options & accessories
POWER SOURCES
OPTIONS
Air Filter Kit
Mounts on the front of the machine
and uses cleanable, all metal air
filters. Not compatible with dual
process switch.
Item n° : K1486-1 for DC-655
Digital Meter Kit
Accurately displays welding amps
and volts.
Item n° : K1482-1 for DC-655
Dual Process Switch
Mounts on front of machine and
provides polarity change or electrical
isolation. Great for arc gouging
applications and where two separate
feeders require different output
polarity or inductance settings. Not
compatible with air filter kit.
Item n° : K1528-1 for DC-655
Subarc Welders
42 Volt Transformer Kit
Provides a way to use the LN-10 and
DH-10 wire feeder on a DC-1000
that has 115V AC available on the
terminal strip.
Item n° : K1520-1 for DC-1000
69
www.lincolnelectric.eu
• Ideal For Heavy Duty Hard Automation Applications
• Maximum Control Over Welding Parameters
• Designed To Deposit More Weld Metal At Fast Travel Speeds
-
NA-3
0.6-15.2
0.8-5.6
0.9-4.0
NA-4
Subject to arc
voltage used
0.8-5.6
-
NA-5
0.6-19.7
0.9-5.6
1.2-4.0
•
•
LT-7
2.5-10.2
2.4-4.8
-
•
•
KEY:
Excellent
Good
Optional
•
•
•
3
3
•
•
•
Warranty (years)
1.6-5.6
PW AC/DC 1000
0.25-7.62
Power Feed ™ 10A
AC-1200
Cored
DC-1500
POWER SOURCES
DC-1000
Submerged Arc
WIRE FEED WIRE SIZE
SPEED RANGE RANGE
(mm)
(m/min)
Solid
MIG
Digital
Analog
Flux-Cored
PROCESS
DC-655
MODEL
3
3
3
Automatic Wire Feeders
Power Feed™ 10A
Arclink® controller for Power Wave® AC/DC system
3
Parts &
Labour
AN
R
CE PLUS P
IO
E
M
CT
Year warranty
R
N
IC
TR
40
VDC
O
Input
N ELEC
OL
RF
• Lincoln’s Waveform Control Technology® gives you the
ability to select the right waveform for each application.
Output
PE
• Versatile system set-up options for stand-alone or PLC
configurations help you customise the weld cell to make
your operations as efficient as possible.
Processes
Submerged Arc
LIN
C
TM
The Power Feed 10 A is the main user interface for the
Power Wave AC/DC 1000 subarc cell. The simple functionality
is based on NA5 and PF10. All the welding parameters, timers,
motions, procedure memories, configurations and diagnostics
are accessed from the PF10A controller.
O
T
Recommended Power Source
Power Wave® AC/DC 1000
Order
K2362-1 PF10A controller
K2370-1 PF10SF head
• The Power Feed™ 10A Controller provides clear dual digital
display of set-up and weld modes, six memories, AC
controls, strike/start/end options, travel stop/start, and
timers.
• Controls can be adjusted on-the-fly to change penetration
and/or deposition rates with Variable Frequency, Variable
Amplitude and Variable Balance.
• Easy-to-use switch panel can be removed and used as a
Remote Control Pendant to create a versatile work station
set-up.
• The motor conversion kit allows the use of existing NA-3,
NA-4, and NA-5 feed head mounting hardware.
Product
Name
Product
Number
PF10A
PF10SF
K2362-1
K2370-1
Input Power
40VDC
Wire Feed
Speed
(m/min)
low
high
0,25-5,0 0,6-8,0
Wire Size Range
Range (mm)
Solid
2,0 - 5,6
Dimensions
HxWxD
(mm)
Net
Weight
(kg)
400 x 300 x 150
300 x 250 x 400
5
Automatic Wire Feeders
• Meet IEC974-1 and CE standards for safety and reliability.
71
www.lincolnelectric.eu
Automatic Wire Feeders
NA-3, NA-4, NA-5
Automatic welding systems
MIG, Flux-Cored, Submerged Arc
3
M
Parts &
Labour
AN
R
CE PLUS P
N
Control box NA3-S/NA3-SF
Control box NA-4/NA-4F
K356-2
Control box NA-5
• Rugged construction Minimises downtime and
maintenance costs.
• Meet IEC974-1 and CE standards for safety and reliability.
shown with
options
Automatic Wire Feeders
Product
Name
Wire Feed Speed Range
(m/min)
NA-3
0.6-16.5
subject to arc
voltage used
1.6-5.6
0.9-4.0
NA-4
1.6-5.6
-----
NA-5
0.6-16.5
0.9-5.6
1.2-4.0
www.lincolnelectric.eu
T
K388-2
• Compact units with excellent flexibility to fit into simple
fixtures or the most complex automated production lines.
72
O
Order
K210-2
• Easily adjusted for a wide range of processes, feed
speeds, and wire sizes.
Solid
CT
Year warranty
R
E
VAC
IO
LIN
C
115
O
Input
N ELEC
OL
IC
TR
Output
RF
• Solid state controls allow for precise control of welding
procedures, striking characteristics, as well as bead size
and shape.
Processes
PE
Improve productivity with the NA-3, NA-4 or NA-5 automatic
wire feeders. These systems have been specially designed to
deposit more weld metal at faster travel speeds which
eliminates bottlenecks and cuts costs. Used for heavy duty
fabrication and assembly line production, these units feature
solid state controls for precise control of welding procedures –
even to the most exacting requirements. Trust Lincoln
automatic welding systems for worry-free operation!
Wire Size Range - (mm)
Cored
Automatic Wire Feeders
LT-7 Tractor
Submerged arc DC wire feeder
Improve productivity with the NA-3, NA-4 or NA-5 automatic
wire feeders. These systems have been specially designed to
deposit more weld metal at faster travel speeds which
eliminates bottlenecks and cuts costs. Used for heavy duty
fabrication and assembly line production, these units feature
solid state controls for precise control of welding procedures –
even to the most exacting requirements. Trust Lincoln
automatic welding systems for worry-free operation!
Processes
MIG, Flux-Cored, Submerged Arc
R
CE PLUS P
N
CT
Parts &
Labour
AN
E
M
IO
LIN
C
3
Year warranty
R
O
VAC
RF
Order
K395-2
115
PE
Input
N ELEC
OL
IC
TR
Output
O
T
LT7
• Feeds 2.4-4.8 mm solid wires, from 2.5-10.2 m/min wire
feed speed.
• Calibrated tractor drive adjusts travel speeds from 0.121.8 m/min.
• Vertical head lift adjuster for adjusting electrical stick-out
from 12.7-127.0 mm.
• Weld angle is up to 50° from vertical on either side; drag
angle is up to 30° from vertical.
• Control box can be mounted either left or right,
eliminating the need to return to the power source for
routine procedure changes.
Track model shown
• Welds butts, horizontal fillet and lap joints to the left or
right side of the tractor frame for convenience.
Product
Name
Product
Number
Input
Power
Wire Feed
Speed Range
(m/min)
Wire Size Range
Solid
(mm)
Dimensions
HxWxD
(mm)
Net
Weight
(kg)
LT-7
K395-2
115 VAC
2.5 - 10.2
2.4 - 4.8
698 x 838x 356
54
Automatic Wire Feeders
• Meet IEC974-1 and CE standards for safety and reliability.
73
www.lincolnelectric.eu
Automatic Wire Feeders : options & accessories
GENERAL ACCESSORIES
Vertical head adjuster
Provides 102 mm hand crank adjustment
of vertical head position.
Item n° : K29
Horizontal head adjuster
Provides crank adjustment of head
position. Has 51 mm horizontal travel.
Item n° : K96
Magnetic Flux Screen Separator
For submerged arc welding. Removes
foreign magnetic particles from reused
flux.
Item n° : K58
Travel carriages
TC-3 High Capacity Travel Carriage,
Multiple Heads & Controls (NA-5)
Item n° :
K325HCS 0,1-1,9 m/min
K325HCF 0,4-6,9 m/min
Analog Interface Procedure Control
Optional control box designed to mount
and connect to NA-5 automatic controls
(above code 8300) and the NA-5R.
Item n° : K373 (NA-5 only)
Automatic Wire Feeders
Weld Timer Modules
Permits setting of weld time for an
adjustable period of time. Eliminates need
to press stop button (NA-5 only).
Item n° :
K337-10 (max. time 9.9 seconds)
K337-100 (max. time 99.9 seconds)
Automatic Flux Hopper Assembly
with electric flux valve
Item n° : K219
Remote Interface Module
Permits remote operation of the NA-5 inch
up, inch down, start and stop functions by
either of the following supplied external
signals and provides electrical isolation of
the NA-5 control circuit
Item n° : K336
74
www.lincolnelectric.eu
Start or Crater Module
Permits additional settings of wire feed
speed and voltage for an adjustable
period of time (10 sec. max.)
Item n° : K334
Crater Fill Controls P.C. Board
Adjusts the finishing current and voltage
higher or lower than welding procedures
for an adjustable period of time as
needed to control bead size or fill craters
at the end of the weld.
Item n° : K245 (NA-3/NA-4 only)
Start Controls P.C. Board
Adjusts starting current and voltage
higher or lower than welding procedures
for an adjustable period of time as
needed to control penetration, bead size
or other factors at the start.
Item n° : K221(NA-3/NA-4 only)
WIRE ADAPTORS
Spindle adaptor for Readi-Reels® and
Spools
For fixture and other custom installations.
Features 51mm O.D. spindle for mounting
Readi- Reels and 51mm I.D. spools up to
27.2 kg capacity.
Item n° : K162-1
Wire Reel Assembly to accommodate
22.7 kg or 27.2 kg coils of wire on
automatic wire feeders. Includes a wire
reel mounting spindle and braking
system.
Item n° : K299
Spreadarc™ Oscillator
Designed to oscillate an automatic
welding head for continuous welding at
high duty cycles
Item n° : K278-1
INTERCONNECTION
CABLES
Extension for standard control to head
cable. For K208.
Item n° : K235-xM
3m or 5m
CONTACT NOZZLES
Contact nozzle assembly
Operates at currents generally below 600 A
Item n° :
K231-3/32
K231-1/8
K231-5/32
K231-3/16
(2.4 mm
(3.2 mm
(4.0 mm
(4.8 mm
wire)
wire)
wire)
wire)
Tiny Twinarc kit
Feeds two 1.2 or 1.6 mm electrodes for
high speed submerged arc welds on 14
gauge (1.89 mm) to heavy plate.
Item n° :
K129-1/16
K129-5/64
K129-3/32
(1.6 mm wire)
(2.0 mm wire)
(2.4 mm wire)
Positive Contact Nozzle Assembly
For welding at high currents
Twinarc nozzle
Item n° :
K148A
K148B
Feeds two 2.0 mm, 2.4 mm or (3.2 mm
wires for submerged arc welding on "FastFill" joints or hardfacing bead
Linc-Fill Long Stickout Extension
Linc-Fill long stickout extension for K148A.
Required for long stickout technique
Item n° :
K149-3/32
K149-1/8
K149-5/32
(2.4 mm wire)
(3.2 mm wire)
(4.0 mm wire)
Narrow Gap Deep Groove Nozzle
For 2.4 m diameter wire welding on thick
walled steel plate with nearly parallel-sided,
narrow gap joint preparation
Item n° : K386
Item n° : K225
Concentric Flux Cone Assembly
For use with K148, K129 nozzles. Gives
concentric flux coverage around the
electrode
Item n° : K285 (for use with K129)
Tiny Twinarc® Solid Wire
Straightens wire diameters 1.2 through 2.4
mm. Particularly valuable on longer
electrical stickout procedure
Item n° : K281
Sahara ReadyBagTM
The packaging solution for any
hazardous flux storage conditions
Automatic Wire Feeders
(2.4-3.2 mm wire)
(4.0-4.8 mm wire)
75
www.lincolnelectric.eu
• World’s Most Respected
Pipe Welders
• Built Tough for Extreme
Environments
• More Amperage for
Thicker Materials
• Strong Arc Gouging
Capability
Ranger 305D
Vantage® 400
Vantage® 500
KEY:
Warranty (years)
Arc gouging
Flux-Cored
MIG
DC TIG Touch-Start
Pipe
AC Generator Power
Range
(Watts)
Stick
Current
Range
(Amps)
Polarity
Mode
Engine Driven Welders
76
PROCESS
OUTPUT
MODEL
CC/CV DC
20-305 DC
40-300 Pipe
20-250 DC TIG
8 000
3
CC/CV DC
30-500 DC
40-300 Pipe
20-250 DC TIG
13200
3
CC/CV DC
30-575 DC
40-300 Pipe
20-250 DC TIG
14500
3
Excellent
Good
Optional
Engine Driven Welders
Ranger™ 305D
300A DC diesel engine driven welder
The Ranger 305 D CE is a powerful 300-Amp DC multiprocess diesel engine driven welder. It provides Excellent arc
characteristics in Stick (Conventional or Pipe), TIG, MIG or Arc
Gouging. This Ranger is totally enclosed to protect the 45 litre
fuel tank, water cooled Kubota 18.8 HP D722 diesel engine.
Delivering 8000 Continuous (8500 peak) watts of 230/400V
(115V for the UK model) AC generator power it is obvious this
was designed for welding professionals with high demands.
Processes
Stick, TIG, MIG, Flux-Cored, Gouging
DC
Output CC
CV
3
O
Parts &
Labour
AN
N
CT
RF
Order
•Excellent DC multi-process welding for general purpose
stick, downhill pipe (stick), TIG, cored-wire, MIG (100% CO2
and blended gas) and arc gouging with up to 4.8 mm
carbons.
M
E
PE
Year warranty
R
IO
LIN
C
N ELEC
OL
IC
TR
Input D
R
CE PLUS P
O
T
K2279-1 Ranger 305D
UK model
K2279-2 Ranger 305D
European model
•Lincoln’s® Chopper Technology® provides easy starts,
a smooth arc, low spatter and excellent bead
appearance.
• A portable powerhouse—delivers 10,000 peak (9,500
continuous) watts of 120V/240V AC generator power (115V
for the UK model). Enough power to run lights, tools, or
pumps and weld all at the same time!
• Arc force control provides a soft or more forceful
digging arc.
• Built-in “hot” start for easier starts and restrikes.
• Touch-Start DC TIG®—Lift tungsten to start the arc.
• Fully enclosed case for equipment protection and low
noise.
• Meet IEC974-1 and CE standards for safety and reliability.
Product
Name
Ranger
305D
Rated Output
Current/Voltage/
Duty Cycle
250A/30V/100%
Output
Range
20-305 DC
40-300A Pipe
20-250A TIG
14-29V CV
8500 watts peak
8000 watts continuous
Type
of
Engine
No.
of
Cyl.
HP &
Speed
(rpm)
Dimensions
HxWxD
(mm)
Net
Weight
(kg)
Kubota
D722
Diesel
3
12kW @
3000
909 x 546 x 1327
341
Engine Driven Welders
• Digital meters for amps and volts output make it easy to
precisely set your procedures. Fuel gauge, engine protection
light for oil pressure and engine temperature keep you on
top of monitoring engine performance.
77
www.lincolnelectric.eu
Engine Driven Welders
Vantage
400 CE & Vantage 500 CE
Compact, multi-process, excellent value
®
®
VANTAGE 400
K2502-2
350A/34V/100%
VANTAGE 400 (UK)
K2502-1
400A/30V/60%
VANTAGE 500
K2503-2
400A/36V/100%
VANTAGE 500 (UK)
K2503-1
450A/38V/60%
78
www.lincolnelectric.eu
N ELEC
OL
3
Order
Parts &
Labour
AN
R
CE PLUS P
N
E
M
CT
Year warranty
R
IO
LIN
C
Input D
kW
IC
TR
Rated Output
Current/Voltage/
Duty Cycle
DC
Output CC
CV
O
Product
number
Stick, TIG, MIG, Flux-Cored, Gouging
RF
Engine Driven Welders
Product
Name
Processes
PE
The Vantage® 400 CE and 500 CE are one of the most compact
and powerful engine-driven welders / generators in the
construction, pipe or rental fleet market today. They are also the
most quiet, with a smooth running 4-cylinder Perkins® watercooled diesel engines.
Use these multi-process welders for Stick welding with a large
variety of electrodes, Lift TIG welding, CV welding with shielding
gas or Innershield wires, and arc gouge up to 8 mm carbons for
Vantage 400 and 10 mm carbons for Vantage 500.
You'll value the superior arc performance delivered by exclusive
Lincoln Chopper Technology.
You'll also appreciate VRDTM (Voltage Reduction DeviceTM), which
reduces OCV (open circuit voltage) in the CC-Stick weld mode
for added safety.
• Compact case with stainless steel enclosure.
• Arc gouging up to 8mm (VANTAGE 400) & 10mm
(VANTAGE 500).
• Downhill pipe welding mode. Excellent for cellulosic
electrodes.
• Built-in “hot start” for easier starts and restrikes
• Plenty of AC 50 Hz generator power : 3-phase 400V / 1
phase 230V (& 110V on the UK version).
• Reliable engine 4 cylinder, water cooled, 1500rpm
Perkins Diesel engine.
• Innovative Service Access
• Stainless steel enclosure delivers added
protection and durability.
• Low noise to fit with new European norms.
• Meet IEC974-1 and CE standards for safety and reliability.
O
T
K2502-2 VANTAGE 400 CE
K2503-2 VANTAGE 500 CE
Type
of
Engine
No.
of
Cyl.
HP &
Speed
(rpm)
Dimensions
HxWxD
(mm)
Net
Weight
(kg)
30-400 DC
Diesel
Perkins
404C-22
4
28CV @1500
913 x 642 x 1524
560
30-500 DC
Diesel
Perkins
404C-22 TURBO
4
38CV @1500
913 x 687 x 1590
586
Output
Range
Engine Driven Welders : options & accessories
UNDERCARRIAGE
Large Four-Wheel Yard Trailer
For in-plant and yard towing.
Trailer with Lunette Eye Hitch for
Vantage 400 & Vantage 500
Item n° : K767-2
SECURITY KITS
Spark Arrestor Kit
Attaches to muffler exhaust tube.
Virtually eliminates spark emissions.
Item n° : K903-1 for Vantage 400
& Vantage 500
REMOTE CONTROLS
1 potentiometer, 6 pins, 15m
Item n° : K10195-1-15M
Engine Driven Welders
Extension cable
Item n° : K10398
79
www.lincolnelectric.eu
Plasma cutting Systems
• Cut Any Conductive Material
• Fast, Clean Cutting Compared to Oxy-Fuel
• Great for Hobby, Farm, Autobody or Industry
Excellent
Good
Warranty (years)
Current
Range
(Amps)
Invertec®PC-25
CC
DC
12-25
9
2
Invertec® PC-65
CC
DC
20-65
18
2
Invertec® PC-105
CC
DC
20-105
35
2
Optional
Cutting
thickness
(mm)
Pierce
Polarity
Arc Gouge
PROCESS
Mode
1-Ph
3-Ph
KEY:
OUTPUT
Cut
Plasma Cutting Systems
80
MODEL
Plasma cutting Systems
Invertec Pro-Cut 25
®
Portable cutting power up to 9 mm
The PC25 is one of the best examples of how portable and
easy to use today’s plasma cutters can be. It combines the
next generation of plasma technology and enough power to
cut 9mm mild steel in a package that weighs only 13.4 kg.
Sheet metal and autobody companies will find the PC25
especially easy to use with its back lit LED status lights, 15 ft.
plasma torch, and integral air controls.
Processes
Air plasma cutting, gouging
Output CC DC
Input
1 5060
PHASE
Hz
Base Unit Includes
• 25 amps of cutting power from only a 13.4 kg package
(without cables) for competitive performance on materials up
to 9.5 mm thick.
• Patented PCT 20 torch with VORTECH™ technology
consumables for unmatched cutting speed, precision and
long life.
2m-input cable, 5m-hand cutting torch,
Ground clamp and cable, Air connection
kit, Cutting torch consumables kit.
Order
WF200115
Invertec® PRO-CUT 25
• Automatic re-connection between 115V and 230V for
easy power connection and flexibility.
• Parts-in-Place™ safety indicator and lockout circuit to
safely protect both the operator and the system.
• Can be powered by most Lincoln® engine driven welders
for ultimate portability.
Product
Name
Product
Number
Input
Power
Rated Output
Current/Voltage
Duty Cycle
PRO-CUT 25
WF200115
230/1/50-60
25A/90V/35%
Cutting
Capacity
(mm)
6 @ 56 cm/min
9 @ 23 cm/min
9 @ 23 cm/min
Output
Range
Dimensions
HxWxD
(mm)
12-25 A
254 x 165 x 405
Net
Weight
(kg)
9
Plasma Cutting Systems
• Meet IEC974-1, ROHS and CE standards for safety and
reliability.
81
www.lincolnelectric.eu
Plasma cutting Systems
Invertec PC-65 & PC-105
®
Plasma cutting systems
The Invertec® PC65 & PC105 are Air Plasma cutting systems
for mild steel, stainless steel, aluminium and most other
metals. Based on the latest inverter technology the Invertec®
PC65 incorporates many sophisticated features that enable
the production of high quality cuts over a wide range of
thicknesses up to 18 mm for the PC25 and 35 mm for the
PC105.
A quick connect torch assembly protected against accidental
contact with live parts allows easy switching between hand
and machine torches.
They are supplied ready to cut with all the necessary
accessories including a start up pack of consumables.
Processes
Air plasma cutting, gouging
Output CC DC
Input
3 5060
PHASE
Hz
Base Unit Includes
3m-input cable, 6m-hand cutting torch,
Ground clamp and cable, Air connection
kit, Cutting torch consumables kit.
Order
• The most advanced inverter technology for outstanding
performance and reliability.
K12012-1
Invertec® PC-65
K12013-1
Invertec® PC-105
• Pilot Arc control to maintain an uninterrupted arc when
cutting expanded metal or grates. Stepless current control.
• Output compensated for mains fluctuations.
• Wide range of applications including gouging,
inside corners, pipe saddle cutting and others.
• • Remote control connection (PC105)
• Overload protection and warning light.
• Meet IEC974-1, ROHS and CE standards for
safety and reliability.
Plasma Cutting Systems
Rated Output
Current/Voltage
Duty Cycle
Cutting
Capacity
(mm)
Output
Range
Dimensions
HxWxD
(mm)
Net
Weight
(kg)
400/3/50-60
65A/106V/35%
55A/102V/60%
18
20-65 A
385 x 215 x 586
19
400/3/50-60
105A/122V/35%
80A/112V/60%
35
20-105A
500 x 275 x 711
32
Product
Name
Product
Number
Input
Power
PC 65
K12012-1
K12013-1
PC105
82
www.lincolnelectric.eu
Plasma cutting Systems : options & accessories
CUTTING CIRCLES
UNDERCARRIAGES
Item n° :
2-wheeled cart, delivered as a kit, for
use with PC65
Item n° : W0200002
W0300199A for PC65
W0300194A for PC105
Plasma Cutting Systems
4-wheeled undercarriage with gas
cylinder platform delivered as a kit,
for use with PC105
Item n° : W0200003
83
www.lincolnelectric.eu
Environmental Systems
• Reduces Welding Dust and Fume In The Workplace
• Helps Meet The Latest OSHA Requirements
• Portable, Wall Mounted or Shop-Wide Systems
PROCESS
Start/stop sensor
•
•
•
•
30m
2
•
•
•
•
2
•
•
•
•
•
•
Self-cleaning
Statiflex 200-M
™
Disposable
50m
Statiflex™ 400-MS
Self-cleaning
30m2
Excellent
Good
Optional
Mobile
Single arm
system
Mobile
50m2
Filter indicator
gauge
Size
Disposable
System
Mobiflex™ 200-M
Flux-Cored
•
TIG
•
MIG
12m2
Stick
Disposable
Mobiflex 400-MS
Wall
mount
FEATURES
Miniflex™
™
KEY:
FILTER
Dual arm
system
MODEL
•
•
Environmental Systems : Low Vacuum Solutions
Statiflex & Mobiflex
ProSource LV™ extraction arms position easily to provide high
air flow extraction for a variety of applications. These 203mm
diameter arms and maintenance saving filter systems
combine the finest features in the industry with the best value.
The lightweight arms position easily and hold their place
without drifting. Versatility is a plus with the 360° rotatable
hood, which can be fitted with a lamp kit and an arc sensor
that activates the fan when sensing the arc flash. 3.0m or
3.9m arms are available for both mobile and wall mounted
systems.
• Electronic filter pressure system
monitors internal static pressure
and controls filter cleaning.
• Indicator light for saturated filter.
• RotaPulse® automatic filter
cleaning system.
• Internal aluminium mesh spark
arrestor.
LFA3.1 and LFA4.1 Arms
• Spring balanced for easy positioning.
• 3 & 4 meter lengths.
• 360 degree rotatable hood.
Mobiflex/Statiflex 200M and 400-MS
• Generous 735 CFM airflow with LFA 3.1/4.1
extraction arm.
• Filter efficiency up to 99.8%.
• 50/30 m2 LongLife® filter with ExtraCoat®
pretreatment.
For centralised filtration, choose the Statiflex
6000-MS Central Filter Unit. With a capacity of
6375 m3/h, the Statiflex 6000-MS can provide
filtration for up to four extraction arms in use at
one time.
•Filter surface area 150m2.
• Filter residue container : 100 litres
• For four extraction arms or more, if using the
automatic start/stop sensor.
• Automatic filter cleaning.
• 99.8% efficiency.
• Also for large hoods or downdraft tables.
www.lincolnelectric.eu
Environmental Systems
Statiflex 6000-MS
85
Environmental Systems : High Vacuum Solutions
™
Miniflex
Portable welding fume extractor
Lincoln Electric’s® Miniflex™ is a portable, high vacuum, low
volume system specifically designed for the removal and
filtration of welding fumes. With light duty welding process,
the Miniflex™ excels in performance, design and ease of
handling. It can be used in confined spaces and other
locations that are not accessible with other welding fume
extractors.
Processes
Stick, TIG, MIG, Flux-cored
Input
1 5060
PHASE
Hz
Base Unit Includes
• Well thought-out, user-friendly design.
• Four-stage filtration system with a 99.7% efficiency.
• LongLife-H™ filter technique separates and retains small
particles for maximum efficiency.
• Final filter: HEPA H12 Class.
• Two powerful motors: 1.2 hp each.
• Multiple extraction capacity settings:
- Low: 94 CFM.
- High: 135 CFM.
• Cable sensor allows automatic start/stop capability.
• Low noise level: 70dB(A) with nozzle extraction installed.
• Standard wheels and handle make it easy to roll the
Miniflex™ around the shop.
Environmental Systems
86
www.lincolnelectric.eu
• 3 m cord (AWG 14) with
15 amp plug (NEMA 5-15).
• 2.5 m length x 1-3/4 45 mm O.D.
extraction hose.
• LongLife®-H main filter.
• HEPA filter.
• 2 spare sets of carbon brushes and
seals for motors.
Order
7603001700
Miniflex™
Web Information
www.lincolnelectric.eu
Visit Lincoln Electric Europe on the Worldwide Web:
• Stay up-to-date on the latest
product introductions, news
and
promotions.
• Find the right product for your
application using our on-line
Catalogue and recommended
packages listing.
• Download product literature.
• Locate where to buy Lincoln
products.
• Scan our vast Tech Topics
library including application
stories, “how to” articles,
projects, welding/cutting
theory and FAQs.
• E-Mail your questions to
Lincoln experts.
87
www.lincolnelectric.eu
CUSTOMER ASSISTANCE POLICY
The business of Lincoln Electric Europe is manufacturing and selling high quality welding equipment, consumables and cutting equipment.
Our challenge is to meet the needs of the customer and to exceed their expectations. On occasion, purchasers may ask Lincoln Electric for
advice or information about their use of our products. We respond to our customers based on the best information in our possession at that
time. Lincoln Electric is not in a position to warrant or guarantee such advice and assumes no responsibility, with respect to such information
or advice. We expressly disclaim any warranty of any kind, including any warranty of fitness for any customer’s particular purpose, with
respect to such information or advice. As a matter of practical consideration, we also cannot assume any responsibility for updating or
correcting any such information or advice once it has been given, nor does the provision of information or advice create, expand or alter any
warranty with respect to the sale of our products.
Lincoln Electric is a responsive manufacturer, but the selection and use of specific products sold by Lincoln Electric is solely within the
control of, and remains the sole responsibility of the customer. Many variables beyond the control of Lincoln Electric affect the results
obtained in applying these types of fabrication methods and service requirements.
Subject to change - This information is accurate to the best of our knowledge at the time of printing.
www.lincolnelectric.eu
EC 12-07
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement