High Speed Spread Spectrum Ethernet Radio

High Speed Spread Spectrum Ethernet Radio
RFM products are now
Murata products.
Features:
• High Speed: Up to 400Kbps throughput
• Network Ethernet devices (sensors,
PLCs, computers) wirelessly
• Long Range: 1.5 miles using a 4” unitygain dipole antenna. Easily extended
using gain antennas
• Proven frequency hopping technology
Benefits:
• Excellent immunity to jamming and
multi-path fading
• No user site license required anywhere in
the world
• Allows for deployment in hazardous
locations
• Standard Ethernet 10/100BaseT interface
• Full bandwidth repeaters available
• Packaged for rugged industrial use
SEM2410 Series
SEM2410X
SEM2410D
SEM2410DX
High Speed
Spread Spectrum
Ethernet Radio
Modem Family
The SEM2410 family of products are high speed/long range wireless networking products from Murata. Operating in the globally licensefree 2.4GHz bands, the SEM products are designed to provide high-speed wireless connectivity between Ethernet devices. Typical uses
include Ethernet bridging, SCADA networks, PLC networking, and other industrial automation or data collection applications.
SEM2410D
Rail Mount
The SEM2410D/DX offers a DIN-rail
mount version, making connection to
PLCs or other automation devices a
snap. The entire SEM2410 product family
is Class I Division 2 certified, allowing
deployment in hazardous locations.
SEM2410X/DX
NEMA 4X Remote Assembly
The SEM2410X/DX puts the radio in a
NEMA 4X remote assembly that can be
located up to 300 feet from the Ethernet
connection. This allows optimal radio
placement without the need for long RF
cable runs.
SEM2410 HL
Hazardous Location, Class I Div I
SEM2410 HL (hazardous location)
products are ready to be deployed in
hazardous locations. These Class I Div I
rated solutions are idela for oil and gas
applications. The only access hole that
comes on the box is the antenna
connection on top. The customer then
chooses where to drill for power, data
and/or control conduit access to
maximize installation flexibility.
The SEM 2410 HL products can function
as high speed bridge between two 10/
100BaseT Ethernet networks or provide
wireless connectivity between an
Ethernet master bridge and multiple
Ethernet remote bridges.
SEM products ensure errorless data via
CRC error checking and ARQ (automatic
retransmission of errored packets).
©2010-2015 by Murata Electronics N.A., Inc.
SEM2410 Series (R) 4/23/15
Page 1 of 3
www.murata.com
SEM2410 products use the Murata third generation proprietary frequency hopping technology. Major industrial powerhouses such as Group Schneider,
Siemens, and GE have learned they can depend on Murata products for their customers. SEM products offer extraordinary data throughput combined with
outstanding range, coverage, and link reliability. The SEM series can operate easily in extended range applications - the FCC allows up to 400W EIRP for
2.4 GHz point-to-point radio links.
The SEM2410 series can function as a high speed bridge between two 10/100BaseT Ethernet networks (see figure 1 below). SEM2410 products can also
provide wireless connectivity between an Ethernet base station and multiple Ethernet remote modems (see figure 2). Highly complex networks can be
achieved using repeaters to extend range and coverage. The SEM2410 products offer 400 Kbps throughput, either point-to-point or multi-point. SEM2410
products ensure errorless data via CRC error checking and ARQ (automatic retransmission of errored packets).
Figure 1
Figure 2
©2010-2015 by Murata Electronics N.A., Inc.
SEM2410 Series (R) 4/23/15
Page 2 of 3
www.murata.com
SEM2410
SEM2410X
Data Throughput
SEM2410D
SEM2410D
200 Kbps Full Duplex
Total Available Over-the-air Bandwidth
Interface
460.8 Kbps
10BaseT
10BaseT
Network Topologies
10/100BaseT
10/100BaseT
Point-to-Point and Multipoint
Repeater
Use HN-2010 (see Figure 3)
Frequency Range
(Multiple 803.11b-friendly hopsets
available)
2401MHz - 2471MHz US & ETSI
2409MHz - 2435MHz France
RF Modulation
GFSK
RF Output Power
+8dBm / +18dBm at the RF Connector Software Selectable
Power
Enclosure Material
Enclosure Size
Operating Temperature
+9Vdc - +30Vdc
+12Vdc - +30Vdc
+9Vdc - +30Vdc
+12Vdc - +30Vdc
Aluminum
Aluminum
(network interface unit)
UV stabilized polycarbonate
(remote radio unit)
ABS
ABS
(network interface unit)
UV stabilized polycarbonate
(remote radio unit)
201 x 144 x 53
201 x 144 x 53
(network interface unit)
130 x 79 x 35
(remote radio unit)
140 x 118 x 48
140 x 118 x 48
(network interface unit)
130 x 79 x 35
(remote radio unit)
0ºC to +70ºC
0ºC to +70ºC
(network interface unit)
-40ºC to +70ºC
(remote radio unit)
-30ºC to +70ºC
-30ºC to +70ºC
(network interface unit)
-40ºC to +70ºC
(remote radio unit)
Certifications
FCC, IC, CE Marked, UL Class I Div 2
Power
2-Terminal Connector
Ethernet
RJ-45
Configuration Port
RJ-11
Antenna
Reverse TNC
Figure 3
Power
Ethernet Transmit
Ethernet Receive
Link Status
Collision
RF Link
©2010-2015 by Murata Electronics N.A., Inc.
SEM2410 Series (R) 4/23/15
Page 3 of 3
www.murata.com
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Murata:
SEM2410X SEM2410 SEM2410D SEM2410DX
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising