Ryvyr | CST250WT | Installation guide | RYVYR CST250WT Installation Guide

RYVYR CST250WT Installation Guide
INSTALLATION INSTRUCTIONS
CERAMIC VANITY TOP
INTEGRAL MODELS
ALL SIZES
SUGGESTED TOOLS AND MATERIALS
10'
Silicone Sealant
Level
Tape Measure
Safety Glasses
e
on
lic
Si
nt
ala
Se
Optional Leveling
Spacer (included)
** NOTE: Top style, shape, cutout on top,
and vanity may vary from the picture
above. Instructional purposes only.
VANITY TOP INSTALLATIONS
1. Install the cabinet / vanity according to the cabinet / vanity manufacturer
2. Check to make sure the vanity top sits level on top of the vanity
3. If all four corners of the vanity top do not sift flush on the vanity, use the optional leveling spacers (included) to help level
the vanity top
4. Apply silicone sealant to the top of cabinet / vanity as shown above
5. Install faucet and drain assembly per the manufacturers' instructions
CARE AND CLEANING
For best results in caring for your ceramic vanity top, we suggest:
• Always wipe off spills immediately
• Never use a strong / abrasive cleaner. Always test your cleaning solution on an unnoticeable area before applying it to the
entire surface.
• Wipe surfaces clean, immediately after applying cleaner.
• Do not allow the cleaner to sit or soak. Never let cleaners sit on the surface of the lavatory.
• Use a soft, dampened sponge or cloth. Never use an abrasive material such as a brush or scouring pad to clean surfaces,
they will scratch the lavatory surface.
• Always rinse and wipe clean the fixtures to prevent soap buildup.
10.2014
For customer support please visit www.ryvyr.com or call 866.395.8112 weekdays 8:00 to 5:00 EST or fax 866.395.8113 any time
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising