DJI GO 4 App
Contents
Using this manual
2
Legends
2
Before Flight
2
Watch the video tutorials
2
Download the DJ GO 4 app 2
Download the DJ ASS STANT 2
2
Product Profile
5
ntroduction
6
Feature Highlights
6
Assemble the Aircraft
6
Preparing Remote Controller
8
Aircraft Diagram
Remote Controller Diagram
9
10
Aircraft
12
Flight Controller 13
Flight Mode
13
Flight Status ndicator 14
Return to Home (RTH) 15
TapFly 19
ActiveTrack
21
Tripod Mode
23
Spotlight Pro
23
Vision System and nfrared Sensing System
24
Flight Recorder 28
Attaching and Detaching the Propellers
28
DJ ntelligent Flight Battery
28
Remote Controllers
34
Remote Controller Profile
35
Remote Controller Operations 35
Dual Remote Controllers Mode
40
Remote Controller Status LED
42
Linking the Remote Controller
43
Used with the DJ Focus
44
© 2017 DJI All Rights Reserved
3
INSPIRE 2 Use Manua
Gimbal and Camera
45
Camera
46
Gimbal
47
49
.m
x
Using C NESSD
DJI GO 4 App
om
Camera
Editor
SkyPixel .c
Me
za
Flight
55
55
55
56
57
Flight Limits and No Fly Zones 57
Preflight Checklist
Calibrating the Compass
61
Auto Take off and Auto Landing
62
Starting/Stopping the Motors
62
Stop the Motor Mid flight
63
Flight Test 63
rl
o
sm
en
do
Flight Environment Requirements
60
Appendix
65
66
.c
a
Specifications
Upgrading the Firmware
70
Compliance nformation
72
After Sales nformation
74
w
w
52
w
4 51
© 2017 DJI All Rights Reserved
x
.m
om
Product Profile
w
w
w
.c
a
rl
o
sm
en
do
za
.c
This chapter describes the features of
Inspire 2, instructs you to assemble the
aircraft and explains the components on
the aircraft and remote controllers.
© 2017 DJI All Rights Reserved
5
Product Profile
Introduction
.m
x
The Inspire 2 is a powerful aerial film making system with class leading agility and speed,
redundancy features for maximum reliability, and new, smart features that make capturing complex
shots easy. The camera unit is now independent from image processor so that you have the
flexibility to choose the perfect gimbal and camera system for each of your scenes. Dual frequency
support in the remote controller makes the HD video downlink more efficient and more stable.
Feature Highlights
om
Upgraded TapflyTM and ActiveTrackTM commands in the DJI GO 4 app, the Inspire 2 flies anywhere
visible on-screen with a tap and tracks moving subjects effortlessly.
za
.c
Flight Controller: The flight controller has been updated to provide a safer, more reliable flight
experience. A new flight recorder stores critical data from each flight. A system of visual sensors
enhance hovering precision when flying indoors or in environments where GPS is unavailable. Dual
IMUs and compasses design provides redundancy.
en
do
HD Video Downlink: The low-latency long range (up to 4.3mi (7km)) HD downlink is powered by an
en­hanced version of DJI LIGHTBRIDGETM. Support of 2.4 GHz and 5.8 GHz ensures a more reliable
con­nection in environments with more interference.
rl
o
sm
Camera and Gimbal: The camera unit is now independent from image processor so that you have
the flexibility to choose the perfect gimbal and camera system for each of your scenes. This means
that regardless of which camera you choose, you have the same powerful processing backing
it, and when using the ZENMUSETM X5S, the ability to capture RAW videos. Lossless video (in
CinemaDNG and ProRes format), and DNG RAW photo burst shooting will be available when DJI
CINESSDTM used.
.c
a
Intelligent Flight Battery: The new DJI Intelligent Flight Battery features upgraded battery cells and
an advanced power management system providing up to 25-minutes of flight with a Zenmuse X5S
and 27-minutes with a Zenmuse X4S.
w
Assemble the Aircraft
Un ock ng Trave Mode
w
w
The aircraft is in Travel Mode during delivery. Follow these steps to change it to Landing Mode
before your first flight:
1. Insert the battery pair.
2. Press the power button a minimum of five times.
3. Unfold the landing gear to Landing Mode and power on automatically.
6 © 2017 DJI All Rights Reserved
.c
a
w
w
w
za
do
en
sm
rl
o
om
.c
.m
x
.c
a
w
w
w
za
do
en
sm
rl
o
om
.c
.m
x
.c
a
w
w
w
za
do
en
sm
rl
o
om
.c
.m
x
.c
a
w
w
w
za
do
en
sm
rl
o
om
.c
.m
x
INSPIRE 2 Use Manua
[15 Shutter Button
Press the Shutter Button to take a photo. Photos can also be captured during video recording.
[16 Pause Button
Press once to allow the aircraft to exit from TapFly, ActiveTrack and Advanced mode.
[17 Micro USB Port
Use this port to upgrade the firmware.
x
[18 CAN Bus
Reserved extended port.
.m
[19 HDM A Port
HDMI A Port is for video output.
om
[20 USB Port
Connection to mobile device for DJI GO 4 app.
.c
[21 C1 Button
Customizable through the DJI GO 4 app.
Customizable through the DJI GO 4 app.
w
w
w
.c
a
rl
o
sm
en
do
za
[22 C2 Button
© 2017 DJI All Rights Reserved
11
x
.m
om
Aircraft
w
w
w
.c
a
rl
o
sm
en
do
za
.c
This chapter describes the features of
the Flight Controller, Vision System and
the Intelligent Flight Battery.
.c
a
w
w
w
za
do
en
sm
rl
o
om
.c
.m
x
.c
a
w
w
w
za
do
en
sm
rl
o
om
.c
.m
x
.c
a
w
w
w
za
do
en
sm
rl
o
om
.c
.m
x
INSPIRE 2 Use Manua
Smart RTH
.m
x
Use the RTH button on the remote controller or tap the RTH button in the DJI GO 4 app and
follow the on-screen instructions when GPS is available to initiate Smart RTH. The aircraft will
then automatically return to the last recorded Home Point. Use the remote controller to control the
aircraft’s speed or altitude to avoid a collision during the Smart RTH process. As the aircraft returns,
it will use the primary camera to identify obstacles as far as 300m in front, allowing it to plan a safe
route home. Press and hold the Smart RTH button once to start the process, and press the Smart
RTH button again to terminate the procedure and regain full control of the aircraft.
Low Battery RTH (Can be turned off n DJI GO 4 app)
za
.c
om
The low battery level failsafe is triggered when the DJI Intelligent Flight Battery is depleted to a point
that may affect the safe return of the aircraft. Users are advised to return home or land the aircraft
immediately when prompted. The DJI GO 4 app will display a notice when a low battery warning
is triggered. The aircraft will automatically return to the Home Point if no action is taken after a tensecond countdown. The user can cancel the RTH procedure by pressing the RTH button on the
remote controller. The thresholds for these warnings are automatically determined based on the
aircraft’s current altitude and distance from the Home Point.
do
The aircraft will land automatically if the current battery level can only support the aircraft long
enough to descend from its current altitude. The user can still use the remote controller to alter the
aircraft’s orientation during the landing process.
en
The Battery Level Indicator is displayed in the DJI GO 4 app, and is described below:
.c
a
rl
o
sm
Sufficient battery
Critical Low battery level
level (Green)
warning (Red)
Low battery
Remaining flight time
level warning (Yellow)
Remark
Power requires
to return home
Low battery
level
warning
16 Battery power
is low. Land
the aircraft.
© 2017 DJI All Rights Reserved
12:29
Battery level Indicator
Aircraft Status
ndicator
w
w
w
Battery
Level
Warning
H
Aircraft status
indicator blinks
RED slowly.
DJ GO 4 App
Tap “Go-home” to have the
aircraft return to the Home
point and land automatically,
or “Cancel” to resume normal
flight. If no action is taken,
the aircraft will automatically
go home and land after 10
seconds. Remote controller
will sound an alarm.
Flight
nstructions
Fly the aircraft
back and land
it as soon as
possible, then
stop the motors
and replace the
battery.
.c
a
w
w
w
za
do
en
sm
rl
o
om
.c
.m
x
.c
a
w
w
w
za
do
en
sm
rl
o
om
.c
.m
x
.c
a
w
w
w
za
do
en
sm
rl
o
om
.c
.m
x
.c
a
w
w
w
za
do
en
sm
rl
o
om
.c
.m
x
.c
a
w
w
w
za
do
en
sm
rl
o
om
.c
.m
x
.c
a
w
w
w
za
do
en
sm
rl
o
om
.c
.m
x
.c
a
w
w
w
za
do
en
sm
rl
o
om
.c
.m
x
.c
a
w
w
w
za
do
en
sm
rl
o
om
.c
.m
x
.c
a
w
w
w
za
do
en
sm
rl
o
om
.c
.m
x
.c
a
w
w
w
za
do
en
sm
rl
o
om
.c
.m
x
.c
a
w
w
w
za
do
en
sm
rl
o
om
.c
.m
x
.c
a
w
w
w
za
do
en
sm
rl
o
om
.c
.m
x
INSPIRE 2 Use Manua
om
.m
x
8. Short Circuit Protection: Automatically cuts the power supply when a short circuit is detected.
9.Battery Cell Damage Protection: The DJI GO 4 app displays a warning message when a
damaged battery cell is detected.
10.Sleep Mode: Sleep mode is entered to save power when the aircraft is not flying.
11.Communication: Battery voltage, capacity, current, and other relevant information is provided to
the aircraft’s to the main controller.
12.Pairing Batteries: Powered by two batteries (with battery cells connected in parallel), the Inspire
2 requires the two batteries to have similar properties, e.g. internal resistance. Pairing batteries
in the beginning is recommended. Pairing can be done using the DJI GO 4 app. The DJI GO 4
app will also prompt when batteries that are not paired are in use. The Intelligent Flight Battery
Charging Hub will charge paired batteries simultaneously. Stickers are provided for marking
paired batteries.
13.Heating: Batteries are able to work even in cold weather, ensuring a safe flight. Refer to "Using
the Battery" section for details.
za
.c
Refer to Disclaimer and Intelligent Flight Battery Safety Guidelines before use. Users take
full responsibility for all operations and usage.
Charg ng the Inte gent F ght Battery
sm
en
do
The Inspire 2 Intelligent Flight Battery Charging Hub is designed for use with the Inspire 2 Battery
Charger. It charges up to four Intelligent Flight Batteries simultaneously. The battery pair with more
stored power will be charged first. The Charging Hub will intelligently charge batteries in sequence
according to battery power levels from high to low, if batteries are not paired. Pairing can be carried
out using the DJI GO 4 app. The Micro USB port is used for firmware updates.
Overview
[6]
rl
o
[1]
[8]
[7]
[1] Power Port
[2] Charging Port
[3] Charging Port Cover
[4] Battery Charging Level Indicators
[5] Cover/Battery Release Button
[6] Status LEDs
[7] Firmware Update Port (Micro USB)
[8] Buzzer Switch
w
[3]
[4]
.c
a
[2]
[5]
Connecting to a Power Source
w
w
Connect the standard Inspire 2 Battery Charger to a power outlet (100-240V, 50/60Hz), then
uncover the rubber cover on the power port to connect the Charging Hub to the Inspire 2 Battery
Charger*.
Charging Hub
Charger
Power Outlet
© 2017 DJI All Rights Reserved
29
.c
a
w
w
w
za
do
en
sm
rl
o
om
.c
.m
x
INSPIRE 2 Use Manua
Charging Protection LED Display
The table below shows battery protection mechanisms and corresponding LED patterns.
Battery Level ndicators for Battery Protection
LED4 Blinking Pattern
Battery Protection tem
Over current detected
LED2 blinks three times per
second
Short circuit detected
LED3 blinks twice per second
Over charge detected
LED3 blinks three times per
second
Over-voltage charger detected
LED4 blinks twice per second
Charging temperature is too
low (<0°C)
Charging temperature is too
high (>40°C)
za
LED4 blinks three times per
second
x
LED2 blinks twice per second
.m
LED3
om
LED2
.c
LED1
en
do
After any of the above mentioned protection issues are resolved, press the button to turn off the
Battery Level Indicator. Unplug the Intelligent Flight Battery from the charger and plug it back in to
resume charging. Note that you do not need to unplug and plug the charger in the event of a room
temperature error, the charger will resume charging when the temperature falls within the normal
range.
sm
DJI does not take any responsibility for damage caused by third-party chargers.
.c
a
rl
o
How to discharge the ntelligent Flight Battery before transport the batteries for long trip:
Fly the aircraft outdoors until there is low battery power left, or until the battery can no
longer be turned on.
Buzzer Beeping Description
Toggle the buzzer switch to turn on/off the warning sound.
Beeping Pattern
Connect to the Battery Charger
Quick beeping
A battery pair is fully charged
Quick beeping
w
Descriptions
w
w
Toggle the buzzer switch to turn it on
Four Intelligent Flight Batteries are fully charged
Quick beeping
Alternating two short and one long beeps,
last for about 1 hour
Updating the Firmware
DJI will release firmware updates when available. Refer to the official DJI website and follow the
instructions below to update the firmware.
1. Download the latest firmware update program from the official DJI website.
(http://www.dji.com/inspire-2/info#downloads)
© 2017 DJI All Rights Reserved
31
.c
a
w
w
w
za
do
en
sm
rl
o
om
.c
.m
x
.c
a
w
w
w
za
do
en
sm
rl
o
om
.c
.m
x
.c
a
w
w
w
za
do
en
sm
rl
o
om
.c
.m
x
.c
a
w
w
w
za
do
en
sm
rl
o
om
.c
.m
x
.c
a
w
w
w
za
do
en
sm
rl
o
om
.c
.m
x
.c
a
w
w
w
za
do
en
sm
rl
o
om
.c
.m
x
.c
a
w
w
w
za
do
en
sm
rl
o
om
.c
.m
x
.c
a
w
w
w
za
do
en
sm
rl
o
om
.c
.m
x
.c
a
w
w
w
za
do
en
sm
rl
o
om
.c
.m
x
INSPIRE 2 Use Manua
In Dual Controller Mode, when the Master remote controller is primary, it can control
gimbal pitch and pan. When the Slave remote controller is primary, it can control gimbal
pitch, pan and roll.
Dual Remote Controller mode is not available in Russia and Israel.
Sett ng Up Dua Remote Contro ers Mode
.m
x
Dual Remote Controllers mode is disabled by default. Users must enable this feature on the “Master”
remote controller by through the DJI GO 4 app. Follow the steps below for setup:
“Master” Remote Controller
za
Remote Controller Settings
Master and Slave
do
Set Remote Controller Status
OFF
Master
Slave
Slave D: 14f93f
en
Master ID: 28172d
Authorization Code:
666666
sm
Connection Status ON
.c
om
1. Connect the remote controller to your mobile device and launch the DJI GO 4 app.
2. Go to the Camera page, and tap
to enter the remote controller settings window.
3. Select “Master” set the remote controller as “Master” remote controller.
4. Enter the connection password for the “Slave” remote controller.
Remote Controller Calibration
rl
o
“Slave” Remote Controller
.c
a
1. Select “Slave”to set the remote controller as “Slave” remote controller.
Remote Controller Settings
w
w
w
Master and Slave
Set Remote Controller Status
Master ID: 28172d
OFF
Master
Slave
Slave D: 14f93f
Connection Status:OFF
Search Master
Remote controller cannot link to the aircraft if the remote controller is set as “Slave”.
Meanwhile, the “Slave” remote controller cannot control the orientation of the aircraft. Reset
the remote controller to “Master” in DJI GO 4 app if you wish to link the remote controller to
the aircraft.
© 2017 DJI All Rights Reserved
41
.c
a
w
w
w
za
do
en
sm
rl
o
om
.c
.m
x
.c
a
w
w
w
za
do
en
sm
rl
o
om
.c
.m
x
.c
a
w
w
w
za
do
en
sm
rl
o
om
.c
.m
x
x
.m
om
Gimbal and Camera
w
w
w
.c
a
rl
o
sm
en
do
za
.c
This chapter provides the technical
specifications of the camera and explains
the working mode of the gimbal.
Camera and Gimbal
Camera
Camera Profi e
.m
x
Featuring M4/3 CMOS sensor, the Zenmuse X5S supports up to 20.80 MP still photo capture. It is
capable of capturing 5.2K 30fps CinemaDNG video and Apple ProRes Video as well as 4K 60fps
using H.264. The Zenmuse X5S is built using the M4/3 interchangeable lens standard. A variety
of shooting modes, including single shooting, burst shooting and interval shooting, provide more
options of capture. Burst and AEB is available, with up to 14 stills.
om
When the DJI CINESSD is in use, the Zenmuse X5S is able to record lossless videos with a bitrate
of 5.2 Gbps in the CinemaDNG format or capture DNG stills at 20fps continuously.
za
.c
When mounted on the Inspire 2, the 3-axis gimbal provides a stable platform for the camera to get clear
shots even during rapid maneuvering. The gimbal tilts the camera across a -130° to +40° pitch angle
and pans ± 320° in both directions. Live HD video from the camera is streamed to the DJI GO 4 app.
Camera M cro SD Card S ot
.c
a
rl
o
sm
en
do
To store your photos and videos, plug in the Micro SD card into the slot shown below before
powering on the Inspire 2. The Inspire 2 comes with a 16GB Micro SD card and supports up to a
128GB Micro SD card. A UHS-3 type Micro SD card is recommended, because the fast read and
write capability of these cards enables you to store high-resolution video data.
w
w
w
The Inspire 2 currently supports the following Micro SD cards, and will continue to support
more cards in future.
Sandisk Extreme 32GB UHS-3 MICROSDHC
Sandisk Extreme 64GB UHS-3 MICROSDXC
Panasonic 32GB UHS-3 MicroSDHC
Panasonic 64GB UHS-3 MicroSDXC
Samsung PRO 32GB UHS-3 MicroSDHC
Samsung PRO 64GB UHS-3 MicroSDXC
Samsung PRO 128GB UHS-3 MicroSDXC.
Do not remove Micro SD card from the Inspire 2 when it is powered on.
To ensure the stability of the camera system, single video recordings are capped at 30
minutes.
46 © 2017 DJI All Rights Reserved
INSPIRE 2 Use Manua
USB Port
Camera Operat on
.c
Remote Controller
om
Power on the aircraft before attempting to download the files.
.m
x
Power on the Inspire 2 and then connect a USB cable to the USB port to download photos or videos
from the Inspire 2 to your computer.
za
Use the Shutter and Record button on the remote controller to shoot the images or the videos. For
more information about how to use these buttons, refer to “Controlling Camera”.
do
DJ GO 4 app
en
Use the DJI GO 4 app to shoot the images or the videos. For more information, refer to “Zenmuse
X5S User Manual”.
sm
Gimbal
G mba Profi e
+20°
+40°
0°
-130°
-320°
-20°
w
w
w
.c
a
rl
o
The 3-axis Gimbal provides a steady platform for the attached camera, allowing you to capture
stabilized images and video.
+320°
Us ng DJI GO 4 App to Contro G mba
Follow the steps below to use DJI GO 4 app to control the gimbal orientation:
1. Launch DJI GO 4 app, enter camera page.
2. Tap and press on the screen until a blue circle is shown.
3. Slide to control the gimbal orientation within the “Camera” page as shown below.
© 2017 DJI All Rights Reserved
47
.c
a
w
w
w
za
do
en
sm
rl
o
om
.c
.m
x
.c
a
w
w
w
za
do
en
sm
rl
o
om
.c
.m
x
INSPIRE 2 Use Manua
3.When connected, an icon named “DJI_A” followed by a number sequence will appear. Click to
start the file export.
4. Safely remove the station before unplugging it from your computer.
.m
om
DO NOT remove the CINESSD when it is powered on.
Insert the CINESSD before connecting the station to the computer.
The station icon will vary based on your computer operating system.
x
No additional software is required for exporting data from the CINESSD. You may also use
the following DJI software based on your system.
Windows: DJI Camera Exporter.
Mac: DJI CINELIGHTTM.
Deleting Files
za
.c
To guarantee the high performance of the DJI CINESSD, the station only supports file exporting. To
delete files, please insert the CINESSD into the aircraft and launch the DJI GO 4 app to format the
CINESSD to free up storage space.
do
Ensure to back up your files before formatting the DJI CINESSD.
Spec ficat ons
120 GB*/ 240 GB/ 480 GB
en
Capacity
Size
105.5 mm×27 mm×7 mm
sm
Weight
42.5 g
32° to 104° F (0° to 40° C)
Storage Temperature Range
-40° to 185° F (-40° to 85 ℃)
Humidity
5% to 95%, non-condensing
rl
o
Operation Temperature Range
w
w
w
.c
a
* The 120G CINESSD does not support 5.2K 30fps or 4K 60fps CinemaDNG videos.
50 © 2017 DJI All Rights Reserved
x
.m
om
DJI GO 4 App
w
w
w
.c
a
rl
o
sm
en
do
za
.c
This chapter describes the four main
GUI of the DJI GO 4 app.
.c
a
w
w
w
za
do
en
sm
rl
o
om
.c
.m
x
.c
a
w
w
w
za
do
en
sm
rl
o
om
.c
.m
x
.c
a
w
w
w
za
do
en
sm
rl
o
om
.c
.m
x
.c
a
w
w
w
za
do
en
sm
rl
o
om
.c
.m
x
x
.m
om
Flight
w
w
w
.c
a
rl
o
sm
en
do
za
.c
This chapter describes the flight safety
and flight restrictions.
.c
a
w
w
w
za
do
en
sm
rl
o
om
.c
.m
x
.c
a
w
w
w
za
do
en
sm
rl
o
om
.c
.m
x
.c
a
w
w
w
za
do
en
sm
rl
o
om
.c
.m
x
.c
a
w
w
w
za
do
en
sm
rl
o
om
.c
.m
x
INSPIRE 2 Use Manua
Calibrating the Compass
Only calibrate the compass when the DJI GO 4 app or the status indicator prompt you to do so.
Observe the following rules when calibrating your compass:
om
.m
x
DO NOT calibrate your compass where there is a chance of strong magnetic interference,
such as magnetite, parking structures, and steel reinforcements underground.
DO NOT carry ferromagnetic materials with you during calibration such as cellular phones.
The DJI GO 4 app will prompt you to resolve the compass issue if the compass is affected
by strong interference after calibration is complete. Follow the prompted instructions to
resolve the compass issue.
Ca brat on Procedures
rl
o
sm
en
do
za
.c
Choose an open area to carry out the following procedures.
1.Tap the Aircraft Status Bar in the app and select “Calibrate”, then follow the on-screen
instructions.
2. Hold the aircraft horizontally and rotate 360 degrees. The Aircraft Status Indicators will display a
solid green light.
w
w
w
.c
a
3. Hold the aircraft vertically, with nose pointing downward, and rotate it 360 degrees around the
center axis. Recalibrate the compass if the Aircraft Status Indicator glows blinking red.
© 2017 DJI All Rights Reserved
61
.c
a
w
w
w
za
do
en
sm
rl
o
om
.c
.m
x
.c
a
w
w
w
za
do
en
sm
rl
o
om
.c
.m
x
INSPIRE 2 Use Manua
When the Aircraft Status Indicators blink yellow rapidly during flight, the aircraft has entered Failsafe
mode.
A low battery level warning is indicated by the Aircraft Status Indicators blinking red slowly
or rapidly during flight.
Watch our video tutorials for more flight information.
x
V deo Suggest ons and T ps
w
w
w
.c
a
rl
o
sm
en
do
za
.c
om
.m
1. Go through the full pre-flight checklist before each flight.
2. Select the desired gimbal operation mode in the DJI GO 4 app.
3. Only shoot video when flying in P-mode.
4. Always fly in good weather and avoid flying in rain or heavy wind.
5.Choose the camera settings that suit your needs. Settings include photo format and exposure
compensation.
6. Perform flight tests to establish flight routes and preview scenes.
7. Push the control sticks gently to keep the aircraft’s movement smooth and stable.
64 © 2017 DJI All Rights Reserved
.c
a
w
w
w
za
do
en
sm
rl
o
om
.c
.m
Appendix
x
.c
a
w
w
w
za
do
en
sm
rl
o
om
.c
.m
x
INSPIRE 2 Use Manua
FOV
72° (w th DJI MFT 15mm/1.7 ASPH )
4:3, 5280×3956
Photo Resolutions
16:9, 5280×2970
H.264
C4K: 4096×2160 23.976/24/25/29.97/47.95/50/59.94p @100Mbps
4K:
3840×2160 23.976/24/25/29.97/47.95/50/59.94p @100Mbps
.m
47.95/50/59.94p @100Mbps
FHD: 1920×1080 23.976/24/25/29.97p @60Mbps
x
3840×1572 23.976/24/25/29.97p @100Mbps
2.7K: 2720×1530 23.976/24/25/29.97p @80Mbps
om
47.95/50/59.94p @80Mbps 119.88p @100Mbps
H.265
C4K: 4096×2160 23.976/24/25/29.97p @100Mbps
3840×2160, 3840×1572 23.976/24/25/29.97p @100Mbps
.c
4K:
Video Resolutions
2.7K: 2720×1530 23.976/24/25/29.97p @65Mbps
za
47.95/50/59.94p @80Mbps
FHD: 1920×1080 23.976/24/25/29.97p @50Mbps
do
47.95/50/59.94p @65Mbps 119.88p @100Mbps
C-DNG RAW
5.2K: 5280×2972 23.976/24/25/29.97p, up to 4.2Gbps
4096×2160, 3840×2160 23.976/24/25/29.97p, up to 2.4Gbps
4K:
4096×2160, 3840×2160 50/59.94p, up to 4.0Gbps ProRes
en
4K:
5.2K: 5280×2160 23.976/24/25/29.97p, 422 HQ @1.3Gbps
sm
3840×2160 23.976/24/25/29.97p, 4444 XQ @2.0Gbps
Micro SD: DNG, JEPG, DNG+JEPG
rl
o
.c
a
Operation Modes
3840×2160 23.976/24/25/29.97p, 422 HQ @900Mbps
4K:
SSD: DNG
Photo Formats
Video Formats
4K:
w
Still Photography Modes
SSD: CinemaDNG, ProRes
Micro SD: MOV, MP4
Capture, Record, Playback
Micro SD: Single shot, Burst shooting (3/5/7/10/14 frames), Auto
Exposure Bracketing (3/5 bracketed frames at 0.7EV bias), Interval
SSD: RAW BURST (3/5/7/10/14/∞ frames)
Auto, Manual, Shutter Prior ty, Aperture Priority
Exposure Compensation
±3.0 (1/3 increments)
Metering Mode
Center-weighted metering, Spot metering (area option 12×8)
w
w
Exposure Mode
AE Lock
Supported
Electronic Shutter Speed
8-1/8000s
White Balance
ISO Range
Video Captions
Auto, Sunny, Cloudy, Incandescent, Neon
Custom (2000K–10000K)
100 – 6400 (Video)
100 – 25600 (Stills)
Supported
© 2017 DJI All Rights Reserved
67
.c
a
w
w
w
za
do
en
sm
rl
o
om
.c
.m
x
.c
a
w
w
w
za
do
en
sm
rl
o
om
.c
.m
x
.c
a
w
w
w
za
do
en
sm
rl
o
om
.c
.m
x
INSPIRE 2 Use Manua
Upgrad ng the Remote Contro er F rmware
Method 1 Using the DJ GO 4 App
Power on the remote controller and connect it with the DJI GO 4 app. A prompt will appear if a new
firmware upgrade is available. To start upgrading, connect a mobile device to the Internet and
follow the on-screen instructions.
w
w
w
.c
a
rl
o
sm
en
do
za
.c
om
.m
x
The firmware update will take around 15 minutes. It is normal that the gimbal will go limp,
the aircraft status indicator blinks abnormally and the aircraft reboots. Wait patiently until
the update is complete.
Ensure the computer has access to the Internet.
Ensure the battery level is adequate for the remote controller.
Do not disconnect the aircraft from the computer during firmware upgrade.
© 2017 DJI All Rights Reserved
71
INSPIRE 2 Use Manua
Compliance Information
FCC Comp ance Not ce
.m
x
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This device must accept
any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
za
.c
om
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
sm
RF Exposure Informat on
en
do
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
— Consult the dealer or an experienced radio/TV technician for help.
rl
o
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits,
human proximity to the antenna shall not be less than 20cm during normal operation.
IC Rad at on Exposure Statement:
w
w
w
.c
a
This equipment complies with IC RF radiation exposure limits set forth for an uncontrolled
environment. This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
This equipment should be installed and operated with minimum distance 20cm between the
radiator& your body.
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
KCC Warn ng Message
“해당무선설비는 운용 중 전파혼신 가능성이 있으므로 인명안전과 관련된 서비스는 할 수 없습니다 .”
“해당 무선설비는 운용 중 전파혼신 가능성이 있음”
NCC Warn ng Message
低功率電波輻射性電機管理辦法
第十二條 經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅自變更頻率、
加大功率或變更原設計之特性及功能。
72 © 2017 DJI All Rights Reserved
INSPIRE 2 Use Manua
第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應改善至
無干擾時方得繼續使用。前項合法通信,指依電信法規定作業之無線電通信。低功率射頻電機須忍受
合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
.m
x
EU Compliance Statement: SZ DJI TECHNOLOGY CO., LTD. hereby declares that this device is in
compliance with the essential requirements and other relevant provisions of the Directive 1999/5/
EC.
A copy of the EU Declaration of Conformity is available online at www.dji.com/euro-compliance
.c
om
Declaración de cumplimiento UE: SZ DJI TECHNOLOGY CO., LTD. por la presente declara que
este dispositivo cumple los requisitos básicos y el resto de provisiones relevantes de la Directiva
1999/5/EC.
Hay disponible online una copia de la Declaración de conformidad UE en www.dji.com/eurocompliance
do
za
EU-verklaring van overeenstemming: SZ DJI TECHNOLOGY CO., LTD. verklaart hierbij dat dit
apparaat voldoet aan de essentiële vereisten en andere relevante bepalingen van Richtlijn 1999/5/
EC.
De EU-verklaring van overeenstemming is online beschikbaar op www.dji.com/euro-compliance
sm
en
Declaração de conformidade da UE: A SZ DJI TECHNOLOGY CO., LTD. declara, através deste
documento, que este dispositivo está em conformidade com os requisitos essenciais e outras
disposições relevantes da Diretiva 1999/5/EC.
Existe uma cópia da Declaração de conformidade da UE disponível online em www.dji.com/eurocompliance
.c
a
rl
o
Dichiarazione di conformità UE: SZ DJI TECHNOLOGY CO., LTD. dichiara che il presente
dispositivo è conforme ai requisiti essenziali e alle altre disposizioni rilevanti della direttiva 1999/5/
EC.
Una copia della dichiarazione di conformità UE è disponibile online all'indirizzo Web www.dji.com/
euro-compliance
w
w
w
Déclaration de conformité UE : Par la présente, SZ DJI TECHNOLOGY CO., LTD déclare que cet
appareil est conforme aux principales exigences et autres clauses pertinentes de la directive
européenne 1999/5/EC.
Une copie de la déclaration de conformité UE est disponible sur le site www.dji.com/eurocompliance
EU-Compliance: Hiermit erklärt SZ DJI TECHNOLOGY CO., LTD., dass dieses Gerät den
wesentlichen Anforderungen und anderen einschlägigen Bestimmungen der EU-Richtlinie 1999/5/
EC entspricht.
Eine Kopie der EU-Konformitätserklärung finden Sie online auf www.dji.com/euro-compliance.
EU contact address: DJI GmbH, Industrie Strasse. 12, 97618, Niederlauer, Germany
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE
OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
© 2017 DJI All Rights Reserved
73
INSPIRE 2 Use Manua
Environmentally friendly disposal
Old electrical appliances must not be disposed of together with the residual waste, but have to be
disposed of separately. The disposal at the communal collecting point via private persons is for
free. The owner of old appliances is responsible to bring the appliances to these collecting points
or to similar collection points. With this little personal effort, you contribute to recycle valuable raw
materials and the treatment of toxic substances.
Mex co Warn ng message
“La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este
equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar
cualquier interferencia, incluyendo la que pueda causar su operación no deseada.”
Tha and Warn ng message
เครื่องโทรคมนาคมและอุปกรณ์นี้ มีความสอดคล้องตามข้อกำ�หนดของ กทช.
After-Sales Information
Visit the following pages to learn more about After-sales policy and warranty information:
1. After-sales Policy: http://www.dji.com/service
2. Refund Policy: http://www.dji.com/service/refund-return
3. Paid Repair Service: http://www.dji.com/service/repair-service
4. Warranty Service: http://www.dji.com/service/warranty-service
74 © 2017 DJI All Rights Reserved
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising