Sony ICD-UX70 User manual

3-274-294-72(1)
Getting Started
IC Recorder
Operating Instructions
Basic Operations
Various Recording Modes
Playback/Erasing
Editing Messages
Utilizing the Menu Function
Utilizing Your Computer
Troubleshooting
Additional Information
Index
ICD-UX60/UX70/UX80
© 2007 Sony Corporation
GB
Table of Contents
Checking the contents of the
package................................................................5
Index to Parts and Controls......................6
Getting Started
Step 1: Preparing a Power Source........11
Inserting the battery...........................11
When replacing the battery...........12
Step 2: Setting the Clock............................13
Basic Operations
Playback/Erasing
Playing Back Messages................................23
Adjusting the playback speed
– DPC (the Digital Pitch Control
function)......................................................26
Playing back a specified section
repeatedly – A-B Repeat...................27
Playing Back a Message at a Desired
Time with an Alarm.......................................27
Erasing Messages...........................................29
Erasing messages one by one.......30
Erasing all messages in a
folder.............................................................30
Recording Messages....................................15
Editing Messages
Various Recording Modes
Moving Message to a Different
Folder.....................................................................31
Starting to Record Automatically in
Response to Sound – the VOR
Function...............................................................19
Recording with an External
Microphone.......................................................20
Recording from Other Equipment......21
Recording sound from a
telephone or a cell phone...............22
Utilizing the Menu Function
Making Settings for the Menu................32
GB
Utilizing Your Computer
Troubleshooting
Using the IC Recorder with Your
Computer............................................................41
System requirements..........................41
Connecting the IC recorder to
your computer........................................41
Disconnecting the IC recorder
from the computer...............................42
Using Voice Recognition Software......43
Introducing the voice recognition
software.......................................................43
Creating a user file adapted to
your recorded speech
(Training).....................................................44
Playing Back Transferred MP3 Files
Using the IC Recorder..................................45
Construction of folders and
files..................................................................46
Using the IC Recorder as a USB Mass
Storage Device.................................................48
Troubleshooting..............................................49
Error messages........................................52
System limitations.................................54
GB
Additional Information
Recording with Other Equipment.......55
Precautions.........................................................56
Specifications....................................................57
Index.......................................................................59
Checking the contents
of the package
IC Recorder (1)
Carrying pouch (1)
Operating Instructions
You are cautioned that any changes or
modifications not expressly approved in
this manual could void your authority to
operate this equipment.
LR03 (size AAA) alkaline battery (1)
Stereo headphones (1)
USB connection support cable (1)
GB
Index to Parts and
Controls
Rear
Refer to the pages indicated in
parentheses for details.
Front
Operation indicator (13, 15, 16, 23, 38)
Built-in microphones (stereo) (15)
Display window (8)
Control key (, /VOL (volume) +,
VOL –)/ENT (enter) button*1
 (folder)/MENU button (15, 23, 30,
31, 32, 45)
 (headphone) jack*2 (15, 17, 23, 24,
55)
 (microphone) jack (20, 21)
 (record/pause) button (15, 16, 19,
35)
GB
 (stop) button (16, 24, 25, 28, 31, 32)
 (cue/fast forward) button (23, 24,
25)
 (play/stop) button (16, 23, 25)
 (review/fast backward) button
(16, 23, 24, 25)

(repeat) A-B button (23, 27)
HOLD switch*3
*1 How to use the control key
Press the key toward the left or right to
adjust the volume.
Also use the key to change the menu
settings or to select a folder. In the
menu setting window or folder selection
window, press the key upward or
downward to select the item or the folder
you want, and then press the center of the
key (ENT) to confirm the setting.
DPC switch (23, 26, 36)
Opening for a handstrap (A
handstrap is not supplied.)
USB cap
Speaker
Battery compartment (11)
*2 Connect the supplied or commercially
available stereo headphones to the 
(headphone) jack. If unwanted noise is
heard, wipe the headphones plug clean.
GB
*3 When you slide the HOLD switch in
the direction of the arrow in the stop
mode, the IC recorder turns off within a
few seconds. To turn the IC recorder on,
slide the HOLD switch in the opposite
direction from that of the arrow. During
recording and playback slide the switch
in the direction of the arrow to lock all the
functions of all the buttons so that you can
prevent inadvertent operations.
Display window
Operation mode indicator
Displays the following, depending on
the current operation mode
: stop
: playback
: recording
: recording standby/recording
pause
: recording with the VOR
function
: recording pause with the
VOR function (flashing)
If you press  (record/pause) to
pause recording when “VOR” is set to
“开” in the menu, only “
” flashes.
GB
: review/fast backward,
cue/fast forward
: going backward/forward
continuously
 Folder name/ Message title
name/ Artist name indication
Press the control key toward  or 
to display a folder name, message
title name, and artist name in
sequence.
Elasped time/Remaining time/
Recording date and time indication
Selected message number/Total
number of messages in the folder
Microphone sensitivity indicator
Displays the microphone sensitivity.
(high) : To record at a meeting or
in a quiet/spacious place.
(low) : To record for dictation or in
a noisy place.
Alarm indicator
Appears when the alarm is set for a
message.
Recording mode indicator
Displays the recording mode set
using the menu when the IC recorder
is in the stop mode, and displays
the current recording mode when
the IC recorder is in the playback or
recording mode.
: Standard play stereo recording
mode with high quality sound
: Standard play stereo recording
mode
: Long play stereo recording
mode
: Standard play monaural
recording mode
: Long play monaural recording
mode
Remaining battery indicator
When a dry battery is used, the
indicator shows the remaining
battery power.
GB
Remaining recording time indication
Displays the remaining recording
time in hours, minutes, and seconds.
If there is more than 10 hours time
remaining, the time is displayed in
hours.
If there is more than 10 minutes and
less than 10 hours time remaining,
the time is displayed in hours and
minutes.
If there is less than 10 minutes time
remaining, the time is displayed in
minutes and seconds.
10
GB
Getting Started
Inserting the battery
1 Slide and lift the battery
compartment lid.
Do not use manganese battery for this IC
recorder.
Getting Started
Step 1: Preparing a
Power Source
 Note
Clock setting display appears and the
year section flashes when you insert
battery for the first time, or when you
insert battery after the IC recorder has
been without battery for a certain period
of time. Please refer to step 3 in “Step 2:
Setting the Clock” on page 14 to set the
date and time.
2 Insert one LR03 (size AAA) alkaline
battery with correct polarity, and
close the lid.
11
GB
When replacing the battery
The remaining battery indicator on the
display shows the battery condition.
Battery remain indication
: Replace the old battery with a new
one.

: “电量不足“ appears and the IC
recorder will stop operation.
Battery life*1
When using Sony LR03 (SG) (size AAA)
alkaline battery
Recording
mode
Recording
ST
*3
STSP
*4
Approx. 9 hr. Approx. 9 hr.
30 min.
30 min.
Approx. 14 hr. Approx. 14 hr.
Playback*2
through
speaker
Playback
Approx. 30 hr. Approx. 30 hr.
using the
headphones
12
GB
Recording
mode
Recording
Playback*2
through
speaker
Playback
using the
headphones
STLP*5
Recording
mode
LP*7
SP*6
Approx. 11 hr. Approx. 10 hr.
Approx. 14 hr. Approx. 14 hr.
30 min.
30 min.
Approx. 32 hr. Approx. 32 hr.
Music file
(128 kbps/
44.1 kHz)
Recording Approx. 12 hr. –
Playback*2
Approx. 15 hr. Approx. 14 hr.
through
speaker
Playback
Approx. 34 hr. Approx. 30 hr.
using the
headphones
(hr. : hours/min. : minutes)
The battery life may shorten depending on
how you operate the IC recorder.
*2
When playing back music through the
internal speaker with the volume level set to
22
*3
ST : Stereo high quality recording mode
*4
STSP : Stereo standard recording mode
*5
STLP : Stereo long play recording mode
*6
SP : Monaural standard play recording mode
*1
LP : Monaural long play recording mode
*7
Note while accessing
 Note
If the IC recorder is required to process a large
amount of data, an updating animation may
be displayed for an extended period of time.
This is not a malfunction of the IC recorder.
Wait until the animation disappears before
starting operation.
Getting Started
The IC recorder is accessing data when
an updating animation appears in
the display window or the operation
indicator flashes in orange or is lit in
red. While accessing, do not remove the
battery. Doing so may damage the data.
Step 2: Setting the
Clock

Control key
(/)
ENT
/MENU
You need to set the clock to use the
alarm function or record the date and
time.
Clock setting display appears when you
insert battery for the first time, or when
you insert a battery after the IC recorder
has been without battery for a certain
period of time. In this case, proceed from
step 3.
13
GB
1 Select “时钟设定” in the menu.
Press and hold
/MENU for more
than one second.
The menu mode will be displayed in
the display window.
Press the control key toward  or  to
select “详细菜单,” and then press ENT.
Press the control key toward  or  to
select “时钟设定,” and then press ENT.
2 Press the control key toward  or 
to select “07y1m1d,” and then press
ENT.
3 Press the control key toward  or
 to set the year, month, day, hour,
and minute in sequence, and then
press ENT.
4 Press  (stop) to return to the
normal display.
 Tip
Press /MENU to return to the previous
operation.
 Note
If you do not press ENT within one minute
of entering the clock setting data, the clock
setting mode is cancelled and the window will
return to the normal display.
To display the current date and
time
Press  (stop) to display the current date
and time.
14
GB
Basic Operations
Recording Messages
Built-in microphones
Basic Operations
 (headphone) jack
Operation indicator
1
1 Select a folder.
Press
/MENU to display the folder
selection window.
Press the control key toward  or  to
select the folder in which you want to
record messages, and then press ENT.
2
3
1
2 Start recording.
Press  (record/pause) in the stop
mode.
The operation indicator lights in red.
You do not need to press and hold
 (record/pause) while recording.
The new message will be
automatically recorded after the last
recorded message.
Speak into the built-in microphone.
15
GB
3 Press  (stop) to stop recording.
The IC recorder stops at the beginning
of the current recording.
 Tips
 While recording you can lock all the
functions of all the buttons so that you can
prevent inadvertent operations by sliding
the HOLD switch in the direction of the
arrow.
 Messages recorded using this IC recorder will
be recorded as MP3 files.
 When you purchase the IC recorder, there
are 5 folders already available, and you can
record up to 99 messages in each folder.
 Notes




While the operation indicator is flashing or
is lit in red or orange, do not remove the
battery. Doing so may damage the data.
Noise may be recorded if an object, such
as your finger, etc., accidentally rubs or
scratches the IC recorder during recording.
Before making a recording, be sure to check
the remaining battery indicator (page 12).
The maximum recording time varies if you
record messages in mixed recording mode.
To
pause
recording*
Do this
Press  (record/pause).
During recording pause,
the operation indicator
flashes in red and “ “
flashes in the display
window.
release pause
and resume
recording
Press  (record/pause)
again.
Recording resumes
from that point. (To stop
recording after pausing
recording, press  (stop).)
review the
current
recording
instantly
Press .
Recording stops and
playback starts from the
beginning of the message
just recorded.
review during
recording
Press and hold 
during recording
or recording pause.
Recording stops and you
can search backwards
while listening to fast
playback sound. After you
release , playback
starts from that point.
* One hour after you pause recording,
recording pause is automatically released
and the IC recorder enters the stop mode.
16
GB
Connect the supplied headphones to
the  (headphone) jack and monitor the
recording. You can adjust the monitoring
volume by pressing the control key
toward VOL + or VOL –, but the recording
level is fixed.
ST模式 :
High-quality stereo
recording mode
(44.1 kHz/192 kbps)
You can record with stereo
high-quality sound.
STSP模式 : Standard play stereo
recording mode
(44.1 kHz/128 kbps)
You can record with stereo
sound.
STLP模式 : Long play stereo recording
mode (22.05 kHz/48 kbps)
You can record for a longer
time with stereo sound.
SP模式 :
Standard play monaural
recording mode
(44.1 kHz/32 kbps)
You can record with
standard quality sound.
LP模式 :
Long play monaural
recording mode
(11.025 kHz/8 kbps)
You can record for a longer
time with monaural sound.
Basic Operations
Monitoring the recording
Select the recording mode in the “录音
模式” menu.
Selecting the recording mode
Maximum recording time
The maximum recording time of all the
folders is as follows.
ICD-UX60
ST mode
6 hr.
STSP mode
9 hr.
SP mode
36 hr. 5 min.
LP mode
144 hr. 30 min.
STLP mode
24 hr. 5 min.
ICD-UX70
ST mode
12 hr. 5 min.
STSP mode
18 hr. 5 min.
STLP mode
48 hr. 20 min.
SP mode
LP mode
72 hr. 30 min. 290 hr. 10 min.
(hr. : hours/min. : minutes)
To record with better sound quality,
select the ST or STSP mode.
17
GB
ICD-UX80
ST mode
STSP mode STLP mode
24 hr. 10 min. 36 hr. 20 min. 96 hr. 50 min.
SP mode
LP mode
145 hr. 20 min. 581 hr. 20 min.
(hr. : hours/min. : minutes)
18
GB
Starting to Record
Automatically in
Response to Sound
– the VOR Function
The recording starts when the IC
recorder detects sound. The recording
pauses when no sound is detected
and “
” and “
” flash. When the
IC recorder detects sound again, the
recording starts again.
Various Recording Modes
To cancel the VOR function
Various Recording Modes
Set “VOR” to “关” in the menu.
 Notes

2
1

The VOR function is affected by the sound
around you. Set “话筒灵敏度” in the menu
according to the recording conditions. If
recording is not satisfactory after you have
changed the microphone sensitivity, or for
an important recording, set “VOR” to “关” in
the menu.
If you press  (record/pause) to pause
recording when “VOR” is set to “开” in the
menu, only “
” flashes.
1 Press the control key toward  or
 to set “VOR” to “开” in the menu,
and then press ENT.
2 Press  (record/pause).
“
” and “
” appear in the
display window.
19
GB
Recording with an
External Microphone
2 Press the control key toward  or
 to select “麦克风,” and then press
ENT.
3 Speak into the external microphone
Stereo
microphone
1 Connect an external microphone to
the  (microphone) jack when the
IC recorder is in the stop mode.
“选择输入模式” appears in the display
window.
20
GB
and start recording.
The built-in microphone is
automatically cut off.
If the input level is not strong enough,
adjust the microphone sensitivity on
the IC recorder.
When a plug in power type
microphone is connected, power
is automatically supplied to the
microphone from the IC recorder.
 Recommended microphones
You can use the Sony ECM-CS10 or ECM-CZ10
electret condenser microphone (not supplied).
2 Press the control key toward  or 
to select “音频输入” and then press
ENT.
Recording from Other
Equipment
3 Start recording.
Various Recording Modes
The built-in microphone is
automatically cut off and the sound
from the connected equipment is
recorded.
Tape
recorder,
etc.
 Notes


When recording from other equipment, the
microphone sensitivity cannot be adjusted.
If the input level is not strong enough,
connect the headphone jack (stereo
minijack) of other equipment to the 
(microphone) jack of the IC recorder and
adjust the volume level on the equipment
connected to the IC recorder.
1 Connect other equipment to the IC
recorder when the IC recorder is in
the stop mode.
Connect the audio output connector
(stereo mini-plug) of other equipment
to the  (microphone) jack of the IC
recorder using an audio connecting
cable*.
“选择输入模式” appears in the display
window.
21
GB
* Optional audio connecting cables (not
supplied)
RK-G139 HG
RK-G136 HG
 Note
To the IC
recorder
Stereo
mini-plug
(without
resistor)
Stereo
mini-plug
(without
resistor)
To the other
equipment
Mini-plug
(monaural)
(without
resistor)
Stereo
mini-plug
(without
resistor)
Your dealer may not handle some of the above
listed optional accessories. Please ask the
dealer for detailed information.
Recording sound from a
telephone or a cell phone
You can use the ECM-TL1 headphonetype electret condenser microphone
(not supplied) to record sound from a
telephone or a cell phone.
For details on how to make the
connection, see the operating
instructions supplied with the ECM-TL1
microphone.
 Notes




22
GB
After you have made the connection, check
the sound quality of the conversation
and the recording level before you start
recording.
If the beep of the telephone or a dial tone is
recorded, the conversation may be recorded
with lower level of sound. In this case, start
recording after the conversation has started.
The VOR function may not work, depending
on the kind of telephone used or the line
condition.
We assume no responsibility whatsoever
for any inconvenience, even if you cannot
record a conversation using the IC recorder.
Playback/Erasing
Playing Back
Messages
 (headphone) jack
Operation indicator
1
5
Playback/Erasing
4
3
1
A-B
DPC
2
1 Select a folder.
Press /MENU.
Press the control key toward  or  to
select the folder, and then press ENT.
2 Press  or  to select the
message you want to play.
3 Press  to start playback.
The operation indicator lights in green.
(When “LED” is set to “关” in the menu
(page 38), the operation indicator does
not light.)
4 Press the control key toward VOL +
or VOL – to adjust the volume.
23
GB
5 Press  (stop) to stop playback.
After playing back the last message
in the selected folder, the IC recorder
stops at the beginning of that
message.
 Tip
During playback you can lock all the functions
of all the buttons so that you can prevent
inadvertent operations by sliding the HOLD
switch in the direction of the arrow.
Listening with better sound
quality


24
GB
To listen with the headphones :
Connect the supplied headphones
to the  (headphone) jack. The
built-in speaker will be automatically
disconnected.
To listen from an external speaker:
Connect an active or passive speaker
(not supplied) to the  (headphone)
jack.
Quickly locating the point you
wish to start playback (Easy
Search)
When “简单搜索” is set to “开” (page 37)
in the menu, you can quickly locate the
point at which you wish to start playback
by pressing  or  repeatedly
during playback.
You can go back approx. 3 seconds by
pressing  once, or advance approx.
10 seconds by pressing  once. This
function is useful for locating a desired
point in a long recording.
Searching forward/backward
during playback (Cue/Review)
To search forward (Cue): Press and
hold  during playback and release
it at the point you wish to resume
playback.
 To search backward (Review): Press
and hold  during playback and
release it at the point you wish to
resume playback.
The IC recorder searches at slow speed
with playback sound. This is useful to
check one word forward or back. Then,
if you press and hold the button, the IC
recorder starts to search at higher speed.

 When messages are played back
to the end of the last message



Press  (stop) or .
To resume playback from
that point, press 
again.
go back to the
beginning of
the current
message
Press  once.*
go back to
previous
messages
Press  repeatedly.
(During stop mode, keep
the button pressed to
go back the messages
continuously.)
Playback/Erasing

When you play back or fast play back to the
end of the last message, “MESSAGE END”
lights up for 5 seconds and the operation
indicator lights up in green. (You cannot
hear the playback sound.)
When “MESSAGE END” and the operation
indicator go off, the IC recorder will stop at
the beginning of the last message.
If you press and hold  while “MESSAGE
END” is lit, the messages are played back
rapidly, and normal playback will start at the
point you release the button.
If the last message is long and you wish to
start playback at a later part of the message,
press and hold  to go to the end of
the message and then press  while
“MESSAGE END” is lit to go back to the
desired point.
For messages other than the last one, go to
the beginning of the next message and play
backward to the desired point.
Do this
stop at the
current position
(Playback Pause
function)

To
skip to the next Press  once.*
message
skip to the
succeeding
messages
Press  repeatedly.
(During stop mode,
keep the button pressed
to skip the messages
continuously.)
* These operations are for when “简单搜索” is
set to “关” (page 37).
25
GB
Various playback modes
You can select “1个文件” playback (one
message/file is played back once), “文
件夹” playback (all the messages/files
in the selected folder are played back
continuously), “全部文件” playback (all
the recorded messages/files are played
back continuously) in the “播放模式”
menu (page 38).
Playing back a message
repeatedly
During playback, press and hold 
until “ 1” appears. The selected message
will be played back repeatedly.
To resume normal playback, press 
again.
Playback with “EFFECT”
Set “音效” to the setting you want in the
menu (page 37). However, when you
play back using the built-in speaker, the
setting is invalid.
26
GB
Adjusting the playback
speed – DPC (the Digital
Pitch Control function)
When you slide the DPC switch to “ON,”
you can adjust the playback speed
between +100% and –50% of normal
speed in the menu.
The message is played back in natural
tones thanks to the digital processing
function.
1 Slide the DPC switch to “ON.”
2 Adjust the playback speed in the
“DPC” menu (page 36).
To resume normal playback
Slide the DPC switch to “OFF.”
1 During playback, press
(repeat)
A-B to specify the starting point A.
“A-B B?” is displayed.
2 Press
“ A-B” is displayed and the specified
section is played back repeatedly.
To resume normal playback
Press .
To stop A-B Repeat playback
Press  (stop).
To change the segment specified
for A-B Repeat playback
You can sound an alarm and start
playback of a selected message at a
desired time.
You can have the message played back
on a specified date, once every week, or
at the same time every day.
Playback/Erasing
(repeat) A-B again to
specify the finishing point B.
Playing Back a
Message at a Desired
Time with an Alarm
Playing back a specified
section repeatedly – A-B
Repeat
1 Select the message you want to
play back with an alarm.
2 Enter the alarm setting mode.
Select “报警设置” in the menu and
press ENT.
Press the control key toward  or  to
select “开,” and then press ENT.
During A-B Repeat playback, press A-B
again to specify a new starting point A.
Then specify a new finishing point B, as
in step 2.
 Note
You cannot specify the finishing point B before
the starting point A that has been set.
27
GB
3 Set the alarm date and time.
Press the control key toward  or  to
select “日期,” a day of the week, or “每
天,” and then press ENT.
When you select “日期”:
Set the year, month, day, hour, and
minute in sequence, as described in
“Step 2: Setting the Clock” on page 13,
then press ENT.
When you select a day of the week
or “每天”:
Press the control key toward  or  to
set the hour and then press ENT, press
the control key toward  or  to set
the minute and then press ENT.
The setting process is finished and “”
(alarm indicator) appears in the display
window.
When the set date and time
comes
At the set time, the alarm will sound
for about 10 seconds while “ALARM” is
displayed in the display window and the
selected message will be played back.
When the playback ends, the IC recorder
will stop automatically at the beginning
of that message.
28
GB
To listen to the same message
again
Press , and the same message will
be played back from the beginning.
To stop the alarm before the
playback starts
Press  (stop) while the alarm sound is
heard. You can stop the alarm playback
even when the HOLD function is
activated.
To change the alarm setting
Start from step 2 on page 27.
To cancel the alarm setting
Follow steps 1 and 2- on page 27. In
step 2-, press the control key toward
 or  to select “关,” and press ENT. The
alarm will be cancelled and the alarm
indicator will disappear from the display
window.
 Notes





Erasing Messages
3, 4
2
Playback/Erasing

You can set only one alarm.
When the clock has not been set or no
messages are recorded, you cannot set the
alarm.
The alarm sounds even if you set “提示音” to
“关” in the menu (page 38).
If the alarm time comes during recording,
the alarm will sound after the recording is
finished. “” will flash when the alarm time
comes.
When the alarm time comes when the IC
recorder is in the menu mode, the alarm
will sound and the menu mode will be
cancelled.
The alarm set for “日期” will be cancelled
when the alarm playback finishes.
If you delete a message on which you
have set an alarm, that alarm will be also
cancelled.

You can erase the recorded messages
one by one or all messages in a folder at
a time.
 Note
Once a recording has been erased, you cannot
retrieve it.
29
GB
Erasing messages one by
one
Erasing all messages in a
folder
You can erase unwanted messages,
retaining all other messages when the IC
recorder is in the stop or playback mode.
When a message is erased, the
remaining messages will advance and
be renumbered so that there will be no
space between messages.
1 Select the folder containing the
1 Select the message you want to
erase.
2 Press and hold
/MENU for more
than one second to enter the menu
mode.
The menu mode window will be
displayed.
3 Press the control key toward  or 
to select “删除文件,” and then press
ENT.
The message to be erased will be
played back.
4 Press the control key toward  or 
to select “执行,” and then press ENT.
“正在删除…” appears in the display
window and the selected message will
be erased.
30
GB
messages you want to erase when
the IC recorder is in the stop mode.
2 Press and hold
/MENU for more
than one second to enter the menu
mode.
The menu mode window will be
displayed.
3 Press the control key toward  or
 to select “文件夹内全删除,” and
then press ENT.
4 Press the control key toward  or 
to select “执行,” and then press ENT.
“正在删除…” appears in the display
window and all messages in the
selected folder will be erased.
Editing Messages
 Note
When “ ” is displayed for the folder indicator,
you cannot move a message (page 46).
1 Select the message you want to
Moving Message to a
Different Folder
“正在执行…” is displayed and the
message is moved to the last position
in the destination folder.
When you move a message to another
folder, the original message in the
previous folder will be deleted.
To cancel moving the message
Press  (stop) before step 4.
move.
2 Press and hold
Editing Messages
/MENU for more
than one second to enter the menu
mode.
The menu mode window will be
displayed.
3 Press the control key toward  or 
to select “移动文件,” and then press
ENT.
The message to be moved will be
played back.
4 Press the control key toward  or 
to select the folder that you want to
move the message into, and then
press ENT.
31
GB
Utilizing the Menu Function
3 Press the control key toward  or 
Making Settings for
the Menu
4 Press  (stop) to exit the menu
to select the setting that you want
to set, and then press ENT.
mode.
 Note
4
2, 3
2, 3
1
1 Press and hold
/MENU for more
than one second to enter the menu
mode.
The menu mode window will be
displayed.
2 Press the control key toward  or 
to select the menu item for which
you want to make setting, and then
press ENT.
32
GB
If you do not press any button for one minute,
the menu mode is automatically cancelled and
the window will return to the normal display.
To return to the previous window
Press
/MENU during menu mode.
Menu settings
Settings
Operation mode
( : the setting can be made/
 : the setting cannot be made)
Stop
mode
Playback
mode
Recording
mode
ST模式, STSP模式, STLP模式,
SP模式, LP模式



话筒灵敏度
会议(H), 口述(L)



VOR
开, 关



显示
过去时间, 剩余时间, 录音日期,
录音时间



DPC
n% (n=–50 - +100)



音效
流行, 摇滚, 爵士, 重低音1,
重低音2, 关



简单搜索
开, 关



播放模式
1个文件, 文件夹, 全部文件



提示音
开, 关



LED
开, 关



背景灯
开, 关



移动文件
(Folder to be moved)



报警设置
开, 关



文件夹内全删除
执行, 取消



删除文件
执行, 取消



Utilizing the Menu Function
录音模式
Menu items
33
GB
Menu items
Settings
详细菜单
选择输入模式 麦克风, 音频输入
34
GB
Operation mode
( : the setting can be made/
 : the setting cannot be made)
Stop
mode
Playback
mode
Recording
mode






时钟设定
__y__m__d__:__



格式化
执行, 取消



Sets the recording mode.
ST模式:
Stereo high-quality recording mode.
STSP模式*:
Stereo standard recording mode.
STLP模式:
Stereo long play recording mode.
SP模式:
Monaural standard play recording mode.
LP模式:
Monaural long play recording mode.
话筒灵敏度
Sets the microphone sensitivity.
会议(H)*:
To record at meeting or in a quiet and/or spacious place.
口述(L):
To record dictation, or record in a noisy place.
VOR
Sets the VOR (Voice Operated Recording) function.
开:
Recording starts when the IC recorder detects sound and pauses
when no sound is heard, eliminating recording during soundless
periods.The VOR function is activated when  (record/pause) is
pressed.
关*:
The VOR function does not work.
Utilizing the Menu Function
Settings (*: Initial setting)
录音模式
Menu items
35
GB
36
Menu items
Settings (*: Initial setting)
显示
Changes the display mode.
过去时间*:
Elapsed playback time of one message
剩余时间:
During playback, the remaining time of the message
When stopped and during recording, the available recording time
录音日期:
Date recorded
录音时间:
Time recorded
DPC
Sets the DPC (Digital Pitch Control) function.
When you set the DPC switch to “ON,” you can adjust the speed of the
playback in a range from +100% to –50%. Set the speed by 10% for +
setting and by 5% for – setting.
–30%*
GB
Settings (*: Initial setting)
音效
流行:
Stresses middle ranges, ideal for vocals.
摇滚:
Emphasizes high and low ranges for a powerful sound.
爵士:
Emphasizes high ranges for a lively sound.
重低音1:
The bass sound is emphasized.
重低音2:
The bass sound is emphasized even more.
关*:
The 音效 function does not work.
Menu items
 Note
简单搜索
Utilizing the Menu Function
When playing back messages using a built-in speaker, the 音效 function
does not work.
Sets the easy search function.
开:
You can go forward for about 10 seconds by pressing  and go
back for about 3 seconds by pressing . This function is useful
when attempting to locate desired point in a long recording.
关*:
The easy search function does not work. When you press  or
, a message will be moved forward or backward.
37
GB
Menu items
Settings (*: Initial setting)
播放模式
Sets the playback mode.
1个文件:
When a message is played back, the IC recorder stops at the
beginning of the next message.
文件夹*:
Messages in one folder are played back continuously.
全部文件:
All messages are played back continuously.
提示音
Sets whether a beep will be heard or not.
开*:
A beep will sound to indicate that an operation has been accepted.
关:
No beep sound will be heard.
 Note
The alarm sounds even if you set “提示音” to “关” in the menu.
LED
Turns the operation indicator on or off during operation.
开*:
During recording or playback, the operation indicator lights or
flashes.
关:
The operation indicator does not light or flash, even during
operation.
 Note
When the IC recorder is connected to a computer, the operation indicator
lights or flashes even if “LED” is set to “关.”
38
GB
Turns the backlight in the display window on or off.
开*:
The backlight in the display window lights up for 10 seconds.
关:
The backlight in the display window does not light, even during
operation.
移动文件
The selected message will be moved to the selected folder (page 31).
Before attempting to move a message, select the message to be moved
and then go to the menu window.
报警设置
Sets the alarm (page 27).
开:
To set the alarm, select “开” and set the date, time or day of the week
or choose daily for playback.
关*:
The alarm is cancelled.
文件夹内全删除
All messages in the selected folder will be erased (page 30).
Press /MENU to return to the folder window before erasing the
messages and select a folder from which all messages are to be erased,
and then go to the menu window and select “执行.”
删除文件
The selected message will be erased (page 30).
Before erasing the message, select a message to be erased, and then go
to the menu window and select “执行.”
Utilizing the Menu Function
Settings (*: Initial setting)
背景灯
Menu items
39
GB
Menu items
Settings (*: Initial setting)
详细菜单
选择输入
模式
Selects the external input to be recorded that is connected to the
(microphone) jack.
麦克风*:
Select when you record messages using an external microphone.
音频输入:
Select when you record using other equipment.
时钟设定
Sets the clock by setting year, month, day, hour, and minute in
sequence (page 13).
格式化
Sets the formatting of the drive.
执行:
“正在格式化…” appears and the drive will be formatted.
取消*:
The drive will not be formatted.
 Notes


40
GB
Use the IC recorder formatting function to format the memory.
When the memory is formatted, all the data stored in the IC recorder will
be erased. Once the memory has been erased, you cannot retrieve the
data that was erased.
Utilizing Your Computer
System requirements
Operating systems:
 Note
64 bit OS is not supported.
 Note
The following systems are not supported:
 Operating systems other than the ones
indicated on the left
 Personally constructed computers or
operating systems
 Upgraded Operating systems
 Multi-boot environment
 Multi-monitor environment
When you are using Windows®
2000 Professional
Utilizing Your Computer
Windows Vista® Home Basic
Windows Vista® Home Premium
Windows Vista® Business
Windows Vista® Ultimate
Windows® XP Home Edition Service Pack
2 or higher
Windows® XP Professional Service Pack 2
or higher
Windows® XP Media Center Edition 2005
Service Pack 2 or higher
Windows® 2000 Professional Service Pack
4 or higher
Mac OS X (v10.2.8-v10.5)
Pre-Installed
– Port: USB port
– Sound board: Sound cards
compatible with any of the supported
operating systems
Using the IC Recorder
with Your Computer
Hardware environment:
Install the driver using “SonyRecorder_
Driver.exe“ in the IC recorder.
Connecting the IC recorder
to your computer
You can transfer the IC recorder data
onto your computer by connecting the
IC recorder to the computer.
Remove the USB cap from the IC recorder
and then connect the IC recorder to the
USB connector of your computer.
41
GB
The IC recorder is recognized by the
computer as soon as the connection is
made. While the IC recorder is connected
to the computer, “正在连接“ is displayed
in the display window of the IC recorder.
 Notes




Computer
IC recorder
To USB connector
 Tip
If the IC recorder cannot be connected to the
USB connector of your computer directly, use
the supplied USB connection support cable.

If you connect more than two USB devices
to your computer, normal operation will not
be guaranteed.
Use of this IC recorder with a USB hub or a
USB connection support cable other than
the supplied cable is not guaranteed.
A malfunction may occur depending on the
USB devices connected at the same time.
Before connecting the IC recorder to the
computer, make sure that the battery is
inserted in the IC recorder.
It is recommended that you disconnect the
IC recorder from the computer when you are
not using the IC recorder connected to the
computer.
Disconnecting the IC
recorder from the computer
Follow the procedure below; otherwise,
data may be damaged.
1 Make sure that the operation
indicator is not flashing.
2 Disconnect the IC recorder from the
USB connector of the computer.
42
GB
USB connection support cable (supplied)


Utilizing Your Computer
Dragon NaturallySpeaking is a speechrecognition software application that
allows you to recognize and transcribe
your recorded voice in a message and
convert it into a text file.
For details on Dragon NaturallySpeaking,
refer to the operating instructions
supplied with Dragon NaturallySpeaking.
For information on using Dragon
NaturallySpeaking, refer to the
documentation supplied with the
software. For the latest version and
information on the availability of Dragon
NaturallySpeaking in each region, please
refer to the following home page:
http://www.nuance.com
Introducing the voice
recognition software

You can use the transcribing feature
only when you have installed Dragon
NaturallySpeaking Select or Professional
Edition (not supplied) on your computer.
To install Dragon NaturallySpeaking, your
computer should meet the specified system
requirements.
You can transcribe the following messages
saved in your IC recorder or on your
computer;
 ST, STSP, STLP or SP recording mode
messages (MP3 files)
 44.1/16/11 kHz 16-bit WAV files saved on
your computer
You cannot transcribe a message recording
the voices of more than one person.
When voice recognition software (not
supplied) is installed on your computer,
you can transcribe a message into a text
file.
 Notes
Using Voice
Recognition Software
43
GB
Creating a user file adapted
to your recorded speech
(Training)
What is “Training”?
Before you can transcribe
recorded messages using Dragon
NaturallySpeaking, you must create a
user file specifically adapted to the sound
of your recorded speech. This procedure
is called “training.”
When training is complete, Dragon
NaturallySpeaking creates a user speech
file containing information about your
recorded speech.
 Refer to the operating instructions
or the help supplied with Dragon
NaturallySpeaking, as some parts of
training are the same as those required
for dictating directly to the computer
using a headset microphone.
 Even if you have already created a user
speech file with a headset microphone,
you should create a separate speech
file for the IC recorder to get better
recognition accuracy.
44
GB
Tips on using the IC recorder
When transcribing messages recorded
using the IC recorder, the following
tips will help you obtain maximum
recognition accuracy.
 Set “录音模式” to “ST模式,” “STSP模
式,” “STLP模式” or “SP模式” in the
menu.
When creating a user speech file
(training), set “录音模式” to the mode
you normally use for voice recognition
software.
 Set “话筒灵敏度” to “口述(L)” in the
menu.
 Hold the IC recorder firmly and
start recording.
Hold the IC recorder so that the
microphone is about an inch (2 - 3 cm)
from the corner of your mouth, not
directly in front of it. This minimizes the
sound of your breath in the recordings,
enabling maximum recognition
accuracy.
 Note
Avoid recording in a noisy place, such as on a
subway platform, in order to obtain maximum
recognition accuracy.
You can play back MP3 files on your
computer using the IC recorder.
The maximum playback time (tracks*),
when playing MP3 files using the IC
recorder, is as follows.
ICD-UX60
ICD-UX70
ICD-UX80
128 kbps
9 hr.
(135 tracks)
18 hr. 5 min.
(271 tracks)
36 hr. 20 min.
(545 tracks)
(hr. : hours/min. : minutes)
* In the case where tracks of 4 minutes each
are transferred to the IC recorder.
computer (page 41).
On the Windows screen; open “My
Computer” and make sure that
“IC RECORDER” has been newly
recognized.
On the Macintosh screen; make sure
that a “IC RECORDER” drive is displayed
on the desk top.
2 Copy the folder in which the MP3
files are stored to the IC recorder.
On the Windows screen using Explorer,
and on the Macintosh screen using
Finder, drag and drop the folder onto
the IC recorder.
The IC recorder can recognize up to
500 folders. You can copy up to 999
files to one folder and up to 5000 files
in total.
Utilizing Your Computer
48 kbps
24 hr.
(360 tracks)
48 hr. 20 min.
(725 tracks)
96 hr. 50 min.
(1452 tracks)
1 Connect the IC recorder to your
Playing Back
Transferred MP3 Files
Using the IC Recorder
3 Remove the IC recorder from your
computer, press /MENU, press the
control key toward  or  to select
the folder you want, and then press
ENT.
4 Press  or  to select the file
you want to play.
5 Press  to start playback.
45
GB
6 Press  (stop) to stop playback.
 To copy MP3 files (Drag and drop)
 Click and hold,
 drag,
 and then drop.
Construction of folders and
files
The folders and files are displayed on the
computer screen as shown on page 47.
The folder indicators in the display
window of the IC recorder are as follows:
:Folder in which you can record using
the IC recorder (They have been
already made when you purchase the
IC recorder.)
:Playback only folders (They are
displayed when MP3 files have
been transferred to them using a
computer.)
 Note
You can record messages in up to 5 folders
using the IC recorder.
46
GB
The name of a folder in which MP3 files are
stored will be displayed on the IC recorder as
it is, so it is convenient if you put an easy-toremember name on the folder in advance.
*2
The IC recorder can recognize up to three
levels of folders copied to the IC recorder,
that is, up to Folder 4 shown in the figure.
*3
If you copy MP3 files separately, they are
classified as being in “无文件夹.”
*1
“IC RECORDER“
VOICE
FOLDER01
Recordable folder
Playback only folder
Folder 1
*1
Utilizing Your Computer
 Tips
 You can enter title name or artist name, etc.,
into MP3 files as ID3 tag information. The ID3
tag information can be displayed on the IC
recorder. It is useful if you input the ID3 tag
information using the software you use to
make the MP3 files on your computer.
 You can display the ID3 tag information in
sequence by pressing the control key toward
 or .
FOLDER05
 Notes
Folder 2

Folder 3
Folder 4

*2
You cannot copy 511 or more folders (except
VOICE folders) or files to the root directory that
is located immediately below “IC RECORDER”
on the computer. This is due to Windows
system limitations.
If no title name or artist name has been
entered into the ID3 tag information,
“Unknown” will be displayed.
*3
47
GB
Using the IC Recorder
as a USB Mass Storage
Device
When the IC recorder is connected to
your computer directly or using a USB
connection support cable, image data
or text data on the computer, as well as
messages or files recorded using the IC
recorder can be temporarily stored in the
IC recorder.
Your computer must meet the
operating system requirements and port
environment described on page 41 to
use the IC recorder as a USB mass storage
device.
48
GB
Troubleshooting
Troubleshooting
Before taking the IC recorder for repair, check the following sections. Should any
problem persist after you have made these checks, consult your nearest Sony dealer.
Symptom
Remedy
The IC recorder cannot be
turned on.

The HOLD switch is set. Slide the HOLD switch in the direction
opposite that of the arrow.
The IC recorder does not
operate.

The battery has been inserted with incorrect polarity (page 11).
The battery is weak (page 12).
The buttons are locked with the HOLD switch (page 8).



Sound comes from the
speaker even when the
headphones are plugged
in.

If you plug in the headphones not securely during playback,
the sound may come from the speaker. Unplug the
headphones and then insert them securely.
The operation indicator
does not light.

“LED” is set to “关” (page 38). Display the menu and set “LED” to
“开”.
“存储容量已满” is
displayed and you cannot
start recording.

The memory is full. Erase some of the messages (page 29) or
erase all the messages after you store them on your computer.

The volume is turned down completely (page 23).
Headphones are plugged in (page 24).
Troubleshooting
No sound comes from the
speaker.
49
GB
Symptom
Remedy
“文件存储已满” is
displayed and you cannot
operate the IC recorder.

99 messages have been recorded in the selected
folder or
495 messages (when there are 5 folders) in total have been
recorded. Therefore you cannot record another message, or
move a message. Erase some of the messages (page 29) or
erase all the messages after you store them on your computer.
Recording is interrupted.

The VOR function (page 19) is activated. Set “VOR” to “关” in the
menu (page 35).
Noise is heard.

An object, such as your finger, etc., accidentally rubbed or
scratched the IC recorder during recording so that noise was
recorded.
The IC recorder was placed near an AC power source, a
fluorescent lamp or a mobile phone during recording or
playback.
Plug of the connected microphone was dirty when recording.
Clean the plug.
The  (headphones) plug is dirty. Clean the plug.



50
Recording level is low.

“话筒灵敏度” (microphone sensitivity) is set to “口述(L)”.
Display the menu and set “话筒灵敏度” to “会议(H)” (page 35).
When recording from
other equipment, the
input level is too strong or
not strong enough.

Connect the headphone jack of other equipment to the 
(microphone) jack of the IC recorder and adjust the volume
level on the equipment connected to the IC recorder.
Playback speed is too fast
or too slow.

The playback speed is adjusted in DPC. Slide the DPC switch to
“OFF” or display the menu and adjust the speed in DPC again
(pages 26, 36).
“--:--” is displayed.

You have not set the clock (page 13).
“--y--m--d” or ” --:--” is
displayed on the 录音日
期 display.

The date of recording will not be displayed if you recorded the
message when the clock was not set.
GB

The menu items displayed are different depending on the
operation modes (stop mode, playback mode, and recording
mode) (pages 33, 34).
The battery life is short.

The battery life on page 12 is based on playback with the
volume level set to 22 (using Sony alkaline battery LR03 (SG)).
The battery life may shorten depending on the operation of
the IC recorder.
There is no battery power
remaining after you have
left the battery inserted
for long time without
using the IC recorder.

Even if you do not use the IC recorder, the battery is consumed
slightly. The battery life in this case varies depending on
humidity or other environmental conditions. Usually, the
battery lasts about four months. If you do not intend to use the
IC recorder for an extended period of time, it is recommended
that you remove the battery.
The changed menu
setting does not function.

If the battery is removed just after the menu setting is
changed, the menu setting may not function.
It takes a long time for the
IC recorder to start.

If the IC recorder is required to process a large amount of
data, it may take longer for the IC recorder to start. This is not
a malfunction of the IC recorder. Wait until the start-up display
disappears.
The IC recorder does not
operate correctly.

Take out the battery and insert it again (page 11).
The IC recorder does not
operate.

You may have formatted the memory of the IC recorder using
the computer. Use the IC recorder formatting function to
format the memory (page 40).
Troubleshooting
Remedy
There are fewer menu
items displayed in the
menu mode.
Symptom
Please note that recorded messages may be erased during service or repair work.
51
GB
Error messages
Error message
Cause/Remedy
低电量

You cannot format the memory or erase all the files in a folder
because of insufficient battery power. Prepare a new battery to
replace the current one.
电量不足

Battery is exhausted. Replace the old battery with a new one.
存储容量已满

The remaining memory capacity of the IC recorder is
insufficient. Erase some messages before recording.
文件存储已满

When there are already 99 messages in the selected folder or
the total number of the file stored in the IC recorder becomes
maximum, you cannot record a new message. Erase some
messages before recording a message.
文件已损坏

You cannot play or edit messages, because the data of the
selected file is damaged.
请格式化本机

The IC recorder cannot be turned on using the computer
because there is no copy of the control file required for
operation. Format the IC recorder using the formatting
function in the menu.
系统无法继续处理

The IC recorder failed in memory access. Remove and then
re‑insert the battery.
Save a backup copy of your data and format the IC recorder
using the menu.

52
GB
Cause/Remedy
请设置日期时间

Set the clock; otherwise, you cannot set the alarm.
文件不存在

The selected folder does not have any messages. You cannot
move a message or set the alarm, etc., because of this.
过去的日期/时间

You set the alarm when the time has already passed. Check it
and set the appropriate date and time.
受保护文件

The selected message is protected and is now a “Reading
only” file. You cannot erase it. Cancel “Reading only” on your
computer to edit the message using the IC recorder.
未知格式

The data does not have a file format which the IC recorder
supports.
操作失败

You cannot move a message, because there is more than one
folder that has files with same name. Change the file names.
A message in the
folder cannot be moved.


If there are no MP3 files in the
folder, no folders are
displayed in the display window, therefore, the folder setting
will be changed.
系统故障

A system error other than the above has occurred. Remove the
battery and re-insert it.
Troubleshooting
文件夹切换
Error message
53
GB
System limitations
There are some system limitations of the IC recorder. Troubles as mentioned below are
not malfunctions of the IC recorder.
Symptom
Cause/Remedy
You cannot record
messages up to the
maximum recording time.


54
If you record messages in a mixture of ST, STSP, STLP, SP and LP
modes, the recordable time varies from the maximum ST mode
recording time to the maximum LP mode recording time.
The sum of the number on the counter (elapsed recording
time) and the remaining recording time may be less than the
IC recorder’s maximum recording time.
You cannot display MP3
files in order.

If you have transferred MP3 files using your computer, those
files may not be copied in order of transfer because of the
System limitation.
You cannot enter lowercase characters.

Depending on the combination of the characters used for
the folder name that was made on your computer, those
characters may change to all capitals.
You cannot specify the
finishing point B.

You cannot specify the finishing point B before the starting
point A that has been set.
GB
Additional Information
Tape
recorder, etc.
To the IC
recorder
To the other
equipment
RK-G139 HG
Stereo
mini-plug
(without
resistor)
Mini-plug
(monaural)
(without
resistor)
RK-G136 HG
Stereo
mini-plug
(without
resistor)
Stereo
mini-plug
(without
resistor)
To audio input
connector
To
 (headphone)
jack
Recording with Other
Equipment
* Optional audio connecting cables (not
supplied)
 Note
Your dealer may not handle some of the above
listed optional accessories. Please ask the
dealer for detailed information.
Additional Information
To record the sound of the IC recorder
with other equipment, connect the 
(headphone) jack of the IC recorder to
the audio input connector (minijack,
stereo) of other equipment using an
audio connecting cable*.
55
GB
Precautions
On noise

On power

Operate the unit only on 1.5 V DC. Use
one LR03 (size AAA) alkaline battery.

On safety

Do not operate the unit while driving,
cycling or operating any motorized
vehicle.
On handling


56
GB
Do not leave the unit in a location
near heat sources, or in a place subject
to direct sunlight, excessive dust or
mechanical shock.
Should any solid object or liquid fall
into the unit, remove the battery and
have the unit checked by qualified
personnel before operating it any
further.
Noise may be heard when the unit
is placed near an AC power source, a
fluorescent lamp or a mobile phone
during recording or playback.
Noise may be recorded when an
object, such as your finger, etc., rubs or
scratches the unit during recording.
On maintenance

To clean the exterior, use a soft cloth
slightly moistened in water. Do not use
alcohol, benzine or thinner.
If you have any questions or problems
concerning your unit, please consult your
nearest Sony dealer.
Backup recommendations
To avoid potential risk of data loss
caused by accidental operation or
malfunction of the IC recorder, we
recommend that you save a backup
copy of your recorded messages on a
tape recorder or to a computer, etc.
Specifications
Speaker
Capacity (User available capacity)
Power output
Recording time*
1
See page 17.
Frequency range





ST : 40 Hz - 20,000 Hz
STSP : 40 Hz - 15,000 Hz
STLP : 60 Hz - 7,500 Hz
SP : 60 Hz - 10,000 Hz
LP : 60 Hz - 3,400 Hz
Bit rates and sampling frequencies for
MP3 files
ICD-UX60: 512 MB
(approx. 496 MB=520,454,144 Byte)
ICD-UX70: 1 GB
(approx. 996 MB=1,044,611,072 Byte)
ICD-UX80: 2 GB
(approx. 1.94 GB=2,093,056,000 Byte)
A part of the memory capacity is used as a
management area.
Approx. 10 mm dia.
90 mW
Input/Output



Microphone jack (minijack, stereo)
 input for plug in power, minimum input
level 0.6 mV, 3 kilohms or lower impedance
microphone
Headphone jack (minijack, stereo)
 output for 8 - 300 ohms headphones
USB connector
 High-Speed USB compatible
Playback speed control
+100% to –50% (DPC)
Power requirements
One LR03 (size AAA) alkaline battery (supplied):
1.5 V DC
Operating temperature
5˚C - 35˚C
Dimensions (w/h/d) (not incl.
projecting parts and controls) (JEITA)*4
*1 When you are going to record continuously
for a long time, you may have to replace
the battery with a new one in the midst of
recording. For details on the battery life, refer
to page 12.
2
* The playback of MP3 files recorded using the
IC recorder is also supported.
*3 Not all encoders are supported.
Mass (incl. battery) (JEITA)*4
Additional Information
Bit rate: 32 - 320 kbps*2, VBR
Sampling frequencies*3: 16/22.05/24/32/44.1
/48 kHz
34.4 × 99.0 × 13.4 mm
48 g
*4Measured value by the standard of JEITA
(Japan Electronics and Information
Technology Industries Association)
57
GB
Supplied accessories
See page 5.
Optional accessories
Active speaker SRS-T88, SRS-T80
Electret condenser microphone ECM-CS10,
ECM-CZ10, ECM-TL1
Audio connecting cable RK-G136HG,
RK-G139HG (excluding Europe)
Your dealer may not handle some of the
above listed optional accessories. Please
ask the dealer for detailed information.
Design and specifications are subject to
change without notice.
58
GB
Index
A-B Repeat......................................................................27
Adjusting the volume......................................17, 23
Alarm..........................................................................27, 39
B
Battery...............................................................................11
Battery life.......................................................................12
Built-in microphones...........................................6, 15
Easy Search.....................................................................24
Editing Messages........................................................31
Erasing Messages.......................................................29
Error Messages.............................................................52
External Microphone................................................20
A
E
F
Folder.........................................................................23, 31
H
HOLD.....................................................................................8
C
I
Connecting the IC Recorder to your
Computer........................................................................41
Cue/Review....................................................................24
Index to Parts and Controls
Display window........................................................8
Front................................................................................6
Rear..................................................................................6
D
DPC (the Digital Pitch Control function)
....................................................................... 26, 33, 36, 57
L
LP............................................. 9, 12, 17, 33, 35, 54, 57
Index
59
GB
60
M
N
Maintenance.................................................................56
Menu
DPC........................................................................33, 36
LED........................................................................33, 38
VOR........................................................................33, 35
报警设置..................................................27, 33, 39
背景灯................................................................33, 39
播放模式..................................................26, 33, 38
格式化................................................................34, 40
话筒灵敏度.....................................................33, 35
简单搜索..................................................24, 33, 37
录音模式..................................................17, 33, 35
删除文件..................................................30, 33, 39
时钟设定..................................................14, 34, 40
提示音................................................................33, 38
文件夹内全删除.................................30, 33, 39
显示......................................................................33, 36
详细菜单..................................................14, 34, 40
选择输入模式............................... 20, 21, 34, 40
移动文件..................................................31, 33, 39
音效..............................................................26, 33, 37
Message number......................................................8, 9
Microphone sensitivity.......................................9, 35
Monitoring the recording.....................................17
Moving Message.................................................31, 39
Noise...................................................................................56
GB
P
Pause recording...................................................16, 19
Playback modes..........................................................26
Playing Back Message..............................................23
Playing Back MP3........................................................45
Precautions.....................................................................56
Preparing a Power Source.....................................11
R
Recording Messages................................................15
Recording mode.................................................17, 35
Recording time............................................................17
Recording with an External Microphone....20
Recording with Other Equipment...................55
Remaining battery indicator.............................8, 9
S
Setting the Clock........................................................13
SP............................................. 9, 12, 17, 33, 35, 54, 57
Specifications................................................................57
ST............................................. 9, 12, 17, 33, 35, 54, 57
STLP........................................ 9, 12, 17, 33, 35, 54, 57
STSP........................................ 9, 12, 17, 33, 35, 54, 57
System Limitations....................................................54
T
Troubleshooting..........................................................49
U
USB Mass Storage Device......................................48
V
VOR Function................................................19, 33, 35
Index
61
GB
Trademarks




Microsoft, Windows and Windows Vista are
registered trademarks or trademarks of the
Microsoft Corporation in the United States and/or
other countries.
Apple, Macintosh and Mac OS are trademarks
of Apple Inc., registered in the USA and other
countries.
Nuance, the Nuance logo, Dragon
NaturallySpeaking, and RealSpeak are trademarks
and/or registered trademarks of Nuance
Communications, Inc., and/or its affiliates in the
United States and/or other countries.
© 2007 Nuance Communications, Inc.
All rights reserved.
MPEG Layer-3 audio coding technology and
patents licensed from Fraunhofer IIS and Thomson.
All other trademarks and registered trademarks
are trademarks or registered trademarks of their
respective holders. Furthermore, “ ™ ” and “ ® ” are not
mentioned in each case in this manual.
62
GB
63
GB
Printed in China