Banbury™ Technical Specification

18” & 24” Towel Bars

Dimensions:

q

Stock Numbers:

Y2618BN – 18” Towel Bar

Brushed Nickel Finish q Y2624BN – 24” Towel Bar

Brushed Nickel Finish q Y2618CH – 18” Towel Bar

Chrome Finish q Y2624CH – 24” Towel Bar

Chrome Finish

Y2618 & Y2624

Materials:

Towel Bar is constructed of zinc.

Installation Instructions:

1.

Position the mounting template on the wall in the desired location.

Using a level, align the template and tape it to the wall.

2.

Remove each mounting post from the body by loosening the setscrew.

3.

Place each mounting post on the template.

4.

Drill 1/4" holes at the center of each oval marked location.

5.

Remove the template from the wall and insert the wall anchors

(provided) into each drilled hole.

6.

Place the mounting plate on the wall over the installed wall anchors.

Insert screws through the mounting plate into the anchors. Tighten the screws.

7.

Assemble the towel bar and posts.

8.

While assembled, position each end post with the setscrew down and place over mounting post. Tighten the setscrew at the bottom of each base.

Cleaning Instructions:

To preserve the fine finish of this product, clean only with a soft damp cloth. Dry well. Do not use commercial or abrasive cleaners.

Stock Number:______________________Towel Bar

By Creative Specialties

2 5 3 0 0 A L M O E N D R I V E

•

N O R T H O L M S T E D , O H 4 4 0 7 0

C O R P O R A T E H E A D Q U A R T E R S : ( 8 0 0 ) 3 2 1 - 8 8 0 9

•

F A X : ( 8 0 0 ) 8 4 8 - 6 6 3 6

I N T E R N A T I O N A L : ( 4 4 0 ) 9 6 2 - 2 0 0 0

•

F A X : ( 4 4 0 ) 9 6 2 - 2 7 2 6

C U S T O M E R S E R V I C E ( U S A ) : 8 0 0 - 8 8 2 - 0 1 1 6

•

F A X : ( 8 8 8 ) 3 7 9 - 2 7 2 0

W W W . S H O W H O U S E . M O E N . C O M



Copyright Creative Specialties International Literature # BA1442