Sinus LCD Series
Sinus LCD Series
On-Line “Double Conversion” Technology
1 phase in-1 phase out
1kVA to 3kVA (Tower & Rack Convertible)
On-line ‘double conversion’ technology
Real Digital Signal Processor (DSP) Controller
Power factor correction PFC (>0,99)
User friendly LCD display
Programmable Receptacles
Wide input voltage range and frequency
Availability to configure as 50/60Hz Frequency Converter
from LCD Panel
Smart communication port and SNMP management capability
Hot Swappable Battery
Emergency shutdown control through EPO
Overload & short circuit protection
Cold start (DC power on)
Genius battery management (GBM)
RS232, USB and SNMP can be activated simultaneously
Compact size, light weight & low noise
Sinus LCD Series Technical Specifications
MODEL
Power(kVA)
INPUT
Voltage
Frequency
Power Factor
OUTPUT
Power Factor
Voltage
Voltage Regulation
Frequency
Frequency Regulation
Harmonic Distortion
Crest Factor
Output Waveform
SS LCD 210
1
SS LCD 220
2
160VAC - 288VAC
50/60 Hz ± 5% (Auto Sensing)
>99%
0,8
220VAC / 230 / 240VAC
±%1
50/60 Hz
± 0,1%
<3%
3:1
Sinusoidal
100%-120% for 30 seconds
120%-150% for 10seconds
Overload Capacity
Whole efficiency
Transfer Time
Outlets
BATTERY
Type
Recharge Time
Voltage
Internal Battery
Back Up Time
SS LCD 230
3
>85%
3 pcs IEC C13 or 1pc Schuko
Cold Start
DISPLAY
LED Display
LCD Display
ALARMS
4pcs IEC C13 or 2pcs Schuko
Maintenance-free lead acid batteries
3 hours (to 90% of full capacity)
72VDC
6pcs 12V 7Ah
36VDC
3pcs 12V 7Ah
Full Load
Half Load
>88%
0ms
3 pcs IEC C13 or 2pcs Schuko
5 min
12 min
6pcs 12V 9Ah
4 min
10 min
YES
Utility or Bypass, Battery Low, Battery Abnormal, Overload, Site Wiring Fault, Service Mode, UPS Off, UPS Abnormal
Input /Output Voltage and Frequency Values, Load%, Battery Voltage, Internal Temperature
Line Failure, Battery Low, Over Load, Failure Events
PROTECTIONS
Short circuit, over temperature, overload, high voltage, battery low, EPO
COMMUNICATION
Interface
ENVIRONMENT
Temparature
Humidity
Noise Level(1m distance)
Protection Class
PHYSICAL
Net Weight (kg)
Dimensions (mm) WxDxH (Rack)
RS232 and USB
0°C - 40°C
0% - 90% (without condensation)
<50dBA (at 1 meter)
IP 20
16
440x450x88
29,5
440x650x88
30
440x650x88
STANDARDS
EN 62040-1-1 (safety), EN 62040-2(EMC)
ACCESORIES
L
E
INT
RTIFICAT
I
ON
NA
CE
RNAT
IO
Internal&External SNMP, Dry Contact Board, External Manual Bypass, Rail Kit, Software
S
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement