NUUO NVR/DVR/Hybrid NDVR Intelligent Surveillance Solution User Manual
Below you will find brief information for Intelligent Surveillance Solution NVR/DVR/Hybrid NDVR. The Intelligent Surveillance Solution NVR/DVR/Hybrid NDVR offers a comprehensive and user-friendly platform for managing and monitoring your security system. With its intuitive interface, you can easily access live views of all your cameras, record events, playback footage, and configure advanced settings. The system supports a wide range of IP cameras and DVRs, allowing you to customize your surveillance system to meet your specific needs.
Advertisement
Advertisement
The Intelligent Surveillance Solution
NVR/DVR/Hybrid NDVR
User Manual
Ver. 4.0.0.120904.00
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
TABLE OF CONTENTS
-
1 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
-
2 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
Miscellaneous ........................................................................................................................................................... 72
Status Display ............................................................................................................................................................ 72
Storage ....................................................................................................................................................................... 72
Startup ........................................................................................................................................................................ 72
Auto Reboot ............................................................................................................................................................. 72
Audio Preview ........................................................................................................................................................... 72
-
3 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
-
4 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
-
5 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
-
6 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
INSTALLATION
The Installation CD contains the software you need to run the complete system.
After inserting the CD, you should be able to see this window:
Click on Product Overview to access NUUO’s official website www.nuuo.com
for the latest product information. You may also visit our Online Tech Support Site for FAQ.
Click on Install if you wish to start system installation immediately, or Click on Documents for extra info.
If you are installing the system on multiple PCs, install the appropriate software for each PC:
- Server Application: All functions of NVR/DVR/Hybrid NDVR systems including Main Console, Playback,
Remote Live Viewer, Backup, and Verification Tool.
- Client Application: Remote functions of NVR/DVR/Hybrid NDVR systems including Playback, Remote Live
Viewer, Backup, and Verification Tool.
- Remote Desktop Tool: The tool to access main console and setup configuration remotely.
- DVR Driver: The tool to detect the type of capture cards and install the proper driver automatically.
- Smart Phone Client: Client application for smart phone devices.
- Related Link: Click for more information including User Manual, Installation guide and Hardware
Requirements.
The following section describes the installation of each element of the Intelligent Surveillance System.
-
7 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
Server Application Installation
Step 1: Insert the Installation CD. Run autorun.exe from the CD-ROM directly to start the installation.
Step 2: Select Server Application Installation.
Step 3: There are 4 system types listed in the System Setup Tool window. Choose one and select Next.
-
-
NUUO IP Surveillance System/Trial System
NUUO MPEG-4 Hybrid System
-
-
NUUO H.264 Hybrid System
NUUO Full D1H.264 Hybrid System
Note: The Setup Tool will detect the type of capture cards installed on PC and enable the system options automatically.
Step 4: Select Next to continue.
Step 5: Check the option I accept the terms of the license agreement, select Next to continue.
Step 6: Enter the appropriate information, select Next to continue.
-
8 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
Step 7: Choose Complete or Custom setup type.
COMPLETE SETUP TYPE
Installs all program features into the default directory.
Check Complete, and then select Next. All program features will be installed. [COMPLETE SETUP requires the most disk space.]
CUSTOM SETUP TYPE
Allows you to install the system to a preferred directory and select whichever program feature(s) to install. [Recommended for advanced users]
Check Custom, and then select Next.
Select Change if you wish to modify the installation directory.
Select the feature(s) for setup to install, select Next.
-
9 -
The Intelligent Surveillance Solution
Step 8: Select Install to start the installation.
NUUO NVR/DVR/Hybrid NDVR System
Step 9: Check Enable Ute Notification Function to allow us to notify you automatically when there are software utes (Recommended). This will help keep your system up to date. The uter will also collect info from your system that will be used for future system improvements.
Step 10: Select Finish, installation complete.
-
10 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
Client Application Installation
Step 1: Insert the Installation CD, run autorun.exe from the CD-ROM to start the installation.
Step 2: Select Client Application Installation.
Step 3: Select Next to continue.
Step 4: Check I accept the terms of the license agreement; select Next to continue.
Step 5: Enter your information and select Next to continue.
-
11 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
Step 6: Select Complete or Custom setup type and select Next to continue.
COMPLETE SETUP TYPE
Installs all program features into the default directory.
Check Complete, and then select Next. All program features will be installed. [COMPLETE
SETUP requires the most disk space.]
CUSTOM SETUP TYPE
Installs the system to a preferred directory and allows you to select whichever program feature(s) to install. [Recommended for advanced users]
Check Custom option and then click Next.
Select Change to modify the installation directory where setup will install, select Next.
Select the features setup will install, select Next after confirmation.
Step 7: Select Install to begin the installation.
Step 8: Select Finish when install is complete.
-
12 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
Remote Desktop Tool
Remote Desktop Tool allow user remote to access Main Console System and setup configuration.
Step 1: Insert the Installation CD.
Run autorun.exe from the CD-ROM directly to start the installation.
Step 2: Select Remote Desktop Tool.
Step 3: Select Next in the Install Shield Wizard dialog box.
Step 4: Check the option I accept the terms of the license agreement. Select Next.
Step 5: Enter your information, select Next.
Step 6: Select Complete or
-
13 -
Custom setup type.
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
COMPLETE SETUP TYPE
Install all program features into the default directory.
Check Complete, and then select Next. All program features will be installed. [Requires the most disk space.]
CUSTOM SETUP TYPE
Install the system to a preferred directory. Select program feature(s) to install. [Recommended for advanced users]
Check the option Custom, select Next.
Select Change to select folder setup will install files.
Select the features setup will install.
Step 7: Select Install to start the installation.
Step 8: Select Finish after installing the system completely.
-
14 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
DVR Driver Installation
Driver Install Tool help user to auto detect type of capture card and install corresponding drivers.
Step 1: Insert the Installation CD.
Run autorun.exe from the CD-ROM directly to start the installation.
Step 2: Select DVR Driver Installation.
Step 3: In the NUUO Driver Setup dialog box, select Next.
Step 4: Check I Agree to continue.
Step 5: Installing NUUO driver.
Step 6: Click Finish after installing choose to reboot now or
-
15 -
the system completely, and then later.
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
-
16 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
Smart Phone Client Installation
Step 1: Connect Smart Phone device to the PC.
Step 2: Insert the installation CD, click Smart Phone Client Installation to automatically install the client application in device.
Note: If you do not have Microsoft® ActiveSync installed, a message will appear “Cannot find
ActiveSync. Please reinstall ActiveSync and then run this installation again.”
Step 3: Check the client application is installed completely in smart phone device.
-
17 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
Failover Agent Installation
Step 1: Insert the Installation CD. Run Autorun Tool from the CD-ROM directly to start the installation.
Step 2: Select “Failover Agent Installation” then click on it.
Step 3: In the InstallShield Wizard dialog box, select language and click Next to continuous.
Step 4: There are 2 Installation Mode of options in “Initiation Mode” window, select one and click Next to start the installshield of Server package.
Step 5: In the InstallShield Wizard dialog box, click Next to continuous.
-
18 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
Step 6: Check the option “I accept the terms of the license agreement”. Click Next to continuous.
Step 7: Please enter your name and the company name for which you work. Click Next to continuous.
Step 8: Select “Complete Setup Type” or “Custom Setup Type” to install the System.
COMPLETE SETUP TYPE
Install all program features into the default directory.
- Check the option “Complete”, and then click “Next”. All program features will be installed.
[Require the most disk space.]
CUSTOM SETUP TYPE
Install the system to a preferred directory. Or select whichever program feature(s) to install. This is recommended for advanced users.
- Check the option “Custom”, and then click “Next”.
- Select appointed folder where setup will install files to. Click “Change” to modify the installation directory.
-
19 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
- Select the features setup will install. Click “Next” after confirmation.
Step 9: Click install to start the installation.
-
20 -
The Intelligent Surveillance Solution
Step 10: Click Finish after installing the system completely.
NUUO NVR/DVR/Hybrid NDVR System
Step 11: Execute the Failover Agent
Step 12: Enter the password you like into the edit box and enter again at the edit of Password Confirm. And then press “OK”. Now enjoy our Failover Agent service.
-
21 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
Quick Start
Execute Main Console
Step 1: Go to Start > All Programs > NUUO Surveillance System > NUUO Main Console to execute Main
Console.
Step 2: Enter your own password into the edit box, enter it again for double confirm and then click on OK.
Activate IP Camera License(s)
Step 1: Open License Manager Tool in Config menu.
Step 2: Select Activate tab, check the PC in Online network environment.
Step 3: Insert the SN, SN file or dongle to activate license.
Step 4: After software license is activated successfully, please restart Main Console.
Note: Please refer to Utilities>>License Management Tool for advanced settings.
Step2
Step 3
Install IP camera(s)
Step 1: Setup the IP camera(s) by referring to the user manual provided by the IP camera manufacturer.
Step 2: Make sure you can access this camera through IE browser.
Step 3: Add the IP camera(s) to the system by following the steps below.
-
22 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
Add IP camera(s)
Step 1: Execute Main Console.
Step 2: Type in user name and password and log in to the system.
Step 3: In Main Console, go to Config and select Setting to obtain the
Setting panel.
Step 4: Go to Camera tab.
Note: If the IP camera supports UPnP, follow step 5. Otherwise, follow step 8.
Step 5: Click on Search to detect IP cameras under this local area network (LAN).
Note: The Search function is available only when the IP cameras support UPnP.
Step 6: Select one of the IP cameras that are available and enter the username and password.
Step 7: Click OK to add the camera.
Step 8: Click Insert to insert the IP cameras.
Step 9: Enter the IP address or domain name (check the Use DNS option),
Http Port, Username, and Password.
Step 10: Select Auto Detect.
Step 11: Select OK to add the camera.
Step 12: Select OK to exit.
Step 5 Step 8
Step 9
Step 10
Step 11
Step 4
Step 3
Step 12
-
23 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
Set Schedule
Step 1: Execute Main Console.
Step 2: Type in user name and password.
Step 3: Select Schedule.
Step 4: The default schedule is “always record' when a camera is newly inserted.
Step 5: Choose a camera and then select Configure or just double click on the schedule bar to modify the recording mode.
Step 3
Step 6: Select OK to ute the recording schedule.
Step 7: Select OK to go back to Main Console.
Set Smart Guard
Step 1: Execute Main Console.
Step 2: Type in user name and password and log in the system.
Step 3: Click on Guard.
Step 4: Select a camera and then click on Insert Event.
Step 5: Take “General Motion” for example, select General Motion as the event type and then click on OK.
Step 6: In Alarm Event Configuration panel, define your own detection zone, sensitivity and interval. After that, click on OK to save the configuration.
Step 7: Click OK to go back to Main Console.
Step 4 Step 5
Step 4
Step 3
Step 5
-
24 -
Step 6
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
Start Recording & Smart Guard
Step 1: Execute Main Console.
Step 2: Type in user name and password and log in the system.
Step 3: Click on Start.
Step 4: Click on Start Recoding Schedule and Start Smart Guard System to enable the two functions.
Step 3
Playback
Step 1: Execute Main Console.
Step 2: Type in user name and password and log in the system.
Step 4
Step 3
Step 3: Click on Playback.
Step 4: In Playback, click on Date Time Search Dialog.
Step 5: Select a specific day from the calendar, left click on mouse and drag to select a video clip to replay; user can also select multiple channels to replay at the same time.
Step 6: The recorded files are now ready to view.
Step 5 Step 4
-
25 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
1. Main Console
This is the main operating system - to activate schedule recording, setup smart guard and configure system setting.
-
26 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
1.1 User Interface Overview
Exit
Minimize
Screen Division
Exit:
Shut down the Surveillance System or log out current user.
Crystal Ball
Information
Window
Minimize:
Minimize the Main Console window.
Screen Division:
Allocate the sub-screen display by clicking on the desired layout icon. To switch to single camera display, double click on a particular sub-screen. Double click on the screen again to regain previous screen division layout.
Divide into
1 screen(s)
Divide into
4 screen(s)
Divide into
6 screen(s)
Divide into
9 screen(s)
Divide into
10 screen(s)
)
Divide into
4 screen(s)
Divide into
13 screen(s)
3 screen(s)
Divide into
6 screen(s)
Divide into
16 screen(s)
Divide into
9 screen(s)
Divide into
N screen(s)
Divide into Divide into Switch to Rotate all
13 screen(s) 17 screen(s) Full screen screens
Only available under wide screen resolution(1440x900, 1680x1050, 1920x1080, 1920x1200):
Divide into
12 screen(s)
Crystal Ball
Indicate the working status of the system. Gray – at rest, Blue - recording, and Red – events detected.
When the crystal ball is red, click it to open the event report then cancel the event(s).
Information Window
Display date, time, free Disk space, IP Camera Bit rate customized text and Further information like
Temperature, Fan speed, System Resource and Network Utilization.
5 network service icons indicate which services are switched on/off.
LiveView Playback 3GPP Desktop CMS
Start
Stop
-
27 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
Note: To customize Information about window’s setting, go to Config - Setting - General - Status Display.
Select Advanced Setting for further information like Temperature, Fan speed, System Resource and
Network Utilization.
Start
Start:
Playback Schedule Guard
Click on the Start icon and select from the drop down menu to activate/ deactivate: (a) Recording
Config
Schedule System, (b) Smart Guard System, or (c) Counting Application. Or select Start/Stop Monitor All to activate/ deactivate all the functions at once.
The Start menu also include the option to Enable Secondary Display, and open monitor tools, such as open event report to monitor smart guard event; open E-map window to monitor all devices with map indicator; open Resource Report to check system status; open IO Control panel to monitor the DI/DO status and
display.
Note:
1. When activating any of the monitor functions of Smart Guard, system would consider the current screen status as normal. Therefore, if you want to, for example, detect Missing Object, be sure the object needed to be protected is in its position at the moment you click Start button.
2. To automatically activate the Recording Schedule System, Smart Guard System and Counting
Application, at the Main Console go to Config; Setting; General; Startup to setup the auto-startup functions.
3. As for Secondary Display, open event report, open E-map window, open Resource Report and open IO controls panel, Main Console will keep the behaviors as the latest status when exiting the system.
Playback:
Click on the icon to get Playback Console. You can watch recorded video, search recorded video, adjust image of the stored data, save video/ pictures, print images, check log information and event records, and
set up recording function configuration. See Playback on page 34 for detail.
Schedule:
Guard:
Add/edit type(s) of events that you want to detect; setup action(s) responding to events. See Guard on
Config:
Select from the drop down menu to modify the general settings, user account settings, save/ load configuration settings, open License Manager, edit counting application and metadata application, access
-
28 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
log viewer and backup files, or setup network services. See Config on page 71 for detail.
Note: User account and License manager could only be enabled for users with administrator privilege.
Set Preset Point / Go to Preset Point
Zoom Out / Zoom In
PTZ Camera
Control
Focus Far
1.2 PTZ Camera Control
/ Auto Focus
/ Focus Near
Control the movement of PTZ cameras. With cameras that support PTZ control, you can move, zoom, patrol, adjust the focus, and set preset points of the cameras.
1.2.1 Set Preset Point / Go to Preset Point
Adjust the camera view until you are satisfied. Click on the Set icon and set up the view as the preset point
01. Adjust the camera view again and set up the preset point 02. Repeat the process until finish setting up all preset points. You can enter any names you want instead of the preset point 01, preset point 02, preset point
03…, click on the Go icon and view the result of your setting.
Note: For the speed settings of PTZ camera, go to Config – Setting - PTZ Config to setup the advanced settings.
1.2.2 Zoom
Click on the + and – signs to zoom in and zoom out the view.
1.2.3 Focus
You can select to have the camera focused near or far. Click on Focus Near to focus on objects closer to the camera. Click on Focus Far to focus on objects further away from the camera. Click on Auto
Focus if you want the system to decide the focus point for you.
1.2.4 Patrol
Go to Set Preset Point - Set Patrol to obtain the Patrol Setup dialog. From the left window, select the cameras that you would like to have in the patrol group. Align the cameras in order in the right window and adjust the time. Rename the group name if required. After completing the setup, check the
Active option, and then click OK.
Note: You can define up to four groups of auto patrol. To start or stop, click on Go to Preset Point in the Main
Console, and select Start Patrol or Stop Patrol.
-
29 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
1.3 On Screen Menu
Right click on the camera screen and get the On Screen Menu, from which you can quickly adjust the setting of camera.
1.3.1 Camera Setting
Click to go to the camera setting page for configuration. See page 76
for details.
1.3.2 Enable Move/Area Zoom
With cameras that support PT function, click the Enable Move function to adjust the current camera’s view by clicking on the display screen. To cancel this function, right click on the screen and select Disable Move.
With cameras that support Area Zoom function, click the Enable
Move/Area Zoom function to adjust the current camera’s view by dragging a rectangle on the display screen. To cancel this function, right click on the screen and select Disable Move/Area Zoom.
1.3.3 Enable Talk
*This feature is not available under NUUO NVR Lite License.
With cameras that support two-way audio, select enable talk to utilize the function.
1.3.4 Enable Digital PTZ
To enable the PTZ functions of the camera, select the Enable digital PTZ option. Use mouse wheel or click on the + and – signs to zoom in and zoom out on the camera, or drag a rectangle to enlarge the area.
The square flashing on the video grid indicate the correspondent view ratio of the camera.
1.3.5 ImmerVision Lens Setting
*This feature is not available under NUUO NVR Lite License.
With cameras that support ImmerVision Lens. Right click on the display screen and select the mode of lens, original, PTZ mode, Quad mode and Perimeter mode. If the lens setting set as Quad, PTZ, or Perimeter mode, the Enable Digital PTZ option would become Enable ImmerVision digital PTZ.
1.3.6 Connect/ Disconnect
Right click on the display screen and select Connect/ Disconnect to modify the connecting status of the camera.
1.3.7 Show Camera
Select the camera from the Show Camera Menu to display video on selected screen.
Note:
1. The camera list of show camera menu shows as the one in the right column of monitor display panel.
2. The change of displayed screen is only applied to the current display divisions.
1.3.8 Duplicate Camera
Select the camera from the Duplicate Camera Menu to duplicate camera video to selected screen.
Note:
1. The duplicated camera would add to the camera list of duplicate camera menu shows as the one in the right column of monitor display panel.
2. The change of display list will apply to all divisions and also the right column of monitor display.
1.3.9 Delete Camera
Click on Delete Camera to remove a camera from the display screen of the display screen.
Note:
1. The camera list of delete camera menu shows as the one in the right column of monitor display panel.
2. The settings will apply to all divisions and also the right column of monitor display.
-
30 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
1.3.10 Fix Aspect Ratio
For some special camera resolution, user can enable Fix Aspect Ratio to view original ratio video, or disable this option to stretch 3:4 to fit window.
1.3.11 Instant Playback
*This feature is not available under NUUO NVR Lite License.
To open the Instant Playback window of the camera, select the Instant Playback option and choose the
period. Refer to 1.5 Instant Playback section for detail.
1.3.12 Snapshot
Select the snapshot function to capture a specific video image frame immediately. You have the options to copy the image to clipboard or to save it. For further settings, select OSD option and metadata option to export the image with date/time, camera number/name and metadata text. If the digital PTZ function is enabled in display view, you can also decide Full Size or Selected
Region as your snapshot region.
1.3.13 Manual Record
Start recording video by selecting manual record.
1.3.14 Toggle Full screen
Select to view a specific channel with full screen. Press “ESC” to go back to original window.
1.3.15 TV-Out Pop-up
* Note: This function is not available if there is no SCB-7108/7116 card installed.
Select to have the pop-up cameras on the screen notify users of the current event.
1.4 Live Display
NUUO Live display is flexible; you may change channels and screen divisions. Each screen division shares the same display list but has an independent display sequence.
For example, when using Show/Duplicate/Delete Camera functions to edit your camera list, the same list will be available to all different screen divisions.
Note: This camera list is also available at the monitor display tab from the Config/Setting window. Two monitors can have two independent lists.
-
31 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
Action
Show camera
(add cam 1)
Current division
1
Other division
1
add to first free channel
Duplicate camera
(duplicate cam 2)
1 2
2”
add to first free channel
Delete camera
(delete cam 2”)
1 2 1 2
remove cam 2” and keep channel free
When using a mouse to drag and drop camera channels, the sequence change will only apply to the current division.
Original Action Current division Other divisions
1 2 4 2
1 2 3
4
3 4
Drag cam 1 to cam 4
3 1
Note change of sequence
Right click on the camera screen for the on screen menu. Here you will be able to quickly adjust settings of your camera.
1.5 Instant Playback
* Not available under NUUO NVR Lite License
NUUO Instant Playback function allows you to play the last few minutes of any live video channel. Simply right click on Live Channel and select Instant Playback to access the recorded video.
1.5.1 Instant Playback window overview
Information Window: will show correct date and time of video.
Playback Period: indicates the available play period; three options are available: 1min, 3 min, or 5 min of video.
Export Period: indicates the period of video you desire to export. Default is set as available play period.
Tool: Adjust to original video resolution button: Press to adjust the video to original video resolution.
Audio button: Press to turn on / off the audio.
Metadata button: Press to enable / disable metadata transaction data overlay.
-
32 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
1.5.2 The navigation of Instant Playback
The Instant Playback window allows you to browse recorded video, take snapshot images and export video with audio and metadata transaction data.
To browse recorded video:
Simply click on the timeline to view the video, or use these navigation tools to control the player:
- Play / Pause / Stop
- Slow motion / Speed up control
- Reverse [frame by frame] / Fast Forward
- Play Previous / Next minute video
To take snapshots of a video clip:
Pause the video in image which you want to export and click the snapshot button displayed and can be saved or copied to clipboard.
To export recorded video:
Select export period, click the export button
. The snapshot is
, and setup the options of exported video.
The default export video period is as playback period. To customize period, select start/end time and click on Cue In/Out from the drop-down list of corner of the window.
button, the export period will be shown on the lower-left
Export Formats include:
ASF – Format with best efficiency. [Recommended]
AVI (Microsoft Video1) – Supports Windows Media Player with Vista & XP, the quality may be poorer than recorded video by transcode.
AVI (Original Format) – faster export process, better quality on the recorded video but the export file uses VLC Player to play. (For Windows Media Player, please install additional FFDShow codec).
Note:
The restrictions of AVI format. a. The maximum size of an AVI file is limited to 1.8 GB. b. Variation of frame rate will cause the resulting video to play slower or faster.
If the selected video sequence uses multiple image resolutions (CIF, 2CIF, 4CIF, etc.) or multiple video format(MPEG-4, M-JPEG, H.264), the exported video sequence will create separate export files every time the resolution changes.
-
33 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
2. Playback
Watch the recorded video, view and/or search for unusual events and recorded system information.
-
34 -
The Intelligent Surveillance Solution
2.1 User Interface overview:
Exit
NUUO NVR/DVR/Hybrid NDVR System
Search
Mode
Screen
Divisions
Open Record
Enhancement
/Post Processing
Tool
Save
Image
Speed: Control the speed of the playing video.
Options from 1x, 2x, 4x, 8x, 16x, 32x to 64x.
Zoom: Zoom in and zoom out.
-
35 -
General
Setting
Backup
Export Video
/ Audio
Minimize Information Window
Scroll Bar
Minimize: Minimize the Playback console.
Exit: Shut down the Playback console.
Audio Volume
Control
Log Viewer
Scroll bar: Indicates the status of the playing video; drag it to where you want to review.
Information Window: Display time and date, video status, cue in/ out time points and video playback speed.
Audio Volume Control: Adjust the audio volume.
Screen Division: Allocate the sub-screen display by clicking on the desired layout icon. To switch to single camera display, double click on a particular sub-screen. Double click on the screen again to go to previous screen division layout. To view in the full screen mode, right click on the screen for the Toggle Full Screen function.
Control:
Play , Pause and Stop the video.
FWD/REV: Customize the speed on Settings panel.
Step FWD/REV: Forward/reverse frame by frame.
Cue: When playing video, click on the Cue In/ Cue
Out icon at where you want to set as the starting/ ending point of a saved video clip.
The Cue In and Cue Out time will be displayed on the Playback Information Window once they are set.
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
On Screen Menu:
Toggle Fullscreen : Select to view cameras under full screen. Press “Esc” or right click to go back to original view.
Enable ImmerVision PTZ : Adjust PTZ in PTZ mode. (Depend on device)
ImmerVision Lens Setting : Select the mode of lens, original, PTZ mode, Quad mode and Perimeter mode. (Depend on device)
-
36 -
The Intelligent Surveillance Solution
2.2 Open Record / Date Time Search Dialog
Click on the Open Record / Date Time Search Dialog button withdraw the video record that you want to review.
2.2.1 Date Time Panel
NUUO NVR/DVR/Hybrid NDVR System
to access the Date-Time Panel and
2.2.2 Record Display Window
The record display window shows the information of the available video clips. It may show in calendar or list control view. For further details about
how to modify the record display window view, see page 47.
Remote Server Site: Open Remote Playback Site Management to access local machine or set up remote playback server. Select
Folder option to directly access recorded data folder or use Recent
List to access previously recorded folders.
Note: the Select Folder option requires password of Main Console.
Refresh: refresh display window Log Viewer: Accesses Log
Viewer Tool To access metadata Search Tool Previous Days: Show recording of previous date Next Days: To show recorded of next recording date
2.2.3 Date Time Period
Select the start and end time points that indicate the time period you would like to view.
2.2.4 Video Preview
Check the enable preview option to view the selected video.
2.2.5 Event Type
There are 6 event types; see Chapter 4 - Guard for details. You may set up different colors for different event types to help you select events.
* Note: Some event types will not be available under NUUO NVR Lite License.
-
37 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
2.2.6 Time Table
Utilize the icon to select all channels; also utilize the icon to deselect all channels. Finally, utilize the scale bar to modify the scale of the time table.
Video records are displayed as a thin line on the time table. Check Show Recording Schedule to show the defined period for scheduled recording. It is shown as a thick line in colors according to recording mode.
Show
Recording
Schedule
Selecting Show Event Log makes Time Table show the time of event detection like below:
Show Event Log
2.2.7 Withdraw the Record
Step 1: From the record display window, top left of the Date Time Panel, select the date you want to withdraw the record from. The red/purple/green/blue lines shown on the time table indicate available recorded video records.
Note: The record display window can be shown in (a) calendar view or (b) list control view. To modify the setting of the record display window, click on the Setting button at the right of the Playback
Console. See page 47 for more details.
Step 2: Use color bars to differentiate event types from each other. This will help you select video clips.
Step 3: Highlight the video clip you want to review by left-clicking and dragging the time period. You may also utilize the Start Time and End Time in Date Time Period Section. In addition, modify the scale of the time table with the + and – signs on the bottom left.
Step 4: Check the Enable Preview option to get the preview of the video you select.
-
38 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
Step 5: Click the camera name to increase or decrease cameras you want to playback.
Step 6: Click OK when setting is complete.
2.3 Search Mode
Click on the Search Mode icon to obtain the Intelligent Search Tool panel.
* This feature is not available under NUUO NVR Lite License.
Intelligent Search Tool Panel: Click on the Search Mode icon to open the Intelligent Search Tool. Set up unusual events here to detect abnormality that occurred during the recorded period.
5 events: General Motion, Foreign Object, Missing Object, Lose Focus, and Camera Occlusion.
2.3.1 Unusual Event-General Motion
General Motion: Detect all movements in the defined area.
Define Detection Zone: Left click and drag to draw a detection zone. You may define more than one zone on the screen by repeating the process.
Sensitivity: Modify the sensitivity setting with the slider. Sliding rightwards will increase the sensitivity level, meaning the slightest movement will trigger the alarm; in contrast, sliding leftwards will reduce the sensitivity for movement detection.
Note: Configuring an appropriate sensitivity level reduces the possibility of a false alarm. For instance, you can lower the sensitivity level to avoid the alarm being triggered by a swinging tree in the breeze.
Interval: Move the slider control to the right to increase time interval so that the alarm will only be triggered when the movement lasts longer. Move to the left to reduce the time interval.
Stop When Found: Check the option to have the video stop where motion was detected. Uncheck to have video continuously run to detect all events available. Results will show in a search result box.
Click on the listed event in the box to jump to the point in the video where motion was detected.
2.3.2 Unusual Event-Foreign Object
Foreign Object: Detect any additional object appearing in the defined area on the screen.
Define detection zone: Left click and drag to draw a detection zone. The search tool will detect additional objects that appear in this zone.
Define object size: Click and drag to draw and define the size of a foreign object.
Sensitivity: Modify the sensitivity setting with the slider. Sliding rightwards will increase the sensitivity level, while sliding leftwards decreases it.
Interval: Click and move the slider control to the right to increase time interval so that the alarm will only be triggered when the object has been removed from the area for longer. Move to the left to reduce the time interval.
Note: Setting up an appropriate Interval value will reduce the chance of false alarms. For example, you can lower the Interval to avoid the alarm being triggered by a pedestrian.
-
39 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
2.3.3 Unusual Event-Missing Object
Missing Object: Detection of selected objects removed from the defined area on the screen.
Define detection zone: Left click and drag to draw a detection zone. The search tool will detect selected objects removed in this zone.
Sensitivity: Modify the sensitivity setting with the slider. Sliding rightwards will increase the sensitivity level, while sliding leftwards decreases it.
Interval: Click and move the slider control to the right to increase time interval so that the alarm will only be triggered when the movement lasts longer. Move to the left to reduce the time interval.
2.3.4 Unusual Event- Focus Lost / Camera Occlusion
Focus Lost: Detection of cameras losing focus in recorded video.
Camera Occlusion: Detection of cameras being blocked in recorded video.
2.4 Enhancement / Post Processing Tool
Click on Enhancement / Post Processing Tool
2.4.1 General Setting
to configure settings.
Check the option and chose whether you want to apply the setting to all the channels or only to those currently shown on the screen.
2.4.2 Filter Setting
Visibility: adjust the gamma value of the image to enhance the image and make it cleaner.
Sharpen: activate the function. Move the slider control to the right to sharpen the image, to the left to soften it.
Brightness: activate the function. Move the slider control to the right to make the image brighter.
Contrast: activate the function. Move the slider control to the right to increase contrast.
Grey Scale: show the record in grey scale mode so the image displays in black and white.
2.5 Save Video
Step 1: Click on the display screen to choose the camera display that you want to save as a video clip.
Step 2: Set up the cue in and cue out points; the cue in and cue out time will show on the information window.
Cue In Cue Out
Step 3: Click on the Save Video button file name and click SAVE.
, choose the folder where you want to save the file at, enter the
-
40 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
Step 4: Set the Export Format (ASF recommend) and set the Use Profile.
ASF – more efficient than AVI format. [Recommended format]
AVI (Microsoft Video 1) – Supports Windows Media Player with
Vista & XP, quality may be poorer than recorded video by transcode process.
AVI (Original Format) - Faster export process with high quality video, but the export files can only be viewed using VLC Player to play.
(For Windows Media Player, please install additional FFDShow codec).
Note:
The restrictions of AVI format: a. The maximum size of an AVI file is limited to 4 GB. b. Variation of frame rate will cause the resulting video to play slower or faster.
If the selected video sequence uses multiple image resolutions (CIF, 2CIF, 4CIF, etc.) or multiple video format (MPEG-4, M-JPEG, H.264), the exported video sequence will create separate export files every time the resolution changes.
Step 5: Select to export (i.e. save) the recorded video with Audio, OSD and metadata, or export video only.
Step 6: Click OK to save the video.
2.6 Save Image
Step 1: Click on the display screen to choose the camera display from which you want to save pictures.
Step 2: Click on the Save Image button when the image you want is shown on the screen. You may click Pause to freeze the video, use Step Forward/ Step Backward function to find the picture(s) that you want to save.
Step 3: Select OSD option and metadata option to export the image with date/time, camera number/name and metadata text. If the digital PTZ function is enabled in display view, you can also decide either Full size or
Selected Region as your image region.
Step 4: You have the options to copy the image to clipboard or to save it. To save image just choose the folder and the format of image (BMP or JPEG) you prefer and then click save.
Note: You may skip step 3 by pre-setting a folder and format that you want to save the images (refer the section automatically save the image file at page
-
41 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
2.7 Print
Click on the Print button the video you choose.
Print Content:
to print the current image of
Print the image from the current selected channel or all the channels shown on the screen. Select to print original view or selected region on camera.
Page Setting:
Set to print the image with original size or fit to page. Set
Align image to Top, Center, or Bottom.
2.8 Backup
Compared to the Save Video function, Backup saves everything from the Playback panel, including video and log information.
You can start a full function Playback Console and load the backup files into it on any PC with Windows operating system. This means you may monitor the real time video and work on the backup files on separate computers simultaneously.
Step 1: Press the Open Record to select data and press Backup .
Step 2: You can adjust the Start Time and End Time you want to backup.
Step 3: You can adjust the Cameras you want to backup.
Step 4: You can calculate the size of the backup data.
Step 5: Select the directory you want to save the backup data including CDROM, DVD or Hard Disk.
Step 6: Check the log you want to backup.
Step 7: Press Backup to start.
Step 7: After backup is complete, click on playback.bat to play.
Step 3
Step 2
Step 4
Step 5
Step 6
Step 7
-
42 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
2.9 Log Viewer
Click on the Log Viewer button
2.9.1 System Log
to activate the Log Viewer dialog.
Step 1
Step 2
Step 3
Select Log Type from the drop-down menu. There are in total 36 types of log types, including:
Main Console Startup
Main Console Shutdown
User Login
User Login Failed
Start Schedule
Stop Schedule
Execute Recycle
Enable Channel
Disable Channel
Start Smart Guard
Stop Smart Guard
Modify Smart Guard
Modify Schedule
Modify Configuration
Start Live Streaming Server
Stop Live Streaming Server
Modify Live Streaming Server
Start Remote Playback Server
Stop Remote Playback Server
Modify Remote Playback Server
IP Camera Connection Lost
IP Camera Connection Regained
IP Camera Parameter Changed
Auto Restart Windows
Modify Metadata Setting
Metadata Connection Lost
Modify E-Map
Start Remote Desktop
Stop Remote Desktop
Modify Remote Desktop
Start Central Management
Stop Central Management
Modify Central Management
Start Counting Application
Stop Counting Application
IP Camera Connection Regained
Sync. Microsoft Active Directory User
IP Camera Parameter Changed
*Note: Some event types will not be available under NUUO NVR Lite License.
Step1: Choose the type of event you want to check or select “All” from the drop-down menu for all types of events.
Step 2: View the events that happened on a particular date or during a given time period by selecting search period.
For a particular date: check the Date box and indicate the date.
For a period: check the DateTime and then enter specific date and time.
Step 3: Click Search.
-
43 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
2.9.2 Export and Backup Log
View the Export and Backup Log history that had been operated by local or remote user.
Step1: Choose the type of event you want to check or select All from the drop-down menu for all types of events.
Step 2: View the events that happened on a particular date or during a given time period by selecting search period.
For a particular data: check the Date box right and indicate the date.
For a period: check the DateTime and then enter the date and time.
Step 3: Click Search
2.9.3 Unusual Event
View the unusual event history that had been detected by the Smart Guard System.
Step1
Step2
Step 3
Step 4
Step1: Choose the type of events you wish to view or select “All” from the drop-down menu to view all types of events. The types of Unusual Event include General Motion, Foreign Object, Missing Object, Focus
Lost, Camera Occlusion, Signal Lost, Disk Space Exhausted, System Health Unusual, Digital Input
Triggered and General Motion (device).
* Note: Some event types will not be available under NUUO NVR Lite License.
Step 2: Choose the camera channel you wish to view or select All for all channels available.
Step 3: View the events that happened on a particular date or during a given time period by selecting search period.
For a particular date: check the Date box right and indicate the date.
For a period: check the DateTime and enter the specific date and time.
Step 4: Click Search.
Note: When working with a video record,
1. Log Viewer will search for Unusual Event in the video record in Date & Time mode, starting from the beginning to the end of the record, which is the default setting of the system.
2. A link ( ) will appear next to each event time where video is available. By clicking on the link, the video will jump to the point where the unusual event takes place.
-
44 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
2.9.4 Counting Application
Display the history of Counting Application during a given time period.
* This feature is not available under NUUO NVR Lite License.
Step 4
Step1: Select the channel you want to check or select All from the drop-down menu for all channels.
Step 2: Select search period. View the events that happened on a particular date or during a given time period by selecting search period.
For a particular date: check the Date box right and indicate the date.
For a period: check the DateTime and then enter the date and time.
Step 3: Click Search.
Step 4: Press the button Export to.
Step 5: Type the file name and choose the file format (.xls or .txt).
2.9.5 Counting Application (Diagram)
Display the Counting Application data in diagram format. * not available under NUUO NVR Lite License
Step 4
Step1: Select the channel you want to check or select All from the drop-down menu for all channels.
Step 2: From the drop-down menu, set up how you would like the diagram to be displayed. You have the options of one day, one month, or one year.
Step 3: Select a specific date to make it the start point of the diagram.
Step 4: Click Search.
-
45 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
Step 5: Press the button Export to.
Step 6: Type the file name and the file will save as BMP files.
2.9.6 Metadata Log
View Metadata Log history detected by the Smart Guard System.
* not available under NUUO NVR Lite License
Step 5
Step1: Choose the type of events you wish to view or select All from the drop-down menu to view all types of events. The types of Unusual Event include Transaction Start, Transaction End, Open Cash Register,
Connection Lost, and Special User Defined Event. Please refer to the User manual of Metadata
Plugins for detail.
Step 2: Choose the camera channel you wish to view or select All for all the channels available.
Step 3: View the events that happened on a particular date or during a given time period by selecting search period.
For a particular date: check the Date box and indicate the date.
For a period: check the DateTime and then enter a specific date and time.
Step 4: Click Search. A link ( ) will appear next to each event time where video is available.
By clicking on the link, the video will jump to the point where the unusual event takes place.
Step 5: Press the button Export to.
Step 6: Type the file name and choose the file format (.xls or .txt).
2.9.7 Export
You may export the file to .xls or .txt file
Step 1
Step1: Select Export to.
Step2: Type the file name and choose the file format, .xls or .txt.
-
46 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
.xls
2.10 Setting
Click on the General Setting button for system configurations.
Record Display setting:
and go to Setting
Calendar View: Choose to display records under calendar view.
List Control: Choose to display records under checklist.
.txt
Play setting:
Play when open: Check the option and set the system to start playing the video clip every time a record is withdrawn.
Auto skip when record motion only mode: Check the option to set up the system to automatically skip to the points where there were motions recorded.
Next interval: Set the interval with which the video goes forward when you click on the “Next” icon on the control panel.
Previous interval: Set the interval with which the video goes backward when you click on the “Previous” icon on the control panel.
Capture Image setting: Sets how you want to save the image.
Save in clipboard: The image will be saved in the clipboard; image will be available to paste elsewhere.
Manually save the image file: You can manually select where you want to save the image. Name the saved file, and choose the file format you want to save as.
Automatically save the image file: By pre-setting a path/URL and the image format, the system will automatically save the image accordingly when you click the Save button in the control panel.
-
47 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
Miscellaneous
Synchronize video frames: Select this option to avoid display problems that may occur under high CPU loading.
Server Setting
Remote Playback Site Management. Please refer to page 44 for details.
OSD Setting
Enable Camera OSD to display video information on recorded video. Information includes camera name, camera number, date and time. User can also set up
OSD font; include the font, size, font color and any font effects desired.
Metadata Overlay Setting
* not available under NUUO NVR
Lite License
Enable metadata overlay to adjust
Font, Size, Color, Bold, Edge in
“Foreground” section, color and transparency in “Background” section, and then adjust display settings in “Display on Video Preview”.
-
48 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
2.11 Remote Server
2.11.1 Add Remote Playback Site
Press the Remote Server Icon or go to setting – server to config remote playback site management to add and setup remote playback sites.
Step 1: Enter the IP address or DNS, Port,
Username, and Password.
Step 2: Click Add to add the server.
Step 3: Click OK to exit the “Settings” panel.
2.11.2 Access Remote Playback Site
Go to Date Time Panel and click on the
Playback Site
icon on the top of the display window to access the Remote
-
49 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
3. Schedule
Click on the Schedule icon on the Main Console and set up the time duration for video recording on the schedule configuration panel.
-
50 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
3.1 Day / week Mode
Load
Camera /
Channel
Day /Week Mode
Schedule Details
Day Mode: Schedule the cameras to turn the recorder on and off at the same time every day according to your setting.
Week Mode: Allows you to schedule each camera for a different day of the week, additionally, you may assign extra holidays in the “Week” mode
Schedule Details: An outline of start time, end time, Record mode, frame rate, quality and resolution.
Please note these values refer to configured settings. Actual performance may vary according to camera and hardware settings.
To setup the time schedule for each camera, you may
1. “Load” the preset modes or
2. “Insert” a new schedule manually or
3. “Copy to” other cameras after manual setup.
3.1.1 Load Preset Modes
The system provides six modes to quickly setup recording schedule. Simply click on the Load for the drop-down menu.
Refer to the below tables for the definitions of each mode in each series.
IP+ series (IP camera)
Mode Format Time Record FPS Quality Resolution
Regular
Office
Shop
M-JPEG
MPEG-4
M-JPEG
MPEG-4
M-JPEG
MPEG-4
0:00-24:00
8:00-20:00
10:00-22:00
Always
Always
Always
Max
Max
Max
Max
Max
Max
Max
Max
Max
Max
Max
Max
Highly Secure
Disk Saving
Minor
M-JPEG
MPEG-4
M-JPEG
MPEG-4
M-JPEG
MPEG-4
0:00-24:00
0:00-24:00
0:00-24:00
Always
Motion
Motion
Max
Max
10 i-frame
5 i-frame
Max
Max
Max
Max
Max
Max
The Max indicates settings are same as camera settings in the config>setting>camera>camera parameter panel.
-
51 -
The Intelligent Surveillance Solution
SCB-1000, SCB-3000 series (Analog camera)
Mode Format Time Record FPS
Regular MPEG-4 0:00-24:00 Always 30
NUUO NVR/DVR/Hybrid NDVR System
Quality
Normal
Resolution
CIF
Office
Shop
MPEG-4 8:00-20:00
Highly Secure MPEG-4 0:00-24:00
Always
MPEG-4 10:00-22:00 Always
Always
Disk Saving MPEG-4 0:00-24:00
Minor MPEG-4 0:00-24:00
SCB-6000S series (Analog camera)
Mode Format Time
Regular H.264 0:00-24:00
Motion
Motion
Record
Always
30
30
30
30
15
FPS
7.5
Normal
Normal
Highest
Normal
Low
CIF
CIF
Max
CIF
CIF
Office
Shop
H.264
H.264
Highly Secure H.264
8:00-20:00 Always
10:00-22:00 Always
0:00-24:00 Always
7.5
7.5
7.5
Disk Saving H.264 0:00-24:00 Motion 30
Minor H.264 0:00-24:00 Motion 15
SCB-7000S series (Analog camera)
Mode
Regular
Format
H.264
Time Record FPS
0:00-24:00 Always 30
Office
Shop
H.264
H.264
8:00-20:00 Always
10:00-22:00 Always
30
30
Highly Secure
Disk Saving
H.264
H.264
0:00-24:00 Always
0:00-24:00 Motion
30
30
Minor H.264 0:00-24:00 Motion
SCB-8000HD series (HDcctv camera)
Mode Format Time Record
15
FPS
Regular H.264 0:00-24:00 Always 30
Quality
Normal
Normal
Normal
Highest
Normal
Low
Quality
Normal
Normal
Normal
Highest
Normal
Low
Quality
Normal
Resolution
D1
D1
D1
D1
CIF
CIF
Resolution
D1
D1
D1
D1
CIF
CIF
Resolution
1080P/720P
Office
Shop
Highly Secure
H.264
H.264
H.264
8:00-20:00 Always
10:00-22:00 Always
0:00-24:00 Always
30
30
30
Normal
Normal
Highest
1080P/720P
1080P/720P
1080P/720P
Disk Saving
Minor
H.264
H.264
0:00-24:00
0:00-24:00
Motion
Motion
30
15
Normal 960x540/640x360
Low 960x540/640x360
-
52 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
3.1.2 Insert a New Schedule Manually
Step 1: Left-click and draw the bar you want add to the time table. The scheduled time will show as a grey bar.
Step 1
Step 2 Step 3 Step 4
Step 2: Click the Insert icon and add a new schedule in the Regular Mode, i.e. to record video during the time period you set with 30 FPS, normal video quality, and normal resolution.
Step 3:
Change the setting by clicking on the Configure icon (See page 55 for detail) or double click the
Schedule Information.
Step 4: Click OK.
3.1.3 Copy Schedule
You may set up the schedule for each channel/camera by repeating the process above, or by simply applying the setting of a single camera to all the others by clicking the Copy To icon at the top of the display window.
3.1.4 Holiday and Custom setting
Allows you to schedule each camera for a different day of the week, additionally, you may assign extra holidays in the “Week” mode
Holiday Custom
-
53 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
Holiday: You may assign holidays where the system will work according to the setting for Sunday.
Note: The default Holiday setting will apply Sunday’s settings. For the Middle East region where Friday is a holiday, please adjust setting by right clicking on and select “Apply Holiday Schedule
From…”.
Custom: You can assign a particular date(s) on which the system will work according to a special schedule(s) different from the others.
3.2 Adjust the Scheduled Setting:
You can manually change the setting at any time after you insert or load a schedule.
Option 1: Move the cursor to the “Time Bar” and change the length or move the bar sideways to change the start and end points.
Option 2: Click on the Configure icon or double click on “Schedule Information” from the list to obtain the “Encoding Option” panel (next page) and select the desired setting.
Time Bar
Configure
Schedule
Information
-
54 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
3.3 Encoding Option
Original Video Encoded Video
Time Option
3.3.1 Pre-record/ Post-record Time
Record Mode
Video Encoder
The pre-record/ post-record function saves the recording data accordingly. For instance, to set up a 5 second pre-record time means the system will start saving the recording data 5 seconds before the event happens.
Note: The maximum of pre-record/post record period is 60 seconds.
3.3.2 Record Mode
There are four recording modes to choose from. Choose the one that suits your scenario best.
Always Record:
Select this option to record the video continuously.
Boosting Record on Event:
This option enables you to record at lower frame rate at regular times, and at higher frame rate under Smart Guard triggered events.
*This feature is not available under NUUO NVR Lite License
Select this option to obtain the “Select Event” panel.
Choose from the list any Smart Guard or digital input events or video analytics from the device. The chosen event(s) will trigger the recorded action. Click OK.
Configure desired frame rates of normal and boosting recording in the Video Encoder box.
Note: Please note it is required to enable ”Smart Guard” from the Main Console panel before configuring “boosting record on event” to trigger recording.
-
55 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
Record on Event:
Select this option to start recording at any predefined event, including Smart Guard events, metadata events, digital input events and video analytics from devices.
* Some options are not available under NUUO NVR Lite License
Select this option to obtain the “Select Event” panel. From the Smart Guard list, check the camera events or digital inputs to trigger the recorded action. Click OK.
Note: Please note it is required to enable ”Smart Guard” from the Main Console panel before configuring
“record on event” to trigger recording.
Record on Motion:
Select this option to start recording when motion is detected. Adjust sensitivity, the frame interval and zone to setup motion detection. To setup a single detection zone, left-click and drag the mouse to draw a rectangle. To setup more than one detection zone, simply repeat the same process or click “All” to select the entire screen.
Note: The maximum number of rectangle detection zones is 10.
3.3.3 Encoded Options
This option sets up the quality of the recorded video. The “Original Video” window is the original stream from the camera. The “Encoded Video” is preview of the recorded video corresponding with the encode settings below.
For IP cameras
The Encode Video function will reduce frames or re-encode original streaming from IP cameras. To save Hard
Disk usage, adjust frame rate with original video format or re-encode to smaller file size by adjusting frame rate, resolution and Quality/Bit rate.
Keep Original Video format:
Select this option to reduce frame rate only but not to re-encode video streams to save Hard Disk usage.
Adjust MJPEG video frame rate: Move slider to left to reduce frame rate.
Note: The maximum FPS will correspond to original video streams set up
on camera configuration.
Keep key-frame only: System will only record key frames of video streaming.
Note: The key frame interval is controlled by each camera manufacturer and cannot be adjusted.
Customized encoding: * not available under NUUO NVR Lite License
The video stream will be decoded then re-encoded by configuration.
Click “Setup” button to adjust “Encoder Parameter”.
Note: Customized encoding function causes high CPU usage, make sure the PC specification is enough (recommend Core 2
Quad or above)
For Analog cameras
The Encode Video function sets Frame Rate, Quality, and Resolution that you want to record and provides an approximate recorded time period.
For SCB-G3 Series cards you may additionally choose from different video formats, including Mpeg4 and H.264.
Note: Capture card devices “SCB series” are required.
-
56 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
4. Guard
Click on the Guard button on the Main Console to start the “Event and Action Configuration” panel. You will need to specify an event to be detected as well as set the appropriate action for the system when the event occurs.
Note:
1. Crystal Ball: Indicates the working status of the system. A blue crystal ball shows when the system is recording; it will turn red when an event is detected.
2. Event Report: When the crystal ball is red, you can click it to obtain the
Smart Guard Event Report and cancel the event(s).
-
57 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
4.1 Event
Insert Event
There are 4 sources of events: Camera (video image), metadata, Digital Input (device connected to your
PC) and System (condition of your hardware). You can assign multiple events by following the instructions below.
* Note: Some event types will not be available under NUUO NVR Lite License.
4.1.1 Camera Event - Assign a Camera Event
Step 1: Select a camera and click “Insert Event” icon. .
Step 2
Step 3
Step 2: There are six types of events: Signal Lost, General Motion, Foreign Object, Missing Object, Focus Lost, and Camera Occlusion. Select the event you want on the Event Type list, and then click OK.
* Note: Only General Motion and Signal Lost are supported under NUUO NVR Lite License.
Step 3: Configure the Event Type. See the following instructions.
4.1.2 Camera Event – Basic Setting
[Signal Lost, General Motion, Foreign Object, Missing Object,
Focus Lost, and Camera Occlusion]
Enable Event: Check the box to activate the event.
Life Cycle:
Automatic cancel event when event disappears: The alarm/action will be cancelled once the event is fixed or ended.
Manually cancel event or event last triggered: The alarm/action will remain until being cancelled from Main
Console. Choose this option to avoiding missing any alarms.
Note: To cancel the event:
Method 1: Start > Open Event Report > Cancel All Events
Method 2 : Click the red crystal ball to obtain the Smart Guard
-
58 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
Event Report. Click to cancel the event(s).
Cancel event after ___ seconds: Enable checkbox and set a timer for canceling the event after a specific time.
Activated Period:
Always activated: Allow alarm to be activated at all times.
As Day Mode Schedule: Customize a specific time range for the alarm to be activated.
The alarm will be available daily according to your settings.
Click on Day Schedule to configure the schedule.
Choose Add Time Period and drag on the coverage bar to define an activated schedule.
Choose Remove Time Period and drag on the coverage bar to subtract from existing schedules.
Click on Clear All to remove all settings.
As Week Mode Schedule: Customize a weekly based time range for the alarm to be activated.
Click on Week Schedule to configure the schedule.
Choose Add Time Period and drag on the coverage bar to define an activated schedule.
Choose Remove Time Period and drag on the coverage bar to subtract from existing schedules.
Click on Clear All to remove all settings.
4.1.3 Camera Event - Signal Lost
Detect the loss of video signal from camera.
-
59 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
4.1.4 Camera Event - General Motion
- Detect any movement in the defined detection zone.
For each video channel you may define up to 5 motion detection profiles (General Motion 1-5).
This will allow you to set different sensitivity levels for different regions in the same video.
Sensitivity
Interval
Region
Definition
Start Simulation
Event Name: Customize your event name here.
Alarm Event Option:
Sensitivity: Click and move the slider control to the right to increase sensitivity so that minimal movement will trigger the alarm. Move the bar to the left to reduce the sensitivity. Setting up an appropriate sensitivity value will minimize false alarms. For example, you can lower the sensitivity to avoid the alarm being triggered by a swinging tree in the breeze.
Interval: Click and move the slider control to the right to increase interval time so that the alarm will only be triggered when the movement lasts longer. Move to the left to reduce the interval
Region Definition:
Define detection zone: To detect General Motion, you have to define a detection zone. Left-click and drag the mouse to draw a detection zone. You may define more than one zone on the screen by repeating the same process. User can also click on “All” button to select the entire detection zone.
Start Simulation: Click the Start Simulation button and test the function on the preview screen.
4.1.5 Camera Event - General Motion (Device)
- Detect movement with motion detectors of devices (IP cameras or video servers).
* Note: This function is only available on devices with built-in motion detection.
Please refer to the user manual of your device to set up motion detection.
Start Simulation
Click to test if motion detection is set up correctly.
Go to Web Interface
Click to go directly to device web page for configurations.
-
60 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
4.1.6 Camera Event - Foreign Object
Alarm will be set off when an object appears in the defined area on the screen.
Sensitivity
Interval
Define object size
Region Definition
Start Simulation
Alarm Event Option:
Sensitivity: Click and move the slider control to the right to increase sensitivity so that minimal movement will trigger the alarm. Move the bar to the left to reduce the sensitivity of movement detected. Setting up an appropriate sensitivity value will minimize false alarms. For example, you can lower the sensitivity to avoid the alarm being triggered by a swinging tree in the breeze.
Interval: Click and move the slider control to the right to increase interval time so that the alarm will only be triggered when the movement lasts longer. Move to the left to reduce the interval.
Region Definition:
Define detection zone: To detect Foreign Object, you have to define a detection zone. Left-click and drag the mouse to draw a detection zone. You may define more than one zone on the screen by repeating the same process. User can also click on “All” button to select the entire detection zone.
Define Object size: After defining the detection zone, select Define Object Size and then left-click and drag the mouse to indicate the size of the object you want to detect.
Note: For instance, if you want to prevent somebody from leaving a briefcase in a hallway, place a briefcase in the hallway in view of the camera. On the screen, draw an area that fits the size of the briefcase and define it as the object size. Remove the briefcase and then activate the Smart Guard function on the Main Console. The system will consider everything on the screen normal when you click
Start to activate the monitor function.
Start Simulation: Click the Start Simulation button and test the function on the preview screen.
-
61 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
4.1.7 Camera Event - Missing Object
Alarm triggers when an object disappears in the defined area on the screen.
Sensitivity
Interval
Region Definition
Start Simulation
Alarm Event Option:
Sensitivity: Click and move the slider control to the right to increase sensitivity so that minimal movement will trigger the alarm. Move the bar to the left to reduce the sensitivity of movement. Setting up the appropriate sensitivity value will reduce the chance of false alarms. For example, you can lower the sensitivity to avoid the alarm being triggered by a swinging tree in the breeze.
Interval: Click and move the slider control to the right to increase interval time so that the alarm will only be triggered when the movement lasts longer. Move to the left to reduce the interval.
Region Definition:
Define detection zone: To detect Missing Object, you have to define a detection zone. Left-click and drag the mouse to draw a detection zone. You may define more than one zone on the screen by repeating the same process. User can also click on “All” button to select the entire detection zone.
Note: For instance, if you want to prevent somebody from removing the computer monitor on the desk, draw an area that fits the size of the monitor on the screen.
Start Simulation: Click the Start Simulation button and test the function on the preview screen.
-
62 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
4.1.8 Camera Event - Lose Focus
This function alarms you when any of the cameras is losing focus and has blur image.
Sensitivity
Interval
Ignore Lighting
Start Simulation
Alarm Event Option:
Sensitivity: Click and move the slider control to the right to increase sensitivity so that a relatively small movement will trigger the alarm. Move the bar to the left to reduce the sensitivity of movement detection. Set up an appropriate Sensitivity value will reduce the chance of false alarm. For example, you can lower the Sensitivity to avoid the alarm being triggered by a swinging tree in the breeze.
Interval: Click and move the slider control to the right to increase interval time so that the alarm will only be triggered when the movement lasts longer. Move to the left to reduce the interval time.
Ignore Lighting: Check the box to avoid alarm being set off by light changing.
Region Definition:
Define detection zone: To detect Lose Focus, you have to define a detection zone. Left-click and drag the mouse to draw a detection zone. You may define more than one zone on the screen by repeating the same process. User can also click on “All” button to select the entire detection zone.
Start Simulation: Click the Start Simulation button and test the function on the preview screen.
4.1.9 Camera Event - Camera Occlusion
This function alarms you when any of the cameras are blocked.
Sensitivity
Interval
Ignore Lighting
Start Simulation
-
63 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
Alarm Event Option:
Sensitivity: Click and move the slider control to the right to increase sensitivity so that a relatively small movement will trigger the alarm. Move the bar to the left to reduce the sensitivity of movement detection. Set up an appropriate Sensitivity value will reduce the chance of false alarm. For example, you can lower the Sensitivity to avoid the alarm being triggered by a swinging tree in the breeze.
Interval: Click and move the slider control to the right to increase interval time so that the alarm will only be triggered when the movement lasts longer. Move to the left to reduce the interval time.
Ignore Lighting: Check the box to avoid alarm being set off by light changing.
Start Simulation: Click the Start Simulation button and test the function on the preview screen.
4.1.10 Metadata Event - Assign a Metadata Event
Step 1: Select a metadata device from the list and click to insert event.
Note: Please insert the metadata device in Config - Metadata Application first. Then set the alarm based on it.
Step 2: There are five types of events: Transaction Start, Transaction End, Open Cash Register, Connection
Lost and User Defined. Select the event you want on the Event Type list, and then click OK.
Note that the Open Cash Register event is available on POS metadata devices only.
Transaction Start - Detect the beginning of any transaction.
Transaction End - Detect the end of any transaction.
Open Cash Drawer - Detect the opening of any cash drawer.
Connection Lost - Detect the connection problems between metadata devices and Main Console.
User Defined - Detect any condition defined by user.
Step 3: Configure the setting of the Event Type. For details please refer to the user manual of metadata plugins.
4.1.11 Digital Input Event - Digital Input Event
Step 1
Step 2
-
64 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
Step 1: Click and highlight Digital Input on the event type list, and then click the Insert Event icon.
Step 2: Select the device that is connected to your system.
4.1.12 System Event - Assign a System Event
Step 1
Step 2
Step 1: Click and highlight System on the event type list, and click the Insert Event icon.
Step 2: There are four events, select the event you want to detect.
4.1.13 System Event - Disk Space Exhausted
This function alarms you when disk space is exhausted.
4.1.14 System Event - System Health Unusual
This function alarms you when CPU is under high temperature or fan speeds are running low.
Current Status: Displays current CPU temperature, Motherboard Temperature, Fan Speed and Power fan speed.
Options: Check the Temperature Format for Celsius or Fahrenheit; fix maximum motherboard temperature for
High Temperature Alarm and minimum RPM for Power Fan Speed Alarm.
4.1.15 System Event – Resource Depleted
This function alarms you when CPU or memory is depleted.
Current Status: Shows you the current Total CPU Loading and Total Memory Usage.
Options: Fix maximum percentage for High CPU Loading Alarm and High Memory Usage Alarm.
4.1.16 System Event – Network Congestion
This function alarms you when network bandwidth is overloaded.
Current Status: Shows you the current Total Upload/Download bit rates.
Options: Fix maximum bit rate (Kbps) for High Upload/Download Bit rate Alarms.
System Health Unusual Resource Depleted Network Congestion
-
65 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
4.2 Action
4.2.1 Action - Assign a action type
Step 1
Step 2
To insert a new action:
Step 1: Choose an event and click the insert action icon .
Step 2: There are 10 types of actions, select the actions you want and then click OK.
1. On Screen Display
2. Play Sound
3. Send E-mail
4. Phone Call
5. PTZ Preset Go
6. DI/DO
7. Send a SMS Message
8. Send to Central Server
9. Send snapshot to FTP
10. Popup E-Map on event.
* Note: Some actions will not be available under NUUO NVR Lite License.
Step 3: Configure the setting of the Action Type if needed.
4.2.2 Action Type - On Screen display
A red warning will be flashing on the screen of Main
Console, indicating which type of unusual event is detected.
Step 1: Select the “On Screen display” action and then click OK.
Step 2: The responding window will popup to Selected Camera.
Click the “On Screen display” indicator to modify the setting.
Camera: Display the camera applied to this action.
Auto popup: Click the Auto popup column and select the expected monitor for popping up the event.
Displayed text: You can follow the default setting to show the event type, or enable “Customized Text” to define the text as your preference.
4.2.3 Action Type - Play Sound
Sound alarm – the system will play the sound as alarm when an unusual event is detected.
Step 1: Select the “Play Sound” action and then click OK.
Step 2: The responding window will popup to choose a Wave file (.wav). Click the “Play Sound” indicator to modify the setting.
-
66 -
The Intelligent Surveillance Solution
4.2.4 Action Type - Send E-mail
The system will send an E-mail immediately to given accounts indicating the type of event, the time, and
NUUO NVR/DVR/Hybrid NDVR System
attaching a picture taken while the event is detected.
Step 1: Select the “Send E-mail” action and then click OK.
Step 2: The responding window will popup to Select Contact, type the message to append. (You can choose more than one contact).
Edit Address Book: Insert the contact information here.
Note:
1. To give the system the E-mail accounts, go to
Config > Setup > Hotline. See Configurations on
2. For Digital Input Events, this warning action will send the snapshot of the associated camera. Please refer to I/O settings for details.
4.2.5 Action Type - Phone Call
The system will call a given phone number when an unusual event is detected.
* Note: This function is not available under NUUO NVR Lite License.
Step 1: Select the Phone Call action and then click OK.
Step 2: The responding window will popup to Select Contactor and key-in the message which want to append on SMS content. (You can choose one more contact at once).
Note: To setup the phone number and make an audio record for the phone call, go to Config - Setup
- Hotline. See Configuration on page 80l.
4.2.6 Action Type - PTZ Preset Go
The PTZ (pan/tilt/zoom) camera will go to a preset point or auto patrol when an unusual event is detected.
1.
* Note: This function is not available under NUUO NVR Lite license.
Step 1: Select the “PTZ Preset Go” action and then click OK.
2.
Step 2: The responding window will pop up to PTZ Camera Preset Go.
Click the “PTZ Preset Go” indicator to modify the setting.
Step 3: Set the action of cameras which you want to trigger by events.
For example: Please follow below steps to setup this function.
Set the action of camera 1:
1. Choose camera 1.
2. Set the start, end preset points.
3. Select the Life Cycle.
4. Click on Add.
3.
2.
Set the action of camera 2:
5. Choose camera 2.
6. Set the start patrol and end patrol.
7. Select the Life cycle
8. Click on Add.
9. Finally click on Ok to save all setting of cameras.
Note:
Configure your PTZ camera before using this function. See Config on page 78 for PTZ camera
configuration.
-
67 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
4.2.7 Action Type – DI/DO
To trigger Digital input/output devices connected to the system, such as alarm lights and sirens.
Step 1: Select the “DI/DO” action and then click OK.
Step 2: Select devices to be triggered by event.
Step 3: Click on the Life Cycle box of each device to configure the life cycle of each triggered alarm.
The alarm may terminate when the event disappears, 10/30/60 seconds after trigger, or require a manual cancel. Note that you may also customize a timer by simply inserting a number in the box.
Step 4: You can enable the Automatically Popup I/O Control Panel check box to obtain the correspondent panel to monitor the I/O status.
Note: You should adjust the setting of I/O device in Config>Setting>I/O Device first, the I/O control panel will display the device status based on it. You can also adjust the size of the panel by dragging a mouse or click the on the right top of the display window.
4.2.8 Action Type –Send an SMS message
The system will send an SMS message immediately to given accounts indicating the type and time of event.
* Note: This function is not available under NUUO NVR Lite
License.
Step 1: Select the “Send a SMS message” action and then click
OK.
Step 2: The responding windows will popup to Select Contactor
(You can choose one or more contacts). Click the
“Send an SMS message” indicator to modify the setting.
Note: To configure a GSM modem for the system, go to
Config - Setup - Hotline. See Configuration at page 80.
4.2.9 Action Type – Send to Central Server
This action will send an event and snapshot to NUUO’s
Central Management Server (separate software package, not included).
* Note: This function is not available under NUUO NVR Lite License.
Step 1: Select the “Send to Central Server” action and then click OK.
Note: Please refer to the CMS user manual for details on using the Central Management System.
-
68 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
4.2.10 Action Type – Send snapshot to FTP
The system will upload a snapshot immediately to FTP site.
* Note: This function is not available under NUUO NVR Lite License.
Step 1: Select the “Send snapshot to FTP” action and then click OK.
Step 2: Configure options.
Life Cycle: Configure the system to stop sending snapshots after ___ seconds, or when the event is terminated.
Frame Interval: Define the frequency of snapshots.
- Minimum is 1/60 fps (1 snapshot per 60 seconds)
- Maximum is 30fps (30 snapshots per second).
Resolution: Choose to keep snapshot in original resolution or compress to lower resolution.
Note:
1. For Digital Input Events, this warning action will send the snapshot of the associated camera.
Please refer to I/O settings for details.
2. To define an FTP server, go to Config > Setup > Hotline. See Configuration at page 80 for detail.
4.2.11 Action Type – Popup E-Map on Event
The system will auto popup E-Map window and show the assigned map and indicator.
* Note: This function is not available under NUUO NVR Lite License.
Step 1: Select the “Popup E-Map on Event” action and then click OK.
Step 2: The responding window will popup to Popup e-map on event.
Click the “Popup E-Map on Event” indicator to modify the setting.
Step 3: Select the Map Layer and Indicator, and then click OK.
Note: To edit E-Map, see Configuration at page 98.
4.2.12 Action Type – TV-Out
Pop-up video to TV-Out monitor on event.
* Note: This function is not available if there is no SCB-7108/7116 card installed.
4.3 Advanced Settings
Click on the Advanced button on the bottom of the Event and Action Configuration dialog for advanced settings.
Condition of startup – Smart Guard can be started under the follow modes:
1. Manually start/stop from Start menu or as Main Console startup setting (default)
-
69 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
2. Started by defined D/I trigger. Select D/I from dropdown list and click OK.
-
70 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
5. Configuration
Config
Click on the Config icon, select from the drop-down menu and open the Configuration panel.
Modify the setting and access License Manager, Video Analytics, Metadata application,
Metadata Search, Log viewer, Backup, or Network Services. Select Save/Load Configuration to save/load all the settings.
* Video Analytics and Metadata Application not available under NUUO NVR Lite License.
* Video Source function available only with MPEG-4 software compression captures devices.
-
71 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
5.1 System Setting – General
Startup
Storage Status Display
Miscellaneous
Audio Preview Auto Reboot
5.1.1 Startup
Check the Main Console box to execute Main Console system when windows startup.
Check the following 3 main functions and 5 network services to auto activate functions when Main Console system is executing, including Schedule Recording System, Smart Guard System, Counting Application, Live
Streaming Server, Remote Desktop Server, 3GPP Server, Remote Desktop Server and Central Management
Service. Checking other options can setup the startup status as Full screen, auto lock system by startup or allow system to auto login with the preset account.
Setup Auto login: Enable “Auto login” and click the Setup button to obtain the Auto Login Setup panel, insert the User Account and
Password to login automatically when the system starts. Enable the
Minimize after login to minimize the Main Console window after login.
5.1.2 Storage
Location: Assign the default folder (you can setup several directories for storage) for the system to store all data files. Recommend not to save in system HD (C :\) to avoid PC efficiency drop when free storage is low.
If you have more than one drive available for recording, you may check “Enable Disk Load Balance” to evenly distribute recording to multiple drives. This will increase efficiency of the system.
Automatic Recycle: The system will automatically delete out-dated data to save storage space.
Recycle when disk space is: Set the standard limit to let the system recycle automatically.
Less than _ %: The system will start to recycle if the disk space is less than the indicated percentage
(default is 10%).
Note:
1. The system will detect the storage space of default location firstly, if the default storage space is exhausted, the video will be stored to the next directory.
2. If all the status of locations exceeds the storage rule, the system will start recycling in an hour progress.
-
72 -
The Intelligent Surveillance Solution
Only keep video for: Delete the video records that are older than the number of days set.
Note: If the default storage spaces exhausted (disc space is less than 3%), the system will start to recycle by hourly
NUUO NVR/DVR/Hybrid NDVR System
period.
Log Recycling: Click the button to obtain the Advanced
Recycle Setting panel. Set the days that you want to keep the event or Keep all event logs within interval of video files.
Event Log: Delete the event log data that is older than the number of days set.
System Log: Delete the system log data that is older than the number of days set.
Counting: Delete the counting application data that is older than the number of days set.
Metadata Transaction: Delete the metadata transaction data that is older than the number of days set.
Resource Report: Delete the Resource report data that is older than the number of days set.
5.1.3 Status Display
Check the boxes of the information that you wish to see in the information display window in the Main
Console.
Status Display: Select the information such as Current Date, Current
Time, Login User, Free Disk Space, IP Camera Bit rate and User Defined
Text.
Advanced Setting: Click the button to obtain the Advanced Setting
Panel to select Temperature, Fan Speed, System Resource, Network
Utilization information and System Uptime info you wish to display.
5.1.4 Miscellaneous
Automatically Popup Event Report: Event report dialog to automatically popup when events are detected.
Make sure to stop Smart Guard System before you modify the setting, otherwise the modification will not take effect.
Minimize to system tray: Enable the Option to minimize the Main console to be an icon in notification area of windows task bar when pressing the minimize button.
Minimize
-
73 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
Note: Insert the username and password of MainConsole again when clicking the minimized
MainConsole icon in notification area of windows task bar to start monitoring.
Synchronize video frames: Select to avoid image tearing problems that may occur while CPU loading is increased.
DDNS Service: Dynamic Domain Name Server (DDNS) function allows you to use Live View or Web View to connect to the Main Console through Internet event if you have a dynamic IP address.
Click on the DDNS button to obtain the Dynamic DNS Setup panel.
Set up the DDNS function by selecting the provider type, filling with user name, password and hostname, and adjust the ute period.
5.1.5 Audio Preview
Default Channel: Select the audio channel that you wish to hear from in “Default Channel”.
Enable Audio on Active Channel: Select the “Enable Audio on Active Channel” option to hear the audio from the selected video channel (selected by mouse) on each video grid of Main Console. The default channel will play if no specific video channel is selected.
Volume: Adjust the volume with the “volume bar.”
System plays the audio of
“default channel”
5.1.6 Auto Reboot
System plays the audio of the upper-left “selected channel”
Check the option of “Enable Auto Reboot” so that you can reboot the system on the time you select.
Step 1: Check the option of “Enable Auto Reboot.”
Step 2: Select the time you want to reboot.
Note: Enable “Main Console”, “Auto Login”, “Setup login account” and check other status in Startup section so when PC reboots the system will run normally.
-
74 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
5.2 Setting - Camera
Search
Insert
Config
Config
Delete
5.2.1 Add Camera
Four function buttons will be included in the Setting/Camera panel if you have our Hybrid Surveillance
System license for IP camera.
Search: Click on the Search icon for the Search IP Camera panel. The system will start scanning automatically; click on the Stop Scan button to stop scanning any time.
Fill in the user name and password for each IP camera found and click OK to add it to the camera list.
Insert: Click on the Insert icon for the IP/Video Server Setting panel and add IP cameras to the list. See following part (IP Camera/Video Server Setting panel) for detail.
Delete: Click on the Delete button to remove the selected IP camera(s) from the system. Click OK to finalize the modification.
Config: Click on the Config button for the IP/Video Server Setting panel. You can modify the IP camera settings with the Setting panel. See following part (IP Camera / Video Server Setting panel) for detail.
-
75 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
5.2.2 IP Camera / Video Server Setting panel
Network
Device
Description
Network: Fill in required info of the Network field (including Name, IP Address, Http Port, User Name, Password and Protocol) referring to the instruction provided by the camera manufacturer. Check “Use DNS” to use domain name instead of IP address.
Device: Choose the IP camera manufacturer from the drop-down menu. Alternatively click on “Auto
Detect” and the detected vendor /model name will show in the box.
Description: Shows information for the IP camera.
5.2.3 Camera Parameter
Camera List
Camera List: The camera(s) connected to the system will show on the panel, click the name of the camera to adjust the setting.
Camera Parameter:
Camera Name: Name the camera.
Go to Web Interface: Go to vendor’s website interface to configure the camera setting (optional).
Camera Settings: Set the camera parameter offered by camera vendor.
Video Parameter: Adjusts the video’s brightness, contrast, saturation, and color hue values.
Lens Setting: ImmerVision Lens is currently supported. Click to enable lens or setup configurations, such as camera position.
Stream Profile: Stream profiles are pre-defined to preferred settings which will respond from the query of the remote live view function. Each profile has different Format, Frame, Resolution, Quality and Bit
-
76 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
rate (Kbps) settings.
Stream Profile
Options
Note:
The types of stream profiles and options will differ among stream sources.
IP cameras on NVR IP+ License:
5 profiles include Original (not configurable), High, Normal, Low and Minimum (for /Smart Phone
Clients).
IP cameras on NVR Lite License:
3 fixed, not configurable profiles including Original, Low and Minimum (for /Smart Phone Clients).
Analog cameras on SCB series1000-3000 :
4 profiles include High, Normal, Low and Minimum (for /Smart Phone Clients).
Analog cameras on SCB series 6000S/7000S/7100 :
4 profiles include H.264 (H.264 format only), High, Normal, Low and Minimum (for /Smart Phone Clients).
HDcctv cameras on SCB series 8000HD series:
4 profiles include H.264 (H.264 format only), High, Normal, Low and Minimum (for /Smart Phone Clients).
Note:
1. Use “Copy to…” option to apply settings of a single camera to others.
2. To choose stream profile of remote live view, see Live view setting at page 110 for detail.
5.2.4 OSD Setting
Select the information that you wish to see in the on-screen display, or the sub-screen of the camera. Click the Font button to setup the font style.
-
77 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
5.3 Setting - I/O Device
I/O Device Setting
List of devices
Device Setting
Input Monitor
Output Monitor
I/O Device Setting:
Module Setting: Name the module device and ID that has been connected to the digital input/output device(s) to your system.
Device: This column displays the device(s) already installed to the system.
ID: Select the number of the I/O port to which you plug the ribbon cable.
Input Monitor: The device(s) is turned on if the dot is red. By triggering the digital input device, the related icon will light up. This is used to check that the device is correctly connected.
Output Monitor: The device(s) is turned on if the dot is red. By clicking on the icon, you may trigger the digital device connected to the system. This can be used to test if the output device is correctly connected.
Device Setting
Name: Insert the name of the device (input and output).
Type: Select the device type from the drop-down menu.
1. N/O: Normal Open.
2. N/C: Normal Close.
Associated Camera: You may assign one camera to each digital input device. Smart Guard will collect snapshots from these cameras upon certain triggered events. For details please refer to 4.2 -
Action. DI’s included with IP cameras will keep its own camera as default associated camera.
5.4 Setting - PTZ Config
Basic Setting
Advanced Setting
Miscellaneous
-
78 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
Install PTZ cameras and follow the instructions of the camera manufacturer. A PTZ camera is usually connected to the PC with RS-485/RS-422.
Check the box on the camera list to activate the PTZ control function of a PTZ camera.
Basic Setting: Select the camera model, com port, baud rate, and address according to your PTZ camera.
Note: If the camera model is an IP PTZ camera, you can work PTZ function directly without the com port, baud rate, and address settings.
Advanced Setting: You may setup the pan speed, tilt speed, zoom speed and auto pan speed. Adjust the settings by dragging the bars.
Miscellaneous:
Patrol Group:
You can setup the Patrol Group, please see page 29 for detail.
Default PTZ Preset: By enabling this function, the PTZ camera will automatically go back to a default preset point when no PTZ commands are under action. To enable this option, check “Back to PTZ preset after idle” and define idle periods and a default preset point.
User-Defined Preset: User-Defined Preset for the analog speed dome can trigger the extra-function of the speed dome itself, for example auto-tracking, login menu of camera…etc. You can refer to the detailed description of each analog speed dome on its user manual.
Step1: Type the Preset Name.
Step 2: Type the Preset Number.
Step 3: Select the Preset Type.
Step 4: Press the buttons to Add, Delete, or Ute preset setup.
-
79 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
5.5 Setting – Hotline
Configure the settings of various contacts or devices, including E-mail, FTP, GSM modem and Telephone calls which will be triggered upon event detection.
E-mail: Input the following information: Server, Port, and Sender’s E-mail address, E-mail’s subject title, Body content and SSL option for encrypted transmission. Click on the Send Test Mail button to test the settings.
Note: * indicates mandatory fields
FTP: Input the following information: server, Port, Login ID, Password, and Upload directory, according to your
FTP type to enable/disable Passive mode. You may click on the Upload Test File button to test the settings.
Note: * indicates mandatory fields
Telephone: Select the modem that the system is going to dial the info call with, and then insert the phone number you want to dial to. (A modem is required for voice transition.)
Note: 1. You must use a modem with voice capability.
2. You may select a Wave format file; it will be played in the phone to alarm the person who picks up the phone call.
GSM modem: Set the Port and Baud Rate of the GSM modem device, and then enter PIN code. You can setup the interval of send SMS message. You may click on Test to send a test SMS message.
Note: The interval is set to fix a minimum time period between two SMS messages. If set as 60 min, the
SMS between 60 min would be deleted and not sent to user.
-
80 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
5.6 Setting - Address Book
Manage the address book from which you may send out a phone call or an E-mail when an unusual event is detected.
5.7 Setting – Monitor Display Playback Option Cameras List
Auto Scan
Layout
Playback Option: Execute Playback on the secondary monitor by checking the box. Make sure to adjust the display setting of your computer in advance to avoid system error.
Cameras List: The left side displays a list of all cameras; modify the cameras shown on primary/ secondary monitor in the right window.
Auto Scan: Activate auto scan to rotate the channels/ cameras on the display screen.
For instance, you may select to show only 4 sub-screens on the main console while having 16 channels connected to the system. With auto scan function, you will be able to see all 16 channels by turns. You can set up a primary channel that will always be on the screen and a secondary channel that has secondary priority.
Layout: Choose the number of divisions for NxN division on the Main Console screen.
-
81 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
5.8 Setting – Joystick
* Note: This function is not available under NUUO NVR Lite license.
Function Parameter
Import Export Default
Function: You can choose the function from the drop-down menu for the button of the joystick.
Note: Following is a complete list of all functions:
1. N/A
2. Goto Preset Point (including Home)
9. Start/Stop Auto Scan
10. PTZ Speed Up
3. Goto Camera
4. Goto Previous Camera
5. Goto Next Camera
6. Switch Screen Layout
7. Toggle Single Camera View
8. Toggle Full Screen
11. PTZ Speed Down
12. Zoom Wide
13. Zoom Tele
14. Start/Stop Patrol
15. Switch Active Monitor
Parameter: You can choose the parameter of the function from the drop-down menu.
Default: You can set the default setting for the joystick.
Export: You can export the setting of the joystick.
Import: You can import the setting of the joystick.
-
82 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
5.9 User Account Setting
Configure all user accounts under this settings page.
Note that this page is only accessible by the default admin account.
User
Add new users and modify or remove existing users.
You may choose to add Basic Users directly in the system or import users from MS Active Directory (MSAD) as
Windows Users.
*Note: Please remember to add your Windows login AD user account to the local PC's administrators user group. Main Console can be launched by administrators only.
User account Setting
Delete Basic User
Automatic Synchronize
Windows User Setting
Add Basic User Add/Remove/Synchronize Windows User
Basic Users
Click on to add a new Basic User. Click on to delete an existing Basic User.
Create and modify the content of each user account under User Account Setting:
Name: Insert the user name.
Group: Assign the group for each user.
There are 3 default privilege profiles of account groups:
Admin: Have privileges of all system functions and devices, except adding/deleting/modifying privileges of other users.
Power User: Have limited privileges of system functions and complete privileges of assigned devices.
User: All the privileges of system functions are forbidden. Users can only manage assigned devices.
Description: Insert the description related to each user.
Password: Insert the password assigned to each user.
Password confirm: Insert again to confirm the password.
Disable User Account: By checking this option, the account’s access to the system will be blocked.
Disabled accounts will be marked with a cross on the icon .
Note: Only the default admin account cannot be disabled.
Keep remote login for ___ minutes: Insert the duration to auto kick out account after logging in from
Remote Live Viewer or Remote Playback server.
-
83 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
Windows Users
Click on to add/remove/synchronize Windows Users.
Select User
Check users or folders under Select Active Directory user(s) and click OK to add Windows Users.
Click Select All to check all available users and folders, or click
Deselect All to uncheck all users.
Group Mapping:
Selected Windows users will be grouped according to default mapping:
MSAD Group
Administrator
Main Console Group
Admin
Guest
Other
User
PowerUser
You may modify group setting for each user later under the User
Account page.
Click OK when you are done adding Windows users.
Synchronization results will be displayed for confirmation.
Please refer to the default solution for all conflicts:
New accounts added from AD domain:
Add to Main Console
Accounts from AD domain removed:
Delete from Main Console
Account description modified:
Ute description
Encountered admin account:
Skip admin account
Newly added account from AD domain conflicts with existing basic user account:
Replace basic user account
Uncheck items to skip applying solution to Main Console user account settings.
For example, if you uncheck an “Add to Main Console” solution, the new account will not be added to Main
Console’s user account list.
-
84 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
Automatic Synchronize Windows User Setting
Instead of manually adding and uting Windows users, you may also configure the system to automatically synchronize all Windows users at a specific period. Click on to do this.
Automatically synchronize Windows users:
Check to enable automatic synchronization.
Synchronized period:
Configure the synchronization to start every ___ days.
Synchronized time:
Define at what time the synchronization should start.
Note: Auto synchronization will apply all default solutions to conflicts.
Privilege: Define detailed privilege of functions and devices for each user account.
Privilege
Copy Privilege to…
Function: Configure settings, operation related, system configuration, and privilege of remote access.*
Device: Configure device privileges of camera, digital output and metadata sources in Main Console and client applications.
Copy Privilege to…: Click on this button to copy privilege settings of any account to another.
Note: The privilege of default admin account is not configurable.
“Setup TV-Out function” is not available if there is no SCB-7108/7116 card installed.
-
85 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
5.10 Auto Backup Setting
Configure your system to automatically backup video data on a daily or weekly basis.
* Note: This function is not available under NUUO NVR Lite license.
Auto Backup Config: Configure auto backup settings on this page.
Enable Schedule Backup: Check to enable backup process.
Select Camera(s) to Backup: Choose all channels to backup.
Option
Location: Define backup route.
Backup Playback System: Check to backup the playback application with each process.
Send Mail when Backup Failed: Check to receive an email notification when backup fails. Click Setup for email configuration. Select one or more contacts from the address book and configure customized message content.
Recurrence: Choose start time and Recurrence: Daily or Weekly modes.
Auto Backup Statistic: Shows statistics on current or latest backup status. Click Refresh to ute.
Refresh
Current Backup Status:
Idle: not active or awaiting next backup process
Backup…: Backup under process
Retry…: Previous backup failed, awaiting retry
Next Backup Start Time: Scheduled time for next backup process
Next Retried Process Time: Scheduled time for next backup retry process. N/A when status is Idle or under Backup.
-
86 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
Last Backup
Last Backup Start: Time and date last backup started.
Last Backup Stop: Time and date last backup was complete or had failed.
Backup Video Period: Total time spent on last backup process.
Backup Size: Total file size of last backup.
Backup Result:
Completed: Last backup succeeded.
Failed: Last backup failed, under retry process.
Timeout: Last backup failed, retry process timed out.
5.11 License Manager
The license of the software should be registered first before operating the former version of Intelligent Surveillance System.
Execute the License Management Tool in Config >License
Manager to activate the license from dongle or serial number allocated with the software package, or de-activate the license then bring it to another PC to activate it again.
Note:
Please refer to page 124 for the detail setting of License
Management tool.
5.12 Save/ Load Configuration
The Save/ Load Configuration function allows system users to save any specific setting as a CFG (config) file. You may save several different CFG files at a time.
Save Configuration: To save a specific setting, go to Config - Save/Load Configuration - Save. In the popup window, type in the file name and then save it as a CFG file.
Load Configuration: To load a specific setting, go to Config - Save/ Load Configuration - Load. In the popup window, go to the directory that you saved the CFG files at, select any one of them and then click OK to load the file.
Note: Main Console will be automatically shut down after loading a new configuration. Restart Main
Console manually.
-
87 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
5.13 TV-out Setting
* Note: This function is not available if there is no SCB-7108/7116 card installed.
After installing a SCB-7108/7116 card, a new feature will be added in Main Console automatically, click on
「 General Setting」and select 「TV-Out Setting」.
「 TV-Out Setting」 window appears.
TV-Out Monitor Camera Monitor Display
Auto Scan TV Adjustment Miscellaneous
TV-Out Monitor: Display all SCB-6000/7000/7100 series cards installed in this computer, choosing SCB-7100 series one to click on for TV-out function then users can start to edit the right parts.
Camera: Displays a list of all cameras.
Monitor Display:
Modify the cameras shown on Monitor Display in the right window. Show the video cameras
-
88 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
which are playing in sequence. Choose the cameras in Camera (Multiple choice), then click , the system will have the selected cameras show below Monitor Display. If user wants to remove the cameras, select the cameras then click , the system will remove from the list.
Auto Scan: Set “Layout”, “Primary channel”, the form of “Secondary channel” and the interval time of
“Auto-scan interval”.
TV Adjustment:
Users can adjust the position of TV-out screen by this function. Click the settings back to default value.
Miscellaneous: "Enable OSD display" and "Enable manual TV-Out pop-up" settings.
to apply all
5.14 Video Analytics - Counting Application
Count objects, people or vehicles passing through pre-defined detection zones.
To access this page, login with admin account or user account with privilege of configuring main system.
* Note: This function is not available under NUUO NVR Lite license.
Camera List
Operation
Start Simulation
Options
Runtime
Camera List: Select which camera would enable counting application.
Operation:
Define detection zones: Defined the detection zona.
Define object size: Defined the size of the object to count.
Options: 1Way Counting will take objects going from Region 1 to Region 2 as one count. In 2 Way Counting mode, it counts either going from Region 1 to Region 2 or from Region 2 to Region 1.
Runtime: Check the boxes to show the counting result on the screen and/ or show object bounding box, which draws the shape of the object that the system detects in red squares. You can choose from the drop-down menu of how long you want to reset the counting number.
Start Simulation: Click to test the setting.
-
89 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
5.15 Video Analytics – Privacy Mask
Mask your video with dark areas to protect your privacy.
To access this page, login with admin account or user account with privilege of configuring main system.
* Note: This function is not available under NUUO NVR Lite license.
Privacy mask settings will apply to local and remote live view, web live view, local playback, remote playback and web playback.
Camera List
Preview
Rectangle Count
Clear All
Camera List: Check cameras to enable privacy mask.
Regional Definition: Click and drag to define privacy masked areas.
Rectangle Count: Maximum 10 rectangles can be drawn to define privacy masked areas.
Clear: Click to clear all rectangles.
5.16 Metadata Application
* Note: This function is not available under NUUO NVR Lite license.
The Metadata application now supports three different data types, including POS, LPR and access control.
This tool can be used to configure these devices. Note that you will need additional licenses to use these
for more details.
-
90 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
5.17 Network Service
There are 5 types of network services:
Live streaming server, Remote playback server, 3GPP service, Remote
Desktop, and Central Management Service. From the Main Console, go to
Config - Network Service to obtain the Network Service panel.
An icon shows for each network service in the information window of Main
Console when started. See 1.1 User Interface Overview for details.
LiveView Playback 3GPP Desktop CMS
Start
Stop
5.17.1 Live Streaming Server
When starting the live streaming function of computer, the system allows remote users to log in to the specific computer and view cameras that are connected to it. As system administrator, user could be able to monitor these accounts in order to maintain the system efficiency.
Main
On Live Streaming Server panel, administrator can see all the clients who are currently logging in to the computer and watching the live video from the remote side.
Client list
Service
Options
Client list:
Client Count: Show the amount of channels that are connecting to system.
Kill Client: Highlight an IP address and click on the “Kill Client” button to block the client from your client list.
Kill All Clients: Click on this button and all clients are blocked from logging into your system.
Service:
Server Status: Click on Start/Stop to turn on/off this option.
-
91 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
Options: Adjust the setting only when the server is stopped.
Port: Assign a port for the clients to connect to your system via Remote Live Viewer. Default port is 5150.
Maximum Connections: Number of connections that are allowed to connect to the system. Default is 16 channels and maximum is 128, one camera video counts as one connection.
Use Default Web Server: Activate the Web server by checking the box; clients will be able to watch live video via Internet Explorer. The port for live streaming server is set to 80 by default.
Note: This must be checked in order to access system via IE*.
Save Log: Save the log information at appointed folder.
Enable Audio: Select this option to enable the audio transmission along with video stream.
Black / White List
Enable list
IP address
Black/ White list
Apply to all
White List: Check the “Enable White List” box to activate the white list filter. Only IP from the white list is allowed to log in.
Black List: Check the “Enable Black List” box to activate the black list filter. IP from the black list will be blocked.
IP Address: Enter an IP address into the IP address field on the left. To add an IP address range to the system, enter 2 sets of IP address to indicate a series of IP(s).
Add/Delete: Add the IP(s) onto the list or remove it from the list.
Apply to All Network Servers: Apply the settings to both the live streaming server and the remote playback server.
-
92 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
Performance
Total bit rate Individual Camera bit rate information
Live Streaming Server log information
5.17.2 Remote Playback Server
When starting the remote playback function, the system allows remote users to log in to the specific computer and withdraw data files that are stored on it. As system administrator, user could be able to monitor the accounts logging in to maintain the system efficiency.
Main
On Remote Playback Server panel, administrator can see all the clients who are currently logging in to the computer and watching the playback video from the remote side.
Client list
Service
Options
-
93 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
Client list:
User Count: Show the number of users that are connecting to system.
Kill Client: Highlight an IP address and click on the “Kill Client” button to block the client from your client list.
Kill All Clients: Click on this button and then block all the clients logging to your system.
Service:
Server Status: Click on Start/Stop to turn on/off this option.
Options: Adjust the setting only when the server is stopped.
Port: Assign a port for the clients to connect to your system via Remote playback server. Default port is
5160.
Maximum Users: Number of connections that are allowed to connect to the system. Default is 8 users and maximum is 64.
Note: One user counts as one account that is logging in to the server.
Use Default Web Server: Activate the Web server by checking the box; clients will be able to watch live video via Internet Explorer. The port for live streaming server is set to 80 by default.
Note: Must check this item for system access via IE*.
Save Log: Save the log information at appointed folder.
Black / White List and Performance - Please refer to Live Streaming Server section
-
94 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
5.17.3 3GPP Service
When starting the 3GPP service function of your computer, the system allows remote users to log in and view cameras that are connecting to it with 3GPP supported mobile phone. See Appendix A for more details about 3GPP Service.
Client list
Client list:
Client Count: Show the number of channels that are connected to system.
Service:
Service
Options
Server Status: Click on Start/Stop to turn on/off this option.
Options: Adjust the setting only when the server is stopped.
Port: Assign a port for the clients to connect to your system via 3GPP Service. Default port is 554.
Enable User Authentication: User need to insert the username and password to login to the 3GPP server and view the video stream.
5.17.4 Remote Desktop
When starting the Remote Desktop, the system allows remote users to use NUUO Remote Desktop Tool to login and configure system. See Appendix B to install and use this tool.
Option
Authentication
Server Status
-
95 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
Options:
Port: Assign a port for NUUO Desktop tool to login and configure system.
Disconnect idle client after (300~3600 sec): Auto disconnect the on-line user who idled more than set period.
Authentication:
Enabling this option would only allow admin account to use NUUO Desktop tool to login system.
Service:
Server Status: Click on Start/Stop to turn on/off this option.
5.17.5 Central Management Service
* Note: This function is not available under NUUO NVR Lite license.
This service only supports NUUO Central Management System (NCS). Having started the Central
Management Service, Main Console sends event information to NCS and allows the NCS system to control
I/O devices from a remote site.
Note:
1. To enable this action, go Guard >Action and select “Send to Central Server” to enable the action triggered by preference event.
2. Please refer to the user manual of NUUO’s Central Management System for detailed information.
Client
Service
Options
Client list:
Client Count: Show the amount of NCS Servers that are connected to system.
Kill Client: Highlight an IP address and click on the “Kill Client” button to block the client from your client list.
Kill All Clients: Click on this button and then block all the clients logged in to your system.
Service:
Server Status: Click on Start/Stop to turn on/off this option.
Options: Adjust the setting only when the server is stopped.
Port: Assign a port for NCS System to connect Main Console system. Default port is 5170.
Number of connections from NCS Servers that are allowed to connect to the system. The default is 8
NCS Servers and maximum is 16.
5.18 Help
Click Help to connect to FAQ of NUUO website http://support.nuuo.com/mediawiki/index.php/Main_Page .
-
96 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
5.19 About Main Console
Go to About Main Console for detailed system and license information.
5.20 Video Source
Note: Not supported under Lite license
Step 1: Go to Video Source to adjust the Video Standard to NTSC or PAL.
Step 2: Adjust the maximum Video Resolution for all analog cameras.(MPEG4 only)
Video Resolution
Turbo mode
Standard mode
High Quality mode
Frame Rate
Higher
Normal
Lower
Quality
Lower
Normal
Higher
Step 3: For MPEG4, click “Sync all video signal level” after pressing OK to synchronize video signal level to the optimized display (Auto-gain control).
For HD, click “Sync all video signal level” to auto detect video resolution (1080P/720P)
-
97 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
6. E-Map
With E-Map, users can easily track the actual location of an occurring event, at the moment it happens.
The arrow and lightning icons on E-Map represent cameras and I/O devices. These icons will turn red once they are triggered by alarms.
To launch the E-Map application, simply click on Start and select Open E-Map from the start menu for the E-Map window.
There are 2 modes available in the E-Map application:
Edit mode : Allows users to add/edit maps and indicators of devices. In Edit mode, the function buttons on the bottom of the window will be available. Please complete configurations before running E-map function for the first time.
Operate mode : All settings will be activated in this mode.
-
98 -
The Intelligent Surveillance Solution
6.1 Edit Mode
All E-map modifications must be configured in Edit Mode.
NUUO NVR/DVR/Hybrid NDVR System
Edit mode/ Operate mode
Switch button
Function button
6.1.1 Add/Edit/Delete Map
Add E-Map:
Step 1: Click on the switch button to switch to Edit mode. Make sure all devices are connected and setup properly.
Step 2: Right click on the Map icon in device and map list to obtain the option menu to add map, or just click “Add Map” button to obtain the “Map Config” dialog.
Step 3: Select the map file and insert the map name. Click OK, and then the map you added appears in the tree structure of device and map list.
Step 4: The map indicator appears on the left-up corner of parent map. Drag it to the position you want on appointed map.
Edit E-Map:
Step 1: Make sure you are in Edit mode and all devices are connected and inserted.
Step 2: Right click on the “Map ” icon to obtain the option menu to edit map, or just click the “Edit
Map” button to obtain the “Map Config” dialog.
Step 3: Modify the required details, and then click OK to save configuration.
Delete E-Map:
Step 1: Make sure you are in Edit mode and all devices are connected and inserted.
Step 2: Right click on the “Map ” icon to obtain the option menu to delete map, or just click the Delete button to remove appointed map from list.
Note: The root map cannot be deleted.
-
99 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
6.1.2 Add/Rotate/Delete Device Indicator
Add Indicator:
Step 1: Make sure you are in Edit mode and all devices are connected and inserted.
Step 2: Click on the “ Map” icon to go to the desired map layer.
Step 3: Please make sure the map you want is displayed. Select device from the list and drag a device directly to the desired location on the map.
Note: Different devices are symbolized by different indicators.
- Camera indicator, - Digital Input indicator, - Digital Output indicator
- Access Control indicator, -POS indicator, - LPR indicator
Rotate Indicator:
Step 1: Click on an existing camera indicator on your map under Edit mode. This camera indicator will be marked with a green ring .
Step 2: Each click on the Rotate button rotates the indicator 45 degrees clockwise.
Note: Only camera indicators are allowed to be rotated.
Delete Indicator:
Step 1: Click on an existing camera indicator on your map under Edit mode. This camera indicator will be marked with a green ring .
Step 2: Click on the Delete button and the indicator will be gone.
6.2 Operate Mode
After configuration under Edit mode, switch to Operate mode to commit settings.
6.2.1 Device and Map Tree list
Operate mode/ Edit mode
Switch button
This window will list all devices and map hierarchies; click device or map indicator to show related information on E-Map windows.
Map – Select the map you want to show on E-Map Window.
Camera – A preview of the selected camera will show in the preview window. The indicator, if previously created, will be highlighted on the map.
Digital Input/Output – Select to highlight the device with a green ring on the map and show status on
Information window. If the Digital Input/Output is from an IP camera, the preview window will display live video of the camera.
Access Control/POS/LPR – Select to highlight the Access Control / POS / LPR device with a green ring on the map, and display live video of the first associated camera on the preview window.
-
100 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
6.2.2 E-Map picture
This window will show the map layer and indicators.
Device Indicator:
Select device indicators from the Device and Map Tree list for related information and to preview video.
Map indicator:
Selecting a map indicator will bring you to that map layer. To return to an upper layer, right click on the map and select UP or click on the map layer.
6.2.3 Information and Preview windows
This window will show the related information of each indicator.
Map Info – Shows map name.
Camera – Shows camera name and connection status.
Digital Input/Output – Shows Digital Input / Output name and status (0 or 1).
Access Control/POS/LPR – Shows metadata device name, connection status, first associated camera name and connection status.
6.3 Layout Adjustment
Triangular
indicator
Shrink the window:
Click on “ Triangular indicators” to hide the “Device and Map” or
“Preview” and “Information” windows on the right and left sides. Click again to go back to the default layout.
Full screen display :
For systems with dual monitor, users can view Main Console on the primary monitor, and view a full-sized E-Map on the secondary monitor.
Step 1: Click on “ Triangular indicators” to hide the “Device and
Map” or “Preview” and “Information” windows on the right and left sides.
Step 2: Click “ ” on the upper-right corner of the window for the full screen mode of E-Map.
-
101 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
7. Log Viewer
View the history and export reports of unusual events detected by the Smart Guard System.
To launch Log Viewer, simply click on Config and select Log Viewer from the menu.
-
102 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
7.1 System Log
Step 1
Step 2
Step 3
Step1: Choose the type of event you want to check or select All from the drop-down menu for all types of events. Select Log Type form the drop-down menu. There are in total 36 types of log types, including:
Main Console Startup
Main Console Shutdown
User Login
User Login Failed
Start Schedule
Stop Schedule
Execute Recycle
Enable Channel
Disable Channel
Start Smart Guard
Stop Smart Guard
Modify Smart Guard
Modify Schedule
Modify Configuration
Start Live Streaming Server
Stop Live Streaming Server
Modify Live Streaming Server
Start Remote Playback Server
Stop Remote Playback Server
Modify Remote Playback Server
IP Camera Connection Lost
IP Camera Connection Regained
IP Camera Parameter Changed
Auto Restart Windows
Modify Metadata Setting
Metadata Connection Lost
Modify E-Map
Start Remote Desktop
Stop Remote Desktop
Modify Remote Desktop
Start Central Management
Stop Central Management
Modify Central Management
Start Counting Application
Stop Counting Application
IP Camera Connection Regained
Sync. Microsoft Active Directory User
IP Camera Parameter Changed
*Note: Detection of some system logs is not available under NUUO NVR Lite license.
Step 2: View the events that happened on a particular date or during a given time period by selecting search period.
For a particular date: check the Date box right and indicate the date.
For a period: check the DateTime and then enter the date and time.
Step 3: Click Search.
7.2 Export and Backup Log
View the Export and Backup Log history that had been operated by local or remote user.
Step1: Choose the type of event you want to check or select All from the drop-down menu for all types of events.
Step 2: View the events that happened on a particular date or during a given time period by selecting search period.
For a particular data: check the Date box right and indicate the date.
For a period: check the DateTime and then enter the date and time.
-
103 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
Step 3: Click Search
7.3 Unusual Event
Step1
Step2
Step 3
Step 4
Step1: Choose the type of events you wish to view or select All from the drop-down menu to view all. The types of Unusual Events include General Motion, Foreign Object, Missing Object, Focus Lost, Camera
Occlusion, Signal Lost, Disk Space Exhausted, System Health Unusual, Digital Input Triggered and
General Motion (Device).
* Note: Detection of some events is not available under NUUO NVR Lite license.
Step 2: Choose the camera channel you wish to view or select All for all channels available.
Step 3: View the events that happened on a particular date or during a given time period by defining a search period.
For a particular date: check and specify date in the Date box.
For a period: check the DateTime and then enter the date and time.
Step 4: Click Search.
Note: When working with a video record, as default, Log Viewer will search for Unusual Events in the video record in Date & Time mode, starting from the beginning to the end of the record.
A link ( ) will appear next to each event time where video is available.
By clicking on the link, an instant playback window will pop up to show recorded video.
Note: Instant playback is available under the following Smart Guard events: General Motion, Foreign
Object, Missing Object, Focus Lost and Camera Occlusion.
7.4 Counting Application
* Note: This function is not available under NUUO NVR Lite license.
Display the history of Counting Application during a given time period.
Step1: Select the channel you want to check or select All from the drop-down menu for all channels.
Step 2: Select search period. View the events that happened on a particular date or during a given time period by selecting search period.
For a particular date: check the Date box right and indicate the date.
For a period: check the DateTime and then enter the date and time.
Step 3 : Click Search.
-
104 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
Step 4: Press the button Export to.
Step 5: Type the file name and choose the file format (.xls or .txt).
7.5 Counting Application (Diagram)
* Note: This function is not available under NUUO NVR Lite license.
Display the Counting Application data in diagram format.
Step 4
Step1: Select the channel you want to check or select All from the drop-down menu for all channels.
Step 2: From the drop-down menu, set up how you would like the diagram to be displayed. You have the options of one day, one month, or one year.
Step 3: Select a specific date to make it the start point of the diagram.
Step 4: Click Search.
Step 5: Press the button Export to.
Step 6: Type the file name and the file will save as BMP files.
7.6 Metadata Log
* Note: This function is not available under NUUO NVR Lite license.
View the Metadata Log history detected by the Smart Guard System.
Step1: Choose the type of events you wish to view or select All from the drop-down menu to view all types of events. The types of Unusual Event include Transaction Start, Transaction End, Open Cash Register,
Connection Lost, and special User defined event. Please refer to the User manual of Metadata plugins for details.
Step 2: Choose the camera channel you wish to view or select All for all the channels available.
Step 3: View the events that happened on a particular date or during a given time period by selecting search period.
For a particular date: check the Date box right and indicate the date.
For a period: check the DateTime and then enter the date and time.
Step 4: Click Search. A link ( ) will appear next to each event time where video is available.
By clicking on the link, an instant playback window will pop up to show recorded video
Step 5: Press the button Export to.
-
105 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
Step 6: Type the file name and choose the file format (.xls or .txt).
7.7 Export
After each log search, export needed info to .xls or .txt files.
Step 5
Step1: Press the button Export to.
Step2: Type the file name and choose the file format (.xls or .txt).
Step 1
.xls .txt
-
106 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
8. Backup
The backup function saves recorded video and other log information. Backup files may be reloaded on any PC with the Playback System installed. Follow the instructions below for more information on obtaining backup files.
-
107 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
8.1 Backup Recorded files
Step 1
Step 2
Step 3
Step 1: Add (Remote) Backup Site: Press the “Remote Server ” button to go to remote backup site management to add and setup the backup site.
Enter the IP address or DNS, Port, Username, and Password.
Click Add to add the server.
Click OK to exit the Setting panel.
Step 2 : Access (Remote) Backup Site: Click on the icon and insert the username/password of the remote server to access the backup Site.
Step 3: Click on New Period to obtain the Select Date/Time Period panel.
Step 4: Select the data you want to backup by highlighting the time period. Besides the time-table, you may also set up start time and end time in the Date Time Period section. Step 6
Step 4
Step 5
Step 7
Step 5: Click on the camera number icon to add camera(s) or click to add/delete all the channels.
Step 6: Check the box of Enable Preview to get the preview of the video you select.
Step 7: Click OK when the settings are complete and go back to the Backup System panel.
Step 8: If there is any data period not wanted, click Remove Period to remove the data period on the backup list.
-
108 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
Step 8 Step 9
Step 9: Click the Backup icon to obtain Backup panel.
Step 10
Step 11
Step 12
Step 10: Summary: Check the summary section to see the size of the file(s).
Step 11: Media: Choose the path you want to save the file or burn the file into a CD (direct CD burning for
Windows XP only), DVD or on Hard Disk.
Step 12: Option: Select the log information you would like to backup (Event Log, System Log, Counter Log and Metadata Transaction), and then click OK.
8.2 Delete Recorded files
Step 1: Click on “New Period” to obtain the Select Date Time Period panel.
Step 1
Step 3
Step 2: Follow steps 3-7 above from the backup section to select data period which you want to delete.
Step 3: Click on the Delete icon and delete all the data in the backup list from the database.
Note: Deleted video cannot be recovered.
-
109 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
9. Remote Live Viewer
With the Remote Live Viewer console, remote users may watch up to 128 channels real-time video from remote live streaming servers.
* Note: Maximum 32 channels under NUUO NVR Lite license.
-
110 -
The Intelligent Surveillance Solution
9.1 Setting
Click General Setting to obtain setting dialog.
9.1.1 General Setting
NUUO NVR/DVR/Hybrid NDVR System
General Setting
Audio preview:
Enable audio on active channel: Select to enable audio streaming on active channel.
Miscellaneous:
Synchronize video frames: Select to avoid image tearing problems that may occur while CPU loading is increased.
9.1.2 Server setting
Server List
Step 1: Enter the Server Name.
Step 2: Enter the Address, Port, User Name, and Password to log in the server.
Step 3: Enable “Save Password” to login without entering the password again.
Step 4: Enable “Auto Login” to login automatically when starting Remote Live Viewer.
Step 5: Click on Test Server to check if the server is available.
Step 6: Click Add to insert the setting to server list.
Note:
To change the setting, select a server on server list and click “Ute” after modify setting.
To remove the server, select a server on server list and then click “Delete”.
-
111 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
9.1.3 Group Setting
Allocate different cameras into each appointed group.
* Note: Cameras under NUUO NVR Lite license cannot be included in a group with other servers.
Step 2
Step 4
Step 1
Step 3
Step 1: Log in to all the servers that contain the camera(s) you would like to put into the group(s).
Step 2: Click Insert to create a new group; name the group for future reference.
Step 3: From the window at the right, highlight the camera(s) that you would like to add to a group and then click on the “ <-- ” button. Repeat the process until satisfied with the group setting.
Step 4: Click on the Delete and Rename button to remove or rename a specific group.
Step 5: Repeat Steps 2 to 4 to adjust the group setting until satisfied.
Step 6: Click OK.
9.1.4 Camera Setting
Select the preferred stream type of each camera as default live view profile.
* Note: Some stream profiles are not available under NUUO NVR Lite license.
Stream profile: List differs according to different types of video inputs and licenses.
Auto: The system will adjust the stream type automatically to fit different screen divisions.
Recoded: The system will follow the stream profile set in Main Console >Schedule > Encoding Options.
-
112 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
High / Normal / Low/ Minimum / H.264: The system will follow the stream profile set in Main Console -
Setting - Camera - Stream Profile.
Original (IP only): The system will display the streaming directly from the IP camera and video server.
Copy to: Select in order to copy the preferred stream profile of a channel to all of the listed channels.
9.1.5 OSD Setting
Adjust font style of Camera OSD on this panel.
9.1.6 Metadata Setting
Adjust font style of Metadata overlay on panel.
* Note: This function is not available under NUUO NVR Lite license.
9.1.7 Monitor Display Setting
Activate auto scan to rotate the channels/ cameras on screen.
Note :
For instance, you may select to show only 4 sub-screens on the live viewer while having 16
channels connected to the system. With auto scan function, you will be able to see all 16 channels by turns.
Each monitor supports up to an 8x8 layout with auto scan function to show 128 channels.
-
113 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
Step 1
Step 2
Step 3
Step 4
Step 5
Step 1: Select the Monitor connected to the system.
Step 2: Auto scan group: Select appointed server group to activate auto scan settings.
Step 3: Primary channel: Select appointed channel that will always be on the screen when auto scan is activated.
Step 4: Secondary channel: Select appointed channel with secondary priority behind primary channel when auto scan is activated.
Step 5: Layout: Select the screen division of “NxN type” in Remote live viewer panel.
9.1.8 Notification Setting
Status display:
Show recording status: Check to show the crystal ball with recording status on monitor display.
Show camera event: Check to show the smart guard detected event appointed in Main Console on each channel.
Note: To execute this function, please configure “on screen display” as an action of Smart Guard instant response.
-
114 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
Show counting result: Check to show the counting result appointed in Main Console on each channel.
* Note: This function is not available under NUUO NVR Lite license.
Play Sound Alert:
Enable playing sound on event: Check to enable sound alerts on events.
Sound File: Choose a sound file to play. You may use the default file or define another.
Life Cycle: Choose to allow the sound alert to close when events disappear, or define a timer to close the sound alert automatically after a specific period of time.
Note: To execute this function, please configure “play sound” as an action of Smart Guard instant response.
Miscellaneous:
Popup system event: Check to allow system events appointed in Main Console to pop up messages as warning.
9.1.9 Joystick Setting
Settings are same to Main Console joystick settings. For details please refer to page 75.
* Note: This function is not available under NUUO NVR Lite license.
-
115 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
9.2 Server/Group/Camera
Display a complete list of the server(s), group(s) and camera(s) that are added to the system.
Server View : Cameras are listed according to recording server.
Group View : Cameras are listed according to customized grouping.
Server View Group View
9.2.1 login/logout server
Option1: Select a server on the list and click on LOG IN/ LOG OUT to access/ logout the server.
Option2: On the server list, right click to obtain menu options.
Log In/Log Out Server
9.2.2 Connect/Disconnect camera
Option1: On the server/camera list, double click on a camera to connect.
Option2: On the server/ camera list, right click on a camera to obtain the menu options to connect/ disconnect.
Connect/Disconnect Camera
Option3: Select a camera from the list, then drag it to where you want it to be displayed.
Option4: Play / Stop/ Drop: Select a camera/ video and click on this button to play/stop/disconnect a particular channel.
Play Stop Drop
9.2.3 Multiple Views:
Step1: On the server/camera list, select a camera and right click on it to obtain the menu options.
Step2: Select Duplicate Camera and the duplicate camera with green indicator will display below on camera list.
Step3: Double click on the duplicated camera to connect and display on screen.
9.3 PTZ Control
Control the movement of PTZ cameras. With cameras that support PTZ control, you can move, zoom, patrol,
-
116 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
adjust the focus, and set preset points of the cameras.
9.3.1 Preset/ Go
Adjust the camera view until satisfied. Click on the Set icon to define the current view as preset point 01.
Adjust the camera view again to setup preset point 02. Repeat the process until you finish setting up all preset points. Customize preset point names by defining names. Click on the Go icon and view the result of your setting.
Note: For the speed settings of PTZ camera, please configure from Main Console – Config – Setting - PTZ
Config.
9.3.2 Zoom
Click on the + and – signs to zoom in and zoom out the view.
9.3.3 Focus
You can select to have the camera focused near or far. To focus near means objects that are closer will be clearer than the objects that are further away. On contrast, to focus far means objects that are further will be clearer than the objects that are closer. Click on the Focus icon and select auto focus if you want the system to decide the focus point for you.
9.3.4 Patrol
To control PTZ camera to patrol around pre-defined path of preset points, click on Goto Preset Point – Start
Patrol / Stop Patrol.
Note: To setup patrol path, please setup on Main Console – Set Preset Point – Set Patrol.
9.4 On Screen Menu
Right click on the camera screen for the On Screen Menu, from which you can quickly adjust the setting of camera.
9.4.1 Enable Move / Area Zoom
With cameras that support PT function, click the Enable Move function to adjust the current camera’s view by clicking on the display screen. To cancel this function, right click on the screen and select Disable Move.
With cameras that support Area Zoom function, click the Enable Move/Area
Zoom function to adjust the current camera’s view by dragging a rectangle on the display screen. To cancel this function, right click on the screen and select
Disable Move/Area Zoom.
9.4.2 Enable Talk
*This feature is not available under NUUO NVR Lite License.
With cameras that support two-way audio, select enable talk to utilize the function.
9.4.3 Enable Audio
With cameras that support audio function, click the Enable Audio function to listen to the current camera’s audio by clicking on the display screen. To cancel this function, right click on the screen and de-select
Enable Audio.
9.4.4 Enable Digital PTZ
To enable the PTZ functions of the camera, select the Enable digital PTZ option. Use mouse wheel or click on the + and – signs to zoom in and zoom out on the camera, or drag a rectangle to enlarge the area.
The square flashing on the video grid indicate the correspondent view of the camera.
9.4.5 ImmerVision Lens Setting
*This feature is not available under NUUO NVR Lite License.
With cameras that support ImmerVision Lens. Right click on the display screen and select the mode of lens, original, PTZ mode, Quad mode and Perimeter mode. If the lens setting set as Quad, PTZ, or Perimeter mode, the Enable Digital PTZ option would become Enable ImmerVision digital PTZ.
-
117 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
9.4.6 Fix Aspect Ratio
For some special camera resolution, user can enable Fix Aspect Ratio to view original ratio video, or disable this option to stretch 3:4 to fit window.
9.4.6 Stream Profile
Select different level Stream Profiles to downgrade video quality for bandwidth concerns.
* Note: Some stream profiles are not available under NUUO NVR Lite license.
9.4.7 Instant Playback
To open the Instant Playback window of the camera, select the Instant Playback option and choose the period. The instant playback window allows the user to browse recorded video, take snapshot images and export video with audio and metadata transaction data.
* Note: This function is not available under NUUO NVR Lite license.
9.4.8 Duplicate Camera
Right click on any empty channel. You may duplicate cameras from any available servers here.
To browse recorded video
By simply clicking on the timeline you can view the video. Use the navigation tools below for advanced control.
- Play / Pause / Stop
- Speed up/Speed down
- Fast Forward/reverse frame by frame
- Play Previous / Next minute video
To keep a snapshot of the video clip
Pause the video at desired time point and click snapshot button saved or copied to clipboard.
To export recorded video
Select desired export period and click export button
. The snapshot is displayed and can be
. Additional options are available when exporting.
Adjust to original video resolution button is the tool to adjust the video to original video resolution.
Audio button turns the audio on / off.
Metadata button
9.4.8 Snapshot
is to enable / disable metadata transaction data overlay.
The snapshot function copies and captures a specific video image to the clipboard or to save as a bmp file.
The snapshot can be customized with/without OSD, metadata information and selectable range after digital zoom in.
9.4.9 Toggle Full screen
Switch to view video with full screen display. To disable the function, right click on screen and de-select option or simply press “ESC” to go back to original window.
9.5 Start Monitor
-
118 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
9.5.1 Multiple Monitor
Select Open Monitor to append monitor to view more live videos on multiple monitors. Each appended monitor has the same list and view control buttons as the Main monitor, with the exception of the Start,
Playback, and Setting buttons.
9.5.2 E-Map
Start Monitor
Select Open E-Map to obtain the E-Map window. The GUI map helps to locate devices easily and the information window helps to show the status of each device.
Map Info – Show map name.
Camera – Show camera name and connecting status.
Digital Input/Output – Shows Digital Input / Output name and status (0 or 1).
Access Control/POS/LPR – Shows metadata device name, connection status, first associated camera name and connection status.
9.5.3 I/O Control
Select to obtain the I/O control panel. Use the panel to view DI status and control DO devices remotely.
Note: Adjust the setting of I/O device in Main console – Config –
Setting - I/O Device first, the I/O control panel will display the device status based on these settings.
9.6 Playback
Select to obtain the Playback panel and view video remotely.
9.6.1 Add Remote Playback Site
Press the Remote Sever icon to go to remote playback site management to add and setup a remote playback connection.
Step 1: Enter the IP address or DNS, Port, Username, and
Password.
Step 2: Click Add to add the server.
Step 3: Click OK to exit the Setting panel.
9.6.2 Access Remote Playback Site
Go to Date/Time Panel and click on the icon on the top of the display window to access the Remote
Playback Site
-
119 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
10. Web View
Server IP
Remote Live Viewer Remote Playback Download Client Pack
Note: Make sure the Live Stream Server is enabled. Check 5.14 Network Service for more detail.
10.1 Server IP
Start Internet Explorer browser and enter the IP address or DDNS name of the server followed by the connecting port.
Example: http://192.168.1.16:8080/
Note: 192.168.1.16 is the IP address of the server.
8080 is the port specified in Use Default Web Server in Network Service.
To connect directly to Remote Live Viewer without additional login, you may input username and password in the URL.
Example: http://192.168.1.16:8080/liveview-htmlskin/LiveView.html?user=admin&password=12345
(Username: admin, password:12345 in this example)
10.2 Remote Live Viewer
Press this icon to use Remote Live Viewer which functions are the same as Remote Live Viewer. See page
110 for details.
10.3 Remote Playback
Press this icon to use Remote Playback which functions are the same as Playback except remote server
and backup functions. See page 34 for details.
10.4 Download Client Pack
Press to download client pack to install application based Remote Live Viewer and Remote Playback.
-
120 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
11. Utilities
A.
B.
C.
D.
Verification Tool
License Management Tool
Resource Management Tool
DB Tool
-
121 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
11.1 Verification Tool
The Verification Tool verifies whether the data created by the system has been tampered with. It is the process by which a digital watermark (a digital signature) is added to each recorded video frame to ensure its authenticity.
There are 3 types of data that can be verified by the Verification Tool:
1. File in (.DAT) (.264) format will be displayed as .
2. File in (.AVI) (.ASF) format will be displayed as .
3. File in (.BMP) (.JPG) format will be displayed as .
11.1.1Execute Verification Tool
Step 1: Execute Verification Tool from program files.
Step 1
Step 2: Insert the Administrator Password to log in.
Step 3: The Verification Tool appears after login.
11.1.2 Verification Tool Overview
Add File Add Folder Remove File Select All Video Preview
Play Verify Pause Stop
Add File: Click to insert the single file to list for verification.
Add Folder: Click to choose the folder with multiple files to list for verification.
Remove File: Click to remove indicated file(s) from list.
Select All: Click to select all files in list for verification.
Note:
1. Choose the file type first before selecting files. Only (.dat) (.264) (.avi) (.asf) (.bmp) (.jpg) are supported.
2. User can also drag files directly into the list for verification.
Video Preview: Check this column to preview video of selected file. Click on the buttons below the window to play , Pause and Stop the file.
Note: Preview of (.bmp) (.jpg) format is not allowed.
-
122 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
11.1.3 Verify Image/Video
Step 1: Select single or multiple files for verification.
Step 2: Click “verify ”to start verification.
Step 3: The verification result will show on the watermark column.
If a file was tampered with, it will show .
If a file passes verification, it will show .
Watermark
Verification report
Step 4: The verification report will indicate the information related to the verification.
-
123 -
The Intelligent Surveillance Solution
Activate
NUUO NVR/DVR/Hybrid NDVR System
11.2 License Management Tool
The license of the software should be registered before you start using the Intelligent Surveillance System.
Additional to essential camera licenses, you may also purchase licenses for the metadata application, including those for POS, LPR and access control.
Execute the License Management Tool to activate the license from dongle or serial number included with the software package, or de-activate the license then bring it to another PC to activate it again.
Please note different level licenses cannot coexist under one license server.
Upgrade licenses will replace lower level licenses into higher level ones.
Both “Online” and “Offline” status of PC environments are available on executing the tool to “activate” or
“transfer” the license. The following is a total of 4 types of license management process:
- To activate the license with PC connected to network, follow the Activation Online process.
- To activate the license with PC not connected to network, follow the Activation Offline process.
- To de-activate/transfer the license with PC connected to network, follow the Transfer Online process.
- To de-activate/transfer the license with PC not connected to network, follow the Transfer Offline process.
11.2.1 License Management Tool Overview
11.2.1Execute License Management Tool
Step 1: Execute License Manager Tool in config menu or installation folders.
Step 2: The “License Management Tool” will appear. Please refer below for the tool overview.
1.1.2 License Management Tool Overview
Activate tab
SN status
Activate type
Input type
Activate
Import offline license
-
124 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
Transfer
Transfer Tab
SN status
Transfer type
Transfer
11.2.2 Activate/Transfer License
11.2.2 Activate License
Activation Online
Step 1: Open License Manager Tool.
Step 2: Select On line as Activate type.
Step 3: Input the SN (Serial number)or Import SN file, and then click on Activate button.
Step 4: Restart Main Console if activation is successful.
Activation Offline
Step 1: Open License Manager Tool.
Step 2: Select Offline as Activate type.
Step 3: Click on Export offline pack.
Please note this license will bind with hardware configurations and it is not recommended to register with removable network devices.
-
125 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
Step 4: Save Request file, and then take it to another PC that is connected to the Internet.
Step 5: Execute OffLineTool.exe
click on Activate button.
in the other PC. Input the SN (Serial number) or Import SN file, and then
Step 6: Save License file, and then take it to original NVR system.
Step 7: Open License Manager Tool again, select Import offline license, then click Import button to activate.
Step 8: Restart Main Console if activation is successful.
-
126 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
11.2.3 Transfer License
Transfer Online
Step 1: Open License Manager Tool.
Step 2: Select Transfer Tab, and then check Online as Transfer type.
Step 3: Select SN and click on Transfer button.
Step 4: Restart Main Console if transfer is successful.
Transfer Offline
Step 1: Open License Manager Tool.
Step 2: Select Transfer Tab, and then check Offline as Transfer type.
Step 3: Select SN, and then click Transfer button to transfer SN.
Step 4: Save Request file. Restart Main Console if transfer is successful..
Step 5: Copy request file to another PC connected to internet.
Step 6: Execute OffLineTool.exe in another PC, check Transfer SN and click Transfer to send request file to license server.
-
127 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
Note: User needs to copy request file to another PC and send it to license server, otherwise the SN can’t be re-activated again!!
-
128 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
11.3 Resource Management Tool
The Resource Management Tool detects whether the system is operational.
Note: For further application of the Resource Management Tool, please refer to
11.3.1 Execute Resource Management tool
Step 1
Step 1: Open Resource Report from start menu.
Step 2: The Resource Management Tool will appear.
11.3.2 System Resource Overview
System Resource Instant Diagram
Issues and Suggestion
11.3.3 System Resource
Advanced
System Health: This item shows the system information, including “CPU Temperature”, “Motherboard
Temperature”, “CPU Fan Speed” and “Power Fan Speed”.
Note: User needs to install the “SpeedFan” first to gather the CPU and Motherboard temperature information.
CPU Loading: This item shows the percentage of CPU usage.
Memory Usage: This item shows the memory usage of system. “Memory Used” and “Memory Available” are included.
Logical Disk Free: This item shows the percentage of available disk space for storage.
Note: The disk directory will be the same as the one in MainConsole – Config – Setting – Storage - Location.
Network Utilization: This item shows the total bit-rate utilization for the upload and download of the computer.
11.3.4 Instant Diagram
Click each item in the list to obtain the instant system diagram. The “system resource” will be displayed as each variable in Vertical Axis; the unit of Horizontal Axis will be displayed as “Per Second”.
-
129 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
Vertical Axis
Horizontal Axis
11.3.3 Advanced Resource Report
Click the Advanced button to search and export system logs in “Search” tab and obtain the history diagram of an specified period in “Diagram” tab.
1. Search
Step 4
Step 3
Step 1
Step 2
Step 5
Step 1: Choose the system event type, and then select the standard percentage to search system log.
Step 2: Select the Date/Time duration to search system log.
Step 3: Click Search to start searching, the system logs will be listed below.
Step 4: Click Export to to save the system log in (*.xls) or (*.txt) format.
Step 5: Click OK to close the report window.
-
130 -
The Intelligent Surveillance Solution
2. Display
Step 1
Step 2
Step 3
NUUO NVR/DVR/Hybrid NDVR System
Step 4
Step 5
Step 6
Step 1: Choose the system event type.
Step 2: Select the Date/Time to draft history diagram.
Step 3: Setup the start time and duration for charting. User can choose “One Day”, “One Hour” or “One
Minute” as the duration.
Step 4: Click “Display” to start charting, the diagram will be displayed at below column.
Step 5: Click “Save” to save the diagram in (*.bmp) format.
Step 6: Click “OK” to close the report window.
-
131 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
11.4 DB Tool
The DB Tool repairs database files and Export configurations.
Warning: improper use of this DB Tool may cause loss of recorded video.
Step 1: Execute DB Tool from program files.
Step 1
Step 2: Enter the password of administrator to log in.
Step 2
11.4.1 Repair Database
This page has three repair method, Modify Location, Verify Only, and Repair.
For modify location:
NUUO Playback system can recognize all recording video in the folders listed on MainConsole - Config -
Setting - General page. For some reason, user needs to use Playback system to open recording video beyond storage location setting. For this propose, user could follow below steps to modify location by
DB tool.
Note: The default storage location is in the installation directory, (ex: C:\Program Files\NUUO\SCB_IP)
Step 1: Select Repair database.
Step 2: Select the repair Method as Modify Location.
-
132 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
Step 3: For add database location, please click on button and use URL to choose location.
For remove database location, please choose location form list and click on button to remove location.
Step 4: Click on Modify button to modify location. After modification, the Modify Result will show on the panel.
Example of modify database:
In certain cases where video data needs to be transferred from one PC to another PC, user will need to perform the following:
1. Manually copy all recorded video data from the default installation path or other user-defined storage path of the old PC.
Recorded video data
2. Manually paste all recorded video data to the default installation path or other user-defined storage path of the new PC
3. Follow previous page to add new location on new PC.
4. Old recorded video data can be viewed by NUUO playback system on the new PC.
For verify and repair proposes:
This tool is used to check and repair your database and recorded video with problems:
(1) If there are records in database, but no video file, use this DB Tools to delete records.
(2) If there are video files but no record in database, use this DB Tools to rearrange the database and find these records.
Step 1: Switch to Repair database windows.
Step 2: Select the repair Method as Verify Onlyd.
-
133 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
Step 3: Check the video location windows.
The system will list all video locations in table, but if there are any omit, please use to insert.
Note: After inserting location, the system will show files count below table.
Step 4: Choose the method of “Verify Only”, and click “verify”. This method will only check the files without modify. Verify result will show how many files broken or missing.
Step 5: Choose the method of “Repair (Complete)”, and click “Repair”. The Repair Result will show how many files are fixed and inserted.
Step 6: The repaired new database will replace the old one and the original database will change file names with extended repair date and time as below.
Note: Open Log is a tool to record the repaired database. It will record repair method, file operation, start time and end time.
11.4.2 Export Configurations
This tool is used when user wants to export all system configurations to backup, take to another PC for
NUUO technical trouble shooting.
Step 1: Press “Export”.
-
134 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
Step 2: Select the location you want to Export and type the name of the configurations.
Step 3: Press “Save” to start to import database.
-
135 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
12. Failover Agent
Failover Agent is a software to enable a spare recording server (the failover server) to take over the recording work once the regular recording server becomes unavailable. Hence the failover server and the
Failover Agent should always be installed on another computer.
Note:
Support IP+ and Video Encoder (no capture card)
-
136 -
The Intelligent Surveillance Solution recording service
NUUO NVR/DVR/Hybrid NDVR System
12.1. Services
Failover Agent runs two services:
Service failover service
Description
This service always runs and constantly checks the state of the relevant recording servers. This service enables any necessary takeover
This service enables the failover server to act as a recording server while the regular recording server is unavailable. This service starts when required, i.e. when the failover server takes over the recording work.
Note:
Failover Agent will failover video data only. Not for No event, alarm, metadata, I/O box, Advanced
Intelligent Video Surveillance.
12.2. Activate Failover License
Step 1: Open License Manager Tool in Start>>NUUO Failover Agent file.
Step 2: Select NUUO Activate Tool, check the PC in Online network environment.
Step 3: Insert the SN, SN file to activate license.
Step 4: After software license is activated successfully, please restart Main Console.
Note: Please refer to Utilities>>License Management Tool for advanced settings.
Step2
12.3. Start and Stop Failover Agent
To start Failover Agent:
Step 3
Click start button | All Programs | NUUO Failover Agent. Failover Agent will start and show its icon in the notification area (also “system tray”).
To stop Failover Agent:
1. Right-click on Failover Agent’s icon in the notification area. A menu will open.
-
137 -
The Intelligent Surveillance Solution
2. Click Exit from the menu that opens.
NUUO NVR/DVR/Hybrid NDVR System
Note:
One OnGuard (Software watchdog) can only connect with one Failover Agent. User cannot use two Failover Agent to monitor one Mainconsole at the same time.
Note:
Mainconsole and Failover Agent can not install on same server.
Note:
Failover Agent will start service when in 2 hours the regular recording server becomes unavailable 5 times and each time during 15 minutes.
12.4. Enable and Disable Failover Service
Failover Agent supports users to enable and disable its service after Failover Agent starts. By default, the
Failover Agent’s service is auto-enabled after the start.
If Failover Agent has been manually disabled, its icon in the notification area appears with a red cross on it
. To re-enable Failover Agent:
1. Right-click on Failover Agent’s icon in the notification area. A menu will open.
2. Click Enable from the menu that opens.
To disable Failover Agent:
1. Right-click on Failover Agent’s icon in the notification area. A menu will open.
2. From the menu that opens, select Disable.
12.5. Open Failover Agent
To open the Failover Agent that runs in the background:
1. Right-click on the Failover Agent icon in the notification area. A menu will open.
2. Select Open Failover Agent from the menu that opens.
-
138 -
The Intelligent Surveillance Solution
Failover Agent will open by showing its UI onscreen.
NUUO NVR/DVR/Hybrid NDVR System
12.6. Check Failover Agent Status
After the Failover Agent starts, its status can be checked by its icon in the notification area.
Failover Agent’s service is disabled. The icon has a red cross on it.
Failover Agent’s service is enabled.
12.7. View Version Information
Knowing the version of your Failover Agent is helpful when you contact for support. To know your Failover
Agent version info:
-
139 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
1. Right-click on the Failover Agent icon in the notification area. A Menu will open.
2. From the menu that opens, select About.
A small dialog will opens showing the exact version of your Failover Agent.
12.8. General Settings
Failover Agent features a General tabbed page to set the preference using Failover Agent.
To access General tabbed page:
Open Failover Agent as described in 12.4. Open Failover Agent . Failover Agent will open.
Make the settings that meet your need by referencing the following:
12.8.1. Startup
Startup group box sets how Failover Agent acts when it starts.
-
140 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
Featured settings are:
Settings
Auto Startup
Auto Login
Description
Sets Failover Agent to auto-start when the failover server re-starts up after accidental shutdown.
Sets Failover Agent to auto-login to enable failover service when it starts.
Default
Selected
(Enabled)
Selected
(Enabled)
Click OK button to apply the change and quit setting; or click Cancel button to quit setting without saving the change.
12.8.2. Password
Failover Agent features a password authorization to control whether to enable failover service. Users are requested to set up such password when they installed Failover Agent. If such password should need to change later, it should be changed here in this Password group box.
Featured settings are:
Settings
Old Password
Description
Enters the old password.
New Password Assigns the new password.
Password Confirm Enters the new password again.
Default
--
--
--
Click OK button to apply the change and quit setting; or click Cancel button to quit setting without saving the change.
Note:
Admin only between Mainconsole and Failover server.
Failover operation use ID: Admin only
Note:
We recommend if users renew user account, please connect OnGuard to Failover Agent and updates user information again.
12.8.3. Log File
Failover Agent supports recording its operation history into a log file for necessary data analysis. The log file is created in .txt format with “FailoverAgent” for the filename.
To access log file setting:
-
141 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
Setting
Field
Save Log
Description Default
Enables recording Failover
Agent’s operation history to a log file.
Selected
(Enabled)
Sets where to save the log file.
The storage where Failover
Agent is installed to, for example
C:\program files\nuuo
The log file is created in .txt format. Take a closer observation of such log file:
❶
❶
❶
❷
❸
❹
❶
Failover Agent launches.
❷
One or more changes are written to Failover Agent settings.
❸
Failover service is performed. The failover server takes over the recording server named “192.168.2.114” at IP address 192.168.2.114.
❹
Failover service stops. The failover server stops taking over the original recording server named
“192.168.2.114” at 192.168.2.114 and returns the recording work to it.
12.8.4. Storage
Storage group box assigns the storage to store the recorded videos and manages storage-related settings.
-
142 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
Featured settings are:
Settings Description
Location Adds new storage.
Deletes the selected storage.
Raises the selected storage to higher priority.
Brings the selected storage to lower priority.
Default
--
--
--
--
Enable Disk Load
Balance
Evenly distributes recording to multiple drives, which will increase system efficiency.
Deselected
(Disabled)
Note:
Keep video in failover server, not collect back to recording server.
12.8.5. Automatic Recycle
Automatic Recycle group box encloses the settings to delete the out-dated data to save storage space.
Featured settings are:
Settings
Recycle when disk space is less than
Only keep video for
Element Description
Radio button
Default
Enables the system to recycle.
Selected
(Enabled)
Field 10%
Radio button
Field
Sets the lowest remaining disk space for the system to start to recycle.
Enables the system to delete older videos.
Assigns a number of days to keep the recorded videos.
Deselected
(Disabled)
7 (by unit of day)
12.9. Server Settings
To access the server settings:
1. Open Failover Agent as described in 12.4. Open Failover Agent . Failover Agent will open showing
General tabbed page.
2. Click Server tab. Server tabbed page will open.
-
143 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
Make the settings that meet your need by referencing the following:
Note:
Support up to 8 Mainconsole servers to 1 Failover server and recommend to use 3 Mainconsole servers to 1 Failover server.
12.9.1. Set up A Server
To set up the regular recording server to take over when necessary:
1. In Server Name, Address and Port fields, enter the name, address and port number of the regular recording server to take over.
2. In User Name and Password fields, enter the user name and password to log in the regular recording server to take over.
3. In Priority field, enter the number (1-8) of the recording server priority. Priority 1 for the highest priority.
-
144 -
The Intelligent Surveillance Solution
4. Press Test Server button to check if the server is available.
NUUO NVR/DVR/Hybrid NDVR System
5. Press Add button to apply the setup. The recording server will be added to the server
Note:
Share same port (NUSP/NUPP) and support LAN only.
12.9.2. Change Server Setting
To make any change to an existing server setting:
1. On the server list, select the server to change.
2. Make change to the setting as described in 12.8.1. Setup .
3. Press Update button to apply the change.
Note: In this status, OnGuard and Failover Agent need to connect again to get Mainconsole server information.
12.9.3. Delete A Recording Server
To remove a server:
1. On the server list, select the server to delete.
2. Press Delete button to remove the selected server.
12.9.4. Server List
1. OnGuard have linked to Failover Agent but not connected yet.
-
145 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
2. OnGuard connects to Failover Agent
3. Failover Agent disconnect with Mainconsole
-
146 -
The Intelligent Surveillance Solution
4. Failover Agent is taking over Mainconosole now
NUUO NVR/DVR/Hybrid NDVR System
Note:
Failover Agent not support Web client, MSAD and DDNS.
12.9 Remote Live viewer and Remote playback
12.9.1Remote Live viewer
Display a complete list of the server(s), group(s) and camera(s) that are added to the system.
Server View : Cameras are listed according to recording server.
And pop up message with Failover is running.
Server View
Note:
Failover agent needs to connect remote live viewer or playback first then Failover agent will automatically connect to live viewer/playback and get failover recording.
Note:
For Failover agent recording, user still login original Mainconsole server and will automatically transfer to
Failover agent.
-
147 -
The Intelligent Surveillance Solution
12.9.2 Remote Playback
Go to Date/Time Panel and click on the
Playback Site
NUUO NVR/DVR/Hybrid NDVR System
icon on the top of the display window to access the Remote
Video records are displayed as a thin line on the time table. Check Show Recording Schedule to show the defined period for scheduled recording. It is shown as a thick line in light blue color for Failover recording mode.
-
148 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
13. OnGuard
OnGuard is the software watchdog attached to Main Console to watch over Main Console’s service on a regular recording server. OnGuard starts when Main Console launches and stops when Main Console quits.
-
149 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
13.1. Using OnGuard
Once the Main Console (the regular recording server) stops responding, OnGuard will prompt to restart the recording server by showing a dialog. Click OK to confirm to restart or click Cancel to quit Main Console for later manual restart.
Note the failover server (Failover Agent) won’t take over the recording server (Main Console) unless the recording server stops responding for 5 times within one hour.
13.2. Open OnGuard
To see OnGuard on screen, minimize Main Console by click button at the lower-left on Main Console screen. If OnGuard is minimized and therefore isn’t viewable, open it by taking the following action:
1. Right-click on its icon in the notification area. A menu will open.
2. From the menu that opens, select Open OnGuard.
OnGuard then opens.
-
150 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
OnGuard opens.
13.3. Quit OnGuard
If it is necessary to exit OnGuard, take the following action:
1. Right-click on its icon in the notification area. A menu will open.
2. From the menu that opens, select Exit.
OnGuard then quits.
13.4. Version Information
Knowing the version of your OnGuard is helpful when you contact for support. To know your OnGuard version info:
1. Right-click on the OnGuard icon in the notification area. A Menu will open.
2. From the menu that opens, select About.
A small dialog will opens showing the exact version of your Failover Agent.
-
151 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
13.5. Check Connection Status
To check OnGuard’s connection status with the remote Failover Agent:
1. Open OnGuard as described in 13.2. Open OnGuard . OnGuard will open onscreen.
2. Check the connection status in the Status box.
The information provided are:
Element
Type
Description
Type of the service connected to, which is Failover Agent.
IP Delivers the IP address of the Failover Agent connected to.
Description Delivers the connection status with the Failover Agent.
13.6. Log File
OnGuard supports recording its operation history into a log file for necessary data analysis.
To configure file log setting:
-
152 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
1. Open OnGuard as described in 13.2. Open OnGuard . OnGuard will open onscreen.
2. Find the Service box.
3. Select Save Log to enable log file and browse for a desire folder to save the log file; or deselect Save Log if log file isn’t needed.
The log file is created in .txt format with the filename “OnGuard”. The log file helps users to know the exact time when the recording server stops responding.
Take a closer observation of such log file:
-
153 -
The Intelligent Surveillance Solution
❶
❶
❶
❷
NUUO NVR/DVR/Hybrid NDVR System
❸
❹
❺
❻
❶ OnGuard Starts.
❷
OnGuard’s Failover Agent service starts. See 13.7. Failover Agent Service to know how to start it.
❸
Main Console quits.
Note:
Main Console abnormal quit then will log.
❹ Main Console launches.
❺
OnGuard becomes connected with the remote Failover Agent. The connection is initiated by the
Failover Agent.
❻
OnGuard is disconnected from the remote Failover Agent.
13.7. Failover Agent Service
The Failover Agent Service box delivers the status of OnGuard’s Failover Agent service. This box also features a setting to manage the port number of the Failover Agent.
-
154 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
Featured settings are:
Element Description
Server Status label This label delivers the status of OnGuard’s service for the Failover Agent. When the service is running it shows “Running”; otherwise it shows “Stopped”.
Default
--
Start button
Stop button
Press this button to start OnGuard’s Failover
Agent service.
--
Press this button to stop OnGuard’s Failover
Agent service.
--
Port setting Sets the port number of the remote failover server (Failover Agent) for communication.
5220 (Note)
Note:
5220 is the default port number which the recording server and failover server communicate with each other. The failover server relies on this port to gets the configuration of the recording server taken over.
-
155 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
13.8.Failover Agent and OnGuard Scenario
Scenario OnGuard mechanism
Generate dump file Auto recover and Mainconsole automaticlly login
Electricity off line
Network connection lost -
OS with close AP message
Virtual memory exceed limitation
Process delete
BSOD
Process hang over 15 minutes
Restart and with startup setting
Auto recover and Mainconsole automaticlly login
Auto recover and Mainconsole automaticlly login
Auto recover and Mainconsole automaticlly login
Restart and with startup setting
Auto recover and Mainconsole automaticlly login
Failover Agent mechanism
When Mainconsole generate 5 times dump file within one hour, Failover Agent will start to take over Mainconsole
Failover Agent starts to take over
Mainconsole
Failover Agent starts to take over
Mainconsole
When Mainconsole close 5 times within one hour, Failover Agent will start to take over Mainconsole
When Mainconsole exceed virtual memory limitation 5 times within one hour,
Failover Agent will start to take over
Mainconsole
When Mainconsole cancel 5 times process within one hour, Failover Agent will start to take over Mainconsole
Failover Agent start to take over
Mainconsole
When Mainconsole hang process over 15 minutes 5 times within two hours, Failover
Agent will start to take over Mainconsole
Note:
Failover Agent mechanism is default and fixed setting.
Appendix A – Smart Phone Client
See the sections below to find how to install and execute SP Client.
Note:
1. The different between Smart Phone Client is navigation of operation, user can only control client with phone buttons.
2. The resolution of SP Client is limited in 240*320 (QVGA).
-
156 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
1.1 Install Smart Phone Client
Step 1: Connect mobile device to the PC.
Step 2: Insert the installation CD and click on Smart Phone Client Installation to install application in device.
Step 3: Check the client application is installed completely in the mobile device.
1.2 Execute Smart Phone Client
1.2.1 Main Console setting
Step 1: Go to Config and select Network Service
Network Service
Step 2: Select “Live Streaming”, and then click “Start”.
Note: The “Port” selected here will be the same with the one in Smart Phone.
Live Streaming
Start
Port
-
157 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
1.2.2 Execute and Login
Step 1: Make sure your Smart Phone device is connected to network, and then go to Start - Programs - NUUO
Smart Phone Client to execute application.
Step 2: Insert Address, Port, Name and Password of the server and click on to login.
1.3 /Smart Phone Client Overview
There are 3 main pages of Client application: Monitor Preview, I/O Control and System Info. Switch between these buttons to adjust overall configuration.
1.3.1 Live View
Camera List
Live View
I/O control
System Info
Live Video Display
Log out
Display Live Video
-
158 -
Back to Camera List
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
Camera List:
Displays all “snapshots” of channels connected to server as camera list. Click on indicated snapshot to get the channel information, and then click on to display live video.
Note: The Screen Division and Refresh option could help to quick find the channel.
Screen Divisions Refresh
Live Video Display:
Live View panel could display “live video”, control PTZ, and snapshot. Click to go back camera list.
PTZ Control: Click on PT Control Panel and Zoom Out/In to control physical PTZ camera or adjust digital
PTZ under digital PTZ mode.
Note: To switch between “Digital PTZ” and “Physical PTZ”, simply click on button.
PT Control
Zoom Out/In
Preset Go: Click to select indicated preset point.
Snapshot: Click to take the snapshot and save it to default folder.
Full Screen: Click to toggle to the “Full Screen Mode”, right click on screen to obtain the PT control panel and disable full screen display.
Disable Full Screen
Enable Audio: Click to enable the audio of current channel.
1.3.2 I/O Control
Select “I/O Control” button to monitor status of DI/DO devices, and control DO devices.
I/O Device list
DI/DO Status
I/O Control
-
159 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
I/O Device list:
Select and monitor the device connected with Server.
DI/DO status:
Monitor the DI/DO status synchronized with Server, and then click Output button to trigger the DO action.
Gray icon indicates the normal status of DI/DO devices.
Red icon indicates the alarm status of DI/DO devices.
Green icon indicates the synchronization process.
1.3.3 System Info
Display the server and client information. Server information includes address, post, and version. Client information includes login user, count of camera and I/O device with access authority and version.
For NUUO’s latest release of Android application based client NUUO iViewer, please visit http://www.nuuo.com/ProductNode.php?node=11 for more information and product demo videos.
-
160 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
Appendix B – iPhone Browser
NUUO Live Streaming service can handle requests from iPhone’s Safari browser. This section will guide you how to use this feature with iPhone devices.
1.1 Configuration from NUUO server
Step 1: Go to “Config” and select “Network Service”
Network Service
Step 2: Select “Live Streaming”, and then click “Start”.
Note: The “Port” selected here will be the same as the web live view and web playback.
Live Streaming
Start
Port
1.2 Connect to NUUO server
Step 1: Make sure the I-phone is connected to the internet. Open Safari browser and enter the IP address or
DDNS “name” of the server followed by the connecting port.
Example: http://192.168.1.16:8080/
Note: 192.168.1.16 is the IP address of the server.
8080 is the port specified in “Use Default Web Server” in Network
Service.
Step 2: Enter user name and password to login NUUO MainConsole
Server, select camera to view live video.
1.3 Live Display
To view live video, select camera from list, use touch panel to zoom in the video.
To switch video, please click camera to view the video.
to back to list and select another
1.4 PTZ Control
With cameras that support PTZ function, the PTZ panel will show as picture.
User can control camera to pan, tile and zoom in/zoom out manually, or move to pre-set location by select PTZ preset point from drop down list.
For NUUO’s latest release of iPhone / iPad application based client NUUO iViewer, please visit http://www.nuuo.com/ProductNode.php?node=11 for more information and product demo videos.
-
161 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
Appendix C - Remote Desktop Tool
How to install NUUO Remote Desktop Tool
Step 1: Insert the Installation CD.
Step 2: Go to Remote Desktop Viewer directly and Run Setup.exe file.
How to Start NUUO Remote Desktop Tool
Step 1: Start - All Programs - NUUO Remote Desktop Viewer - Remote Desktop Viewer.
Step 2: Enter address, Port, Password of server. Enable the option to use 8 bits color level to show steadier screen.
Step 3: Click OK to Start Remote Desktop.
-
162 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
-
163 -
The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
-
164 -
Advertisement
Key features
- Live view of all cameras
- Event recording and playback
- Advanced configuration options
- Support for IP cameras and DVRs
- User-friendly interface
- Remote access capability
