22

LED Monitor

22

144021120971K

www.sceptre.com

User Manual

www.sceptre.com

SAFETY INSTRUCTIONS

Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in electric shock and / or fire. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of your Liquid Crystal Display, please read the following precautions carefully before using the product.

1.

Read these instructions.

2.

Keep these instructions.

3.

Heed all warnings.

4.

Follow all instructions.

5.

Do not use this apparatus near water.

6.

Clean only with dry cloth.

7.

Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8.

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A

polarized plug has two blades with one wider than the other. A grounding type

plug has two blades and a third grounding prong. The wide blade and the third

prong are provided for your safety. If the provided plug does not fit into your outlet,

consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at the

plugs, convenience receptacles, and the point where they exit from the

apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by

the manufacturer, or sold with the apparatus. When a cart is used,

use caution when moving the cart/apparatus combination to avoid

injury from tip-over.

13. Unplug this apparatus during lightening storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when

the apparatus has been damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to rain or moisture, does not

operate normally, or has been dropped.

15. No naked flame sources, such as lighted candles, should be placed on the

apparatus.

16. The mains plug/appliance coupler is used as disconnect device. the

disconnect device shall remain readily operable.

17. Do not install this equipment in a confined space such as a book case or similar

unit. The ventilation should not be impeded by covering the ventilation openings

with items such as newspaper, table-cloths, curtains etc.

- 1 www.SCEPTRE.com

SCEPTRE E19 HD Display User Manual

SAFETY INSTRUCTIONS

CONSIGNES DE SCURIT IMPORTANTES!

1.

LIRE ces consignes.

2.

CONSERVER ces consignes.

3.

RESPECTER tous les avertissements.

4.

SUIVRE toutes les consignes.

5.

NE PAS utiliser cet appareil à proximit de l’eau.

6.

NETTOYER UNIQUEMENT avec un chiffon sec.

7.

NE PAS OBSTRUER les orifices de ventilation. Installer conformment aux instructions du constructeur.

8.

NE PAS installer à proximit de sources de chaleur telles que les radiateurs, les grilles de chauffage, les cuisinières et les autres appareils (notamment les amplificateurs) dgageant de la chaleur.

9.

NE PAS neutraliser le dispositif de scurit que constitue la fiche polarise ou à broche de terre.

Une fiche polarise a une lame plus large que l’ autre. Une fiche à broche de terre est munie de deux lames et d’ une troisième broche pour la terre. La lame large ou la troisième broche est prvue pour la scurit de l’ utilisateur. Si la fiche fournie ne rentre pas dans la prise de courant, demander à un lectricien de remplacer cette prise d’ un type trop ancien.

10.

PROTGER le cordon d’alimentation en s’assurant qu’il ne risque pas d’tre pitin ou cras, en particulier près des fiches, des blocs multiprises et de son point de sortie de l’appareil.

11.

UTILISER UNIQUEMENT les accessoires prconiss par le constructeur.

12.

UTILISER EXCLUSIVEMENT avec un chariot, un support, un trpied, une console ou un bti recommand par le fabricant ou vendu avec l’appareil.

Lorsqu’un chariot est utilis, faire preuve de prudmence pour dplacer l’ensemble chariot/appareil afin d’viter un renversement pouvant causer des blessures.

13.

DBRANCHER cet appareil en cas d’orage ou lorsqu’il reste inutilis pendant une longue dure.

14.

CONFIER tout travail de dpannage à un rparateur professionnel comptent. Faire rparer l’appareil en cas de dommages, par exemple: fiche ou cordon d’alimentation endommag, liquide renvers sur l’appareil ou objet insr dans l’appareil, appareil expos à la pluie ou à l’humidit, mauvais fonctionnement ou après une chute.

15.

Aucune source de flamme ouverte, telle que les bougies allumées, ne doit être posée sur cet appareil.

16.

Le coupleur secteur prise/appareil est utilisé en tant que dispositif de déconnexion, le dispositif de déconnexion restera immédiatement disponible.

17.

Ne jamais installer cet appareil dans un espace confiné comme le coffre à livre ou autres endroits similaires. La ventilation ne doit pas être entravée par des objets bouchant les ouvertures d’aération tels que les journaux, nappes, rideaux etc.

- 2 www.SCEPTRE.com

SCEPTRE E19 HD Display User Manual

SAFETY INSTRUCTIONS

Never place a display set in an unstable location. A display set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

1.

Use only cabinets or stands recommended by the manufacturer of the display set.

2.

Use only furniture that can safely support the display set.

3.

Make sure the display set is not overhanging the edge of the supporting furniture.

4.

Do not place the display set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the display set to a suitable support.

5.

Do not place the display set on cloth or other materials that may be located between the display set and supporting furniture.

6.

Make sure to warn and educate children about the dangers of climbing on furniture to reach the display set or its controls.

7.

Keep a minimum distance of 5 cm around all edges of the display for sufficient ventilation.

8.

The ventilation should not be impeded by covering the ventilation openings wi th items, such as newspapers, table-cloths, curtains, etc. Install in accordance with the manufacturer’s instructions.

9.

No naked flame sources, such as lighted candles, should be placed on the ap paratus.

10. Operating environment: temperature: 5°C~35°C, Humidity: 10% to 90% noncondensing, altitude: 0~2,000 m.

- 3 www.SCEPTRE.com

SCEPTRE E19 HD Display User Manual

IIMPORTANT INFORMATION

- 4 www.SCEPTRE.com

SCEPTRE E22 Display User Manual

IIMPORTANT INFORMATION

Dispose unwanted electronics and batteries through an approved recycler.

For display please visit the web at http://www.earth911.com/recyclingguide/how-to-recycle-large-electronics/

For Batteries please visit the web at http://www.call2recycle.org/

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to part 15 of the FCC Rules. Please refer to the last page for further references.

The house icon identifies that this product is for indoor use.

- 5 www.SCEPTRE.com

SCEPTRE E22 Display User Manual

x x

This product is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent the product from being damaged, the following rules should be observed for the installation, use and maintenance of the product. Read the following safety instructions before operating the display. Keep these instructions in a safe place for future reference.

x x x x x x x

To avoid the risk of electric shock or component damage, switch off the power before connecting other components to the display.

Unplug the power cord before cleaning the display. Please use the included custom bezel cleaning cloth for cleaning the bezel of the display only. Do not use a liquid or a spray cleaner for cleaning the product. Do not use abrasive cleaners.

Always use the accessories recommended by the manufacturer to insure compatibility.

When moving the display from an area of low temperature to an area of high temperature, condensation may form on the housing. Do not turn on the display immediately after this to avoid causing fire, electric shock or component damage.

Do not place the display on an unstable cart, stand, or table. If the display falls, it can injure a person and cause serious damage to the appliance. Use only a cart or stand recommended by the manufacturer or sold with the display.

Only use furniture that can safely support the display.

Make sure the display is not overhanging the edge of the support furniture.

Do not place the display onto tall furniture (such as cupboards or bookcases) without anchoring both the furniture and the display to a suitable support.

Do not place the display on cloth or other materials that may be located x x x x x x between the display and supporting furniture.

Be sure to educate your children regarding the dangers of climbing on furniture to reach the display or its controls.

Any heat source should maintain a distance of at least 5 feet away from the display, i.e. radiator, heater, oven, amplifier etc. Do not install the product too close to anything that produces smoke or moisture. Operating the product close to smoke or moisture may cause fire or electric shock.

Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of the display and to protect it from overheating, be sure these openings are not blocked or covered.

Do not place the display in a bookcase or cabinet unless proper ventilation is provided.

Never push any object into the ventilation slots of the display. Do not place any objects on the top of the

Product. It could short circuit parts causing a fire or electric shock. Never spill liquids on the display.

Do not use the display in a portrait format (by rotating 90 degrees) under high temperature environment (25°C or higher), since this would retard heat dissipation and would eventually damage the display.

The display should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.

- 6 www.SCEPTRE.com

SCEPTRE E22 Display User Manual

x x x x x x x x x x

The power cable must be replaced when using different voltage from that specified in the User Manual. For more information, contact your dealer.

The display is equipped with a twopronged plug.

Do not overload power strips and extension cords. Overloading can result in fire or electric shock.

The wall socket should be installed near the equipment and should be easily accessible.

Only the marked power source can be used for the product. Any power source other than the specified one may cause fire or electric shock.

Do not touch the power cord during thunderstorms. To avoid electric shock, avoid handling the power cord during electrical storms.

Unplug the unit during a lightning storm or when it will not be used for a long period of time. This will protect the display from damage due to power surges.

Do not attempt to repair or service the product yourself. Opening or removing the back cover may expose you to high voltages, the risk of electric shock, and other hazards. If repair is required, please contact your dealer and refer all servicing to qualified service personnel.

Keep the product away from moisture.

Do not expose this appliance to rain or moisture. If water penetrates into the product, unplug the power cord and contact your dealer. Continuous use in this case may result in fire or electric shock.

Do not use the product if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact your dealer immediately. Do not try to repair the product yourself.

x x x x x x x

Avoid using dropped or damaged appliances. If the product is dropped and the housing is damaged, the internal components may function abnormally. Unplug the power cord immediately and contact your dealer for repair. Continued use of the product may cause fire or electric shock.

Do not install the product in an area with heavy dust or high humidity.

Operating the product in environments with heavy dust or high humidity may cause fire or electric shock.

Hold the power connector when removing the power cable. Pulling the power cable itself may damage the wires inside the cable and cause fire or electric shocks. When the product will not be used for an extended period of time, unplug the power connector.

To avoid risk of electric shock, do not touch the connector with wet hands.

Insert batteries in accordance with instructions while using the remote control. Incorrect polarities may cause damage and leakage of the batteries, operator injury and contamination the remote control.

If any of the following occurs please contact the dealer: o

The power connector fails o o o o or frays.

Liquid sprays or any object drops into the display.

The display is exposed to rain or other moisture.

The display is dropped or damaged in any way.

The performance of the display changes substantially.

Operating environment: Temperature:

5°C ~ 35°C, Humidity: 10% to 85% non-condensing, Altitude: 0~2,000 m.

- 7 www.SCEPTRE.com

SCEPTRE E22 Display User Manual

Dear Sceptre Customer,

Congratulations on your new SCEPTRE E22 LED monitor purchase. Thank you for your support. To ensure safety and many years of trouble free operation of your LED monitor, please read the manual carefully before making any adjustments, and keep them in a safe place for future reference. We hope you enjoy your new SCEPTRE monitor.

For technical assistance, please call 1800-788-2878 and select option 3 or email our tech support group at [email protected]

.

For all other inquiries, please call 1800-788-2878 and select option 4 or email our customer service group at [email protected]

.

Live Chat also available during business hours M-F 8:30AM-5:30PM.

We recommend you register your SCEPTRE monitor by going to our website http://www.sceptre.com/registration.html

.

- 8 www.SCEPTRE.com

SCEPTRE E22 Display User Manual

The SCEPTRE display is packaged in a carton. The size and weight of the product might be too heavy for 1 person to handle. In the event of that happening; it is recommended that the display package must be handled by a minimum of 2 or more persons. Since the glass can be easily scratched or broken, please handle the product gently. Never place the unit on a surface with the glass facing downwards unless it is on protective padding. When opening the carton, check that the product is in good condition and that all standard accessories and items are included. Save the original box and all packing materials for future shipping needs.

Package Contents

SCEPTRE Display x 1

Display Base x 1

Display Neck x 1

VGA Cable x 1

Power Cord x 1

User Manual x 1

Installation

Please read the user manual carefully before performing the installation. When an extension cord is required, use one with the correct power rating. The product should be installed on a flat surface to avoid tipping. Space should be maintained between the back of the product and the wall for proper ventilation. Avoid installing the product in the kitchen, bathroom or other places with high humidity dust or smoke, so as not to shorten the service life of the electronic components. Please ensure the product is installed with the screen in landscape orientation. Any 90° clockwise or counterclockwise installation may induce poor ventilation and successive component damage.

- 9 www.SCEPTRE.com

SCEPTRE E22 Display User Manual

IInstalling the Monitor Stand Assembly

1.

Insert the neck onto the back of the display. When inserting the neck make sure the metal plates on the neck go underneath the two metal plates on the display.

Insert the neck fully until you hear a clicking sound.

2.

Insert the neck (that is now attached to the display) into the base at a 45 degree angle.

- 10 www.SCEPTRE.com

SCEPTRE E22 Display User Manual

3.

With one hand securing the base, use the other hand to twist the monitor until there is a clicking noise and the monitor is aligned with the base.

4.

To finalize your installation of the display, please read the following: a.

If you are placing the display on a stand, we would recommend you to use a display safety strap (not included) in order to minimize the possibility of the display toppling over.

b.

If you are mounting the display on the wall c.

Make sure the wall is structurally safe for the weight of the display d.

Make sure the wall mount kit is compatible with the display e.

Read and follow all instructions provided by the wall mounting kit.

f.

Securely install all screws and connections.

- 11 www.SCEPTRE.com

SCEPTRE E22 Display User Manual

1.

To remove the stand, lay the monitor flat on a table. Press the button near the bottom of the monitor between the neck piece and the display itself. While the button is pressed down, pull the neck piece to remove the base + neck.

2.

The display’s mountain pattern is 75mm by 75mm using M4 x 10mm size screws.

- 12 www.SCEPTRE.com

SCEPTRE E22 Display User Manual

SAFETY INSTRUCTIONS

SAFETY INSTRUCTIONS

...............................................................................1

...............................................................................2

IMPORTANT INFORMATION

IMPORTANT INFORMATION

SAFETY INSTRUCTIONS

..........................................................................3

..........................................................................3

...............................................................................5

Opening the Package .......................................................................................8

Package Contents

Installation

............................................................................................8

........................................................................................................8

Installing the Monitor Stand Assembly

Removing the Stand for Wall Mounting

.............................................................9

..........................................................11

Table of Contents ...........................................................................................12

Identifying Front and Rear Panel ....................................................................13

Front View with Buttons .............................................................................13

Rear View with Connections ......................................................................14

Connections ...................................................................................................15

If You have HDMI Connection on Your Video Card… ...............................15

If You have VGA Connection on Your Video Card… .................................16

On Screen Display (OSD) Menu

QUICK START

COLOR

....................................................................17

..........................................................................................18

PICTURE ...................................................................................................19

.....................................................................................................21

SYSTEM ....................................................................................................22

Supported VGA Resolution

Supported HDMI Resolution

Troubleshooting

............................................................................23

..........................................................................23

.............................................................................................24

How do I clean the LED Monitor?

...................................................................27

Specification ...................................................................................................28

LIMITED PRODUCT WARRANTY .................................................................29

Disclaimer, Trademarks, Icons & Copyright Information

FCC Compliance Statement

................................31

..........................................................................32

- 12 www.SCEPTRE.com

SCEPTRE E22 Display User Manual

IIdentifying Front and Rear Panel

Front View with Buttons

1.

2.

3.

4.

5.

– This button activates the On Screen Display (OSD). While the OSD is active, this button will act as the select button to open up an option for adjustment.

S

– With no OSD, this button this button will also increase the volume of the internal speaker. With the OSD turned on, this button moves the selection upwards.

T

– With no OSD, this button will also decrease the volume of the internal speaker. With the OSD turned on, this button moves the selection downwards.

– When the OSD is active, this button acts as the EXIT button and exits out of the option or OSD. This button switches between all the different inputs of the display.

– This button turns the display on or off.

- 14 www.SCEPTRE.com

SCEPTRE E22 Display User Manual

1.

HDMI 2 – HDMI stands for High Definition Multimedia Interface. This connection is for computers with HDMI video output.

2.

HDMI 1 – HDMI stands for High Definition Multimedia Interface. This connection is for computers with HDMI video output.

3.

VGA – VGA stands for Video Graphics Array. This connection is for computers to send video signals to the monitor by an analog signal. This method of connection is the most commonly used connection.

4.

AUDIO IN – This connection is for audio in from the computer going into the monitor.

- 15 www.SCEPTRE.com

SCEPTRE E22 Display User Manual

If You have HDMI Connection on Your Video Card…

1. Make sure the power of the E22 LED MONITOR is turned off.

2. Obtain a HDMI cable and connect one end to the back of the monitor and the other end to the back of the computer.

3. Turn on the power of both the E22 LED MONITOR and the computer.

Please Note: x

The PC’s clearest picture is ran with 1920 x1080 at 60 Hz.

- 16 www.SCEPTRE.com

SCEPTRE E22 Display User Manual

IIf You have VGA Connection on Your Video Card…

1.

2.

3.

4.

5.

Make sure the power of E22 LED MONITOR is turned off.

If you were previously using a CRT (bulky) monitor, please hook up your old monitor first and make sure your refresh rate is set to 60 Hz frequency before using the E22 LED

MONITOR. You can find the refresh rate information and change it by RIGHT CLICKING on the desktop with nothing selected. After you have right clicked, select the

PROPERTIES option. Click on the SETTINGS tab. Click on the ADVANCED button.

Click on the MONITOR tab. In that tab, change the refresh rate to 60 Hz and click on

APPLY. After the refresh rate changed, please shut down the computer and monitor.

Obtain the VGA cable and connect to the VGA connection on your PC. Connect the other end of the cable to your E22 LED MONITOR.

Obtain a 3.5mm mini-jack cable connect it between the computer’s audio out and the monitor’s audio in.

Turn on the power of both the E22 LED MONITOR and the PC.

Please Note: x

The PC’s clearest picture is ran with 1920 x1080 at 60 Hz.

- 17 www.SCEPTRE.com

SCEPTRE E22 Display User Manual

The OSD menu of the monitor provides various adjustments for the monitor such as color, brightness, and contrast …..etc.

When you press the button on the monitor, the OSD screen will appear. Select each of the functions with the

S or

T buttons. Use the button again to enter each of the function or when you’re in the function already, use the button to select the option you want to adjust. Use the

S or

T buttons to adjust each option’s values.

When you want to exit press the button.

- 18 www.SCEPTRE.com

SCEPTRE E22 Display User Manual

Quick Start offers users a variety of often adjusted options for users.

1.

BACKLIGHT -

This option adjusts the intensity of the LED diode directly.

2.

BRIGHTNESS

– This option adjusts the brightness of the monitor.

3.

CONTRAST

- This option adjusts the contrast of the monitor.

4.

PRESET

– This option lets the user select different preset display modes of the monitor.

Only USER mode will allow the user to adjust options freely.

a.

STANDARD

– This display mode is for regular users.

b.

USER

– This display mode allows you to adjust contrast and brightness manually.

c.

MOVIE

– This display mode is for playing movies.

d.

ECO

– This display mode is for power saving.

e.

FPS

– This display mode is for playing first person shooter games.

f.

RTS

– This display mode is for playing real time strategy games.

5.

ASPECT RATIO

– This option lets the user adjust the aspect ratio of the monitor.

a.

FULL

– This option automatically stretches any picture to the full screen regardless of picture proportion.

b.

4:3

– This option forces any resolution to a 4:3 square format.

6.

SOURCE

– This option lets the user manually switch an input or auto where the monitor detects a signal and changes the source automatically.

7.

BLUE LIGHT SHIFT

– This display mode filters out blue light for users who want blue light protection.

- 19 www.SCEPTRE.com

SCEPTRE E22 Display User Manual

1.

BACKLIGHT -

This option adjusts the intensity of the LED diode directly.

2.

BRIGHTNESS

– This option adjusts the brightness of the monitor.

3.

CONTRAST

- This option adjusts the contrast of the monitor.

4.

PRESET

– This option lets the user select different preset display modes of the monitor.

Only USER mode will allow the user to adjust options freely.

a.

STANDARD

– This display mode is for regular users.

b.

USER

– This display mode allows you to adjust contrast and brightness manually.

c.

MOVIE

– This display mode is for playing movies.

d.

ECO

– This display mode is for power saving.

e.

FPS

– This display mode is for playing first person shooter games.

f.

RTS

– This display mode is for playing real time strategy games.

5.

DCR

– This option turns on or off the dynamic contrast option of the monitor. Dynamic

Contrast automatically adjusts the contrast of the monitor based off the video signal provided.

6.

ASPECT RATIO

– This option lets the user adjust the aspect ratio of the monitor.

a.

FULL

– This option automatically stretches any picture to the full screen regardless of picture proportion.

b.

4:3

– This option forces any resolution to a 4:3 square format.

- 20 www.SCEPTRE.com

SCEPTRE E22 Display User Manual

7.

SHARPNESS

– This option adjusts the sharpness of graphics and text for this monitor.

8.

VGA Settings –

This setting allows users to adjust the image quality of the monitor.

a.

AUTO ADJUST – This option auto adjusts the picture for optimal performance while under VGA connection.

b.

AUTO COLOR – This option auto adjusts the color balance for the picture to maximize display performance while under VGA connection.

c.

H. POSITION – This option adjusts the horizontal position of the image.

d.

V. POISTION – This option adjusts the vertical position of the image.

e.

CLOCK – This option adjusts the picture clarity by large increments.

f.

PHASE – This option adjusts the picture clarity by small increments.

- 21 www.SCEPTRE.com

SCEPTRE E22 Display User Manual

1.

TEMPERATURE

– This option let users select different color temperatures of the monitor.

a.

NORMAL

– This color temperature is for users who prefer a neutral white balance.

b.

COOL

– This color temperature is for users who prefer a cool white balance.

c.

USER

– This color temperature is for users who would like to adjust the

RGB (red, green, blue) values manually.

i.

ADVANCE SETTINGS

– This setting adjusts finer values besides RGB going into cyan, magenta, and yellow.

d.

WARM

– This color temperature is for users who prefer a warm white balance.

2.

GAMMA

– This option adjusts the gamma curve value of the monitor.

3.

TINT

– This option adjusts the tint of the entire monitor.

4.

SATURATION

– This option adjusts the color saturation of the entire monitor.

5.

BLUE LIGHT SHIFT

– This display mode filters out blue light for users who want blue light protection.

- 22 www.SCEPTRE.com

SCEPTRE E22 Display User Manual

1.

OVERDRIVE

– This option increases the pixel response time of the LCD screen.

2.

SLEEP MODE

– With the monitor given no video signal, enabling this option will make the monitor automatically shut off after 30 minutes, 60 minutes, or 2 hours.

3.

LANGUAGE

– This option allows users to change the menu language of the monitor.

4.

OSD H POSITION

– This option adjusts the placement of the OSD menu horizontally.

5.

OSD TIMER

– This option adjusts the time it takes for the OSD menu to automatically shut off.

6.

OSD TRANSPARENCY

– This option adjusts the opacity of the OSD menu.

7.

VOLUME

– This option allows users to change the output level of the audio out port.

8.

RESET

– This option resets all values of the menu back to factory default.

- 23 www.SCEPTRE.com

SCEPTRE E22 Display User Manual

S

RESOLUTION & REFRESH RATE

1920 x 1080 @ 60Hz

1600 x 1200 @ 60Hz

1400 x 1050 @ 60Hz

1360 x 768 @ 60Hz

1280 x 720 @ 60Hz

1024 x 768 @ 60Hz

640 x 480 @ 60Hz

Supported HDMI Resolution

RESOLUTION & REFRESH RATE

1920 x 1080 @ 60Hz

1600 x 1200 @ 60Hz

1400 x 1050 @ 60Hz

1360 x 768 @ 60Hz

1280 x 720 @ 60Hz

1024 x 768 @ 60Hz

640 x 480 @ 60Hz

*Specifications are subject to change without notice.

- 24 www.SCEPTRE.com

SCEPTRE E22 Display User Manual

Problem

DISPLAY IS

UNCLEAR AND

UNSTABLE

THERE IS NO LED

DISPLAY or

SCREEN SAYS NO

SIGNAL

MONITOR SAYS

“SIGNAL OUT OF

RANGE”

I CAN’T OPEN THE

OSD

Possible solutions

To stabilize and clarify your display, use the AUTO ADJUST function or change the resolution to the display’s optimal setting 1920 x 1080 at 60Hz, then AUTO ADJUST.

Make sure you switched to the correct source. Check both sources to see video is on the other source. Check your video cable. It might be corrupt. Swap out the video cable for another one to see if the monitor will work. Check your power plug. See if it is fully plugged in on both the monitor and the wall.

If you have a CRT monitor, please connect the CRT monitor to the computer and change the refresh rate down to 60 Hz via your video card’s display settings menu. After the setting of

60 Hz has been change you can then use the LED on the computer.

1.

To change the setting go to display settings by right clicking on your desktop with nothing selected.

Choose the PROPERTIES option.

2.

Click on the SETTINGS tab, verify the resolution is

NOT higher than 1920 x 1080, and click on the

ADVANCED button.

3.

Click on the MONITOR tab and change the refresh rate to 60 Hz.

4.

Click on OK 2-3 times to finalize your change.

If you do NOT have a CRT monitor or it’s already broken, please make sure both the E22 LED monitor and your computer is turned off.

1.

Turn on the LED monitor and the computer.

2.

While the computer is turned on, press the “F8” key on your keyboard continuously until a selection menu appears and select the “Safe Mode” option.

3.

When you’ve entered Safe Mode please uninstall any video card driver and monitor driver by using either the “Add / Remove Programs” icon or going into

“System

4.

Properties” and manually removing anything under

“Monitors” and “Display Adapters”. After removing all the drivers, please reboot your computer and you should be able to see windows. Please install your monitor driver first, then your video card driver.

Please remember to make sure your refresh rate should be at 60Hz.

You need to have a valid video signal going through the monitor before you can turn on the OSD.

- 25 www.SCEPTRE.com

SCEPTRE E22 Display User Manual

Problem

I CANNOT GET THE

RESOLUTION

1920 x1080

Possible solutions

If you are using HDMI, please try out VGA to see if you are able to achieve that resolution. If your VGA can then, your video card’s HDMI cannot support widescreen resolutions.

Sometimes your video card will not read the monitor correctly and will not allow you to achieve the resolution you want. Rebooting your computer will solve the situation.

THE VIDEO IS TOO

BRIGHT NO MATTER

WHAT I ADJUST

THE WORDS AND

VIDEO ARE TOO

BLURRY

You can also make sure your video card’s video drivers are up to date. You can find what video card you have by clicking on START then RUN. Type in “DXDIAG”. When the diagnostic window pops up, click on the DISPLAY tab. The program will tell you what video chipset you have. Copy that name then search it with an online search engine like

GOOGLE™. Find your video card company’s web address and search for newer drivers. If updating your drivers does not work, you probably have one of the older video cards and cannot achieve a widescreen resolution. You’ll need to upgrade your video card to a newer one.

Sometimes having older video cards this type of problem might happen due to newer LEDs having to provide HD video capability and not being fully compatible with older video cards. You can try adjusting the contrast to a lower value and adjust the brightness to compensate.

Are you using the monitor’s native resolution? If not you’ll need to switch resolution to the native 1920 x 1080 at 60 Hz to make the words clearer.

THE COLORS ARE

NOT CORRECT

If the words are still blurry, please try enabling or disabling

CLEAR TYPE function from windows.

Sometimes the colors are not correct because your VGA or

HDMI cable is loose or corrupt. Please try reconnecting your cable or swap out your current cable to see if the problem persists.

HOW DO I RESET

THE MONITOR

Make sure there is a valid video signal to the monitor and press menu to open the OSD. Look for RESET under the

OTHER options.

I CHANGED MY

COLOR SETTINGS

NOW I CAN’T GET

THE FACTORY

DEFAULT BACK.

Open the OSD, under OTHER, select RESET to reset all values back to factory default.

- 26 www.SCEPTRE.com

SCEPTRE E22 Display User Manual

Problem

THE WORDS ARE

TOO SMALL AT

1920 x1080

Possible solutions

At the native resolution of 1920 x1080, some people might feel that the words are too small to read. You can change the size of the words in Windows Operating System via its display properties.

For Windows XP

1.

Right click on the background with nothing selected. Left click on the PROPERTIES option.

2.

Click on the SETTINGS tab.

3.

Under SETTINGS, click on the ADVANCED button.

4.

Under GENERAL tab, change the size of the words by selecting the option NORMAL SIZE and change it to LARGE SIZE.

5.

Click on OK on all windows to exit.

6.

Once you have finished rebooting, the computer is ready for use.

For Windows VISTA or Windows 8 or Windows 10

1.

Right click on the Wallpaper. Left click on the

PERSONALIZE option.

2.

Click on ADJUST FONT SIZE (DPI) option on the left column and

3.

Click on CONTINUE.

4.

In there you can change the size of the words by changing from the option DEFAULT SCALE to

LARGE SCALE.

5.

Click on APPLY to finalize your selection.

6.

Once you have finished rebooting, the computer is ready for use.

- 27 www.SCEPTRE.com

SCEPTRE E22 Display User Manual

IMPORTANT

1.

The power cable has to be removed from the socket before cleaning the display.

2.

Do not use volatile solvent (alcohol, rosin, and toluene) to clean the display. These types of chemicals might damage the housing and the LCD glass.

Cleaning the bezel

1.

Use a 100% cotton cloth or micro-fiber cloth for cleaning.

2.

If the bezel is dirty to the point where you cannot simply dry wipe it, please lightly dampen the wiping material with clean water and wipe again. Wipe the display with a dry micro-fiber cloth or 100% cotton cloth afterwards.

Please Note: x

Make sure you wring the water out of the cloth before cleaning the bezel in order to prevent water from penetrating into the electronics.

Cleaning the Screen

1.

Use a 100% cotton cloth or micro-fiber cloth for cleaning.

2.

The LCD screen glass is extremely fragile. Do not scrape it with any material. Do not press or tap the screen to avoid cracking. When the screen is dirty to the point where you cannot simply dry wipe it, please lightly dampen the wiping material with clean water and wipe again. Wipe the display with a dry micro-fiber cloth or

100% cotton cloth afterwards.

- 28 www.SCEPTRE.com

SCEPTRE E22 Display User Manual

Active Area / Screen Size

Aspect Ratio

Display panel

22” (diagonal 21.53“)

Widescreen 16 : 9

Brightness

Dynamic Contrast

Response Time

Refresh Rate

Viewing Angle

Colors

LED Backlight

Dimension

Weight

Wall Mount Pattern

200 cd/m

2

1,000,000:1

1ms (G-to-G)

60 Hz

Typical 170/160 Degree

(Horizontal/Vertical)

16.7 million of colors

30,000 hours

Monitor Display

With Stand: 20.47” x 15.16” x 6.61”

Without Stand: 20.47” x 12.0” x 1.86”

6.69 lb (with stand), 5.92 lb (without stand)

75mm x 75mm Screw Size M4 x 10mm

Power input

Tilt

On Screen Display Control (OSD)

OSD Language

Preset Picture Mode

Preset Game Mode

Blue Light Shift

I/O

Compliance

Input: 100 – 240V~ 50/60Hz, 1.1A Max

Backward:15° Forward: 5°

Features

QuickStart, Picture, Color, System

English (Default), French, Spanish, Chinese

Standard, User, Movie, Eco

RTS, FPS

Available

VGA, HDMI (HDCP supported)

FCC, cETLus, ISTA 6, HDMI, WHQL (Win

10), Energy Star

*Specifications are subject to change without notice.

- 29 www.SCEPTRE.com

SCEPTRE E22 Display User Manual

Please read this warranty card carefully, it is a “ONE-YEAR LIMITED WARRANTY” on parts and labor (90 days for commercial use) and is only valid when purchased from an Authorized

Reseller, only on new and non-refurbished product, and available to customers in the

Continental US, Alaska, Hawaii and Puerto Rico. See below for the SCEPTRE Extended

Service warranty.

SCEPTRE’s Responsibility

SCEPTRE units purchased from an authorized SCEPTRE U.S. Reseller in the United States and that are used in the fifty (50) United States or Puerto Rico and Canada are warranted to be free from manufacturing defects in materials and workmanship for a period of one (1) year from the date of their original retail purchase (or a period of ninety (90) days for commercial use). If the unit fails to conform to this warranty, we will service the units using new or refurbished parts. In the event that the part required for replacement is no longer in production and/or is obsolete, SCEPTRE will repair or replace the unit with similar or like parts of equal value. If a similar or like part is not available, a charge may be incurred to the owner, for any upgraded parts substituted.

Service Labor

During a period of one (1) year from the effective warranty date (or a period of ninety (90) days for commercial use), SCEPTRE will provide, when needed, service labor to repair a manufacturing defect at its designated Service Center. To obtain warranty service in the

United States, you must first call our Customer Support at (800) 788-2878. The determination of service will be made by SCEPTRE Customer Support. PLEASE DO NOT RETURN YOUR

UNIT TO SCEPTRE WITHOUT PRIOR AUTHORIZATION.

Parts

New or remanufactured parts will be used for repairs by SCEPTRE at its designated Service

Center for one (1) year (or ninety (90) days for commercial use) from the effective warranty date. Such replacement parts are warranted for the remaining portion of the original warranty period.

Service

During the one (1) year (or ninety (90) days for commercial use) warranty period, SCEPTRE will, at its option and sole discretion, repair or replace defective parts, including replacement of the entire Panel. The Customer will be required to ship the unit to the Service Center indicated at the time Customer Support is contacted to make the necessary repairs, you are responsible for all transportation charges to the service facility. SCEPTRE is not responsible for the de-installation or re-installation of the unit.

Packaging and Shipping Instruction

When you send the product to an authorized SCEPTRE service facility you must use the original carton box and packing material or an equivalent as designated by SCEPTRE. If you no longer have them please contact Sceptre’s Customer Support.

Not Covered

This warranty does not cover the following: cosmetic defects; damage, malfunctions, or failures resulting from shipping or transit accidents, abuse, misuse, operation contrary to furnished instructions, operation on incorrect power supplies, operation with faulty associated equipment, modification, alteration, improper servicing, tampering and or, damage from fire, water, lightning, power surges, abnormal environmental conditions, or other acts of nature; normal wear and tear (SCEPTRE reserves the right to determine “wear and tear” on any and all products); unsatisfactory visual or audio performance not caused by a manufacturing defect; or displays on which the serial number has been removed or defaced. Image Sticking caused by operating at excessive brightness levels for extended periods or mishandling are

- 30 www.SCEPTRE.com

SCEPTRE E22 Display User Manual

not covered by this warranty. Installation, removal, transportation and reinstallation of a display and routine maintenance and cleaning, are not covered by this warranty. Any hardware, components, and/or software bundled with the display are not covered by this warranty. Any damages caused directly or indirectly by Buyer’s or Reseller’s “Value Added

Feature” are not covered by this warranty or Sceptre, Inc. Any damages of any kind including, but not limited to, direct or indirect damages, lost profits, lost savings, or other special incidental, exemplary or consequential damages whether for breach of contract, tort, or otherwise, or whether arising out of the use of or inability to use the product, even if

SCEPTRE, INC. or any dealer, distributor of authorized service provider/partner has been advised of the possibility of such damages, or any claim by any other warranty are not covered by this warranty or Sceptre Inc.

ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED

IN DURATION TO THE PERIOD OF TIME SET FORTH ABOVE. OUR LIABILITY FOR ANY

AND ALL LOSSES AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER,

INCLUDING OUR NEGLIGENCE, ALLEGED DAMAGE OR DEFECTIVE GOODS,

WHETHER SUCH DEFECTS ARE DISCOVERABLE OR LATENT, SHALL IN NO EVENT

EXCEED THE PURCHASE PRICE OF THE DISPLAY. WE SHALL NOT BE RESPONSIBLE

FOR LOSS OF USE, COMMERCIAL LOSS OR OTHER INCIDENTAL OR

CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW

LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF

INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR

EXCLUSIONS MAY NOT APPLY TO YOU. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. This is the only warranty applicable; no one is authorized to extend or modify it or to grant any other warranty.

SCEPTRE retains the right to assess all warranty claims and to determine if damages are covered by the warranty. In case of a claim that is not covered by the warranty, you will be contacted to determine whether SCEPTRE should repair the damage for a fee or whether the product should be returned to you as received by the repair center.

Dead Pixel Policy

SCEPTRE sets limit on the LCD at 3 dead pixels in a cluster adjacent to each other, or 5 dead pixels in a combination of color and brightness. Any number of dead or bad pixels under the limit is considered to be within normal performance specification of the LCD and is not considered defective.

Owner’s Responsibility

Effective Warranty Date

Warranty begins on the date of sale to the end user. To ensure warranty service, keep the dated bill or sale receipt as evidence of the purchase date. If you can no longer obtain your receipt, the warranty will revert to the unit’s manufacture date according to the serial number of the unit. This limited warranty applies only to the original purchaser and is non-transferable.

Warranty Service

For warranty service information, contact SCEPTRE Technical Support at email address [email protected]

, via phone at (800) 788-2878, or via World Wide Web chatting service at www.Sceptre.com. SCEPTRE Technical Support is available Monday to

Friday 8:30 AM to 5:30 PM Pacific Time. Parts and service labor that are SCEPTRE’s responsibility (see above) will be provided without charge. Other services or services not covered by the warranty are at the owner’s expense. You must provide the model, serial number and date of purchase. Before you ask for warranty service, read your User Manual.

You might avoid a service call.

Warranty conditions are subject to change, for latest Warranty Terms and Conditions and additional information regarding your warranty, please see complete details online at www.SCEPTRE.com

.

- 31 www.SCEPTRE.com

SCEPTRE E22 Display User Manual

Disclaimer, Trademarks, Icons &

Copyright Information

x

“HDMI, the HDMI logo and High-Definition

Multimedia Interface are trademarks or registered trademarks of HDMI

Licensing LLC.” x

Microsoft, Windows are registered trademarks of Microsoft Corporation in the United States and other countries.

x

This Display meets the ENERGY STAR® guidelines under

the default picture settings. Changing this setting or

enabling other options will increase power consumption

which could possibly exceed the guidelines of ENERGY

STAR®.

For more information on the ENERGY STAR program, please refer to www.energystar.gov

.

x

SCEPTRE is a trademark or registered trademark of Sceptre Group.

x

Sceptre, Inc. shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.

x

In the interest of continuing product improvement, Sceptre, Inc. reserves the right to change product specifications without notice. Information in this document may change without notice.

x

No part of this document may be copied, reproduced, or transmitted by any means, for any purpose without prior written permission from

Sceptre, Inc.

- 32 www.SCEPTRE.com

SCEPTRE E22 Display User Manual

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Please Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: x x x

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and the receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Caution: To comply with the limits for an FCC Class B computing device, always use the signal cord and power cord supplied with this unit.

The Federal communications Commission warns that changes or modifications to the unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

European Notice

Products with the CE marking comply with both the EMC Directive (89/336/EEC), (93/68/EEC) and the Low Voltage Directive (72/23/EEC) issued by the Commission of the European Community.

- 33 www.SCEPTRE.com

SCEPTRE E22 Display User Manual