CC-118

Micro Clamp

INSTRUCTIONS

Introduction

Thank you for choosing Impact.

The Impact CC-118 Micro Clamp features a baby (5/8 inch) receiver for mounting an item with a baby pin. Often used for attaching a lighting fixture to an overhead pipe or a vertical riser, this clamp is also suitable for many other uses in the studio and on location.

Recommended Accessory

• Impact CA-100 Double End Spigot with 1/4 ″-20 and 3/8″ Male Threads

Visit our website at www.ImpactStudioLighting.com for more Impact accessories.

Specifications

Maximum clamp tube size: 1.2 in. (30 mm)

Receiver size: 5/8 in.

Maximum load capacity: 5 lb.

Warnings

⚠

• Please read and follow these instructions, and keep this manual in a safe place.

• Handle the unit with care.

• Clean the unit with a soft, dry cloth.

• Keep this unit away from children.

• Make sure everything is secure before proceeding.

• Make sure the item is intact and that there are no missing parts.

• Do not exceed the maximum load capacity.

• Use caution when mounting anything at the maximum load capacity.

• All photos are for illustrative purposes only.

One-Year Limited Warranty

This IMPACT product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.

The warranty provider’s responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at the provider’s discretion, of any product that fails during normal use of this product in its intended manner and in its intended environment.

Inoperability of the product or part(s) shall be determined by the warranty provider. If the product has been discontinued, the warranty provider reserves the right to replace it with a model of equivalent quality and function.

This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED HEREIN,

THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY

IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you with specific legal rights, and you may also have additional rights that vary from state to state.

To obtain warranty coverage, contact the Impact Customer Service Department to obtain a return merchandise authorization (“RMA”) number, and return the defective product to

Impact along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense.

For more information or to arrange service, visit www.impactstudiolighting.com or call

Customer Service at 212-594-2353.

Product warranty provided by the Gradus Group.

www.gradusgroup.com

IMPACT is a registered trademark of the Gradus Group.

© 2015 Gradus Group LLC. All Rights Reserved.

GG2