D-Link | DWL-G710 - AirPlus G Wireless Range Extender | Specifications | D-Link DWL-G710 - AirPlus G Wireless Range Extender Specifications

D-Link DWL-G710 - AirPlus G Wireless Range Extender Specifications
This product can be set up using
anyy curr
entt web br
owser,, i.e
Internet Explorer 6 or Netscape
Navigator 6.2.3.
D-Link AirPlus™ G
Wireless Range Extender
ou Begin
oree YYou
It’s best to use a computer (with an Ethernet adapter) that is connected to a switch for
configuring the DWL-G710. The default IP address for the DWL-G710 is with
a Subnet Mask of You will need to assign your computer a Static IP
address within the same range as the DWL-G710’s IP address for the purpose of configuring
the DWL-G710. See the Manual on the CD-ROM if you need assistance in assigning a
Static IP address for your network adapter.
eck YYour
agee Con
our PPack
DWL-G710 Wireless Range Extender
CD-ROM with Manual
Ethernet (CAT5e UTP/Straight-Through) Cable
5V 2A DC Power Adapter
Using a power supply
with a different voltage
rating will damage and void the
warranty of this product.
If any of the above items are missing, please contact your reseller.
©2004 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders.
Software and specifications subject to change without notice. DWL-G710.09132004
Connecting The DWL-G710 Wireless
ge Exten
der TTo
o YYour
our N
A. Connect the power adapter to the receptor on the rear panel of the DWL-G710 and
then plug the other end of the power adapter to a wall outlet or power strip. The
Power LED will turn ON to indicate proper operation.
B. Using a Ethernet cable, insert one end of the cable to the LAN port on the rear panel
of the DWL-G710 and the other end of the cable to a switch. Note: You also have the
option of connecting the DWL-G710 directly to the computer that will be used for
configuration. The Link LED light will illuminate to indicate a proper Ethernet connection.
C. Computers with 802.11g wireless adapters such as the DWL-G630 AirPlus™ G
Wireless Cardbus Adapter and the DWL-G510 AirPlus™ G Wireless PCI Adapter can
connect to the DWL-G710.
C. Antenna
Used to wirelessly connect
to 802.11g networks.
B. LAN Port
This is the connection for
Ethernet cables to your
Ethernet-enabled device.
A. Receptor for
Power Adapter
Reset Button
Using The Setup Wizard
Open your Web
browser and type
into the URL address
box. Then press the
Enter or Return key.
The logon pop-up screen
will appear.
Type admin for the
username and leave the
password field blank.
Click OK
Once you have logged in, the
Home screen will appear.
Click Run Wizard
Using The Setup Wizard (continued)
You will see the
following screens.
Click Next
Set up your new password.
You have the option to establish
a password.
Click Next
Set Wireless LAN Connection
By default the DWL-G710 SSID
is set to default with a Channel
setting of 6. Site Survey will
display existing devices on your
wireless network.
Click Site Survey
Using The Setup Wizard (continued)
Site Survey
The Site Survey will display the
available SSID’s on your wireless
Click the radio button next to
the SSID of the wireless network
whose signal you wish to repeat.
Click Connect
Set Wireless LAN Connection
The SSID and Channel should now
be set to the same settings as the
SSID that you selected.
Click Next
The DWL-G710 is capable of two
levels of wireless encryption 64-bit
and 128-bit. By default encryption
is disabled. You can change the
encryption settings to enable more
secure wireless communication.
Keys may be entered in HEX (0-9,
A-F) or ASCII format. Select the key
type and size you wish to use and
enter the key in the field provided.
Click Next
Using The Setup Wizard (continued)
Click Restart
You will be returned to the Home tab. Please close all Internet browser windows.
Your Setup is Complete!
When you have completed the steps in this Quick Installation Guide, your connected
network should look similar to this:
Connecting to the DWL-G710
Using the AirPlus™ G Wireless
Utillity included with the
AirPlus™ G adapters, you can
browse and connect to the
The MAC address of the DWL-G710 is listed on the product sticker on the bottom
of the unit. You should see more than one available device using the same SSID.
Select the DWL-G710 by selecting the MAC address from the bottom of the unit.
The Link Info page of the
AirPlus™ G utility will show the
connection status between the
DWL-G710 and AirPlus™ G
wireless adapter.
cal Support
You can find software updates and user documentation on the D-Link website.
D-Link provides free technical support for customers within the United States and
within Canada for the duration of the warranty period on this product.
U.S. and Canadian customers can contact D-Link technical support through our
website, or by phone.
Tech Support for customers within the United States:
D-Link Technical Support over the Telephone:
(877) 453-5465
24 hours a day, seven days a week.
D-Link Technical Support over the Internet:
Tech Support for customers within Canada:
D-Link Technical Support over the Telephone:
(800) 361-5265
Monday to Friday, 7:30am to 12:00am EST
D-Link Technical Support over the Internet:
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF