Ryvyr | CUM198RWT | Installation guide | RYVYR CUM198RWT Installation Guide

INSTALLATION INSTRUCTIONS
UNDERMOUNT SINK
All Models
CUM-XXXX
BEFORE YOU BEGIN
•
•
•
•
Observe all local plumbing and building codes.
Follow these instructions only if it applies to your installation.
Before installation, carefully inspect it for damage. Return the vanity top to its packaging until you are ready to install it.
These instructions contain important care and cleaning instructions. Please review these instructions carefully.
SUGGESTED TOOLS AND MATERIALS
Phillips Screwdriver
Silicon Sealant
Tape Measure
Safety Glasses
4x
4x
500001
111214
111213
120003
PARTS / HARDWARE INCLUDED
4x
4x
SINK INSTALLATION
CAUTION! Risk of product damage. Do not use plumbers putty or oil-based sealers with
this vanity top. These products will stain surfaces permanently.
1
2
Apply a continuous bead of quality sealant to the
surface (rim) of the sink.
Turn the vanity upside down and place it on a clean,
scratch-resistant surface. Center the sink over the cutout.
3
Secure the sink to the top using the mounting kit / hardware provided.
**NOTE: Sink style, shape, and cutout on top may vary from the picture above. Instructional purposes only.
08.2014
For customer support please visit www.ryvyr.com or call 866.395.8112 weekdays 8:00 to 5:00 EST or fax 866.395.8113 any time
CARE AND CLEANING
• Never use a strong / abrasive cleaner. Always test your cleaning solution on an unnoticeable area before applying it to the
entire surface.
• Wipe surfaces clean, immediately after applying cleaner.
• Do not allow the cleaner to sit or soak. Never let cleaners sit on the surface of the lavatory.
• Use a soft, dampened sponge or cloth. Never use an abrasive material such as a brush or scouring pad to clean surfaces.
They will scratch the lavatory surface.
• Always rinse and wipe clean the fixtures to prevent soap buildup.
08.2014
For customer support please visit www.ryvyr.com or call 866.395.8112 weekdays 8:00 to 5:00 EST or fax 866.395.8113 any time
Download PDF