- Howard Electronic Instruments
www.jbctools.com
English
2
Español
16
Deutsch
30
中文
44
Page
2 Tools Control Unit
Ref. DDE-B
www.jbctools.com
Packing List
The following items should be included:
- 2 Tools Control Unit .............................. 1
unit
Ref. DDE-1B (120V)
. DDE-2B
(230V)
. DDE9B (100V)
- 1.5m Power Cord ................................... 1
unit
Ref. 0010569 (230V)
. 0013671 (100/120V)
- Manual .......................................................
1 unit
Ref. 0016160
Features
www.jbctools.com
Connections
www.jbctools.com
Work simultaneously with up to 2 tools and
1 module + 1 pedal for each tool
(Peripherals).
USB-A
connector
2,8” Color
TFT screen
DDE Control Unit
Equipotential
connection
Tilt the display for
easy reading
USB-B
connector
Stand cable
Ref. 0011283
Power Socket
RJ12 connector
for Robot system
To Pedal
Tool
Ref. P-005
2
3
Module cable
Ref. 0012709
Stands & Tools
For a basic working system you need: 1 Stand, 1 Tool and 1 Cartridge or tip.
Stand
Peripherals
To another peripheral
www.jbctools.com
Stands
Ref. AD-SD
Ref. DN-SD
Ref. AP-SD
Tools Precision General HD General Nitrogen Solder Feed Iron purposes purposes purposes Handle Ref. AP130
Ref. T245-NA*
Handle
Handle
Handle
Ref. T210 Ref. T245 Ref. T470
Ref. PA-SD
Ref. HT-SD
Ref. DS-SD
Ref. DR-SD
* The MNE
Nitrogen Flow
Regulator is
required to work.
Cartridges
C210
C245
C130
Micro Tweezers
Thermal Tweezers
Micro Desoldering Iron
Desoldering Iron
Ref. PA120
Ref. HT420
Ref. DS360
Ref. DR560
www.jbctools.com
C120
4
C420
C360
C560
5
Peripherals
By pressing Peripherals in the main MENU, you can join tool ports with peripherals
which means each tool can work with 1 module and 1 pedal at the same time.
Control
Unit
Electric
Pneumatic
Stickstoff-Mess-
Fume Extractor
www.jbctools.com
Desoldering
Module
Ref. MSE-A
Desoldering
Module
und Regelsystem
Ref. MNE-A
Switch
Ref. FSE-A
Pedal
Ref. P-005
T470
C245
DN-SD
T245-NA*
C245
AP-SD
AP130-A
C130
PA-SD
PA120
C120
HT-SD
HT420
C420
DS-SD
DS360
C360
DR-SD
DR560
C560
* The MNE Nitrogen Flow Regulator is required.
**If you need to connect the MS, MV, MN or FS modules, an adapter is required (Ref. IM2496).
Ref. MVE-A
Function: Enable/disable the module or make any tool enter Sleep or Hibernation modes.
This pedal will work with any module or tool regardless of the module to which it is connected.
If you do not have a module, you can link up the P-305 Pedal Kit to the tool port.
Compatibility
P-305 Pedal Kit
Connection Box
Ref. 0012527
+
Pedal
Ref. P-005
By using the Connection Box, the P-005
Pedal will work with only the tool port to
which it is connected.
Select the equipment that best suit your soldering or desoldering needs.
Function:
Makes the tool enter/skip from Sleep mode.
6
Tool port
connection
7
Basic
system
Control
Unit
Stand
DDE
AD-SD
working
Peripherals**
Tool
Cartridge
Range
T210
C210
T245
C245
MSE /
MVE
MNE
FSE
P-005
www.jbctools.com
Operation
T245
T245
T245
350
The JBC Exclusive Heating System 1. Work
2 . Sleep
Actual Temp. 25ºC
Tool in the stand
Selected 350ºC
Power
45%
Hibernation
Sleep
ºC
Port 2
Actual Temp. 180ºC
Delay to hibernation: 29:30
Port 2
Port
2
Tools Menu:
Tools Menu:
Tools Menu:
· Set temperature limits
· Select temperature levels
· Set Sleep temperature
· Set Sleep delay
(from 0 to 9 min or no Sleep)
· Set Hibernation delay
(from 0 to 60 min or no
hibernation)
8
3. Hibernation
Work Screen
The DDE offers an intuitive user interface which provides quick access to station parameters.
Long time in
the stand
Our revolutionary technology is able to recover tip temperature extremely quickly. It means the user
can work at a lower temperature and improve the quality of soldering. The tip temperature is further
reduced thanks to the Sleep and Hibernation modes which increase the tip life by 5.
When the tool is lifted from the
stand the tip will heat up to the
selected temperature.
17:14
When the tool is in the stand,
the temperature falls to
180ºC / 360ºF (preset sleep
temperature).
17:14
After longer periods of
inactivity (pre-set to 30 min.),
the power is cut off and the
tool cools down to room
temperature.
17:14
www.jbctools.com
Station is controlled by a PC.
Station is controlled by a robot.
Station
Tools
Counters
Station software update.
Press INFO to start the process.
Warning.
Press INFO for failure description.
Error. Press INFO for failure description,
Peripherals Graphics
error and how to proceed.
Reset the type of
9
port
Process analysis
Soldering Net
Remotely manage and monitor as many stations as your PC can handle.
JBC
Manager
software
USB Hub
any JBC
station
1. Download the JBC Manager software and the user manual from www.jbctools.com/manager.html
2. Connect the stations via USB-B connector and the PC will automatically detect them.
3. The notification
will be displayed on the station.
Functions:
- Set all the station parameters from your PC.
- Organize groups of stations and set all their parameters at the same time.
- Store specific configurations for later uses.
- Analyze the soldering graphics of the stations on your PC and export them.
10
11
Working with Robots
Maintenance
Manage and monitor the station using a Robotic system.
Before carrying out maintenance or storage, always allow the equipment to cool.
1. Connect the tool to the station port by means of the Converter.
- Clean the station screen with a glass cleaner
Clean periodically
or a damp cloth.
- Use a damp cloth to clean the casing and
the tool. Alcohol can only be used to clean
the metal parts.
website www.jbctools.com/jbcsoftware-menu-115.html
.
Robot
- Periodically check that the metal parts of
the tool and stand are clean so that the
station can detect the tool status.
Converter
Ref. 0002747
- Maintain tip surface clean and tinned prior
to storage in order to avoid tip oxidation.
Rusty and dirty surfaces reduce heat
transfer to the solder joint.
Control
Unit
- Periodically check all cables and tubes.
- Replace a blown fuse as follows:
RS-232
connection
Fuse
The icon
is diplayed while updating.
Fuse holder
Fuse holder
2.
Connect your Robot system to the Robot connector (RJ12) of the station.
available only if necessary (Ref: 0013772).
JBC
Update File
DB9-RJ12 Adapater
3.
Enable the Robot option in the station settings and the notification will be displayed:
4.
Set your Robot’s commands according to the Robot Communication Protocol, available on the
Update the station software
1. Download the JBC Update File from
2. Insert the USB flash drive to the station.
www.jbctools.com/software.html and save it on a USB flash drive. Preferably one with no other
files.
1. Pull off the fuse holder and remove the
2. Press the new fuse into the fuse holder fuse. If necessary use a tool to lever it off.
and replace it in the station.
- Replace any defective or damaged pieces. Use original JBC spare parts only.
- Repairs should only be performed by a JBC authorized technical service.
12
13
DDE-1B 120V 50/60Hz. Input fuse: 4A. Output: 23.5V
DDE-2B 230V 50/60Hz. Input fuse: 2A. Output: 23.5V
DDE-9B 100V 50/60Hz. Input fuse: 5A. Output: 23.5V
-
It is imperative to follow safety guidelines to prevent electric
shock, injury, fire or explosion.
Safety
Weight: 4.3 Kg (9.3 lb)
Dimensions: 148 x 120 x 232 mm
Output Peak Power: 150W per tool
Temperature Range: 90-450 °C (90-840 ºF)
Idle Temp. Stability (still air) ±1.5 ºC (±3 ºF)
Tip to ground resistance: <2 ohms
Tip to ground voltage: <2mV RMS
Ambient Operating Temperature: 10-40 ºC (50-104 ºF)
USB-A / USB-B / Peripherals connectors- RJ12 connector for Robot
Complies with CE standards
ESD protected housing “skin effect”
Specifications
- Do not use the units for any purpose other than soldering or rework. Incorrect use may cause fire.
- The power cord must be plugged into approved bases. Be sure that it is properly grounded before use. When unplugging it, hold the plug, not the wire.
- Do not work on electrically live parts.
- The tool should be placed in the stand when not in use in order to activate the sleep mode. The soldering tip, the metal part of the tool and the stand may still be hot even when the station is turned off. Handle with
care, including when adjusting the stand position.
- Do not leave the appliance unattended when it is on.
- Do not cover the ventilation grills. Heat can cause inflamable products to ignite.
-
Use a “non residue” classified flux and avoid contact with skin or eyes to prevent irritation.
-
Be careful with the fumes produced when soldering.
Keep your workplace clean and tidy. Wear appropriate protective glasses and gloves when working to avoid
personal harm.
-
Utmost care must be taken with liquid tin waste which can cause burns.
This appliance can be used by children over the age of eight and also persons with reduced physical, sensory
or mental capabilities or lack of experience provided that they have been given adequate supervision or instruction
concerning use of the appliance and understand the hazards involved. Children must not play with the appliance.
-
14
Maintenance must not be carried out by children unless supervised.
15
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement