advertisement
Unpacking
Thank you for buying the MSI
®
X99S XPOWER GAMING TITANIUM/USB3.0
motherboard. Check to make sure your motherboard box contains the following items.
If something is missing, contact your dealer as soon as possible.
Drivers & Utilities
Disc
Motherboard User
Guide
Motherboard
SATA Cable x10
Quick Guide
I/O Shield
Case Badge
SATA Cable Labels
RGB LED Extension Cable 40cm x1
RGB LED Extension Cable 80cm x1
Antenna x2
V-Check Cable x6
Door Hanger
SLI Bridge 102mm Cable (short) x2
SLI Bridge 140mm Cable (long) x2
Unpacking
1
Safety Information
y
The components included in this package are prone to damage from electrostatic discharge (ESD). Please adhere to the following instructions to ensure successful computer assembly. y
Ensure that all components are securely connected. Loose connections may cause the computer to not recognize a component or fail to start. y
Hold the motherboard by the edges to avoid touching sensitive components. y
It is recommended to wear an electrostatic discharge (ESD) wrist strap when handling the motherboard to prevent electrostatic damage. If an ESD wrist strap is not available, discharge yourself of static electricity by touching another metal object before handling the motherboard. y
Store the motherboard in an electrostatic shielding container or on an anti-static pad whenever the motherboard is not installed. y
Before turning on the computer, ensure that there are no loose screws or metal components on the motherboard or anywhere within the computer case.
y
Do not boot the computer before installation is completed. This could cause permanent damage to the components as well as injury to the user. y
If you need help during any installation step, please consult a certified computer technician.
y
Always turn off the power supply and unplug the power cord from the power outlet before installing or removing any computer component.
y
Keep this user guide for future reference.
y
Keep this motherboard away from humidity.
y
Make sure that your electrical outlet provides the same voltage as is indicated on the PSU, before connecting the PSU to the electrical outlet.
y
Place the power cord such a way that people can not step on it. Do not place anything over the power cord.
y
All cautions and warnings on the motherboard should be noted.
y
If any of the following situations arises, get the motherboard checked by service personnel:
Liquid has penetrated into the computer.
The motherboard has been exposed to moisture.
The motherboard does not work well or you can not get it work according to user guide.
The motherboard has been dropped and damaged.
The motherboard has obvious sign of breakage.
y
Do not leave this motherboard in an environment above 60 °C (140°F), it may damage the motherboard.
2
Safety Information
Quick Start
Preparing Tools and Components
Intel
®
LGA 2011-3 CPU
CPU Fan
Thermal Paste
DDR4 Memory
Chassis
Power Supply Unit
SATA DVD Drive
SATA Hard Disk Drive Graphics Card
Phillips Screwdriver
A Package of Screws
Quick Start
3
Installing a Processor
3
1
2
https://youtu.be/QnwHWBx3NnE
4
4
Quick Start
5
9
10
8
6
7
11
13
12
Installing DDR4 memory
http://youtu.be/T03aDrJPyQs
2
1
2
3
Quick Start
5
Connecting the Front Panel Header
http://youtu.be/DPELIdVNZUI
SW
RESET
POWER SW
HDD LED
POWER LED+
POWER LED-
2
1
JFP1
9
10
5
7
1
3
9
HDD LED +
HDD LED -
Reset Switch
Reset Switch
Reserved
6
8
2
4
10
Power LED +
Power LED -
Power Switch
Power Switch
No Pin
HDD LED
POWER LED
HDD LED -
HDD LED +
POWER LED -
POWER LED +
JFP1
6
Quick Start
Installing the Motherboard
1
2
Quick Start
7
Installing SATA Drives
http://youtu.be/RZsMpqxythc
2
1
3
5
4
8
Quick Start
Installing a Graphics Card
http://youtu.be/mG0GZpr9w_A
1
5
3
2
4
Quick Start
9
Connecting Peripheral Devices
10
Quick Start
Connecting the Power Connectors
http://youtu.be/gkDYyR_83I4
JPWR2
JPWR1
JPWR4
JPWR3
Quick Start
11
Power On
2
3
4
1
12
Quick Start
Contents
SLOW_1, JSLOW_1: Slow Mode Booting Switch/ Jumper ................................... 43
Contents
13
CPUFAN1,SYSFAN1~3, OPTFAN1~2, PUMPFAN1: Fan Connectors .................... 48
JBAT1: Clear CMOS (Reset BIOS) Jumper ........................................................... 52
FLASHB1: BIOS FLASHBACK+ Button ................................................................. 53
POWER1, RESET1: Power Button, Reset Button ................................................. 53
SW-TACT1~2, BLKOC_SEL1: Plus, Minus Button, BCLK-Ratio Switch .............. 53
OC_RT1, OC_FS1 : OC Retry Button, OC Force Enter BIOS Button ..................... 54
7/ 8.1/ 10.............................................................................. 86
14
Contents
Turbo Boost Max Technology 3.0 Application / Driver ............................ 118
Rapid Storage Technology Option ROM ......................................... 120
Contents
15
Specifications
CPU
Chipset
Memory
Expansion Slots
Multi-GPU
Storage
16
Specifications
y
Supports New Intel
®
Core™ i7 Processor Extreme Edition for LGA2011-3 Socket y
Supports Intel
®
Turbo Boost Max Technology 3.0*
* This function will be supported depend on the CPU.
Intel
®
X99 Chipset y
8x DDR4 memory slots, support up to 128GB*
Supports DDR4 3466(OC) /3400(OC)/ 3333(OC)/ 3200(OC)/
3000(OC)/ 2933(OC)/ 2800(OC) / 2666(OC)/ 2600(OC)/
2400/ 2200(OC)/ 2133 MHz y
Quad channel memory architecture y
Supports non-ECC, un-buffered memory y
Supports Intel
®
Extreme Memory Profile (XMP) y
Supports RDIMM 1Rx8 memory module (Operates in non-
ECC mode)
* For the latest information about memory, please visit http://www.msi.com
y
5x PCIe 3.0 x16 slots (PCI_E1~PCI_E4 & PCI_E6*), support up to 4-way mode.
1-way mode: x16/x0/x0/x0/x0
2-way mode: x16/x0/x0/x16/x0**, x16/x0/x0/x8/x0***
3-way mode: x16/x0/x0/x16/x8** x8/x8/x0/x8/x0***
4-way mode: x8/x8/x0/x16/x8**, x8/x8/x0/x8/x4*** y
1x PCIe 2.0 x1 slot (PCI_E5)
** For the CPU that supports 40 PCIe lanes
*** For the CPU that supports 28 PCIe lanes y
Supports 4-Way AMD
®
CrossFire™ Technology y
Supports 4-Way NVIDIA
®
SLI™ Technology
Intel
®
X99 Chipset y
10x SATA 6Gb/s ports (2 ports from SATAe port) y
1x M.2 slot (Key M)
Supports up to PCIe 3.0 x4 and SATA 6Gb/s
Supports 2242/ 2260 /2280/ 22110 storage devices y
1x U.2 port*
Supports PCIe 3.0 x4 NVMe storage y
1x SATAe port (compatible with 2 SATA ports)**
Supports up to PCIe 2.0x2
y
Supports Intel
®
Smart Response Technology***
* The U.2 port will be unavailable when installing the PCIe device in PCI_E6 slot.
** SATAe port is backward compatible with SATA.
*** This function will be supported depend on the CPU.
Continued on next page
RAID
USB
Audio
LAN
WLAN & Bluetooth
®
Back Panel
Connectors
Continued from previous page
Intel
®
X99 Chipset y
SATA1~6 ports support RAID 0, RAID1, RAID 5 and RAID 10 y
SATA7~10 ports only support IDE mode and AHCI mode.
y
ASMedia
®
ASM1142 Chipset
4x USB 3.1 Gen1 (SuperSpeed USB) ports (1 Type-A port and 1 Type-C port on the back panel, 2 ports available through the internal JUSB4 connector) y
VIA
®
VL805 Chipset
4x USB 3.1 Gen1 (SuperSpeed USB) ports on the back panel y
Intel
®
X99 Chipset
5x USB 3.1 Gen1 (SuperSpeed USB) ports (2 Type-A ports on the back panel, 1 internal Type-C port on the board, 2 ports available through the internal JUSB3 connector)
7x USB 2.0 (High-speed USB) ports (3 ports on the back panel, 4 ports available through the internal USB connectors) y
Realtek
®
ALC1150 Codec y
7.1-Channel High Definition Audio y
Supports S/PDIF output
1x Intel I218-V Gigabit LAN controller y
Wi-Fi/ Bluetooth
®
expansion module with Intel
®
Dual Band
Wireless-AC 8260 chip
Supports Wi-Fi 802.11 a/b/g/n/ac, dual band (2.4GHz,
5GHz) up to 867 Mbps speed.
Supports Dual Mode Bluetooth
®
2.1, 2.1+EDR, 3.0, 4.0,
BLE, 4.2
y
1x PS/2 keyboard/ mouse combo port y
3x USB 2.0 ports
1x BIOS FLASHBACK+ port y
1x Clear CMOS button y
7x USB 3.1 Gen1 ports y
1x USB 3.1 Gen1 Type-C port y
1x LAN (RJ45) port y
1x Optical S/PDIF OUT connector y
5x OFC audio jacks
Continued on next page
Specifications
17
Internal Connectors
Buttons
Switches
Jumpers
Continued from previous page y
1x 24-pin ATX main power connector y
1x 8-pin ATX 12V power connector y
1x 4-pin ATX 12V power connector y
1x flat 4-pin ATX 12V power connector* y
10x SATA 6Gb/s connectors y
2x USB 2.0 connectors (supports additional 4 USB 2.0 ports) y
2x USB 3.1 Gen1 connectors (supports additional 4 USB
3.1 Gen1 ports) y
1x USB 3.1 Gen1 Type-C port y
1x 4-pin CPU fan connector y
1x 4-pin Water Pump connector y
2x 4-pin OPT fan connectors y
3x 4-pin system fan connectors y
1x Front panel audio connector y
1x RGB LED connector y
1x TPM module connector y
1x OC retry button y
1x OC force enter BIOS button y
2x Front panel connectors y
1x Chassis Intrusion connector
* Provides additional power to PCIe x16 slots y
1x GAME BOOST button y
1x Power button y
1x Reset button y
1x BCLK+/ Ratio+ button y
1x BCLK-/ Ratio- button y
1x BIOS FLASHBACK+ button y
1x Multi-BIOS switch y
1x PCIe CeaseFire switch y
1x Slow mode booting switch y
1x BCLK-Ratio switch y
1x SE_USB switch*
* Please refer to page 39 for SE USB switch with examples of various combination possibilities.
y
1x Slow mode booting jumper y
1x Clear CMOS jumper
Continued on next page
18
Specifications
Debug LED
I/O Controller
Hardware Monitor
Form Factor
BIOS Features
Software
Continued from previous page y
1x 2-Digit Debug Code LED
NUVOTON NCT6792D Controller Chip y
CPU/System temperature detection y
CPU/System fan speed detection y
CPU/System fan speed control y
EATX Form Factor y
12.0 in. x 10.7 in. (30.5 cm x 27.2 cm) y
2x 128 Mb flash y
UEFI AMI BIOS y
ACPI 5.0, PnP 1.0a, SM BIOS 2.8
y
Multi-language y
Drivers y
COMMAND CENTER y
LIVE UPDATE 6 y
FAST BOOT y
SUPER CHARGER y
GAMING APP y
SMART UTILITIES y
M-CLOUD y
RAMDISK y
USB SPEED UP y
GAMING LAN MANAGER y
Nahimic 2 y
XSplit Gamecaster V2 y
Intel
®
Extreme Tuning Utility y
Norton™ Internet Security Solution y
Google Chrome™ ,Google Toolbar, Google Drive y
SteelSeries Engine 3 y
CPU-Z MSI GAMING y
Intel
®
Turbo Boost Max Technology 3.0
Continued on next page
Specifications
19
Enthusiast GAMING
Features
Continued from previous page y
AUDIO BOOST 3
Isolated Audio PCB
EMI Shielding
Dual Headphone Amplifiers
High Quality Audio Capacitors
Golden Audio Connectors y
GAME BOOST
Easy Overclocking
7 Gear Clock Change y
GAMING LAN
Intel
®
Gigabit Ethernet
GAMING Network Manager power by cFos
Electric Wave Surge y
GAMING APP
System Mode Switching: OC/Gaming/Silent
Gaming Hotkey
Gaming Mouse Control
Gaming LED Control y
Optimized Thermal Design
Heat-pipe Direct Touch Technology
Enhanced Choke Thermal Design y
Nahimic 2
Sound Tracker
HD Audio Recorder 2
Expert Mode
Sound Effect Equalizer
Microphone Noise Reduction y
XSplit
XSplit GAMECASTER V2
XSplit BROADCASTER V2 y
GAMING CERTIFIED y
WTFast GPN
2-Month Premium License*
Multi-Server Network Optimization
Advanced Lag Spike & Disconnect Reduction
* This offer is valid for a limited period only, for more information please visit www.msi.com
Continued on next page
20
Specifications
MSI Exclusive
Features
Continued from previous page y
CLICK BIOS 5
EZ Mode & Advanced Mode Switching
Board Explorer
Hardware Monitor y
BIOS FLASHBACK+ y
MILITARY CLASS 5
Military Class Component
Military Class Stability and Reliability
ESD Protection
EMI Protection
Humidity Protection
Circuit Protection
High Temperature Protection
VGA Armor Slot y
COMMAND CENTER
System Monitor
Smart Fan Control y
RAMDISK y
LIVE UPDATE 6 y
M-CLOUD y
USB Redrivers y
CPU-Z MSI GAMING y
Steel Series Engine 3 y
SUPER CHARGER
Continued on next page
Specifications
21
Specification
Highlights
Continued from previous page y
DDR4 BOOST Support
Quad-Channel DDR4 Memory Support
Isolated DDR4 Circuit Design
DDR4 XMP Ready
Steel Armor Ready y
PCI Express 3.0 Support
4-Way Nvidia SLI™ Support
4-Way AMD CrossFire™ Support y
USB 3.1 Gen1 Type-C Ready y
Turbo M.2 Ready
PCIe 3.0 x4 (32 Gb/s) Support
PCIe/ SATA Dual Mode Support
Steel Armor Ready y
SATA Express Support y
U.2 Ready y
NVMe / AHCI Driver Support y
2-Digit Debug Code LED y
EZ Debug LED 2 y
RGB LED pin header
22
Specifications
Block Diagram
4 Channel DDR4 Memory
U.2
M.2
SATA Express
USB 3.1 Gen1
ASMEDIA
ASM1142
SATA 6Gb/s
USB 3.1 Gen1
USB 2.0
Processor
Switch
PCI Express Bus
DMI 3.0 x1
PCIe x1 slot x1
Intel I218V x1
Wi-Fi /
Bluetooth
Switch
LPC Bus
X99 PCH
PCI Express Bus x2
ASMEDIA
ASM1142
USB 3.1 Gen1
PCI Express Bus x1
VIA
VL805
USB 3.1 Gen1
NV6792D
Super I/O
P/S2 Mouse / Keyboard
Realtek
ALC1150
Audio Jacks
Block Diagram
23
Rear I/O Panel
USB 2.0/
BIOS FLASHBACK+
LAN
PS/2
USB 3.1
Gen1
RP.SMA
Audio Ports
USB 2.0
Clear CMOS
USB 3.1 Gen1 USB 3.1 Gen1
Type-C
Optical S/PDIF-Out y
Clear CMOS button - Power off your computer. Press and hold the Clear CMOS button for about 5-10 seconds to reset BIOS to default values.
y
BIOS FLASHBACK+ port - Please refer to page 61 for Updating BIOS with BIOS
LAN Port LED Status Table
Link/ Activity LED
Status
Off
Yellow
Blinking
Description
No link
Linked
Data activity
Speed LED
Status
Off
Green
Orange
Description
10 Mbps connection
100 Mbps connection
1 Gbps connection
Audio Ports Configuration
Channel
Audio Ports
2 4 6 8
Center/ Subwoofer Out
Rear Speaker Out
Line-In/ Side Speaker Out
Line-Out/ Front Speaker Out
● ●
● ● ●
●
● ● ● ●
Mic In
( ●: connected, Blank: empty)
24
Rear I/O Panel
Realtek HD Audio Manager
After installing the Realtek HD Audio driver, the Realtek HD Audio Manager icon will appear in the system tray. Double click on the icon to launch.
Device
Selection Advanced
Settings
Jack Status
Application
Enhancement
Main Volume
Connector
Strings
Profiles y
Device Selection - allows you to select a audio output source to change the related options. The check sign indicates the devices as default.
y
Application Enhancement - the array of options will provide you a complete guidance of anticipated sound effect for both output and input device.
y
Main Volume - controls the volume or balance the right/left side of the speakers that you plugged in front or rear panel by adjust the bar.
y
Profiles - toggles between profiles.
y
Advanced Settings - provides the mechanism to deal with 2 independent audio streams.
y
Jack Status - depicts all render and capture devices currently connected with your computer. y
Connector Settings - configures the connection settings.
Auto popup dialog
When you plug into a device at an audio jack, a dialogue window will pop up asking you which device is current connected.
Each jack corresponds to its default setting as shown on the next page.
Rear I/O Panel
25
Audio jacks to headphone and microphone diagram
Audio jacks to stereo speakers diagram
AUDIO INPUT
Audio jacks to 7.1-channel speakers diagram
AUDIO INPUT
Rear Front
Side Center/
Subwoofer
26
Rear I/O Panel
Installing Antennas
1.
Screw the antennas tight to the RP-SMA connectors as shown.
2.
Place the antennas as high as possible.
Rear I/O Panel
27
Overview of Components
DIMM3
DIMM2
DIMM4
JPWR3
DIMM1
JPWR2
CPU Socket
DIMM8
DIMM5
DIMM6
DIMM7
OC1
CPUFAN1
SYSFAN1
FLASHB1
PCI_E1
PCI_E2
PCI_E3
PCI_E4
M2_1
PCI_E5
JCI1
PCI_E6
JLED1
JAUD1
JPWR4
SATA9
JTPM1
JSLOW_1
SYSFAN2
SYSFAN3
OC_RT1
JFP1
JUSB2
JUSB1
JFP2
SE_USB_SW1
SE1_65
MULTI_BIOS_SWITCH
OC_FS1
JUSB3
SATA1_2
SATA3_4
SATA7_8
U2_1
SATA10
PEGSW1
BLKOC_SEL1
SLOW_1
FV1
RESET1
SW-TACT1
SW-TACT2
PUMPFAN1
OPTFAN2
JPWR1
OPTFAN1
DISCH1
USB5
JUSB4
28
Overview of Components
Component Contents
Port Name
DIMM1~8
Port Type
Clear CMOS (Reset BIOS) Jumper
Slow Mode Booting Switch/ Jumper
Plus, Minus Button, BCLK-Ratio Switch
Page
Overview of Components
29
CPU Socket
Introduction to the LGA 2011-3 CPU
The surface of the LGA2011-3 CPU has four alignment keys and a yellow triangle to assist in correctly lining up the CPU for motherboard placement. The yellow triangle is the Pin 1 indicator.
Important
y
Always unplug the power cord from the power outlet before installing or removing the CPU.
y
Please retain the CPU protective cap after installing the processor. MSI will deal with Return Merchandise Authorization (RMA) requests if only the motherboard comes with the protective cap on the CPU socket.
y
When installing a CPU, always remember to install a CPU heatsink. A CPU heatsink is necessary to prevent overheating and maintain system stability.
y
Confirm that the CPU heatsink has formed a tight seal with the CPU before booting your system.
y
Overheating can seriously damage the CPU and motherboard. Always make sure the cooling fans work properly to protect the CPU from overheating. Be sure to apply an even layer of thermal paste (or thermal tape) between the CPU and the heatsink to enhance heat dissipation.
y
Whenever the CPU is not installed, always protect the CPU socket pins by covering the socket with the plastic cap.
y
If you purchased a separate CPU and heatsink/ cooler, Please refer to the documentation in the heatsink/ cooler package for more details about installation.
y
This motherboard is designed to support overclocking. Before attempting to overclock, please make sure that all other system components can tolerate overclocking. Any attempt to operate beyond product specifications is not recommended. MSI
®
does not guarantee the damages or risks caused by inadequate operation beyond product specifications.
30
Overview of Components
DIMM Slots
DIMM1
DIMM3
DIMM8
DIMM6
Channel A Channel B Channel D Channel C
DIMM7
DIMM5
DIMM2
DIMM4
Memory module installation recommendation
DIMM1
DIMM3
DIMM1
DIMM3
DIMM1
DIMM5
DIMM7
DIMM3
DIMM2
DIMM1
DIMM5
DIMM6
DIMM7
Overview of Components
31
DIMM4
DIMM3
DIMM2
DIMM1
DIMM5
DIMM6
DIMM7
DIMM8
Important
y
Always insert a memory module in the DIMM1 slot first.
y
To ensure system stability for Dual/ Triple/ Quad channel mode, memory modules must be of the same type, number and density. And for every channel, the odd number DIMM slot must to be installed first.
y
Due to chipset resource usage, the available capacity of memory will be a little less than the amount of installed.
y
Based on Intel CPU specification, the Memory DIMM voltage below 1.35V is suggested to protect the CPU.
y
Please note that the maximum capacity of addressable memory is 4GB or less for 32-bit Windows OS due to the memory address limitation. Therefore, we recommended that you to install 64-bit Windows OS if you want to install more than
4GB memory on the motherboard.
y
Some memory may operate at a lower frequency than the marked value when overclocking due to the memory frequency operates dependent on its Serial
Presence Detect (SPD). Go to BIOS and find the Memory Try It! to set the memory frequency if you want to operate the memory at the marked or at a higher frequency.
y
It is recommended to use a more efficient memory cooling system for full DIMMs installation or overclocking.
y
The stability and compatibility of installed memory modules depend on installed
CPU and devices when overclocking.
32
Overview of Components
PCI_E1~6: PCIe Expansion Slots
PCI_E1: PCIe 3.0 x16
PCI_E2: PCIe 3.0 x8
PCI_E3: PCIe 3.0 x8
PCI_E4: PCIe 3.0 x16
PCI_E5: PCIe 2.0 x1
PCI_E6: PCIe 3.0 x4/ x8
Important
y
For a single PCIe x16 expansion card installation with optimum performance, using the PCI_E1 slot is recommended.
y
When adding or removing expansion cards, always turn off the power supply and unplug the power supply power cable from the power outlet. Read the expansion card ’s documentation to check for any necessary additional hardware or software changes y
If you install a large and heavy graphics card, you need to use a tool such as MSI
Gaming Series Graphics Card Bolster to support its weight to prevent deformation of the slot.
PCIe bandwidth tables
for 40 lanes CPUs
Graphics Card
PCI_E1
PCI_E2
PCI_E3
PCI_E4
PCI_E5
Single
@ 3.0 x16
─
─
─
2.0 x1
2-Way*
@ 3.0 x16
─
─
@ 3.0 x16
2.0 x1
2-Way
@ 3.0 x8
─
@ 3.0 x8
─
2.0 x1
3-Way*
@ 3.0 x16
─
─
@ 3.0 x16
2.0 x1
3-Way
@ 3.0 x8
─
@ 3.0 x8
─
2.0 x1
PCI_E6
U2_1
─ ─ ─
3.0 x4 ─ 3.0 x4 ─ 3.0 x4 ─
@ 3.0 x8
─
@ 3.0 x8
─
M2_1(PCIe) 2.0 x2 3.0 x4 2.0 x2 3.0 x4 2.0 x2 3.0 x4 2.0 x2
(@: graphics card slot, ─: empty slot, *: best combination)
2.0 x2
3-Way
@ 3.0 x8
@ 3.0 x8
─
@ 3.0 x16
2.0 x1
─
3.0 x4 ─
2.0 x2 3.0 x4
4-Way
@ 3.0 x8
@ 3.0 x8
─
@ 3.0 x16
2.0 x1
@ 3.0 x8
─
2.0 x2
for 28 lanes CPUs
Graphics Card
PCI_E1
Single
@ 3.0 x16
2-Way*
@ 3.0 x16
2-Way
@ 3.0 x8
3-Way
@ 3.0 x8
4-Way
@ 3.0 x8
PCI_E2
PCI_E3
PCI_E4
PCI_E5
PCI_E6
─
─
─
2.0 x1
─
3.0 x4 ─
─
─
@ 3.0 x8
2.0 x1
─
3.0 x4 ─
─
@ 3.0 x8
─
2.0 x1
─
3.0 x4 ─
@ 3.0 x8
─
@ 3.0 x8
2.0 x1
─
3.0 x4 ─
@ 3.0 x8
─
@ 3.0 x8
2.0 x1
@ 3.0 x4
U2_1 ─
M2_1(PCIe) 2.0 x2 3.0 x4 2.0 x2 3.0 x4 2.0 x2 3.0 x4 2.0 x2 3.0 x4
(@: graphics card slot, ─: empty slot, *: best combination)
2.0 x2
Overview of Components
33
Multiple graphics cards installation recommendation
PCI_E1
For 40 lanes CPUs
PCI_E1
For 28 lanes CPUs
PCI_E4
PCI_E1
PCI_E4
PCI_E6
PCI_E1
PCI_E2
PCI_E4
34
Overview of Components
PCI_E1
PCI_E2
PCI_E4
PCI_E6
Installing SLI graphics cards
For power supply recommendations for SLI configurations, please refer to the user guide of your graphics card to make sure you meet all the system requirements.
To install SLI graphics cards:
1.
Turn off your computer and disconnect the power cord, install two graphics cards into the PCI_E1 and PCI_E4 slots.
2.
Connect the two cards together using the SLI Bridge Connector.
3.
Connect all PCIe power connectors of the graphics cards.
4.
Reconnect the power cord, power up the computer and install the drivers and software included in your graphics card package.
5.
Right-click the Windows desktop and select NVIDIA Control Panel from the menu, click on Configure SLI, Surround, PhysX in the left task pane and select Maximize
3D performance in the SLI configuration menu, and then click Apply.
PEGSW1: PCIe CeaseFire Switch
The PCIe CeaseFire switch allows you to enable/ disable the PCIe slots conveniently and directly.
Enable the
PCIe slot
PCI_E6 slot
PCI_E4 slot
PCI_E2 & PCI_E3 slot
PCI_E1 slot
Disable the
PCIe slot
Overview of Components
35
SATA1~10: SATA 6Gb/s Connectors
These connectors are SATA 6Gb/s interface ports. Each connector can connect to one
SATA device.
SATA8
SATA7
SATA4
SATA3
SATA2
SATA1
SATA9
SATA10
SATA6
SATA5
SE1_65: SATAe Connectors
These connectors are SATAe (SATA Express) interface ports. Each SATAe connector can be used with a single SATAe device or two legacy SATA devices.
SATA6
SATA5
SATAe
Important
y
Please do not fold the SATA or SATAe cable at a 90-degree angle. Data loss may result during transmission otherwise.
y
SATA or SATAe cables have identical plugs on either sides of the cable. However, it is recommended that the flat connector be connected to the motherboard for space saving purposes.
36
Overview of Components
M2_1: M.2 Slot (Key M)
Important
y
Intel
®
RST only supports PCIe M.2 SSD with UEFI ROM, does not support Legacy ROM.
Video Demonstration
Watch the video to learn how to Install M.2 module.
http://youtu.be/JCTFABytrYA
Installing M.2 module
1.
Remove the screw from the base screw.
2.
Remove the base screw.
1
2
3.
Tighten the base screw into the hole of the distance to the M.2 slot as the length your M.2 module.
4.
Insert your M.2 module into the M.2 slot at a
30-degree angle.
3
30 °
4
5.
Put the screw in the notch on the trailing edge of your M.2 module and tighten it into the base screw.
5
Overview of Components
37
U2_1: U.2 Connector
This connector is a U.2 interface port. Each connector can connect to one PCIe 3.0 x4
NVMe storage device.
Video Demonstration
Watch the video to learn how to Install
U.2 SSD. http://youtu.be/KgFvKDxymvw
Installing U.2 SSD
1.
Connect the U.2 cable to the U.2 connector on the motherboard.
2.
Connect the U.2 cable to the U.2 SSD.
3.
Connect the U.2 cable to power adapter cable.
U.2 SSD
U.2 Connector
1
U.2 Cable
2
3
Connect to power adapter cable
38
Overview of Components
SE_USB_SW1: SE USB Switch
This switch allows you to switch between JUSB4 connector and SE1_65 connector.
Please refer to the below table for more information.
SE_USB_SW1
PCI_E6
U2_1
JUSB4
M2_1(PCIe)
M2_1(SATA)
SE1_65(SATAe)
SE1_65(SATA5/6)
Important
You can also use the BIOS > SETTINGS >
Advanced > SATA USB3.1 Gen1 Switch item to switch between JUSB4 connector and SE1_65 connector.
✓
─
2.0x2
─
─
─
─
Switch to JUSB4
─
3.0x4
2.0x2
─
─
─
─
─
─
2.0x2
3.0x4
─
─
─
JUSB4
SE1_65
SE_USB_SW1 Switch to SE1_65
PCI_E6
U2_1
JUSB4
M2_1(PCIe)
M2_1(SATA)
✓
─
✓
─
─ ─
2.0x2
─
✓
─
─
─
─
6Gb/s
─
SE1_65(SATAe) ─
SE1_65(SATA5/6) ─
✓
─
─
─
─
─
3.0x4
─
2.0x2
─
6Gb/s
─
─
2.0x2
─
─ ─
6Gb/ s
─
─
─
3.0x4
─
─
─
─
─
3.0x4
─
─
2.0x2
─
─
3.0x4
─
─
3.0x4
3.0x4
─
─
6Gb/s
─
─
─
─
2.0x2
─
─
─
─
─
─
6Gb/s
SE USB switch with examples of various combination possibilities
1xM.2 PCIe SSD + 10xSATA HDDs
1xM.2 PCIe SSD + 8xSATA HDDs +
1xSATAe HDD
M.2 PCIe
SATA6 SATA5
Switch to SE1_65
M.2 PCIe
SATAe
Switch to SE1_65
Overview of Components
39
1xU.2 SSD + 10xSATA HDDs
1xU.2 SSD + 8xSATA HDDs +
1xSATAe HDD
SATA6 SATA5
Switch to SE1_65
1xU.2 SSD + 1xM.2 SATA SSD +
8xSATA HDDs
SATAe
Switch to SE1_65
1xU.2 SSD + 1xM.2 PCIe SSD +
8xSATA HDDs
M.2 SATA M.2 PCIe
Switch to SE1_65
1xPCI_E6 Device + 10xSATA HDDs
Switch to SE1_65
1xPCI_E6 Device + 8xSATA HDDs +
1xSATAe HDD
PCI_E6
SATA6 SATA5
Switch to SE1_65
40
Overview of Components
PCI_E6
SATAe
Switch to SE1_65
1xPCI_E6 Device + 1xM.2 SATA SSD +
8xSATA HDDs
1xPCI_E6 Device + 1xM.2 PCIe SSD +
8xSATA HDDs
M.2 SATA
PCI_E6
M.2 PCIe
PCI_E6
Switch to SE1_65
JUSB4 USB Devices + 1xPCI_E6 Device
Switch to SE1_65
JUSB4 USB Devices + 1xM.2 PCIe SSD
PCI_E6
Switch to JUSB4
JUSB4 USB Devices +1xU.2 SSD
M.2 PCIe
Switch to JUSB4
Switch to JUSB4
Overview of Components
41
OC1: GAME BOOST Knob
This knob allows you to manually select a stage from number 0 (default) to number 11
(extreme) for overclocking the Intel X-SKU processors. The processor ’s voltage and frequency will be automatically adjusted after you power on your computer.
GAME BOOST knob
0
1
1
8
6
0 1
2
4
Using GAME BOOST Knob
To setup the GAME BOOST knob, take the following steps:
1.
Set the GAME BOOST knob to hardware mode in BIOS Setup.
Note: To make sure the GAME BOOST is controlled by hardware, please refer to the
GAME BOOST LED indicators next to the GAME BOOST knob on the motherboard.
The red LED indicates the GAME BOOST is controlled by hardware and the white by software. You can switch between hardware and software in BIOS Setup.
2.
Power off the computer.
3.
Rotate the GAME BOOST knob to select the overclocking stage as you desire.
4
6
8
0
1
2
10
Stage
11
CPU Frequency
Broadwell-E Haswell-E i7-6950K i7-6900K i7-6850K i7-6800K i7-5960X i7-5930X i7-5820X
GAME BOOST disabled GAME BOOST disabled
3.6 GHz 3.8 GHz 3.9 GHz 3.7 GHz 3.7 GHz 3.9 GHz 3.8 GHz
3.7 GHz 3.9 GHz 4.0 GHz 3.8 GHz 3.8 GHz 4.0 GHz 3.9 GHz
3.9 GHz 4.0 GHz 4.1 GHz 3.9 GHz 4.0 GHz 4.2 GHz 4.1 GHz
4.1 GHz 4.2 GHz 4.3 GHz 4.1 GHz 4.2 GHz 4.4 GHz 4.3 GHz
4.3 GHz 4.3 GHz 4.4 GHz 4.2 GHz 4.4 GHz 4.6 GHz 4.5 GHz
4.5~4.4
GHz
4.6~4.5
GHz
4.6~4.4
GHz
4.7~4.5
GHz
4.7~4.6
GHz
4.8~4.7
GHz
4.5~4.4
GHz
4.7~4.6
GHz
4.6 GHz
4.8 GHz
4.8 GHz
5.0 GHz
4.7 GHz
4.9 GHz
4.
Power on and then GAME BOOST will automatically overclock processor depending on the stage you selected.
42
Overview of Components
To disable GAME BOOST:
1.
Set the GAME BOOST knob to HW mode in BIOS Setup.
2.
Power off the computer.
3.
Rotate the GAME BOOST knob to 0 and then power on. The configuration parameters will be returned to its default values.
Important
y
You can also control the GAME BOOST function in BIOS Setup or with MSI
COMMAND CENTER software.
y
In order to optimize performance and improve system stability, when you activate the GAME BOOST function, please leave the settings in the BIOS > OC menu unchanged.
y
The success of overclocking depends on the components of your computer.
y
We do not guarantee the GAME BOOST overclocking range or the damages/risks caused by overclocking behavior.
y
MSI components are recommended for better compatibility when using GAME
BOOST function.
SLOW_1, JSLOW_1: Slow Mode Booting Switch/ Jumper
These switch and jumper are used for LN2 cooling solution, that provides the extreme overclocking conditions, to boot at a stable processor frequency and to prevent the system from crashing. You can use either switch or jumper to enable the Slow Mode.
White LED indicates that the Slow Mode is enabled
Enabled
(Please enable this function during BIOS
POST.)
Normal
(Default)
Enabled
(Please enable this function during BIOS POST.)
Normal
(Default)
Important
y
Users will try extreme low temperature overclocking at their own risks. The overclocking results will vary according to the CPU version.
y
Please don ’t switch to Enabled when power-off or the system will be un-bootable.
Overview of Components
43
JPWR1~4: Power Connectors
These connectors allow you to connect an ATX power supply.
12
1
24
13
JPWR1
9
10
7
8
11
12
3
4
1
2
5
6
1
2
3
4
1
2
Ground
Ground
Ground
Ground
8
4
Ground
Ground
Ground
PWR OK
5VSB
+12V
+12V
+3.3V
+3.3V
+3.3V
Ground
+5V
Ground
+5V
4
2
7
8
5
6
5
1
JPWR2
3
1
JPWR3
3
4
21
22
19
20
23
24
15
16
13
14
17
18
+12V
+12V
+12V
+12V
+12V
+12V
Ground
Res
+5V
+5V
+5V
Ground
+3.3V
-12V
Ground
PS-ON#
Ground
Ground
1
JPWR4
1
2
+12V
Ground
3
4
Ground
+5V
Important
Make sure that all the power cables are securely connected to a proper ATX power supply to ensure stable operation of the motherboard.
44
Overview of Components
JFP1, JFP2: Front Panel Connectors
These connectors connect to the switches and LEDs on the front panel.
2 10
JFP1
5
7
1
3
9
1
HDD LED +
HDD LED -
Reset Switch
Reset Switch
Reserved
9
6
8
2
4
10
Power LED +
Power LED -
Power Switch
Power Switch
No Pin
1
JFP2
1
3
Speaker -
Buzzer -
2
4
Buzzer +
Speaker +
JUSB3~4: USB 3.1 Gen1 Connectors
These connectors allow you to connect USB 3.1 Gen1 ports on the front panel.
10 11
1 20
1
4
5
2
3
6
7
8
9
10
Power
USB3_RX_DN
USB3_RX_DP
Ground
USB3_TX_C_DN
USB3_TX_C_DP
Ground
USB2.0-
USB2.0+
Ground
11
14
15
12
13
16
17
18
19
20
USB2.0+
USB2.0-
Ground
USB3_TX_C_DP
USB3_TX_C_DN
Ground
USB3_RX_DP
USB3_RX_DN
Power
No Pin
Important
Note that the Power and Ground pins must be connected correctly to avoid possible damage.
Overview of Components
45
Charger Port
The JUSB4 connector is a charger port which can increase USB power output for fast charging your smartphone or USB-powered devices.
The Charger Port is hardware controlled by motherboard chip, it can still charge your device in suspend, hibernate state or even shutdown states. However, when you boot the computer into Windows
®
, you will need to install the MSI
®
SUPER CHARGER application to turn ON/OFF the Charging mode.
Video Demonstration
Watch the video to learn how to charge the smartphone with Super-
Charger.
http://youtu.be/FCyvjr5NbOw
Important
When the Charging mode is enabled, the Charger Port data syncing will be disabled.
USB5: USB 3.1 Gen1 Type-C Connector
This connector is a USB 3.1 Gen1 Type-C connector. Each connector can connect to one USB 3.1 Gen1 device.
46
Overview of Components
JUSB1~2: USB 2.0 Connectors
These connectors allow you to connect USB 2.0 ports on the front panel.
2 10
1 9
5
7
1
3
9
VCC
USB0-
USB0+
Ground
No Pin
6
8
2
4
10
VCC
USB1-
USB1+
Ground
NC
Important
y
Note that the VCC and Ground pins must be connected correctly to avoid possible damage.
y
In order to recharge your iPad,iPhone and iPod through USB ports, please install
MSI
®
SUPER CHARGER utility.
JTPM1: TPM Module Connector
This connector is for TPM (Trusted Platform Module). Please refer to the TPM security platform manual for more details and usages.
2 14
5
7
1
3
9
11
13
1
LPC Clock
LPC Reset
LPC address & data pin0
LPC address & data pin1
LPC address & data pin2
LPC address & data pin3
LPC Frame
13
6
8
2
4
10
12
14
3V Standby power
3.3V Power
Serial IRQ
5V Power
No Pin
Ground
Ground
Overview of Components
47
CPUFAN1,SYSFAN1~3, OPTFAN1~2, PUMPFAN1: Fan Connectors
Fan connectors can be classified as PWM (Pulse Width Modulation) Mode and Voltage
Mode. PWM Mode fan connectors provide constant 12V output and adjust fan speed with speed control signal. Voltage Mode fan connectors control fan speed by changing voltage. Therefore, when you plug a 3-pin (Non-PWM) fan to a PWM Mode fan connector, the fan speed will be always maintained at 100%, and that could be noisy.
PWM Mode fan connector
1
3
Ground
Sense
1
CPUFAN1
2
4
Voltage Mode fan connector
+12V
Speed Control Signal
1
1
3
1
SYSFAN1/ PUMPFAN1/
OPTFAN1/ OPTFAN2
Ground
Sense
2
4
SYSFAN2/ SYSFAN3
Voltage Control
NC
Controlling the fan speed
There are two ways to manage fan speed. One is to go to BIOS > HARDWARE
MONITOR. The other is to use COMMAND CENTER application.
BIOS > HARDWARE MONITOR COMMAND CENTER
Both methods offer gradient points of the fan speed that allow you to adjust fan speed in relation to CPU temperature.
48
Overview of Components
FV1: V-Check Points Connectors
These voltage checkpoints are used to measure the current system voltages. A multimeter (not included) will be required to check voltages.
9
1
GND
GND
GND
CORE
RING
SA
DDR23
DDR01
VCCIN
To measure voltage, please use the optional voltage checkpoint cables included in the motherboard package and follow the below steps:
1.
Insert the cube end of the V-Check cables into the GND pin and the voltage pin you want to measure.
2.
Connect circular end of the V-Check cables to the test leads.
3.
Measure voltage with your multimeter.
2
1
1
2
3
Overview of Components
49
JAUD1: Front Audio Connector
This connector allows you to connect audio jacks on the front panel.
2 10
5
7
1
3
9
MIC L
MIC R
Head Phone R
SENSE_SEND
Head Phone L
1
6
8
2
4
10
9
Ground
NC
MIC Detection
No Pin
Head Phone Detection
JCI1: Chassis Intrusion Connector
This connector allows you to connect the chassis intrusion switch cable.
Normal
(default)
Trigger the chassis intrusion event
Using chassis intrusion detector
1.
Connect the JCI1 connector to the chassis intrusion switch/ sensor on the chassis.
2.
Close the chassis cover.
3.
Go to BIOS > SETTINGS > Security > Chassis Intrusion Configuration.
4.
Set Chassis Intrusion to Enabled.
5.
Press F10 to save and exit and then press the Enter key to select Yes.
6.
Once the chassis cover is opened again, a warning message will be displayed on screen when the computer is turned on.
Resetting the chassis intrusion warning
1.
Go to BIOS > SETTINGS > Security > Chassis Intrusion Configuration.
2.
Set Chassis Intrusion to Reset.
3.
Press F10 to save and exit and then press the Enter key to select Yes.
50
Overview of Components
BIOS_SW1: Multi-BIOS Switch
This motherboard has two built-in BIOS ROMs (Labeled A and B, default BIOS ROM is
A). If one is crashed, you can shift to the other for booting by sliding the switch.
BIOS B LED BIOS A LED
BIOS B BIOS A
(Default)
Recovering BIOS
When BIOS updating fails or causes the computer non-bootable, you can recover the failed BIOS by the steps below. Before recovering, please download the latest BIOS file that matches your motherboard model from MSI website. And then save the BIOS file to the root of the USB flash drive.
1.
Power off the computer.
2.
Switch to the normal BIOS ROM with Multi-BIOS Switch.
3.
Insert the USB flash drive into the computer.
4.
Power on the computer and press Del key to enter BIOS setup during POST.
5.
Go to BIOS > M-FLASH and click on Yes to reboot the system and enter the flash mode.
6.
Select a BIOS file to perform the BIOS recovering process.
7.
Switch to the failed BIOS ROM with Multi-BIOS Switch, and click on Yes to start recovering BIOS.
8.
After the recovering process is completed, the system will reboot automatically.
Important
y
Do not use the Multi-BIOS switch when system is booting up.
y
You can also use the Live Update utility to flash BIOS. Please refer to BIOS section for details.
Overview of Components
51
JBAT1: Clear CMOS (Reset BIOS) Jumper
There is CMOS memory onboard that is external powered from a battery located on the motherboard to save system configuration data. If you want to clear the system configuration, set the jumper to clear the CMOS memory.
Keep Data
(default)
Clear CMOS/
Reset BIOS
Resetting BIOS to default values
1.
Power off the computer and unplug the power cord
2.
Use a jumper cap to short JBAT1 for about 5-10 seconds.
3.
Remove the jumper cap from JBAT1.
4.
Plug the power cord and power on the computer.
DISCH1: Discharge Button
This button allows you to discharge the motherboard by using the button instead of removing the battery. You can discharge the motherboard by pressing this button while the system is off.
Discharge Button
52
Overview of Components
FLASHB1: BIOS FLASHBACK+ Button
This button is used to activate the BIOS FLASHBACK+ function. Please refer to page
61 for Updating BIOS with BIOS FLASHBACK+.
POWER1, RESET1: Power Button, Reset Button
The Power / Reset button allows you to power on / reset the computer.
Reset
Power button Reset button
SW-TACT1~2, BLKOC_SEL1: Plus, Minus Button, BCLK-Ratio
Switch
Use the BCLK-Ratio switch to select BCLK or Ratio for Plus/ Minus Button, and you can use these buttons to increase or decrease the CPU BCLK or Ratio.
SW-TACT1
(BCLK+/ Ratio+)
Ratio
BCLK
SW-TACT2
(BCLK-/ Ratio-)
Overview of Components
53
OC_RT1, OC_FS1 : OC Retry Button, OC Force Enter BIOS Button
OC_RT1: When you press and hold this button, the system will keep retrying OC items until it boot up successfully.
OC_FS1: When you press this button, the system will be forced into BIOS without showing the OC_FAIL message.
OC_RT1
OC_FS1
JLED1: RGB LED connector
This connector allows you to connect the RGB LED strip.
1
3
+12V
R
1
2
4
G
B
1
Important
y
This connector supports 5050 RGB multi-color LED strips (12V/G/R/B) within 2 meters.
y
Always turn off the power supply and unplug the power cord from the power outlet before installing or removing the RGB LED strip.
y
Please use the LED Effect of GAMING APP to adjust, calibrate and control the LED light, refer to the Software section for details.
54
Overview of Components
LED Status Indicators
BIOS FLASHBACK+ LED
Debug Code LED
GAME BOOST HW LED
GAME BOOST SW LED
EZ Debug LED 2:
CPU
DRAM
VGA
BOOT
XMP LED
BIOS B LED
BIOS A LED
HDD LED
LED Status Table
LED LED Status Description
CPU White
EZ Debug LED 2
GAME BOOST HW
DRAM White
VGA White
BOOT White
Red
GAME BOOST SW
BIOS A
BIOS B
XMP
BIOS FLASHBACK+
HDD
White
Red
White
White
Blinking
Blinking
CPU is not detected or fail
Memory is not detected or fail
GPU is not detect or fail
Booting device is not detected or fail
GAME BOOST control by physical button
GAME BOOST control by BIOS
BIOS A in operation
BIOS B in operation
XMP enabled
BIOS flash is in progress
HDD activity
LED Status Indicators
55
Debug Code LED
The Debug Code LED displays progress and error codes during and after POST. Refer to the Debug Code LED table for details.
Hexadecimal Character Table
Hexadecimal 0 1 2 3 4 5 6 7 8 9 A B C D E F
Debug Code
LED display
0 1 2 3 4 5 6 7 8 9 A B C D E F
Boot Phases
Security (SEC) – initial low-level initialization
Pre-EFI Initialization (PEI) – memory initialization
Driver Execution Environment (DXE) – main hardware initialization
Boot Device Selection (BDS) – system setup, pre-OS user interface & selecting a bootable device (CD/DVD, HDD, USB, Network, Shell,
…)
Debug Code LED Table
SEC Progress Codes
01
02
03
04
06
07
08
09
0B
Power on. Reset type detection (soft/ hard)
AP initialization before microcode loading
System Agent initialization before microcode loading
PCH initialization before microcode loading
Microcode loading
AP initialization after microcode loading
System Agent initialization after microcode loading
PCH initialization after microcode loading
Cache initialization
SEC Error Codes
0C - 0D
Reserved for future AMI SEC error codes
0E
Microcode not found
0F
Microcode not loaded
PEI Progress Codes
10
11
12 - 14
PEI Core is started
Pre-memory CPU initialization is started
Pre-memory CPU initialization (CPU module specific)
15
16 - 18
19
1A - 1C
2B
2C
2D
2E
2F
31
32
33
34
35
36
Pre-memory System Agent initialization is started
Pre-Memory System Agent initialization
(System Agent module specific)
Pre-memory PCH initialization is started
Pre-memory PCH initialization (PCH module specific)
Memory initialization. Serial Presence
Detect (SPD) data reading
Memory initialization. Memory presence detection
Memory initialization. Programming memory timing information
Memory initialization. Configuring memory
Memory initialization (other)
Memory Installed
CPU post-memory initialization is started
CPU post-memory initialization. Cache initialization
CPU post-memory initialization.
Application Processor(s) (AP) initialization
CPU post-memory initialization. Boot
Strap Processor (BSP) selection
CPU post-memory initialization. System
Management Mode (SMM) initialization
56
Debug Code LED
37
38 - 3A
3B
3C - 3E
Post-Memory System Agent initialization is started
Post-Memory System Agent initialization
(System Agent module specific)
Post-Memory PCH initialization is started
Post-Memory PCH initialization (PCH module specific)
DXE IPL is started
4F
PEI Error Codes
54
55
56
57
50
51
52
53
58
59
Memory initialization error. Invalid memory type or incompatible memory speed
Memory initialization error. SPD reading has failed
Memory initialization error. Invalid memory size or memory modules do not match
Memory initialization error. No usable memory detected
Unspecified memory initialization error
Memory not installed
Invalid CPU type or Speed
CPU mismatch
CPU self test failed or possible CPU cache error
CPU micro-code is not found or microcode update is failed
5A
5B
Internal CPU error
Reset PPI is not available
5C - 5F
Reserved for future AMI error codes
DXE Progress Codes
60
61
62
63
64 - 67
68
69
6A
6B - 6F
70
71
DXE Core is started
NVRAM initialization
Installation of the PCH Runtime Services
CPU DXE initialization is started
CPU DXE initialization (CPU module specific)
PCI host bridge initialization
System Agent DXE initialization is started
System Agent DXE SMM initialization is started
System Agent DXE initialization (System
Agent module specific)
PCH DXE initialization is started
PCH DXE SMM initialization is started
9A
9B
9C
97
98
99
91
92
93
94
95
96
72
PCH devices initialization
73 - 77
PCH DXE Initialization (PCH module specific)
78
79
ACPI module initialization
CSM initialization
7A - 7F
Reserved for future AMI DXE codes
90
Boot Device Selection (BDS) phase is started
Driver connecting is started
PCI Bus initialization is started
PCI Bus Hot Plug Controller Initialization
PCI Bus Enumeration 32
PCI Bus Request Resources
PCI Bus Assign Resources
Console Output devices connect
Console input devices connect
Super IO Initialization
USB initialization is started
USB Reset
USB Detect
B0
B1
B2
AD
AE
AF
B3
B4
B5
A7
A8
A9
AB
A4
A5
A6
9D
USB Enable
9E -9F
Reserved for future AMI codes
A0
IDE initialization is started
A1
A2
A3
IDE Reset
IDE Detect
IDE Enable
SCSI initialization is started
SCSI Reset
SCSI Detect
SCSI Enable
Setup Verifying Password
Start of Setup
Setup Input Wait
Ready To Boot event
Legacy Boot event
Exit Boot Services event
Runtime Set Virtual Address MAP Begin
Runtime Set Virtual Address MAP End
Legacy Option ROM Initialization
System Reset
USB hot plug
PCI bus hot plug
Debug Code LED
57
B6
Clean-up of NVRAM
B7
Configuration Reset (reset of NVRAM settings)
B8 - BF
Reserved for future AMI codes
DXE Error Codes
D5
D6
D7
D8
D0
D1
D2
D3
D4
D9
DA
DB
DC
CPU initialization error
System Agent initialization error
PCH initialization error
Some of the Architectural Protocols are not available
PCI resource allocation error. Out of
Resources
No Space for Legacy Option ROM
No Console Output Devices are found
No Console Input Devices are found
Invalid password
Error loading Boot Option (LoadImage returned error)
Boot Option is failed (StartImage returned error)
Flash update is failed
Reset protocol is not available
S3 Resume Progress Codes
E0
E1
E2
S3 Resume is stared (S3 Resume PPI is called by the DXE IPL)
S3 Boot Script execution
Video repost
E3
OS S3 wake vector call
E4 - E7
Reserved for future AMI progress codes
S3 Resume Error Codes
E8
E9
S3 Resume Failed
S3 Resume PPI not Found
EA
EB
S3 Resume Boot Script Error
S3 OS Wake Error
EC - EF
Reserved for future AMI error codes
Recovery Progress Codes
F0
F1
Recovery condition triggered by firmware
(Auto recovery)
Recovery condition triggered by user
(Forced recovery)
F2
Recovery process started
F3
F4
Recovery firmware image is found
Recovery firmware image is loaded
F5 - F7
Reserved for future AMI progress codes
Recovery Error Codes
F8
Recovery PPI is not available
F9
FA
Recovery capsule is not found
Invalid recovery capsule
FB - FF
Reserved for future AMI error codes
ACPI States Codes
The following codes appear after booting and the operating system into ACPI modes.
01
02
03
04
05
10
20
30
40
AC
AA
System is entering S1 sleep state
System is entering S2 sleep state
System is entering S3 sleep state
System is entering S4 sleep state
System is entering S5 sleep state
System is waking up from the S1 sleep state
System is waking up from the S2 sleep state
System is waking up from the S3 sleep state
System is waking up from the S4 sleep state
System has transitioned into ACPI mode.
Interrupt controller is in PIC mode.
System has transitioned into ACPI mode.
Interrupt controller is in APIC mode.
CPU Temperature
00 - 99
Displays current CPU temperature after the system has fully booted into the OS.
58
Debug Code LED
BIOS Setup
The default settings offer the optimal performance for system stability in normal conditions. You should always keep the default settings to avoid possible system damage or failure booting unless you are familiar with BIOS.
Important
y
BIOS items are continuously update for better system performance. Therefore, the description may be slightly different from the latest BIOS and should be for reference only. You could also refer to the HELP information panel for BIOS item description.
y
The pictures in this chapter are for reference only and may vary from the product you purchased.
Entering BIOS Setup
Please refer the following methods to enter BIOS setup. y
Press Delete key, when the Press DEL key to enter Setup Menu, F11 to enter Boot
Menu message appears on the screen during the boot process.
y
Use MSI FAST BOOT application. Click on GO2BIOS button and choose OK. The system will reboot and enter BIOS setup directly.
Click on GO2BIOS y
Enable the GO2BIOS item (SETTINGS > Boot > GO2BIOS) in BIOS setup Advanced
mode (F7). It allows the system to enter BIOS setup directly by pressing the power button for 4 seconds upon bootup.
Function key
Key Function Key Function
F1
F4
F6
General Help
Enter CPU Specifications menu
Load optimized defaults
F3
F5
F8
Enter Favorites menu
Enter Memory-Z menu
Load Overclocking Profile
F9 Save Overclocking Profile F10 Save Change and Reset*
* When you press F10, a confirmation window appears and it provides the modification information. Select between Yes or No to confirm your choice.
BIOS Setup
59
Resetting BIOS
You might need to restore the default BIOS setting to solve certain problems. There are several ways to reset BIOS: y
Go to BIOS and press F6 to load optimized defaults.
y
Short the Clear CMOS jumper on the motherboard.
y
Press the Clear CMOS button, on the rear I/O panel. (Only for the motherboard with clear CMOS button.)
Updating BIOS
Updating BIOS with M-FLASH
Before updating:
Please download the latest BIOS file that matches your motherboard model from MSI website. And then save the BIOS file into the USB flash drive.
Updating BIOS:
1.
Press Del key to enter the BIOS Setup during POST.
2.
Insert the USB flash drive that contains the update file into the computer.
3.
Select the M-FLASH tab and click on Yes to reboot the system and enter the flash mode.
4.
Select a BIOS file to perform the BIOS update process.
5.
After the flashing process is 100% completed, the system will reboot automatically.
Updating the BIOS with Live Update 6
Before updating:
Make sure the LAN driver is already installed and the internet connection is set properly.
Updating BIOS:
1.
Install and launch MSI LIVE UPDATE 6.
2.
Select Manual scan.
3.
Check MB BIOS box and click on Scan button.
4.
Select the MB BIOS and click on icon to download and install the latest BIOS file.
5.
Click Next and choose In Windows mode. And then click Next and Start to start updating BIOS.
6.
After the flashing process is 100% completed, the system will restart automatically.
60
BIOS Setup
Updating BIOS with BIOS FLASHBACK+
Before updating:
Please download the latest BIOS file that matches your motherboard model from MSI
® website and rename the BIOS file to MSI.ROM. And then, save the MSI.ROM file to the root of USB flash drive.
Important
Only the FAT32 format USB flash drive supports updating BIOS by BIOS FLASHBACK+.
Updating BIOS:
1.
Connect power supply to JPWR1 and JPWR2. (No other components are necessary but power supply.)
2.
Plug the USB flash drive that contains the MSI.ROM file into the BIOS
FLASHBACK+ port on rear I/O panel.
3.
Press the BIOS FLASHBACK+ button to flash BIOS, and the BIOS FLASHBACK+
LED starts flashing.
4.
After the flashing BIOS process is 100% completed, the BIOS FLASHBACK+ LED stops flashing and be off.
BIOS Setup
61
EZ Mode
At EZ mode, it provides the basic system information and allows you to configure the basic setting. To configure the advanced BIOS settings, please enter the Advanced
Mode by pressing the Setup Mode switch or F7 function key.
XMP switch Setup Mode switch Screenshot Favorites
Language
System information
GAME BOOST switch
Information display
Boot device priority bar
M-Flash
Favorites
Hardware
Monitor
Function buttons y
Function buttons - enable or disable the LAN Option ROM, Fast Boot, HD audio
controller, IDE, AHCI, RAID, CPU Fan Fail Warning Control and BIOS Log Review by clicking on their respective button.
y
Hardware Monitor - click on this button to display the Hardware Monitor menu that allows you to manually control the fan speed by percentage.
y
M-Flash - click on this button to display the M-Flash menu that provides the way to update BIOS with a USB flash drive.
y
Information display - click on the CPU, Memory, Storage, Fan Info and Help buttons on left side to display related information. y
Boot device priority bar - you can move the device icons to change the boot priority.
The boot priority from high to low is left to right. y
System information - shows the CPU/ DDR speed, CPU/ MB temperature, MB/ CPU type, memory size, CPU/ DDR voltage, BIOS version and build date. y
Language - allows you to select the language of BIOS setup.
y
Screenshot - press this tab or the F12 key to take a screenshot and save it to USB flash drive (FAT/ FAT32 format only).
y
Setup Mode switch - press this tab or the F7 key to switch between Advanced mode and EZ mode.
y
XMP switch - click on the inner circle to enable/ disable the X.M.P. (Extreme Memory
Profile). Switch the outer circle to select the X.M.P. profile. This switch will only be available if the X.M.P. supported memory module is installed.
y
GAME BOOST switch - click on the center button to switch GAME BOOST control between software (SW) and hardware (HW) . The inner circle represents the current stage of hardware GAME BOOST and the outer circle stands for software. You can read the CPU frequency of each stage in GAME Boost mode by clicking on the
question mark in the right-bottom corner.
62
BIOS Setup
Important
Please don ’t make any changes in OC menu and don’t load defaults to keep the optimal performance and system stability after activating the GAME BOOST function. y
Favorites - press any Favorites tab or the F3 key to enter Favorites menu. It allows you to create personal BIOS menu where you can save and access favorite/ frequently-used BIOS setting items.
Default HomePage - allows you to select a BIOS menu (e.g. SETTINGS, OC...,etc) as the BIOS home page.
Favorite1~5 - allows you to add the frequently-used/ favorite BIOS setting items in one page.
To add a BIOS item to a favorite page (Favorite 1~5)
1.
Select a BIOS item in SETTINGS, OC or OC PROFILE menu.
2.
Right-click or press F2 key.
3.
Choose a favorite page and click on OK.
To delete a BIOS item from favorite page
1.
Select a BIOS item in favorite page (Favorite 1~5)
2.
Right-click or press F2 key.
3.
Choose Delete and click on OK.
BIOS Setup
63
Advanced Mode
Press Setup Mode switch or F7 function key can switch between EZ Mode and
Advanced Mode in BIOS setup.
XMP switch Setup Mode switch Screenshot Favorites
Language
System information
GAME BOOST switch
Boot device priority bar
BIOS menu selection
BIOS menu selection
Menu display y
GAME BOOST switch / XMP switch/ Setup Mode switch/ Screenshot/ Favorites/
Language/ System information/ Boot device priority bar - please refer to the descriptions of EZ Mode Overview section. y
BIOS menu selection - the following options are available:
SETTINGS - allows you to specify the parameters for chipset and boot devices.
OC - allows you to adjust the frequency and voltage. Increasing the frequency may get better performance.
M-FLASH - provides the way to update BIOS with a USB flash drive.
OC PROFILE - allows you to manage overclocking profiles.
HARDWARE MONITOR - allows you to set the speeds of fans and monitor voltages of system.
BOARD EXPLORER - provides the information of installed devices on this motherboard. y
Menu display - provides BIOS setting items and information to be configured.
64
BIOS Setup
SETTINGS
System Status
f
System Date
Sets the system date. Use tab key to switch between date elements.
The format is <day> <month> <date> <year>.
<day>
<month>
<date>
<year>
Day of the week, from Sun to Sat, determined by BIOS. Read-only.
The month from Jan. through Dec.
The date from 1 to 31 can be keyed by numeric function keys.
The year can be adjusted by users. f
System Time
Sets the system time. Use tab key to switch between time elements.
The time format is <hour> <minute> <second>. f
SATA PortX
Shows the information of connected SATA device.
Important
If the connected SATA device is not displayed, turn off computer and re-check SATA cable and power cable connections of the device and motherboard.
f
System Information
Shows detailed system information, including CPU type, BIOS version, and Memory
(read only).
f
DMI Information
Shows system information, desktop Board Information and chassis Information. (Read only).
Advanced
f
PCI Subsystem Settings
Sets PCI, PCI express interface protocol and latency timer. Press Enter to enter the sub-menu.
BIOS Setup
65
f
Above 4G Decoding [Disabled]
Enables or disables 64-bit capable devices to be decoded in above 4G address space. It is only available if the system supports 64-bit PCI decoding.
f
PEG X - PCI_EX-Gen X [Auto]
Sets PCI Express protocol of PCIe x16 slots for matching different installed devices.
[Auto] This item will be configured automatically by BIOS.
[Gen1] Enables PCIe Gen1 support only.
[Gen2]
[Gen3]
Enables PCIe Gen2 support only.
Enables PCIe Gen3 support only.
f
PCI Latency Timer [32]
Sets latency timer of PCI interface device.
[Options: 32, 64, 96, 128, 160, 192, 224, 248 PCI Bus clocks] f
SATA USB3.1 Gen1 Switch [SATA]
f
ACPI Settings
Sets ACPI parameters of onboard power LED behaviors. Press Enter to enter the submenu. f
Power LED [Blinking]
Sets shining behaviors of the onboard Power LED.
[Dual Color] The power LED turns to another color to indicate the S3 state.
[Blinking] The power LED blinks to indicate the S3 state.
f
CPU Temperature Alarm [Disabled]
Sets an audible alarm for the CPU temperature.
[Disabled] Disables the CPU temperature alarm.
[65, 70, 75, 80, 85, 90, 95] Enables the alarm and sets the warning temperature.
f
Integrated Peripherals
Sets integrated peripherals' parameters, such as LAN, HDD, USB and audio. Press
Enter to enter the sub-menu. f
Onboard LAN Controller [Enabled]
Enables or disables the onboard LAN controller.
f
LAN Option ROM [Disabled]
Enables or disables the legacy network Boot Option ROM for detailed settings. This item will appear when Onboard LAN Controller is enabled.
[Enabled] Enables the onboard LAN Boot ROM.
[Disabled] Disables the onboard LAN Boot ROM.
f
Network Stack [Disabled]
Sets UEFI network stack for optimizing IPv4 / IPv6 function.
[Enabled] Enables UEFI network stack.
[Disabled] Disables UEFI network stack.
66
BIOS Setup
f
Ipv4 PXE Support [Enabled]
“Enabled”, the system UEFI network stack will support Ipv4 protocol. This
“Network Stack” is enabled.
[Enabled] Enables the Ipv4 PXE boot support.
[Disabled] Disables the Ipv4 PXE boot support.
f
Ipv6 PXE Support [Enabled]
When Enabled, the system UEFI network stack will support Ipv6 protocol. This item will appear when Network Stack is enabled.
[Enabled] Enables the Ipv6 PXE boot support.
[Disabled] Disables the Ipv6 PXE boot support.
f
SATA Mode [AHCI Mode] (For SATA1~6)
Sets the operation mode of the onboard SATA controller.
[IDE] Specify the IDE mode for SATA storage devices.
[AHCI Mode] Specify the AHCI mode for SATA storage devices. AHCI (Advanced
Host Controller Interface) offers some advanced features to enhance the speed and performance of SATA storage device, such as Native
Command Queuing (NCQ) and hot-plugging.
[RAID Mode] Enables RAID function for SATA storage devices.
f
sSATA Mode [AHCI Mode] (For SATA7~10)
Sets the operation mode of the onboard SATA controller.
[IDE] Specify the IDE mode for SATA storage devices.
[AHCI Mode] Specify the AHCI mode for SATA storage devices. AHCI (Advanced
Host Controller Interface) offers some advanced features to enhance the speed and performance of SATA storage device, such as Native
Command Queuing (NCQ) and hot-plugging.
f
SATAx Hot Plug [Disabled]
Allows user to enable or disable the SATA hot plug support.
[Enabled] Enables hot plug support for the SATA ports.
[Disabled] Disables hot plug support for the SATA ports.
f
HD Audio Controller [Enabled]
Enables or disables the onboard High Definition Audio controller.
f
HPET [Enabled]
Enables or disables the HPET (High Precision Event Timers) support.
f
USB Configuration
Sets the onboard USB controller and device function. Press Enter to enter the submenu. f
USB Controller [Enabled]
Enables or disables all USB controller.
f
XHCI Hand-off [Enabled]
Enables or disables XHCI hand-off support for the operating system without XHCI hand-off feature.
BIOS Setup
67
f
EHCI Hand-off [Enabled]
Enables or disables EHCI hand-off support for the operating system without EHCI hand-off feature. f
Legacy USB Support [Enabled]
Sets Legacy USB function support.
[Auto] The system will automatically detect if any USB device is connected and enable the legacy USB support.
[Enabled] Enable the USB support under legacy mode.
[Disabled] The USB devices will be unavailable under legacy mode.
f
Power Management Setup
Sets system Power Management of EuP2013 and AC Power Loss behaviors. Press
Enter to enter the sub-menu. f
EuP 2013 [Disabled]
Enables or disables the system power consumption according to EuP2013 regulation.
[Enabled] Optimize the system power consumption according to EuP 2013 regulation. It will not support S4 & S5 wake up by USB, PCI and PCIe devices.
[Disabled] Disables this function. f
Restore after AC Power Loss [Power Off]
Sets the system behaviors while encountering the AC power loss.
[Power Off] Leaves the system in power off state after restoring AC power.
[Power On] Boot up the system after restoring AC power.
[Last State] Restores the system to the previous state (power on/ power off) before AC power loss.
f
On board LED Control [On]
Enables or disables the actions of onboard LEDs.
[On]
[Off]
Enables the actions of onboard LEDs.
Disables the actions of power, reset, PCH, audio LEDs.
f
Windows OS Configuration
Sets Windows 8/ 8.1 detailed configuration and behaviors. Press <Enter> to enter the sub-menu. f
Windows 8.1/ 10 WHQL Support [Disabled]
Enables the supports for Windows 8.1/ 10 or disables for other operating systems.
Before enabling this item, make sure all installed devices & utilities (hardware & software) should meet the Windows 8.1/ 10 requirements.
[Enabled] The system will switch to UEFI mode to meet the Windows equirement.
[Disabled] Disables this function.
68
BIOS Setup
f
MSI Fast Boot [Disabled]
MSI Fast Boot is the fastest way to boot the system. It will disable more devices to speed up system boot time which is faster than the boot time of Fast Boot.
[Enabled] Enables the MSI Fast Boot function to speed up booting time. And the following Fast Boot field will be disabled and fixed.
[Disabled] Disables MSI Fast Boot. f
Fast Boot [Enabled/ windows 8.1/ 10, Disabled/ windows7]
Enables or disables the fast boot feature for Windows 8.1/ 10. This item will only be available when MSI Fast Boot is disabled.
[Enabled] Enables the Fast Boot configuration to accelerate system boot time.
[Disabled] Disables the Fast Boot configuration.
Important
If you want to enter BIOS with enabled MSI Fast Boot mode or enabled Fast Boot mode, you have to click the GO2BIOS tab on MSI Fast Boot utility screen or press the
GO2BIOS button (optional) on the motherboard. And then the system will enter to BIOS setup directly at next boot.
f
Wake Up Event Setup
Sets system wake up behaviors for different sleep modes. Press Enter to enter the sub-menu. f
Wake Up Event By [BIOS]
Selects the wake up event by BIOS or operating system.
[BIOS]
[OS]
Activates the following items, set wake up events of these items.
The wake up events will be defined by OS.
f
Resume By RTC Alarm [Disabled]
Disables or enables the system wake up by RTC Alarm.
[Enabled] Enables the system to boot up on a scheduled time/ date.
[Disabled] Disables this function.
f
Date (of month) Alarm/ Time (hh:mm:ss) Alarm
Sets RTC alarm date/ Time. If Resume By RTC Alarm is set to [Enabled], the system will automatically resume (boot up) on a specified date/hour/minute/second in these fields (using the + and - keys to select the date & time settings).
f
Resume By PCI-E Device [Disabled]
Enables or disables the wake up function of installed PCI-E expansion cards, integrated LAN controllers or USB devices which are supported by third party integrated chips.
[Enabled] Enables the system to be awakened from the power saving modes when activity or input signal of PCIe device is detected.
[Disabled] Disables this function.
BIOS Setup
69
f
Resume By Onboard LAN [Disabled]
Enables or disables the system wake up by Onboard Intel LAN.
[Enabled] Enables the system to be awakened from the power saving modes when activity or input signal of Intel LAN device is detected.
[Disabled] Disables this function.
f
Resume by USB Device [Disabled]
Enables or disables the system wake up by USB devices.
[Enabled] Enables the system to be awakened from sleep state when activity of
USB device is detected.
[Disabled] Disables this function.
f
Resume From S3/S4/S5 by PS/2 Mouse [Disabled]
Enables or disables the system wake up by PS/2 mouse.
[Enabled] Enables the system to be awakened from S3/ S4/ S5 state when activity of PS/2 mouse is detected.
[Disabled] Disables this function.
f
Resume From S3/S4/S5 by PS/2 Keyboard [Disabled]
Enables or disables the system wake up by PS/2 keyboard.
[Any Key] Enables the system to be awakened from S3/ S4/ S5 state when activity of any key on PS/2 keyboard is detected.
[Hot Key] Enables the system to be awakened from S3/ S4/ S5 state when activity of hot key on PS/2 keyboard is detected.
[Disabled] Disables this function.
f
Hot Key [Ctrl+Space]
Selects a combination of keys as a hot key to wake the system. This item appears when you set the Resume From S3/S4/S5 by PS/2 Keyboard to Hot Key.
f
Intel(R) Ethernet Connection I218-V-(MAC address)
Shows driver information and configures Ethernet controller parameter. Press
Enter to enter the sub-menu.
Boot
Sets the sequence of system boot devices.
f
Full Screen Logo Display [Enabled]
Enables or disables to show the full screen logo while system POST.
[Enabled] Shows the logo in full screen.
[Disabled] Shows the POST messages.
f
GO2BIOS [Disabled]
Allows system to enter BIOS setup directly by pressing the Power button for 4 sec upon bootup.
[Enabled] The system boots straight to the BIOS setup by long pressing the power button about 4 seconds when the system is off.
[Disabled] Disables this function.
70
BIOS Setup
f
Boot Mode Select [LEGACY+UEFI]
Sets the system boot mode from legacy or UEFI architecture depending on OS installation requirement. This item will become un-selectable and will be configured automatically by BIOS when Windows 8.1/ 10 WHQL Support is enabled.
[UEFI] Enables UEFI BIOS boot mode support only.
[LEGACY+UEFI] Enables both Legacy BIOS boot mode and UEFI BIOS boot
mode.
f
FIXED BOOT ORDER Priorities
Sets device priority for system boot.
f
Boot Option Priorities
These items are used to prioritize the installed boot devices.
Security
f
Administrator Password
Sets administrator password for system security. User has full rights to change the
BIOS items with administrator password. After setting the administrator password, the f
User Password
Sets User Password for system security. User has limited rights to change the BIOS items with user password. This item will be available when administrator password is f
Password Check [Setup]
Selects a condition that will request the password.
[Setup]
[Boot]
A password will be requested for entering the BIOS Setup.
A password will be requested for booting the system. f
Password Clear [Enabled]
Enables or disables the clear CMOS behavior to clear a set password.
[Enabled] The password will be erased after clear CMOS.
[Disabled] The password will always be kept.
Important
When selecting the Administrator / User Password items, a password box will appear on the screen. Type the password then press <Enter>. The password typed now will replace any previous set password from CMOS memory. You will be prompted to confirm the password. You may also press <Esc> to abort the selection.
To clear a set password, press <Enter> when you are prompted to enter a new password. A message will confirm the password is being disabled. Once the password is disabled, you can enter the setup and OS without authorization.
BIOS Setup
71
f
Chassis Intrusion Configuration
Press <Enter> to enter the sub-menu. f
Chassis Intrusion [Disabled]
Enables or disables recording messages when the chassis is opened. This function is ready for the chassis equips a chassis intrusion switch.
[Enabled] Once the chassis is opened, the system will record and issue a warning message.
[Reset] Clear the warning message. After clearing the message, please return to Enabled or Disabled.
[Disabled] Disables this funcion.
Save & Exit
f
Discard Changes and Exit
Exit BIOS setup without saving any change. f
Save Changes and Reboot
Save all changes and reboot the system. f
Save Changes
Save current changes.
f
Discard Changes
Discard all changes and restore to the previous values.
f
Restore Defaults
Restore or load all default values.
f
Boot Override
The installed bootable devices will appear on this menu, you can select one of them to be the boot device.
72
BIOS Setup
OC
Important
y
Overclocking your PC manually is only recommended for advanced users.
y
Overclocking is not guaranteed, and if done improperly, it could void your warranty or severely damage your hardware.
y
If you are unfamiliar with overclocking, we advise you to use GAME BOOST function for easy overclocking.
f
Simple/Advanced Mode [Advanced]
Enables or disables to show the simple or advanced version of OC settings.
[Simple] Provides the regular OC settings in BIOS setup.
[Advanced] Provides the advanced OC settings for OC expert to configure in BIOS setup.
Note: We use * as the symbol for the OC settings of Advanced mode.
f
Extreme OC Setup [Disabled]*
Sets the optimal BIOS setting for extreme overclocking.. [Options: Disabled, LN2
Extreme/ LN2 Normal] f
CPU Ratio Apply Mode [All Core]*
Sets applied mode for CPU ratio. This item only appears when a CPU that supports
Turbo Boost is installed.
[All Core] Activate the CPU Ratio field. All CPU cores will run the same CPU ratio that be set in CPU Ratio.
[Per Core] Activate the X-Core Ratio Limit field. Sets each CPU core ratio separately in X-Core Ratio Limit. f
CPU Ratio [Auto]
Sets the CPU ratio that is used to determine CPU clock speed. This item can only be changed if the processor supports this function.
f
Adjusted CPU Frequency
Shows the adjusted CPU frequency. Read-only.
BIOS Setup
73
f
CPU Ratio Offset When Running AVX [Auto]*
Sets a offset value to lower the CPU core ratio. It could be helpful for heat dissipation when running AVX instruction set. If set to Auto, BIOS will configure this setting automatically.
f
EIST [Enabled]*
Enables or disables the Enhanced Intel
®
SpeedStep Technology.
[Enabled] Enables the EIST to adjust CPU voltage and core frequency dynamically.
It can decrease average power consumption and average heat production.
[Disabled] Disables EIST.
f
Intel Turbo Boost [Enabled]*
Enables or disables the Intel
®
Turbo Boost. This item appears when the installed CPU supports this function.
[Enabled] Enables this function to boost CPU performance automatically above rated specifications when system request the highest performance state.
[Disabled] Disables this function.
f
Enhanced Turbo [Auto]
Enables or disables Enhanced Turbo function for all CPU cores to boost CPU performance.
[Auto]
[Enabled]
This setting will be configured automatically by BIOS.
All CPU cores would be increased to maximum turbo ratio.
[Disabled] Disables this function.
f
Game Boost Function Control [By onboard button]
Enables the GAME BOOST function by virtual button in BIOS or physical button on motherboard.
f
Ring Ratio [Auto]
Sets the ring ratio. The valid value range depends on the installed CPU. f
Adjusted Ring Frequency
Shows the adjusted Ring frequency. Read-only.
f
CPU Base Clock (MHz) [100]
Sets the CPU Base clock. You may overclock the CPU by adjusting this value. Please note that overclocking behavior and stability is not guaranteed. This item appears when the installed processor supports this function. f
CPU Base Clock Apply Mode [Auto]*
Sets the applying mode for adjusted CPU base clock.
[Auto] This setting will be configured automatically by BIOS.
[Next Boot] CPU will run the adjusted CPU base clock at next boot.
[Immediate] CPU runs the adjusted CPU base clock immediately.
[During Boot] CPU will run the adjusted CPU base clock during boot.
74
BIOS Setup
f
Filter PLL [Auto]
Enables or disables the filter PLL for CPU. This item appears when the installed CPU supports this function.
f
CPU PLL Trim Offset [Auto]
Sets a offset value to help the CPU stability when overclocking. The final result could vary with the CPU.
f
DRAM Reference Clock [Auto]*
Sets the DRAM reference clock. The valid value range depends on the installed CPU.
This item appears when a CPU that supports this adjustment is installed. f
DRAM Frequency [Auto]
Sets the DRAM frequency. Please note the overclocking behavior is not guaranteed.
f
Adjusted DRAM Frequency
Shows the adjusted DRAM frequency. Read-only. f
Extreme Memory Profile (X.M.P.) [Disabled]
X.M.P. (Extreme Memory Profile) is the overclocking technology by memory module.
This item will be available when the memory modules that support X.M.P. is installed.
[Disabled] Disables this function.
[Profile 1] Uses profile1 settings of XMP memory module.
[Profile 2] Uses profile2 settings of XMP memory module.
f
Load Memory Presets [Disabled]
Selects the preset memory overclocking parameters, that includes voltage and timing, by BIOS to optimize the installed memory performance.
Important
Manual tweaking or fine-tuning the memory parameters is preferred due to different memory module type and quality.
f
Memory Try It ! [Disabled]
It improve memory compatibility or performance by choosing optimized memory preset.
f
DRAM Timing Mode [Auto]
Selects the memory timing mode.
[Auto]
[Link]
[UnLink]
DRAM timings will be determined based on SPD (Serial Presence
Detect) of installed memory modules.
Allows user to configure the DRAM timing for all memory channel.
Allows user to configure the DRAM timing for respective memory channel. f
Advanced DRAM Configuration
Press Enter to enter the sub-menu. User can set the memory timing for each/ all memory channel. The system may become un-stable or un-bootable after changing memory timing. If it occurs, please clear the CMOS data and restore the default settings. (Refer to the Clear CMOS jumper/ button section to clear the CMOS data, and enter the BIOS to load the default settings.)
BIOS Setup
75
f
Memory Fast Boot [Auto]
Enables or disables the initiation and training for memory every booting.
[Auto] The setting will be configured automatically by BIOS.
[Enabled] System will completely keep the archives of first intiation and training for memory. So the memory will not be initialed and trained when booting to accelerate the system booting time.
[Disabled] The memory will be initialed and trained every booting. f
DigitALL Power
Press Enter to enter the sub-menu. Controls the digital powers related to CPU PWM.
f
VR 12VIN OCP Expander [Auto]
Expands the limitation of VR Over Current Protection with 12V input voltage. The higher expanding value indicates less protection. Therefore, please adjust the current carefully if needed, or it may damage the CPU/ VR MOS. If set to Auto,
BIOS will configure this setting automatically.
f
CPU Phase Control [Auto]
Controls PWM phase proportionally to the CPU loading. If set to Auto, BIOS will optimize the CPU PWM phase automatically.
[Auto] This setting will be configured automatically by BIOS.
[Normal] Sets the normal power phase profile for CPU, it could provide a stable system performance and effective power-saving capability.
[Optimized] Sets the optimum power phase profile for CPU, it could provide the system with an optimum power-saving capability.
[Disabled] Disables the PWM power phase switching feature. f
CPU Vdroop Offset Control [Auto]
Sets a percentage of offset voltage for CPU vdroop. If set to Auto, BIOS will configure this setting automatically.
f
CPU Over Voltage Protection [Auto]
Sets the voltage limit for CPU over-voltage protection. If set to Auto, BIOS will configure this setting automatically. Higher voltage provides less protection and may damage the system.
f
CPU Under Voltage Protection [Auto]
Sets the voltage limit for CPU under-voltage protection. If set to Auto, BIOS will configure this setting automatically. Higher voltage provides less protection and may damage the system. f
CPU Over Current Protection [Auto]
Sets the current limit for CPU over-current protection. If set to Auto, BIOS will configure this setting automatically. Higher values provides less protection and may damage the system.
f
CPU Switching Frequency [Auto]
Sets the PWM working speed to stabilize CPU Core voltage and minimize ripple range. Increasing the PWM working speed will cause higher temperature of
MOSFET. So please make sure a cooling solution is well-prepared for MOSFET before you increase the value. If set to Auto, BIOS will configure this setting automatically.
76
BIOS Setup
f
CPU VRM Over Temperature Protection [Enabled]
Enables or disables the CPU VRM over-temperature protection.
[Enabled] Sets the temperature limit on CPU VRM for over-temperature protection. The CPU frequency may be throttled when CPU temperature over the specified temperature.
[Disabled] Disables this function.
f
DRAM CH_A/B, CH_C/D Phase Control [Auto]
Controls PWM phase proportionally to the DRAM loading. If set to Auto, BIOS will optimize the DRAM PWM phase automatically.
[Auto] This setting will be configured automatically by BIOS.
[Optimized] Sets the optimum power phase profile.
[Disabled] Disables the PWM power phase switching feature. f
DRAM CH_A/B, CH_C/D Over Voltage Protection [Auto]
“Auto, BIOS will configure this setting automatically. Higher voltage provides less protection and may damage the system.
f
DRAM CH_A/B, CH_C/D Under Voltage Protection [Auto]
Sets the voltage limit for DRAM under-voltage protection. If set to Auto, BIOS will configure this setting automatically. Higher voltage provides less protection and may damage the system.
f
DRAM CH_A/B, CH_C/D Over Current Protection [Auto]
Sets the current limit for DRAM over-current protection.
[Auto] This setting will be configured automatically by BIOS.
[Enhanced] Extends the limitation of memory over-current protection.
f
DRAM CH_A/B, CH_C/D Switching Frequency [Auto]
Sets the PWM working speed to stabilize DRAM voltage and minimize ripple range.
If set to Auto, BIOS will configure this setting automatically.
f
DRAM CH_A/B, CH_C/D VRM Over Temperature Protection [Auto]
Sets the temperature limit on DRAM VRM for over-temperature protection. The
DRAM frequency may be throttled when DRAM VRM over the specified temperature.
If set to Auto, BIOS will configure this settings.
f
PCH Over Voltage Protection [Auto]
Sets the voltage limit for PCH over-voltage protection. If set to Auto, BIOS will configure this setting automatically. Higher voltage provides less protection and may damage the system.
f
PCH Under Voltage Protection [Auto]
Sets the voltage limit for PCH under-voltage protection. If set to Auto, BIOS will configure this setting automatically. Higher voltage provides less protection and may damage the system.
BIOS Setup
77
f
PCH Over Current Protection [Auto]
Sets the current limit for PCH over-current protection.
[Auto] This setting will be configured automatically by BIOS.
[Enhanced] Extends the limitation of PCH over-current protection.
f
PCH Switching Frequency [Auto]
Sets the PWM working speed to stabilize PCH voltage and minimize ripple range. If set to Auto, BIOS will configure this setting automatically.
f
PCH VRM Over Temperature Protection [Auto]
Sets the temperature limit on PCH VRM for over-temperature protection. The PCH frequency may be throttled when PCH VRM over the specified temperature. If set to
Auto, BIOS will configure this settings.
f
SVID Communication [Auto]*
Enables or disables SVID (Serial Voltage Identification) support.
[Auto] This setting will be configured automatically by BIOS.
[Enabled] PWM phase will be changed dynamically according to the CPU SVID
(Serial Voltage Identification).
[Disabled] Disables SVID (Serial Voltage Identification) support.
f
VCCIN Voltage [Auto]
Sets the CPU input voltage. The CPU input voltage is the CPU power source that is shared with components of the CPU.
f
CPU Voltages control [Auto]
These options allows you to set the voltages related to CPU. If set to Auto, BIOS will set these voltages automatically or you can set it manually. f
DRAM Voltages control [Auto]
These options allows you to set the voltages related to memory. If set to Auto, BIOS will set these voltages automatically or you can set it manually. f
PCH Voltages control [Auto]
These options allows you to set the voltages related to PCH. If set to Auto, BIOS will set these voltages automatically or you can set it manually.
f
CPU Memory Changed Detect [Enabled]*
Enables or disables the system to issue a warning message during boot when the CPU or memory has been replaced.
[Enabled] The system will issue a warning message during boot and than needs to load the default settings for new devices.
[Disabled] Disables this function and keeps the current BIOS settings.
f
CPU Specifications
Press Enter to enter the sub-menu. This sub-menu displays the information of installed CPU. You can also access this information menu at any time by pressing [F4].
Read only.
78
BIOS Setup
f
CPU Technology Support
Press Enter to enter the sub-menu. The sub-menu shows the key features of installed CPU. Read only.
f
MEMORY-Z
Press Enter to enter the sub-menu. This sub-menu displays all the settings and timings of installed memory. You can also access this information menu at any time by pressing [F5]. f
DIMMx Memory SPD
Press Enter to enter the sub-menu. The sub-menu displays the information of installed memory. Read only.
f
CPU Features
Press Enter to enter the sub-menu.
f
Hyper-Threading [Enabled]
Intel Hyper-Threading technology treats the multi cores inside the processor as multi logical processors that can execute instructions simultaneously. In this way, the system performance is highly improved. This item appears when the installed
CPU supports this technology.
[Enable] Enables Intel Hyper-Threading technology.
[Disabled] Disables this item if the system does not support HT function.
f
Active Processor Cores Control [Disabled]
Allows you to select the number of active CPU cores. f
Limit CPUID Maximum [Disabled]
Enables or disables the extended CPUID value.
[Enabled] BIOS limits the maximum CPUID input value to circumvent boot problems with older operating system that do not support the processor with extended CPUID value.
[Disabled] Use the actual maximum CPUID input value.
f
Execute Disable Bit [Enabled]
Intel ’s Execute Disable Bit functionality can prevent certain classes of malicious
buffer overflow attacks where worms attempt to execute code to damage the system. It is recommended that keeps this item enabled always.
[Enabled] Enables NO-Execution protection to prevent the malicious attacks and worms.
[Disabled] Disables this function.
f
Intel Virtualization Tech [Enabled]
Enables or disables Intel Virtualization technology.
[Enabled] Enables Intel Virtualization technology and allows a platform to run multiple operating systems in independent partitions. The system can function as multiple systems virtually.
[Disabled] Disables this function.
BIOS Setup
79
f
Intel VT-D Tech [Enabled]
Enables or disables Intel VT-D (Intel Virtualization for Directed I/O) technology. f
Hardware Prefetcher [Enabled]
Enables or disables the hardware prefetcher (MLC Streamer prefetcher).
[Enabled] Allows the hardware prefetcher to automatically pre-fetch data and instructions into L2 cache from memory for tuning the CPU performance.
[Disabled] Disables the hardware prefetcher.
f
Adjacent Cache Line Prefetch [Enabled]
Enables or disables the CPU hardware prefetcher (MLC Spatial prefetcher).
[Enabled] Enables adjacent cache line prefetching for reducing the cache latency time and tuning the performance to the specific application.
[Disabled] Enables the requested cache line only.
f
CPU AES Instructions [Enabled]
Enables or disables the CPU AES (Advanced Encryption Standard-New
Instructions) support. This item appears when a CPU supports this function.
f
Intel Adaptive Thermal Monitor [Enabled]
Enables or disables the Intel adaptive thermal monitor function to protect the CPU from overheating.
[Enabled] Throttles down the CPU core clock speed when the CPU is over the adaptive temperature.
[Disabled] Disables this function.
f
Intel C-State [Auto]
Enables or disables the Intel C-state. C-state is a processor power management technology defined by ACPI.
[Auto]
[Enabled]
This setting will be configured automatically by BIOS.
Detects the idle state of system and reduce CPU power consumption accordingly.
[Disabled] Disable this function.
f
C1E Support [Disabled]
Enables or disables the C1E function for power-saving in halt state. This item appears when Intel C-State is enabled.
[Enabled] Enables C1E function to reduce the CPU frequency and voltage for power-saving in halt state.
[Disabled] Disables this function.
f
Package C State limit [Auto]
This item allows you to select a CPU C-state level for power-saving when system is idle. The options of C-state depend on the installed CPU. This item appears when
Intel C-State is enabled.
80
BIOS Setup
f
CFG Lock [Enabled]
Lock or un-lock the MSR 0xE2[15], CFG lock bit.
[Enabled] Locks the CFG lock bit.
[Disabled] Un-locks the CFG lock bit. f
EIST [Disabled]
Enables or disables the Enhanced Intel
®
SpeedStep Technology. This item willappear when Simple/ Advanced Mode is set to Simple.
[Enabled] Enables the EIST to adjust CPU voltage and core frequency dynamically. It can decrease average power consumption and average heat production.
[Disabled] Disables EIST. f
Intel Turbo Boost [Disabled]
Enables or disables the Intel
®
Turbo Boost. This item is for Simple mode and appears when a CPU that support Turbo Boost is installed.
[Enabled] Enables this function to boost CPU performance automatically over specification when system request the highest performance state.
[Disabled] Disables this function.
f
Long Duration Power Limit (W) [Auto]
Sets the long duration TDP power limit for CPU in Turbo Boost mode.
f
Long Duration Maintained (s) [Auto]
Sets the maintaining time for Long duration power Limit(W). f
Short Duration Power Limit (W) [Auto]
Sets the short duration TDP power limit for CPU in Turbo Boost mode.
f
CPU Current Limit (A) [Auto]
Sets maximum current limit of CPU package in Turbo Boost mode. When the current is over the specified value, the CPU will automatically reduce the core frequency for reducing the current.
f
CPU Over Temperature Protection [Auto]
Sets the temperature limit on CPU for over-temperature protection. The CPU frequency may be throttled when CPU temperature over the specified value. If set to Auto, BIOS will configure this settings. The higher temperature indicates less protection. f
Internal VR OVP OCP Protection [Auto]
Enables or disables the over-voltage protection and over-current protection for
CPU internal VR (Voltage Regulator).
[Auto] This setting will be configured automatically by BIOS.
[Enabled] Enables the limitation of internal VR for over-voltage protection and over-current protection.
[Disabled] Disables this function for overclocking.
BIOS Setup
81
f
Internal VR OVP OCP Protection [Auto]
Enables or disables the over-voltage protection and over-current protection for
CPU internal VR (Voltage Regulator).
[Auto]
[Enabled]
This setting will be configured automatically by BIOS.
Enables the limitation of internal VR for over-voltage protection and over-current protection.
[Disabled] Disables this function for overclocking.
f
Internal VR Efficiency Management [Auto]
Enables or disables the CPU internal VR efficiency management.
[Auto] This setting will be configured automatically by BIOS.
[Enabled] Enables the VR effciency management for power-saving control.
[Disabled] Disables this function.
f
DMI Gen 2 [Auto]
Enables or disables DMI (Direct Media Interface) generation 2.
f
DMI De-emphasis Control [-6dB]
Sets the de-emphasis value to improve DMI margins. However, the default usually works best.
f
3DMark2001 XP Turbo [Disabled]
Enables or disables 3DMark2001. Enabling it could improve performance for
3DMark2001 in XP.
82
BIOS Setup
M-FLASH
M-FLASH provides the way to update BIOS with a USB flash drive. Please down-load the latest BIOS file that matches your motherboard model from MSI website, save the
BIOS file into your USB flash drive. And then follow the steps below to update BIOS.
1.
Insert the USB flash drive that contains the update file into the computer.
2.
Click on M-FLASH tab, a demand message will be prompted. Click on Yes to reboot and enter the flash mode.
3.
The system will enter the flash mode and a file selection menu will appear after rebooting.
4.
Select a BIOS file to perform the BIOS update process.
5.
After the flashing process is 100% completed, the system will reboot automatically.
BIOS Setup
83
OC PROFILE
f
Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6
Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6 management. Press <Enter> to enter the submenu.
f
Set Name for Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6
Name the current overclocking profile. f
Save Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6
Save the current overclocking profile.
f
Load Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6
Load the current overclocking profile.
f
Clear Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6
Clear the current overclocking profile.
f
OC Profile Load from ROM
Load OC profile from BIOS ROM.
f
OC Profile Save to USB
Save OC profile to the USB flash drive. The USB flash drive should be FAT/ FAT32 format only.
f
OC Profile Load from USB
Load OC profile from the USB flash drive. The USB flash drive should be FAT/ FAT32 format only.
84
BIOS Setup
HARDWARE MONITOR
Current Temperature & Speed information
Fan control field
Setting
Buttons
Voltage display f
Current Temperature & Speed information
Shows the current CPU temperature, system temperature and fans' speeds.
f
Fan control field
This motherboard provides a fan speed control feature call Smart Fan. Please check the Smart Fan Mode box to enable the Smart Fan. It automatically controls fan speed depending on the current CPU temperature and to keep it with a specific operating speed. When the current CPU temperature is over/ under the setting temperature, the CPU/ system fan will run at the corresponding speed. In this field, drag the color points to configure the fan speeds and the target temperatures of CPU for four level.
Important
The changing will achieve after you save the changes and reboot the system.
f
Function Buttons
[All Full Speed] Configures CPU and system fans to run at full operating speed.
[All Set Default] Configures CPU and system fans to run at default operating
speed.
[All Set Cancel] Discards current changes and restores previous operating speeds to CPU and system fans .
f
Voltage display
Shows the current voltages of CPU, system and memory.
BIOS Setup
85
Software Description
Installing Windows
®
7/ 8.1/ 10
1.
Power on the computer.
2.
Insert the Windows
®
7/ 8.1/ 10 disc into your optical drive.
3.
Press the Restart button on the computer case.
4.
Press F11 key during the computer POST (Power-On Self Test) to get into Boot
Menu.
Note: It is suggested to plug in your USB Keyboard/ USB Mouse to the leftmost
USB port when installing Windows
®
7.
5.
Select your optical drive from the Boot Menu.
6.
Press any key when screen shows Press any key to boot from CD or DVD... message.
7.
Follow the instructions on the screen to install Windows
®
7/ 8.1/ 10.
Installing Drivers
1.
Start up your computer in Windows
®
7/ 8.1/ 10.
2.
Insert MSI
®
Driver Disc into your optical drive.
3.
The installer will automatically appear and it will find and list all necessary drivers.
4.
Click Install button.
5.
The software installation will then be in progress, after it has finished it will prompt you to restart.
6.
Click OK button to finish.
7.
Restart your computer.
Installing Utilities
Before you install utilities, you must complete drivers installation.
1.
Insert MSI
®
Driver Disc into your optical drive.
2.
The installer will automatically appear.
3.
Click Utilities tab.
4.
Select the utilities you want to install.
5.
Click Install button.
6.
The utilities installation will then be in progress, after it has finished it will prompt you to restart.
7.
Click OK button to finish.
8.
Restart your computer.
86
Software Description
COMMAND CENTER
COMMAND CENTER is an user-friendly software and exclusively developed by MSI, helping users to adjust system settings and monitor status under OS. With the help of COMMAND CENTER, making it possible to achieve easier and efficient monitoring process and adjustments than that under BIOS. In addition, the COMMAND CENTER can be a server for mobile remote control application.
System Information CPU Temperature
Feature Menu
Profile
Buttons
Feature Title
Feature
Control Panel
Next Feature
Previous
Feature
Option Buttons
Page Indicator
Resize Corner
Profile Buttons
y
Default - load the default values for the current feature.
y
Apply - apply your changes.
y
Save - store values in the file with individual file extension.
y
Load - load the values from the file.
Important
Every time you shut down the system, the configured setting will be restored to the factory default. If you want to use the saved settings, you have to load it every time by clicking the Load and Apply buttons.
CPU Frequency
CPU Frequency control panel allows you to change
CPU Ratio and Base clock. You can see the current frequency of each CPU core on the top of the panel.
Software Description
87
CPU Fan
CPU Fan control panel provides Smart mode and
Manual Mode. You can switch the control mode by clicking the Smart Mode and Manual Mode buttons on the top of the CPU Fan control panel.
y
Manual Mode - allows you to manually control the
CPU fan speed by percentage.
y
Smart Mode - a linear fan speed control feature.
The control panel contains 4 dots allows you to drag and adjust the Smart Speed slopes. The fan speed will be changed along these lines with CPU temperature. The white dot will create strip chart in real time.
y
System Fan Button - to open the system fan control panel in new window.
y
Fan Tune Button - to automatically optimize the smart fan setting.
Manual Mode
Smart Mode
CPU Voltage
CPU Voltage control panel allows you to control the
CPU voltage.
DRAM Frequency & DRAM Voltage
y
DRAM Frequency - Shows the DRAM clock, ratio and frequency.
y
DRAM Voltage - Allows you to adjust the DRAM voltage. The risky values are displayed in red.
IGP Frequency & GT Voltage
y
IGP Frequency - Allows you to adjust the IGP ratio, and shows the IGP clock, ratio and frequency.
y
GT Voltage - Allows you to adjust the GT voltage.
The risky values are displayed in red.
88
Software Description
GAME BOOST
GAME BOOST has 8 overclocking stages for you to overclock your computer. COMMAND CENTER provides the software interface instead of GAME
BOOST knob on the motherboard. You can click on the center button to switch GAME BOOST control between software (SW) and hardware (HW) . The inner circle represents the current stage of hardware
GAME BOOST and the outer represents software.
Option Buttons - Advanced
When click the Advanced button, The Voltage, Fan and DRAM icons will appear. y
Voltage - allows you to adjust advanced voltage values of CPU and chipset.
y
Fan - allows you to control the system fans speed.
y
DRAM - shows the current Advanced DRAM parameters, and allows you to change the settings by selecting values from the drop-down menu on the right hand side.
y
Sensor - allows you to monitor your motherboard temperature and fan speed with the virtual thermal image. You can drag and drop the fan icons to new locations.
When you press the Cooling button, all fans will run at full speed.
Option Buttons - Setting
When click the Setting button, The Record, Warning and Mobile Control icons will appear. y
Record - allows you to monitor the status of voltage, fan speed and temperature in real time.
To filter record charts, select the check box next to the items.
When click the Play button, the chart pane will start to show the recording chart.
If you want to check the value of a specific spot on chart, please move the orange vertical line to the spot.
History Record stores the data and names with date and time.
To make a history record: Select items and click the Record button. When finished, click the Record button again. The data will be stored in the drop-down menu.
To load a record, click the drop-down menu and select one from the list.
To delete a record, select the record that you want to delete, and click the Trash
Can icon.
Software Description
89
y
Warning - contains fields of voltage, fan speed and temperature for you to set the threshold values. When system detects the status over your settings, a warning message will pop-up.
y
Mobile Control - is only available for the motherboard with the built-in WiFi module.
It allows you to enable/disable the COMMAND CENTER Remote Server. Please refer to the instruction on the Mobile Control control panel.
y
To start remote control: (optional)
1.
Download and install MSI
®
COMMAND CENTER APP to your mobile device.
2.
Enable COMMAND CENTER Remote Server on the Mobile Control panel.
3.
Enable SoftAP Management.
4.
Enter SSID and Password, and then click the Apply button.
5.
Activate Wi-Fi
®
on your mobile device and connect to SoftAP with the SSID.
6.
Run MSI
®
COMMAND CENTER APP on your mobile device.
7.
Find the IP address on the SoftAP Management Setting area, and enter the IP address on your MSI
®
COMMAND CENTER APP to link your system.
8.
Press Refresh on the MSI
®
COMMAND CENTER APP to verify that monitoring and
OC functions are working properly.
Option Buttons - Information
When click the Information button, The Motherboard, CPU, Memory and HW monitor icons will appear.
You can click the icons to open the related information.
Gadget Mode
COMMAND CENTER provides a gadget mode to monitor the system status. You can switch between gadget mode and full mode by clicking the arrow icon on the top left.
y
To arrange gadgets:
1.
Click the Spanner icon on the Gadget mode, a configuration panel will slide out.
2.
Select the check box next to the items.
3.
Click the Close button.
90
Software Description
LIVE UPDATE 6
LIVE UPDATE 6 is an application for the MSI
®
system to scan and download the latest drivers, BIOS and utilities. With LIVE UPDATE 6, you don ’t need to search the drivers on websites, and don ’t need to know the models of motherboard and graphics cards.
LIVE UPDATE 6 will download the appropriate drivers automatically.
Download Options
Download List
Scan / Download / Total
Installer button
System Information
Last Scanned Date
There are Live Update, History, Setting and System Information tabs at the top. You can click the tab to switch the control panel.
y
Live Update - When you launch LIVE UPDATE 6, you will see the Live update tab at first. This tab allows you to select files to download. You can also read the relevant information by clicking the information icon on the right of the item listed.
y
History - shows the downloading history.
y
Setting - allows you to specify the frequency that LIVE UPDATE 6 remind you to update.
y
System Information - displays the information of the system.
Updating The System
This section describes how to update your system with LIVE UPDATE 6. Please follow the steps below:
1
2
4
5
3
1.
Select the Live Update tab.
Software Description
91
2.
Choose Automatic scan, system will automatically scan all the items and search for the latest update files. Or you can choose Manual scan and select the items you wish to scan.
3.
Click the Scan button at the bottom. It may take several moments to complete the process.
4.
When the download list appears, please select the items you intend to update.
5.
Click Download button at the bottom.
6.
When Save Path prompt, you can specify a download directory.
7.
When downloading you will see the screen below. It may take several moments to complete the process.
8.
To install the applications, simply unpack the packages and install.
Total Installer
Total Installer is a convenient feature to simplify frequent installing procedure. To use
Total Installer:
2
3
1
1.
Scan updates in Live Update tab.
2.
Check the Select All check-box you intend to update.
3.
Click the Total Installer button. LIVE UPDATE 6 will automatically install them.
4.
When prompted, click OK to complete the Total Installer procedure
5.
Reboot your system.
92
Software Description
GAMING APP
GAMING APP is an application designed to quickly control your system for improving gaming performance.
Setting Button
Remote Control Setting
Information Button
Full Speed GPU Fan Gaming Function
Buttons
CPU Frequency
GPU Frequency
Control Mode Buttons
Peripheral Device
Function Buttons y
Setting Button - allows you to run GAMING APP when Windows starts.
y
Information Button - shows the information of this application.
y
CPU Frequency - shows the current CPU frequency.
y
Control Mode Buttons
OC Mode - enables Game Boost function to automatically overclock the CPU.
Gaming Mode - automatically optimize the CPU ratio and the GPU clock.
Silent Mode - reverts the CPU ratio and GPU clock to the default values.
y
Gaming Function Buttons - allows you to use LED Effect, OSD, Eye Rest and Dragon
Eye functions.
y
Peripheral Device Function Buttons - allows you to set the Gaming Hotkey, Mouse
Master and VR Ready functions.
y
Remote Control Setting - is only available for the motherboard with the built-in
WiFi module or with an external WiFi home router. It allows you to set up a set of
Name and Password to link the android device the motherboard. Please refer to the following instructions to complete the remote control setting.
1.
Download and install the MSI
®
GAMING APP APP to your android device.
2.
Set up a set of Name and the Password on the Remote Control Setting panel, and then click the Apply button.
3.
Activate Wi-Fi
®
on your android device and connect it to the wireless network of the motherboard.
4.
Run MSI
®
GAMING APP APP on your android device.
5.
Press the Remote Control Setting icon on the MSI
®
GAMING APP APP to find the paired device Name you set on the Remote Control Setting panel.
6.
Enter the Password you set on the Remote Control Setting panel.0
7.
Finally, you can use the MSI
®
GAMING APP APP to control the aspect of your motherboard with the android device.
Software Description
93
LED Effect
LED Effect allows you to control LED lights on your motherboard. y
All LED - controls all LEDs on your motherboard.
y
Each LED - separately controls each segment of LEDs on your motherboard.
MB Extend LED - controls the extended RGB LED strip. Please follows the steps to calibrate the RGB LED color.
1.
Click on the icon and a calibration pop-up window will show.
2.
Click on the arrow icon to go to next step.
3.
Click on the RED, GREEN and BLUE buttons separately to calibrate the LED red, green and blue colors.
4.
Click on the Finish to complete the RGB LED color calibration.
y
LED effects - switches LEDs on or off.
y
Styles - select the LED style from the drop-down list.
y
Music - flashes the LED light with music ’s beat. It will only function with the music output from analog audio ports.
y
LED color - allows you change the LED color.
y
Apply Button - applies LED Effect settings to LEDs.
Important
The Stack, Marquee, Meteor, Rainbow and Music light effects can only support to sync all LEDs effect. If you want to control each segment of LEDs, please set the other LED effects.
OSD Setting Panel
Use the OSD setting panel to specify information within on-screen display (OSD).
y
Apply Button - allows you to accept selections.
94
Software Description
DRAGON EYE
DRAGON EYE is an application allows you to watch a game guide, tutorial, live match or tournament stream while playing a game. In the game, you can use hotkeys to control / adjust the window of video.
On / Off Switch
Size Settings
Position Settings
Help
Transparency Settings
Video List
Hotkeys Information y
On / Off Switch - enables or disables Dragon Eye during your gaming sessions.
Switch it on before you launch the game in order to watch video while playing.
y
Video List - allows you to select the video you want to watch, and also add videos or channels to the list. You simply paste the URL of your video or stream into the input bar and hit the +. Then your video or stream will be in the list and you can select it to view it with Dragon Eye.
y
Size Settings - allows you to select the size of the Dragon Eye video content displayed on-screen when you ’re playing a game. There are three options available:
WQVGA (Small – 400 ×240)
HVGAW (Medium – 640 ×360)
WVGA (Large – 768 ×480) y
Position Settings - allows you to select where the Dragon Eye video needs to be displayed on screen. This way you can control where you want your video in-game, so you can place it on a place where no important game information is.
y
Help - If you want to watch the video tutorial for Dragon Eye or want to see if your game is supported, press this button and the help window will be shown. y
Transparency Settings - allows you to set the transparency of your Dragon Eye video.
0 = opaque | 100 = transparent.
y
Hotkeys Information - In this information screen you can find the hotkeys for
Dragon Eye. There are three hotkeys:
Alt+F9 - switches mouse focus between video window and game itself. (Direct interface to adjust progress bar, volume and other settings of video during the game)
Alt+F10 - turns on/off video window .
Alt+F11 - adjusts transparency of video clip.
NOTE: To customize hotkey, simply select the hotkey icon and then press the keys combination you want to use as a hotkey.
Software Description
95
Eye Rest
Eye Rest allows you to optimize the display on your monitor.
y
EyeRest - reduces blue-light of your LED backlit screen, in order to protect your eyes.
y
Gaming - automatically increase contrast ratio of your screen.
y
Movie - automatically increase dynamic contrast ratio of your screen.
y
Customize - allows you to adjust gamma, contrast and color balance for your screen.
y
Default - loads the default settings.
VR Ready
VR Ready can automatically detects VR devices connected to the system. When enabled, it can provide the right advice to make sure your system is VR Ready.
VR ON/ OFF
Applications y
VR ON/ OFF -enables or disables VR device support. y
Applications - appears when you turn on the VR support. It allows you to close some applications to optimize the system for better VR experience.
96
Software Description
Gaming Hotkey
Gaming Hotkey provides instant control of the system through user defined hotkeys.
Categories Toggle Gaming Hotkey ON/OFF
Hotkey Manager
Current Hotkeys y
Gaming Hotkey ON/OFF - allows you to turn ON/OFF the Gaming Hotkey function.
y
Categories Toggle - allows you to toggle over the Hotkey categories .
Windows Keys - allows you to define hotkeys to replace Windows default keyboard shortcuts.
Login Keys - provides hotkey login function.
MSI Smart Keys - allows you to define hotkeys for MSI Smart Keys.
y
Hotkey Manager - allows you to create, edit and delete hotkeys.
y
Current Hotkeys - shows all existing hotkeys.
Important
y
The Caps Lock, Num Lock, Scroll Lock, Window Home, Application and BackSpace keys can not be used as hot-keys.
y
Some key combinations are reserved for use by Microsoft Windows and can not be assigned as a hotkey.
Software Description
97
Mouse Master
Mouse Master provides mouse macro function. You can also use it to change DPI of your mouse.
Delay Time
Macro Hot Key
Mouse Action
Action List
DPI Setting
Default Button
DPI Hot Key
Test Area
Edit Buttons
Load Button
Save Button
Clear Button y
Delay Time - allows you to input delay time and click the Add button to insert a delay in the macro.
y
Macro Hot Key - allows you to assign a hotkey from A to Z to activate the macro.
y
Mouse Action - assigns mouse actions to the macro.
New - captures the mouse coordinate and add to the macro.
Left - add a left-click to the macro.
Middle - add a middle-click to the macro.
Left - add a left-click to the macro.
y
Action List - shows the actions of the current macro.
y
Edit Buttons - there 3 buttons for editing the macro.
Run - activates the macro.
Delete - removes the selected action from the macro.
Clear - removes all actions from the macro.
y
Load Button - allows you to load a macro.
y
Save Button - allows you to save the macro to a file.
y
DPI Setting - allows you select the mouse DPI from the drop-down menu.
y
Default Button - reverts to the default DPI setting.
y
DPI Hot Key - allows you to assign a hotkey from A to Z to activate the DPI setting.
Please note that you muse hold the hotkey to keep the DPI setting. When you release the hotkey, the DPI setting will be reverted to default.
y
Test Area - allows you to test the mouse movement.
y
Clear Button - clears the test area.
98
Software Description
M-CLOUD
M-CLOUD is an application of MSI network sharing. It allows you to turn your computer into Wi-Fi AP. It can also transfer files between your MSI computers.
Soft AP
ON/OFF
Server
Information
History
Users &
Permissions
Local
Directory
Server
Directory
File Transfer y
Soft AP ON/OFF - click on the Soft AP ON/OFF button to enable virtual Wi-Fi AP.
y
Server Information - indicate information of current server connection. y
History - click on the History button to view file transfer history.
y
Users & Permissions - click on the Users & Permissions button to open the Users
& Permissions Management window.
y
Local/ Server Directory - you can upload or download files between the local and the server. There 5 icons on the toolbar at the top of Local/ Server Directory.
Refresh - refresh the local/ server directory.
Delete - you needs delete permission to delete files.
Root Folder- navigate to root folder.
Up a Level - navigate up one directory level.
New Folder - you needs delete permission to create a new folder.
y
File Transfer - click > button to upload files from the local to the server. Click < button to download files from the server to the local.
Software Description
99
Setting up Soft AP (optional)
The Soft AP function is only available for the motherboard with the built-in WiFi module. You can share your network connection to your smartphones, tablets and laptops with the Soft AP function.
Important
y
You must have an active network connection and an installed Wi-Fi moudle to enable Soft AP.
y
If you connect to Internet by using PPPoE, you should check Allow other people to
use this connection when set up a new connection.
To use Soft AP:
1
2
3
4
1.
Click the Soft AP button to ON and the Soft AP dialogue will pop up.
2.
Select an existing network connection.
3.
Fill in Wi-Fi network name (SSID) and network password.
4.
Click Apply button to complete.
Installing Cloud Storage
M-CLOUD needs a connection to Google Drive or Dropbox in order to detect your available servers.
Cloud Storage
Server Detection
File Transfer
If you haven ’t installed either Google Drive or Dropbox software yet, you can download and install it from below web address, and please follow the direction on the web page.
Google Drive: https://www.google.com/drive/download/
Dropbox: https://www.dropbox.com/downloading/
100
Software Description
Managing User Accounts
This section describes how to create/ remove a user account and configure individual access permissions.
2
1
5
3
4
1.
Click the Users & Permissions button and the Users & Permissions Management window will pop up.
2.
Click Add Account button create a new user account.
3.
Fill in user
’s ID, password and Confirm Password fields.
4.
Select permission for the user account.
5.
Click Apply button to complete.
Once you create an account 3 management icons will appear on the right hand side.
Delete - delete the user account.
/ Unlock/ Lock - unlock/ lock the user account.
Edit - change the user password and permission.
Transferring Files
This section describes how to transfer files between your local computer and a server.
Important
y
Before using the M-CLOUD to transfer files, you need to connect both the local computer and the server to either Google Drive or Dropbox properly with the same user account.
y
To allow your computers to communicate through the firewall with M-CLOUD, you have to open ports 24680~24780.
1.
Activate M-CLOUD both on the local computer and the server.
2.
Select a server from the bar
3.
Enter User ID and Password and click the Login button.
4.
You can select files from Local/ Server Directory and then click the File Transfer button to upload or download them. You can also drag the files from one side and drop them on the other side.
Software Description
101
RAMDISK
RAMDISK creates a virtual RAM drive using the available memory in your computer, the performance of the RAMDISK is faster than an SSD and hard drive. RAMDISK allows you to store any temporary information on it. Furthermore, using the RAMDISK will extend your SSD ’s life by sparing it from excessive reading and writing.
Creating a RAM Disk
When RAMDISK is started, it will create a default RAM disk. If you want to change settings, refer to following instructions.
Setting
Backup
Option
Apply
Button
Management y
Setting - specify Letter, Name, Size and Format of the RAM disk.
y
Option - select browser temporary files to save/load on the RAM disk. You can also add software files to improve reading speed.
y
Backup - specify backup and restore settings to prevent data loss. All files will be lost each time the RAMDISK is stopped if you do not backup.
Browse Button - set the path to the image file.
Backup Right Now Button - manually backup files.
Restore On Boot - check this box to have the image file loaded automatically when
RAMDISK starts.
Auto Backup - check this box to backup automatically over a period of time. y
Apply Button - allows you to apply changes.
y
Management - shows RAMDISK information and allows you to delete files.
Remove the RAM disk
Dislpay information
Delete files in the RAM disk.
102
Software Description
USB SPEED UP
Enabling USB SPEED UP can speed up the date transfer rates of the USB storage devices.
Setting
On/ Off button
Display y
Setting - enables or disables Run USB SPEED UP when windows starts.
Default setting is enabled y
On/ Off button - switches the USB SPEED UP on or off.
y
Display - displays the information and current transfer rates of USB storage devices.
Important
The improved transfer rate will vary with the USB storage devices.
Software Description
103
GAMING LAN MANAGER
GAMING LAN MANAGER is an utility for traffic shaping for the Windows 7/ 8.1/ 10.
It can keep your internet fast during heavy upload/ download and improve your ping for online games. If your motherboard has a Wi-Fi module, GAMING LAN MANAGER provides virtual access point function for traffic shaping for your mobile devices.
y
Applications - displays currently using network bandwidth applications. You can prioritize Games, Medias or File sharing programs as high as possible.
y
Performance - shows top 5 applications by total traffic, allows you to monitor network bandwidth usage.
y
Network Test - allows you to setup bandwidth control.
y
Advanced Setting - allows you to expand RWIN to accelerate download speed. You can also block IP address and setup virtual access point.
y
Information - shows version information.
Configuring Bandwidth
This section describes how to configure Internet Provider Speed. You can configure default internet upload and download bandwidth from the Network Test tab on the
GAMING LAN MANAGER window.
Important
Before using the GAMING LAN MANAGER for the first time, you should use the
Test Network Speed button which runs a speed test of your current total Internet bandwidth delivered through your Internet service provider.
104
Software Description
Speed Testing
The speed testing is used to optimize bandwidth usage. To test the Upload and Download speed, please follow the steps below:
1
1.
Click the Network Test block in GAMING LAN MANAGER.
3
4
2
2.
Click Test Network Speed button. The test takes several minutes to test your network speed.
3.
Enter the testing results into Upload Speed and Download Speed fields.
4.
Check the Enable Bandwidth Control to allow the GAMING LAN MANAGER to manage the bandwidth.
Software Description
105
Nahimic 2
Nahimic 2 is designed to offer the best audio experience it contains 6 audio effects, 3 microphone effects, HD Audio Recorder2 and Sound Tracker.
Installation and Update
Nahimic 2 is included in the audio driver. If you need to install it or update it, please use the Driver Disc with your motherboard or download the driver from MSI ’s official website.
Audio Tab
From this tab, you can access all of Nahimic 2 ’s audio effects, audio profiles and settings.
Device properties
Display &
Volume
Profiles
Audio Effects
EQ Profile
Page
Mute
Reset Button
On/Off Button y
Display & Volume - displays the type of audio rendering device currently being used as output, as well as its current volume.
Mute - mutes the current audio output device.
Device properties - allows you to change the format, sample rate, bit rate and the channel gain of the current device (if these options are available for the current device). Clicks on this button and a device properties panel will show. y
Profiles - allows you to adjust the 6 audio effects to your current listening experience.
Gaming - allows you to choose an audio profile to fit your gaming experience.
Multimedia - allows you to choose an audio profile to fit your everyday experience.
y
Audio Effects - allows you to separately control any of the 6 audio effects.
Bass Boost - increases the energy in low frequencies up to +12 dB.
Virtual Surround
Gaming and Movies - virtualizes the multichannel audio stream and downmixes it in order to retrieve a multichannel listening experience over your stereo headphones or speakers.
Music - expands the stereo for a wider sound stage.
Reverb - increases the feeling of space by applying different types of reverbs corresponding to different room sizes.
Treble Enhancer - Increases the energy in high frequencies up to +12 dB.
106
Software Description
Smart Loudness - maintains a constant volume for all elements of the audio experience to making them all sound softer, balanced or louder.
Voice Clarity - boosts the speech in movies, video games and incoming communication from +0 through +12 dB (0 to 100%).
y
Reset Button - restores the current profile to its default values. y
On/Off Button - allows you to turn on and off all Nahimic 2 ’s effects in one click.
y
EQ Profile Page - by clicking the arrow button, you can also access a second page that contains the x10 bands EQ and EQ profiles.
EQ Profiles
Custom EQ
Profile x10 bands EQ
EQ Profiles - allows you to choose between 6 EQ profiles to fit your audio experience
Custom EQ Profile - you can change the x10 bands of the Custom EQ profile so as to make it fit your current needs.
x10 bands EQ - x10 bands EQ, from 32Hz to 16KHz.
Microphone Tab
From this tab, you can access all of Nahimic 2 ’s microphone effects and settings.
Microphone
Loopback
Device properties
Display &
Volume
Microphone
Effects
Mute y
Display & Volume - displays the type of audio recording device currently being used as input, as well as its current volume.
Mute - mutes the current device.
Software Description
107
Device properties - allows you to boost the volume and modify the left/ right balance of microphone. Clicks on this button and a device properties panel will show. y
Microphone Loopback - turns the microphone loopback On/Off. In order to avoid any feedback (Larsen effect).
y
Microphone Effects - allows you to separately control any of the 3 microphone effects.
Voice Shaper - applies a filter to the voice.
Voice Leveler - levels the volume of your voice in order to avoid any saturation and maintains a constant and clear communication. Voice Leveler can be adjusted with a 0 to 100% slider.
Noise Reduction - removes the remaining sound that the Noise Gate has left on top of your words and sentences.
HD Audio Recorder 2
From this tab, you can access the audio launchpad and HD Audio Recorder 2 settings.
Audio
Launchpad effects
Pad
Properties
Control page y
Audio Launchpad effects - allows streamers to use prerecorded sounds during a livestream. These sounds can also be heard by viewers. This tool will allow you to create your true audio identity. That way, your livestreams will be more personal and animated. The Audio Launchpad is one of the fresh new features of Nahimic 2. As it ’s a feature designed for broadcasters, we included it in the HD Audio Recorder 2 page.
Pad Properties - every pad can be customized by clicking the properties button that will appear in its bottom right when hovering over it with your mouse.
On the Pad Properties panel you can choose:
The sound assigned to each pad.
The keyboard hotkey assigned to each pad.
The color assigned to each pad.
Config 1, 2 & 3 - allows you to prepare 3 completely different configurations so as to adapt the Launchpad to the content you are streaming. Each configuration has 6 customizable pads. The 3 configurations are independent, meaning Config 1 cannot be used at the same time than Config 3.
108
Software Description
y
Control Page - by clicking the arrow button, you can access the control page.
Audio Launchpad ON/OFF - switches the Audio Launchpad on or off.
HD Audio Recorder 2 - The HD Audio Recorder 2 is, by default, automatically launched when a XSplit Gamecaster 2 recording session is detected. The launch of the HD Audio Recorder 2 enables HD audio processing over an XSplit Gamecaster
2 recording without any need for adjustments. The HD Audio Recorder supports
XSplit Gamecaster 2.
Pop-up message ON/OFF - switches the pop-up message on or off.
Sound Tracker
The Sound Tracker is an FPS oriented feature that provides a visual indication localizing the source of the strongest sound while in a game. The Sound Tracker captions the 5.1 and 7.1 sound streams processed by your audio system, and is displayed in all applications and games using DirectX 9, 9c, 10 and 11. Please remember Sound Tracker is only available if you are using an audio device that supports Nahimic 2 effects.
Sound
Tracker
Effects
ON / OFF button and hotkey - switches the Sound Tracker on or off.
Hotkey - use the CTRL + SHIFT + S to turn ON / OFF the Sound Tracker.
7.1 Audio Test - launch a 7.1 audio sample allowing you to preview how the radar will react in your game.
Transparency - allows you to adjust the transparency of the Sound Tracker, making it look more or less discrete.
Scale - allows you to adjust the scale of the Sound Tracker, making it look bigger or smaller.
Software Description
109
XSplit Gamecaster V2
XSplit Gamecaster is the newest product from SplitmediaLabs, the creators of XSplit
Broadcaster, the world ’s most popular streaming application.
XSplit Gamecaster was designed to provide gamers with the simplest and most uncomplicated way to create high quality gameplay recordings and live streams. By utilizing the revolutionary in-game overlay, streamlined encoding, and social network features, you ’ll be sharing your gameplay to your family, friends, and followers in no time!
System Requirement
y
Hardware specifications:
For HD 720p Recording/Streaming - Core i5 CPU or equivalent
For HD 1080p Recording/Streaming - Core i7 CPU or equivalent
4 GB RAM minimum
8 GB free hard disk space
GeForce/Radeon Class Graphics card, minimum Direct X hardware level 10.1
y
Software specifications:
Windows
®
7 SP1/ 8.1/ 10 (32bit/ 64bit)
.NET Framework 3.5
DirectX 10.1 or better
Logging
After installing and activating XSplit Gamecaster V2, it will display a login dialogue. If you already have an account and password, fill your email and password into the form and click the Login button.
Important
When starting XSplit Gamecaster V2 on select MSI machines that contain select MSI
®
®
gaming laptops, all-in ones or on
motherboards or graphics cards, you will receive a free 6 month XSplit premium license that you can apply to an existing free account or to a new account. If you already have an XSplit account with a personal or premium license, then you can instead add 6 months to your license duration.
Registering an Account
If you don
’t have an XSplit account yet, click “Register now” on the login dialogue.
When the user registration form appears, complete all the fields.
110
Software Description
Learning stream and record
Refer to the Start page of XSplit Gamecaster V2 to learn how to stream and record your gameplay.
Tool Tip
When you click the question mark next to a feature name on the panel, a tooltip will show, describing the particular function of that item.
Question mark
Inside the XSplit Gamecaster Overlay
1.
Streaming/Recording Buttons - Press Stream to start live streaming or Record to start recording.
2.
Microphone/System Sound Control - Pressing the microphone or system sound button will enable or disable the microphone or system sound.
3.
Webcam Controls - To enable webcam controls, you must first select a camera/ webcam in the Settings Tab. Once you have selected a webcam, you can activate it by clicking on its icon in the XSplit Gamecaster V2 overlay.
4.
Twitch Chat Controls - If you ’ve signed in to your Twitch.tv account, you’ll see a
Twitch icon in the overlay. When you click on this icon, a window will open. This window is XSplit Gamecaster ’s integrated chat system.
Software Description
111
5.
Share Button - If you authorize your Facebook, Twitter, and/or Google+ accounts, you can quickly share your stream URL and status update within the overlay.
6.
Annotations - This feature of XSplit Gamecaster V2 allows you to draw directly onto your game play. You can activate annotation mode by clicking on the pencil button in the overlay.
Accounts Tab
y
Live Streaming Services - allows you to stream to a variety of live streaming services such as YouTube, Twitch, Ustream, Dailymotion, Niconico and also allows for custom RTMP streaming.
y
Video Sharing Services - allows you to directly upload recordings to YouTube from within the software.
y
Social Network Services - allows you to share your live stream or YouTube links to friends & followers on Google+, Facebook, and Twitter. To allow XSplit Gamecaster to post on your desired social network, click on the Authorize To Post On... button of your desired social network and enter your username and password to authorize.
Settings Tab
y
Stream Settings - The default setting is Automatic mode. In Automatic mode, your stream settings are automatically determined by XSplit Gamecaster based on your computer and internet resources (this includes resolution, bitrate, codec, but frame is always set to 30). You can change to a different resolution by clicking on the dropdown arrow.
y
Record Settings - The default setting for recording is Original Resolution. This refers to the resolution of the game that ’s been set inside the game’s video/ graphics settings. You can change to a different resolution by clicking on the dropdown arrow.
112
Software Description
y
Microphone Settings - In this region, you can select your desired microphone. What is shown in the list depends on what you have connected to your PC. If you don ’t see your desired device in the list, please make sure that it is detected and it is not disabled in your recording devices list in the Windows
®
Sound Menu (Start > Control
Panel > Sound > Recording).
y
Camera Settings - In this region, you can select your desired camera. What is shown in the list depends on the cameras you have connected to your PC (Control Panel >
Device Manager > Imaging Devices).
y
BRB Graphics (Be-Right-Back Graphics) - BRB Graphics are activated when you alt-tab or minimize your game. BRB Graphics will not work in Console Viewer mode.
You can enter the BRB Graphics editor by clicking on the gear icon next to the BRB
Graphics preview.
Hotkeys Tab
y
Setting and Deleting Hotkeys - You can use virtually any keyboard key as a hot key along with using Ctrl, Shift, and Alt as modifiers for hot keys. To set a hotkey, click on the function you wish to set (e.g. Stream, Record, etc.) and hen press the key(s) you wish to use as its hot key(s).
To remove a hot key, click on the function and press Delete or click on the X symbol at the end of the box of the hot key.
Important
You cannot use the following keys individually because they are used for creating annotations: C, S, T, Del and Esc.
Recordings Tab
y
Arranging Recordings - In the Recordings Tab, you can view your recordings as thumbnails or in a listed format by clicking on the button in the top right corner of the window. You can sort your recordings by name, date, length, and size by right clicking in the Recordings Tab.
y
Opening Recordings Folder - To open your recordings folder in Windows
® click on Open Folder.
Explorer, y
Changing Recordings Location - To change the location of where your videos will be saved, click on the recordings folder location.
y
Uploading video recordings to YouTube - To upload to YouTube, you must first authorize your account in the Accounts Tab. After you have authorized your account, click on a recording and then click on the YouTube logo in the bottom right corner. A window will open and you will be able to fill out the title, description, category, tags, privacy, and you will be able to choose to allow or disallow embedding. Once you have entered the details for YouTube, press the Upload Now button.
y
Sharing on Social Media - Once a video has been uploaded, you can share the
YouTube link on any social media accounts you have connected to XSplit Gamecaster.
Simply click on the icon of the social media site you wish to share, and a window will appear where you can enter some details about your post before publishing your link. When you are done entering the details of your post, click Share Video to post it to your selected social media account.
Software Description
113
Intel
®
Extreme Tuning Utility
Intel
®
Extreme Tuning Utility (Intel XTU) is a simple overclocking software for you to tune, test and monitor your system.
Tuning Controls
Views
Settings
Help
Navigation
System
Table
System
Monitors
System
Graphs y
Views Settings Help
Views - toggles to switche between Monitoring and Show All view.
Settings - opens the General Settings window.
Help - displays the help content for Intel XTU in a separate window.
y
Navigation - lists all of the major functions of Intel XTU.
System Information - shows the details about your system.
App-Profile Pairing - tunes automatically based on active application.
Manual Tuning - changes system settings in a free form.
Stress Test - tests the stability of your system.
Benchmarking - analyzes and compares your system ’s performance against other system profiles.
Profiles - manages sets of system settings.
y
Tuning Controls - displays the controls for changing the system settings in manual tuning. For stress tests and profiles, this area displays the settings for these features.
y
System Table - displays information about the current system settings and a summary of your changes.
y
System Graphs - shows measured system values over a period of time. The system graphs update live as changes are detected in the system. You can customize the system graphs to show the data you need for your overclocking strategy in the system graphs preferences.
y
System Monitors - shows the range of the value, averages, and the current value.
The monitors change color if the monitored values fall into warning or critical zones.
114
Software Description
SteelSeries Engine 3
SteelSeries Engine 3 is a unified platform built to support all of SteelSeries products.
It can deploy your saved device settings automatically when switching between your favorite games or applications.
After installation the SteelSeries Engine background processes will start and the interface will open automatically.
My Gear
Device Cards
Library
Application
Configuration y
My Gear - all of your SteelSeries devices in one place.
Device Cards - all of your SteelSeries devices are easily accessible from the My
Gear tab, regardless of type, connection status, or which applications they are assigned to.
y
Library - quickly set up your configurations to autolaunch with an application.
Application Configuration - you can choose to have configurations deploy automatically whenever you use a specific game or application. Add any number of applications to your library and SteelSeries Engine 3 will seamlessly change the configurations of your devices as you switch between them.
Configuration Windows
Configuration Windows are unique to their devices and each of them includes a collapsible Configuration List Panel of all the configurations for that device. You can create a new configuration by selecting the New button at the bottom of the
Configuration List Panel.
Configuration
Windows
Software Description
115
Configuring Your Devices
You can custom configurations for SteelSeries devices in their Configuration Windows.
The top left displays the name of the configuration you are viewing, the body features widgets for customizing various functions of the device, and at the bottom are Save/
Revert buttons, a Live Preview toggle, and a button to open/close the collapsible
Configuration List Panel.
Widgets Widgets Toggle Widgets
Configuration Windows Toggle Live Preview Revert/ Save Button y
Widgets - allow you to customize a certain aspect of your device. y
Widgets Toggle - allows you to toggle Widgets .
y
Configuration Windows Toggle - allows you to toggle the Configuration Windows.
y
Live Preview - gives you the full experience of your configuration
’s look, feel, and sound while you are editing it.
y
Revert/ Save Button - configuration changes are not written to the database until you select Save. This gives you freedom to experiment, knowing that you can select
Revert to undo changes.
Tool Tip
When you click the question mark next to a feature name on the panel, a tooltip will show, describing the particular function of that item.
Question Mark
116
Software Description
CPU-Z
CPU-Z is an utility that gathers information on some of the main devices of your system.
y
CPU Tab - shows processor name, code name, package, specification, instructions sets, core speed and cache levels.
y
Caches Tab - shows extended information related to the cache capabilities.
y
Mainboard Tab - shows motherboard manufacturer, model name, chipset, BIOS version and graphic interface.
y
Memory Tab - shows memory type, memory size, channels, memory frequency.
y
SPD Tab - shows specifications relating to each memory module connected to the motherboard, including the size, type and frequency.
y
Graphics Tab - shows GPU name, code name, core speed, memory size, and memory type.
y
Bench Tab - allows you to run either a benchmark or a stress test on your processor.
y
About Tab - shows the CPU-Z version, Windows version, DirectX version and allows you to save the report file.
Software Description
117
Intel
®
Turbo Boost Max Technology 3.0 Application / Driver
Processors containing the Intel
®
Turbo Boost Max Technology 3.0 feature have at least one processor core whose maximum turbo frequency is higher than the other cores. To realize the higher performance benefit of such a processor core, targeted applications must run on that core.
The Intel
®
Turbo Boost Max Technology 3.0 Application / Driver directs targeted application software to run on the higher performance processor cores as configured by the user.
After installation, the Intel
®
Turbo Boost Max Technology 3.0 Application / Driver automatically loads when the system starts.
Enable
Foreground App
Has Priority
Turbo Boost Max
Applications
Advanced
Settings
Core List
Profile
Apply & Cancel y
Enable - allows you to enable Intel
®
Turbo Boost Max Technology 3.0 by checking the box. When the box is un-checked, the software returns the system to normal OS operation, which may not provide the best performance.
Important
In some cases, external software may cause the Intel
®
Turbo Boost Max Technology
3.0 Application / Driver to become disabled. In this case, the application displays
(External Control Active) to the right of the Enable control. Note that this may occur even when you have checked the Enable check box.
y
Foreground App Has Priority - When the box is checked, the in-focus application becomes a targeted application and priority is given to it for placement of its demanding work on processor cores in the Core List over any other targeted applications in the Turbo Boost Max Applications list. When the box is unchecked, priority is given to targeted applications in the Turbo Boost Max Applications list in list order.
y
Turbo Boost Max Applications - The list is in priority order with the top priority targeted application at the top of the list. The Add App control can be used to browse and select targeted applications to be added to the list. The list order can be changed by right clicking on a targeted application name and selecting a control from the displayed dialog box. Select Move Up to move the targeted application towards the top of the list or Move Down to move the targeted application towards the bottom of the list. Select Delete to delete the list entry.
118
Software Description
y
Core List - is an ordered list of the processor cores with the highest performance core at the top. Adjacent list entries may represent cores with equivalent performance. The core numbering scheme is consistent with the operating system ’s core numbering scheme. For example, Core 0 corresponds to logical processors 0 & 1, Core 1 corresponds to logical processors 2 & 3, etc.
Note: When per core maximum ratio over clocking is occurring, Overclocking
Enabled! is displayed to the right of Core List.
y
Profile - allows you to save the settings. The + and - buttons can be used to add and remove profiles. Profiles may be saved by selecting the Apply button.
y
Apply & Cancel - To save the change select the Apply control. To cancel changes, select the Cancel control.
y
Advanced Settings - contains a small number of controls that are described below:
Evaluation Interval - controls how often the Intel
®
Turbo Boost Max Technology
3.0 Application / Driver looks for demanding work. The interval is specified in 100 millisecond units and the Intel default value is 10 (once per second).
Utilization Threshold % - Demanding work is work whose percent processor utilization over the period specified by Evaluation Interval exceeds a threshold specified by this advanced setting (Intel default = 90%)
Affinity Controls - button selection is one of:
Affinitize To All Cores - specify whether the Intel
®
Turbo Boost Max Technology
3.0 Application / Driver places demanding work in priority order on all cores in the core list.
Affinitize Only To Cores With Diversity - only places demanding work on higher performance cores, which results in OS scheduler policy placing work on the residual cores.
Software Description
119
RAID Configuration
Below are the different types of a RAID.
RAID 0 breaks the data into blocks which are written to separate hard drives.
Spreading the hard drive I/O load across independent channels greatly improves I/O performance.
RAID 1 provides data redundancy by mirroring data between the hard drives and provides enhanced read performance.
RAID 5 provides data striping at the byte level and also stripe error correction information. This results in excellent performance and good fault tolerance.
RAID 10 uses four hard drives to create a combination of RAID 0 and 1 by forming a
RAID 0 array from two RAID 1 arrays.
RAID level comparison
RAID 0
Minimum # drives 2
Data protection None
Read performance Excellent
Write performance Excellent
Capacity utilization 100%
RAID 1
2
Excellent
OK
Good
50%
RAID 5 RAID 10
3
Excellent
4
Excellent
Good
OK
OK
Good
67%~(1-1/n) 50%
Using Intel
®
Rapid Storage Technology Option ROM
First, you need to set the SATA mode to RAID in BIOS to create, delete and reset RAID volumes. To enter the IRST Option ROM, reboot and press Ctrl + I keys to enter the
IRST Option ROM during the POST, the following window will appear.
1. Create RAID Volume 4. Recovery Volume Options
2. Delete RAID Volume
3. Reset Disks to Non-RAID
5. Acceleration Options
6. Exit
[ ]
RAID Volumes :
None defined.
Physical Devices :
Port Device Model Serial # Size Type/Status (Vol ID)
1 XXXX-XXXXXXXX XXXXXXXXXXXXXX XXX.XGB
Non-RAID Disk
2 XXXX-XXXXXXXX XXXXXXXXXXXXXX XXX.XGB
Non-RAID Disk
[ ↑↓] - Select [ESC] - Exit [ENTER] - Select Menu
Important
The following procedure is only available with a newly-built system or if you are reinstalling your OS. It should not be used to migrate an existing system to RAID.
120
RAID Configuration
Creating RAID Volume
1.
Select option Create RAID Volume and press Enter key. The following screen appears.
Name :
RAID Level :
Disks :
Strip Size :
Capacity :
Sync :
Volume0
RAID1(Mirror)
Select Disks
N / A
XXX.X GB
N / A
Create Volume
RAID 1 : Mirrors data (redundancy) .
[ ↑↓] - Change [TAB] - Next [ESC] - Previous Menu [ENTER] - Select
2.
Specify a RAID Volume name and then press the Tab or Enter key to go to the next field
3.
Use the ↑↓←→ arrow keys to select the RAID level best suited to your usage model in RAID Level.
4.
In the Disk field, press Enter key and use Space key to select the disks you want to create for the RAID volume, then click Enter key to finish selection. This field will become available according to the selected RAID level.
5.
Select the strip size for the RAID array by using the ↑ upper arrow or ↓ down
arrow keys to scroll through the available values, and pressing the Enter key to select and advance to the next field. The available values range from 4KB to
128 KB in power of 2 increments. The strip size should be chosen based on the planned drive usage. Here are some typical values:
RAID0 -128KB / RAID10 - 64KB / RAID5 - 64KB.
6.
Select the capacity of the volume in the Capacity field. The default value is the maximum volume capacity of the selected disks.
Important
Since you want to create two volumes, this default size (maximum) needs to be reduced. Type in a new size for the first volume. As an example: if you want the first volume to span the first half of the two disks, re-type the size to be half of what is shown by default. The second volume, when created, will automatically span the remainder of two hard drives.
7.
Go to the Create Volume field and press Enter, a WARNING message will appear for you to confirm if you are sure to create the RAID volume. Press Y to continue.
RAID Configuration
121
Delete RAID Volume
Here you can delete the RAID volume, but please be noted that all data on RAID drives will be lost.
Important
If your system currently boots to RAID and you delete the RAID volume in the IRST
Option ROM, your system will become unbootable.
Select option Delete RAID Volume from the main menu screen and press Enter key to select a RAID volume for deletion. Then press Delete key to delete the selected RAID volume. The following screen appears.
Name Level Drives Capacity Status Bootable
Volume0 RAID1(Mirror) 2 XXX.XGB Normal Yes
ALL DATA IN THE VOLUME WILL BE LOST!
(This does not apply to Recovery volumes)
HELP
Deleting a volume will reset the disks to non-RAID.
WARNING : ALL DISK DATA WILL BE DELETED.
(This does not apply to Recovery volumes)
[ ↑↓] - Select [ESC] - Previous Menu [DEL] - Delete Volume
Press Y key to accept the volume deletion.
Reset Disks to Non-RAID
Select option Reset Disks to Non-RAID from the main menu screen and press Enter to delete the RAID volume and remove any RAID structures from the drives. Use the
Space key to select the disks and press Enter key. A confirmation sentence will appear below, and then press Y key to accept the selection
1. Create RAID Volume
4. Recovery Volume Options
2. Delete RAID Volume
Resetting RAID disk will remove its RAID structures and revert it to a non-RAID disk.
RAID Volumes :
WARNING : Resetting a disk causes all data on the disk to be lost.
None defined.
(This does not apply to Recovery volumes)
Physical Devices :
Serial # Size Status
XXXXXXXXXXXXXX XXX.XGB Member Disk
2 XXXX-XXXXXXXX XXXXXXXXXXXXXX XXX.XGB
Non-RAID Disk
Select the disks that should be reset.
[ ↑↓] - Previous/ Next [SPACE] - Selects [ENTER] - Selection Complete
[ ↑↓] - Select [ESC] - Exit [ENTER] - Select Menu
122
RAID Configuration
Important
y
You will lose all data on the RAID drives and any internal RAID structures when you perform this operation.
y
Possible reasons to Reset Disks to Non-RAID could include issues such as incompatible RAID configurations or a failed volume or failed disk.
Recovery Volume Options
Select option Recovery Volume Options from the main menu screen and press Enter to change recovery volume mode. The following screen appears:
1. Enable Only Recovery Disk
2. Enable Only Master Disk
Enable Only Recovery Disk - enables recovery disk if available and disables master disk.
Enable Only Master Disk - enables master disk if available and disables recovery disk.
Actions will result in change from Continuous Update mode to On-Request.
[
↑↓] - select [ESC] - Previous Menu [ENTER] - Select
Recovery mode will change from Continuous Update to On-Request after you enable
Only Recovery Disk or Only Master Disk.
Degraded RAID Array
A RAID 1, RAID 5 or RAID 10 volume is reported as degraded when one of its hard drive members fails or is temporarily disconnected, and data mirroring is lost. As a result, the system can only utilize the remaining functional hard drive member. To re-establish data mirroring and restore data redundancy, refer to the procedure below that corresponds to the current situation.
RAID Volumes
ID Name Level Strip Size Status Bootable
0 Volume0 RAID 1(Mirror) N/A XXX.XGB Degraded Yes
Physical Disks:
Port Device Model
1 XXXXXXXXXXXXX
2 XXXXXXXXXXXXX
Serial #
XXXXXXXXXXXXX
XXXXXXXXXXXXX
Size
XXX.XGB
XXX.XGB
Type/Status(Vol ID)
Member Disk (0)
Member Disk (0)
Press <CTRL-I> to enter Configuration Utility..
Missing Hard Drive Member
1.
Power off.
2.
Reconnect the hard drive.
RAID Configuration
123
3.
Reboot to Windows
®
; the rebuild will occur automatically.
Failed Hard Drive Member
1.
Power off.
2.
Replace the failed hard drive with a new one that is of equal or greater capacity.
3.
Reboot the system to IRST Option ROM by press Ctrl + I keys during the POST.
4.
Select the port of the destination disk for rebuilding, and then press Enter.
1. Create RAID Volume
“Degraded” volume and disk available for rebuilding detected. Selecting a disk initiates a rebuild. Rebuild completes in the operating system.
Serial # Size
1 XXXX-XXXXXXXX XXXXXXXXXXXXXX XXX.XGB
Port Device Model Serial # Size Type/Status (Vol ID)
1 XXXX-XXXXXXXX XXXXXXXXXXXXXX XXX.XGB
Non-RAID Disk
2 XXXX-XXXXXXXX XXXXXXXXXXXXXX XXX.XGB
Non-RAID Disk
[ ↑↓] - Select [ESC] - Exit [ENTER] - Select Menu
5.
Exit IRST Option ROM, reboot to Windows
®
.
6.
When prompted to rebuild the RAID volume, click Yes.
7.
The Intel
®
Rapid Storage Technology application will be launched. Right-click the new hard drive and select Rebuild to this Disk. The Rebuild Wizard will be launched which will guide you through the process of rebuilding to the new hard drive.
124
RAID Configuration
Troubleshooting
Before sending the motherboard for RMA repair, try to go over troubleshooting guide first to see if your got similar symptoms as mentioned below.
The power is not on.
y
Connect the AC power cord to an electrical outlet securely.
y
Check if all ATX power connectors like
JPWR1~2 is connected from the power supply to the motherboard?
y
Some power supply units have a power button on the rear side, make sure the button is turned on.
y
Check if the power switch cable is connected to JFP1 pin header properly.
y
Verify the Clear CMOS jumper JBAT1 is set to Keep DATA.
y
Test with another known working power supply of equal or greater wattage.
The power is on, but no signal to monitor
y
Connect the monitor power cord to a electrical outlet securely.
y
Make sure the monitor is turned on.
y
Select different inputs on the monitor.
y
If 3 long beeps are heard, remove all memory modules and try to install only one memory module in the DIMM1 slot first and then restart the computer.
y
If 1 long 2 short beeps are heard, remove and reinstall the graphics card and then restart the computer.
y
Test with another known working graphics card.
The computer does not boot after updating the BIOS
y
Clear the CMOS.
y
Use the secondary BIOS to bootup the system (Only for motherboard with
Dual BIOS)
Lost BIOS password
y
Clear the CMOS, but that will cause you to lose all customized settings in the BIOS.
There is no audio
y
Adjust the volume.
y
Connect the speakers/headphones to audio ports on the motherboard rear
IO panel.
y
Remove secondary speakers/ headphones, HDMI cables, USB audio devices.
y
Test with another known working speaker or headphone.
There is no network
y
Make sure the network chipset driver has been installed.
y
Verify if the network cable is properly connected and make sure the LAN port
LEDs are properly illuminated. y
Verify your TCP/IP settings.
y
Restart or reset your router.
y
Test with another known working LAN cable.
The USB device is not working
y
Make sure your USB drive driver has been installed.
y
Verify if USB device is listed in
Windows
®
Device Manager.
y
Connect the USB device to other USB port on the motherboard rear IO panel.
Troubleshooting
125
Regulatory Notices
FCC Compliance Statement
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: y
Reorient or relocate the receiving antenna.
y
Increase the separation between the equipment and receiver.
y
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
y
Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user ’s authority to operate the equipment.
Tested to comply with FCC standards
FOR HOME OR OFFICE USE
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
CE Conformity
with the essential safety requirements and other relevant provisions set out in the European
Directive.
Hereby, Micro-Star International CO., LTD declares that this device is in compliance
C-Tick Compliance
B 급 기기 (가정용 방송통신기자재)
이 기기는 가정용(B급) 전자파적합기기로서 주
로 가정에서 사용하는 것을 목적으로 하며, 모
든 지역에서 사용할 수 있습니다.
クラスB情報技術装置
この装置は、クラスＢ情報技術装置です。この
装置は、家庭環境で使用することを目的として
いますが、この装置がラジオやテレビジョン受
信機に近接して使用されると、受信障害を引き起こすこと
があります。取扱説明書に従って
正しい取り扱いをして下さい
VCCI-B
Battery Information
European Union:
Batteries, battery packs, and accumulators should not be disposed of as unsorted household waste. Please use the public collection system to return, recycle, or treat them in compliance with the local regulations.
Taiwan:
廢電池請回收
For better environmental protection, waste batteries should be collected separately for recycling or special disposal.
California, USA:
The button cell battery may contain perchlorate material and requires special handling when recycled or disposed of in
California.
For further information please visit: http://www.dtsc.ca.gov/hazardouswaste/perchlorate/
CAUTION: There is a risk of explosion, if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the manufacturer.
Chemical Substances Information
In compliance with chemical substances regulations, such as the EU REACH Regulation (Regulation EC
No. 1907/2006 of the European Parliament and the
Council), MSI provides the information of chemical substances in products at: http://www.msi.com/html/popup/csr/evmtprtt_pcm.
html
Wireless Radio Use
This device is restricted to indoor use when operating in the 2.412GHz ~ 2.462GHz, 5GHz frequency band.
Cet appareil doit être utilisé à l ’intérieur.
당해 무선설비는 운용중 전파혼신 가능성이 있음.
この製品は、周波数帯域 2.412GHz ~ 2.462GHz, 5GHz で
動作しているときは、屋内においてのみ使用可能です。
工作頻率2.412GHz ~ 2.462GHz, 5GHz該頻段限於室內
使用。
無線設備警告聲明
經型式認證合格之低功率射頻電機，非經許可，公司、商
號或使用者均不得擅自變更頻率、加大功率或變更原設
計之特性及功能。
低功率射頻電機之使用不得影響飛航安全及干擾合法通
信；經發現有干擾現象時，應立即停用，並改善至無干擾時
方得繼續使用。前項合法通信，指依電信法規定作業之無
線電通信。低功率射頻電機須忍受合法通信或工業、科學
及醫療用電波輻射性電機設備之干擾。
126
Regulatory Notices
WEEE (Waste Electrical and
Electronic Equipment) Statement
ENGLISH
To protect the global environment and as an environmentalist, MSI must remind you that...
Under the European Union (“EU”)
Directive on Waste Electrical and
Electronic Equipment, Directive 2002/96/
EC, which takes effect on August 13,
2005, products of “electrical and electronic equipment” cannot be discarded as municipal wastes anymore, and manufacturers of covered electronic equipment will be obligated to take back such products at the end of their useful life. MSI will comply with the product take back requirements at the end of life of MSI-branded products that are sold into the EU. You can return these products to local collection points.
DEUTSCH
Hinweis von MSI zur Erhaltung und Schutz unserer
Umwelt
Gemäß der Richtlinie 2002/96/EG über Elektro- und
Elektronik-Altgeräte dürfen Elektro- und Elektronik-
Altgeräte nicht mehr als kommunale Abfälle entsorgt werden. MSI hat europaweit verschiedene Sammel- und Recyclingunternehmen beauftragt, die in die
Europäische Union in Verkehr gebrachten Produkte, am Ende seines Lebenszyklus zurückzunehmen.
Bitte entsorgen Sie dieses Produkt zum gegebenen
Zeitpunkt ausschliesslich an einer lokalen
Altgerätesammelstelle in Ihrer Nähe.
FRANÇAIS
En tant qu’écologiste et afin de protéger l’environnement, MSI tient à rappeler ceci...
Au sujet de la directive européenne (EU) relative aux déchets des équipement électriques et électroniques, directive 2002/96/EC, prenant effet le 13 août 2005, que les produits électriques et électroniques ne peuvent
être déposés dans les décharges ou tout simplement mis à la poubelle. Les fabricants de ces équipements seront obligés de récupérer certains produits en fin de vie. MSI prendra en compte cette exigence relative au retour des produits en fin de vie au sein de la communauté européenne. Par conséquent vous pouvez retourner localement ces matériels dans les points de collecte.
РУССКИЙ
Компания MSI предпринимает активные действия по защите окружающей среды, поэтому напоминаем вам, что....
В соответствии с директивой Европейского
Союза (ЕС) по предотвращению загрязнения окружающей среды использованным электрическим и электронным оборудованием (директива
WEEE 2002/96/EC), вступающей в силу 13 августа 2005 года, изделия, относящиеся к электрическому и электронному оборудованию, не могут рассматриваться как бытовой мусор, поэтому производители вышеперечисленного электронного оборудования обязаны принимать его для переработки по окончании срока службы.
MSI обязуется соблюдать требования по приему продукции, проданной под маркой MSI на территории
EC, в переработку по окончании срока службы. Вы можете вернуть эти изделия в специализированные пункты приема.
ESPAÑOL
MSI como empresa comprometida con la protección del medio ambiente, recomienda:
Bajo la directiva 2002/96/EC de la Unión Europea en materia de desechos y/o equipos electrónicos, con fecha de rigor desde el 13 de agosto de 2005, los productos clasificados como “eléctricos y equipos electrónicos” no pueden ser depositados en los contenedores habituales de su municipio, los fabricantes de equipos electrónicos, están obligados a hacerse cargo de dichos productos al termino de su período de vida. MSI estará comprometido con los términos de recogida de sus productos vendidos en la Unión Europea al final de su periodo de vida. Usted debe depositar estos productos en el punto limpio establecido por el ayuntamiento de su localidad o entregar a una empresa autorizada para la recogida de estos residuos.
NEDERLANDS
Om het milieu te beschermen, wil MSI u eraan herinneren dat….
De richtlijn van de Europese Unie (EU) met betrekking tot Vervuiling van Electrische en Electronische producten (2002/96/EC), die op 13 Augustus 2005 in zal gaan kunnen niet meer beschouwd worden als vervuiling. Fabrikanten van dit soort producten worden verplicht om producten retour te nemen aan het eind van hun levenscyclus. MSI zal overeenkomstig de richtlijn handelen voor de producten die de merknaam MSI dragen en verkocht zijn in de EU. Deze goederen kunnen geretourneerd worden op lokale inzamelingspunten.
SRPSKI
Da bi zaštitili prirodnu sredinu, i kao preduzeće koje vodi računa o okolini i prirodnoj sredini, MSI mora da vas podesti da…
Po Direktivi Evropske unije (“EU”) o odbačenoj ekektronskoj i električnoj opremi, Direktiva 2002/96/
EC, koja stupa na snagu od 13. Avgusta 2005, proizvodi koji spadaju pod “elektronsku i električnu opremu” ne mogu više biti odbačeni kao običan otpad i proizvođači ove opreme biće prinuđeni da uzmu natrag ove proizvode na kraju njihovog uobičajenog veka trajanja. MSI će poštovati zahtev o preuzimanju ovakvih proizvoda kojima je istekao vek trajanja, koji imaju MSI oznaku i koji su prodati u EU. Ove proizvode možete vratiti na lokalnim mestima za prikupljanje.
POLSKI
Aby chronić nasze środowisko naturalne oraz jako firma dbająca o ekologię, MSI przypomina, że...
Zgodnie z Dyrektywą Unii Europejskiej (“UE”) dotyczącą odpadów produktów elektrycznych i elektronicznych
(Dyrektywa 2002/96/EC), która wchodzi w życie 13 sierpnia 2005, tzw. “produkty oraz wyposażenie elektryczne i elektroniczne “ nie mogą być traktowane jako śmieci komunalne, tak więc producenci tych produktów będą zobowiązani do odbierania ich w momencie gdy produkt jest wycofywany z użycia.
MSI wypełni wymagania UE, przyjmując produkty
(sprzedawane na terenie Unii Europejskiej) wycofywane z użycia. Produkty MSI będzie można zwracać w wyznaczonych punktach zbiorczych.
Regulatory Notices
127
TÜRKÇE
Çevreci özelliğiyle bilinen MSI dünyada çevreyi korumak için hatırlatır:
Avrupa Birliği (AB) Kararnamesi Elektrik ve Elektronik
Malzeme Atığı, 2002/96/EC Kararnamesi altında 13
Ağustos 2005 tarihinden itibaren geçerli olmak üzere, elektrikli ve elektronik malzemeler diğer atıklar gibi çöpe atılamayacak ve bu elektonik cihazların
üreticileri, cihazların kullanım süreleri bittikten sonra
ürünleri geri toplamakla yükümlü olacaktır. Avrupa
Birliği’ne satılan MSI markalı ürünlerin kullanım süreleri bittiğinde MSI ürünlerin geri alınması isteği ile işbirliği içerisinde olacaktır. Ürünlerinizi yerel toplama noktalarına bırakabilirsiniz.
ČESKY
Záleží nám na ochraně životního prostředí - společnost
MSI upozorňuje...
Podle směrnice Evropské unie (“EU”) o likvidaci elektrických a elektronických výrobků 2002/96/
EC platné od 13. srpna 2005 je zakázáno likvidovat
“elektrické a elektronické výrobky” v běžném komunálním odpadu a výrobci elektronických výrobků, na které se tato směrnice vztahuje, budou povinni odebírat takové výrobky zpět po skončení jejich životnosti. Společnost MSI splní požadavky na odebírání výrobků značky MSI, prodávaných v zemích
EU, po skončení jejich životnosti. Tyto výrobky můžete odevzdat v místních sběrnách.
MAGYAR
Annak érdekében, hogy környezetünket megvédjük, illetve környezetvédőként fellépve az MSI emlékezteti
Önt, hogy ...
Az Európai Unió („EU”) 2005. augusztus 13-án hatályba lépő, az elektromos és elektronikus berendezések hulladékairól szóló 2002/96/EK irányelve szerint az elektromos és elektronikus berendezések többé nem kezelhetőek lakossági hulladékként,
és az ilyen elektronikus berendezések gyártói kötelessé válnak az ilyen termékek visszavételére azok hasznos élettartama végén. Az MSI betartja a termékvisszavétellel kapcsolatos követelményeket az MSI márkanév alatt az EU-n belül értékesített termékek esetében, azok élettartamának végén. Az ilyen termékeket a legközelebbi gyűjtőhelyre viheti.
ITALIANO
Per proteggere l’ambiente, MSI, da sempre amica della natura, ti ricorda che….
In base alla Direttiva dell’Unione Europea (EU) sullo
Smaltimento dei Materiali Elettrici ed Elettronici,
Direttiva 2002/96/EC in vigore dal 13 Agosto 2005, prodotti appartenenti alla categoria dei Materiali
Elettrici ed Elettronici non possono più essere eliminati come rifiuti municipali: i produttori di detti materiali saranno obbligati a ritirare ogni prodotto alla fine del suo ciclo di vita. MSI si adeguerà a tale Direttiva ritirando tutti i prodotti marchiati MSI che sono stati venduti all’interno dell’Unione Europea alla fine del loro ciclo di vita. È possibile portare i prodotti nel più vicino punto di raccolta
日本JIS C 0950材質宣言
日本工業規格JIS C 0950により、2006年7月1日以降に販
売される特定分野の電気および電子機器について、製造
者による含有物質の表示が義務付けられます。 http://www.msi.com/html/popup/csr/cemm_jp.html
http://tw.msi.com/html/popup/csr_tw/cemm_jp.html
India RoHS
“India E-waste
(Management and Handling) Rule 2011 ” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and
0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.
Türkiye EEE yönetmeliği
Türkiye Cumhuriyeti: EEE Yönetmeliğine Uygundur
Україна обмеження на наявність небезпечних речовин
Обладнання відповідає вимогам Технічного регламенту щодо обмеження використання деяких небезпечних речовин в електричному та електронному обладнані, затвердженого постановою
Кабінету Міністрів України від 3 грудня 2008 № 1057.
Vi ệt Nam RoHS
K ể từ ngày 01/12/2012, tất cả các sản phẩm do công ty MSI s ản xuất tuân thủ Thông tư số 30/2011/TT-BCT quy định tạm thời về giới hạn hàm lượng cho phép của m ột số hóa chất độc hại có trong các sản phẩm điện, điện tử”
Environmental Policy
y
The product has been designed to enable proper reuse of parts and recycling and should not be thrown away at its end of life.
y
Users should contact the local authorized point of collection for recycling and disposing of their end-of-life products.
y
Visit the MSI website and locate a nearby distributor for further recycling information.
y
Users may also reach us at [email protected] for information regarding proper Disposal, Take-back,
Recycling, and Disassembly of MSI products.
128
Regulatory Notices
产品中有害物质的名称及含量
部件名称
铅
(Pb)
X
汞
(Hg)
O
镉
(Cd)
有害物质
六价铬
(Cr(VI))
多溴联苯
(PBB)
O O O
多溴二苯醚
(PBDE)
O 印刷电路板组件*
电池**
外部信号连接头
X
X
O
O
O
O
O
O
O
O
O
O
线材
X O O O O O
本表格依据 SJ/T 11364 的规定编制。
O:
表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572 规定的限量要求以下。
X:
表示该有害物质至少在该部件的某一均质材料中的含量超出 GB/T 26572 规定的限量要求，但所有部件都符合欧盟
RoHS 要求。
* 印刷电路板组件: 包括印刷电路板及其构成的零部件。
** 电池本体上如有环保使用期限标识，以本体标识为主。
■ 上述有毒有害物质或元素清单会依型号之部件差异而有所增减。
■ 產品部件本体上如有环保使用期限标识，以本体标识为主。
Copyright
Micro-Star Int ’l Co.,Ltd.
Copyright © 2016 All rights reserved.
The material in this document is the intellectual property of Micro-Star Int ’l Co.,Ltd. We take every care in the preparation of this document, but no guarantee is given as to the correctness of its contents. Our products are under continual improvement and we reserve the right to make changes without notice.
Technical Support
If a problem arises with your system and no solution can be obtained from the user guide, please contact your place of purchase or local distributor.
Alternatively, please try the following help resources for further guidance.
y
Visit the MSI website for technical guide, BIOS updates, driver updates, and other information: http://www.msi.com y
Register your product at: http://register.msi.com
Trademark Recognition
All product names used in this manual are the properties of their respective owners and are acknowledged.
Revision History
Version 1.0, 2016/05, First Release
Version 1.1, 2016/07, Update software list.
Version 1.2, 2016/09, release for X99S XPOWER
GAMING TITANIUM/USB3.0
Regulatory Notices
129
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project