Safety Information
IMPORTANT SAFETY
INSTRUCTIONS
When using electrical products, basic precautions should always be followed, including the following: a.
READ AND FOLLOW ALL
SAFETY INSTRUCTIONS.
b.Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in outdoor applications, connect the product to a
Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation.
c. This seasonal product is not intended for permanent installation or use.
d.Do not mount or place the product near gas or electric heaters, fireplaces, candles, or other similar sources of heat.
e.Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
f. Do not let lamps rest on the supply cord or on any wire.
g.Unplug the product when leaving the house, when retiring for the night, or if left unattended.
h.This is an electric product and not a toy! To avoid risk of fire, burns, personal injury and electric shock it should not be played with or placed where small children can reach it.
i. Do not use this product for other than its intended use.
j. Do not hang ornaments or other objects from cord, wire, or light string.
k.Do not close doors or windows on the product or extensions cords as this may damage the wire insulation.
l. Do not cover the product with cloth, paper, or any material that is not a part of the product when in use.
m.This product has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock.
This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not use with an extension cord unless plug can be fully inserted.
Do not alter or replace the plug.
n.This product is equipped with push-in type lamps. Do not twist lamps.
o.This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse blows, unplug the product from the outlet. Also unplug any additional strings or products that may be attached to the product. Replace the fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check the product.
p.Read and follow all instructions that are on the product
or provide with the product.
q.
SAVE THESE INSTRUCTIONS
Christmas Tree
Model: TG76P3739D06
Sku # 416 192
Pre-Assembly
Package Contents
Part Description Quantity
A Tree top, tag 3 1
B Tree center, tag 2 1
C Tree bottom, tag 1 1
D Tree stand 1
Assembly
Assembling the tree stand
Step 1. Choose a location near a wall outlet.
Step 2. Unfold the legs of the tree stand and lay the stand on
the floor.
Step 3. Slide the locking disk of the tree stand down until it
snaps into place.
Assembling the tree
This tree assmebles with Quick Set® technology
---Set up and light up your tree in less than 10 minutes!
Step 1.Remove the protective caps from the tree bottom
and insert the pole into the tree stand.
Step 2.Continue by inserting the upper tree section(s) to
the lower section(s) until inserting the tree top.
Step 3.Shape the branches to your preference by working
from the bottom to the top. When adjusting
branches, ensure that all wires are free of branch
hinges.
Step 4.Insert the green label extension cord plug into the
wall outlet. All your lights should now be lit.
Step 5.When finished shaping the branches, slightly
upsweep all branch tips for a uniform look.
Section 2
S100
S100
Section 1
Section 3
S50
S80
S50
S100
S100
Do Not Tamper
Internal Parts
Open the protective cover
Do Not Tamper
Internal Parts
Open the protective cover
Adaptor
To Be Plugged
Into Wall
Outlet
Control box
Operation
Turning on the tree
NOTE: If some bulbs do not light or flicker, search for any loose plugs and/or broken, loose, or missing bulbs. Replace bulbs promptly with the replacement bulbs provided in order to maintain the performance and life expectancy of your tree.
Step 1. Connect the light strings of the tree together and
plug the power cord into a wall outlet.
Step 2. If the tree comes with a foot pedal, step on the
On/Off button.
Maintenance
Spare parts
This tree package includes hinge pins, washers and bulbs for any replacement or repair that you need to perform on your tree. If extra parts are needed, contact the Customer
Service Team at 1-877-527-0313 between the hours of 8 am and 5 pm EST, Monday through Friday.
Repairing Loose Hinges
Step 1. Place the branch into the slot of the bracket
Step 2. Insert a new hinge pin through the holes of the
bracket and secure with a washer.
Use and Care Instructions
1. Before using or reusing, inspect product carefully. Discard any products that have cut, damaged or frayed wire insulation or cords, cracks in the lampholders or enclosures, loose connections, or exposed copper wire.
2.Before disassembling the tree, unplug the tree and remove all ornaments and decorations.
3.Gently lift the tree top straight up to remove from the center section and fold all branches towards the pole.
4.Repeat this step for the center and bottom tree sections.
5.When storing the product, carefully remove the product from wherever it is placed, including tree,
branches, or bushes, to avoid any
undue strain or stress on the
product conductors, connections,
and wires. Cover the protective cap
on the poles to avoid damaging the
internal parts.
6.When not in use, store neatly in a cool, dry location protected from sunlight.
User servicing instructions
HOW TO USE THE DUAL COLOR LIGHT CONTROLLER
AND REMOTE CONTROL:
Press the selector button on the “Dual Color Light Control ler” or “Remote Controller” to select among:
(1) STEADY CLEAR; (2) FLASHING CLEAR;
(3) CLEAR-MULTI-FLASHING; (4) STEADY MULTI;
(5) FLASHING MULTI; (6) SLO GLO; (7) CLEAR-MULTI
ALTERNATING; and (8) COMBINATION.
Note: For the remote controller, replace only with CR2032 battery.
See bottom of the remote controller for replacement instruction.
Remote
Controller
Selector
Button
Light
Controller
Troubleshooting
Christmas Tree
Model: TG76P3739D06
Sku # 416 192
CAUTION:
Use only power adaptor that was provided with this product. Using a different power adaptor will damage the lights and cause fire, electrical shock hazard.
Problem Solution
The tree does not light
Ensure that all tree sections are plugged into each other and that the tree is plugged into the wall. If your tree came with a foot pedal, step on the On/Off button.
Check for blown fuses at the light string and power cord plugs. Replace as needed with the replacement fuses provided.
Check for loose, broken, or missing bulbs and replace as needed with the replacement bulbs provided
