TL-271 -- Intertek Testing Services NA Inc.(Middleton, WI)

TL-271 -- Intertek Testing Services NA Inc.(Middleton, WI)
IAS Accreditation Number
Company Name
Address
Contact Name
Telephone
Effective Date of Scope
Accreditation Standard
TL-271
Intertek Testing Services NA Inc.
8431 Murphy Dr.
Middleton, WI 53562
Brian Brunson, Manager – Regional Operations
(608) 824-7444
February 13, 2017
ISO/IEC 17025:2005
Conformity Specifications
ASTM E329
Standard
specification for agencies
engaged
in
construction inspection, testing, or special inspection
(sections 8-12)
ASTM E699
Standard specification for agencies involved in testing,
quality assurance and evaluating of manufactured
building components (part A)
Chemical
ASTM C871
Standard test methods for chemical analysis of thermal
insulation materials for leachable chloride, fluoride,
silicate, and sodium ions
ASTM D1475
Standard test method for density of liquid coatings, inks,
and related products
ASTM D2369
Standard test method for volatile content of coatings
ASTM D4017
Standard test method for water in paints and paint
materials by Karl Fischer method
ASTM D4208
Standard test method for total chlorine in coal by the
oxygen bomb combustion/ion selective electrode method
ASTM D5403
Standard test methods for volatile content of radiation
curable materials (limited to UV exposure)
ASTM D6886
Standard test method for determination of the weight
percent individual volatile organic compounds in
waterborne air-dry coatings by gas chromatography
ASTM E1252
Standard practice for general techniques for obtaining
infrared spectra for qualitative analysis (sections 6.2,
6.3, 6.5.3, 7.7, 9.1, 9.2 and 9.3 only)
International Accreditation Service, Inc.
3060 Saturn Street, Suite 100, Brea, California 92821 U.S.A
Telephone +1 562-364-8201 — [email protected]
www.iasonline.org
Page 1 of 20
ASTM F925
Standard test method for resistance to chemicals of
resilient flooring
ASTM G87
Standard practice for conducting moist SO2 tests
EN 1205
Chemicals used for treatment of water intended for
human
consumption
disodium
dihydrogen
pyrophosphate
EPA Method 24
Determination of volatile matter content, water content,
density, volume solids, and weight solids of surface
coatings
ISO 3231
Paints and varnishes -- determination of resistance to
humid atmospheres containing sulfur dioxide
ISO/BS 14707
Surface chemical analysis -- glow discharge optical
emission spectrometry (GD-OES) -- introduction to use
(optical emission spectrometry)
ISO/BS 16962
Surface chemical analysis -- analysis of zinc- and/or
aluminium-based metallic coatings by glow-discharge
optical-emission spectrometry (analysis of zinc and or
aluminum-based metallic coatings by glow discharge
surface analyzer)
ISO/EN 8092-2
Road vehicles -- connections for on-board electrical
wiring harnesses -- part 2: definitions, test methods and
general performance requirements (section 4.24 only)
ISO/EN 6988
Metallic and other non organic coatings -- sulfur dioxide
test with general condensation of moisture
Environmental
ANSI/BHMA A156.18
Materials and finishes
ASTM B117
Standard practice for operating salt spray (fog) apparatus
ASTM C692
Standard test method for evaluating the influence of
thermal insulations on external stress corrosion cracking
tendency of austenitic stainless steel
ASTM D1653
Standard test methods for water vapor transmission of
organic coating films
ASTM D1669/D1669M
Standard practice for preparation of test panels for
accelerated and outdoor weathering of bituminous
coatings (section 9.8 only)
ASTM D5116
Standard guide for small-scale environmental chamber
determinations of organic emissions from indoor
materials/products
TL-271
Intertek Testing Services NA, Inc.
Page 2 of 20
ASTM D4798/D4798M
Standard practice for accelerated weathering test
conditions and procedures for bituminous materials
(xenon-arc method)
ASTM D5197
Standard test method for determination of formaldehyde
and other carbonyl compounds in air (active sampler
methodology)
ASTM D6330
Standard practice for determination of volatile organic
compounds (excluding formaldehyde) emissions from
wood-based panels using small environmental chambers
under defined test conditions
ASTM D7339
Standard test method for determination of volatile
organic compounds emitted from carpet using a specific
sorbent
tube
and
thermal
desorption
/
gas
chromatography
ASTM D7897
Standard practice for laboratory soiling and weathering of
roofing materials to simulate effects of natural exposure
on solar reflectance and thermal emittance
ASTM E773
Standard test method for accelerated weathering of
sealed insulating glass units
ASTM E791
Standard test method for calculating refuse-derived fuel
analysis data from as-determined to different bases
ASTM E859/E859M
Standard test method for air erosion of sprayed fireresistive materials (SFRMs) applied to structural
members
ASTM E871
Standard test method for moisture analysis of particulate
wood fuels
ASTM E873
Standard test method for bulk density of densified
particulate biomass fuels
ASTM E937/E937M
Standard test method for corrosion of steel by sprayed
fire-resistive material (SFRM) applied to structural
members
ASTM G1
Standard practice for preparing, cleaning, and evaluating
corrosion test specimens
ASTM G147
Standard practice for conditioning and handling of
nonmetallic materials for natural and artificial weathering
tests
ASTM G151
Standard practice for exposing nonmetallic materials in
accelerated test devices that use laboratory light sources
(except section 5.1)
TL-271
Intertek Testing Services NA, Inc.
Page 3 of 20
ASTM G154
Standard practice for operating fluorescent ultraviolet
(UV) lamp apparatus for exposure of nonmetallic
materials
California Method 01350
Standard method for the testing and evaluation of
volatile organic chemical emissions from indoor sources
using environmental chambers
CAN/ULC S774
Standard laboratory guide for the determination of
volatile organic compound emissions from polyurethane
foam
CDPH Standard Method version 1.1
Standard method for the testing and evaluation of
volatile organic chemical emissions from indoor sources
using environmental chambers
Compendium Method TO-17
Determination of volatile organic compounds in ambient
air using active sampling onto sorbent tubes
DIN 50018
Testing in a saturated atmosphere in the presence of
sulfur dioxide
Fire
1997 UBC 7-1
Fire tests of building construction and materials
1997 UBC 7-2
Fire tests of door assemblies
1997 UBC 7-3
Tin clad fire doors
1997 UBC 7-4
Fire tests of door assemblies
1997 UBC 7-5
Fire tests of through-penetration fire stops
1997 UBC 8-1
Test method for
building materials
1997 UBC 15-2
Test standard for determining the fire retardancy of roof
assemblies
1997 UBC 26-6
Ignition properties of plastics
1997 UBC 26-7
Method of test for determining classification of approved
light-transmitting plastics
ABD 0031
Fire test to aircraft material
ASTM D635
Standard test method for rate of burning and/or extent
and time of burning of plastics in a horizontal position
ASTM D648
Standard test method for deflection temperature of
plastics under flexural load in the edgewise position
TL-271
Intertek Testing Services NA, Inc.
surface-burning
characteristics
of
Page 4 of 20
ASTM D1929
Standard
test
method
temperature of plastics
ASTM D2843
Standard test method for density of smoke from the
burning or decomposition of plastics
ASTM D2863
Standard test method for measuring the minimum
oxygen concentration to support candle-like combustion
of plastics (oxygen index)
ASTM E108
Standard test methods for fire tests of roof coverings
ASTM E119
Standard test methods for
construction and materials
ASTM E136
Standard test method for behavior of materials in a
vertical tube furnace at 750°C
ASTM E152
Methods of fire tests of door assemblies
ASTM E162
Standard test method for surface flammability
materials using a radiant heat energy source
ASTM E648
Standard test method for critical radiant flux of floorcovering systems using a radiant heat energy source
ASTM E662
Standard test method for specific optical density of
smoke generated by solid materials
ASTM E698
Standard test method for kinetic parameters for
thermally unstable materials using differential scanning
calorimetry and the Flynn/Wall/Ozawa method
ASTM E793
Standard test method for enthalpies of fusion and
crystallization by differential scanning calorimetry
ASTM E800
Standard guide for measurement of gases present or
generated during fires
ASTM E814
Standard test method for fire tests of penetration firestop
systems
ASTM E928
Standard test method for purity by differential scanning
calorimetry
ASTM E970
Standard test method for critical radiant flux of exposed
attic floor insulation using a radiant heat energy source
ASTM E1354
Standard test method for heat and visible smoke release
rates for materials and products using an oxygen
consumption calorimeter
TL-271
Intertek Testing Services NA, Inc.
for
determining
fire
tests
of
ignition
building
of
Page 5 of 20
ASTM E1356
Standard test method for assignment of the glass
transition
temperatures
by
differential
scanning
calorimetry
UL 1703
Standard for flat-plate photovoltaic modules and panels,
(sections 31.1 and 31.2 only)
BS 476-20
Fire resistance test to building material
BS 476-22
Fire tests on building materials and structures - method
for determination of the fire resistance of nonloadbearing elements of construction
BS EN 597-1
Furniture - assessment of the ignitability of mattresses
and upholstered bed bases - ignition source smouldering
cigarette
BS EN 597-2
Furniture - assessment of the ignitability of mattresses
and upholstered bed bases - ignition source: match flame
equivalent
BS EN 1021-1
Furniture - assessment of the ignitability of upholstered
furniture - ignition source smouldering cigarette
BS EN 1021-2
Furniture - assessment of the ignitability of upholstered
furniture - ignition source match flame equivalent
BS EN 1363-1
Fire resistance tests - general requirements
BS EN 1634-1
Fire resistance and smoke control tests for door and
shutter assemblies, openable windows and elements of
building hardware - fire resistance test for door and
shutter assemblies and openable windows
BS EN ISO 4589-2
Plastics - determination of burning behaviour by oxygen
index - guidance
BS EN ISO 4589-3
Plastics - determination of burning behaviour by oxygen
index - elevated temperature test
BS EN 6807
Methods of test for assessment of ignitability of
mattresses, upholstered divans and upholstered bed
bases with flaming types of primary and secondary
sources of ignition
BSS 7238
Fire test to aircraft material – toxicity
BSS 7230
Flammability testing of aircraft materials
BSS 7239
Toxic gas generation
TL-271
Intertek Testing Services NA, Inc.
Page 6 of 20
CA TB 117
Requirements, test procedure and apparatus for testing
the flame retardance of resilient filling materials used in
upholstered furniture
CA Title 19
Flame retardant regulations
FMVSS 302
Flammability of interior materials
ISO 834-1
Fire-resistance tests -- elements of building construction
-- part 1: general requirements
ISO 1182
Reaction to fire tests for products -- non-combustibility
test
ISO 3008
Fire-resistance tests -- door and shutter assemblies
ISO 5659
Plastics -- smoke generation -- part 2: determination of
optical density by a single-chamber test
ISO 19702
Guidance for sampling and analysis of toxic gases and
vapors in fire effluents using Fourier transform infrared
(FTIR) spectroscopy
MIL-STD-24643C
DETAIL specification: cables, electric, low smoke
halogen-free, for shipboard use general specification
(sections 4.8.25 and 4.8.27)
MIL-STD-24640C
Detail specification: cables, light-weight, electric, for
shipboard use, general specification (sections 4.7.17 and
4.7.19)
MIL-PRF-85045G
Performance specification: cables, fiber optic, general
specification (sections 4.8.3 and 4.8.6)
NES 711
Determination of the smoke index of the products of
combustion from small specimens of materials
NES 713
Determination of the toxicity index of the products of
combustion from small specimens of materials
NFPA 251
Standard methods of tests of fire resistance of building
construction and materials
NFPA 252
Standard methods of fire tests of door assemblies
NFPA 253
Standard method of test for critical radiant flux of floor
covering systems using a radiant heat energy source
NFPA 256
Standard methods of fire tests of roof coverings
NFPA 257
Standard on fire test for window and glass block
assemblies
TL-271
Intertek Testing Services NA, Inc.
Page 7 of 20
NFPA 259
Standard test method for potential heat of building
materials
NFPA 261
Standard method of test for determining resistance of
mock-up upholstered furniture material assemblies to
ignition by smoldering cigarettes
NFPA 701
Standard methods of fire tests for flame propagation of
textiles and films
UL 9
Standard for fire tests of window assemblies
UL 10A
Standard for tin-clad fire doors
UL 10B
Standard for fire tests of door assemblies
UL 10C
Standard for
assemblies
positive
UL 10D
Standard for
assemblies
fire
UL 94
Standard for tests for flammability of plastic materials for
parts in devices and appliances
UL 263
Standard for fire tests of building construction and
materials
UL 790
Standard for standard test methods for fire tests of roof
coverings
UL 1479
Standard for fire tests of penetration firestops
UL 2079
Standard for tests for fire resistance of building joint
systems
ULC S109
Flame tests of flame-resistant fabrics and films
ULC S135
Standard method of test for determination of degrees of
combustibility of building materials using an oxygen
consumption calorimeter (cone calorimeter)
pressure
tests
of
fire
fire
tests
protective
of
door
curtain
Heating/Cooling
ANSI Z21.1
Household cooking gas appliances
ANSI Z21.10.1
Gas water heaters volume I, storage water heaters with
input ratings of 75,000 Btu per hour or less
ANSI Z21.11.1
Gas-fired room heaters V: vented room heaters
ANSI Z21.11.2
Gas-fired room heaters - volume II, unvented room
heaters
TL-271
Intertek Testing Services NA, Inc.
Page 8 of 20
ANSI Z21.12
Draft hoods
ANSI Z21.13
Gas-fired low pressure steam and hot water boilers
ANSI Z21.50
Vented decorative gas appliances
ANSI Z21.58
Outdoor cooking gas appliances
ANSI Z21.60
Decorative gas appliances for installation in solid-fuel
burning fireplaces
ANSI Z21.88
Vented gas fireplace heaters
ANSI Z83.8
Gas unit heaters, gas packaged heaters, gas utility
heaters, and gas-fired duct furnaces
ANSI Z83.11
Gas food service equipment
ANSI Z83.14
Gas food service equipment - counter appliances (counter
or floor mounted)
ANSI/UL 103
Standard for factory-built chimneys for residential type
and building heating appliances
ANSI/UL 127
Standard for factory-built fireplaces
ANSI/UL 737
Standard for fireplace stoves
ANSI/UL 1482
Standard for solid-fuel type room heaters
AS 4553
Gas space heating appliances
AS 4558
Decorative gas log and other fuel effect appliances
AS 4565
Radiant gas heaters for outdoor and non-residential
indoor use
ASTM E1509
Standard specification for room heaters, pellet fuelburning type
NZ 5262
Gas appliance safety
UL 391
Standard for solid-fuel and combination-fuel central and
supplementary furnaces
UL 795
Standard
for
equipment
UL 907
Standard for fireplace accessories
commercial-industrial
gas
heating
Misc./Energy Star
ANSI/BHMA A156.36
TL-271
Intertek Testing Services NA, Inc.
Auxiliary locks
Page 9 of 20
ANSI/BHMA A156.39
Residential locksets and latches
ANSI/BHMA A156.40
Residential deadbolts
ANSI/BHMA 156.1
Butts and hinges
ANSI/BHMA 156.2
Bored & preassembled locks and latches
ANSI/BHMA 156.3
Exit devices
ANSI/BHMA 156.4
Door controls-closers
ANSI/BHMA 156.5
Cylinders and input devices for locks
ANSI/BHMA 156.6
Architectural door trim
ANSI/BHMA 156.9
Cabinet hardware
ANSI/BHMA 156.10
Power operated pedestrian doors
ANSI/BHMA 156.11
Cabinet locks
ANSI/BHMA 156.12
Interconnected locks & latches
ANSI/BHMA 156.13
Mortise locks
ANSI/BHMA 156.15
Release devices
ANSI/BHMA 156.16
Auxiliary hardware
ANSI/BHMA 156.17
Self closing hinges
ANSI/BHMA 156.20
Strap and tee hinges and hasps
ANSI/BHMA 156.21
Thresholds
ANSI/BHMA 156.23
Electromagnetic locks
ANSI/BHMA 156.24
Delayed egress locks
ASTM C1371
Standard test method for determination of emittance of
materials near room temperature using portable
emissometers
ASTM C1549
Standard test method for determination of solar
reflectance near ambient temperature using a portable
solar reflectometer
ASTM D4557
Standard practice for collecting benthic macroinvertebrates with surber and related type samplers
ASTM E1918
Standard test method for measuring solar reflectance of
horizontal and low-sloped surfaces in the field
TL-271
Intertek Testing Services NA, Inc.
Page 10 of 20
ASTM E424
Standard test methods for solar energy transmittance
and reflectance (terrestrial) of sheet materials
EN 179
Building hardware - emergency exit devices operated by
a lever handle or push pad, for use on escape routes requirements and test methods
EN 1125
Building hardware - panic exit devices operated by a
horizontal bar, for use on escape routes - requirements
and test methods
EN 1154
Building hardware - controlled door closing devices requirements and test methods
EN 1155
Building hardware - electrically powered hold-open
devices for swing doors -requirements and test methods
EN 1158
Building hardware - door coordinator
requirements and test methods
EN 1303
Building hardware - cylinders for locks - requirements
and test method
EN 1527
Building hardware - hardware for sliding doors and
folding doors - requirements and test methods
EN 1906
Building hardware - lever handles and knob furniture requirements and test method
EN 1935
Building hardware - single-axis hinges - requirements
and test methods
EN 12209
Building hardware - mechanically operated locks and
locking plates - requirements and test methods
EN 12320
Building hardware - padlocks and padlock fittings requirements and test methods
Roof Products Version 2.2
Energy Star® program requirements for roof products
devices
-
Physical
1997 UBC 24-2
Safety glazing
1997 UBC 26-7
Method of test for determining classification of approved
light-transmitting plastics
AAMA 501.1-
Standard test method for water penetration of windows,
curtain walls and doors using dynamic pressure
AAMA 501.2
Quality assurance and diagnostic water leakage field
check of installed storefronts, curtain walls and sloped
glazing systems
TL-271
Intertek Testing Services NA, Inc.
Page 11 of 20
AAMA/WDMA/CSA 101/IS2/A440 Standard/specification for windows, doors, and skylights
AATCC 127
Water resistance: hydrostatic pressure test
ANSI A151.1
Test procedure and acceptance criteria for physical
endurance
ANSI A250.4
Test procedure and acceptance criteria for – physical
endurance for steel doors, frames and frame anchors
ANSI Z97.1
Standard for safety glazing materials used in buildings –
safety performance specifications and methods of test
ANSI/NFPA 96
Standard for ventilation control and fire protection of
commercial cooking operations
ASTM C271/C271M
Standard test method for density of sandwich core
materials
ASTM C297/C297M
Standard test method for flatwise tensile strength of
sandwich constructions
ASTM C473
Standard test methods for physical testing of gypsum
panel products
ASTM C495/C495M
Standard test method for compressive
lightweight insulating concrete
ASTM C1325
Standard specification for non-asbestos fiber-mat
reinforced cementitious backer units (excluding surface
burning characteristics, mold resistance, bacteria
resistance and freeze thaw resistance)
ASTM C1396/C1396M
Standard specification for gypsum board
ASTM C1629/C1629M
Standard classification for abuse-resistant nondecorated
interior gypsum panel products and fiber-reinforced
cement panels
ASTM D143
Standard test methods for small clear specimens of
timber
ASTM D523
Standard test method for specular gloss
ASTM D638
Standard test method for tensile properties of plastics
ASTM D737
Standard test method for air permeability of textile
fabrics
ASTM D779
Standard test method for determining the water vapor
resistance of sheet materials in contact with liquid water
by the dry indicator method
TL-271
Intertek Testing Services NA, Inc.
strength
of
Page 12 of 20
ASTM D790
Standard test methods for flexural properties of
unreinforced and reinforced plastics and electrical
insulating materials
ASTM D792
Standard test methods for density and specific gravity
(relative density) of plastics by displacement
ASTM D905
Standard test method for strength properties of adhesive
bonds in shear by compression loading
ASTM D906
Standard test method for strength properties of
adhesives in plywood type construction in shear by
tension loading
ASTM D1037
Standard test methods for evaluating properties of woodbase fiber and particle panel materials (excluding
sections 7, 17, 18, 22 and 28)
ASTM D1102
Standard test method for ash in wood
ASTM D1623
Standard test method for tensile and tensile adhesion
properties of rigid cellular plastics
ASTM D1875
Standard test method for density of adhesives in fluid
form
ASTM D2016
Methods of test for moisture content of wood
ASTM D2136
Standard
test
method
temperature bend test
ASTM D2244
Standard practice for calculation of color tolerances and
color differences from instrumentally measured color
coordinates
ASTM D2247
Standard practice for testing water resistance of coatings
in 100 % relative humidity
ASTM D2273
Standard test method for trace sediment in lubricating
oils (trace sediment in lubricating oils)
ASTM D2394
Standard test methods for simulated service testing of
wood and wood-base finish flooring
ASTM D2394
Standard test methods for simulated service testing of
wood and wood-base finish flooring (section 33 only)
ASTM D2457
Standard test method for specular gloss of plastic films
and solid plastics
ASTM D2794
Standard test method for resistance of organic coatings
to the effects of rapid deformation (impact)
TL-271
Intertek Testing Services NA, Inc.
for
coated
fabrics—low-
Page 13 of 20
ASTM D2842
Standard test method for water absorption of rigid
cellular plastics
ASTM D3161/D3161M
Standard test method for wind-resistance of steep slope
roofing products (fan-induced method)
ASTM D3283
Standard specification for air as an electrical insulating
material
ASTM D3746/D3746M
Standard test method for impact resistance of bituminous
roofing systems
ASTM D4060
Standard test method for abrasion resistance of organic
coatings by the taber abraser
ASTM D5206
Standard test method for windload resistance of rigid
plastic siding
ASTM D5402
Standard practice for assessing the solvent resistance of
organic coatings using solvent rubs
ASTM D6226
Standard test method for open cell content of rigid
cellular plastics
ASTM D6578/D6578M
Standard practice for determination of graffiti resistance
ASTM D7073
Standard guide for application and evaluation of brush
and roller applied paint films
ASTM D7089
Standard practice for determination of the effectiveness
of anti-graffiti coating for use on concrete, masonry and
natural stone surfaces by pressure washing
ASTM E8/E8M
Standard test methods for tension testing of metallic
materials
ASTM E18
Standard test methods for Rockwell hardness of metallic
materials
ASTM E72
Standard test methods of conducting strength tests of
panels for building construction
ASTM E96/E96M
Standard test methods for water vapor transmission of
materials
ASTM E283
Standard test method for determining rate of air leakage
through exterior windows, curtain walls, and doors under
specified pressure differences across the specimen
ASTM E331
Standard test method for water penetration of exterior
windows, skylights, doors, and curtain walls by uniform
static air pressure difference
TL-271
Intertek Testing Services NA, Inc.
Page 14 of 20
ASTM E384
Standard test method for micro-indentation hardness of
materials
ASTM E547
Standard test method for water penetration of exterior
windows, skylights, doors, and curtain walls by cyclic
static air pressure difference
ASTM E605/E605M
Standard test methods for thickness and density of
sprayed fire-resistive material (SFRM) applied to
structural members
ASTM E736/E736M
Standard test method for cohesion/adhesion of sprayed
fire-resistive materials applied to structural members
ASTM E759/E759M
Standard test method for effect of deflection on sprayed
fire-resistive material applied to structural members
ASTM E760/E760M
Standard test method for effect of impact on bonding of
sprayed fire-resistive material applied to structural
members
ASTM E761/E761M
Standard test method for compressive strength of
sprayed fire-resistive material applied to structural
members
ASTM E774
Standard specification for the classification
durability of sealed insulating glass units
ASTM E2068
Standard test method for determination of operating
force of sliding windows and doors
ASTM E2178
Standard test method for air permeance of building
materials
ASTM E2273
Standard test method for determining the drainage
efficiency of exterior insulation and finish systems (EIFS)
clad wall assemblies
ASTM E2357
Standard test method for determining air leakage of air
barrier assemblies
ASTM F476
Standard test methods for security of swinging door
assemblies
ASTM F588
Standard test methods for measuring the forced entry
resistance of window assemblies, excluding glazing
impact
ASTM F842
Standard test methods for measuring the forced entry
resistance of sliding door assemblies, excluding glazing
impact
ASTM F970
Standard test method for static load limit
TL-271
Intertek Testing Services NA, Inc.
of
the
Page 15 of 20
ASTM F1080
Standard test method for determining the consistency of
viscous liquids using a consistometer
ASTM F1577
Standard test methods for detention locks for swinging
doors
ASTM G154
Standard practice for operating fluorescent ultraviolet
(UV) lamp apparatus for exposure of nonmetallic
materials
ASTM G155
Standard practice for operating xenon arc light apparatus
for exposure of non-metallic materials
CPSC 16 CFR 1201
Commercial practices – consumer product safety
commission – consumer product safety act regulations –
safety standard for architectural glazing materials
DIN/EN 1096-2
Glass in building - coated glass - part 2: requirements
and test methods for class A, B and S coatings
ICC ES AC07
Special roofing systems (test methods referenced in
section 4.5)
ICC ES AC39
Walking decks (test methods referenced in section 5.0)
ICC ES AC174
Deck board span ratings and guardrail systems (guards
and handrails) (test methods referenced in sections 3.0,
4.0 and 5.0)
ICC ES AC212
Water-resistive coatings used as water-resistive barriers
over exterior sheathing (test methods referenced in
sections 3.0 and 4.0)
ICC ES EG356
Evaluation guidelines for a moisture drainage system
used with exterior wall veneers (except section 3.1.6)
MIL-STD-1678-3
Fiber
optic
cabling
systems
requirements
measurements physical, mechanical, environmental
NFRC 100
Procedure for determining fenestration product U-factors
NFRC 400
Procedure
leakage
TAS 202
Criteria for testing impact and non-impact resistant
building envelope components using uniform static air
pressure
TAS 203
Criteria for testing products subject to cyclic wind
pressure loading
UL 997
Standard for safety wind resistance of prepared roof
covering materials
TL-271
Intertek Testing Services NA, Inc.
for
determining
fenestration
product
and
air
Page 16 of 20
UL 1777
Standard for chimney liners
UL 1784
Standard for air leakage tests of door assemblies and
other opening protectives
UL 2431
Standard for safety for durability of fire resistive coatings
and materials
WDMA I.S. 1-A
Industry standard for interior architectural wood flush
doors
WDMA I.S. 2 (AAMA/WDMA/CSA 101/I.S.2/A440)
North American fenestration standard for windows,
doors, and skylights
WDMA I.S. 3
Wood sliding patio doors
WDMA I.S. 4
Industry specification for preservative treatment for
millwork
WDMA I.S. 6A
Industry standard for architectural stile and rail doors
WDMA I.S. 7 (AAMA/WDMA 1600/I.S. 7)
Voluntary specification for skylights
WDMA I.S. 8
Wood swinging patio doors
WDMA I.S. 9
Wood primary entrance doors
WDMA T.M. 5
Test method to determine the split resistance of stile
edges of wood doors
WDMA T.M. 6
Adhesive durability
WDMA T.M. 7
Cycle slam test
WDMA T.M. 8
Hinge loading test
WDMA T.M. 10
Screw holding capacity
Structural
AAMA 501.4
TL-271
Intertek Testing Services NA, Inc.
Recommended static test method for evaluating curtain
wall and storefront systems subjected to seismic and
wind induced interstory drifts
Page 17 of 20
ANSI/DASMA 115
Standard method for testing sectional garage doors and
rolling doors: determination of structural performance
under missile impact and cyclic wind pressure
ANSI/DASMA 108
Standard method for testing sectional garage doors and
rolling doors: determination of structural performance
under uniform static air pressure difference
ASTM D198
Standard test methods of static tests of lumber in
structural sizes
ASTM D905
Standard test method for strength properties of adhesive
bonds in shear by compression loading
ASTM D1183
Standard practices for resistance of adhesives to cyclic
laboratory aging conditions
ASTM D1761
Standard test methods for mechanical fasteners in wood
ASTM D5764
Standard test method for evaluating dowel-bearing
strength of wood and wood-based products
ASTM E330
Standard test method for structural performance of
exterior windows, doors, skylights and curtain walls by
uniform static air pressure difference
ASTM E1233/E1233M
Standard test method for structural performance of
exterior windows, doors, skylights, and curtain walls by
cyclic air pressure differential
ASTM E1886
Standard test method for performance of exterior
windows, curtain walls, doors, and impact protective
systems impacted by missile(s) and exposed to cyclic
pressure differentials
ASTM E1996
Standard specification for performance of exterior
windows, curtain walls, doors, and impact protective
systems impacted by windborne debris in hurricanes
ASTM F1575
Standard test method for determining bending yield
moment of nails
ICC ES AC01
Expansion anchors in masonry elements (test methods
referenced in section 5.0)
ICC ES AC05
Sandwich panel adhesives (test methods referenced in
sections 5.0, 6.0, 7.0, 8.0 and 9.0)
SSTD 12
Test standard for determining impact resistance from
windborne debris (safety glazing standard FRA 223.5
appendix A, section B (excluding subsections 10 (i) and
11 (i))
TL-271
Intertek Testing Services NA, Inc.
Page 18 of 20
TAS 201
Impact test procedures
UL 580
Standard for tests for uplift resistance of roof assemblies
UL 1897
Standard for uplift tests for roof covering systems
UL 2218
Standard for impact resistance of prepared roof covering
materials
Thermal
ASTM C209
Standard test methods for cellulosic fiber insulating board
ASTM C236
Standard test method for steady-state thermal
performance of building assemblies by means of a
guarded hot box
ASTM C518
Standard test method for steady-state thermal
transmission properties by means of the heat flow meter
apparatus
ASTM C578
Standard specification
thermal insulation
ASTM C1512
Standard test method for characterizing the effect of
exposure
to
environmental
cycling
on
thermal
performance of insulation products
ASTM D6341
Standard test method for determination of the linear
coefficient of thermal expansion of plastic lumber and
plastic lumber shapes between –30 and 140°F (–34.4
and 60°C)
ASTM E537
Standard test method for the thermal stability
chemicals by differential scanning calorimetry
ICC ES AC12
Foam plastic insulation (test methods referenced in
sections 3.0 and 4.0)
for
rigid,
cellular
polystyrene
of
AAMA: American Architectural Manufacturers Association
AATCC: American Association of Textile Chemists and Colorists
ABD: Airbus Directive
AS: Australian Standard
BHMA: Builders Hardware Manufacturers Association
BSS: British Standards Society
CA TB: California Technical Bulletin
CPSC: Consumer Product Safety Commission
TL-271
Intertek Testing Services NA, Inc.
Page 19 of 20
DASMA: Doors & Access Systems Manufacturers Association
DIN: German Standard
FMVSS: Federal Motor Vehicle Safety Standards
MIL-PFR: Military Performance
MIL-STD: Military Standard
NES: Naval Engineering Standard
NFPA: National Fire Protection Association
NFRC: National Fenestration Rating Council
NZ: New Zealand Standard
TAS: Testing Application Standards (Miami-Dade County Protocol)
TO: Compendium Method U.S. Environmental Protection Agency
UBC: Uniform Building Code
UL: Underwriters Laboratories
ULC: Underwriters Laboratories Canada
WDMA: Window and Door Manufacturer Association
TL-271
Intertek Testing Services NA, Inc.
Page 20 of 20
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement