Fisher Regular, High Capacity Hopper Spreader Installation Instructions

Below you will find brief information for Hopper Spreader Regular, Hopper Spreader High Capacity. These spreaders are designed to be mounted on a truck and are used to spread salt, sand, or other ice control materials. They feature a hopper that holds the material, a conveyor system that moves the material to the spinner, and a spinner that distributes the material over a desired area. They are designed for use in a variety of weather conditions and can be used effectively to control ice and snow on roads, parking lots, and other surfaces.

PDF Download
Document
Fisher Hopper Spreader Regular, Hopper Spreader High Capacity Installation Instructions | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Hopper for material holding
  • Conveyor system
  • Spinner for material distribution
  • Adjustable choke
  • Hydraulic system
  • Safety features

Frequently asked questions

The maximum volume of spreading material for the Regular Capacity spreader is 1.6 yd³ for the 7' spreader and 1.8 yd³ for the 8' spreader.

The maximum volume of spreading material for the High Capacity spreader is 2.6 yd³ for the 8' spreader and 3.3 yd³ for the 10' spreader.

A 12-Volt battery with a minimum of 400 cold cranking amp rating is required. The battery box will accept any group 65, 64, 27, 24, or 22 series top terminal battery.
Preparing document for printing…
0%