RX-V1065 - Yamaha UK

RX-V1065 - Yamaha UK
00_RX-V1065_B_cv.fm Page 1 Tuesday, May 12, 2009 3:00 PM
B
Orbitech
OSat
Otto Versand
Pace
Pacific
Packsat
Palcom
Palladium
Palsat
Panasat
Panasonic
Panda
Pansat
Patriot
Paysat
PCT
Philco
Philips
Phoenix
Phonotrend
Pioneer
Polsat
Predki
Premiere
Priesner
Primestar
Profile
Promax
Prosat
Proscan
Protek
Proton
Provision
Quadral
Quelle
Quiero
RadioShack
Radiola
Radix
Rainbow
RCA
Realistic
Redpoint
Redstar
4083, 4134, 4135,
4136
4086
4093
4084, 4093, 4113,
4121, 4125, 4138
4097
4138
4085
4089, 4136
4134, 4136
4140
4043, 4044, 4046,
4084, 4113, 4118,
4143, 4148
4084, 4137
4047
4138
4045
4060
4055
4021, 4022, 4045,
4084, 4101, 4103,
4111, 4115, 4135,
4138, 4150, 4152,
4153, 4155, 4156
4096
4084, 4087, 4098
4124, 4135
4102
4095
4098, 4135
4089
4030
4138
4084
4085, 4087
4015, 4016, 4040,
4151
4097
4066
4088
4074, 4085, 4087,
4090, 4138
4093, 4133, 4137
4102
4065
4101, 4103
4092, 4119
4086
4015, 4016, 4034,
4035, 4036, 4037,
4038, 4040, 4151,
4157
4028
4091
4074, 4090
RFT
Roadstar
Roch
Rover
Saba
4087, 4101, 4103
4139
4077
4074, 4139
4088, 4133, 4137,
4138
Sabre
4084
Sagem
4069, 4102
Sakura
4096
Samsung
4018, 4021, 4023,
4041, 4042, 4081,
4082, 4083, 4114,
4150, 4154
SAT
4085, 4136
Sat Cruiser
4141
Sat Partner
4083, 4086, 4088,
4095, 4099, 4136
Sat Team
4139
Satcom
4094, 4137
Satec
4139
Satelco
4074
Satford
4094
Satmaster
4094
Satplus
4134
Schneider
4090, 4134, 4138
Schwaiger
4097, 4134, 4137
SCS
4133
Seemann
4089, 4091, 4092
SEG
4074, 4083, 4090,
4095
Seleco
4098
Servi Sat
4077, 4139
Siemens
4093
Silva
4099
Skantin
4139
Skardin
4091
Skinsat
4136
SKR
4139
Skymaster
4067, 4068, 4087,
4134, 4139
Skymax
4101, 4103
SkySat
4134, 4136, 4137,
4139
Skyvision
4098
SM Electronic 4134, 4139
Smart
4133, 4139
Sony
4017, 4020, 4135
SR
4089, 4100
Star Choice
4065
Starland
4139
Starring
4095
Start Trak
4083
Strong
4074, 4083, 4086,
4090, 4099, 4140
STS
4033
STVI
4077
Sumida
4089
Sunny Sound
Sunsat
Sunstar
Supermax
Tandberg
Tandy
Tantec
TCM
Techniland
TechniSat
Technology
Technosat
Technowelt
Teco
Telanor
Telasat
Telecom
Telefunken
Teleka
Telemaster
Telesat
Telestar
Televes
Telewire
Tempo
Tevion
Thomson
Thorens
Thorn
Tivax
Tivo
Tokai
Tonna
Toshiba
Triad
Triasat
Triax
Turnsat
Tvonics
Twinner
UEC
Uher
UltimateTV
Uniden
Unisat
Unitor
Universum
US Digital
4074
4139
4074, 4089, 4100
4141
4102
4086
4084
4090
4094
4071, 4072, 4073,
4092, 4103, 4116,
4117, 4134, 4135,
4136
4140
4141
4137
4089, 4100
4085
4133, 4137
4139
4067, 4083, 4138
4086, 4089, 4092,
4136, 4137
4088
4137
4134, 4135, 4136
4084, 4136
4098
4141
4090, 4139
4070, 4084, 4102,
4104, 4130, 4133,
4135, 4137, 4138,
4139
4097
4084
4058
4150
4103
4084, 4094, 4098,
4136, 4139
4144, 4152, 4153
4099
4136
4093, 4133, 4136,
4139
4139
4132
4077, 4139
4140
4134
4020
4029, 4045
4089, 4096, 4103
4095
4093, 4133, 4137
4066
Variosat
Vega
Ventana
Viewsat
Visiosat
Voom
Vortec
Welltech
WeTeKom
Wevasat
Wewa
Winersat
Wisi
Woorisat
Worldsat
Xrypton
XSat
Zehnder
Zenith
Zodiac
4093
4074
4101, 4103
4048
4095, 4098, 4138,
4139
4065
4083
4134
4134, 4136
4084
4084
4095
4084, 4092, 4093,
4136, 4137
4088
4138
4074
4139
4074, 4088, 4090,
4131, 4133
4052, 4057, 4145
4086
CD
Yamaha
RX-V1065
AV Receiver
5000, 5013
CD Recoder
Yamaha
5001
MD
Yamaha
5002, 5003, 5004
Tape
Yamaha
5005, 5006
Tuner
Yamaha
5007, 5008, 5009,
5010, 5014, 5015,
5016, 5017, 5018
USB
Yamaha
5012, 5021
DOCK
Yamaha
5011, 5022
LD
Yamaha
2002
OWNER’S MANUAL
© 2009 Yamaha Corporation All rights reserved.
Black process 45.0° 240.0 LPI
Printed in Malaysia
WQ94970
Caution: Read this before operating your unit.
1 To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
2 Install this sound system in a well ventilated, cool, dry, clean
place – away from direct sunlight, heat sources, vibration,
dust, moisture, and/or cold. Allow ventilation space of at least
30 cm on the top, 20 cm on the left and right, and 20 cm on
the back of this unit.
3 Locate this unit away from other electrical appliances, motors,
or transformers to avoid humming sounds.
4 Do not expose this unit to sudden temperature changes from
cold to hot, and do not locate this unit in an environment with
high humidity (i.e. a room with a humidifier) to prevent
condensation inside this unit, which may cause an electrical
shock, fire, damage to this unit, and/or personal injury.
5 Avoid installing this unit where foreign objects may fall onto
this unit and/or this unit may be exposed to liquid dripping or
splashing. On the top of this unit, do not place:
– Other components, as they may cause damage and/or
discoloration on the surface of this unit.
– Burning objects (i.e. candles), as they may cause fire,
damage to this unit, and/or personal injury.
– Containers with liquid in them, as they may fall and liquid
may cause electrical shock to the user and/or damage to
this unit.
6 Do not cover this unit with a newspaper, tablecloth, curtain,
etc. in order not to obstruct heat radiation. If the temperature
inside this unit rises, it may cause fire, damage to this unit,
and/or personal injury.
7 Do not plug in this unit to a wall outlet until all connections
are complete.
8 Do not operate this unit upside-down. It may overheat,
possibly causing damage.
9 Do not use force on switches, knobs and/or cords.
10 When disconnecting the power cable from the wall outlet,
grasp the plug; do not pull the cable.
11 Do not clean this unit with chemical solvents; this might
damage the finish. Use a clean, dry cloth.
12 Only voltage specified on this unit must be used. Using this
unit with a higher voltage than specified is dangerous and may
cause fire, damage to this unit, and/or personal injury. Yamaha
will not be held responsible for any damage resulting from use
of this unit with a voltage other than specified.
13 To prevent damage by lightning, keep the power cord and
outdoor antennas disconnected from a wall outlet or the unit
during a lightning storm.
14 Do not attempt to modify or fix this unit. Contact qualified
Yamaha service personnel when any service is needed. The
cabinet should never be opened for any reasons.
15 When not planning to use this unit for long periods of time
(i.e. vacation), disconnect the AC power plug from the wall
outlet.
16 Install this unit near the AC outlet and where the AC power
plug can be reached easily.
17 Be sure to read the “Troubleshooting” section on common
operating errors before concluding that this unit is faulty.
18 Before moving this unit, press KMAIN ZONE ON/OFF to
set this unit to the standby mode, and disconnect the AC
power plug from the wall outlet in the main room.
19 VOLTAGE SELECTOR (Asia and General models only)
The VOLTAGE SELECTOR on the rear panel of this unit
must be set for your local main voltage BEFORE plugging
into the AC wall outlet. Voltages are:
..... AC 110/120/220/230-240 V, 50/60 Hz (General model)
.........................AC 220/230-240 V, 50/60 Hz (Asia model)
20 The batteries shall not be exposed to excessive heat such as
sunshine, fire or like.
21 Excessive sound pressure from earphones and headphones can
cause hearing loss.
22 When replacing the batteries, be sure to use batteries of the
same type. Danger of explosion may happen if batteries are
incorrectly replaced.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN
OR MOISTURE.
As long as this unit is connected to the AC wall outlet,
it is not disconnected from the AC power source even
if you turn off this unit by KMAIN ZONE ON/OFF.
In this state, this unit is designed to consume a very
small quantity of power.
■ For U.K. customers
If the socket outlets in the home are not suitable for the
plug supplied with this appliance, it should be cut off and
an appropriate 3 pin plug fitted. For details, refer to the
instructions described below.
Note
The plug severed from the mains lead must be destroyed, as a
plug with bared flexible cord is hazardous if engaged in a live
socket outlet.
■ Special Instructions for U.K. Model
IMPORTANT
THE WIRES IN MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
Blue: NEUTRAL
Brown: LIVE
As the colours of the wires in the mains lead of this apparatus
may not correspond with the coloured markings identifying
the terminals in your plug, proceed as follows:
The wire which is coloured BLUE must be connected to the
terminal which is marked with the letter N or coloured
BLACK. The wire which is coloured BROWN must be
connected to the terminal which is marked with the letter L or
coloured RED.
Making sure that neither core is connected to the earth
terminal of the three pin plug.
Caution-i En
Information for Users on Collection and Disposal of Old Equipment and used Batteries
These symbols on the products, packaging, and/or accompanying documents mean that used electrical
and electronic products and batteries should not be mixed with general household waste.
For proper treatment, recovery and recycling of old products and used batteries, please take them to
applicable collection points, in accordance with your national legislation and the Directives 2002/96/
EC and 2006/66/EC.
By disposing of these products and batteries correctly, you will help to save valuable resources and
prevent any potential negative effects on human health and the environment which could otherwise
arise from inappropriate waste handling.
For more information about collection and recycling of old products and batteries, please contact your
local municipality, your waste disposal service or the point of sale where you purchased the items.
[Information on Disposal in other Countries outside the European Union]
These symbols are only valid in the European Union. If you wish to discard these items, please contact
your local authorities or dealer and ask for the correct method of disposal.
Note for the battery symbol (bottom two symbol examples):
This symbol might be used in combination with a chemical symbol. In this case it complies with the
requirement set by the Directive for the chemical involved.
Limited Guarantee for European Economic Area (EEA) and Switzerland
Thank you for having chosen a Yamaha product. In the unlikely event that your Yamaha product needs guarantee service, please contact the dealer from
whom it was purchased. If you experience any difficulty, please contact Yamaha representative office in your country. You can find full details on our
website (http://www.yamaha-hifi.com/ or http://www.yamaha-uk.com/ for U.K. resident).
The product is guaranteed to be free from defects in workmanship or materials for a period of two years from the date of the original purchase. Yamaha
undertakes, subject to the conditions listed below, to have the faulty product or any part(s) repaired, or replaced at Yamaha’s discretion, without any charge
for parts or labour. Yamaha reserves the right to replace a product with that of a similar kind and/or value and condition, where a model has been
discontinued or is considered uneconomic to repair.
Conditions
1. The original invoice or sales receipt (showing date of purchase, product code and dealer’s name) MUST accompany the defective product, along with a
statement detailing the fault. In the absence of this clear proof of purchase, Yamaha reserves the right to refuse to provide free of charge service and the
product may be returned at the customer’s expense.
2. The product MUST have been purchased from an AUTHORISED Yamaha dealer within the European Economic Area (EEA) or Switzerland.
3. The product must not have been the subject of any modifications or alterations, unless authorised in writing by Yamaha.
4. The following are excluded from this guarantee:
a. Periodic maintenance and repair or replacement of parts due to normal wear and tear.
b. Damage resulting from:
(1) Repairs performed by the customer himself or by an unauthorised third party.
(2) Inadequate packaging or mishandling, when the product is in transit from the customer. Please note that it is the customer’s responsibility to
ensure the product is adequately packaged when returning the product for repair.
(3) Misuse, including but not limited to (a) failure to use the product for its normal purpose or in accordance with Yamaha’s instructions on the proper
use, maintenance and storage, and (b) installation or use of the product in a manner inconsistent with the technical or safety standards in force in
the country where it is used.
(4) Accidents, lightning, water, fire, improper ventilation, battery leakage or any cause beyond Yamaha’s control.
(5) Defects of the system into which this product is incorporated and/or incompatibility with third party products.
(6) Use of a product imported into the EEA and/or Switzerland, not by Yamaha, where that product does not conform to the technical or safety
standards of the country of use and/or to the standard specification of a product sold by Yamaha in the EEA and/or Switzerland.
(7) Non AV (Audio Visual) related products.
(Products subject to “Yamaha AV Guarantee Statement” are defined in our website at http://www.yamaha-hifi.com/ or
http://www.yamaha-uk.com/ for U.K. resident.)
5. Where the guarantee differs between the country of purchase and the country of use of the product, the guarantee of the country of use shall apply.
6. Yamaha may not be held responsible for any losses or damages, whether direct, consequential or otherwise, save for the repair or replacement of the
product.
7. Please backup any custom settings or data, as Yamaha may not be held responsible for any alteration or loss to such settings or data.
8. This guarantee does not affect the consumer’s statutory rights under applicable national laws in force or the consumer’s rights against the dealer arising
from their sales/purchase contract.
Caution-ii En
Contents
INTRODUCTION
Front panel ................................................................. 4
Rear panel .................................................................. 5
Front panel display..................................................... 6
Remote control........................................................... 7
Quick start guide..................................................... 8
L
Preparing remote control ....................................... 9
Installing batteries in the remote control ................... 9
Using the remote control............................................ 9
Connections ...........................................................10
Optimizing the speaker setting for your
listening room (YPAO) ..................................... 20
BASIC OPERATION
Playback.................................................................23
Enjoying the sound field programs .....................26
ADVANCED OPERATION
Setting the option menu for each input source
(Option menu)................................................... 39
Option menu items................................................... 39
Selecting a video signal to be output during an
audio reproduction............................................... 41
Editing surround decoders/
sound field programs........................................ 42
Setting sound field parameters................................. 42
Sound field parameters ............................................ 42
Operating various settings for this unit
(Setup menu) ..................................................... 46
Basic operation of the Setup menu .......................... 47
Speaker Setup .......................................................... 47
Sound Setup ............................................................. 49
Function Setup ......................................................... 50
DSP Parameter......................................................... 52
Memory Guard......................................................... 52
Using multi-zone configuration ........................... 53
Connecting Zone2.................................................... 53
Controlling Zone2.................................................... 54
Controlling other components with the remote
control................................................................ 55
Setting remote control codes.................................... 55
Resetting all remote control codes........................... 55
Programming from other remote controls ............... 56
Advanced setup..................................................... 57
APPENDIX
Troubleshooting.................................................... 59
Glossary ................................................................. 68
Sound field program information ....................... 70
Information on HDMI™...................................... 71
Specifications......................................................... 72
Index ...................................................................... 73
(at the end of this manual)
Information about software.................................... i
List of remote control codes................................... ii
APPENDIX
Selecting sound field programs................................ 26
Enjoying unprocessed input sources
(Straight decode mode)........................................ 29
Enjoying sound field programs without surround
speakers (Virtual CINEMA DSP) ....................... 29
Enjoy sound field programs with headphones
(SILENT CINEMA™) ........................................ 29
Using CINEMA DSP 3D mode ............................... 29
ADDITIONAL
INFORMATION
Basic procedure........................................................ 23
Using the SCENE function ...................................... 23
Selecting a source on the GUI screen ...................... 24
Muting audio output................................................. 24
Adjusting high/low frequency sounds
(tone control) ....................................................... 24
Enjoying pure hi-fi sound ........................................ 24
Using your headphones............................................ 25
Displaying input signal information ........................ 25
Changing information on the front panel display .... 25
Using the sleep timer ............................................... 38
Using the HDMI™ control function........................ 38
ADVANCED
OPERATION
Using Auto Setup..................................................... 20
When an error message is displayed during
measurement........................................................ 22
When a warning message is displayed after
measurement........................................................ 22
Playback of the USB storage device........................ 37
Other functions ..................................................... 38
BASIC
OPERATION
Placing speakers....................................................... 10
Connecting speakers ................................................ 11
Information on jacks and cable plugs ...................... 13
Connecting a TV monitor or projector .................... 14
Connecting other components ................................. 15
Connecting a Yamaha iPod universal dock or
Bluetooth™ wireless audio receiver.................... 17
Connecting a USB storage device ........................... 18
Using the VIDEO AUX jacks.................................. 18
Connecting the FM and AM antennas ..................... 18
Connecting the power cable..................................... 19
Turning this unit on and off ..................................... 19
Using USB storage devices................................... 37
PREPARATION
PREPARATION
Pairing the Bluetooth™ wireless audio receiver
and your Bluetooth component............................ 36
Playback of the Bluetooth™ component ................. 36
INTRODUCTION
Features.................................................................... 2
About this manual................................................... 3
Supplied accessories................................................ 3
Part names and functions....................................... 4
Using Bluetooth™ components ........................... 36
FM/AM tuning ...................................................... 30
Tuning in to the desired FM/AM station
(Frequency tuning) .............................................. 30
Registering FM/AM stations and tuning in
(Preset tuning)...................................................... 30
Radio Data System tuning....................................32
English
Displaying the Radio Data System information ...... 32
Selecting the Radio Data System program type
(PTY Seek) .......................................................... 32
Using the enhanced other networks (EON) data
service.................................................................. 33
Using iPod™ ..........................................................34
Controlling iPod™................................................... 34
1 En
INTRODUCTION
Features
■ Built-in 7-channel power amplifier
• Minimum RMS Output Power (20 Hz to 20 kHz, 0.08%
THD, 8 Ω)
• FRONT L/R: 105 W + 105 W
• CENTER: 105 W
• SURROUND L/R: 105 W + 105 W
• SURROUND BACK L/R: 105 W + 105 W
■ Speaker/Preout outputs
• Speaker terminals (7-channel), extra speaker terminals
(2-channel for presence or Zone2), preout jacks (7.1channel)
■
Input/Output terminals
Input terminals
• HDMI input x 4
• Audio/Visual input
[Audio] Digital input (coaxial) x 2, digital input
(optical) x 2, analog input x 2
[Video] Component video x 2, S-video x 1, Video x 4
• Audio input (analog) x 2
• Phono input (analog) x 1
• Multi-channel audio input (7.1-channel)
• V-AUX input
[Audio] Analog x 1
[Video] Video x 1
• DOCK terminal to connect a Yamaha iPod universal
dock (such as YDS-11, sold separately) or Bluetooth
wireless audio receiver (such as YBA-10, sold
separately)
• USB port to connect a USB storage device
Output terminals
• Monitor output
[Audio/Video] HDMI x 1
[Video] Component video x 1, Video x 1
• Audio/Visual output
[Audio] Analog x 1
[Video] Video x 1
• Audio output
Analog x 1
• Zone2 output
Analog x 1
Other terminals
Remote input x 1, Remote output x 1
Trigger output x 1
■
•
•
•
•
Proprietary Yamaha technology for the
creation of sound fields
CINEMA DSP 3D
Compressed Music Enhancer mode
Virtual CINEMA DSP
SILENT CINEMA
2 En
■ Digital audio decoders
• Dolby TrueHD, Dolby Digital Plus decoder
• DTS-HD Master Audio, DTS-HD High Resolution
Audio, DTS Express
• Dolby Digital/Dolby Digital EX decoder
• DTS, DTS 96/24 decoder, DTS-ES Matrix 6.1, DTS-ES
Discrete 6.1
• Dolby Pro Logic/Dolby Pro Logic II/Dolby Pro Logic
IIx decoder
• DSD decoder
• DTS NEO:6 decoder
■ Sophisticated FM/AM tuner
• 40-station random and direct preset tuning
• Automatic preset tuning
• Radio Data System tuning
■ HDMI™ (High-Definition Multimedia Interface)
• HDMI interface for standard, enhanced or highdefinition video as well as multi-channel digital audio.
– Automatic audio and video synchronization (lip sync)
information capability
– Deep Color video signal (30/36 bit) transmission
capability
– “x.v.Color” video signal transmission capability
– High refresh rate and high resolution video signals
capability
– High definition digital audio format signals capability
• Analog to analog and HDMI digital video upconversion (video ↔ component video → HDMI)
capability for monitor out
• Analog video input up-scaling for HDMI digital video
output 480i(576i) or 480p(576p) → 720p, 1080i or 1080p
• HDMI control function supported
■ Automatic speaker setup features
• “YPAO” (Yamaha Parametric Room Acoustic
Optimizer) for automatically optimizing speaker
outputs suitable for listening environments.
■ Other features
• 192-kHz/24-bit D/A converter
• GUI (graphic user interface) menus to optimize this unit
to suit individual audiovisual system
• iPod and USB file browsing and album art display
capability
• Pure Direct mode for pure hi-fi sound for all sources
• Adaptive dynamic range controlling capability
• SCENE function for changing input sources and sound
field programs with one key
• Bi-amplification connection capability
• Sleep timer
• Multi-zone function
About this manual
Bluetooth™
Manufactured under license from Dolby Laboratories.
Dolby, Pro Logic and the double-D symbol are trademarks of Dolby
Laboratories
“HDMI”, the “HDMI” logo and “High-Definition Multimedia
Interface” are trademarks, or registered trademarks of HDMI
Licensing LLC.
x.v.Color
BASIC
OPERATION
Manufactured under license under U.S. Patent No’s:
5,451,942;5,956,674;5,974,380;5,978,762;6,226,616;6,487,535 &
other U.S. and worldwide patents issued & pending. DTS is a
registered trademark and the DTS logos, Symbol, DTS-HD and DTSHD Master Audio are trademark of DTS, Inc. © 1996-2007 DTS, Inc.
All Rights Reserved.
PREPARATION
Bluetooth is a registered trademark of Bluetooth SIG and is used by
Yamaha in accordance with a license agreement.
INTRODUCTION
• Some operations can be performed by using either the keys on the front panel or the ones on the remote control. In case the key names differ between
the front panel and the remote control, the key name on the remote control is given in parentheses.
• This manual is printed prior to production. Design and specifications are subject to change in part as a result of improvements, etc. In case of
differences between the manual and product, the product has priority.
• For better viewing, we increase the size of characters used in example screen images in this manual. Therefore the size ratio of characters to other
objects (such as icons) may be different from that of the actual display image.
• “KMAIN ZONE ON/OFF” or “dHDMI 1” (example) indicates the name of the parts on the front panel or the remote control. Refer to the
attached sheet or “Part names and functions” (page 4).for the information about each position of the parts.
• ☞ indicates the page describing the related information.
• y indicates a tip for your operation.
“x.v.Color” is a trademark of Sony Corporation.
“SILENT CINEMA” is a trademark of Yamaha Corporation.
iPod™
“iPod” is a trademark of Apple Inc., registered in the U.S. and other
countries.
ADVANCED
OPERATION
Supplied accessories
ADDITIONAL
INFORMATION
Check that you received all of the following parts.
• Remote control (page 7)
• Batteries (2) (AAA, R03, UM-4) (page 9)
• Optimizer microphone (page 20)
• AM loop antenna (page 18)
• Indoor FM antenna (page 18)
APPENDIX
English
3 En
Part names and functions
Front panel
A BC
D
E
F
G
H
I
J
HDMI THROUGH
VOLUME
ZONE2
ON/OFF
ZONE2
CONTROL
INFO
l
MEMORY
PRESET
h
FM
l
AM
TUNING
h
SCENE
BD/DVD
TV
RADIO
CD
INPUT
PROGRAM
MAIN ZONE
PHONES
TONE CONTROL
PURE DIRECT
STRAIGHT
VIDEO AUX
OPTIMIZER MIC
USB
ON/OFF
EFFECT
SILENT CINEMA
K
A
L
M
N
O
ZONE2 ON/OFF
P
Q
HDMI THROUGH
Lights up in the following cases while this unit is on standby.
• when the HDMI control function is on
• when the HDMI signal standby-through function is currently
working
C
PROGRAM selector
O
STRAIGHT
D
E
MEMORY
F
PRESET l / h
Registers FM/AM stations as preset stations (page 31).
P
FM/AM
Q
TUNING l / h
I
Front panel display
Changes FM/AM frequencies.
Displays information on this unit (page 6).
J
VOLUME control
K
MAIN ZONE ON/OFF
L
PHONES jack
M
TONE CONTROL
Controls the volume of this unit (page 23).
Turns this unit on and off (page 19).
For plugging headphones (page 25).
Adjusts high-frequency/low-frequency output of speakers
(page 24).
4 En
V
SCENE
PURE DIRECT
Changes mode to Pure Direct mode (page 24). This key lights up
when Pure Direct mode is on.
R
INPUT selector
S
OPTIMIZER MIC jack
Selects an input source (page 23).
For connecting the supplied optimizer microphone and adjusting
output characteristics of speakers (page 20).
T
VIDEO (VIDEO AUX) jack
For connecting the video output cable of a camcorder or game
console (page 18).
U
Change the tuner bands between FM and AM.
H
U
Switches between linked sets of input sources and sound field
programs (page 23).
Selects an FM/AM preset station (page 31).
G
T
Toggles between the selected sound field program and straight
decode mode (page 29).
INFO
Changes information (input, DSP program, audio decoder, etc)
displayed on the front panel display (page 25).
AUDIO
Changes sound field programs (page 26).
ZONE2 CONTROL
Enables operation of a receiver set in Zone2, including input
source switching, volume control and tuner operation, with the
main amplifier or remote control after this key is pressed
(page 54).
S
N
Switches the zone function on and off (page 54).
B
R
VIDEO
AUDIO L/R (VIDEO AUX) jack
For connecting the audio output cable of a camcorder or game
console (page 18).
V
USB port
For connecting a USB memory device or USB portable audio
player (page 18)
Part names and functions
Rear panel
b c
d
DOCK
HDMI 2
HDMI 1
HDMI OUT
e
f
INTRODUCTION
a
HDMI 4
HDMI 3
(BD/DVD)
EXTRA SP ZONE2/PRESENCE
PHONO
COMPONENT
VIDEO
ANTENNA
S VIDEO
UNBAL.
FM
GND
SPEAKERS
MONITOR OUT
COMPONENT
VIDEO
AM
SINGLE
REMOTE
PR
IN
GND
PREPARATION
PR
OUT
PB
VIDEO
PB
VIDEO
Y
Y
12V
0.1A MAX.
TRIGGER OUT
FRONT
CENTER
OPTICAL
COAXIAL
COAXIAL
AV 2
AV 3
( TV )
AV 1
OPTICAL
(CD)
AV 4
AV 5
AV 6
SINGLE
a
h
FRONT
AUDIO1
AUDIO2
i
SURROUND
SUR.BACK
SUBWOOFER
MULTI CH INPUT
j
DOCK terminal
AUDIO
OUT
k l
j
For connecting an optional Yamaha iPod universal dock (YDS11) or Bluetooth wireless audio receiver (YBA-10) (page 17).
b
PHONO jacks
k
REMOTE IN/OUT jacks
1 SUBWOOFER 2
m
MULTI CH INPUT jacks
AUDIO OUT jacks
ZONE2 OUT jacks
Outputs sound of this unit to an external amplifier set in a
different zone (page 53).
m
PRE OUT jacks
Outputs multi-channel signals from up to 7.1 channels to an
external amplifier (page 17).
TRIGGER OUT jack
For connecting an external terminal with a trigger input terminal
to operate it linked with operation of this unit. For example,
when an electric screen that supports a trigger input is
connected, it opens and closes linked with operation of an input
source selected in this unit.
d
ADDITIONAL
INFORMATION
For connecting an external component that supports the remote
control function (page 17).
SUR. BACK
PRE OUT
ADVANCED
OPERATION
l
MONITOR OUT jacks
Outputs visual signals from this unit to a video monitor, such as
a TV (page 14).
SURROUND
Outputs audio signals from a selected analog input source to an
external component (page 15).
ANTENNA terminals
For connecting supplied FM and AM antennas (page 18).
FRONT
For connecting a player that supports a multi-channel output
(page 16).
For connecting a turntable (page 15).
c
ZONE2
OUT
CENTER
BASIC
OPERATION
g
AV
OUT
SURROUND BACK/
BI-AMP
SURROUND
CENTER
HDMI OUT/HDMI 1-4 jacks
For connecting an HDMI-compatible video monitor or external
components for HDMI inputs 1-4 (pages 14 and 15).
e
APPENDIX
SPEAKERS terminals
For connecting front, center, surround and surround back
speakers (page 11). Connect the presence speakers (page 11) or
the speakers for Zone2 (page 53) to EXTRA SP terminals.
f
Power cable
g
AV 1-6 jacks
Connect this cable to an AC wall outlet (page 19).
For connecting external components for audio/visual inputs 1-6
(page 15).
h
AV OUT jacks
i
English
Outputs audio/visual signals from a selected analog input source
to an external component (page 15).
AUDIO 1/2 jacks
For connecting external components for audio inputs 1-2
(page 15).
5 En
Part names and functions
Front panel display
a
b
c
d
e
f
g
SLEEP
ZONE
2
STEREO
3 TUNED
h
VOL.
MUTE
SW
PL
PR
C
L
R
SL
SR
SBL SB SBR
i
a
b
j
HDMI indicator
h
VOLUME indicator
Lights up during normal communication when HDMI is
selected as an input source.
i
Cursor indicators
d
Tuner indicator
Lights up during receiving radio broadcast signals from an FM/
AM station (page 30).
e
ZONE2 indicator
f
SLEEP indicator
Lights up when Zone2 is turned on.
Lights up when the sleep timer is activated (page 38).
g
Light up if corresponding cursors on the remote control are
available for operations.
j
Multi information display
k
Speaker indicators
CINEMA DSP 3D indicator
Lights up when CINEMA DSP 3D is activated.
MUTE indicator
Flashes when audio is muted.
6 En
k
Displays volume levels.
CINEMA DSP indicator
Lights up when a sound field program that uses CINEMA DSP
is selected.
c
i
Displays menu items and settings for the current operation.
Indicate speaker terminals from which signals are currently
output.
Subwoofer
Presence L
Front L
Surround L
Surround back L
SW
PL
PR
C
L
R
SL
SR
SBL SB SBR
Center
Presence R
Front R
Surround R
Surround back R
Surround back
Part names and functions
Remote control
d
ZONE2
CODE SET
TRANSMIT
POWER
SOURCE
POWER
SLEEP
o
p
HDMI
2
3
4
3
4
TUNER
MULTI
q
AV
1
2
e
AUDIO
d
5
6
1
2
V-AUX
PHONO
USB
DOCK
TUNER
FM
MULTI
f
AM
PRESET
f
FM/AM
MEMORY
PRESET k / n
TUNING k / n
INFO
MEMORY
MOVIE
MUSIC
TUNING
STEREO
g
Sound selection keys
h
SCENE
Selects sound field programs (page 26).
STRAIGHT PURE DIRECT
SCENE
h
TV
CD
ON SCREEN
OPTION
VOLUME
ENTER
i
ON SCREEN
s
j
Cursors k / n / l / h Select menu items or change
t
TOP
MENU
MENU
MUTE
u
REC
2
3
4
5
6
7
8
9
0
10
l
Numeric keys
m
TV control keys
n
TRANSMIT
o
CODE SET
Enter numbers.
Enables operations of a TV or a projector (page 55).
Lights up when a signal is output from the remote control.
POWER
TV VOL
TV CH
MUTE
External component operation keys
Operate recording, playback etc. of external components
(page 55).
ENT
TV
INPUT
k
settings.
Confirms a selected item.
Returns to the previous screen or
ends the menu display.
ADDITIONAL
INFORMATION
1
m
ENTER
RETURN
DISPLAY
RETURN
l
r
Displays the GUI screen (page 24).
j
k
Switches between linked sets of input sources and sound field
programs (page 23).
RADIO
ADVANCED
OPERATION
i
BD
DVD
INFO
Changes the information shown on the front panel display
(page 25).
ENHANCER SUR. DECODE
g
Switches a band between FM and AM.
Presets radio stations.
Selects a preset station.
Changes FM/AM frequencies.
BASIC
OPERATION
e
Tuner keys
PREPARATION
1
Selects HDMI inputs 1 through 4.
Selects AV inputs 1 through 6.
Selects AUDIO inputs 1 and 2.
Selects a signal input from the VIDEO AUX jacks.
Selects a signal input from the PHONO jacks.
Selects a USB device connected to the USB port.
Selects a Yamaha iPod universal dock/Bluetooth
wireless audio receiver connected to the DOCK
terminal.
Selects the FM/AM tuner.
Selects a signal input from the MULTI CH
INPUT jacks.
INTRODUCTION
MAIN
b
c
HDMI 1-4
AV 1-6
AUDIO 1/2
V-AUX
PHONO
USB
DOCK
n
a
Input selection keys
Sets remote control codes for external component operations
(page 55).
POWER
q
SLEEP
r
OPTION
s
VOLUME +/–
t
DISPLAY
APPENDIX
p
Switches this unit on and standby (page 19).
Switches the sleep timer operations (page 38).
Displays the Option menu (page 39).
Adjust the volume of this unit (page 23).
Remote control signal transmitter
b
MAIN/ZONE2
Transmits infrared signals.
Switches amplifiers (Main or Zone2) to be operated by the
remote control (page 54).
c
SOURCE POWER
Displays the play information on the video monitor.
When an iPod is connected: Changes the operation mode of the
iPod connected to the Yamaha iPod universal dock (page 34).
u
MUTE
Turns the mute function on and off (page 24).
Switches an external component on and off.
7 En
English
a
Quick start guide
When you use this product for the first time, perform setup following the steps below. See the related pages for details on
operations and settings.
Step 1: Prepare items for setup
Step 2: Set up your speakers
Prepare speakers, DVD player, cables, and other items
necessary for setup.
For example, prepare the following items for setting up a
7.1-channel sound system.
Front right speaker
Video monitor
• Placing speakers
• Connecting speakers
☞P. 10
☞P. 11
y
Subwoofer
Front left
speaker
Place your speakers in the room and connect them to this
unit.
Surround right speaker
• This unit has a YPAO (Yamaha Parametric Room Acoustic Optimizer)
that automatically optimizes this unit based on room acoustic
characteristics (audio characteristics of the speakers, speaker positions,
and room acoustics, etc.).
You can enjoy good balanced sound without special knowledge by using
the YPAO technology (☞P. 20).
Step 3: Connect your components
Connect your TV, DVD player, or other components.
Center
speaker
Surround Back
right speaker
Components
(such as DVD player)
Surround Back
left speaker
Surround left speaker
Requirements
Speakers
qty.
Front speaker
2
Center speaker
1
Surround speaker
2
Surround back
speaker
2
Active subwoofer
1
Speaker cable
7
Subwoofer cable
1
Reproduction component such as DVD player
1
Video monitor such as TV
1
Video cable or HDMI cable
2
Audio cable
2
y
• Prepare two magnetically shielded speakers (for front). The priority of
the requirement of other speakers is as follows:
1 Two surround speakers
2 One center speaker
3 One (or two) surround back speaker(s)
• If your video monitor is a CRT, we recommend that you use magnetically
shielded speakers.
• Video and audio cables are unnecessary if you use HDMI cables.
8 En
• Connecting a TV monitor or projector
• Connecting other components
• Connecting a multi-format player or an
external decoder
• Connecting an external amplifier
• Connecting a USB storage device
• Connecting a Yamaha iPod universal dock or
Bluetooth wireless audio receiver
• Connecting the FM and AM antennas
☞P. 14
☞P. 15
☞P. 16
☞P. 17
☞P. 18
☞P. 17
☞P. 18
Step 4: Turn on the power
Connect the power cable and turn on this unit.
• Connecting the power cable
• Turning this unit on and off
☞P. 19
☞P. 19
Step 5: Select the input source and start
playback
Select the component connected in step 3 as an input
source and start playback.
• Basic procedure
• Selecting sound field programs
☞P. 23
☞P. 26
y
• This unit supports the SCENE function (page 23) that changes the input
source and sound field program at one time. Four scenes are preset for
different purposes for Blu-ray disc, DVD and CD, and you can select
from a scene from those just by pressing a remote control key.
PREPARATION
Preparing remote control
1
Using the remote control
The remote control transmits a directional infrared ray. Be
sure to aim the remote control directly at the remote
control sensor on this unit during operation.
3
Remote control sensor window
PREPARATION
2
within 6 m (20 ft)
2
Insert the two supplied batteries (AAA, R03,
UM-4) according to the polarity markings (+
and –) on the inside of the battery
compartment.
Snap the battery compartment cover back
into place.
Notes
Notes
• Do not spill water or other liquids on the remote control.
• Do not drop the remote control.
• Do not leave or store the remote control in the following conditions:
– places of high humidity, such as near a bath
– places of high temperatures, such as near a heater or stove
– places of extremely low temperatures
– dusty places
y
• You can operate external components with this remote control by setting
the remote control code (page 55).
ADDITIONAL
INFORMATION
APPENDIX
• Change all batteries if you notice the following conditions:
– the operation range of the remote control narrows
– the transmit indicator does not flash or is dim
• Do not use old batteries together with new ones.
This may shorten the life of the new batteries or cause old batteries
to leak.
• Do not use different types of batteries (such as alkaline and
manganese batteries) together. Specification of batteries may be
different even though they look the same.
• If you find leaking batteries, discard the batteries immediately,
taking care not to touch the leaked material. If the leaked material
comes into contact with your skin or gets into your eyes or mouth,
rinse it away immediately and consult a doctor. Clean the battery
compartment thoroughly before installing new batteries.
• Dispose of the old batteries correctly in accordance with your local
regulations.
• If the remote control is without batteries for more than 2 minutes,
or if exhausted batteries remain in the remote control, the contents
of the memory may be cleared. In such a case, install new batteries
and set the remote control code.
30
ADVANCED
OPERATION
Take off the battery compartment cover.
30
BASIC
OPERATION
1
3
INTRODUCTION
Installing batteries in the remote
control
English
9 En
Connections
Placing speakers
This unit supports up to 7.1-channel surround. We recommended the following speaker layout in order to obtain the
optimum surround effect.
7.1-channel speaker layout
Speaker channels
C
FR
FL
SW
SW
30˚
SL
SR
60˚
80˚
SL
SR
SBL
SBR
30 cm (12 in) or more
6.1-channel speaker layout
C
FR
FL
SW
SW
SR
60˚
SL
80˚
SR
SB
5.1-channel speaker layout
C
FR
FL
SW
SW
30˚
SL
SR
60˚
SL
10 En
80˚
■ Center speaker (C)
The center speaker is for the center channel sounds
(dialog, vocals, etc.). Place it halfway between the left and
right speakers. When using a TV, place the speaker just
above or just under the center of the TV with the front
surfaces of the TV and the speaker aligned. When using a
screen, place it just under the center of the screen.
■ Surround left and right speakers (SL and SR)
The surround speakers are used for effect and surround
sounds. Place them at the rear left and rear right facing the
listening position. To obtain a natural sound flow in the
5.1-channel speaker layout, place them slightly further
back than in the 7.1-channel speaker layout.
■
30˚
SL
■ Front left and right speakers (FL and FR)
The front speakers are used for the front channel sounds
(stereo sound) and effect sounds. Place these speakers at
an equal distance from the ideal listening position. When
using a screen, the appropriate top positions of the
speakers are about 1/4 of the screen from the bottom.
SR
Surround back left and right speakers (SBL
and SBR) / Surround back speaker (SB)
The surround back left and right speakers are used for rear
effect sounds. Place them at the rear of the room facing the
listening position at least 30 cm (1 ft) away from each
other, ideally at the same distance as that between the
front left and right speakers.
In the 6.1-channel speaker layout, surround back left and
right channel sound signals are mixed down and output
from the single surround back speaker.
In the 5.1-channel speaker layout, surround back left and
right channel sound signals are output from the surround
left and right speakers.
■ Subwoofer (SW)
The subwoofer speaker is used for bass sounds and lowfrequency effect (LFE) sounds included in Dolby Digital
and DTS signals. Use a subwoofer with a built-in
amplifier, such as the Yamaha Active Servo Processing
Subwoofer System. Place it exterior to the front left and
right speakers facing slightly inward to reduce reflections
from a wall.
Connections
0.5 to 1 m (1 to 3 ft)
0.5 to 1 m (1 to 3 ft)
PL
PR
FL
FR
1.8 m
(6 ft)
1.8 m
(6 ft)
C
INTRODUCTION
■ Presence left and right speakers (PL and PR)
The presence speakers supplement the sound from the
front speakers with extra ambient effects produced by the
sound field programs (page 26). We recommend that you
use the presence speakers especially for the CINEMA
DSP sound field programs. To use the presence speakers,
connect the speakers to EXTRA SP terminals and then set
“Extra Speaker Assignment” to “Presence” (page 48).
Connecting speakers
PREPARATION
Connect your speakers to the respective terminals as follows, according to your speaker layout.
y
• Connect optional presence speakers or Zone2 speakers (page 53) to the EXTRA SP terminals.
• You can connect up to two subwoofers. When two subwoofers are connected, the same sound is output from them.
b
a
e
d
k
j
■
6.1-channel (with Zone2 speakers)
Speakers
EXTRA SP ZONE2/PRESENCE
SPEAKERS
SINGLE
E
FRONT
CENTER
SINGLE
CENTER
SUR.BACK
AUDIO
OUT
FRONT
ZONE2
OUT
SURROUND
CENTER
SUR. BACK
FRONT (L)
b Front speaker R
FRONT (R)
c Center speaker
CENTER
d Surround speaker L
SURROUND (L)
e Surround speaker R
SURROUND (R)
f Surround back speaker
SURROUND
BACK/BI-AMP (SINGLE)
h Subwoofer 1
SUBWOOFER 1
i Subwoofer 2 (optional)
SUBWOOFER 2
j Zone2 speaker L (optional)
EXTRA SP (L)
k Zone2 speaker R (optional)
EXTRA SP (R)
1 SUBWOOFER 2
PRE OUT
■
c
■
g
f
h
i
7.1-channel (with presence speakers)
Speakers
Jacks on this unit
5.1-channel (with Zone2 speakers)
Speakers
Jacks on this unit
a Front speaker L
FRONT (L)
b Front speaker R
FRONT (R)
c Center speaker
CENTER
d Surround speaker L
SURROUND (L)
FRONT (R)
e Surround speaker R
SURROUND (R)
c Center speaker
CENTER
h Subwoofer 1
SUBWOOFER 1
d Surround speaker L
SURROUND (L)
i Subwoofer 2 (optional)
SUBWOOFER 2
e Surround speaker R
SURROUND (R)
j Zone2 speaker L (optional)
EXTRA SP (L)
f Surround back speaker L
SURROUND
BACK/BI-AMP (L)
k Zone2 speaker R (optional)
EXTRA SP (R)
g Surround back speaker R
SURROUND
BACK/BI-AMP (R)
h Subwoofer 1
SUBWOOFER 1
i Subwoofer 2 (optional)
SUBWOOFER 2
j Presence speaker L (optional)
EXTRA SP (L)
k Presence speaker R (optional)
EXTRA SP (R)
English
FRONT (L)
APPENDIX
a Front speaker L
b Front speaker R
ADDITIONAL
INFORMATION
H INPUT
SUBWOOFER
SURROUND BACK/
BI-AMP
SURROUND
a Front speaker L
ADVANCED
OPERATION
2V
MAX.
T
BASIC
OPERATION
HDMI 4
HDMI 3
Jacks on this unit
11 En
Connections
Caution
• A speaker cable is a pair of insulated cables running side by side in general. One of the cables is colored differently
or striped to indicate a polarity. Connect one end of the colored/striped cable to the “+” (red) terminal of this unit
and the other end to that of your speaker, and connect one end of the other cable to the “–” (black) terminal of this
unit and the other end to that of your speaker.
• Before connecting the speakers, be sure to disconnect the power cable.
• Do not let the bare speaker wires touch each other or any metal part of this unit. This could damage this unit and/or
speakers. If the circuit shorts out, “CHECK SP WIRES!” appears on the front panel display when this unit is turned
on.
• If images on the monitor (CRT) are distorted, place the speakers away from the video monitor. If it does not work,
use magnetically shielded speakers.
• Use speakers with an impedance of 6-ohm or larger. Set speaker impedance in the advanced setup menu before
connecting the speakers (page 57). You can also use 4-ohm speakers as the front speakers when you set “SP IMP.” to
“6ΩMIN”.
■
Connecting speaker cables
1
Remove approximately 10 mm (0.4 in) of
insulation from the end of each speaker
cable and then twist bare wires of the cable
together so that they will not cause a short
circuits.
■ Using bi-amplification connections
You can make bi-amplification connections to one speaker
system which supports bi-amplification connection as
shown below. To activate the connections, set “BI-AMP”
to “ON” in the advanced setup menu (page 57).
Front speakers
Right
Left
10 mm (0.4 in)
2
Loosen the knob, insert the twisted bare
wires into the hole and then tighten the knob.
This unit
FRONT
2
Red: positive (+)
1
Black: negative (–)
3
Connecting the banana plug (Except Korea,
U.K., Europe, Russia and Asia models)
Tighten the knob and then insert the banana plug into
the end of the terminal.
Banana plug
12 En
SURROUND BACK/
BI-AMP
Caution
Before making bi-amplification connections, remove
any brackets or cables that connect a woofer with a
tweeter. Refer to the instruction manuals of speakers for
details.
When not making bi-amplification connections, make
sure that the brackets or cables are connected before
connecting the speaker cables.
Note
• You cannot use surround back speakers or extra speakers (presence and
Zone2 speakers) when bi-amplification connections are made.
Connections
Information on jacks and cable plugs
■
■
Audio jacks
Jack and cables
Analog audio jacks
(white)
To transmit conventional analog
stereo audio signals. Use stereo pin
cables. Connect red plugs to red
jacks (R) and white plugs to white
jacks (L).
(red)
To transmit coaxial digital audio
signals. Use pin cables for digital
audio signals.
(orange)
HDMI jacks
HDMI
Description
To transmit digital video and
digital audio signals. Use HDMI
cables.
HDMI
y
R
COAXIAL jacks
Jack and cables
• We recommend that you use a commercially available 19-pin HDMI
cable no longer than 5 meters (16 feet) with the HDMI logo printed on it.
• Use a conversion cable (HDMI jack ↔ DVI-D jack) to connect this unit
to other DVI components.
• You can check the potential problem about the HDMI connection
(page 40).
PREPARATION
L
Description
Video/audio jacks
INTRODUCTION
This unit has the following input and output jacks. Use jacks and cables appropriate for components that you are
connecting.
C
OPTICAL jacks
O
To transmit optical digital audio
signals. Use optical fiber cables for
optical digital audio signals.
This unit automatically converts input video signals and
outputs the signals to the HDMI OUT jack and
MONITOR OUT (COMPONENT VIDEO and
VIDEO) jacks (video conversion).
Input
OPTICAL
Output
HDMI
HDMI
COMPONENT VIDEO
COMPONENT VIDEO
ADVANCED
OPERATION
■
Video jacks
PR
Jack and cables
PB
PR
Y
PB
Y
Description
S VIDEO
VIDEO jacks
VIDEO
V
To transmit conventional
composite video signals. Use video
pin cables.
VIDEO
VIDEO
Through
Converted
S VIDEO
S
COMPONENT VIDEO
jacks
COMPONENT
VIDEO
PR
PR
ADDITIONAL
INFORMATION
(yellow)
S VIDEO jack
To transmit S-video signals that
include luminance (Y) and
Cameroonians (C) components.
Use an S-video cable.
To transmit component video
signals that include luminance (Y),
chrominance blue (PB) and
chrominance red (PR) components.
Use component video cables.
APPENDIX
(red)
PB
PB
(blue)
Y
BASIC
OPERATION
COAXIAL
Y
(green)
English
13 En
Connections
Connecting a TV monitor or projector
According to the types of video input jacks available on your video monitor (such as a TV or projector), choose one of
the connection methods as shown below. When you connect video players such as a DVD player to this unit with an
HDMI connection, connect your video monitor to this unit with an HDMI connection.
Note
• Make sure that this unit and other components are unplugged from the AC wall outlets.
Outputting TV sounds from this unit
TV, or projector
c
a
To output sound of a TV from this unit, make connection
between one of the AV 1-6 jacks of this unit and an audio
output jack of the TV.
If the TV supports an optical digital output, we
recommend that you use the AV 1 jack. Connecting to the
AV 1 jack allows you to switch an input source to the AV 1
jack with a just a single key operation using the SCENE
function (page 23).
b
Y
HDMI
PB
PR
V
TV
HDMI 2
HDMI 1
HDMI OUT
HDM
(BD/DVD)
Digital output
(optical)
PHONO
ANTENNA
S VIDEO
UNBAL.
FM
GND
MONITOR OUT
COMPONENT
VIDEO
AM
REMOTE
PR
IN
GND
OUT
VIDEO
PB
FM
Y
12V
0.1A MAX.
TRIGGER OUT
GND
AM
PR
PR
GND
PB
PB
VIDEO
Y
L
OPTICAL
AV 4
AV 5
AV 6
AV
OUT
FRONT
AUDIO1
AUDIO2
SURROUND
Y
SUR.BA
MULTI CH INPU
O
■
To connect an HDMI video monitor
OPTICAL
Jacks on components
a HDMI input
Jacks on this unit
HDMI OUT
y
• This unit supports the HDMI control function (page 38). If your TV
supports the HDMI control function, you can control this unit with the
remote control of your TV.
■
To connect component video monitor
Jacks on components
b Component video output
■
Jacks on this unit
MONITOR OUT
(COMPONENT VIDEO)
To connect composite video monitor
Jacks on components
c Video input (composite)
14 En
Jacks on this unit
MONITOR OUT (VIDEO)
COAXIAL
COAXIAL
AV 2
AV 3
( TV )
AV 1
OPTICAL
(CD)
AV 4
AV 5
AV 6
AV
OUT
AUDIO1
AUD
Connections
Connecting other components
Note
• Make sure that this unit and other components are unplugged from the AC wall outlets.
Audio input (PHONO)
Audio / video output (AV OUT)
HDMI 2
HDMI 1
HDMI OUT
HDMI 4
HDMI 3
(BD/DVD)
HDMI input
(HDMI 1-4)
PHONO
COMPONENT
VIDEO
ANTENNA
S VIDEO
UNBAL.
FM
GND
MONITOR OUT
COMPONENT
VIDEO
AM
REMOTE
PR
PR
IN
GND
PREPARATION
DOCK
INTRODUCTION
This unit has input and output terminals for respective input and output sources. You can reproduce sound and movies
from input sources selected with the front panel display or remote control.
OUT
PB
VIDEO
PB
VIDEO
Y
12V
0.1A MAX.
TRIGGER OUT
Audio / video input
(AV 1-6)
FRONT
CENTER
Audio output
(AUDIO OUT)
OPTICAL
COAXIAL
COAXIAL
AV 2
AV 3
( TV )
AV 1
OPTICAL
(CD)
AV 4
AV 5
AV 6
AV
OUT
FRONT
AUDIO1
AUDIO2
Audio input (AUDIO 1/2)
SUR.BACK
SUBWOOFER
AUDIO
OUT
ZO
O
Multi channel audio input (MULTI CH INPUT)
ADVANCED
OPERATION
■
SURROUND
MULTI CH INPUT
Audio and video player / Set-top box
Output jacks on the connected external component
External
component
External component
with component video
output
Audio/Video
Audio
Output jack
HDMI output
Optical digital output
Input sources/jacks of this unit
Input source
Input jack
HDMI 1 (BD/DVD)
HDMI 1
HDMI 2
HDMI 2
HDMI 3
HDMI 3
HDMI 4
HDMI 4
AV 1 (TV)
OPTICAL
AV 2
COAXIAL
Video
Component video
Audio
Coaxial digital output
Video
Component video output
External component
with S-video output
Audio
Video
Analog audio output
S-video output
AV 5
Analog audio
S VIDEO
External component
with composite video
output
Audio
Coaxial digital output
AV 3 (CD)
COAXIAL
Video
Composite output
Optical digital output
Video
Composite output
Audio
Analog audio output
Composite output
Audio
Analog audio output
Video
Composite output
COMPONENT VIDEO
VIDEO
AV 4
OPTICAL
VIDEO
AV 5
Analog audio
AV 6
Analog audio
VIDEO
English
Video
COMPONENT VIDEO
APPENDIX
Audio
ADDITIONAL
INFORMATION
External component
with HDMI output
Signal
BASIC
OPERATION
Y
VIDEO
15 En
Connections
y
• Input sources in parentheses are recommended to connect to the respective jacks. If your Yamaha component has the remote in/out terminal, you can
switch the input source to that component with a single key operation using the SCENE function (page 23).
• You can change the name of the input source displayed on the front panel display as necessary (page 52).
• See page 53 on how to use the ZONE2 OUT jacks.
• When you connect an external component with analog audio and component video (or composite) output jacks, connect the analog audio output to the
AUDIO 1 or AUDIO 2 jacks of this unit while making a video connection (component video or composite). Then select the video to be output when
“AUDIO 1” or “AUDIO 2” is selected as the input source (page 41).
■
Audio player
Output jacks on the connected external component
External component
Output jack
External component with optical digital
output
Optical digital output
External component with coaxial digital
output
Coaxial digital output
External component with analog audio
output
Analog audio output
Turntable
Analog audio output
Input sources/jacks of this unit
Input source
Input jack
AV 1 (TV)
OPTICAL
AV 4
OPTICAL
AV 2
COAXIAL
AV 3 (CD)
COAXIAL
AV 5
Analog audio
AV 6
Analog audio
AUDIO 1
Analog audio
AUDIO 2
Analog audio
PHONO
Analog audio
y
• We recommend connecting the coaxial digital output terminal of a CD player to the AV3 jack.
• When connecting a turntable with a low-output MC cartridge to the PHONO jacks, use an in-line boosting transformer or MC-head amplifier.
• Connect your turntable to the GND terminal of this unit to reduce noise in the signal.
About audio/video output terminals
Among the analog audio and analog video signals input to this unit via input terminals, the audio/video signals of the
selected input sources are output from the AV OUT jacks and AUDIO OUT jacks. An HDMI input signal,
COMPONENT VIDEO input signal or digital audio input signal cannot be output.
When using the AV OUT jacks: connect an external component to the VIDEO, S VIDEO or analog audio terminal.
When using the AUDIO OUT jacks: connect an external component to the analog audio terminal.
■
Connecting a multi-format player or an
external decoder
This unit is equipped with 8 additional input jacks (Front
L/R, Center, Surround L/R, Surround Back L/R and
Subwoofer) for analog multi-channel input from a multiformat player, external decoder, etc.
SURROUND
SUR.BACK
SUBWOOFER
MULTI CH INPUT
L
R
L
R
R
L
Center out
Subwoofer out
Surround
back out
Surround
out
16 En
FRONT
Front out
Notes
• When you select “MULTI CH” as the input source, the digital sound field
processor is automatically disabled.
• Since this unit does not redirect signals input at the MULTI CH INPUT
jacks to accommodate for missing speakers, connect at least a 5.1channel speaker system when using this feature.
• You can specify a video signal to be output during a multi-channel audio
reproduction (page 41). If your DVD player has analog multi-channel
output jacks, connect them to the MULTI CH INPUT jacks while making
a video connection (component video or composite).
CENTER
Multi-format player or external decoder
(7.1-channel output)
Connections
Note
• When you make connections to the PRE OUT jacks, do not make any
connections to the speaker terminals.
a
b
c
d
SINGLE
SURROUND
1 SUBWOOFER 2
SUR. BACK
PRE OUT
e
FRONT PRE OUT jacks
b
SURROUND PRE OUT jacks
c
SUR.BACK PRE OUT jacks
Front channel output jacks.
Surround channel output jacks.
Connecting a Yamaha iPod universal
dock or Bluetooth™ wireless audio
receiver
This unit has the DOCK terminal, to which you can
connect a Yamaha iPod universal dock (YDS-11, sold
separately) or a Bluetooth wireless audio receiver (YBA10, sold separately). You can play an iPod or a Bluetooth
component with this unit by connecting it to the DOCK
terminal.
Use a dedicated cable for connection between the dock/
receiver and this unit.
Surround back output jacks. When you only connect one
external amplifier for the surround back channel, connect it to
the left SUR.BACK (SINGLE) jack.
DOCK
BASIC
OPERATION
a
• If connecting a Yamaha component that supports the SCENE control
signal reception to the REMOTE OUT jack of this unit, you can start
playback on the Yamaha component by using the SCENE function
(page 23).
• If connecting a component other than Yamaha products to the REMOTE
OUT jack of this unit, set “SCENE IR” to “OFF” in the advanced setup
menu (page 57).
HDMI OUT
y
• To output surround back channel signals at these jacks, set
“Surround Speaker” to any parameter except “None” (page 48).
d
CENTER PRE OUT jack
e
SUBWOOFER PRE OUT 1/2 jack
PHONO
COMPONENT
VIDEO
ANTENNA
UNBAL.
FM
GND
A
PR
Center channel output jack.
GND
PB
HDMI 3
Y
Yamaha iPod universal dock or
Bluetooth wireless audio receiver
ADDITIONAL
INFORMATION
■ Transmitting/receiving remote control signals
When the components have the capability of the
transmission of the remote control signals, connect the
REMOTE IN and REMOTE OUT jacks to the remote
control input and output jack with the monaural analog
mini cable as follows.
HDMI 2
ADVANCED
OPERATION
VIDEO
Connect a subwoofer with a built-in amplifier.
HDMI 1
S VIDEO
PREPARATION
FRONT
CENTER
y
INTRODUCTION
■ Connecting an external amplifier
If you want to use another amplifier, connect an external
amplifier to the PRE OUT jacks. Each PRE OUT jack
outputs the same channel signals as the corresponding
speaker terminals.
HDMI 4
BD/DVD)
MONITOR OUT
COMPONENT
VIDEO
REMOTE
PR
IN
OUT
PB
VIDEO
Y
Infrared signal
receiver or Yamaha
component
APPENDIX
Remote
control out
Remote
control in
IR flasher or Yamaha
component
(CD or DVD player, etc.)
English
17 En
Connections
Connecting a USB storage device
Connect a USB memory device or USB portable audio
player to the USB port on the front panel of this unit. For
information about USB storage devices supported by this
unit, see page 37.
Connecting the FM and AM antennas
An indoor FM antenna and an AM loop antenna are
supplied with this unit. Connect these antennas properly to
the respective jacks.
Indoor FM antenna
VOLUME
l
EMORY
PRESET
h
FM
l
AM
TUNING
h
SCENE
AM loop
antenna
Outdoor AM antenna
Connect a 5 to 10 m (16 to
33 ft) vinyl-covered wire,
and extend it outdoors
(use the AM loop antenna
together with this
antenna).
DOCK
HDMI 1
HDMI OUT
HDMI 2
HDM
(BD/DVD)
BD/DVD
TV
RADIO
CD
INPUT
PURE DIRECT
STRAIGHT
VIDEO AUX
OPTIMIZER MIC
USB
PHONO
COMPONENT
VIDEO
EFFECT
VIDEO
AUDIO
S VIDEO
ANTENNA
UNBAL.
FM
GND
PR
AM
MONITOR OUT
COMPONENT
VIDEO
REMOTE
PR
IN
GND
OUT
PB
PB
VIDEO
VIDEO
Y
Y
12V
0.1A MAX.
TRIGGER OUT
USB
Ground (GND terminal)
The GND terminal is not for earth grounding.
To reduce noises, connect a ground bar or a
vinyl-covered wire with a copper plate at its tip,
and place it in the moist ground.
y
USB memory device or
USB portable audio player
Using the VIDEO AUX jacks
Use the VIDEO AUX jacks on the front panel to connect a
game console or a video camera to this unit. Be sure to
turn down the volume of this unit and other components
before making connections.
• The supplied antennas are normally sensitive enough to obtain good
reception.
• Position the AM loop antenna away from this unit.
• If you cannot get good reception, we recommend that you use an outdoor
antenna. For details, consult the nearest authorized Yamaha dealer or
service center.
• Always use the AM loop antenna even when the outdoor antenna is
connected.
Assembling the AM loop antenna
VOLUME
l
EMORY
PRESET
h
FM
l
AM
TUNING
h
SCENE
BD/DVD
TV
RADIO
CD
INPUT
STRAIGHT
PURE DIRECT
VIDEO AUX
OPTIMIZER MIC
EFFECT
VIDEO
L
V
L
AUDIO R
R
Analog audio
output
Video output
VIDEO
Game console or video
camera
18 En
AUDIO
USB
Connecting the AM loop antenna
The wires of the AM loop antenna have no polarity. You
can connect either wire to the AM terminal and the other
to the GND terminal.
Press and hold
Insert
Release
Connections
Connecting the power cable
INTRODUCTION
After all connections are complete, plug the power cable
of this unit into an AC wall outlet.
To the AC wall outlet
NE2/PRESENCE
CLASS 2 WIRING
PREPARATION
Power cable
BASIC
OPERATION
Turning this unit on and off
Press KMAIN ZONE ON/OFF on the front
panel (or pPOWER on the remote control)
to turn on this unit.
2
Press KMAIN ZONE ON/OFF (or
pPOWER) again to turn off this unit
(standby mode).
ADVANCED
OPERATION
1
y
ADDITIONAL
INFORMATION
• The unit needs a few seconds until ready to play back.
• You can also turn on this unit by pressing PSCENE (or hSCENE).
• This unit consumes a small amount of electricity even in the standby
mode. We recommend disconnecting the power cable from the AC wall
outlet.
Caution
Do not unplug this unit while it is turned on. Doing so
may damage this unit or cause the settings of this unit
to be saved incorrectly.
APPENDIX
English
19 En
Optimizing the speaker setting for your listening room (YPAO)
This unit has a Yamaha Parametric Acoustic Optimizer (YPAO). With the YPAO, this unit automatically adjusts the
output characteristics of your speakers based on speaker position, speaker performance, and the acoustic characteristics
of the room. We recommend that you first adjust the output characteristics with the YPAO when you use this unit.
Caution
• Be advised that it is normal for loud test tones to be
output during the “Auto Setup” procedure. Do not
allow small children to enter the room during the
procedure.
• To achieve the best results, make sure the room is as
quiet as possible while the “Auto Setup” procedure is
in progress. If there is too much ambient noise, the
results may not be satisfactory.
2
Connect the supplied optimizer microphone
to the SOPTIMIZER MIC jack on the front
panel.
INPUT
VIDEO AUX
OPTIMIZER MIC
VIDEO
USB
AUDIO
y
• You can manually adjust the output characteristics of your speakers
with “Manual Setup” in the Setup menu (page 47).
Optimizer microphone
Using Auto Setup
1
Check the following points.
Before starting the automatic setup, check the
following.
• All speakers and subwoofer are connected
properly.
• Headphones are disconnected from this unit.
• The video monitor is connected properly.
• This unit and the video monitor are turned on.
• This unit is selected as the video input source of the
video monitor.
• The connected subwoofer is turned on and the
volume level is set to about half way (or slightly
less).
• The crossover frequency controls of the connected
subwoofer are set to the maximum.
“MIC ON. View GUI MENU” appears on the front panel
display.
The GUI screen appears on the video monitor.
Auto Setup
Extra Speaker Assignment
Zone2
Presence
None
EQ Type
Flat
Front
Natural
Start
Move focus
Start
y
• You can bring up the above menu screen from the Setup menu (page 47).
3
CROSSOVER/
HIGH CUT
VOLUME
Place the optimizer microphone at your
normal listening position on a flat level
surface with the omni-directional
microphone heading upward.
Optimizer microphone
MIN
MAX
MIN
MAX
Subwoofer
y
• It is recommended that you use a tripod or something similar to fix the
optimizer microphone at the same height as your ears would be when
seated in your listening position. You can fix the optimizer microphone to
the tripod with the attaching screw of the tripod.
20 En
Optimizing the speaker setting for your listening room (YPAO)
4
Set
Finish
Select items
Speaker Config
Displays the number of speakers connected to this unit in
the following order:
Total of Front and Center/Total of Surround and Surround
Back/Subwoofer
Distance (Min / Max)
Displays the speaker distance from the listening position
in the following order:
Closest speaker distance/Farthest speaker distance
Level (Min / Max)
Displays the speaker output levels in the following order:
Lowest speaker output level/Highest speaker output level
Notes
• If “Error” appears on the GUI screen during “Auto Setup”, measurement
is canceled and the type of error is displayed. For details, see “When an
error message is displayed during measurement” (page 22).
• If problems occur during measurement, “Check xx warning(s)” (xx
indicates the number of warnings) appears in red. For details, see “When
a warning message is displayed after measurement” (page 22).
7
Press jCursor n to select “Start” and then
press jENTER to start the setup procedure.
A countdown starts and a measurement starts in 10
seconds. A loud test tone is output during
measurement.
Auto Setup
Auto Setup Completed !
Please disconnect the micorphone
(Then this screen will automatically disappear)
Measurement takes about 3 minutes. To obtain precise
results, stay where you will not disturb the
measurement, such as to the side of or behind the
speakers or outside the room.
The optimizer microphone is sensitive to heat. Store it
in a cool place and away from direct sunlight after
measurement. Do not leave it in a place where it will be
subjected to high temperatures such on an AV
component.
APPENDIX
Return
Notes
• During the automatic setup procedure, do not perform any
operation on this unit.
• Press jCursor k to cancel the automatic setup procedure.
Press jENTER to confirm the settings.
The speaker characteristics are adjusted according to
measurement results.
To cancel the operation, press jCursor l / h to
select “Cancel” and press jENTER.
When the following screen appears, remove the
optimizer microphone. “Auto Setup” is now
complete.
ADDITIONAL
INFORMATION
Front
This adjusts each speaker to obtain the same
characteristics as the front left and right speakers.
Select this if your front left and right speakers have
significantly better qualities than the other speakers.
6
Cancel
ADVANCED
OPERATION
Flat
This adjusts each speaker to obtain the same
characteristics. Select this if your speakers have
similar qualities.
Speaker Config : 3 /4 / 0.1
Distance (Min / Max) : 3.00m / 10.50m
Level (Min / Max) : -3.5dB / +4.5dB
BASIC
OPERATION
Natural
This adjusts all speakers to achieve natural sound.
Select this if sounds in the high frequency range seem
too strong when “EQ Type” is set to “Flat”.
Result
PREPARATION
To select sound characteristics for
adjustment, press jCursor n to select “EQ
Type” and then press jCursor l / h.
If this unit does not work when you press jCursor,
press iON SCREEN once and then operate this
unit.
This unit has a parametric equalizer that adjusts the
output levels for each frequency range. The equalizer
is adjusted to produce a cohesive sound field based on
automatically measured speaker characteristics.
In “EQ Type”, you can select the following
parametric equalizer characteristics suitable for the
desired sound characteristics.
Auto Setup
INTRODUCTION
5
When measurement is successfully completed,
“YPAO Complete” appears on the front panel display
and the measurement result appears on the GUI
screen.
When the speakers are connected to EXTRA
SP terminals, press jCursor k repeatedly
to select “Extra Speaker Assignment” and
then press jCursor l / h to select how to
use EXTRA SP terminals from “Zone2”,
“Presence” or “None”.
If this unit does not work when you press jCursor,
press iON SCREEN once and then operate this
unit.
y
21 En
English
• If you do not want to apply the measurement results, select “Cancel”.
• Perform “Auto Setup” again if you change the number or positions of
speakers.
• If you press jENTER before removing the optimizer microphone,
“Auto Setup” of “Speaker Setup” in the Setup menu (page 47) is
displayed.
Optimizing the speaker setting for your listening room (YPAO)
When an error message is displayed
during measurement
If an error is detected during measurement, the
measurement is canceled and “Error” appears on the GUI
screen. Check the error and solve the problem. For details
on each error message, see page 65.
Press jCursor n once, press jCursor l / h
to select “Retry” or “Exit” and then press
jENTER.
Error
E-1 : No Front Speakers
FrontL/R channel signals are not detected.
Check wiring and connections of the front L/R speakers.
Retry
Exit
Move focus
Retry
Performs “Auto Setup” again.
Exit
Terminates the measurement and “Auto Setup”.
y
• When “E-5:NOISY” appears, you can continue measurement. To
continue measurement, select “Proceed”. However, we recommend that
you solve the problem first and then perform measurement again.
When a warning message is displayed
after measurement
If a problem occurs during measurement, “Check xx
warning(s)” appears on the GUI screen. Check the
warning and solve the problem. For details on each
warning message, see page 67.
Auto Setup
Result
Speaker Config : 3 /4 / 0.1
Distance (Min / Max) : 3.00m / 10.50m
Level (Min / Max) : -3.5dB / +4.5dB
Check 2 warnings
Set
Cancel
See details
Select items
y
• Optimization will not be performed while a warning message is
displayed. We recommend that you solve the problem and perform “Auto
Setup” again.
1
Press jCursor n / k to select “Check xx
warning(s)” and then press jENTER.
Details of the warning message are displayed. If there
are multiple warning messages, you can display the
next message using jCursor h.
2
To return to the top result display, press
jENTER again.
22 En
BASIC OPERATION
Playback
1
2
VOL.
y
• You can also select an input source from the GUI screen (page 24).
• You can change the input source name displayed on the front panel
display or GUI screen as necessary (page 52).
Volume-18.5dB
L
SL
SW
C
R
SR
Note
When you play back a DTS-CD, noise may be output in some
conditions, which may cause a speaker malfunction. Make sure
that the volume is set to low before starting playback. If noise is
output, do the following.
1) When only noise is output
If a DTS bitstream signal is not properly input to this unit,
only noise is output. Connect the playback component to this
unit by digital connection and play back the DTS-CD. If the
condition is not improved, the problem may results from the
playback component. Consult the manufacturer of the
playback component.
2) When noise is output during playback or skip operation
Before playing back the DTS-CD, display the Option menu
after selecting the input source and set “Decoder Mode” to
“DTS” (page 40).
Using the SCENE function
Keys
Input source
Sound field program
BD/DVD
HDMI 1
Straight
TV
AV 1
Straight
CD
AV 3
Straight
RADIO
TUNER
7ch Enhancer
APPENDIX
y
• When this unit is on standby, you can turn on this unit by pressing
PSCENE (or hSCENE).
• If you connect a Yamaha DVD/CD player that has the capability of the
SCENE control signals to the REMOTE OUT jack of this unit, you can
start playback on the player by using the SCENE function.
ADDITIONAL
INFORMATION
This unit has a SCENE function that allows you to change
input sources and sound field programs with one key. Four
scenes are available for different usages, such as playing
movies or music. The following input sources and sound
field programs are provided as the initial factory settings.
ADVANCED
OPERATION
Play the external component that you have
selected as the source input, or select a radio
station on the tuner.
Refer to the operating instructions of the external
component for details on playback. For selecting
radio stations or playback of an iPod, Bluetooth
component or USB storage device using this unit, see
the following.
• FM/AM radio tuning (page 30)
• iPod playback (page 34)
• Bluetooth component playback (page 36)
• USB storage device playback (page 37)
VOL.
BASIC
OPERATION
AV1
Volume
PREPARATION
Input source name
3
Turn the JVOLUME control (or press
sVOLUME +/–) to adjust the volume.
Turn on external components (TV, DVD
player, etc.) connected to this unit.
Rotate the RINPUT selector (or press
dInput selection key) to select an input
source.
The name of the selected input source is displayed for
a few seconds.
INTRODUCTION
4
Basic procedure
Selecting a SCENE
Press PSCENE (or hSCENE).
English
y
• You can also select a SCENE from the GUI screen (page 24).
23 En
Playback
Registering input source/sound field
program
y
• If an input source you want to select is available in “Select Scene”, you
can select the desired input source and sound field program at once.
3
Select the desired input source/sound field
program and then press and hold PSCENE (or
hSCENE) key to edit until “SET Complete”
appears on the front panel display.
y
Muting audio output
1
Press uMUTE on the remote control to mute
the audio output.
The MUTE indicator on the front panel display
flashes while audio output is muted.
2
Press uMUTE again to resume audio
output.
• If you change the input source setting, register the remote control code of
an external component to the input source (page 55).
Switching remotely controlled external
components linked to scene selections
You can operate an external component with the remote
control of this unit by setting a remote control code for the
external component for each input source. Setting remote
control codes for desired input sources allows you to
switch between external components linked to scene
selections.
1
Adjusting high/low frequency sounds
(tone control)
Register the remote control code of an
external component to the desired input
source (page 55).
You can adjust the balance of the high frequency range
(Treble) and low frequency range (Bass) of sounds output
from the front left and right speakers to obtain desired
tone.
Note
1
• This feature is not available for the TUNER input source.
2
While holding down the desired hSCENE
key, press and hold the dInput selection
key to which you registered a remote control
code in step 1.
From now on the external component can be remotely
controllable just by selecting a scene.
Selecting a source on the GUI screen
1
Press jENTER.
Press iON SCREEN on the remote control.
The GUI screen appears on the video monitor.
Press MTONE CONTROL on the front panel
repeatedly to select “Treble” or “Bass”.
The current setting is displayed on the front panel
display.
Treble
2
0.0dB
Rotate the NPROGRAM selector to adjust
the frequency range.
Control range: –10.0 dB to +10.0 dB
The display returns to the previous screen
automatically in few seconds.
Notes
Select Scene
BD/DVD
TV
CD
• The tone control settings are not effective when this unit is in the Pure
Direct mode or “MULTI CH” is selected as an input source.
• If you set the balance extremely off, sounds may not match those from
other channels well.
RADIO
Enjoying pure hi-fi sound
2
Use jCursor k / n repeatedly to switch the
page and jCursor l / h repeatedly to
select the desired source.
Category
Source
Select Scene
BD/DVD, TV, CD, RADIO
Select Media
USB, DOCK, TUNER,
PHONO, V-AUX, MULTI CH
Select Input
HDMI1-4, AV1-6, AUDIO1/2
24 En
Use Pure Direct mode to enjoy the pure high fidelity
sound of the selected source. When Pure Direct mode is
activated, this unit plays back the selected source with the
least circuitry.
Press QPURE DIRECT (or gPURE DIRECT)
to turn the Pure Direct mode on or off.
QPURE DIRECT lights up when you set Pure Direct
mode on.
Playback
y
• The font panel display automatically turns off while this unit in the Pure
Direct mode.
Using your headphones
Changing information on the front
panel display
Press DINFO (or fINFO) repeatedly.
Available information differs depending on the selected
input source.
For example, if you select HDMI1 input and display “DSP
Program”, the following screen appears on the front panel
display.
INTRODUCTION
The following features are disabled in the Pure Direct
mode.
– sound field program, tone control
– display and operation of the Option menu and Setup
menu
– multi-zone function
Input source
Straight
Sound field program
Notes
Displaying input signal information
When HDMI 1-4 or AV1-4 is selected as the input source,
you can display audio/video signal information.
• Input signal information is displayed on both the GUI screen and front
panel display.
1
HDMI1-4
AV1-6
AUDIO1/2
V-AUX
PHONO
iPod (DOCK) (simple
remote mode)
BLUETOOTH (DOCK)
Input
DSP Program
Audio Decoder
USB
iPod (DOCK) (menu
browse mode)
(on play information display)
DSP Program, Audio Decoder,
Song, Artist, Album
(on GUI screen)
List
TUNER
Press jCursor k / n to select “Signal Info”
and then press jENTER.
Information on the input signal is displayed. See
page 40 for details about each information.
Signal Info
<Audio>
Dolby TrueHD
Format
3 / 2 / 0.1
Channel
96kHz
Sampling Frequency
--Bitrate
<Video>
Video In
Video Out
DSP
(for Radio Data System
information)
Program Service, Program
Type, Radio Text, Clock Time,
DSP Program, Audio Decoder,
Frequency
MULTI CH
Input
HDMI 480p
HDMI 1080p
APPENDIX
Input
Frequency, DSP Program,
Audio Decoder
HDMI 1
Straight
Note
• If an HDMI related error occurs, error information is displayed at
the bottom of the screen.
3
ADDITIONAL
INFORMATION
2
Select the desired input source and then
press rOPTION on the remote control.
The Option menu for the selected input source is
displayed (page 39).
Information
ADVANCED
OPERATION
y
Input source
BASIC
OPERATION
• When you connect headphones, no signals are output at the speaker
terminals.
• When multi-channel signals are processed, sounds in all channels are
divided to left and right channels. When “MULTI CH” is selected as the
input source, only front L/R sounds are output from the headphones.
PREPARATION
Plug your headphones in the LPHONES jack on
the front panel.
When you select a sound field program while using the
headphones, the mode is automatically set to SILENT
CINEMA mode.
To exit the Option menu, press rOPTION.
English
25 En
Enjoying the sound field programs
This unit is also equipped with a Yamaha digital sound field processing (DSP) chip. You can enjoy multi-channel sounds
for almost all input sources using various sound field programs stored on the chip and a variety of surround decoders.
Selecting sound field programs
■ Selecting a sound field program on the front panel
Rotate the NPROGRAM selector to select a desired sound field program.
■ Selecting a sound field program with the remote control
Perform the following operations depending on the category of the sound field programs.
Sound field programs for movies/TV programs ...............................Press gMOVIE repeatedly.
Sound field programs for music........................................................Press gMUSIC repeatedly.
Stereo reproduction ...........................................................................Press gSTEREO repeatedly.
Multi-channel stereo reproduction ....................................................Press gSTEREO repeatedly.
Compressed music enhancer.............................................................Press gSTEREO repeatedly.
Surround decoder ..............................................................................Press gSUR.DECODE repeatedly.
For example, if you select “Sci-Fi”, the following screen appears on the front panel display.
Sound field program category
Sci-Fi
Program name
Notes
• Sound field programs are stored for each input source. When you change the input source, the sound field program previously selected for that input
source is applied again.
• When you play back the Dolby Digital Plus, Dolby TrueHD, DTS Express, DTS-HD Master Audio, DTS-HD High Resolution Audio sources or audio
signals with sampling frequency of higher than 96 kHz, the straight decode mode (page 29) is automatically selected.
Sound field program descriptions
This unit provides sound field programs for multiple categories including music, movies and stereo reproduction. Select
a sound field program based on your listening preference, not merely on the name of the program, etc.
y
• You can check what speakers are currently outputting signals with the speaker indicators on the front panel display (page 6).
• Each program can adjust sound field elements (sound field parameters). For details, see page 42.
•
in the table indicates the sound field program with CINEMA DSP.
For movie/TV program sources (MOVIE)
Program
Descriptions
Standard
This program creates a sound field emphasizing the surrounding feeling without disturbing the original acoustic
positioning of multi-channel audio such as Dolby Digital and DTS. It has been designed with the concept of “an
ideal movie theater”, in which the audience is surrounded by beautiful reverberations from the left, right and rear.
Spectacle
This program represents the spectacular feeling of large-scale movie productions.
It reproduces a broad theater sound field matching the cinemascope and wider-screen movies with an excellent
dynamic range from very small to extremely large sound.
Sci-Fi
This program clearly reproduces the finely elaborated sound design of the latest science fiction and special effectsfeaturing movies. You can enjoy a variety of cinematographically created virtual spaces reproduced with clear
separation between dialog, sound effects and background music.
Adventure
This program is ideal for precisely reproducing the sound design of action and adventure movies.
The sound field restrains reverberations but puts emphasis on reproducing a powerful space expanded widely to
the left and right. The reproduced depth is also restrained relatively to ensure the separation between audio
channels and the clarity of the sound.
26 En
Enjoying the sound field programs
Program
Descriptions
Mono Movie
This program is provided for reproducing monaural video sources such as a classic movie in an atmosphere of a
good old movie theater. The program produces the optimum expansion and reverberation to the original audio to
create a comfortable space with a certain sound depth.
Sports
This program allows the listeners to enjoy stereo sport broadcasts and studio variety programs with enriched live
feeling. In sports broadcasts, the voices of the commentator and sportscaster are positioned clearly at the center
while the atmosphere of the stadium expands in an optimum space to offer the listeners with a feeling of presence
in the stadium.
Action Game
This sound field has been suitable for action games such as car racing and FPS games. It uses the reflection data
that limits the effects range per channel in order to offer a powerful playing environment with a being-there feeling
by enhancing various effects tones while maintaining a clear sense of directions.
Roleplaying Game
This sound field has been suitable for role-playing and adventure games. It combines the sound field effects for
movies and the sound field designs for “Action Game” to represent the depth and 3D feeling of the field during
play, while offering movie-like surround effects in the movie scenes in the game.
BASIC
OPERATION
For audio music sources (MUSIC)
Program
Descriptions
Hall in Vienna
This is an approximately 1700-seated, middle-sized concert hall with a shoebox shape that is traditional in Vienna.
Pillars and ornate carvings create extremely complex reflections from all around the audience, producing a very
full, rich sound.
Chamber
This program creates a relatively wide space with a high ceiling like an audience hall in a palace. It offers pleasant
reverberations that are suitable for courtly music and chamber music.
Cellar Club
This program simulates a live house with a low ceiling and homey atmosphere. A realistic, live sound field
features powerful sound as if the listener is in a row in front of a small stage.
The Roxy Theatre
This is the sound field of a rock music live house in Los Angeles, with approximately 460 seats. The listener’s
virtual seat is at the center left of the hall.
The Bottom Line
This is the sound field at stage front in The Bottom Line, that was a famous New York jazz club once. The floor
can seat 300 people to the left and right in a sound field offering real and vibrant sound.
Music Video
This sound field offers an image of a concert hall for live performance of pop, rock and jazz music. The listener
can indulge oneself in a hot live space thanks to the presence sound field that emphasizes the vividness of vocals
and solo play and the beat of rhythm instruments, and to the surround sound field that reproduces the space of a
big live hall.
APPENDIX
For stereo reproduction (STEREO)
2ch Stereo
ADDITIONAL
INFORMATION
This sound field simulates a concert hall with approximately 2500 seats in Munich, using stylish wood for the
interior finishing as normal standards for European concert halls. Fine, beautiful reverberations spread richly,
creating a calming atmosphere. The listener’s virtual seat is at the center left of the arena.
ADVANCED
OPERATION
Hall in Munich
Program
PREPARATION
This sound field features stable reverberations that match a wide range of movie genres from serious dramas to
musicals and comedies. The reverberations are modest but offer an optimum 3D feeling, reproducing effects tones
and background music softly but cubically around clear words and center positioning in a way that does not fatigue
the listener even after long hours of viewing.
INTRODUCTION
Drama
Descriptions
Use this program to mix down multi-channel sources to 2 channels.
y
• When multi-channel signals are input, they are downmixed to 2 channels and output from the front left and right speakers.
English
27 En
Enjoying the sound field programs
For multi-channel stereo reproduction (STEREO)
Program
7ch Stereo
Descriptions
Use this program to output sound from all speakers. When you play back multi-channel sources, this unit
downmixes the source to 2 channels and then outputs the sound from all speakers. This program creates a larger
sound field and is ideal for background music at parties, etc.
Compressed Music Enhancer (ENHANCER)
Program
Descriptions
Straight Enhancer
Use this program to enhance the sound nearest to the original depth and width of the 2-channel or multi-channel
compression artifacts.
7ch Enhancer
Use this program to play back compression artifacts in 7-channel stereo.
Surround decode mode (SUR. DECODE)
Select this program to playback sources with selected decoders. You can playback 2-channel sources on multi-channels.
Decoder
Descriptions
Pro Logic
Dolby Pro Logic decoder suitable for all kinds of sources.
PLIIx Movie /
PLII Movie
Dolby Pro Logic IIx (or Dolby Pro Logic II) decoder suitable for movies. If your listening environment is as
follows, you cannot select the Dolby Pro Logic IIx decoder.
• When the surround back speakers are not connected
• When headphones are connected
PLIIx Music /
PLII Music
Dolby Pro Logic IIx (or Dolby Pro Logic II) decoder suitable for music. If your listening environment is as
follows, you cannot select the Dolby Pro Logic IIx decoder.
• When the surround back speakers are not connected
• When headphones are connected
PLIIx Game /
PLII Game
Dolby Pro Logic IIx (or Dolby Pro Logic II) decoder suitable for games. If your listening environment is as
follows, you cannot select the Dolby Pro Logic IIx decoder.
• When the surround back speakers are not connected
• When headphones are connected
Neo:6 Cinema
DTS decoder suitable for movies.
Neo:6 Music
DTS decoder suitable for music.
y
• An input source is played back in straight decode mode (page 29) when “MULTI CH” is selected as the input source.
28 En
Enjoying the sound field programs
Enjoying unprocessed input sources
(Straight decode mode)
1
To cancel straight decode mode, press
OSTRAIGHT (or gSTRAIGHT) again.
A sound field program name appears on the front
panel display, and sound is reproduced with that
sound field effect.
CINEMA DSP 3D mode creates the intensive and
accurate stereoscopic sound field in the listening room.
To use this unit in CINEMA DSP 3D mode, presence
speakers are required. Connect the presence speakers to
the EXTRA SP terminals, perform the following settings
and then select a CINEMA DSP related sound field
program.
• Disconnect the headphones from the PHONES jack.
• Set “Extra Speaker Assignment” to “Presence”
(page 48).
• Set “3D DSP” to “On” (page 42).
When the sound field program runs in CINEMA DSP 3D
mode, the 3D indicator on the front panel display lights
up.
ADVANCED
OPERATION
Virtual CINEMA DSP allows you to enjoy DSP sound
field surround effects even without any surround speakers
by using virtual surround speakers. You can even enjoy
Virtual CINEMA DSP using a minimal two-speaker
system that does not include a center speaker.
When “Surround Speaker” in the Setup menu is set to
“None” (page 48), this unit operates in Virtual CINEMA
DSP mode.
Using CINEMA DSP 3D mode
BASIC
OPERATION
Enjoying sound field programs without
surround speakers (Virtual CINEMA
DSP)
Note
• SILENT CINEMA mode is not available in the following conditions.
– 2ch Stereo of the sound field program is selected.
– Pure Direct mode or straight decode mode is selected.
PREPARATION
2
To enable straight decode mode, press
OSTRAIGHT (or gSTRAIGHT).
“Straight” appears on the front panel display.
SILENT CINEMA allows you to enjoy multi-channel
sources with your headphones. SILENT CINEMA mode
is automatically selected when you connect the headphone
plug to the PHONES jack.
INTRODUCTION
In straight decode mode, sounds are reproduced without
sound field effect. 2-channel stereo sources are output
from only the front left and right speakers. Multi-channel
input sources are decoded straight into the appropriate
channels and multi-channel sounds are reproduced
without a sound field effect.
Enjoy sound field programs with
headphones (SILENT CINEMA™)
Note
ADDITIONAL
INFORMATION
• Virtual CINEMA DSP is not available in the following conditions even if
you set “Surround Speaker” to “None” (page 48).
– headphone plug is connected to the PHONES jack.
– 7ch Stereo of the field sound program is selected.
– Pure Direct mode or straight decode mode is used.
APPENDIX
English
29 En
FM/AM tuning
The FM/AM tuner of this unit provides the following two
modes for tuning.
4
■ Frequency tuning mode
You can tune in to a desired FM/AM station by searching
or specifying its frequency.
Notes
• When you press lNumeric keys during preset tuning, a
preset number is selected. Set tuning mode to frequency tuning
mode using HTUNING/CH l / h (or eTUN./CH k / n)
prior to the operation.
• “Wrong Station!” appears on the front panel display when you
enter a frequency that is out of receivable range. Make sure that the
entered frequency is correct.
• You do not need enter zero if it comes at the end of a decimal
number. For example, enter “925” for “92.50 MHz” or “94” for
“94.00 MHz”.
■ Preset tuning mode
You can preset the frequencies of FM/AM stations by
registering them to specific numbers, and later just select
those numbers to tune in.
Note
• Adjust the FM/AM antennas connected to this unit for the best reception.
Tuning in to the desired FM/AM station
(Frequency tuning)
To tune in by direct frequency tuning, press
lNumeric keys to enter the frequency of
the station.
Registering FM/AM stations and
tuning in (Preset tuning)
Rotate the RINPUT selector (or press
dTUNER) to select “TUNER” as the input
source.
You can register up to 40 FM/AM stations (Preset).
2
Press GFM (eFM) or GAM (eAM) to select
a band.
“FM” or “AM” appears on the front panel display
according to the band that you have selected.
The tuner automatically detects FM stations with strong
signals and registers up to 40 stations. To register AM
stations, use manual station preset.
3
Press HTUNING l / h (or eTUNING k /
n) to specify the frequency.
To adjust the frequency to a higher range, press h (or
k). To adjust it to the lower range, press l (or n).
The TUNED indicator on the front panel display
lights up when the tuner is tuned in to a station. The
STEREO indicator also lights up if the program being
broadcasted is in stereo.
• Only Radio Data System broadcasting stations are stored automatically
by automatic station preset.
1
Registering stations by automatic station
preset
Note
1
Rotate the RINPUT selector (or press
dTUNER) to select “TUNER” as the input
source.
2
Press rOPTION on the remote control.
The Option menu for “TUNER” is displayed
(page 39).
3
Select “Auto Preset” and then press
jENTER.
STEREO
TUNED
FM92.50MHz
The frequency changes in the following manner according
to how you press HTUNING l / h (or eTUNING
k / n).
When you press the key more than 1 second
The tuner searches the frequency of a station that is
detectable around the current frequency. This is effective
when the tuner can receive strong signals without any
interference. Once the search starts, release the key.
When you keep holding the key, the search continues even
when a station is detected. This is useful when you want to
tune in to a specific station.
When you press and release the key
The tuner increases or decreases the frequency in steps.
Use this method when the tuner cannot receive strong
signals and stations are skipped during the search.
y
• You can switch between stereo and monaural for FM broadcast in the
Option menu (page 40).
30 En
Auto Preset
Automatic station preset starts about 5 seconds later
from the lowest frequency upwards.
y
• You can select the preset number at which the preset starts by
pressing ePRESET k / n or jCursor k / n while “READY”
is displayed on the front panel display.
• To cancel registration, press jRETURN.
Status
01:FM87.50MHz
Preset number
Frequency
FM/AM tuning
Registering stations by manual station
preset
1
Tune in to the desired station (page 30).
2
Press EMEMORY (or eMEMORY).
“Manual Preset” appears on the front panel display,
followed soon by the preset number to which the
station will be registered.
Clearing preset stations
1
Rotate the RINPUT selector (or press
dTUNER) to select “TUNER” as the input
source.
2
Press rOPTION on the remote control.
The Option menu for “TUNER” is displayed
(page 39).
3
Press jCursor k / n to select “Clear Preset”
and then press jENTER.
• By holding down EMEMORY (or eMEMORY) for more than
2 seconds, you can skip the following steps and automatically
register the selected station to an empty preset number (next to the
lastly-registered preset number).
3
01:FM92.50MHz
Preset number
y
• To cancel the operation and return to the Option menu, press
jRETURN.
Press jCursor k / n to select a preset
number to reset and then press jENTER.
The preset station registered to the selected preset
number is cleared. To clear the registration of
multiple preset numbers, repeat step 4.
5
To exit the Option menu, press rOPTION.
01:Empty
Flashes
Preset
number
y
ADDITIONAL
INFORMATION
4
Frequency to be registered
ADVANCED
OPERATION
Press FPRESET l / h (or ePRESET k / n)
to select the preset number to which the
station will be registered.
When you select a preset number to which no station
is registered, “Empty” appears. When you select a
preset number to which any station has been already
registered, the frequency of the station is displayed.
BASIC
OPERATION
y
• Preset numbers to which no stations are registered are skipped.
• “No Presets” or “No Presets in Memory” is displayed if no stations are
registered.
• You can directly select a preset number by pressing lNumeric keys
while calling a preset station. “Empty” appears on the display if you
enter a preset number to which no station is registered. “Wrong Num.”
appears if you enter an invalid number.
• When you presslNumeric keys during normal tuning, a frequency
is entered. Set tuning mode to preset tuning mode using FPRESET l
/ h (or ePRESET k / n ) prior to the operation.
PREPARATION
You can manually register FM stations with weak signals
or AM stations.
y
INTRODUCTION
During the automatic station preset, “MEMORY”
appears in the front panel display each time a station
is registered.
When registration is complete, “FINISH” appears
and then the display returns to the Option menu.
To return the display to the original state, press
rOPTION.
• You can also select a preset number using the lNumeric
keys.
4
APPENDIX
Press EMEMORY (or eMEMORY).
When registration is complete, the display returns to
the original state.
y
• To cancel registration, press jRETURN or leave this unit
without any operations for about 30 seconds.
Calling a preset station (Preset tuning)
You can call preset stations registered by automatic station
preset or manual station preset.
English
Press FPRESET l / h (or ePRESET k / n) to
select a preset number.
31 En
Radio Data System tuning
Radio Data System is a data transmission system used by FM stations in many countries. This unit can receive various
Radio Data System data such as “Program Service”, “Program Type”, “Radio Text”, “Clock Time” and “EON”
(enhanced other networks) when receiving Radio Data System broadcasting stations.
Note
• The Radio Data System reception feature is only available in U.K., Europe and Russia models.
Displaying the Radio Data System
information
You can display the 4 types of the Radio Data System
information (“Program Service”, “Program Type”, “Radio
Text” and “Clock Time”) in the front panel display.
Frequency
Frequency, preset number (if the selected station is
preset)
Back to “Program Service”
1
Tune into the desired Radio Data System
broadcasting station.
• Frequency tuning (page 30)
• Preset tuning (page 31)
Display example (Program Type)
SPORT
y
• You can also use the PTY Seek mode to tune into the desired Radio
Data System broadcasting station from the preset ones.
2
Press DINFO (or fINFO) repeatedly to
toggle the following Radio Data System
information display modes.
Program Service
Program service name, frequency
Selecting the Radio Data System
program type (PTY Seek)
You can select the desired radio program by program type
from the all preset Radio Data System broadcasting
stations.
y
Program Type
• To select a radio program using PTY Seek, you must first register the
Radio Data System stations (page 30). “No Presets” or “No Presets in
Memory” is displayed if no stations are registered.
• You can also operate PTY Seek using the GUI screen.
Program type, frequency
1
Rotate the RINPUT selector (or press
dTUNER) to select “TUNER” as the input
source.
Radio Text
2
Press rOPTION on the remote control.
The Option menu for “TUNER” is displayed
(page 39).
3
Press jCursor k / n to select “PTY Seek”
and then press jENTER.
Radio text, frequency
Clock Time
Clock time, frequency
DSP Program
Current sound field program (page 26), frequency
Audio Decoder
Current audio decoder (page 28), frequency
32 En
Radio Data System tuning
4
PressjCursor l / h to select a program
type for search.
Program Type
You can select a program type from the following.
Program type
Description
Current affairs
INFO
General information
SPORT
Sports
EDUCATE
Education
DRAMA
Drama
CULTURE
Culture
SCIENCE
Science
VARIED
Light entertainment
POP M
Popular music
ROCK M
Rock music
M.O.R. M
Middle-of-the-road music (easy
listening)
LIGHT M
Light classics
CLASSICS
Serious classics
OTHER M
Other music
To search a station, press jCursor k / n.
• To search downward from the current preset
station, press jCursor n.
• To search upward from the current preset station,
press jCursor k.
When a station is detected, the search stops. If the
station is not the desired one, Press the same key to
continue the search. To end the operation, press
rOPTION.
1
Tune into the desired Radio Data System
broadcasting station.
• Frequency tuning (page 30)
• Preset tuning (page 31)
2
Press rOPTION on the remote control.
The Option menu for “TUNER” is displayed
(page 39).
3
Press jCursor k / n to select “EON” and
then press jENTER.
“EON:OFF” appears on the front panel display.
y
• “No Presets” or “No Presets in Memory” is displayed if no stations
are registered.
• “Not Available” is displayed if the affiliate station of the selected
preset station or the EON data service is not available.
4
Press jCursor l / h to select a program
type.
NEWS
OFF
5
AFFAIRS
SPORT
ADDITIONAL
INFORMATION
5
y
• To use the EON data service, you must first register the Radio Data
System stations and their affiliate stations (page 30).
• EON data service settings are reset when you turn the power off.
• You can also operate EON using the GUI screen.
ADVANCED
OPERATION
AFFAIRS
BASIC
OPERATION
News
PREPARATION
NEWS
You can receive the EON (enhanced other networks) data
service of the Radio Data System station network. If you
are receiving Radio Data System broadcasting when an
affiliate station starts broadcasting a program you have
selected, this unit automatically switches station. To use
this feature, select one of the 4 Radio Data System
program types (NEWS, AFFAIRS, INFO or SPORT)
while receiving Radio Data System broadcasting. When
an affiliate station starts broadcasting a selected program,
this unit automatically tunes into that station, and returns
to the previous station when the selected program ends.
INTRODUCTION
PTY:SPORT
Using the enhanced other networks
(EON) data service
INFO
APPENDIX
After selecting a program type, press
rOPTION again.
When an affiliate station starts broadcasting the
selected program, this unit automatically tunes in to
that station. When the program ends, it automatically
switches back to the previous station.
y
33 En
English
• The EON is turned off in the following cases:
– when the EON is activated once.
– when this unit is set to standby before EON is activated
– when another station is selected before EON is activated
• To cancel the EON, select “OFF” in step 4.
Using iPod™
Once you have stationed your iPod in a Yamaha iPod universal dock (such as the YDS-11, sold separately) connected to
the DOCK terminal on the rear panel of this unit (page 17), you can enjoy playback of your iPod using the supplied
remote control or the menu displayed on the GUI screen. You can also use the Compressed Music Enhancer mode of this
unit to improve the sound quality of the compression artifacts (such as MP3 format) stored on your iPod (page 28).
Notes
• iPod touch, iPod (Click and Wheel including iPod classic), iPod nano, and iPod mini are supported.
• Some features may not be compatible depending on the model or the software version of your iPod.
• Some features may not be available depending on the model of Yamaha iPod universal dock. The following sections describe the procedure when using
the YDS-11.
y
• Once the connection between your iPod and this unit is complete, “iPod connected” appears on the front panel display.
• For a complete list of status messages that appear on the front panel display and GUI screen, see the “iPod” section on page 63.
Controlling iPod in menu browse mode
Controlling iPod™
You can control your iPod when you set it in the iPod
universal dock and switch the input source to DOCK. The
operations of your iPod can be done with the aid of the
video display (menu browse mode) or without it (simple
remote mode).
When you connect your iPod to this unit, you can perform
the following operations with the remote control.
Key
ENTER
j
You can browse song or video files stored on your iPod
using the GUI screen. You cannot directly control your
iPod in this mode.
y
• “_”(underscore) is displayed for characters that this unit cannot display.
1
Rotate the RINPUT selector (or press
dDOCK) to select “iPod” (DOCK) as the
input source.
2
Press tDISPLAY on the remote control.
The following screen appears on the GUI screen.
Function
Subsequent menu
k
Menu up
n
Menu down
l
Previous menu
h
Subsequent menu
w
Search backward (Press and hold)
f
Search forward (Press and hold)
a
Skip forward
b
Skip backward
iPod
Music
Videos
Input
k
s
Stop
e
Pause (Menu browse mode)
Play/Pause (Simple remote mode)
p
t
DISPLAY
Play (Menu browse mode)
Play/Pause (Simple remote mode)
Switch between Menu browse mode and
Simple remote mode
Controlling iPod in simple remote mode
You can perform basic iPod operations (play, stop, skip,
etc.) using the supplied remote control without displaying
the menu on the GUI screen. You can also directly control
your iPod in this mode.
34 En
DSP
3
DOCK
STRAIGHT
Press jCursor k / n to select “Music” or
“Videos” and then press jCursor h.
• Select “Music” to browse music files.
• Select “Videos” to browse video files.
Note
• The “Videos” menu does not appear unless the both your iPod and
Yamaha iPod universal dock support the video browsing feature.
Using iPod™
4
Press jCursor k / n / l / h to select a
menu item and then press jENTER to start
playback.
■
1
Press tDISPLAY to switch to menu browse
mode while “DOCK” is selected as the input
source.
2
Press rOPTION on the remote control.
The Option menu for “iPod” is displayed (page 39).
3
Press jCursor k / n to select “Shuffle” or
“Repeat” and then press jENTER.
4
Press jCursor l / h to select the desired
playback style.
Play information display
b
c
d
e
01:04
–02:27
Input
DSP
DOCK
Straight
To return to the previous screen, press jRETURN.
y
• When the shuffle function is on, “
” appears on the GUI screen.
• When “Repeat” is set to “One” or “All”, “ 1 ” or “ ” appears on the
GUI screen.
ADDITIONAL
INFORMATION
a Shuffle and repeat icons
b
(playback),
(pausing), (search forward) and
(search backward)
c Album art (image of CD jacket, etc)
d Elapsed time, progress bar, remaining time
e Song title, artist name, album title
ADVANCED
OPERATION
Repeat:
• Select “Off” if you do not want to play back
repeatedly.
• Select “One” to repeat each song.
• Select “All” to repeat all songs.
Song Made-to-order
Artist Frankie Zipper
Album Road to India
BASIC
OPERATION
Shuffle:
• Select “Off” if you do not want to play back in
random order.
• Select “Songs” to play back songs in random order.
• Select “Albums” to play back albums in random
order.
a
PREPARATION
Menu items of “Videos”
Menu items vary depending on the files stored on your
iPod.
When controlling iPod in simple remote mode, operate the
iPod directly to set the shuffle and repeat playback.
INTRODUCTION
Menu items of “Music”
Playlists, Artists, Albums, Songs, Genres, Composers
• Playlists > Songs
• Artists > Albums > Songs
• Albums > Songs
• Songs
• Genres > Artists > Albums > Songs
• Composers > Albums > Songs
Shuffle/repeat playback
y
• You can switch the information displayed on the front panel display by
pressing DINFO (or fINFO).
• Album arts are available only when the file contains image data.
APPENDIX
English
35 En
Using Bluetooth™ components
You can connect a Yamaha Bluetooth wireless audio receiver (such as YBA-10, sold separately) to the DOCK terminal of
this unit and enjoy the music contents stored in your Bluetooth component (such as a portable music player) without
wiring between this unit and the Bluetooth component. You need to perform “Pairing” the connected Bluetooth wireless
audio receiver and your Bluetooth component in advance.
Note
• This unit supports A2DP (Advanced Audio Distribution Profile) of the Bluetooth profile.
Pairing the Bluetooth™ wireless audio
receiver and your Bluetooth
component
“Pairing” refers to the operation of registering a Bluetooth
component for Bluetooth communications. Pairing must
be performed when using a Bluetooth component with the
Bluetooth wireless audio receiver connected to this unit
for the first time or if the pairing data has been deleted.
5
Make sure the Bluetooth component
recognizes the Bluetooth wireless audio
receiver.
If the Bluetooth component detects the Bluetooth
wireless audio receiver, “YBA-10 YAMAHA”
(example) appears in the Bluetooth device list.
6
Select the Bluetooth wireless audio receiver
in the Bluetooth device list, and enter a pass
key “0000” into the Bluetooth component.
When pairing is complete, “Completed” appears on
the front panel display.
y
• You only need the pairing operation for the first time that you use the
Bluetooth component with the Bluetooth wireless audio receiver.
• Pairing requires operations on this unit and on the other component with
which Bluetooth communications are to be established. If necessary,
refer to the other component’s operating instructions.
■
Pairing the Bluetooth™ wireless audio
receiver and your Bluetooth™ component
To ensure security, a time limit of 8 minutes is set for
the pairing operation. You are recommended to read
and fully understand all the instructions before starting.
1
Rotate the RINPUT selector (or press
dDOCK) to select “BLUETOOTH” (DOCK)
as the input source.
2
Turn on the Bluetooth component you want
to pair with and set it to pairing mode.
For details on operation of the Bluetooth component,
refer to the manual supplied with it.
3
Press rOPTION on the remote control.
The Option menu for “BLUETOOTH” is displayed
(page 39).
y
• The Yamaha Bluetooth wireless audio receiver can be paired with up to
eight Bluetooth components. When pairing is conducted successfully
with a ninth component and the pairing data is registered, the pairing data
for the least recently used other component is cleared.
Playback of the Bluetooth™
component
1
Rotate the RINPUT selector (or press
dDOCK) to select “BLUETOOTH” (DOCK)
as the input source.
2
Press rOPTION on the remote control.
3
Press jCursor n to select “Connect” and
then press jENTER.
After you execute “Connect”, communication with
the Bluetooth component is established. When the
connected Bluetooth wireless audio receiver
recognizes the Bluetooth component, “BT
Connected” appears on the front panel display.
y
• When you press jENTER on the remote control, the connected
Bluetooth wireless audio receiver searches and connects to the last
connected Bluetooth component. If the Bluetooth wireless audio
receiver cannot find the Bluetooth component, “Not found”
appears on the front panel display.
• To disconnect the Bluetooth wireless audio receiver from the
Bluetooth component, display the Option menu again, select
“Disconnect” and then press jENTER.
Option Menu
Volume Trim
Connect
Pairing
Input
DSP
4
BLUETOOTH
7ch Enhancer
Press jCursor n to select “Pairing” and
then press jENTER.
“Searching” appears and the pairing operation starts.
y
• To cancel pairing, press jRETURN.
• You can also start pairing operation by holding down
EMEMORY on the front panel.
36 En
4
Start playback of the Bluetooth component.
Using USB storage devices
Notes
• You can play back only the files stored in the first partition.
• Some files may not be playable depending on models and types of USB storage devices.
Playback of the USB storage device
■
Play information display
INTRODUCTION
You can enjoy playback of WAV (PCM format only), MP3, WMA , MPEG-4 AAC and FLAC files stored on your USB
memory device or USB portable player connected to the USB port on the front panel of this unit. This unit supports USB
mass storage class devices (FAT 16 or FAT 32 format, except USB HDDs).
a
Connect your USB storage device to the
VUSB port on the front panel (page 18).
b
c
2
Rotate the RINPUT selector (or press
dUSB) to select “USB” as the input source.
The GUI screen appears on the video monitor.
d
e
PREPARATION
1
00:30
Song Made-to-order
Artist Frankie Zipper
Album Road to India
Input
DSP
USB
Straight Enhancer
USB
Input
DSP
USB
Straight Enhancer
3
Press jENTER to start play back.
You can also perform the following operations with
remote control.
Key
y
• Album arts are available only when the file contains image data.
Shuffle/repeat playback
1
Press rOPTION on the remote control
while “USB” is selected as the input source.
The Option menu for “USB” is displayed (page 39).
2
Press jCursor k / n to select “Shuffle” or
“Repeat” and then press jENTER.
3
Press jCursor l / h to select the desired
playback style.
Function
a
Skip forward during playback
b
Skip backward during playback
Shuffle:
• Select “Off” if you do not want to play back in
random order.
• Select “On” to play back music files in random
order.
k
Stop
p
Play
Repeat:
• Select “Off” if you do not want to play back
repeatedly.
• Select “One” to repeat each music file.
• Select “All” to repeat all music files in the folder.
APPENDIX
s
ADDITIONAL
INFORMATION
4
Press jCursor k / n / l / h to select a
music file to play back.
• To select a file or folder, press jCursor k / n.
• To confirm the selection, press jCursor h or
jENTER.
• To return to the previous menu, press j l.
a Shuffle and repeat icons
b
(playback)
c Album art (image of CD jacket, etc)
d Elapsed time
e Song title, artist name, album title
ADVANCED
OPERATION
If you have connected the USB storage device to this
unit before, playback of the music file played at the
last time automatically starts.
BASIC
OPERATION
Road to India
Symphony 01
Symphony 02
Symphony 03
Take–Hero
y
4
To exit the Option menu, press rOPTION.
37 En
English
• When the shuffle function is on, “
” appears on the GUI screen.
• When “Repeat” is set to “One” or “All”, “ 1 ” or “ ” appears on the
GUI screen.
Other functions
Using the sleep timer
3
Turn off the TV.
Other HDMI control devices are also turned off in
conjunction with the TV. If not, turn off them
manually.
4
Turn on the TV.
Other HDMI control devices are also turned on in
conjunction with the TV. If not, turn on them
manually.
5
Select this unit as the input source of the TV.
6
Turn on the HDMI control device (DVD player
or Blu-ray player) connected to this unit.
For this unit, check that the DVD player or Blu-ray
player is selected as an input source of this unit. If
not, select it as an input source.
For external devices, check that the TV screen shows
the playback picture of the player.
7
Check if the HDMI control function works
(turn on this unit or adjust the volume level
using the remote control of the TV).
The sleep timer is useful if you want to go to sleep while
this unit is playing or recording a source.
Press qSLEEP repeatedly to set the amount of
time.
Each time you press qSLEEP, the front panel display
changes as shown below.
Sleep 120min.
Sleep Off
Sleep 90min.
Sleep 30min.
Sleep 60min.
When the sleep timer is set, the SLEEP indicator on the
front panel display lights up.
Press qSLEEP on the remote control repeatedly until
“Sleep Off” appears on the front panel display.
Using the HDMI™ control function
You can operate the following functions of this unit with
the remote control of your TV when connecting this unit
and the TV (HDMI control function supported) with
HDMI.
• Turning on this unit or to the standby (conjunction with
TV)
• Adjusting the volume
• Selecting a device to reproduce TV sounds (this unit or
TV)
Please refer to the manual supplied with your TV and
check the following.
– The HDMI control function is enabled on your TV.
– This unit is appropriately connected to your TV.
y
• The HDMI control-compatible components include Panasonic VIERA
Link compatible TV, DVD player/recorder and Blu-ray Disc player.
• If you connect this unit and your DVD player, Blu-ray player or HD
DVD player (HDMI control function supported) with HDMI, you can
also control the device.
• We suggest that you use products (TV, DVD player, Blu-ray player or
HD DVD player) from the same manufacturer.
1
Turn on all devices connected to this unit
with HDMI.
For details, refer to the manual supplied with your
device.
2
Enable the HDMI control function on each
device.
For this unit, set “HDMI Control” to “On” (page 50).
For external devices, refer to the manual supplied
with each device to enable the HDMI control
function.
y
• You do not need to perform steps 1 through 2 from the next time.
38 En
Note
<Note>
• In case the HDMI control function does not work, check the
followings. Also, turning off (unplug) and turning on (plug) the TV
may be effective.
– “HDMI Control” is set to “On” on this unit.
– The HDMI control function is enables on the TV.
y
• This unit automatically selects the TV scene (page 23) when you
select this unit as the device to reproduce TV sounds using the
remote control of your TV. That is, if you connect an audio output
jack of your TV to the AV 1 (OPTICAL) jack of this unit, you can
enjoy TV sounds with the specified sound field program soon.
ADVANCED OPERATION
Setting the option menu for each input source (Option menu)
1
Press rOPTION on the remote control.
The Option menu for the selected input source is
displayed. For details about the Option menu items of
each input source, see “Option menu items” on this
page.
Option menu items
The following menu items are provided for each input
source.
Input
Source
Volume
Trim
Decoder
Mode
Extended
Surround
Signal Info
AV1-4
Volume
Trim
Decoder
Mode
Extended
Surround
Signal Info
AV 5-6
Volume
Trim
AUDIO1/2
Volume
Trim
V-AUX
Volume
Trim
PHONO
Volume
Trim
USB
Volume
Trim
Signal Info
Shuffle
Repeat
iPod (DOCK)
Volume
Trim
Shuffle
Repeat
Note
BLUETOOTH
(DOCK)
Volume
Trim
Connect/
Disconnect
Pairing
• In case jCursor k / n / l / h or other keys do not work after
closing the Option menu, press dInput selection key to
select the current input source again.
TUNER
Volume
Trim
FM Mode
Auto
Preset
PTY
Seek
EON
Volume
Trim
Video Out
Volume Trim
Decoder Mode
Extended Surround
Signal Info
Input
DSP
HDMI 1
Straight
Press jCursor k / n to select the desired
menu item and then press jENTER.
Parameters of the selected menu item are displayed.
Press jCursor k / n / l / h to select the
desired setting and then press jENTER
5
To exit the Option menu, press rOPTION.
To return to the previous menu, press jRETURN.
Clear
Preset
ADDITIONAL
INFORMATION
MULTI CH
Video Out
ADVANCED
OPERATION
4
BASIC
OPERATION
HDMI1-4
Option Menu
3
Menu item
PREPARATION
2
Rotate the RINPUT selector (or press
dInput selection key) to select the
desired input source.
INTRODUCTION
This unit has an Option menu of frequently used menu items for input sources compatible with this unit. The procedure
for setting the Option menu items is described below.
Details of the menu items are as follows:
y
APPENDIX
• The default settings are marked with “*”.
Volume Trim
Input source:
All
Adjustable range: –6.0dB to 0.0dB* to +6.0dB
(in 0.5 dB steps)
Reduces any change in volume when switching input
sources by correcting volume differences between input
sources.
You can set this parameter for each input source.
English
39 En
Setting the option menu for each input source (Option menu)
Decoder Mode
Input source: HDMI1-4, AV1-4
Choices:
Auto*, DTS
Selects DTS digital audio signals for reproduction.
Auto
DTS
Automatically selects audio input signals.
Selects DTS signals only. Other input signals
are not reproduced.
Extended Surround
Input source: HDMI1-4, AV1-4
Choices:
Auto*, PLIIxMovie, PLIIxMusic, EX/ES, Off
PLIIx
Movie
PLIIx
Music
EX/ES
Off
Automatically selects the most suitable
decoder according to whether a flag for
reproducing surround back channel is present,
and reproduces the signals in 6.1- or 7.1channel.
Always reproduces signals in 6.1- or 7.1channel using the PLIIxMovie decoder
whether or not surround back channel signals
are contained. You can select this parameter
when two surround back speakers are
connected.
Always reproduces signals in 6.1- or 7.1channel using the PLIIxMusic decoder whether
or not surround back channel signals are
contained. You can select this parameter when
one or two surround back speakers are
connected.
Automatically selects the most suitable
decoder for input signals whether or not the
flag for reproducing surround back channel is
present, and always reproduces signals in 6.1channel.
Always reproduces original signals whether or
not the flag for reproducing surround back
channel is present.
The sampling frequency per second in
analog-to-digital conversion.
Bitrate
The bit rate of input signal per second.
Notes
• “No Signal” is displayed when no signals are input and “---” is displayed
when signals that this unit cannot recognize are input.
• The bit rate may vary during playback.
• Video information
•
Selects whether to reproduce multi-channel input signals
in 6.1- or 7.1-channel when surround back speakers are
used.
Auto
Sampling
Frequency
Video In
Format and resolution of video input
signal.
Video Out
Format and resolution of video output
signal.
Message
Error messages about HDMI signals and
HDMI components. See the following for
details of the error messages.
• HDMI error message
(appears only when an error has occurred)
•
HDCP Error
HDCP authentication failed.
Device Over
The number of HDMI components
connected is over the limit.
Out of Res.
The connected monitor is not compatible
with the video input signal.
FM Mode
Input source: TUNER
Choices:
Stereo*, Mono
Sets FM broadcasting receiving mode.
Stereo
Mono
Receives in stereo mode.
Receives in monaural mode. You can get a
better reception in monaural mode.
Auto Preset
Signal Info
Input source: TUNER
Input source: HDMI1-4, AV1-4, USB
Automatically detects FM radio stations and registers
them as preset stations (page 30).
Displays information on audio and video signals on the
GUI screen and front panel display. You can change items
to be displayed using jCursor k / n.
• Audio information
Clear Preset
Input source: TUNER
Clears preset station (page 31).
•
Format
Format of digital audio signals.
PTY Seek
Input source: TUNER
Channel
40 En
The number of input signal channels
(front/surround/LFE).
For example, if input signal channels are
3 front channels, 2 surrounds and LFE,
“3/2/0.1” is displayed.
If a channel that cannot be expressed as
the above, a total number of channels
such as “5.1ch” may be displayed.
Searches a station that is broadcasting a program under the
desired category from the preset stations while using the
Radio Data System (page 32).
EON
Input source: TUNER
Enables you to receive the EON (enhanced other network)
data service of the Radio Data System (page 33).
Setting the option menu for each input source (Option menu)
Shuffle
Input source: iPod (DOCK), USB
Choices:
iPod (DOCK): Off*, Songs, Albums
USB: Off*, On
Repeat
Input source: iPod (DOCK), USB
Choices:
Off*, One, All
Changes the repeat playback style.
Connect / Disconnect
This function enables this unit to output video signals
when “AUDIO 1”, “AUDIO 2” or “MULTI CH” is
selected as the input source. Follow the procedure below
to select the video to be output during an audio
reproduction.
2
Press rOPTION on the remote control.
The Option menu for the selected input source is
displayed.
3
Press jCursor k / n to select “Video Out”
and then press jENTER.
Connects to or disconnects from a Bluetooth component.
Pairing
Input source: BLUETOOTH (DOCK)
Performs pairing of this unit and a Bluetooth component
(page 36).
Video Out
Input source: AUDIO 1/2, MULTI CH
Choices:
AV1 to AV6, V-AUX, Off*
Specifies a video signal to be output during an audio
reproduction. For details, see “Selecting a video signal to
be output during an audio reproduction” on this page.
Video;;;;;;Off
5
To exit the Option menu, press rOPTION.
ADDITIONAL
INFORMATION
Press jCursor l / h to select a video input
jack to be used during an audio
reproduction.
– AV1-2 (COMPONENT VIDEO)
– AV3-6 (VIDEO)
– V-AUX (VIDEO)
– Off (no video output)
ADVANCED
OPERATION
4
BASIC
OPERATION
Rotate the RINPUT selector (or press
dInput selection key) to select “AUDIO
1”, “AUDIO 2” or “MULTI CH” as the input
source.
PREPARATION
1
Input source: BLUETOOTH (DOCK)
INTRODUCTION
Changes the shuffle playback style.
Selecting a video signal to be output
during an audio reproduction
APPENDIX
English
41 En
Editing surround decoders/sound field programs
Setting sound field parameters
Although the field sound programs would satisfy you as
they are with the default parameters, you can arrange
sound effect or decoders suitable for acoustical conditions
of sources or rooms by setting the parameters.
Sound field parameters
y
• The default settings are marked with “*”.
CINEMA DSP basic parameters
y
DSP Level
• You cannot configure the parameters when “Memory Guard” is set to
“On” (page 52).
Adjustable range: –6dB to 0dB* to +3dB
1
Turn on the video monitor connected to this
unit.
2
Press iON SCREEN on the remote control.
The GUI screen appears on the video monitor.
3
Press jCursor n to select “Setup” and then
press jENTER.
4
Press jCursor k / n to select “DSP
Parameter” and then press jENTER.
Sound field program
Fine adjusts an effect level (level of the sound field effect
to be added). You can adjust the level of the sound field
effect while checking sound levels. Adjust “DSP Level” as
follows.
• The effect sound is too soft.
• There are no differences between effects of the sound
field programs.
→Increase the effect level.
• The sound is dull.
• The sound field effect is added too much.
→Reduce the effect level.
Dialogue Lift
Choices:
DSP Parameter
Program Name
Decode Type
DSP Level
P. Initial Delay
P. Room Size
Sur. Initial Delay
Sur. Room Size
Sound field parameters
5
6
Sci-Fi
PLIIx Movie
0dB
16ms
1.0
2ms
1.0
0* to 5
Use this feature to adjust the vertical position of the
dialogues in movies. The ideal position of the dialogues is
at the center of the video monitor screen.
Set values
Press jCursor k / n to select “Program
Name” and then press jCursor l / h to
select a sound field program to edit.
Press jCursor k / n to select a parameter to
edit and then press jCursor l / h to
change the setting.
For details on functions and adjustable ranges of the
sound field parameters, see “Sound field parameters”
on this page.
The ideal dialogue
position
If the dialogues are heard at the lower position of the video
monitor screen, increase the value of “Dialogue Lift”.
Move up to the ideal
dialogue position
y
• Repeat steps 5 and 6 to change other sound field program
parameters.
7
To turn off the GUI screen, press iON
SCREEN.
To initialize the parameters of the selected sound field
program, press jCursor n repeatedly to select
“Initialize” and then press jCursor h. Then, press
jCursor h again to execute the initialization or
jCursor l to cancel it.
When the value is set to zero, the position is at the lowest.
The position gets higher as you increase the value.
Notes
• This setting is available only when “Extra Speaker Assignment” is set to
“Presence” (page 48).
• You cannot move the dialogue position down from the initial dialogue
position.
3D DSP
Choices:
On*, Off
When CINEMA DSP 3D is enabled, sets whether to use
sound field programs in 3D mode.
42 En
Editing surround decoders/sound field programs
Note
Source sound
• This setting is available only when “Extra Speaker Assignment” is set to
“Presence” (page 48).
Early reflections
■
Parameters for adjusting early-reflected
sound
Level
Level
INTRODUCTION
Sound field parameters for advanced
configurations
Time
Time
Sound source
Initial Delay / P. Initial Delay / Sur. Initial Delay /
Sur. Back Initial Delay
Level
Early-reflected
sound
Time
Delay
Time
Delay
■
Large = 2.0
Parameters for defining attenuation
characteristics of early-reflected sound
Liveness / Sur. Liveness / Sur. Back Liveness
Adjustable range: 0 to 10
Adjusts the attenuation of reflected sound. You can create
a lively sound field (with a high reverberant sound level)
as you increase the value, and a dead sound field (with a
low reverberant sound level) as you decrease the value.
Creating either a lively sound field or a dead sound field in
an actual music hall is determined by the acoustic
absorption characteristics of reflection surfaces. A dead
sound field is created when the attenuation time is short
while a lively sound field is created when the attenuation
time is long.
ADVANCED
OPERATION
Level
Original source sound
Small = 0.1
BASIC
OPERATION
Adjusts attenuation characteristics of early-reflected
sound. You can create a lively sound field (with a high
reverberant sound level) as you increase the value, and a
dead sound field (with a low reverberant sound level) as
you decrease the value. Creating either a lively sound field
or a dead sound field in an actual music hall is determined
by the acoustic absorption characteristics of reflection
surfaces. A dead sound field is created when the
attenuation time is short while a lively sound field is
created when the attenuation time is long.
PREPARATION
Adjustable range: 1 to 99ms (Initial Delay / P. Initial Delay), 1 to
49ms (Sur. Initial Delay / Sur. Back Initial
Delay)
Sound source
Source sound
Small = 1ms
Large = 99ms
Dead
Time
Level
Level
Reflecting
surface
ADDITIONAL
INFORMATION
Live
Time
y
• We recommended that you adjust the size of corresponding sound field
when you adjust the delay time.
■
Parameters for specifying room size
Small reflected
sound
Adjustable range: 0.1 to 2.0
Small = 0
Large reflected
sound
APPENDIX
Room Size / P. Room Size / Sur. Room Size / Sur.
Back Room Size
Large = 10
English
Produces different senses of sound expansion according to
room sizes specified. In a large size room such as a music
hall, the duration from when reflected sound is heard until
when the next reflected sound is heard is long. Thus,
different senses of sound expansion can be created by
changing the duration. 1.0 is the original room size. When
this parameter is set to 2.0, each side of the room is
defined as twice larger than the original room size.
43 En
Editing surround decoders/sound field programs
Parameters for adjusting reverberant sound
Reverb Level
Adjustable range: 0 to100%
Reverb Time
Adjustable range: 1.0 to 5.0s
Reverb Time parameter adjusts the attenuation time of the
rear reverberant sound based on the time that about 1kHz
reverberant sound takes for 60dB of attenuation.
Reverberant sound attenuates faster as you decrease the
value. Reverb Time adjustment allows you to create a
natural reverberant sound, by setting the attenuation time
longer for a sound source or room with less echo, or
shorter for a sound source or room with more echo.
Rear reverberation
Source sound
Reverb Level parameter adjusts the reverberation sound
level. Increasing the value of Reverb Level makes the
reverbration sound level higher, which allows you to
create more echo.
Source sound
Level
■
(dB)
Reverb Level
Rear
reverberation
Early reflections
60dB
60dB
Time
Time
Time
Reverb Time
Reverb Time
Short
reverberation
Long
reverberation
Parameters for certain sound field
programs
■
Parameter for MOVIE sound field programs
Decode Type
Sound source
Choices:
Small = 1.0s
Large = 5.0s
PLIIx Movie (PLII Movie), Neo:6 Cinema
Selects the decoder type for use with the MOVIE sound
field programs.
Note
Reverb Delay
Adjustable range: 0 to 250ms
Level
Reverb Delay parameter adjusts the time difference
between the beginning of the direct sound and the
beginning of the reverberation sound. The larger the value,
the later the reverberation sound begins. Increasing the
value of Reverb Delay allows you to create a reverberant
sound in a wider area for the same Reverb Time.
• You cannot select a decoder for the following MOVIE sound field
programs.
– Mono Movie
– Sports
– Action Game
– Roleplaying Game
■
Parameter for 2ch Stereo
Direct
Choices:
Auto*, Off
Automatically bypasses the DSP circuit and tone control
circuit when an analog sound source is selected as the
input source. You can enjoy a higher quality sound.
Source sound
(dB)
Auto Outputs sound by bypassing the DSP circuit and
tone control circuit when the “Bass” and “Treble”
tone controls are both set to 0 dB.
Off Do not bypass the DSP circuit and tone control.
60dB
■
Reverberation
Time
Reverb Delay
Reverb Time
Parameters for 7ch Stereo
Center Level / Surround L Level / Surround R
Level / Surround Back Level / Presence L Level /
Presence R Level
Adjustable range: 0 to 100%
Adjusts the volume of the center, surround L/R, surround
back and presence L/R channels in the 7ch Stereo
program. The available parameters differ depending on the
setting of the speakers.
44 En
Editing surround decoders/sound field programs
■
Parameter for Straight Enhancer and 7ch
Enhancer
Effect Level
High*, Low
INTRODUCTION
Choices:
Adjusts the Compressed Music Enhancer effect level.
When the high-frequency signals of the source is
emphasized too much, set the effect level to “Low”. To
reduce the effect, set this parameter to “Low”.
Decoder parameters
■
PREPARATION
You can customize decoder effects by setting the
following parameters. For details about the types of
decoders, see “Surround decode mode” (page 28).
Parameter for PLIIx Music and PLII Music
Panorama
Choices:
Off*, On
BASIC
OPERATION
Adjusts the soundscape of the front sound field. Sends
stereo signals to the surround speakers as well as the front
speakers for a wraparound effect.
Dimension
Adjustable range: –3 to STD* to +3
ADVANCED
OPERATION
Adjusts the difference in level between the front sound
field and the surround sound field. You can adjust the
difference in level created by the software being played
back to obtain the preferred sound balance. The surround
sound gets stronger as you make the value more negative
and the front sound gets stronger as you make the value
more positive.
Center Width
Adjustable range: 0 to 3* to 7
■
ADDITIONAL
INFORMATION
You can spread the center sound toward left and right
according to your preference. Set this parameter to 0 for
outputting the center sound from the center speaker only,
or to 7 for outputting it from the front left/right speaker.
Parameter for Neo:6 Music
Center Image
Adjustable range: 0.0 to 0.3* to 1.0
Adjusts the front left and right channel output relative to
the center channel to make the center channel more or less
dominant as necessary.
APPENDIX
English
45 En
Operating various settings for this unit (Setup menu)
You can call the Setup menu using the remote control and change the settings of various menus.
For details, read “Basic operation of the Setup menu” first, and see the respective pages.
Menu/Submenu
Function
Page
Sets items for speakers.
47
Auto Setup (YPAO)
Automatically adjusts output characteristics of speakers.
47
Manual Setup
Speaker Setup
Manually adjusts output characteristics of speakers.
47
Speaker Configuration
Sets speaker configurations, such as connection status of speaker and a size of the
connected speaker (sound reproduction capacity), suitable for the listening
environment.
47
Speaker Level
Separately adjusts volume of each speaker.
49
Speaker Distance
Adjusts timing at which each speaker outputs sound based on distances between
speakers and the listening position.
49
Equalizer
Selects an equalizer that adjusts speaker output characteristics.
49
Test Tone
Generates test tones.
49
Sets various items for sound outputs.
49
Dynamic Range
Adjusts dynamic ranges of speakers and headphones.
49
Lipsync
Adjusts delay in output timing between video signals and audio signals.
50
HDMI Auto Lipsync
Sets on or off of automatic adjustments for delay between output timing between
video signals input from the HDMI jack and audio signals.
50
Auto Delay
Fine adjusts a delay time of HDMI Auto.
50
Manual Delay
Manually fine adjusts the delay of audio and visual output.
50
Sets various items for HDMI and display.
50
Sets various items for input sources.
50
HDMI Control
Selects on or off of the HDMI control function when a component that supports
the HDMI control function is connected with this unit.
50
Standby Through
Selects on or off of output of HDMI signals input from the HDMI 1-4 jacks to the
HDMI OUT jack when this unit is on standby.
50
Audio Output
Selects this unit or a component connected to the HDMI OUT jack of this unit for
reproducing sound signals.
50
Resolution
Sets resolution of the HDMI output that is converted from analogy visual input
signals.
50
Aspect
Set an aspect ratio of images reproduced by HDMI signals converted from analog
video input signals.
51
Sound Setup
Function Setup
HDMI
Sets items for a video monitor or the front panel display.
51
Sets brightness of the front panel display.
51
Front Panel Display Scroll
Selects the way to display characters on the front panel display.
51
GUI Position
Adjusts top and bottom positions of the GUI screen displayed on the video
monitor.
51
Display
Dimmer
Sets items for volumes.
51
Adaptive DRC
Adjusts the dynamic range (difference between the maximum volume and the
minimum volume) in conjunction with the volume level.
51
Max Volume
Sets the maximum volume level so that the volume will not be accidentally
increased.
51
Initial Volume
Volume
Sets the volume at the time this unit is turned on.
51
Input Rename
Changes input source names to be displayed on the GUI screen or the front panel
display.
52
Zone2
46 En
Sets the maximum volume level and initial volume level of Zone2.
52
Zone2 Max Volume
Sets the maximum volume level so that the volume will not be accidentally
increased.
52
Zone2 Initial Volume
Sets the volume at the time this unit is turned on.
52
Operating various settings for this unit (Setup menu)
Menu/Submenu
Function
Page
DSP Parameter
Sets parameters for the sound field programs.
52
Memory Guard
Protects some settings against accidental alteration.
52
5
The Setup menu screen appears on both the GUI screen
and front panel display.
GUI screen
PREPARATION
Setup Menu
Press jCursor k / n to select an item to edit
and then press jCursor l / h to change
the setting.
Some items in “Manual Setup” of “Speaker Setup”
take up a full screen. To display other items in
“Manual Setup”, press jCursor k / n.
Example (Speaker Configuration)
Speaker Setup
Sound Setup
Function Setup
DSP Parameter
Memory Guard
Speaker Configuration
Front Speaker
Small
INTRODUCTION
Basic operation of the Setup menu
Large
Front panel display
In this section, procedures of setting menus using the
video monitor are described.
Press iON SCREEN on the remote control.
The GUI screen appears on the video monitor.
2
Press jCursor n to select “Setup” and then
press jENTER.
The Setup menu appears on the video monitor.
3
Example (Function Setup)
6
To turn off the GUI screen, press iON
SCREEN.
Note
• In case jCursor k / n / l / h or other keys do not work after
closing the Option menu, press dInput selection key to
select the current input source again.
Speaker Setup
You can set various items for speakers. Two kinds of
adjustments are available. One is “Auto Setup” (YPAO)
for automatic adjustment and another is “Manual Setup”
for manual adjustment.
y
• The default settings are marked with “*”.
Auto Setup
Function Setup
Automatically adjusts output characteristics of speakers to
obtain optimum balance for the output sound based on
positions and performances of the speakers and acoustic
characteristics or the room, which are automatically
measured. For details on operations, see page 20.
HDMI
Display
Volume
Input Rename
Zone2
• To return to the previous menu, press jRETURN.
4
If necessary, press jCursor k / n to select
the desired submenu then press jENTER.
Example (Volume)
Volume
Off
+16.5dB
Off
Adjusts output characteristics of speakers based on
manually set parameters.
After “Auto Setup” (YPAO) is performed, you can check
automatically adjusted parameters in the “Manual Setup”
menu. Fine adjust the parameters for your preference if
necessary.
■ Speaker Configuration
Sets speaker configurations, such as connection status of
speaker and a size of the connected speaker (sound
reproduction capacity), suitable for the listening
environment.
47 En
English
Adaptive DRC
Max Volume
Initial Volume
Manual Setup
APPENDIX
y
ADDITIONAL
INFORMATION
Press jCursor k / n to select the desired
menu then press jENTER.
Items of the selected menu are displayed.
• To configure other items, repeat step 5.
ADVANCED
OPERATION
1
BASIC
OPERATION
;SpeakerSetup
y
Operating various settings for this unit (Setup menu)
y
Note
• The speaker configuration includes items for defining a speaker size:
“Large” or “Small”. “Large” and “Small” refer to speakers with woofer
diameters 16 cm or larger and smaller than 16 cm, respectively.
• If “LFE / Bass Out” is set to “Front”, “Front Speaker” automatically
switches to “Large” even when it is set to “Small”.
Extra Speaker Assignment
Center Speaker
Choices:
Choices:
Zone2*, Presence, None
None, Small*, Large
Selects the application for the EXTRA SP terminals.
Sets the size of center speaker.
Zone2
None
Assigns the EXTRA SP terminals for the
speakers in the second zone.
Assigns the EXTRA SP terminals for the
presence speakers.
Disables the EXTRA SP terminals.
Presence
None
Small
Note
• When setting “Extra SP Assign” to “Zone2” or “Presence”, the surround back
channel signals for main output is separately output from other channels.
Large
LFE / Bass Out
Choices:
Subwoofer, Front, Both*
Select this when no center speaker is
connected. Center channel signals are spread
to front left and right speakers.
Select this when a small center speaker is
connected. Low-frequency components of
center channel are output from a subwoofer.
If a subwoofer is not connected they are
output from front speakers.
Select this when a large center speaker is
connected.
Selects speaker(s) for outputting low-frequency
components of the LFE (low-frequency effect sound)
channel or other channels. The output status is as follows.
Surround Speaker
LFE channel signals
None
Parameter
Subwoofer
Front
speakers
Choices:
Other
speakers
Subwoofer
Output
Not output
Not output
Front
Not output
Output
Not output
Both
Output
Not output
Not output
Small
Low-frequency components of other channel signals
Parameter
Subwoofer
Front
speakers
Other
speakers
None, Small*, Large
Sets sizes of left and right surround speakers.
Large
Select this when no surround speakers are
connected. Surround channel signals are
spread to front left and right speakers.
“Surround Back Speaker” automatically
switches to “None” when this is selected.
Select this when small surround speakers are
connected. Low-frequency components of
surround channels are output from a
subwoofer. If a subwoofer is not connected
they are output from front speakers.
Select this when large surround speakers are
connected.
Subwoofer
[1]
[2]
[2]
y
Front
Not output
[3]
[2]
• When “None” is selected, the sound field programs automatically enter
the Virtual CINEMA DSP mode.
Both
[3]
[4]
[2]
Surround Back Speaker
Choices:
[1]
[2]
[3]
[4]
Outputs low-frequency components of the channel of speaker,
the size of which is set to “Small”.
Outputs low-frequency components when the sizes of speakers
are set to “Large”.
Outputs low-frequency components of the front left and right
channels and the channel of speaker, the size of which is set to
“Small”.
Outputs low-frequency components of the front left and right
channels.
Front Speaker
Choices:
Small, Large*
Sets the sizes of front left and right speakers.
Small
Large
48 En
Select this when small speakers are
connected. Low-frequency components of the
front left and right channels are output from a
subwoofer.
Select this when large speakers are
connected.
None, Large x 1, Small x 1, Large x 2, Small x 2*
Sets sizes of left and right surround back speakers.
None
Large x 1
Small x 1
Large x 2
Small x 2
Select this when no surround back speaker
are connected. Surround back channel signals
are output from the surround L/R speakers
and subwoofer. If the subwoofer is disabled,
they are output from the surround L/R
speakers and front speakers.
Select this when one large surround back
speaker is connected.
Select this when one small surround back
speaker is connected.
Select this when two large surround back
speakers are connected.
Select this when two small surround back
speakers are connected.
y
• When “Surround Back Speaker” is set to “None”, “PLIIx Movie”,
“PLIIx Music” and “PLIIx Game” of the surround decode mode
(page 28) are not available.
Operating various settings for this unit (Setup menu)
Bass Crossover Frequency
Choices:
40Hz, 60Hz, 80Hz*, 90Hz, 100Hz, 110Hz, 120Hz,
160Hz, 200Hz
Subwoofer Phase
Normal*, Reverse
Sets the phase of your subwoofer if bass sounds are
lacking or unclear.
Normal
Reverse
Speaker Level
Adjustable range: –10.0dB to +10.0dB (0.5dB step)
Defaults:
0dB (FR.L, FR.R, SWFR, PR.L, PR.R)
–1.0dB (CNTR, SUR.L, SUR.R, SBL, SBR)
y
• When only one surround back speaker is connected, “SB” appears
instead of “SBL” and “SBR”.
• You can adjust the volume listening to test tones when you set “Test
Tone” to “On” (on this page).
• If your subwoofer has a volume control or a crossover frequency control,
set the volume to half or the crossover frequency at the maximum.
Unit
Choices:
meters (m)
feet (ft)
meters (m)*, feet (ft)
Displays the speaker distance in meters.
Displays the speaker distance in feet.
GEQ
Off
Uses a parametric equalizer selected in
“Auto Setup”. Characteristics of the
currently used parametric equalizer are
displayed below “Auto PEQ”.
Uses a graphic equalizer. Press jENTER
to adjust the characteristics of the graphic
equalizer.
Not use a graphic equalizer.
GEQ
Channels
Front Left, Front Right, Center, Surround Left,
Surround Right, Surround Back Left, Surround
Back Right
Choices:
63Hz, 160Hz, 400Hz, 1kHz, 2.5kHz, 6.3kHz,
16kHz
Adjustable range: –6.0dB to 0dB* to +6.0dB (0.5dB step)
Adjusts sound quality of each speaker using a graphic
equalizer. The graphic equalizer of this unit can adjust
signal levels in 7 frequency ranges.
To adjust the signal level within each range, press
jCursor l / h to select the desired speaker while
“Channel” is selected, press jCursor k / n to select the
desired frequency band and then press jCursor l / h
to adjust the signal level.
■
Test Tone
Choices:
Off*, On
Switches between on and off of an oscillator that generates
test tones. When “On” is selected, you can adjust the
settings of “Manual Setup” while listening to a test tone.
Off
On
Not generate test tones.
Generates test tones.
Sound Setup
You can set various items for sound outputs.
■
Dynamic Range
Choices:
Min/Auto, STD, Max*
Selects the dynamic range adjustment method for
reproducing bitstream signals.
Adjustable range: 0.30m to 24.00m (1.0ft to 80.0ft)
Defaults:
3.00m (10.0ft) (FR.L, FR.R, SWFR, PR.L,
PR.R)
2.60m (8.5ft) (CNTR)
2.40m (8.0ft) (SUR.L, SUR.R, SBL, SBR)
Min/Auto
y
49 En
English
STD
(Min) Sets the dynamic range suitable for
low volume or a quiet environment, such as
at night, for bitstream signals except for
Dolby TrueHD signals.
(Auto) Adjusts the dynamic range for Dolby
TrueHD signals based on input signal
information.
Sets the standard dynamic range
recommended for regular home use.
APPENDIX
FR.L / FR.R / CNTR / SUR.L / SUR.R / SBL / SBR /
SWFR / PR.L / PR.R
• Available items differ depending on the “Speaker Configuration” settings
(page 47).
• When only one surround back speaker is connected, “SB” appears
instead of “SBL” and “SBR”.
ADDITIONAL
INFORMATION
■ Speaker Distance
Adjusts timing at which each speaker outputs sound so
that sounds from speakers reach the listening position at
the same time. Set unit (Unit) first and set the distance of
each speaker.
Auto PEQ
ADVANCED
OPERATION
Separately adjusts volume of each speaker so that the
sounds form speakers are at the same volume at the
listening position. Items to be displayed vary depending
on the number of speakers connected.
Auto PEQ, GEQ*, Off
BASIC
OPERATION
■
Select this not to change the phase of your
subwoofer.
Select this to reverse the phase of your
subwoofer.
Choices:
Selects an equalizer type.
PREPARATION
Choices:
EQ Type Select
INTRODUCTION
Sets the lower limit of the low-frequency component
output from a speaker with a size set to “Small” (Small x
1, Small x 2) Sound with a frequency below that limit is
output from a subwoofer or front speakers.
If your subwoofer has a volume control or a crossover
frequency control, set the volume to half or the crossover
frequency at the maximum.
■ Equalizer
Adjusts sound quality and tone using a parametric graphic
equalizer.
Operating various settings for this unit (Setup menu)
Max
Outputs sound without adjusting the
dynamic range of the input signals.
■ Lipsync
Adjusts delay between video output and audio output.
HDMI Auto Lipsync
Choices:
Off*, On
Automatically adjusts output timing of audio and video
signals when a TV that supports an automatic lip-sync
function is connected to this unit.
Off
Select this when the connected TV does not
support the automatic lip-sync function or
you do not use the automatic lip-sync
function. Set the correction time in “Manual
Delay”.
Select this when the connected TV supports
the automatic lip-sync function. Fine adjust
the correction time in “Auto Delay”.
On
Auto Delay
Adjustable range: 0* to 240ms (1 ms step)
Fine adjust the correction time when “HDMI Auto
Lipsync” is set to “On”. The actual correction time is
displayed under in “Auto Delay” field and an offset time
set by the user in “Offset” field.
Manual Delay
Adjustable range: 0* to 240ms (1 ms step)
Manually fine adjusts the correction time. Select this when
the connected TV does not support the automatic lipsync
function or you set “HDMI Auto Lipsync” to “Off”.
Function Setup
You can set various items for HDMI and display.
You can set items for HDMI.
HDMI Control
Choices:
On, Off*
Selects on or off of the HDMI control function when a
component that supports the HDMI control function is
connected with this unit. When this parameter is set to
“On”, this unit output signals input from the HDMI 1-4
jacks to the video monitor even when this unit is on
standby.
On
Off
y
Enables the HDMI control function.
Disables the HDMI control function.
• The BHDMI THROUGH indicator lights up in the following cases
while this unit is on standby.
– when the HDMI control function is on
– when the HDMI signal standby-through function is currently working
• When “HDMI Control” is set to “On”, this unit consumes 1 to 3 watts of
power depending on a condition of an HDMI signal passing through this
unit.
50 En
Standby Through
Choices:
On, Off*
Selects on or off of output of HDMI signals input from the
HDMI 1-4 jacks to the HDMI OUT jack when this unit is
on standby. When this parameter is set to “On”, this unit
output signals input from the HDMI 1-4 jacks to the video
monitor even when this unit is on standby.
On
Outputs the HDMI signals to the HDMI OUT
jack.
Not output the HDMI signals to the HDMI
OUT jack.
Off
y
• This parameter is not available when “HDMI Control” is set to “On”.
• To enables HDMI signal standby-through output, any one of the input
sources connected to the HDMI 1-4 jacks must be selected before
switching to standby.
• When “Standby Through” is set to “On”, the BHDMI THROUGH
indicator lights up. In this state, this unit consumes up to 3 watts of power
even on standby.
■
Audio Output
Choices:
Amplifier*, TV, Amplifier + TV
Selects this unit or a component connected to the HDMI
OUT jack of this unit for reproducing sound signals input
from the HDMI 1-4 jacks.
Amplifier
Outputs HDMI sound signals form the
speakers connected to this unit.
TV
Outputs HDMI sound signals from the
speakers of a TV connected to this unit.
Sound output from the speakers connected to
this unit is muted.
Amplifier + Outputs HDMI sound signals from the
TV
speakers connected to this unit and the
speakers of a TV connected to this unit.
Note
• Signal formats of audio and visual signals output from this unit to the TV
vary depending on specifications of the monitor.
HDMI
■
■
y
• This parameter is not available when “HDMI Control” is set to “On”.
■
Resolution
Choices:
Through*, 480p(576p), 720p, 1080i, 1080p
Upscales the resolution of HDMI output that is converted
from analog video input signals and output from the
HDMI OUT jack.
Notes
• Resolution of the HDMI output converted from 720p or 1080i analog
video signals cannot be upscaled.
• When a video monitor is connected to the HDMI OUT jack of this unit,
this unit automatically detects a resolution that the monitor supports. An
asterisk (*) appears on the left of the detected resolution.
• If this unit cannot detect the resolution that the monitor supports, set
“MON.CHK” in the advanced setup menu to “SKIP” (page 57) and try
again.
Operating various settings for this unit (Setup menu)
Through*, 16:9, Smart Zoom
Through
■
Adaptive DRC
Choices:
Notes
You can set items for a video monitor and the front panel
display.
Auto
Off
Auto
Input level
Volume : low
Auto
Off
Off
Input level
Volume : high
Adjusts the dynamic range automatically.
Not adjust the dynamic range automatically.
y
BASIC
OPERATION
• You cannot change the aspect ratio of the screen when “Resolution” is set
to “Through”.
• This setting is not effective for inputs with the aspect ratio other than 4:3.
• You cannot obtain an effect of the aspect ratio when visual signals are
input from the HDMI 1-4 jacks or when 720p, 1080i or 1080p signals are
input.
Display
Auto, Off*
Adjust the dynamic range in conjunction with the volume
level. This feature is useful when you are listening at
lower volumes or at night. When this function is enabled,
the dynamic range is adjusted as follows.
When the volume level is low: narrow the dynamic range
When the volume level is high: widen the dynamic range
PREPARATION
Outputs the video signals without changing
the aspect ratio.
16:9
Outputs the video signals that displays 4:3
images on a 16:9 TV with black bands on
the right and left sides of the TV screen.
Smart Zoom Outputs the video signals that displays 4:3
images on a 16:9 TV by stretching right and
left of images to fit on the TV screen.
You can set items for volumes.
INTRODUCTION
Sets a horizontal to vertical ratio (aspect ratio) of images
reproduced by HDMI signals output from the HDMI OUT
jack when the HDMI signals are converted from analog
video input signals by a video conversion function.
Volume
Output level
Aspect
Choices:
Output level
■
• This setting is also effective for headphones.
Dimmer
Adjustable range: –4 to 0*
Note
• The brightness of display does not become bright in Pure Direct mode
even if the value is increased.
Choices:
Continuous*, Once
Selects the way to scroll the screen when a total number of
characters exceed a display area of the front panel display.
Continuous
Once
Repeatedly displays all characters by
scrolling.
Displays all characters by scrolling once,
halts scrolling and then displays first 14
characters.
■
Initial Volume
Adjustable range: Off*, Mute, –80.0dB to +16.5dB (0.5 dB step)
Sets the volume at the time this unit is turned on. When
this parameter is set to “Off”, the volume level used when
this unit was set to standby is applied.
Note
• When you set “Max Volume” and “Initial Volume” the setting of “Max
Volume” becomes effective. For example, when you set “Max Volume”
to “–30.0dB” and “Init. Volume” to “0.0dB”, the volume is
automatically set to “–30.0dB” at the next time this unit is turned on.
APPENDIX
GUI Position
Sets the maximum volume level so that the volume will
not be accidentally increased. For example, you can adjust
the volume between –80.0 dB and –5.0 dB (or Mute) when
you set this parameter to “–5.0dB”. The volume increases
to the maximum level when this parameter is set to +16.5
dB (default).
ADDITIONAL
INFORMATION
Front Panel Display Scroll
Max Volume
Adjustable range: –30.0dB to +15.0dB, +16.5dB* (5.0 dB step)
ADVANCED
OPERATION
Sets brightness of the front panel display. As the value is
lowered, the brightness of the front panel display is
darkened.
■
Adjustable range: –5 to 0* to +5
Adjusts the position of the GUI screen displayed on the
video monitor. To move the screen up (or to the right), set
this value larger. To move the screen down (or to the left),
set this value smaller.
English
51 En
Operating various settings for this unit (Setup menu)
Input Rename
DSP Parameter
Changes input source names to be displayed on the front
panel display.
Selecting a name to be displayed from templates
Press jCursor k / n to select the input source name to
edit and then press jCursor l / h to select a new
name from the following templates.
– Blu-ray
– DVD
– SetTopBox
– Game
– TV
– DVR
– CD
– CD-R
– Satellite
– VCR
– Tape
– MD
– PC
– iPod
– HD DVD
– “blank”
Entering an original name
Press jCursor k / n to select the input source name to
edit and then press jENTER. Enter up to 9 characters
by selecting one character at a time with the following key
operations.
jCursor l / h
jCursor k / n
jENTER
Selects a character to edit.
Selects a character to enter.
Enters a selected character.
The following characters are available for input.
A to Z, 0 to 9, a to z, symbols (#, *, –, +, etc.) and space
Zone2
Sets the maximum volume level and initial volume level
of Zone2.
y
• These parameters are available only when “Extra Speaker Assignment”
is set to “Zone2” (page 48).
■
Zone2 Max Volume
Adjustable range: –30.0dB to +15.0dB, +16.5dB* (5.0 dB step)
Sets the maximum volume level of Zone2, so that the
volume will not be accidentally increased. For example,
you can adjust the volume between –80.0 dB and –5.0 dB
when you set this parameter to “–5.0dB”.
■
Zone2 Initial Volume
Adjustable range: Off*, Mute, –80.0dB to +16.5dB (0.5 dB step)
Use this feature to set the volume level of Zone2 when the
power of Zone2 unit is turned on. When this parameter is
set to “Off”, the volume level used at the time when the
Zone2 unit was set to standby is applied.
Note
• If you set “Zone2 Max Volume” and “Zone2 Initial Volume”, the setting
of “Zone2 Max Volume” becomes effective. For example, if you set
“Zone2 Max Volume” to “–30.0dB” and “Zone2 Initial Volume” to
“0.0dB”, the volume is automatically set to “–30.0dB” at the next time
the Zone2 unit is turned on.
52 En
You can set parameters for the sound field programs. For
details, see page 42.
Memory Guard
Choices:
Off*, On
Protects the Setup menu settings against accidental
alteration.
Off
On
Not protect settings.
Protects the Setup menu settings (except for
“Decode Type” in “DSP Parameter” and
“Memory Guard”).
Note
• When this parameter is switched to “On”, “
corner of the Setup menu screen.
” appears at the top left
Using multi-zone configuration
Only analog signal can be sent to the second zone. If you want to output sounds to Zone2, connect an external
component to the AV5-6, AUDIO1-2 or VIDEO AUX (AUDIO) jacks (by analog connection). For example, if you
want to output sound from an HDMI DVD player to the second zone, you must connect the HDMI DVD player to this
unit by both HDMI and analog connections.
y
Connect the speakers in the second zone to the EXTRA
SP terminals and then set “Extra Speaker Assignment” to
“Zone2” (page 48).
Using an external amplifier
Connect an amplifier/receiver in the second zone and
other components to this unit as follows.
ADDITIONAL
INFORMATION
From the ZONE2 OUT jacks
EXTRA SP ZONE2/PRESENCE
Amplifier
Second zone
(Zone2)
Main zone
Second zone
(Zone2)
DVD player (etc.)
ADVANCED
OPERATION
• Since there are many possible ways to connect and use this unit in a
multi-zone configuration, we recommend that you consult with your
nearest authorized Yamaha dealer or service center about the Zone2
connections that best meet your requirements.
• Some Yamaha models can be directly connected to the REMOTE jacks
of this unit. You may not need use an infrared signal emitter for these
products. Up to 6 components can be connected using monaural analog
mini cables or via an IR flashers. For details about connections, see
“Transmitting/receiving remote control signals” (page 17).
Important safety notice
The EXTRA SP terminals of this unit should not be
connected to a Passive Loudspeaker Selector Box or
more than one loudspeaker per channel.
Connection to a Passive Loudspeaker Selector Box or
multiple speakers per channel could create an
abnormally low impedance load resulting in amplifier
damage. See this owner’s manual for correct usage.
Compliance with minimum speaker impedance
information for all channels must be maintained at all
times. This information is found on the back panel of
your unit.
BASIC
OPERATION
You need the following additional equipment to use the
multi-zone functions of this unit:
• An infrared signal receiver in the second zone.
• An infrared signal emitter in the main zone. This emitter
transmits infrared signals from the remote control to a
CD player or a DVD player, etc. in the main zone via
the infrared signal receiver in the second zone.
• An amplifier and speakers in the second zone.
PREPARATION
Using the internal amplifier of this unit
Connecting Zone2
INTRODUCTION
This unit allows you to configure a multi-zone audio system. This feature allows you to set this unit to reproduce separate
input sources in the main zone and the second zone (Zone2). You can control this unit from the second zone using the
supplied remote control.
This unit
Main zone
Remote control
y
This unit
From the REMOTE OUT jack
Infrared signal
receiver
• You can use the speakers connected to EXTRA SP terminals as the front
speaker system of another zone.
• When you use the internal amplifiers for the Zone2 speakers, you can
adjust the volume level and set the initial volume and maximum volume
of the Zone2 speakers (page 52).
APPENDIX
Infrared signal
emitter
To the REMOTE IN jack
Note
• To avoid unexpected noise, DO NOT USE the Zone2 feature with CDs
encoded in DTS.
English
53 En
Using multi-zone configuration
Controlling Zone2
You can select and control Zone2 by using the control
keys on the front panel or on the remote control. The
available operations are as follows:
• Selecting the input source.
• Tuning into the desired station (when “TUNER” is
selected as the input source)
• Adjusting the volume of Zone2 (when Zone2 speakers
are connected to the EXTRA SP terminals).
Switching to the Zone2 operation mode
Before controlling Zone2 by using the control keys on the
front panel or on the remote control, follow the procedure
below to switch this unit to the Zone2 operation mode.
■
To control Zone2 by using the front panel
control keys
Press CZONE2 CONTROL while Zone2 is
turned on.
The ZONE2 indicator flashes on the front panel display
for approximately 10 seconds.
ZONE
2
Flashes
Note
• Complete each step while the ZONE2 indicator is flashing on the front
panel display. Otherwise, the Zone2 mode is automatically canceled and
this unit returns to the main zone operation mode.
■
To control Zone2 by using the remote control
Switch bMAIN/ZONE2 to the “ZONE2”
position.
Operations in the Zone2 operation mode
■
Turning on or set Zone2 to standby
Press AZONE2 ON/OFF (or pPOWER).
■
Operating Zone2
Rotate the RINPUT selector (or press dInput
selection key) to select the desired input
source.
• Select “AV5”, “AV6”, “AUDIO1”, “AUDIO2”, “VAUX” or “PHONO” to listen to the input source in
Zone2.
• Select “TUNER” to use the FM/AM radio features
(page 30) in Zone2.
• Select “USB” to use the USB features (page 37) in
Zone2.
• Select “DOCK” to use the iPod features (page 34) or
Bluetooth features (page 36) in Zone2.
54 En
Controlling other components with the remote control
You can control external components for a selected input source with the remote control. The keys available for
controlling external components are as follows:
Input source
jCursor, ENTER, RETURN
Operates the menus of external components.
kExternal component operation keys
Function as a recording or playback key of an external
component, or a menu display key.
mTV control keys
Switches visual inputs of TV
Mutes audio of TV
Controls the volume of TV
Switches channels of TV
Turns on and off TV
[USB]
—
—
—
[DOCK]
DOCK
Yamaha
5011
[TUNER]
Tuner
Yamaha
5007
[MULTI]
—
—
—
“—” indicates no assignment
y
• An external component controlled by the remote control is automatically
selected according to selection of the scenes (page 23).
Setting remote control codes
tDISPLAY
Switches between the screens of external components.
y
The following remote control codes are assigned to input
sources as factory default settings. For a complete list of
available remote control codes, refer to “List of remote
control codes” at the end of this manual.
You can control other components by setting the
appropriate remote control codes. For a complete list of
available remote control codes, refer to “List of remote
control codes” at the end of this manual.
You should perform each step within 1 minute after the
previous step.
Press oCODE SET on the remote control
using a pointed object such as the tip of a
ballpoint pen.
nTRANSMIT blinks twice.
2
Press the desired dInput selection key.
3
Press lNumeric keys to enter a remote
control code.
Once the remote control code is registered,
nTRANSMIT blinks twice. If it fails,
nTRANSMIT blinks six times. Repeat from
step 1.
Default remote control code settings
Input source
Category
Manufacturer
Default
code
Resetting all remote control codes
[HDMI 1]
Blu-ray Disc
Yamaha
2018
[HDMI 2]
—
—
—
[HDMI 3]
—
—
—
[HDMI 4]
—
—
—
Note
—
• This operation also clears the programmed function of each key
(page 56).
—
—
[AV 2]
—
—
—
[AV 3]
CD
Yamaha
5013
[AV 4]
—
—
—
[AV 5]
—
—
—
—
—
—
[AUDIO 1]
—
—
—
[AUDIO 2]
—
—
—
[V-AUX]
—
—
—
[PHONO]
—
—
—
1
Press oCODE SET on the remote control
using a pointed object such as a tip of a
ballpoint pen.
nTRANSMIT blinks twice.
2
Press iON SCREEN.
3
Press lNumeric keys to enter “9981”.
Once the initialization is complete, nTRANSMIT
blinks twice. If it fails, nTRANSMIT blinks six
times. Repeat from step 1.
55 En
English
[AV 6]
You can reset all remote control codes to the factory
default settings.
APPENDIX
[AV 1]
ADDITIONAL
INFORMATION
1
ADVANCED
OPERATION
• You can use mTV control keys only for controls of TV regardless
of selected input sources.
• You need to set the remote control code first to control external
components.
• The remote control keys for controlling external components are
available only when the external components have corresponding control
keys.
■
Default
code
BASIC
OPERATION
INPUT
MUTE
TV VOL +/–
TV CH +/–
POWER
Manufacturer
PREPARATION
lNumeric keys
Function as numeric keys of an external component.
Category
INTRODUCTION
cSOURCE POWER
Turns on and off an external component.
Controlling other components with the remote control
Programming from other remote
controls
You can program remote control codes from other remote
controls. Use this feature if you want to program functions
not included in the basic operations covered by the remote
control codes, or an appropriate remote control code is not
available.
6
y
• Repeat steps 4 thorough 6 to assign a function to another key.
7
Note
<Note>
• Each of the steps described in this section should be performed within
one minute after the last step. If the next operation is not performed
within one minute, the programming operation is canceled. In this case,
start again from the beginning.
Programming the remote control of this unit
You can program the remote control to make functions of
an external component operable with the following keys.
You can assign functions to these keys for each input
source as with remote control codes.
cSOURCE POWER
kExternal component operation keys
lNumeric keys
y
• The remote control transmits infrared rays. If the remote control of the
external component also uses infrared rays, this remote control can learn
most of its functions. The remote control may not recognize special or
consecutive signals.
• The keys may not operate the assigned functions depending on operating
conditions of this unit.
1
Press oCODE SET on the remote control
using a pointed object such as the tip of a
ballpoint pen.
nTRANSMIT blinks twice.
Press the key on the remote control of the
external component.
If the learning process is complete, nTRANSMIT
blinks twice. If it fails, nTRANSMIT blinks six
times. Repeat from step 4.
To end the operation, press oCODE SET
again.
nTRANSMIT blinks once.
Clearing the assignment of each key
1
Press oCODE SET on the remote control
using a pointed object such as the tip of a
ballpoint pen.
nTRANSMIT blinks twice.
2
Press the desired dInput selection key.
3
Press lNumeric keys to enter “9991” .
4
Press a key you want to reset.
If the key assignment is cleared, nTRANSMIT
blinks twice. If it fails, nTRANSMIT blinks six
times. Repeat from step 1.
y
• Repeat step 4 to clear another key assignment.
5
To end the operation, press oCODE SET
again.
nTRANSMIT blinks once.
2
Press the desired dInput selection key.
3
Press lNumeric keys to enter “9990” .
1
4
Press a key to which you want to assign the
function.
nTRANSMIT lights up and this unit enters a wait
state to receive remote control signals. Perform steps
5 and 6 within 10 seconds.
Press oCODE SET on the remote control
using a pointed object such as the tip of a
ballpoint pen.
nTRANSMIT blinks twice.
2
Press the desired dInput selection key.
Note
3
Press lNumeric keys to enter “9992” .
If the key assignments are cleared, nTRANSMIT
blinks twice. If it fails, nTRANSMIT blinks six
times. Repeat from step 1.
<Note>
5
• If 10 seconds pass after this unit enters the wait state, a timeout
error occurs and nTRANSMIT turns off. In this case, repeat
from step 4.
Place the remote control about 5 to 10 cm
apart from the remote control of the external
component on a flat surface so that their
infrared transmitters are aimed at each other.
Remote control of external component
MAIN
ZONE2
TRANSMIT
SLEEP
3
HDMI
1
2
USB
1
2
POWER
SOURCE
6
AV
PHONO
3
CODE SET
4
POWER
2
4
DOCK
TUNING
MULTI
AUDIO
PRESET
RADIO
ENHANCER SUR. DECODE
1
AM
5
MEMORY
CD
STEREO
VOLUME
STRAIGHT PURE DIRECT
V-AUX
FM
TUNER
INFO
TV
MUSIC
OPTION
DISPLAY
SCENE
MOVIE
ENTER
BD
DVD
ON SCREEN
RETURN
5 to 10 cm
56 En
Clearing the assignments of all keys
Advanced setup
Set this unit to standby.
2
While holding down OSTRAIGHT on the
front panel, press KMAIN ZONE ON/OFF.
Keep holding down OSTRAIGHT until
“ADVANCED SETUP” appears on the front panel
display.
4
Press OSTRAIGHT repeatedly to change
the selected parameter setting.
To change other settings, repeat steps 3 and 4.
5
Press KMAIN ZONE ON/OFF to set this
unit to standby.
The settings you made are reflected next time you
turn on this unit.
ADVANCEDSETUP
3
y
• Set values are placed in XXX of the following parameters on an
actual display screen.
SP IMP. -XXX
Choices:
6ΩMIN, 8ΩMIN*
REMOTE ID -XXX
Choices:
ID1*, ID2
BI AMP - XXX
Choices:
ON, OFF*
Switches on and off of bi-amp connection of main
speakers. For bi-amp connection, see page 12.
SCENE IR -XXX
Choices:
ON*, OFF
Updates the firmware of this unit. To update the firmware,
select “FIRM UPDATE” and then press OSTRAIGHT.
Notes
• Do not use this feature unless you need to update the firmware.
• Be sure to read information supplied with updates before updating the
firmware.
VERXXX.XXX.XXX
Displays the firmware of this unit.
Setting a remote control ID
Two IDs are provided for the remote control of this unit. If
another Yamaha amplifier is in the same room, setting a
different remote control ID to this unit prevents unwanted
operation of the other amplifier.
“ID1” is set for both the main unit and remote control by
default. If you have changed the remote control ID, make
sure that you select the same ID for the main unit in the
the advanced setup menu.
1
Press oCODE SET on the remote control
using a pointed object such as the tip of a
ballpoint pen.
nTRANSMIT blinks twice.
2
Press iON SCREEN.
MON.CHK - XXXX
Choices:
YES*, SKIP
Adds upscaling limitation on output signals to a video
monitor connected to this unit via the HDMI OUT
jack.
Choices:
English
INIT-XXXXXXXXX
APPENDIX
Selects whether or not to transmit the control signals
to an external component connected to the REMOTE
OUT jack on this unit when BD/DVD or CD SCENE
function is selected.
FIRM UPDATE
ADDITIONAL
INFORMATION
Sets a remote control ID. When using multiple
Yamaha AV receivers, you can operate them with a
single remote control by setting the receiver IDs to
the same setting.
You can check the firmware of this unit and update the
firmware using the USB port on the front panel.
Select the following parameter in step 3 above.
ADVANCED
OPERATION
Selects output impedance of this unit according to
connected speakers. When you connect 4-ohm
speakers to the FRONT speaker terminals, set “SP
IMP.” to “6ΩMIN.”.
Updating the firmware
BASIC
OPERATION
Rotate the NPROGRAM selector to select
the parameter you want to change.
The default setting are marked with “*”.
PREPARATION
1
INTRODUCTION
DSP PARAM All parameters of sound field
programs
VIDEO
Video conversion settings (resolution/
aspect) in the Setup menu and the GUI
display position
ALL
All
CANCEL
Cancellation of initialization
In the advanced setup menu, you can set basic operations
of this unit, such as on and off of a bi-amp connection, or
initialize user settings.
DSP PARAM, VIDEO, ALL, CANCEL*
Initializes various settings stored in this unit. You can
select an initialization method from the following.
57 En
Advanced setup
3
Enter the desired remote control ID code.
To switch to ID1:
Press lNumeric keys to enter “5019”.
To switch to ID2:
Press lNumeric keys to enter “5020”.
Once the remote control code is registered,
nTRANSMIT blinks twice.
If it fails, nTRANSMIT blinks six times. Repeat
from step 1.
y
• If you initialize the settings of this unit, “REMOTE ID” (remote control
code of this unit) is set to “ID1”.
58 En
APPENDIX
Troubleshooting
General
Problem
Disconnect the power cable from the AC wall outlet,
wait about 30 seconds and then plug it in again.
—
This unit suddenly
enters the standby
mode
The internal temperature is too high and
the overheat protection circuitry has been
activated.
Wait about 1 hour for this unit to cool down and then
turn it back on.
—
The protection circuitry has been activated
because of a short circuit, etc.
Check that the speaker impedance setting is correct.
57
Check that the speaker wires are not touching each
other and then turn this unit back on.
—
The sleep timer has turned off this unit.
Turn on this unit and play the source again.
—
The power cable is not connected or the
plug is not completely inserted.
Connect the power cable properly to an AC wall
outlet.
19
The speaker impedance setting is
incorrect.
Set the speaker impedance to match your speakers.
57
(When this unit is turned back on and
“CHECK SP WIRES!” is displayed.) The
protection circuitry has been activated
because this unit was turned on while a
speaker cable was shorted.
Make sure that all speaker cables between this unit
and speakers are connected properly.
11
This unit cannot be
turned off.
The internal microcomputer is frozen due
to an external electric shock (such as
lightning or excessive static electricity) or
by a drop in power supply voltage.
Disconnect the power cable from the AC wall outlet,
wait about 30 seconds and then plug it in again.
—
No picture.
An appropriate video input is not selected
on the video monitor.
Select an appropriate video input on the video
monitor.
—
The external video component is
connected to one of the HDMI 1-4 jacks
while your video monitor is connected to
the MONITOR OUT (COMPONENT
VIDEO or VIDEO) jacks.
Connect the external video component to the video
input jacks other than the HDMI 1-4 jacks or connect
the video monitor to the HDMI OUT jack.
This unit outputs the video signals not
supported by the video monitor connected
to the HDMI OUT jack.
Displays the advanced setup menu and select
“VIDEO” in “INIT” to reset the video parameters.
57
Displays the advanced setup menu and set
“MON.CHK” to “YES”.
57
Video signals are input from a game
console while your video monitor is
connected to the HDMI OUT jack.
Connect the video monitor to the MONITOR OUT
(COMPONENT VIDEO) jacks.
14
Non-standard video signals are input.
Connect the video monitor to the MONITOR OUT
(COMPONENT VIDEO or VIDEO) jacks.
14
This unit fails to turn
on or enters the
standby mode soon
after the power is
turned on.
APPENDIX
The internal microcomputer is frozen due
to an external electric shock (such as
lightning or excessive static electricity) or
by a drop in power supply voltage.
ADVANCED
OPERATION
This unit does not
operate properly.
BASIC
OPERATION
Remedy
PREPARATION
See
page
Cause
INTRODUCTION
Refer to the table below when this unit does not function properly. If the problem you are experiencing is not listed below
or if the instruction below does not help, turn off this unit, disconnect the power cable, and contact the nearest authorized
Yamaha dealer or service center.
14, 15
English
59 En
Troubleshooting
Problem
Cause
Remedy
See
page
The picture is
disturbed.
The video software is copy-protected.
No sound.
Incorrect input or output cable
connections.
Connect the cables properly. If the problem persists,
the cables may be defective.
15
No appropriate input source has been
selected.
Rotate the RINPUT selector (or press dInput
selection key) to select the desired input source.
23
Speaker connections are not secure.
Secure the connections.
11
The volume is turned down or muted.
Turn up the volume.
23
Signals this unit cannot reproduce are
being input from a source component,
such as a CD-ROM.
Display “Signal Info” in the Option menu and check
the input signal format.
If “No Signal” is displayed, check if the playback
component is properly connected to this unit (or a
proper input source is selected).
If “___” is displayed, the input signal in that format
cannot be reproduced by this unit.
—
The HDMI components connected to this
unit do not support the HDCP copy
protection standards.
Connect HDMI components that support the HDCP
copy protection standards.
71
“Audio Output” in “HDMI” is set to
“TV”.
Set “Audio Output” (Function Setup → HDMI →
Audio Output) to the other setting.
50
A proper audio decoder is not selected.
Display the Option menu and set “Decoder Mode” to
“Auto”.
39
When a monaural source sound field
program is applied, sound of all channels
are output from the center speaker for
some surround decoders.
Try another sound field program.
26
The playback component or speakers are
not connected properly.
Connect the cables properly. If the problem persists,
the cables may be defective.
12, 15
Output from that speaker is disabled.
Check the Speaker indicators on the front panel
display. If the corresponding indicator is turned off,
try the following.
1) Change the input source to another one.
2) With the selected sound field program, sound is not
output from that speaker. Select another sound field
program.
3) “None” may have been selected for that speaker on
this unit. Display “Speaker Setup” in the “Setup”
menu and enables output of that speaker.
6, 23, 26,
47
The volume of that speaker is set to
minimum in “Speaker Setup” in the
“Setup” menu.
Display “Speaker Setup” in the “Setup” menu and
adjust the volume (Manual Setup → Speaker Level).
49
This unit is in the straight decode mode.
Press OSTRAIGHT (or gSTRAIGHT) to turn
off the straight decode mode.
29
Sound may not be output from certain
channels depending on input sources or
sound field programs.
Try another sound field program.
26
The speaker is malfunction.
Check the speaker indicators on the front panel
display. If the corresponding indicator lights up,
connect another speaker and check if sound is output.
If sound is not output, this unit may be malfunction.
—
Only the center
speaker outputs
substantial sound.
No sound is output
from a specific
speaker.
60 En
Troubleshooting
Problem
Remedy
See
page
“LFE / Bass Out” is set to “Front” and a
Dolby Digital, DTS or AAC signals is
being played.
Set “LFE / Bass Out” to “Subwoofer” or “Both”.
48
“LFE / Bass Out” is set to “Subwoofer” or
“Front” and a 2-channel source is being
played.
Set “LFE / Bass Out” to “Both”.
48
The source does not contain low
frequency signals.
Set “Extended Surround” other than “Off” or “Auto”.
40
The audio input
sources cannot be
played in the desired
digital audio signal
format.
The connected component is not set to
output the desired digital audio signals.
Set the playback component properly referring to its
operating instructions.
—
Noise/hum noise is
heard.
Incorrect cable connection.
Connect the audio cables properly. If the problem
persists, the cables may be defective.
—
A DTS-CD is being played back.
1) When only noise is output
If a DTS bitstream signal is not properly input to this
unit, only noise is output. Connect the playback
component to this unit by digital connection and play
back the DTS-CD. If the condition is not improved,
the problem may results from the playback
component. Consult the manufacturer of the playback
component.
2) When noise is output during playback or skip
operation
Before playing back the DTS-CD, display the Option
menu after selecting the input source and set
“Decoder Mode” to “DTS”.
The volume level
cannot be increased,
or the sound is
distorted.
The component connected to the AUDIO
1/2 jacks of this unit is turned off.
Turn on the power of the component.
55
“Memory Guard!” is
displayed and the
setting cannot be
changed.
“Memory Guard” in “Set Menu” is set to
“On”.
Set “Memory Guard” to “Off”.
52
There is noise
interference from
digital or radio
frequency equipment.
This unit is too close to other digital or
radio frequency equipment.
Move this unit further away from such equipment.
—
15, 40
BASIC
OPERATION
“Extended Surround” in the Option menu
is set to “Off”, or an input signal does not
contain a surround back flag with
“Extended Surround” set to “Auto”.
PREPARATION
No sound is heard
from the surround
back speakers.
INTRODUCTION
No sound is heard
from the subwoofer.
Cause
ADVANCED
OPERATION
APPENDIX
English
61 En
Troubleshooting
HDMI™
Problem
No picture or sound.
Cause
Remedy
See
page
The number of the connected HDMI
components is over the limit.
Disconnect some of the HDMI components.
—
The connected HDMI component does not
support high-bandwidth digital copyright
protection (HDCP).
Connect an HDMI component that supports HDCP.
71
Tuner (FM/AM)
Problem
FM stereo reception is
noisy.
FM
You are too far from the station
transmitter or the input from the
antenna is weak.
Remedy
See
page
Check the antenna connections.
18
Replace the outdoor antenna with a more
sensitive multi-element antenna.
—
Switch to monaural mode.
40
There is distortion, and
clear reception cannot
be obtained even with a
good FM antenna.
There is multi-path interference.
Adjust the antenna height or orientation, or
place it in a different location.
—
The desired station
cannot be tuned into
with the automatic
tuning method.
You are in an area far from a station or
an input from the antenna is weak.
Replace an outdoor antenna with more
sensitive multi element antenna.
—
Tune in manually or by direct frequency
tuning.
30
The desired station
cannot be tuned into
with the automatic
tuning method.
The signal is weak or the antenna
connections are loose.
Adjust the AM loop antenna orientation.
18
Use the manual tuning method.
30
There are continuous
crackling and hissing
noises.
Supplied AM loop antenna is not
connected.
Connect the AM loop antenna correctly even
if you use an outdoor antenna.
18
The noises may be caused by lightning,
fluorescent lamps, motors, thermostats
and other electrical equipment.
It is difficult to completely eliminate noise,
but it can be reduced by installing and
properly grounding an outdoor AM antenna.
18
There are buzzing and
whining noises.
A TV set is being used nearby.
Move this unit away from the TV set.
—
AM stations cannot be
preset by automatic
station preset.
Only FM Radio Data System
broadcasting stations are stored
automatically by automatic station
preset.
Register AM stations by manual station
preset.
31
AM
62 En
Cause
Troubleshooting
Remote control
The remote control
does not work or
function properly.
Cause
Remedy
See
page
Direct sunlight or lighting (from an
inverter type of fluorescent lamp, strobe
light, etc.) is striking the remote control
sensor of this unit.
Adjust the lighting angle or reposition this unit.
—
The batteries are weak.
Replace all batteries.
9
The remote control ID of the remote
control and this unit do not match.
Match the remote control ID of this unit and the
remote control.
57
The remote control code is not correctly
set.
Set the remote control code correctly using “List of
remote control codes” at the end of this manual.
55
Try setting another code of the same manufacturer
using “List of remote control codes” at the end of this
manual.
55
If this unit does not work when you press jCursor,
do the following.
When the key does not work during DVD disc menu
operation: press the dInput selection keys on
the remote control again.
When the key does not work during Option menu or
Setup menu operation: press the key applicable for
the current menu operation again.
—
The batteries of remote control of this unit
(or the external component) are weak.
Replace the batteries
9
The distance between the two remote
controls is too long or too short.
Place the remote controls at a proper distance.
56
The signal coding or modulation of the
other remote control is not compatible
with this remote control.
Learning is not possible.
—
Memory capacity is full.
Delete unnecessary functions to free some memory
space for the new functions.
56
ADVANCED
OPERATION
9
Even if the remote control code is
correctly set, there are some models that
do not respond to the remote control.
APPENDIX
The remote control
does not learn new
functions.
BASIC
OPERATION
The remote control will function within a maximum
range of 6 m (20 ft) and no more than 30 degrees
offaxis from the front panel.
PREPARATION
Wrong distance or angle.
INTRODUCTION
Problem
iPod™
Note
• In case of a transmission error without a status message appearing on the front panel display and GUI screen, check the connection of your iPod
(page 17).
Status message
Remedy
See
page
This unit is in the middle of recognizing
the connection with your iPod.
English
Loading...
Cause
This unit is in the middle of acquiring
song lists from your iPod.
63 En
Troubleshooting
Status message
Connect error
Cause
There is a problem with the signal path
from your iPod to this unit.
Unknown iPod
The iPod being used is not supported by
this unit.
iPod Connected
Your iPod is properly placed in the
Yamaha iPod universal dock.
Disconnected
Your iPod is removed from the Yamaha
iPod universal dock.
Unable to play
This unit cannot play back the songs
currently stored on your iPod.
Remedy
See
page
Turn off this unit and reconnect the Yamaha iPod
universal dock to the DOCK terminal of this unit.
17
Remove your iPod in the Yamaha iPod universal dock
and then place it back in the dock.
34
Use an iPod supported by this unit.
—
34
Check that the songs currently stored on your iPod
are playable.
—
Bluetooth™
Status message
Searching...
Cause
Remedy
See
page
The Bluetooth wireless audio receiver and
the Bluetooth component are in the
middle of the pairing.
The Bluetooth wireless audio receiver and
the Bluetooth component are in the
middle of establishing the connection.
Completed
The pairing is completed.
Canceled
The pairing is canceled.
BT Connected
The connection between the Yamaha
Bluetooth wireless audio receiver and the
Bluetooth component is established.
Disconnected
The Bluetooth component is disconnected
from the Yamaha Bluetooth wireless
audio receiver.
Not Found
No Bluetooth components are found
during a pairing process.
Pairing must be performed on the both this unit and
your Bluetooth component at the same time. Check
whether your Bluetooth component is set to the
paring mode and then try again.
36
No Bluetooth components are found
during a Bluetooth connection.
Check whether your Bluetooth component is turned
on and then try again.
36
Locate your Bluetooth component within 10 meters
(33 feet) of this unit and then try again.
36
64 En
Troubleshooting
USB
The music files and
folder cannot be
browsed.
Remedy
See
page
The music files and folders are stored the
locations other than the FAT area.
Place the music files and folders in the FAT area.
—
You are attempting to browse directory
hierarchies of over 8 levels or a directory
with more than 500 files.
Modify the data structure on your USB storage
device.
—
This unit cannot recognize some
characters used in the file name or folder
name.
Edit the file name or folder name using a PC and then
try again.
—
The USB storage device is not compatible
with mass storage class (except USB
HDDs).
Use a USB storage device that is compatible with
mass storage class (except USB HDDs).
—
This unit does not recognize the USB
storage device properly.
Turn this unit off and then turn on again.
19
Cause
Remedy
See
page
Your USB storage device is connected.
Disconnected
Your USB storage device has been
disconnected from the USB port of this
unit.
Check the connection between this unit and your
USB storage device.
—
This unit recognizes the USB storage
device as an illegal device.
Turn this unit off and then turn on again.
19
This unit cannot access your USB storage
device.
Try another USB storage device.
—
There is a problem with the signal path
from your USB storage device to this unit.
Turn off this unit and reconnect your USB storage
device to the USB port of this unit.
Access Error
The data is invalid.
18, 19
Try resetting your USB storage device.
—
Try another USB storage device.
—
Auto Setup (YPAO)
APPENDIX
Unable to play
—
ADVANCED
OPERATION
USB Connected
BASIC
OPERATION
Status message
PREPARATION
The USB storage
device cannot be
recognized.
Cause
INTRODUCTION
Problem
Notes
•
•
•
•
If the an error or warning message appears, resolve the problem and then run “Auto Setup” again.
Warning message “W-2” or “W-3” indicates that the adjusted settings may not be optimal.
Depending on the speakers, warning message “W-1” may appears even if the speaker connections are correct.
If error message “E-10” occurs repeatedly, contact a qualified Yamaha service center.
Before Auto Setup
Error message
Cause
Remedy
See
page
Optimizer microphone is not connected.
Connect the supplied optimizer microphone to the
OPTIMIZER MIC jack on the front panel.
20
Unplug HP!
Headphones are connected.
Unplug the headphones.
—
Memory Guard!
The parameters of this unit are protected.
Set “Memory Guard” to “Off”.
52
65 En
English
Connect MIC!
Troubleshooting
During Auto Setup
Error message
Cause
Remedy
See
page
E-1:NO FRONT SP
Front L/R channel signals are not
detected.
Check the front L/R speaker connections.
11
E-2:NO SUR. SP
Only a signal from one of the surround
channels are detected.
Check the surround L/R speaker connections.
11
E-3:NO PRNS SP
Only signals from one of the presence L/
R channels are detected.
Check the presence L/R speaker connections.
11
E-4:SBR->SBL
Only right surround back channel signal
is detected.
If you connect only one surround back speaker,
connect it to the left SUR.BACK (SINGLE) jack.
11
E-5:NOISY
Measurement cannot be performed
accurately due to loud ambient noise.
Try running “Auto Setup” in a quiet environment.
—
Turn off noisy electric equipment like air
conditioners or move them away from the optimizer
microphone.
—
E-6:CHECK SUR.
Surround back speakers are connected,
though surround L/R speakers are not.
When using surround back speakers, you need to
connect surround L/R speakers.
11
E-7:NO MIC
The optimizer microphone was
unplugged during the “Auto Setup”
procedure.
Do not touch the optimizer microphone during “Auto
Setup”.
20
E-8:NO SIGNAL
The optimizer microphone does not
detect test tones.
Check whether the microphone is properly placed.
20
Check whether the speakers are properly placed and
connected.
10, 11
The optimizer microphone or OPTIMIZER MIC
jack may be defective. Contact the nearest Yamaha
dealer or service center.
—
E-9:USER CANCEL
“Auto Setup” was canceled due to an
inappropriate user operation.
Run “Auto Setup” again.
20
E-10:INTERNAL
ERROR
An internal error occurred.
Run “Auto Setup” again.
20
66 En
Troubleshooting
After Auto Setup
Cause
Remedy
See
page
Speaker polarity is not correct. This
message may appear depending on the
speakers even when the speakers are
connected correctly.
Check the polarities (+, –) of the displayed speaker.
If they are correct, the speakers work properly even
when this message is displayed.
12
W-2:OVER 24m (80ft)
The distance between the speaker and the
listening position is over 24 m (80 ft).
Bring the speaker within 24 m (80 ft.) area around
the listening position.
—
W-3:LEVEL ERROR
The difference of volume level among
speakers is excessive.
Recheck the speaker positions and make sure all
speakers are placed in a similar environment.
—
Check the polarities (+, –) of the speakers.
12
We recommended that you use speakers with the
same or similar specifications.
—
Adjust the output volume of the subwoofer.
—
Presence speakers were not detected
during measurement with “Extra Speaker
Assignment” set to “Presence”.
Check the presence speaker connections and perform
measurement again. If presence speakers are not
connected, set the “Extra Speaker Assignment” to
other than “Presence”.
11, 48
BASIC
OPERATION
W-4:CHECK PRNS
PREPARATION
W-1:OUT OF PHASE
INTRODUCTION
Error message
ADVANCED
OPERATION
APPENDIX
English
67 En
Glossary
■
Audio and video synchronization (lip sync)
■
Dolby Digital Surround EX
Lip sync, an abbreviation for lip synchronization, is a technical term
that involves both a problem and a capability of maintaining audio and
video signals synchronized during post-production and transmission.
Whereas the audio and video latency requires complex end-user
adjustments, HDMI version 1.3 incorporates an automatic audio and
video syncing capability that allows devices to perform this
synchronization automatically and accurately without user interaction.
Dolby Digital EX creates 6 full-bandwidth output channels from 5.1channel sources.
For the best results, Dolby Digital EX should be used with movie
sound tracks recorded with Dolby Digital Surround EX. With this
additional channel, you can experience more dynamic and realistic
moving sound especially with scenes with “fly-over” and “flyaround” effects.
■
■
Bi-amplification connection
A bi-amplification connection uses two amplifiers for a speaker.
One amplifier is connected to the woofer section of a loudspeaker
while the other is connected to the combined mid and tweeter section.
With this arrangement each amplifier operates over a restricted
frequency range. This restricted range presents each amplifier with a
much simpler job and each amplifier is less likely to influence the
sound in some way.
■
Component video signal
With the component video signal system, the video signal is separated
into the Y signal for the luminance and the PB and PR signals for the
chrominance. Color can be reproduced more faithfully with this
system because each of these signals is independent. The component
signal is also called the “color difference signal” because the
luminance signal is subtracted from the color signal. A monitor with
component input jacks is required in order to output component
signals.
■
Composite video signal
With the composite video signal system, the video signal is composed
of three basic elements of a video picture: color, brightness and
synchronization data. A composite video jack on a video component
transmits these three elements combined.
■
Deep Color
Deep Color refers to the use of various color depths in displays, up
from the 24-bit depths in previous versions of the HDMI specification.
This extra bit depth allows HDTVs and other displays go from
millions of colors to billions of colors and eliminate on-screen color
banding for smooth tonal transitions and subtle gradations between
colors. The increased contrast ratio can represent many times more
shades of gray between black and white. Also Deep Color increases
the number of available colors within the boundaries defined by the
RGB or YCbCr color space.
■
Dolby Digital
Dolby Digital is a digital surround sound system that gives you
completely independent multi-channel audio. With 3 front channels
(front L/R and center), and 2 surround stereo channels, Dolby Digital
provides 5 full-range audio channels. With an additional channel
especially for bass effects, called LFE (Low Frequency Effect), the
system has a total of 5.1-channels (LFE is counted as 0.1 channel). By
using 2-channel stereo for the surround speakers, more accurate
moving sound effects and surround sound environment are possible
than with Dolby Surround. The wide dynamic range from maximum
to minimum volume reproduced by the 5 full-range channels and the
precise sound orientation generated using digital sound processing
provide listeners with unprecedented excitement and realism.
With this unit, any sound environment from monaural up to a 5.1channel configuration can be freely selected for your enjoyment.
68 En
Dolby Digital Plus
Dolby Digital Plus is an advanced audio technology developed for
high-definition programming and media including HD broadcasts,
and Blu-ray Disc. Selected as an optional audio standard for Blu-ray
Disc, this technology delivers multichannel sound with discrete
channel output. Supporting bitrates up to 6.0 Mbps, Dolby Digital
Plus can carry up to 7.1 discreet audio channels simultaneously.
Supported by HDMI version 1.3 and designed for the optical disc
players and AV receivers/amplifiers of the future, Dolby Digital Plus
also remains fully compatible with the existing multichannel audio
systems that incorporate Dolby Digital.
■
Dolby Pro Logic II
Dolby Pro Logic II is an improved technique used to decode vast
numbers of existing Dolby Surround sources. This new technology
enables a discrete 5-channel playback with 2 front left and right
channels, 1 center channel, and 2 surround left and right channels
instead of only 1 surround channel for conventional Pro Logic
technology. There are three modes available: “Music mode” for music
sources, “Movie mode” for movie sources and “Game mode” for
game sources.
■
Dolby Pro Logic IIx
Dolby Pro Logic IIx is a new technology enabling discrete
multichannel playback from 2-channel or multi-channel sources.
There are three modes available: “Music mode” for music sources,
“Movie mode” for movie sources (for 2-channel sources only) and
“Game mode” for game sources.
■
Dolby Surround
Dolby Surround is widely used with nearly all video tapes and laser
discs, and in many TV and cable broadcasts as well. Dolby Surround
uses a 4-channel analog recording system to reproduce realistic and
dynamic sound effects: 2 front left and right channels (stereo), a
center channel for dialog (monaural), and a surround channel for
special sound effects (monaural). The surround channel reproduces
sound within a narrow frequency range. The Dolby Pro Logic decoder
built into this unit employs a digital signal processing system that
automatically stabilizes the volume on each channel to enhance
moving sound effects and directionality.
■
Dolby TrueHD
Dolby TrueHD is an advanced lossless audio technology developed
for high-definition disc-based media including Blu-ray Disc. Selected
as an optional audio standard for Blu-ray Disc, this technology
delivers sound that is bit-for-bit identical to the studio master, offering
a high-definition home theater experience.
Supporting bitrates up to 18.0 Mbps, Dolby TrueHD can carry up to 8
discrete channels of 24-bit/96 kHz audio simultaneously.
Dolby TrueHD also remains fully compatible with the existing
multichannel audio systems and retains the metadata capability of
Dolby Digital, allowing dialog normalization and dynamic range
control.
Glossary
■
DSD
■
DTS 96/24
■
DTS Digital Surround
DTS Express
This is an audio format for next-generation optical discs such as Bluray discs. It uses optimized low bit rate signals for network streaming.
In the case of a Blu-ray disc, this format is used with secondary audio,
enabling you to enjoy the commentary of the movie producer via the
Internet while playing the main program.
DTS-HD High Resolution Audio
DTS-HD High Resolution Audio is a high resolution audio
technology developed for high-definition disc-based media including
Blu-ray Disc. Selected as an optional audio standard for Blu-ray Disc,
this technology delivers sound that is virtually indistinguishable from
the original, offering a high-definition home theater experience.
Supporting bitrates up to 6.0 Mbps for Blu-ray Disc, DTS-HD High
Resolution Audio can carry up to 7.1 discrete channels of 24-bit/96
kHz audio simultaneously.
DTS-HD High Resolution Audio also remains fully compatible with
the existing multichannel audio systems that incorporate DTS Digital
Surround.
■
DTS-HD Master Audio
LFE 0.1 channel
This channel reproduces low-frequency signals. The frequency range
of this channel is from 20 Hz to 120 Hz. This channel is counted as
0.1 because it only enforces a low-frequency range compared to the
full-range reproduced by the other 5/6 channels in Dolby Digital or
DTS 5.1/6.1-channel systems.
■
Neo:6
Neo:6 decodes the conventional 2-channel sources for 6- channel
playback by the specific decoder. It enables playback with the fullrange channels with higher separation just like digital discrete signal
playback. There are two modes available: “Music mode” for music
sources and “Cinema mode” for movie sources.
■
PCM (Linear PCM)
Linear PCM is a signal format under which an analog audio signal is
digitized, recorded and transmitted without using any compression.
This is used as a method of recording CDs and DVD audio. The PCM
system uses a technique for sampling the size of the analog signal per
very small unit of time. Standing for “Pulse Code Modulation”, the
analog signal is encoded as pulses and then modulated for recording.
■
Sampling frequency and number of
quantized bits
When digitizing an analog audio signal, the number of times the
signal is sampled per second is called the sampling frequency, while
the degree of fineness when converting the sound level into a numeric
value is called the number of quantized bits. The range of rates that
can be played back is determined based on the sampling rate, while
the dynamic range representing the sound level difference is
determined by the number of quantized bits. In principle, the higher
the sampling frequency, the wider the range of frequencies that can be
played back, and the higher the number of quantized bits, the more
finely the sound level can be reproduced.
■
“x.v.Color”
A color space standard supported by HDMI version 1.3. It is a more
extensive color space than sRGB, and allows the expression of colors
that could not be expressed before. While remaining compatible with
the color gamut of sRGB standards, “x.v.Color” expands the color
space and can thus produce more vivid, natural images. It is
particularly effective for still pictures and computer graphics.
English
DTS-HD Master Audio is an advanced lossless audio technology
developed for high-definition disc-based media including Blu-ray
Disc. Selected as an optional audio standard for Blu-ray Disc, this
technology delivers sound that is bit-for-bit identical to the studio
master, offering a high-definition home theater experience.
Supporting bitrates up to 24.5 Mbps for Blu-ray Disc, DTS-HD
Master Audio can carry up to 7.1 discrete channels of 24-bit/96 kHz
audio simultaneously. Supported by HDMI version 1.3 and designed
for the optical disc players and AV receivers/amplifiers of the future,
DTS-HD Master Audio also remains fully compatible with the
existing multichannel audio systems that incorporate DTS Digital
Surround.
■
APPENDIX
■
HDMI
HDMI (High-Definition Multimedia Interface) is the first industrysupported, uncompressed, all-digital audio/video interface. Providing
an interface between any source (such as a set-top box or AV receiver)
and an audio/video monitor (such as a digital television), HDMI
supports standard, enhanced or high-definition video as well as multichannel digital audio using a single cable. HDMI transmits all ATSC
HDTV standards and supports 8-channel digital audio, with
bandwidth to spare to accommodate future enhancements and
requirements.
When used in combination with HDCP (High-bandwidth Digital
Content Protection), HDMI provides a secure audio/video interface
that meets the security requirements of content providers and system
operators. For further information on HDMI, visit the HDMI website
at “http://www.hdmi.org/”.
ADVANCED
OPERATION
■
■
BASIC
OPERATION
DTS digital surround was developed to replace the analog soundtracks
of movies with a 5.1-channel digital sound track, and is now rapidly
gaining popularity in movie theaters around the world. DTS, Inc. has
developed a home theater system so that you can enjoy the depth of
sound and natural spatial representation of DTS digital surround in
your home. This system produces practically distortion-free 6-channel
sound (technically, front left and right, center, surround left and right,
and LFE 0.1 (subwoofer) channels for a total of 5.1 channels). This
unit incorporates a DTS-ES decoder that enables 6.1-channel
reproduction by adding the surround back channel to the existing 5.1channel format.
FLAC
This is a file format for lossless audio data compression. FLAC is
inferior to lossy compression formats in compression rate but provides
higher audio quality.
PREPARATION
DTS 96/24 offers an unprecedented level of audio quality for multichannel sound on DVD video, and is fully backward-compatible with
all DTS decoders. “96” refers to a 96 kHz sampling rate compared to
the typical 48 kHz sampling rate. “24” refers to 24-bit word length.
DTS 96/24 offers sound quality transparent to the original 96/24
master, and 96/24 5.1-channel sound with full-quality full-motion
video for music programs and motion picture soundtracks on DVD
video.
■
INTRODUCTION
Direct Stream Digital (DSD) technology stores audio signals on
digital storage media, such as Super Audio CDs. Using DSD, signals
are stored as single bit values at a high-frequency sampling rate of
2.8224 MHz, while noise shaping and oversampling are used to
reduce distortion, a common occurrence with very high quantization
of audio signals. Due to the high sampling rate, better audio quality
can be achieved than that offered by the PCM format used for normal
audio CDs. The frequency is equal to or higher than 100 kHz and the
dynamic range is 120 dB. This unit can transmit or receive DSD
signals input from the HDMI jack.
69 En
Sound field program information
■ Elements of a sound field
What really creates the rich, full tones of a live instrument
are the multiple reflections from the walls of the room. In
addition to making the sound live, these reflections enable
us to tell where the player is situated as well as the size
and shape of the room in which we are sitting. There are
two distinct types of sound reflections that combine to
make up the sound field in addition to the direct sound
coming straight to our ears from the playerfs instrument.
Early reflections
Reflected sounds reach our ears extremely rapidly (50 ms
to 100 ms after the direct sound), after reflecting from one
surface only (for example, from a wall or the ceiling).
Early reflections actually add clarity to the direct sound.
Reverberations
These are caused by reflections from more than one
surface (for example, from the walls, and/or the ceiling) so
numerous that they merge together to form a continuous
sonic afterglow. They are nondirectional and lessen the
clarity of the direct sound.
Direct sound, early reflections and subsequent
reverberations taken together help us to determine the
subjective size and shape of the room, and it is this
information that the digital sound field processor
reproduces in order to create sound fields.
If you could create the appropriate early reflections and
subsequent reverberations in your listening room, you
would be able to create your own listening
environment.
The acoustics in your room could be changed to those
of a concert hall, a dance floor, or a room with virtually
any size at all. This ability to create sound fields at will
is exactly what Yamaha has done with the digital sound
field processor.
■
CINEMA DSP
Since the Dolby Surround and DTS systems were originally designed
for use in movie theaters, their effect is best felt in a theater having
many speakers designed for acoustic effects. Since home conditions,
such as room size, wall material, number of speakers, and so on, can
differ so widely, it is inevitable that there are differences in the sound
heard.
Based on a wealth of actually measured data, Yamaha CINEMA DSP
provides the audiovisual experience of a movie theater in the listening
room of your own home by using the Yamaha original sound field
technology combined with various digital audio systems.
■ CINEMA DSP 3D
The actually measured sound field data contain the
information of the height of the sound images. CINEMA
DSP 3D feature achieves the reproduction of the accurate
height of the sound images so that it creates the accurate
and intensive stereoscopic sound fields in a listening
room.
70 En
■
SILENT CINEMA
Yamaha has developed a natural, realistic sound effect DSP algorithm
for headphones. Parameters for headphones have been set for each
sound field so that accurate representations of all the sound field
programs can be enjoyed on headphones.
■
Virtual CINEMA DSP
Yamaha has developed a Virtual CINEMA DSP algorithm that allows
you to enjoy DSP sound field surround effects even without any
surround speakers by using virtual surround speakers. It is even
possible to enjoy Virtual CINEMA DSP using a minimal two-speaker
system that does not include a center speaker.
■
Compressed Music Enhancer
The Compressed Music Enhancer feature of this unit enhances your
listening experience by regenerating the missing harmonics in a
compression artifact. As a result, flattened complexity due to the loss
of high-frequency fidelity as well as lack of bass due to the loss of
low-frequency bass is compensated, providing improved performance
of the overall sound system.
Information on HDMI™
■
HDMI signal compatibility
Audio signals
Audio signal formats
INTRODUCTION
Audio signal types
Compatible media
2ch, 32 to 192 kHz, 16/20/24 bit
CD, DVD-Video, DVD-Audio, etc.
Multi-ch Linear PCM
8ch, 32 to 192 kHz, 16/20/24 bit
DVD-Audio, Blu-ray Disc, HD DVD, etc.
DSD
2/5.1ch, 2.8224 MHz, 1 bit
SA-CD, etc.
Bitstream
Dolby Digital, DTS
DVD-Video, etc.
Bitstream (High definition audio)
Dolby TrueHD, Dolby Digital Plus, DTS-HD
Master Audio, DTS-HD High Resolution Audio,
DTS Express
Blu-ray Disc, HD DVD, etc.
y
• If the input source component can decode the bitstream audio signals of audio commentaries, you can play back the audio sources with the audio
commentaries mixed down by using the following connections:
– multi-channel analog audio input (page 16)
– digital input (OPTICAL or COAXIAL)
• Refer to the supplied instruction manuals of the input source component, and set the component appropriately.
ADVANCED
OPERATION
Video signals
This unit is compatible with the video signals of the following resolutions:
• 480i/60 Hz
• 576i/50 Hz
• 480p/60 Hz
• 576p/50 Hz
• 720p/60 Hz, 50 Hz
• 1080i/60 Hz, 50 Hz
• 1080p/60 Hz, 50 Hz, 24 Hz
BASIC
OPERATION
Notes
• When CPPM copy-protected DVD-Audio is played back, video and audio signals may not be output depending on the type of the DVD player.
• This unit is not compatible with HDCP-incompatible HDMI or DVI components.
• To decode audio bitstream signals on this unit, set the input source component appropriately so that the component outputs the bitstream audio signals
directly (does not decode the bitstream signals on the component). Refer to the supplied instruction manuals for details.
• This unit is not compatible with the audio commentary features (for example, the special audio contents downloaded via Internet) of Blu-ray Disc or HD
DVD. This unit does not play back the audio commentaries of the Blu-ray Disc or HD DVD contents.
PREPARATION
2ch Linear PCM
APPENDIX
English
71 En
Specifications
AUDIO SECTION
VIDEO SECTION
• Minimum RMS Output Power for Front, Center, Surround,
Surround back
20 Hz to 20 kHz, 0.08% THD, 8 Ω...................................... 105 W
• Dynamic Power (IHF)
Front Speakers 8/6/4/2 Ω ................................ 140/175/205/250 W
• Maximum Useful Output Power (JEITA)
[General, China, Korea and Asia models]
1 kHz, 10% THD, 8 Ω ......................................................... 145 W
• Maximum Output Power [Europe, Russia and Asia models]
1 kHz, 0.7% THD, 4 Ω ........................................................ 155 W
• Dynamic Headroom [U.S.A. and Canada models]
8 Ω.......................................................................................1.25 dB
• IEC Output Power [Europe, Russia and Asia models]
Front Speakers 1 kHz, 0.08% THD, 8 Ω ............................. 115 W
• Input Sensitivity/Input Impedance
PHONO .................................................................... 3.5 mV/47 kΩ
AV5, etc................................................................... 200 mV/47 kΩ
MULTI CH INPUT ................................................. 200 mV/47 kΩ
• Maximum Input Voltage
PHONO (1 kHz, 0.1% THD) ..................................60 mV or more
AV5, etc. (1 kHz, 0.5% THD) ...................................2.0 V or more
• Rated Output Voltage/Output Impedance
AUDIO OUT.......................................................... 200 mV/1.2 kΩ
PRE OUT ................................................................... 1.0 V/1.2 kΩ
SUBWOOFER (2ch Stereo, Front Speaker: Small)
................................................................................. 1.0 V/1.2 kΩ
ZONE2 OUT.......................................................... 200 mV/1.2 kΩ
• Headphone Jack Rated Output/Impedance
AV5, etc. (1 kHz, 50 mV, 8 Ω) ................................ 100 mV/470 Ω
• Frequency Response
AV5 to FRONT ..................................10 Hz to 100 kHz, +0/–3 dB
• RIAA Equalization Deviation
PHONO .......................................................................... 0 ± 0.5 dB
• Total Harmonic Distortion
PHONO to AUDIO OUT
(20 Hz to 20 kHz, 1 V)............................................0.02% or less
AV5, etc. to FRONT, Pure Direct
(20 Hz to 20 kHz, 50 W, 8 Ω) .................................0.06% or less
• Signal to Noise Ratio (IHF-A Network)
PHONO Input Shorted (5.0 mV to AUDIO OUT)
[U.S.A., Canada, General and China models].......... 86 dB or more
[Other models] ......................................................... 81 dB or more
AV5, etc. Input Shorted (250 mV to Front Speakers)
............................................................................. 100 dB or more
• Residual Noise (IHF-A Network)
Front Speakers.......................................................... 150 µV or less
• Channel Separation (1 kHz/10 kHz)
PHONO (Input Shorted) ............................... 60 dB/55 dB or more
AV5, etc. (5.1 kΩ shortened)......................... 60 dB/45 dB or more
• Volume Control ...................................... Mute / –80 dB to +16.5 dB
• Tone Control (Front Speakers)
Bass Boost/Cut ......................................................±10 dB at 50 Hz
Bass Turnover Frequency.....................................................350 Hz
Treble Boost/Cut .................................................±10 dB at 20 kHz
Treble Turnover Frequency .................................................3.5 kHz
• Filter Characteristics (fc=40/60/80/90/100/110/120/160/200 Hz)
H.P.F. (Front, Center, Surround, Surround back: Small)
......................................................................................12 dB/oct.
L.P.F. (Subwoofer) ..........................................................24 dB/oct.
• Video Signal Type (Gray Back)
[U.S.A., Canada, General and Korea models].......................NTSC
[Other models]..........................................................................PAL
• Video Signal Type (Video Conversion) ........................... NTSC/PAL
• Signal Level
Composite................................................................... 1 Vp-p/75 Ω
S-video [U.K., Europe and Russia models]
....................................... 1 Vp-p/75 Ω (Y), 0.286 Vp-p/75 Ω (C)
Component.................... 1 Vp-p/75 Ω (Y), 0.7 Vp-p/75 Ω (Cb, Cr)
• Maximum Input Level (Video Conversion: Off)
............................................................................. 1.5 Vp-p or more
• Signal to Noise Ratio...................................................50 dB or more
• Frequency Response [MONITOR OUT]
Component (Video Conversion: Off)
................................................................ 5 Hz to 60 MHz, –3 dB
72 En
FM SECTION
• Tuning Range
[U.S.A. and Canada models] ............................ 87.5 to 107.9 MHz
[General and Asia models] ......... 87.5/87.50 to 108.0/108.00 MHz
[Other models].............................................. 87.50 to 108.00 MHz
• 50 dB Quieting Sensitivity (IHF)
Mono................................................................... 3.0 µV (20.8 dBf)
• Signal to Noise Ratio (IHF)
Mono/Stereo ............................................................... 74 dB/70 dB
• Harmonic Distortion (1 kHz)
Mono/Stereo ..................................................................... 0.3/0.3%
• Antenna Input (unbalanced) .......................................................75 Ω
AM SECTION
• Tuning Range
[U.S.A. and Canada models] ................................ 530 to 1710 kHz
[General and Asia models] ...................530/531 to 1710/1611 kHz
[Other models]...................................................... 531 to 1611 kHz
GENERAL
• Power Supply
[U.S.A. and Canada models] ............................... AC 120 V, 60 Hz
[General model].................AC 110/120/220/230–240 V, 50/60 Hz
[China model] ...................................................... AC 220 V, 50 Hz
[Korea model]...................................................... AC 220 V, 60 Hz
[Australia model]................................................. AC 240 V, 50 Hz
[U.K., Europe and Russia models] ...................... AC 230 V, 50 Hz
[Asia model] .................................... AC 220/230–240 V, 50/60 Hz
• Power Consumption
[U.S.A. and Canada models] ...................................400 W/500 VA
[Other models]...................................................................... 400 W
• Standby Power Consumption
(HDMI Control: Off, Standby Through: Off).............0.2 W or less
(HDMI Control: On, Standby Through: On)
No Repeat ................................................................1.2 W or less
Repeat .........................................................................3 W or less
• Maximum Power Consumption
[General and Asia models] ................................................... 590 W
• Dimensions (W x H x D)...................................435 x 171 x 365 mm
(17-1/8 x 6-3/4 x 14-3/8 in)
• Weight.................................................................... 11.1 kg (24.5 lbs)
* Specifications are subject to change without notice.
Index
■
Numerics
■
A
C
■
LFE / Bass Out, Manual Setup,
Speaker Setup ........................................... 48
Lipsync, Sound Setup .................................... 50
Liveness, sound field parameter .................... 43
E
Editing sound field program .......................... 42
Editing surround decoder ............................... 42
Effect Level, sound field parameter ............... 45
ENTER, remote control ................................... 7
EON data service,
Radio Data System tuning ........................ 33
EON, Option menu ........................................ 40
EQ Type Select, Manual Setup,
Speaker Setup ........................................... 49
Equalizer, Manual Setup, Speaker Setup ....... 49
Extended Surround, Option menu ................. 40
External amplifier connection ........................ 17
External component operation key ,
remote control ............................................. 7
External decoder connection .......................... 16
Extra Speaker Assignment, Manual Setup,
Speaker Setup ........................................... 48
■
F
FIRM UPDATE, advanced setup .................. 57
Firmware update ............................................ 57
FM antenna connection .................................. 18
FM Mode, Option menu ................................ 40
FM tuning ...................................................... 30
FM/AM, front panel ......................................... 4
Frequency tuning ........................................... 30
Front left speaker ........................................... 10
Front panel ....................................................... 4
Front panel display .......................................... 6
Front Panel Display Scroll,
Display, Function Setup ............................ 51
Front panel display, front panel ....................... 4
Front right speaker ......................................... 10
Front Speaker, Manual Setup,
Speaker Setup ........................................... 48
Function Setup, Setup menu .......................... 50
■
G
GEQ, Manual Setup, Speaker Setup .............. 49
GUI Position, Display, Function Setup ......... 51
I
INFO, front panel ............................................ 4
INFO, remote control ...................................... 7
INIT, advanced setup .................................... 57
Initial Delay, sound field parameter .............. 43
Initial Volume, Volume, Function Setup ...... 51
Input Rename, Function Setup ...................... 52
Input selection key, remote control ................. 7
INPUT selector, front panel ............................ 4
Input signal information display ................... 25
Input source registration, SCENE function ... 24
Installing batteries, remote control .................. 9
iPod playback ................................................ 34
iPod universal dock connection ..................... 17
iPod, troubleshooting .................................... 63
■
■
L
M
MAIN ZONE ON/OFF, front panel ................ 4
MAIN/ZONE2, remote control ....................... 7
Manual Delay, Lipsync, Sound Setup ........... 50
Manual Setup, Speaker Setup ........................ 47
Max Volume, Volume, Function Setup ........ 51
Memory Guard, Setup menu ......................... 52
MEMORY, front panel ................................... 4
MON.CHK, advanced setup .......................... 57
MONITOR OUT jack, rear panel ................... 5
Mono Movie, sound field program ............... 27
Movie, sound field program .......................... 26
MULTI CH INPUT jack, rear panel ............... 5
Multi information display,
front panel display ...................................... 6
Multi-format player connection .................... 16
Multi-zone configuration ............................... 53
Music Video, sound field program ................ 27
MUTE indicator, front panel display .............. 6
MUTE, remote control .................................... 7
■
N
Neo:6 Cinema, decoder ................................. 28
Neo:6 Music, decoder ................................... 28
Numeric key, remote control ........................... 7
■
O
ON SCREEN, remote control ......................... 7
OPTICAL jack .............................................. 13
OPTIMIZER MIC jack, front panel ................ 4
Option menu .................................................. 39
OPTION, remote control ................................. 7
■
P
P. Initial Delay, sound field parameter .......... 43
73 En
English
Cellar Club, sound field program ...................27
Center Image, decoder parameter ..................45
Center Level, sound field parameter ..............44
Center speaker ................................................10
Center Speaker, Manual Setup,
Speaker Setup ............................................48
Center Width, decoder parameter ..................45
Chamber, sound field program .......................27
Changing information on the front panel
display .......................................................25
CINEMA DSP 3D ..........................................29
CINEMA DSP 3D indicator,
front panel display .......................................6
CINEMA DSP indicator,
front panel display .......................................6
Clear Preset, Option menu .............................40
COAXIAL jack ..............................................13
CODE SET, remote control .............................7
COMPONENT VIDEO jack ..........................13
Connect, Option menu ...................................41
Connecting audio and video player ................15
Connecting audio player ................................16
Connecting Bluetooth wireless audio
receiver ......................................................17
Connecting external amplifier ........................17
Connecting external decoder ..........................16
Connecting FM antenna .................................18
■
APPENDIX
■
Decode Type, sound field parameter ............. 44
Decoder Mode, Option menu ........................ 40
Decoder parameter ......................................... 45
Dialogue Lift, sound field parameter ............. 42
Dimension, decoder parameter ...................... 45
Dimer, Display, Function Setup .................... 51
Direct, sound field parameter ........................ 44
Disconnect, Option menu .............................. 41
DISPLAY, remote control ............................... 7
Displaying input signal information .............. 25
Displaying Radio Data System
Information ............................................... 32
DOCK terminal, rear panel .............................. 5
Drama, sound field program .......................... 27
DSP Level, sound field parameter ................. 42
DSP Parameter, Setup menu .......................... 52
Dynamic Range, Sound Setup ....................... 49
ADVANCED
OPERATION
B
Basic operation, Setup menu ..........................47
Bass Crossover Frequency, Manual Setup,
Speaker Setup ............................................49
BI AMP, advanced setup ................................57
Bi-amplification connection ...........................12
Bluetooth component playback ......................36
Bluetooth wireless audio receiver
connection .................................................17
Bluetooth, troubleshooting .............................64
D
H
Hall in Munich, sound field program ............ 27
Hall in Vienna, sound field program ............. 27
HDMI Auto Lipsync, Lipsync,
Sound Setup .............................................. 50
HDMI control ................................................ 38
HDMI Control, HDMI, Function Setup ........ 50
HDMI indicator, front panel display ............... 6
HDMI information ........................................ 71
HDMI jack ..................................................... 13
HDMI OUT/HDMI IN 1-4 jack, rear panel .... 5
HDMI THROUGH, front panel ...................... 4
HDMI, Function Setup .................................. 50
HDMI, troubleshooting ................................. 62
Headphones, use ............................................ 25
Hi-fi sound playback ..................................... 24
High frequency sound adjustment ................. 24
BASIC
OPERATION
■
■
■
PREPARATION
Action Game, sound field program ................27
Adaptive DRC, Volume, Function Setup .......51
Adjusting high frequency sound ....................24
Adjusting low frequency sound .....................24
Advanced setup ..............................................57
Adventure, sound field program ....................26
AM antenna connection .................................18
AM tuning ......................................................30
Analog audio jack ..........................................13
ANTENNA terminal, rear panel ......................5
Aspect, HDMI, Function Setup ......................51
AUDIO 1/2 jack, rear panel .............................5
Audio and video player connection ................15
Audio jack ......................................................13
AUDIO L/R (VIDEO AUX) jack,
front panel ...................................................4
AUDIO OUT jack, rear panel ..........................5
Audio Output, HDMI, Function Setup ...........50
Audio player connection ................................16
Auto Delay, Lipsync, Sound Setup ................50
Auto Preset, Option menu ..............................40
Auto Setup (YPAO), troubleshooting ............65
Auto Setup, Speaker Setup .............................47
Automatic setup .............................................20
AV 1-6 jack, rear panel ....................................5
AV OUT jack, rear panel .................................5
Connecting iPod universal dock .................... 17
Connecting multi-format player .................... 16
Connecting power cable ................................ 19
Connecting projector ..................................... 14
Connecting set-top box .................................. 15
Connecting speaker ........................................ 11
Connecting speaker cable .............................. 12
Connecting TV monitor ................................. 14
Connecting USB storage device .................... 18
Connecting Zone2 .......................................... 53
Connections ................................................... 10
Controlling other component,
remote control ........................................... 55
Controlling Zone2 .......................................... 54
Cursor indicator, front panel display ............... 6
Cursors k / n / l / h, remote control ........... 7
INTRODUCTION
2ch Stereo, sound field program ....................27
3D DSP, sound field parameter ......................42
5.1-channel speaker layout .............................10
6.1-channel speaker layout .............................10
7.1-channel speaker layout .............................10
7ch Enhancer, sound field program ...............28
7ch Stereo, sound field program ....................28
Index
P. Room Size, sound field parameter ............ 43
Pairing Bluetooth components ...................... 36
Pairing, Option menu ..................................... 41
Panorama, decoder parameter ........................ 45
PHONES jack, front panel ............................... 4
PHONO jack, rear panel .................................. 5
Placing speaker .............................................. 10
PLII Game, decoder ....................................... 28
PLII Movie, decoder ...................................... 28
PLII Music, decoder ...................................... 28
PLIIx Game, decoder ..................................... 28
PLIIx Movie, decoder .................................... 28
PLIIx Music, decoder .................................... 28
Power cable connection ................................. 19
Power cable, rear panel .................................... 5
POWER, remote control .................................. 7
PRE OUT jack, rear panel ............................... 5
Presence L Level, sound field parameter ....... 44
Presence left speaker ..................................... 11
Presence R Level, sound field parameter ...... 44
Presence right speaker ................................... 11
PRESET l / h, front panel ........................... 4
Preset tuning .................................................. 30
Pro Logic, decoder ......................................... 28
PROGRAM selector, front panel ..................... 4
Projector connection ...................................... 14
PTY Seek mode,
Radio Data System tuning ........................ 32
PTY Seek, Option menu ................................ 40
PURE DIRECT, front panel ............................ 4
■
R
Radio Data System tuning ............................. 32
Rear panel ........................................................ 5
Receiving remote control signal .................... 17
Registering input source, SCENE function ... 24
Registering sound field program,
SCENE function ....................................... 24
Remote control ................................................ 7
Remote control code resetting ....................... 55
Remote control code setting .......................... 55
Remote control ID setting ............................. 57
Remote control signal transmitter,
remote control ............................................. 7
Remote control,
controlling other component ..................... 55
Remote control, preparation ............................ 9
Remote control, troubleshooting ................... 63
Remote control, use ......................................... 9
REMOTE ID, advanced setup ....................... 57
REMOTE IN/OUT jack, rear panel ................. 5
Repeat playback, iPod ................................... 35
Repeat playback, USB storage device ........... 37
Repeat, Option menu ..................................... 41
Resetting remote control code ....................... 55
Resolution, HDMI, Function Setup ............... 50
RETURN, remote control ................................ 7
Reverb Delay, sound field parameter ............ 44
Reverb Level, sound field parameter ............. 44
Reverb Time, sound field parameter ............. 44
Roleplaying Game, sound field program ....... 27
Room Size, sound field parameter ................. 43
■
S
SCENE function ............................................ 23
SCENE IR, advanced setup ........................... 57
SCENE, front panel ......................................... 4
SCENE, remote control ................................... 7
Sci-Fi, sound field program ........................... 26
Selecting a source on GUI screen .................. 24
Selecting SCENE ........................................... 23
Setting remote control code ........................... 55
Setting remote control ID .............................. 57
Setup menu .................................................... 46
Setup menu basic operation ........................... 47
Shuffle playback, iPod ................................... 35
Shuffle playback, USB storage device .......... 37
Shuffle, Option menu .................................... 41
Signal Info, Option menu .............................. 40
74 En
SILENT CINEMA .........................................29
SLEEP indicator, front panel display ...............6
Sleep timer .....................................................38
SLEEP, remote control ....................................7
Sound field parameter ....................................42
Sound field program editing ..........................42
Sound field program registration,
SCENE function ........................................24
Sound selection keys, remote control ..............7
Sound Setup, Setup menu ..............................49
SOURCE POWER, remote control .................7
SP IMP., advanced setup ................................57
Speaker cable connection ...............................12
Speaker Configuration,
Manual Setup, Speaker Setup ....................47
Speaker connection ........................................11
Speaker Distance, Manual Setup,
Speaker Setup ............................................49
Speaker indicator, front panel display ..............6
Speaker layout ................................................10
Speaker Level, Manual Setup,
Speaker Setup ............................................49
Speaker placement .........................................10
Speaker Setup, Setup menu ............................47
SPEAKERS terminal, rear panel .....................5
Specifications .................................................72
Spectacle, sound field program ......................26
Sports, sound field program ...........................27
Standby Through, HDMI, Function Setup .....50
Staright decode mode .....................................29
Straight Enhancer, sound field program .........28
STRAIGHT, front panel ..................................4
Subwoofer ......................................................10
Subwoofer Phase, Manual Setup,
Speaker Setup ............................................49
Sur. Back Initial Delay,
sound field parameter ................................43
Sur. Back Liveness, sound field parameter ....43
Sur. Back Room Size,
sound field parameter ................................43
Sur. Initial Delay, sound field parameter .......43
Sur. Liveness, sound field parameter .............43
Sur. Room Size, sound field parameter ..........43
Surround back left speaker .............................10
Surround Back Level,
sound field parameter ................................44
Surround back right speaker ...........................10
Surround back speaker ...................................10
Surround Back Speaker, Manual Setup,
Speaker Setup ............................................48
Surround decoder editing ...............................42
Surround L Level, sound field parameter ......44
Surround left speaker .....................................10
Surround R Level, sound field parameter ......44
Surround right speaker ...................................10
Surround Speaker, Manual Setup,
Speaker Setup ............................................48
■
■
U
Updating firmware ......................................... 57
USB port, front panel ....................................... 4
USB storage device connection ..................... 18
USB storage device playback ........................ 37
USB, troubleshooting .................................... 65
■
V
VER, advanced setup ..................................... 57
VIDEO (VIDEO AUX) jack, front panel ........ 4
VIDEO jack ................................................... 13
Video jack ...................................................... 13
Video Out, Option menu ............................... 41
Video/audio jack ............................................ 13
Virtual CINEMA DSP ................................... 29
VOLUME +/-, remote control ......................... 7
VOLUME control, front panel ........................ 4
VOLUME indicator, front panel display ......... 6
Volume Trim, Option menu .......................... 39
Volume, Function Setup ................................ 51
■
Y
YPAO ............................................................ 20
YPAO, troubleshooting ................................. 65
■
Z
ZONE2 CONTROL, front panel ..................... 4
ZONE2 indicator, front panel display ............. 6
Zone2 Initial Volume, Zone2,
Function Setup .......................................... 52
Zone2 Max Volume, Zone2,
Function Setup .......................................... 52
ZONE2 ON/OFF, front panel .......................... 4
ZONE2 OUT jack, rear panel .......................... 5
Zone2, Function Setup ................................... 52
T
Test Tone, Manual Setup, Speaker Setup ......49
The Bottom Line, sound field program ..........27
The Roxy Theatre, sound field program ........27
Tone control ...................................................24
TONE CONTROL, front panel ........................4
TRANSMIT, remote control ............................7
Transmitting remote control signal ................17
TRIGGER OUT jack, rear panel ......................5
Tuner (FM/AM), troubleshooting ..................62
Tuner indicator, front panel display .................6
Tuner key, remote control ................................7
TUNING l / h, front panel ...........................4
Tuning, AM ....................................................30
Tuning, FM ....................................................30
Turning off .....................................................19
Turning on ......................................................19
TV control key, remote control ........................7
TV monitor connection ..................................14
“KMAIN ZONE ON/OFF” or
“pPOWER” (example)
indicates the name of the parts on
the front panel or the remote
control. Refer to “Part names and
functions” on page 4.
Information about software
About FLAC codec library
Copyright (C) 2000,2001,2002,2003,2004 Josh Coalson
Redistribution and use in source and binary forms, with or
without modification, are permitted provided that the
following conditions are met:
– Redistributions of source code must retain the above
copyright notice, this list of conditions and the
following disclaimer.
– Redistributions in binary form must reproduce the
above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or other
materials provided with the distribution.
– Neither the name of the Xiph.org Foundation nor the
names of its contributors may be used to endorse or
promote products derived from this software without
specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE
COPYRIGHT HOLDERS AND CONTRIBUTORS “AS
IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE
FOUNDATION OR CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED
AND ON ANY THEORY OF LIABILITY, WHETHER
IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
About Vorbis library
Copyright (c) 2001, Xiphophorus
Redistribution and use in source and binary forms, with or
without modification, are permitted provided that the
following conditions are met:
– Redistributions of source code must retain the above
copyright notice, this list of conditions and the
following disclaimer.
– Redistributions in binary form must reproduce the
above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or other
materials provided with the distribution.
– Neither the name of the Xiphophorus nor the names of
its contributors may be used to endorse or promote
products derived from this software without specific
prior written permission.
THIS SOFTWARE IS PROVIDED BY THE
COPYRIGHT HOLDERS AND CONTRIBUTORS “AS
IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE REGENTS
OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
OR CONSEQUENTIAL DAMAGES (INCLUDING,
BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE
OR OTHERWISE) ARISING IN ANY WAY OUT OF
THE USE OF THIS SOFTWARE, EVEN IF ADVISED
OF THE POSSIBILITY OF SUCH DAMAGE.
i
List of remote control codes
TV
A.R. Systems
Acme
Acura
ADC
Admiral
0274
0260
0261, 0273
0259
0100, 0224, 0257,
0258, 0259, 0264,
0265
Advent
0204
Adventura
0107
Adyson
0260, 0327, 0328
Agashi
0327, 0328
Agazi
0259
Aiko
0260, 0261, 0273,
0274, 0327, 0328
Aim
0274
Aiwa
0028, 0297
Akai
0063, 0096, 0101,
0205, 0231, 0261,
0262, 0268, 0271,
0273, 0274, 0327,
0328
Akiba
0262, 0274
Akura
0259, 0262, 0273,
0274
Alaron
0327
Alba
0243, 0260, 0261,
0262, 0266, 0269,
0271, 0273, 0274,
0294, 0300, 0327
Albatron
0222
Alcyon
0249
Alleron
0105
Allorgan
0328
Allstar
0268, 0274
America Action 0225
AMOi
0326
Amplivision
0243, 0260, 0275,
0328
Amstrad
0259, 0261, 0262,
0273, 0274
Amtron
0104
Anam
0225, 0261
Anam National 0102, 0104
Anglo
0261, 0273
Anitech
0249, 0259, 0261,
0273, 0274
Ansonic
0243, 0250, 0261,
0263, 0273, 0274
AOC
0072, 0090, 0096,
0103
Apex
0061, 0117, 0139
Arcam
0327, 0328
Arcam Delta
0260
Aristona
0268, 0271, 0274
Arthur Martin 0275
ASA
0257, 0265
Asberg
0249, 0268, 0274
Astra
0261
Asuka
0259, 0260, 0262,
0327, 0328
Atlantic
0260, 0268, 0271,
0274, 0327
Atori
0261, 0273
Auchan
0275
Audiosonic
0243, 0260, 0261,
0262, 0268, 0271,
0274, 0328
AudioTon
0243, 0260, 0328
Audiovox
0104, 0144, 0225
ii
Ausind
Autovox
Aventura
Awa
Axion
Baird
Bang & Olufsen
Basic Line
Bastide
Baur
Bazin
Beko
Belcor
Bell & Howell
Benq
Beon
Best
Bestar
Binatone
Blue Sky
Blue Star
Boots
BPL
Bradford
Brandt
Brillian
Brinkmann
Brionvega
Britannia
Brockwood
Broksonic
Bruns
BTC
Bush
Candle
Capsonic
Carena
Carnivale
Carrefour
Carver
Cascade
Casio
Cathay
CCE
Celebrity
Celera
Centurion
Century
CGE
Changhong
Chimei
Cimline
Citizen
City
Clarion
Clarivox
0249
0249, 0257, 0259,
0260, 0328
0097
0327, 0328
0206
0328
0230, 0257
0261, 0262, 0268,
0273, 0274, 0328
0260, 0328
0271, 0274
0328
0243, 0269, 0274,
0282, 0351, 0357,
0372, 0380
0090
0065, 0100
0051, 0160, 0315
0268, 0271, 0274
0243
0243, 0268, 0274
0260, 0328
0262, 0274
0270
0260, 0328
0270, 0274
0104, 0225
0267, 0272
0228
0274
0257, 0268, 0271,
0274
0260, 0327, 0328
0090
0063, 0225
0257
0262
0261, 0262, 0264,
0266, 0268, 0270,
0271, 0273, 0274,
0282, 0286, 0294,
0300, 0328, 0329,
0351, 0388, 0394,
0413
0072, 0090, 0096,
0107
0259
0274
0096
0266
0088
0261, 0273, 0274
0317
0268, 0271, 0274
0229, 0328
0057, 0101
0117
0268, 0271, 0274
0257
0243, 0249
0117
0323
0261, 0273
0072, 0085, 0090,
0096, 0104
0261, 0273
0225
0271
Clatronic
0243, 0249, 0259,
0260, 0261, 0262,
0268, 0269, 0273,
0274, 0328
CMS
0327
CMS Hightec 0328
Coby
0151
Colortyme
0072, 0090
Commercial Solutions
0071
Concerto
0072, 0090
Concorde
0261, 0273
Condor
0243, 0260, 0268,
0269, 0273, 0274,
0327
Contec
0225, 0260, 0261,
0266, 0273, 0327
Contec/Cony 0094, 0104
Continental Edison
0267
Cosmel
0261, 0273
Craig
0104, 0225
Crosley
0088, 0119, 0249,
0257
Crown
0104, 0225, 0243,
0249, 0261, 0268,
0269, 0271, 0273,
0274
CS Electronics 0260, 0262, 0327
CTC Clatronic 0263
CTX
0159
Curtis Mathes 0065, 0071, 0072,
0085, 0088, 0090,
0096, 0099, 0224
CXC
0104, 0225
Cybertron
0262
Cytron
0202
Daewoo
0072, 0085, 0090,
0103, 0119, 0245,
0260, 0261, 0268,
0273, 0274, 0281,
0285, 0303, 0321,
0327, 0328, 0344,
0361, 0387
Dainichi
0262, 0327
Dansai
0259, 0268, 0271,
0274, 0327, 0328
Dantax
0243, 0271
Dawa
0274
Daytron
0072, 0085, 0090,
0261, 0273
De Graaf
0264
Decca
0260, 0268, 0271,
0274, 0328
Dell
0167, 0195
Denver
0308, 0312
Desmet
0268, 0271, 0274
Diamant
0274
Diamond
0327
DiamondVision 0213, 0221
Dimensia
0099
Disney
0137
Dixi
0261, 0268, 0271,
0273, 0274, 0328
Dream Vision 0415, 0416
DTS
0261, 0273
Dual
0260, 0274, 0328
Dual-Tec
0260, 0261
Dumont
0076, 0090, 0108,
0257, 0260, 0263,
0328
Durabrand
0077, 0097, 0133,
0225
Dux
0271
Dwin
0224
Dynatron
0268, 0271, 0274
Dynex
0181, 0182
Elbe
0243, 0250, 0274,
0328
Elcit
0257
Electa
0270
ELECTRO TECH 0261
Electroband
0057, 0101
Electrograph
0226
Electrohome
0072, 0090, 0101,
0102
Element
0180
Elin
0260, 0268, 0271,
0273, 0274, 0327
Elite
0262, 0268, 0274
Elman
0263
Elta
0261, 0273, 0327
Emerson
0065, 0072, 0077,
0082, 0085, 0090,
0094, 0095, 0097,
0104, 0105, 0119,
0225, 0243, 0257,
0274
Emprex
0200
Envision
0072, 0090, 0096
Epson
0156, 0201, 0309
Erres
0268, 0271, 0274
ESA
0097
ESC
0328
Etron
0261
Eurofeel
0328
Euro-Feel
0259
Euroline
0271
Euroman
0243, 0327, 0328
Euromann
0259, 0260, 0268,
0274
Europhon
0260, 0263, 0268,
0274, 0327, 0328
Expert
0275
Exquisit
0274
Fenner
0261, 0273
Ferguson
0267, 0271, 0272
Fidelity
0260, 0264, 0274,
0327
Filsai
0328
Finlandia
0264
Finlux
0249, 0257, 0260,
0263, 0268, 0271,
0274, 0328
FIRST LINE 0260, 0261, 0268
Firstline
0273, 0274, 0327,
0328
Fisher
0065, 0243, 0257,
0260, 0266, 0269,
0328
Flint
0268, 0274
Formenti
0249, 0257, 0258,
0260, 0271, 0327
Formenti/Phoenix 0327
Fortress
0257, 0258
Fraba
0243, 0274
Friac
0243
Frontech
0259, 0261, 0264,
0265, 0273, 0328
Fujitsu
0023, 0024, 0025,
0105, 0328
Fujitsu General 0328
Fujitsu Siemens 0425, 0426, 0427,
0428, 0429
Funai
0033, 0034, 0035,
0036, 0037, 0097,
0104, 0105, 0225,
0259
Futuretech
0104, 0225
Galaxi
0269, 0274
Galaxis
0243, 0274
Gateway
0163, 0226, 0227
GBC
0261, 0266, 0273
GE
0069, 0071, 0072,
0073, 0077, 0090,
0099, 0102, 0106,
0112, 0131
Geant Casino 0275
GEC
0260, 0265, 0268,
0271, 0274, 0328
Geloso
0261, 0264, 0273
General Technic 0261, 0273
Genexxa
0262, 0265, 0268,
0274
GFM
0177, 0210
Giant
0328
Gibralter
0076, 0090, 0096,
0108
GoldHand
0327
Goldline
0274
GoldStar
0072, 0077, 0085,
0090, 0094, 0096,
0103, 0243, 0260,
0261, 0264, 0268,
0271, 0273, 0274,
0327, 0328
Goodmans
0164, 0259, 0261,
0266, 0268, 0271,
0273, 0274, 0322,
0328, 0395, 0399,
0412
Gorenje
0243, 0269
GPM
0262
GPX
0211
Gradiente
0162
Graetz
0265
Granada
0249, 0260, 0264,
0266, 0268, 0271,
0274, 0275, 0328
Grandin
0261, 0262, 0270,
0271
Gronic
0328
Grundig
0242, 0243, 0249,
0274, 0356
Grunpy
0104, 0105, 0225
Haier
0187, 0207
Halifax
0259, 0260, 0327,
0328
Hallmark
0072, 0077, 0090
Hampton
0260, 0327, 0328
Hanseatic
0243, 0250, 0260,
0261, 0266, 0268,
0271, 0273, 0274,
0328
Hantarex
0261, 0273, 0274
Hantor
0274
Harman/Kardon
0088
Harvard
0104, 0225
Harwood
0273, 0274
Havermy
0224
HCM
0259, 0260, 0261,
0270, 0273, 0274,
0328
Hema
0273, 0328
Hewlett Packard 0146
Higashi
0327
HiLine
0274
Hinari
Hisawa
Hisense
Hitachi
Hornyphon
Hoshai
Huanyu
Hygashi
Hyper
Hypson
Hyundai
Iberia
ICE
ICeS
Ilo
IMA
Imperial
Indiana
Infinity
InFocus
Ingelen
Ingersol
Initial
Inno Hit
Innovation
Insignia
Inteq
Interactive
Interbuy
Interfunk
International
Intervision
Irradio
Isukai
ITC
ITS
ITT
ITV
Janeil
JBL
JC Penney
JCB
Jensen
JVC
0261, 0262, 0266,
0268, 0271, 0273,
0274
0262, 0270, 0275
0165
0006, 0014, 0015,
0016, 0042, 0072,
0090, 0094, 0173,
0254, 0255, 0256,
0260, 0264, 0265,
0266, 0274, 0285,
0300, 0319, 0328,
0348, 0349, 0385,
0402, 0410
0268, 0274
0262
0260, 0327
0260, 0327, 0328
0260, 0261, 0273,
0327, 0328
0259, 0260, 0268,
0270, 0271, 0274,
0275, 0328
0223
0274
0259, 0260, 0261,
0262, 0268, 0273,
0274, 0327, 0328
0327
0198, 0203
0104
0243, 0249, 0265,
0268, 0269, 0274
0268, 0271, 0274
0088
0168, 0277, 0313,
0397, 0430
0265
0261, 0273
0203
0249, 0260, 0261,
0262, 0268, 0271,
0273, 0274, 0328
0259, 0261
0182, 0188, 0190,
0209
0076
0243
0261, 0273
0243, 0257, 0265,
0268, 0271, 0274
0327
0243, 0259, 0260,
0263, 0274, 0328
0249, 0261, 0262,
0268, 0271, 0273,
0274
0262, 0274
0260, 0328
0262, 0268, 0270,
0274, 0327
0261, 0265
0261, 0271, 0274
0107
0088
0072, 0073, 0085,
0090, 0099, 0103,
0106
0057, 0101
0072, 0090
0017, 0018, 0019,
0092, 0093, 0094,
0106, 0251, 0252,
0266, 0268, 0293,
0360, 0379
Kaisui
Kamosonic
Kamp
Kapsch
Karcher
Kawasho
KEC
Kendo
Kenwood
KIC
Kingsley
KLH
Kloss Novabeam
Kneissel
Kolster
Konka
Korpel
Korting
Kosmos
Koyoda
KTV
Kyoto
Lasat
Lenco
Lenoir
Leyco
LG
LG/GoldStar
Liesenk
Liesenkotter
Life
Lifetec
Lloyds
Loewe
Loewe Opta
Logik
Luma
Lumatron
Lux May
Luxman
Luxor
LXI
M Electronic
MAG
Magnadyne
Magnafon
0260, 0261, 0262,
0270, 0273, 0274,
0327, 0328
0260
0260, 0327
0265
0243, 0260, 0261,
0271, 0274
0072, 0090, 0101,
0327
0225
0243, 0263, 0264,
0274
0072, 0090, 0096
0328
0260, 0327
0117
0104, 0107
0243, 0250, 0274
0268, 0274
0262
0268, 0271, 0274
0243, 0257
0274
0261
0085, 0096, 0104,
0225, 0229, 0260,
0328
0327, 0328
0243
0261, 0273
0260, 0261, 0273
0259, 0268, 0271,
0274
0016, 0038, 0039,
0077, 0103, 0145,
0222, 0243, 0246,
0253, 0260, 0261,
0264, 0268, 0271,
0273, 0274, 0282,
0290, 0299, 0316,
0327, 0328, 0351,
0359, 0367, 0382,
0384, 0389, 0396
0246
0271
0274
0259, 0261
0259, 0261, 0273,
0274
0273
0243, 0250, 0274,
0280, 0306, 0347
0257, 0268, 0271
0100
0264, 0271, 0273,
0274
0264, 0268, 0271,
0274, 0328
0268
0072, 0090
0260, 0264, 0328
0061, 0065, 0071,
0072, 0073, 0077,
0088, 0099
0260, 0261, 0265,
0267, 0268, 0271
0050
0257, 0263, 0271
0249, 0260, 0263,
0327
Magnavox
0072, 0088, 0090,
0091, 0095, 0096,
0098, 0114, 0115,
0129, 0134, 0176,
0178, 0189, 0210
Magnum
0259, 0261
Majestic
0100
Mandor
0259
Manesth
0259, 0260, 0268,
0271, 0274, 0328
Marantz
0072, 0088, 0090,
0096, 0158, 0268,
0271, 0274
Marelli
0257
Mark
0268, 0271, 0273,
0274, 0327, 0328
Masuda
0328
Matsui
0260, 0261, 0264,
0266, 0268, 0271,
0273, 0274, 0328,
0405
Matsushita
0067
Maxent
0193, 0226
Mediator
0268, 0271, 0274
Medion
0259, 0261, 0274
Megapower
0222
Megatron
0072, 0077
MElectronic
0273, 0274, 0327,
0328
Melvox
0275
Memorex
0065, 0072, 0077,
0100, 0103, 0133,
0219, 0261, 0273
Memphis
0261, 0273
Mercury
0273, 0274
Metz
0257
MGA
0072, 0077, 0090,
0096, 0103
Micromaxx
0259, 0261
Microstar
0259, 0261
Midland
0069, 0071, 0073,
0076, 0085, 0106,
0108
Minerva
0249
Minoka
0268, 0274
Mintek
0203
Mitsubishi
0006, 0015, 0016,
0048, 0072, 0077,
0090, 0103, 0196,
0224, 0257, 0266,
0268, 0274, 0298,
0371
Mivar
0243, 0249, 0250,
0260, 0327, 0328
Monivision
0222
Montgomery Ward
0100
Motion
0249
Motorola
0102, 0224
MTC
0072, 0090, 0096,
0103, 0243, 0327
Multi System 0271
Multitech
0104, 0225, 0229,
0243, 0260, 0261,
0263, 0264, 0266,
0271, 0273, 0274,
0327, 0328
Murphy
0260, 0327
NAD
0061, 0072, 0077
Naonis
0264
NEC
0026, 0053, 0072,
0090, 0096, 0102,
0103, 0266, 0328
iii
Neckermann
NEI
Net-TV
Neufunk
New Tech
New World
NewTech
Nicamagic
Nikkai
Nikko
Nobliko
Nokia
Norcent
Nordic
Nordmende
Nordvision
Novatronic
Oceanic
Okano
Olevia
ONCEAS
Onwa
Opera
Oppo
Optimus
Optoma
Optonica
Orbit
Orion
Orline
Osaki
Oso
Otto Versand
Pael
Palladium
Palsonic
Panama
Panasonic
Panavision
Pathe Cinema
Pausa
Penney
Perdio
Perfekt
Philco
Philharmonic
Philips
iv
0243, 0257, 0260,
0264, 0268, 0269,
0271, 0274, 0328
0268, 0271, 0274
0226
0273, 0274
0261, 0268
0262
0273, 0274, 0328
0260, 0327
0259, 0260, 0262,
0268, 0271, 0273,
0274, 0327, 0328
0072, 0077, 0096
0249, 0260, 0263,
0327
0265
0155
0328
0257, 0265, 0267,
0268
0271
0274
0265, 0275
0243, 0269, 0274
0052, 0140, 0149,
0154, 0157
0260
0104, 0225
0274
0208
0065, 0067
0194
0224
0268, 0274
0121, 0192, 0261,
0268, 0271, 0273,
0274, 0282, 0329
0274
0259, 0260, 0262,
0274, 0328
0262
0258, 0260, 0266,
0268, 0270, 0271,
0274, 0328
0260, 0327
0243, 0260, 0269,
0274, 0328
0328
0259, 0260, 0261,
0273, 0274, 0327,
0328
0006, 0007, 0066,
0067, 0068, 0069,
0070, 0102, 0106,
0113, 0147, 0215,
0241, 0265, 0274,
0279, 0310, 0332,
0334, 0368, 0374
0274
0243, 0250, 0260,
0275, 0327
0261, 0273
0061, 0069, 0071,
0077, 0096
0274, 0327
0274
0072, 0088, 0090,
0091, 0094, 0096,
0102, 0103, 0243,
0249, 0257, 0274
0260, 0328
0040, 0088, 0089,
0090, 0091, 0094,
0098, 0099, 0102,
0114, 0135, 0143,
0176, 0178, 0189,
0210, 0212, 0232,
0233, 0257, 0260,
0268, 0271, 0274,
0278, 0287, 0301,
0302, 0307, 0311,
0314, 0330, 0331,
0333, 0337, 0338,
0339, 0341, 0343,
0345, 0355, 0363,
0365, 0377, 0378,
0381, 0383, 0406,
0409, 0414
Philips Magnavox 0089, 0114, 0115
Phoenix
0243, 0257, 0268,
0271, 0274, 0327
Phonola
0257, 0268, 0271,
0274, 0327
Pilot
0085, 0090, 0096
Pioneer
0012, 0013, 0072,
0090, 0243, 0265,
0267, 0268, 0271,
0274, 0408
Plantron
0259, 0268, 0273,
0274
Playsonic
0328
Polaroid
0117, 0152, 0184,
0220
Poppy
0261, 0273
Portland
0072, 0085, 0090,
0103
Prandoni-Prince
0249, 0264
Precision
0260, 0328
Prima
0161, 0207, 0261,
0265, 0273
Princeton
0222
Prism
0069, 0106
Profex
0261, 0273
Profi-Tronic
0268, 0274
Proline
0268, 0274
Proscan
0071, 0073, 0099
Prosonic
0243, 0260, 0271,
0274, 0327, 0328
Protech
0259, 0260, 0261,
0263, 0268, 0271,
0328
Proton
0072, 0077, 0090,
0094
Protron
0150
PROVIEW
0050, 0164
Provision
0271, 0274
Pulsar
0076, 0090, 0108
Pye
0268, 0271, 0274,
0296, 0338
Pymi
0261, 0273
Quandra Vision
0275
Quasar
0067, 0069, 0102,
0106
Quelle
0259, 0260, 0268,
0271, 0274, 0328
Questa
0266
Radialva
0274
RadioShack
0065, 0071, 0077,
0096, 0225, 0274
RadioShack/Realistic
0072, 0085, 0090,
0094, 0099, 0104
Radiola
0268, 0271, 0274,
0328
Radiomarelli
0257, 0274
Radiotone
0243, 0268, 0273,
0274
Rank
0266
RCA
Realistic
Recor
Redstar
Reflex
Revox
Rex
RFT
Rhapsody
R-Line
Roadstar
Robotron
Rowa
Royal Lux
RTF
Runco
Saba
Saisho
Salora
Sambers
Sampo
Samsung
Sandra
Sansui
Sanyo
SBR
Sceptre
Schaub Lorenz
Schneider
Scotch
Scott
Sears
SEG
SEI
0071, 0072, 0073,
0074, 0075, 0090,
0099, 0102, 0103,
0109, 0120, 0179,
0218
0065, 0077, 0096,
0225
0274
0274
0274
0243, 0268, 0271,
0274
0259, 0264, 0265
0243, 0250, 0257
0327
0268, 0271, 0274
0259, 0261, 0262,
0273
0257
0327, 0328
0243
0257
0076, 0096, 0108
0257, 0265, 0267,
0272, 0376
0259, 0260, 0261,
0273, 0328
0264, 0265
0249, 0263
0072, 0085, 0090,
0096, 0226
0029, 0030, 0031,
0032, 0044, 0045,
0046, 0047, 0072,
0077, 0084, 0085,
0086, 0087, 0090,
0094, 0096, 0103,
0118, 0217, 0229,
0235, 0236, 0237,
0243, 0259, 0260,
0261, 0268, 0269,
0271, 0273, 0274,
0284, 0295, 0327,
0328, 0336, 0346,
0390, 0407
0260, 0327, 0328
0063, 0121, 0268,
0274
0020, 0021, 0022,
0049, 0065, 0090,
0141, 0191, 0243,
0250, 0260, 0266,
0273, 0291, 0327,
0328, 0370, 0373,
0391
0271, 0274
0166, 0185
0265
0260, 0262, 0268,
0271, 0274, 0287,
0300, 0328, 0364,
0366
0072, 0077
0072, 0077, 0090,
0094, 0104, 0105,
0199, 0225
0061, 0065, 0071,
0072, 0073, 0077,
0088, 0090, 0097,
0099, 0105
0259, 0260, 0263,
0266, 0271, 0273,
0274, 0300, 0327,
0328
0274
SEI-Sinudyne
Seleco
Sencora
Sentra
Serino
Sharp
Sheng Chia
Shogun
Siarem
Sierra
Siesta
Signature
Silva
Silver
Singer
Sinudyne
Skantic
Solavox
Sonitron
Sonoko
Sonolor
Sontec
Sony
Sound & Vision
Soundesign
Soundwave
Squareview
SSS
Standard
Starlite
Stenway
Stern
Strato
Stylandia
Sunkai
Sunstar
Sunwood
Superla
Superscan
SuperTech
Supra
Supre-Macy
Supreme
Susumu
Sutron
SVA
Sydney
0257, 0263, 0265
0264, 0265, 0266
0261, 0273
0273
0327
0009, 0010, 0011,
0072, 0080, 0081,
0082, 0083, 0085,
0090, 0094, 0110,
0148, 0183, 0216,
0224, 0247, 0248,
0258, 0266, 0288,
0304, 0324, 0325,
0340, 0358, 0362,
0369, 0386, 0392,
0398, 0400, 0401,
0403
0224
0090
0257, 0263, 0274
0268, 0274
0243
0100
0327
0266
0257, 0263, 0275
0257, 0263, 0271,
0274
0265
0265
0243, 0328
0259, 0260, 0261,
0268, 0271, 0273,
0274, 0328
0265, 0275
0243, 0268, 0271,
0274
0041, 0057, 0058,
0059, 0060, 0101,
0116, 0125, 0126,
0127, 0142, 0169,
0170, 0171, 0172,
0174, 0234, 0261,
0266, 0276, 0289,
0292, 0393, 0411
0262, 0263
0072, 0077, 0090,
0104, 0105, 0225
0268, 0271, 0274
0097
0090, 0104, 0225
0260, 0261, 0262,
0268, 0273, 0274,
0328
0104, 0225, 0271,
0273, 0274
0270
0264, 0265
0273, 0274
0328
0261
0273, 0274
0261, 0268, 0273,
0274
0260, 0327, 0328
0095, 0224
0273, 0274, 0327
0261, 0273
0107
0057, 0101
0262
0261, 0273
0197
0260, 0327, 0328
Sylvania
Symphonic
Syntax
Syntax-Brillian
Sysline
Sytong
Tandy
Tashiko
Tatung
TCM
Teac
Tec
Technics
TechniSat
Techwood
TEDELEX
Teknika
Teleavia
Telecor
Telefunken
Telegazi
Telemeister
Telesonic
Telestar
Teletech
Teleton
Televideon
Televiso
Tensai
Tesmet
Tevion
Texet
Thomson
Thorn
TMK
TNCi
Tokai
Tokyo
Tomashi
Toshiba
Totevision
Towada
Trakton
Trans Continens
Transtec
Trident
0072, 0088, 0089,
0090, 0091, 0095,
0096, 0097, 0098,
0175, 0177, 0210
0097, 0104, 0108,
0133, 0210, 0225
0149
0149
0271
0327
0224, 0258, 0260,
0262, 0265, 0328
0260, 0264, 0266,
0327, 0328
0102, 0227, 0260,
0268, 0271, 0274,
0328
0259, 0261
0274, 0328
0260, 0261, 0273,
0328
0067, 0069, 0106
0320, 0417, 0418,
0419
0069, 0072, 0090,
0106
0328
0072, 0085, 0088,
0090, 0094, 0100,
0103, 0104, 0105,
0225
0267
0274, 0328
0267, 0268, 0272,
0274
0274
0274
0274
0274
0261, 0271, 0273,
0274
0260, 0328
0327
0275
0261, 0262, 0268,
0273, 0274, 0328
0268
0259, 0261
0260, 0273, 0327,
0328
0238, 0239, 0240,
0260, 0267, 0268,
0272, 0274, 0335
0271, 0274
0072, 0077, 0090
0076
0268, 0274, 0328
0260, 0327
0270
0027, 0043, 0053,
0054, 0061, 0062,
0063, 0064, 0065,
0122, 0123, 0124,
0128, 0130, 0132,
0139, 0214, 0244,
0266, 0283, 0305,
0328, 0329, 0342,
0350, 0352, 0353,
0354, 0375, 0404
0085
0265, 0328
0328
0274, 0328
0327
0328
Triumph
Uher
0274
0243, 0249, 0265,
0268, 0274
Ultravox
0257, 0260, 0263,
0274, 0327
Unic Line
0274
United
0271
Universum
0243, 0249, 0259,
0268, 0269, 0271,
0274, 0328
Univox
0274
Vector Research
0096
Vestel
0264, 0265, 0268,
0269, 0271, 0274,
0328
Vexa
0261, 0271, 0273,
0274
Victor
0093, 0266, 0268
VIDEOLOGIC 0327
Videologique 0260, 0262, 0327,
0328
VideoSystem 0268, 0274
Videotechnic 0327, 0328
Vidikron
0088
Vidtech
0072, 0077, 0090,
0103
Viewsonic
0153, 0186, 0226,
0318
Viking
0107
Viore
0198
Visiola
0260, 0327
Vision
0268, 0274, 0328
Vizio
0090, 0136, 0160,
0227, 0420, 0421,
0422, 0423, 0424
Vortec
0268, 0271, 0274
Voxson
0249, 0257, 0264,
0265, 0268, 0274
Waltham
0260, 0274, 0328
Wards
0072, 0077, 0088,
0090, 0091, 0096,
0098, 0099, 0100,
0103, 0105
Watson
0268, 0271, 0274
Watt Radio
0260, 0263, 0327
Waycon
0061
Wega
0257, 0266, 0274
Wegavox
0273
Weltblick
0268, 0271, 0274,
0328
Westinghouse 0057, 0138, 0142
White Westinghouse
0008, 0119, 0260,
0263, 0271, 0274,
0327
Wincom
0055, 0056
Xrypton
0274
Yamaha
0000, 0001, 0002,
0003, 0004, 0005,
0072, 0090, 0096,
0103
Yamishi
0274, 0328
Yokan
0274
Yoko
0243, 0259, 0260,
0261, 0262, 0268,
0271, 0273, 0274,
0327, 0328
Yorx
0262
Zanussi
0264, 0328
Zenith
0076, 0077, 0078,
0079, 0090, 0100,
0108, 0111
VCR
ABS
1066
Adventura
Adyson
Aiwa
1023
1090
1023, 1072, 1073,
1074
Akai
1071, 1073
Akiba
1079, 1090
Akura
1073, 1079, 1090
Alba
1074, 1075, 1076,
1079, 1090, 1091
Alienware
1066
Ambassador
1076
American High 1022
Amstrad
1072, 1090, 1091
Anitech
1079, 1090
Apex
1010
ASA
1077, 1078
Asha
1020
Asuka
1072, 1077, 1078,
1079, 1090
Audio Dynamics 1018
Audiosonic
1091
Audiovox
1021
Baird
1072, 1073, 1075,
1091
Bang & Olufsen 1067
Basic Line
1074, 1075, 1076,
1079, 1090, 1091
Baur
1078
Beaumark
1020
Bell & Howell 1019
Bestar
1075, 1076, 1091
Black Panther Line
1075, 1091
Blaupunkt
1078
Bondstec
1076, 1090
Broksonic
1054
Bush
1074, 1075, 1079,
1090, 1091, 1097,
1099, 1109, 1139
Calix
1021
Candle
1020, 1021
Canon
1022
Cathay
1091
Catron
1076
CGE
1072, 1073
Cimline
1074, 1079, 1090
CineVision
1058
Citizen
1020, 1021
Clatronic
1076, 1090
Colortyme
1018
Condor
1075, 1076, 1091
Craig
1020, 1021
Crown
1075, 1076, 1079,
1090, 1091
Curtis Mathes 1018, 1020, 1022
Cybernex
1020
CyberPower
1066
Daewoo
1023, 1075, 1076,
1091, 1116, 1141
Dansai
1079, 1090, 1091
Dantax
1074
Daytron
1075, 1091
DBX
1018
De Graaf
1078
Decca
1072, 1073, 1078
Dell
1066
Denko
1090
DiamondVision 1050
DigiFusion
1092
DIRECTV
1035, 1038, 1040,
1059, 1060, 1061,
1065
Dish Network 1064
Dishpro
1064
Dual
1073, 1078, 1091
Dumont
Durabrand
Dynatech
Echostar
Elbe
Elcatech
Electrohome
Electrophonic
Elsay
Elta
Emerson
1072, 1078
1032
1023
1064
1091
1090
1021
1021
1090
1079, 1090, 1091
1021, 1022, 1023,
1070, 1090
ESC
1075, 1091
Etzuko
1079, 1090
Expressvu
1064
Ferguson
1073
Fidelity
1072, 1090
Finlandia
1078
Finlux
1072, 1073, 1078
Firstline
1074, 1077, 1079,
1090
Fisher
1019
Flint
1074
Formenti/Phoenix 1078
Frontech
1076
Fuji
1022
Fujitsu
1072
Funai
1023, 1072
Galaxy
1072
Garrard
1023
Gateway
1066
GBC
1076, 1079
GE
1020, 1022
GEC
1078
Geloso
1079
General
1076
General Technic 1074
GOI
1064
GoldHand
1079, 1090
Goldstar
1018, 1021, 1072,
1077
Goodmans
1072, 1075, 1076,
1077, 1079, 1090,
1091
Gradiente
1023
Graetz
1073
Granada
1078
Grandin
1072, 1075, 1076,
1077, 1079, 1090,
1091
Grundig
1078, 1079
Hanseatic
1077, 1078, 1091
Harley Davidson 1023
Harman/Kardon
1018
Harwood
1090
HCM
1079, 1090
Headquarter
1019
Hewlett Packard 1066
Hinari
1074, 1079, 1090,
1091
Hisawa
1074
Hitachi
1072, 1073, 1078,
1089, 1108, 1124
HNS
1060
Howard Computers
1066
HP
1066
HTS
1064
Hughes
1035, 1040, 1061
Hughes Network Systems
1038, 1060
Humax
1035, 1060, 1094
Hush
1066
Hypson
1074, 1079, 1090,
1091
v
iBUYPOWER
Impego
Imperial
Inno Hit
1066
1076
1072
1075, 1076, 1078,
1079, 1090, 1091
Innovation
1074
Instant Replay 1022
Interbuy
1077, 1090
Interfunk
1078
Intervision
1072, 1091
Irradio
1077, 1079, 1090
ITT
1073
ITV
1075, 1077, 1091
JC Penney
1018, 1019, 1020,
1021, 1022
JCL
1022
JVC
1011, 1012, 1013,
1014, 1015, 1016,
1017, 1018, 1019,
1028, 1035, 1064,
1073, 1085, 1117,
1130, 1131, 1133,
1134, 1135, 1136
Kaisui
1079, 1090
Karcher
1078
Kendo
1074, 1075, 1076,
1090
Kenwood
1018, 1019, 1073
Kodak
1021, 1022
Korpel
1079, 1090
Kyoto
1090
Lenco
1075
Leyco
1079, 1090
LG
1021, 1053, 1072,
1077, 1088, 1100,
1106, 1125, 1143
Lifetec
1074
Linksys
1066
Lloyd’s
1023
Loewe Opta
1077, 1078
Logik
1079, 1090
Lumatron
1075, 1091
Luxor
1090
LXI
1021
M Electronic 1072
Magnavox
1022, 1032, 1044,
1070
Magnin
1021
Manesth
1079, 1090
Marantz
1018, 1019, 1022,
1078
Mark
1091
Marta
1021
Matsui
1074, 1077
Matsushita
1022
Media Center PC 1066
Mediator
1078
Medion
1074
MEI
1022
Memorex
1019, 1020, 1021,
1022, 1023, 1032,
1048, 1069, 1072,
1077
Memphis
1079, 1090
MGN Technology 1020
Micromaxx
1074
Microsoft
1066
Microstar
1074
Migros
1072
Mind
1066
Mitsubishi
1029, 1072, 1078
Motorola
1022
MTC
1020
vi
Multitech
1020, 1023, 1072,
1076, 1078, 1079,
1090
Murphy
1072
NEC
1018, 1019, 1073
Neckermann
1073, 1078
NEI
1078
Nesco
1079, 1090
Nikkai
1076, 1090, 1091
Nikko
1021
Niveus Media 1066
Noblex
1020
Nokia
1073, 1091
Nordmende
1073
Northgate
1066
Oceanic
1072, 1073
Okano
1074, 1090, 1091
Olympus
1022
Optimus
1021
Orion
1033, 1069, 1074,
1097, 1139
Orson
1072
Osaki
1072, 1077, 1079,
1090
Otto Versand 1078
Palladium
1073, 1077, 1079,
1090
Panasonic
1007, 1008, 1009,
1022, 1026, 1042,
1043, 1068, 1082,
1101, 1126, 1132
Pathe Marconi 1073
Perdio
1072
Philco
1022, 1090
Philips
1022, 1030, 1035,
1038, 1039, 1040,
1044, 1055, 1060,
1078, 1084, 1095,
1096, 1104, 1105,
1111, 1113, 1122,
1124, 1127, 1128,
1129
Philips Magnavox 1030
Phonola
1078
Pilot
1021
Pioneer
1078, 1118
Polaroid
1010, 1049
Portland
1075, 1076, 1091
Prinz
1072
Profex
1079
Proline
1072
Proscan
1065
Prosonic
1074, 1091
Pulsar
1032
Pye
1052, 1078
Quarter
1019
Quartz
1019
Quasar
1022
Quelle
1072, 1078
Radialva
1090
RadioShack
1021
RadioShack/Realistic
1019, 1020, 1021,
1022, 1023
Radiola
1078
Radix
1021
Randex
1021
RCA
1020, 1022, 1025,
1035, 1040, 1047,
1060, 1065
Realistic
1019, 1020, 1021,
1022, 1023
ReplayTV
1041, 1068
Rex
1073
RFT
1076, 1078, 1090
Ricavision
Roadstar
1066
1075, 1077, 1079,
1090, 1091
Royal
1090
Runco
1032
Saba
1073
Saisho
1074, 1079
Samsung
1006, 1020, 1038,
1040, 1046, 1060,
1080, 1107, 1110,
1112, 1121, 1123,
1140, 1142
Samurai
1076, 1090
Sanky
1032
Sansui
1033, 1056, 1069,
1073
Sanyo
1019, 1020, 1114
Saville
1091
SBR
1078
Schaub Lorenz 1072, 1073
Schneider
1072, 1074, 1075,
1076, 1077, 1078,
1079, 1090, 1091
Sears
1019, 1021, 1022
SEG
1079, 1090, 1091
SEI-Sinudyne 1078
Seleco
1073
Sentra
1076, 1090
Sentron
1079, 1090
Sharp
1031, 1045, 1057,
1081, 1115, 1137
Shintom
1079, 1090
Shivaki
1077
Shogun
1020
Siemens
1077
Silva
1077
Silver
1091
Singer
1022
Sinudyne
1078
Solavox
1076
Sonic Blue
1041, 1068
Sonneclair
1090
Sonoko
1075, 1091
Sontec
1077
Sony
1000, 1001, 1002,
1003, 1024, 1027,
1036, 1062, 1066,
1083, 1098, 1103,
1138
Stack
1066
Stack 9
1066
Standard
1075, 1091
Stern
1091
STS
1022
Sunkai
1074
Sunstar
1072
Suntronic
1072
Sunwood
1079, 1090
Superscan
1070
Sylvania
1022, 1023, 1044,
1052, 1070
Symphonic
1023, 1044, 1090
Systemax
1066
Tagar Systems 1066
Taisho
1074
Tandberg
1091
Tandy
1019
Tashiko
1021, 1072
Tatung
1072, 1073, 1078
TCM
1074, 1093, 1120
Teac
1023, 1091
Tec
1076, 1090, 1091
Technics
1022
Teknika
1021, 1022, 1023
Teleavia
1073
Telefunken
Teletech
Tenosal
Tensai
1073
1090, 1091
1079, 1090
1072, 1077, 1079,
1090
Tevion
1074
Thomson
1073, 1087
Thorn
1073
Tivo
1035, 1036, 1037,
1039, 1040, 1060,
1061, 1062
TMK
1020
Tokai
1077, 1079, 1090
Tonsai
1079
Toshiba
1004, 1005, 1034,
1051, 1063, 1066,
1073, 1078, 1086,
1099, 1102, 1119,
1144
Totevision
1020, 1021
Touch
1066
Towada
1079, 1090
Towika
1079, 1090
TVA
1076
Uher
1077
UltimateTV
1065
Ultravox
1091
Unitech
1020
United Quick Star 1075, 1091
Universum
1072, 1077, 1078
Vector Research 1018
Video Concepts 1018
Videon
1074
Videosonic
1020
Viewsonic
1066
Voodoo
1066
Wards
1020, 1021, 1022,
1023
Weltblick
1077
XR-1000
1022, 1023
Yamaha
1018, 1019
Yamishi
1079, 1090
Yokan
1079, 1090
Yoko
1076, 1077, 1079,
1090
Zenith
1032
ZT Group
1066
DVD
4Kus
Accurian
Advent
AEG
Airis
Aiwa
Akai
2097
2220
2169, 2201
2312
2318
2272
2170, 2195, 2225,
2227
Akura
2310
Alba
2018, 2232, 2247,
2259, 2264
Alco
2199
Alize
2315
Allegro
2215
Amitech
2312
Amphion MediaWorks
2145
AMW
2145, 2313
Apex
2044, 2045, 2046,
2047, 2076, 2208,
2209
Apple
2163
Arrgo
2216
Asono
2318
Aspire
2140, 2202
Astar
2162
ATACOM
Audiovox
Avious
Awa
Axion
Bang & Olufsen
Baze
BBK
Bellagio
Best Buy
Blaupunkt
Blue Parade
Boghe
Brainwave
Brandt
Broksonic
Bush
2318
2111, 2199
2317
2313
2171
2210
2317
2318
2313
2309
2209
2207
2300
2312
2198, 2238
2192, 2195
2018, 2060, 2248,
2264, 2301, 2308,
2317, 2350, 2368
California Audio Labs
2197
Cambridge Audio 2304
CAT
2306, 2307
CAVS
2146
Centrum
2307
CGV
2304, 2312
Changhong
2222
Cinetec
2313
CineVision
2191, 2215
Clatronic
2308, 2317
Coby
2077, 2124, 2314
Conia
2301
Continental Edison
2313
Crown
2312
C-Tech
2305
Curtis Mathes 2217
CVG
2299
CyberHome
2048, 2068, 2216,
2233, 2258
Cytron
2166
Daenyx
2313
Daewoo
2083, 2215, 2280,
2299, 2312, 2313,
2326, 2376
Daewoo International
2313
Dalton
2311
Dansai
2303, 2312
Daytek
2145, 2234, 2313
Dayton
2313
DEC
2308
Decca
2312
Denon
2105, 2147, 2197,
2286
Denver
2288, 2308, 2310,
2314
Denzel
2302
Desay
2159
Diamond
2304, 2305
DiamondVision 2179, 2186
Disney
2078, 2088
DK Digital
2257
Dmtech
2226
Dual
2302
Durabrand
2218
DVX
2305
Easy Home
2309
Eclipse
2304
E-Dem
2318
Electrohome
2312
Elin
2312
Elta
2263, 2312, 2315
Emerson
2196, 2211, 2219
Enterprise
2211
Enzer
Epson
ESA
Finlux
Fintec
Fisher
Funai
Gateway
GE
Gericom
GFM
Giec
Global Solutions
Global Sphere
Go Video
Goodmans
2302
2165
2219
2304, 2312, 2317
2299
2212
2219
2097
2079, 2206, 2209
2269
2176
2300
2305
2305
2135, 2215
2247, 2289, 2298,
2300, 2308, 2330,
2369
GPX
2177
Gradiente
2197
Graetz
2302
Greenhill
2209
Grundig
2271
Grunkel
2312, 2316
GVG
2299
H&B
2308
H_her
2318
Haaz
2304, 2305
Haier
2172
Harman/Kardon
2125, 2213
HiMAX
2309
Hitachi
2008, 2033, 2108,
2302, 2309, 2320,
2366
Hiteker
2208
Home Tech Industries
2318
Hyundai
2316
Ilo
2167
Initial
2167, 2209
Innovation
2228
Insignia
2080, 2175, 2219
Integra
2207
Irradio
2103
iSymphony
2164
JBL
2213
JVC
2049, 2050, 2051,
2052, 2053, 2054,
2055, 2056, 2057,
2070, 2242, 2261,
2275, 2276, 2277,
2278, 2339, 2340,
2341, 2342, 2386,
2387, 2389, 2390,
2391
Jwin
2148
Kansai
2314
Kawasaki
2199
Kennex
2312
Kenwood
2123, 2197, 2270
KeyPlug
2312
Kiiro
2312
Kingavon
2308
Kiss
2302
KLH
2199, 2209
Koda
2308
Koss
2095, 2198, 2204
KXD
2309
Landel
2221
Lasonic
2214
Lawson
2305
Lecson
2303
Lenco
2308, 2312, 2317
Lenoxx
2203, 2218
LG
Life
Lifetec
Limit
Liquid Video
Liteon
Loewe
LogicLab
Magnavox
Magnex
Majestic
Marantz
Marquant
Matsui
McIntosh
Mecotek
Medion
Memorex
MiCO
Micromaxx
Microsoft
Microstar
Minoka
Minowa
Mintek
Mitsubishi
Mizuda
Monyka
Mustek
Mx Onda
Mystral
Naiko
Nesa
Neufunk
Nevir
Next Base
Nexxtech
NU-TEC
Onkyo
Oopla
Oppo
Optim
Optimus
Orava
Orbit
Orion
Oritron
P&B
Pacific
Panasonic
Parasound
peeKTON
Philips
2080, 2107, 2115,
2116, 2141, 2188,
2211, 2215, 2237,
2239, 2285, 2293,
2295, 2348, 2370
2228
2228
2305
2204
2097, 2121, 2220
2274
2305
2075, 2096, 2178,
2180, 2196, 2205,
2219, 2308
2317
2314
2282
2312
2198, 2296
2149
2312
2228
2078, 2184, 2195
2300, 2304
2228
2206
2228
2312
2317
2167, 2209
2081
2308, 2309
2302
2232
2304
2316
2312
2209
2302
2312
2221
2161
2301
2205, 2290
2097
2150, 2173
2303
2230
2308
2313
2027, 2060
2198, 2204
2308
2305
2015, 2016, 2017,
2036, 2037, 2038,
2039, 2040, 2041,
2042, 2043, 2074,
2089, 2104, 2108,
2112, 2120, 2131,
2132, 2197, 2205,
2244, 2245, 2246,
2253, 2254, 2255,
2292, 2321, 2324,
2327, 2328, 2329,
2331, 2383, 2388
2151
2318
2026, 2061, 2062,
2075, 2090, 2094,
2096, 2097, 2103,
2110, 2126, 2180,
2193, 2205, 2231,
2235, 2241, 2251,
Phonotrend
Pioneer
Pointer
Polaroid
Portland
Powerpoint
Prima
Proceed
Proscan
Prosonic
Protron
Provision
Pye
Qwestar
Raite
RCA
RedStar
Regent
Reoc
Rimax
Rio
Roadstar
Ronin
Rotel
Rowa
Rownsonic
Saba
Sabaki
Saivod
Sampo
Samsung
Sansui
Sanyo
ScanMagic
Schaub Lorenz
Schneider
Scientific Labs
Scott
Seeltech
SEG
Sharp
Shinsonic
Sigmatek
Silva
Singer
Skymaster
2252, 2256, 2260,
2268, 2282, 2332,
2333, 2343, 2344,
2345, 2367, 2371,
2373, 2380, 2382,
2385
2317
2012, 2013, 2014,
2063, 2064, 2065,
2066, 2067, 2113,
2134, 2207, 2230,
2236, 2265, 2266,
2267, 2297, 2322,
2351, 2352, 2353,
2354, 2355, 2356,
2357, 2358, 2359,
2377
2312
2047, 2133, 2185
2312
2313
2174
2208
2206
2299, 2314
2152
2308
2194
2198
2302
2058, 2059, 2071,
2079, 2183, 2199,
2206, 2207, 2209
2310, 2312, 2314
2203
2305
2315
2215
2281, 2308
2313
2153
2200, 2301
2307
2198, 2238
2305
2312
2223
2031, 2032, 2033,
2034, 2035, 2082,
2127, 2137, 2138,
2154, 2182, 2197,
2283, 2319, 2325,
2346, 2347, 2349,
2372, 2381
2027, 2195, 2304,
2305, 2312
2139, 2195, 2212,
2374
2232
2312
2226
2305
2243, 2311
2318
2240, 2302, 2305,
2313
2009, 2010, 2084,
2122, 2142, 2143,
2144, 2181, 2190,
2228, 2262, 2375
2167
2309, 2318
2310
2304, 2305
2279, 2305
vii
Skyworth
Slim Art
SM Electronic
Sonic Blue
Sontech
Sony
2310
2312
2305
2215
2316
2005, 2006, 2007,
2020, 2021, 2022,
2023, 2024, 2025,
2069, 2072, 2073,
2085, 2086, 2087,
2091, 2092, 2093,
2102, 2128, 2129,
2130, 2249, 2250,
2323, 2334, 2335,
2336, 2360, 2361,
2362, 2363, 2364,
2365, 2384
Soundmaster
2305
Soundmax
2305
Spectra
2313
Spectroniq
2155
Standard
2305
Star Cluster
2305
Starmedia
2308, 2318
Sungale
2158
Sunkai
2312
Superscan
2196
Supervision
2305
Sylvania
2094, 2180, 2189,
2196, 2219, 2224
Symphonic
2062, 2180
Synn
2305
T.D.E. Systems 2316
Tatung
2083, 2312
TCM
2228, 2379
Teac
2199, 2287, 2301,
2305
Tec
2310
Technics
2197
Technika
2312, 2317
Telefunken
2307
Tensai
2312
Tevion
2228, 2305, 2311
Theta Digital 2207
Thomson
2229, 2238, 2284,
2294
Tokai
2302, 2310
Top Suxess
2318
Toshiba
2004, 2026, 2027,
2028, 2029, 2030,
2098, 2099, 2100,
2101, 2114, 2117,
2118, 2119, 2136,
2187, 2195, 2205,
2291, 2337, 2338,
2378
TRANScontinents
2313, 2317
Transonic
2317
Trio
2312
Trutech
2160
TruVision
2309
TSM
2318
Umax
2315
United
2317
Urban Concepts 2205
US Logic
2167
Venturer
2199
Viewmaster
2318
Vocopro
2156
VocoStar
2157
Waitec
2318
Welltech
2300
Westinghouse 2109, 2168
Wharfedale
2304, 2305
viii
Woxter
Xbox
Xlogic
XMS
Xoro
Yamada
Yamaha
Yamakawa
Yukai
Zenith
2315, 2318
2206, 2229
2305, 2312
2312
2300
2097, 2313, 2315
2000, 2001, 2002,
2003, 2011, 2018,
2019, 2036, 2106,
2197, 2273
2302, 2313
2232
2080, 2141, 2205,
2211, 2215
Blu-ray Disc
LG
Panasonic
Pioneer
Samsung
Sharp
Sony
Yamaha
2115
2089, 2131, 2132
2134
2035, 2127
2142, 2143, 2144
2025
2018
DVR
Bush
Panasonic
Philips
Pioneer
RCA
Samsung
Yamaha
2060
2037, 2038, 2039,
2040, 2041, 2042
2061, 2062
2063, 2064, 2065,
2066, 2067
2059
2035
2036
DVD Recorder
Aspire
Astar
Broksonic
Go Video
Hitachi
Insignia
Irradio
JVC
LG
Liteon
Panasonic
Philips
Pioneer
Pye
Samsung
Sansui
Sanyo
Sony
Sylvania
Toshiba
Yamaha
2140
2162
2192
2135
2108
2080
2103
2054, 2055, 2056,
2057
2107, 2115, 2141,
2188
2121
2037, 2038, 2039,
2041, 2042, 2043,
2089, 2104, 2108,
2112
2090, 2096, 2097,
2126, 2193
2067, 2113
2194
2034, 2082, 2138
2027
2139
2022, 2023, 2024,
2085, 2086, 2087,
2102, 2128, 2129,
2130
2189
2030, 2099, 2100,
2101, 2114, 2117,
2118, 2119
2106
Cable
ABC
ADB
Adelphia
3004, 3015, 3016,
3017, 3037, 3040,
3067, 3080, 3081
3070
3003
Alcatel
3066
Americast
3046
Amstrad
3048, 3068
Antronix
3019, 3020
Archer
3020
Arcon
3048
AT&T
3013
Axis
3048
Bell South
3046
Cable Vision
3014
Cabletenna
3019
Cabletime
3058
Cableview
3005
Clearmaster
3045
ClearMax
3045
Clyde Cablevision
3059
Colour Voice 3022
Comcast
3006, 3010, 3039
Comcrypt
3057
Comtronics
3023
Contec
3024
Coolmax
3045
COX
3006
Cryptovision
3060
Director
3006
Eastern
3025
Everquest
3041
Fidelity
3048
Filmnet
3057
Filmnet Cablecrypt
3061
Filmnet Comcrypt
3061
Finlux
3051
Focus
3044
Foxtel
3068
France Telecom 3054, 3055
Freebox
3069
GC Electronics 3020
GE
3015, 3016
GEC
3059
Gemini
3026, 3041
General Instrument
3006, 3008, 3016,
3039, 3050, 3067,
3075
Goldstar
3042
Gooding
3049
Grundig
3048, 3049
Hamlin
3027, 3028
Hirschmann
3051
Hitachi
3016
HomeChoice 3056
Humax
3001, 3002, 3071
ITT Nokia
3051
Jasco
3041
Jerrold
3006, 3008, 3016,
3026, 3037, 3041,
3050, 3064, 3067,
3075
JVC
3049
Kabel Deutschland
3043, 3073, 3074
Macab
3055
Magnavox
3029
Maspro
3049
Matsui
3049
MegaCable
3039
Memorex
3030, 3040
Minerva
3049
Mnet
3057
Motorola
3006, 3008, 3010,
3013, 3039, 3072,
3075
Movie Time
Mr Zapp
Multichoice
Multitech
NEC
NET Brazil
Nokia
Noos
NSC
Oak
Pace
Palladium
Panasonic
Paragon
Philips
3031, 3063
3055
3057
3045
3018
3007
3051
3055
3031
3024
3011, 3043, 3084
3049
3034, 3036, 3040
3040
3021, 3022, 3029,
3049, 3053, 3054,
3055
Pioneer
3012, 3032, 3038,
3042, 3048, 3083,
3084
Popular Mechanics
3044
Proscan
3015, 3016
Pulsar
3040
PVP Stereo Visual Matrix
3064
Quasar
3040
RadioShack
3041, 3045
RCA
3005, 3036, 3076,
3077
Realistic
3020
Recoton
3044
Regal
3028
Regency
3025
Rembrandt
3016
Runco
3040
Sagem
3055
Samsung
3011, 3023, 3032,
3042
SAT
3048
Scientific Atlanta 3003, 3004, 3011,
3012, 3013, 3062,
3078, 3079, 3080,
3081, 3082, 3083,
3084
Signal
3026, 3041
Signature
3016
Sony
3014, 3047
Sprucer
3036
Standard Component
3033
Starcom
3026, 3037, 3041,
3067
Stargate
3026, 3041
Starquest
3026, 3041
Supercable
3008
Supermax
3045
Tele+1
3057, 3061
Telepiu
3057
Thomson
3000, 3009
TIME WARNER 3006
Tocom
3017
Torx
3067
Toshiba
3040
Tristar
3045
Tudi
3052
Tusa
3026, 3041
TV86
3031
Unika
3019, 3020
United Cable 3037, 3064
Universal
3019, 3020
Universum
3049, 3051
V2
3045
Videoway
3065
View Star
3024, 3029, 3031
Viewmaster
Vision
Visiopass
Vortex View
Wittenberg
Zenith
Zentek
3045
3045
3051, 3054, 3055
3045
3048
3035, 3040, 3046
3044
Sattelite
AB Sat
AccessHD
ADB
AGS
Akai
Alba
4138, 4139
4058
4142
4138
4101, 4103
4083, 4084, 4085,
4086, 4108, 4139
Aldes
4085, 4087, 4088
Allsat
4098, 4101, 4103
Allsonic
4074, 4087, 4090
Alltech
4139
Alpha
4103
Alpha Digital 4058
Alphastar
4031
Amitronica
4139
Amstrad
4089, 4113, 4136,
4139
Anglo
4139
Ankaro
4074, 4087, 4090,
4139
Anttron
4083, 4086
Apollo
4083
Armstrong
4089, 4103
Artec
4054
Asat
4101, 4103
ASLF
4139
Astacom
4138
Astra
4089, 4091, 4100,
4137, 4139
Astro
4074, 4086, 4088,
4090, 4093, 4135,
4136, 4137
AudioTon
4086, 4098
Aurora
4140
Austar
4140
Axiel
4138
Axis
4074, 4090, 4091,
4096
Best
4074, 4090
Blaupunkt
4093
Blue Sky
4139
Boca
4089, 4100, 4105,
4139
Boston
4138
Brain Wave
4095
Broadcast
4094
Broco
4139
BSkyB
4113, 4123
BT
4138
Bubu Sat
4139
Bush
4084, 4127
Cambridge
4136
Canal Satellite 4135
Canal+
4135
CaptiveWorks 4049
Channel Master 4060, 4085
Chaparral
4025
CHEROKEE 4138
Chess
4134, 4139
CityCom
4084, 4133, 4137
Clatronic
4095
CNT
4088
Comag
4000, 4001, 4002,
4003, 4004
Commlink
4087
Comtech
4096
Condor
Connexions
Conrad
4074, 4090, 4137
4074, 4092
4074, 4133, 4136,
4137
Conrad Electronic 4137, 4139
Contec
4096
Coolsat
4050
Cosat
4098
Coship
4063
Crown
4089
Daeryung
4092
Daewoo
4107, 4139
DDC
4085
Delega
4085
Dew
4096
Diamond
4097
Digiality
4137
Digital Stream 4059
DIRECTV
4017, 4018, 4020,
4021, 4022, 4024,
4037, 4038, 4040,
4041, 4043, 4045,
4057, 4106, 4143,
4144, 4145, 4146,
4147, 4148, 4149,
4150, 4151, 4152,
4153, 4154, 4155,
4156, 4157
Discoverer
4134
Discovery
4138
Diseqc
4138
Dish Network 4011, 4012, 4013,
4014, 4019, 4039,
4064
Dishpro
4039, 4064
Distrisat
4103
Ditristrad
4098
DNT
4092, 4101, 4103
Drake
4026
DStv
4140
Dune
4074
Echostar
4011, 4019, 4039,
4064, 4092, 4139
Einhell
4083, 4087, 4089,
4136, 4139
Elap
4138, 4139
Elekta
4088
Elsat
4139
Elta
4074, 4083, 4090,
4098, 4101, 4103
Emanon
4083
Emme Esse
4074, 4090
Engel
4139
Ep Sat
4084
EURIEULT
4077
Eurodec
4102
Europa
4103, 4136, 4137
Europhon
4137
Eurosat
4089
Eurosky
4074, 4089, 4090,
4133, 4136, 4137
Eurostar
4089, 4133, 4137
Eutelsat
4139
Exator
4083, 4086
Expressvu
4039
Fenner
4074, 4134, 4139
Ferguson
4084, 4102, 4132
Fidelity
4136
Finlandia
4084
Finlux
4084
FinnSat
4096, 4102
Flair Mate
4139
Foxtel
4140
Freecom
4083, 4099, 4136
FTEmaximal 4074, 4139
Fuba
4074, 4083, 4090,
4092, 4093, 4101,
4133
Galaxis
4074, 4087, 4090,
4091, 4096, 4098,
4133, 4140
GE
4015, 4016, 4061,
4151
General Instrument
4027, 4065
GMI
4089
GOI
4039
Goldbox
4135
GoldStar
4099
Goodmans
4079, 4080, 4084
Goodmind
4061
Grandin
4077
Grothusen
4083, 4099
Grundig
4084, 4086, 4093,
4113, 4129, 4136,
4140
Hänsel & Gretel 4137
Hantor
4083, 4095
Hanuri
4088
Hauppauge
4126
Heliocom
4137
Helium
4137
Hinari
4085
Hirschmann
4074, 4093, 4128,
4136, 4137, 4138
Hisawa
4095
Hisense
4066
Hitachi
4032, 4084, 4149,
4153
Homecast
4005, 4006, 4007
Houston
4098
HTS
4039
Hughes
4018, 4022, 4144,
4146, 4150, 4152
Hughes Network Systems
4021
Humax
4051, 4075, 4076,
4110
Huth
4087, 4089, 4094,
4095, 4096, 4098,
4137, 4141
Hypson
4077
Ilo
4066
Imex
4077
Innovation
4090
Insignia
4057
Intertronic
4089
Intervision
4098, 4137
ITT Nokia
4084
Jerrold
4065
Johansson
4095
JOK
4138
JSR
4098
JVC
4011, 4019, 4039,
4079
Kamm
4139
Kathrein
4093, 4101, 4103,
4109, 4112, 4120,
4133, 4138, 4139
Kathrein Eurostar 4133
Klap
4138
Konig
4137
Kosmos
4099
KR
4086
Kreiselmeyer 4093
K-SAT
4139
Kyostar
4083
L&S Electronic 4074
Lasat
4074, 4088, 4090,
4100, 4133, 4134,
4137
Lasonic
4062
Lenco
4074, 4083, 4099,
4133, 4137, 4139
Leng
4095
Lennox
4098
Lenson
4136
Lexus
4103
LG
4053, 4057, 4099
Lifesat
4074, 4090, 4134,
4139
Lifetec
4090
Lorenzen
4137
Lorraine
4099
Lupus
4074, 4090
Luxor
4136
Lyonnaise
4102
Macab
4102
Magnavox
4045, 4055
Manata
4077, 4138, 4139
Manhattan
4084, 4088, 4098,
4138
Marantz
4101
Mascom
4088
Maspro
4084, 4139
Matsui
4138
Max
4137
Mediabox
4135
Mediamarkt
4089
Mediasat
4091, 4135, 4136
Medion
4074, 4090, 4139
Medison
4139
Mega
4101, 4103
Memorex
4045
Metronic
4077, 4078, 4083,
4086, 4087, 4088,
4139
Metz
4093
Micro electronic 4136, 4137, 4139
Micro Technology 4139
MicroGem
4056
Micromaxx
4074, 4090
Microstar
4090
Microtec
4139
Minerva
4093
Mitsubishi
4084, 4093, 4152
Mitsumi
4100
Morgan’s
4089, 4100, 4101,
4103, 4139
Motorola
4008, 4009, 4010,
4065
Multichoice
4140
Multitec
4134
Muratto
4099
Mysat
4139
Navex
4095
Neuhaus
4091, 4098, 4136,
4137, 4139
Neusat
4139
Next Level
4065
NextWave
4141
Nikko
4089, 4139
Nokia
4084, 4122
Nordmende
4083, 4084, 4085,
4088, 4102
Nova
4140
Novis
4095
Oceanic
4097
Octagon
4083, 4086, 4096
Okano
4089
Optex
4098
Optus
4135, 4140, 4141
ix
00_RX-V1065_B_cv.fm Page 1 Tuesday, May 12, 2009 3:00 PM
B
Orbitech
OSat
Otto Versand
Pace
Pacific
Packsat
Palcom
Palladium
Palsat
Panasat
Panasonic
Panda
Pansat
Patriot
Paysat
PCT
Philco
Philips
Phoenix
Phonotrend
Pioneer
Polsat
Predki
Premiere
Priesner
Primestar
Profile
Promax
Prosat
Proscan
Protek
Proton
Provision
Quadral
Quelle
Quiero
RadioShack
Radiola
Radix
Rainbow
RCA
Realistic
Redpoint
Redstar
4083, 4134, 4135,
4136
4086
4093
4084, 4093, 4113,
4121, 4125, 4138
4097
4138
4085
4089, 4136
4134, 4136
4140
4043, 4044, 4046,
4084, 4113, 4118,
4143, 4148
4084, 4137
4047
4138
4045
4060
4055
4021, 4022, 4045,
4084, 4101, 4103,
4111, 4115, 4135,
4138, 4150, 4152,
4153, 4155, 4156
4096
4084, 4087, 4098
4124, 4135
4102
4095
4098, 4135
4089
4030
4138
4084
4085, 4087
4015, 4016, 4040,
4151
4097
4066
4088
4074, 4085, 4087,
4090, 4138
4093, 4133, 4137
4102
4065
4101, 4103
4092, 4119
4086
4015, 4016, 4034,
4035, 4036, 4037,
4038, 4040, 4151,
4157
4028
4091
4074, 4090
RFT
Roadstar
Roch
Rover
Saba
4087, 4101, 4103
4139
4077
4074, 4139
4088, 4133, 4137,
4138
Sabre
4084
Sagem
4069, 4102
Sakura
4096
Samsung
4018, 4021, 4023,
4041, 4042, 4081,
4082, 4083, 4114,
4150, 4154
SAT
4085, 4136
Sat Cruiser
4141
Sat Partner
4083, 4086, 4088,
4095, 4099, 4136
Sat Team
4139
Satcom
4094, 4137
Satec
4139
Satelco
4074
Satford
4094
Satmaster
4094
Satplus
4134
Schneider
4090, 4134, 4138
Schwaiger
4097, 4134, 4137
SCS
4133
Seemann
4089, 4091, 4092
SEG
4074, 4083, 4090,
4095
Seleco
4098
Servi Sat
4077, 4139
Siemens
4093
Silva
4099
Skantin
4139
Skardin
4091
Skinsat
4136
SKR
4139
Skymaster
4067, 4068, 4087,
4134, 4139
Skymax
4101, 4103
SkySat
4134, 4136, 4137,
4139
Skyvision
4098
SM Electronic 4134, 4139
Smart
4133, 4139
Sony
4017, 4020, 4135
SR
4089, 4100
Star Choice
4065
Starland
4139
Starring
4095
Start Trak
4083
Strong
4074, 4083, 4086,
4090, 4099, 4140
STS
4033
STVI
4077
Sumida
4089
Sunny Sound
Sunsat
Sunstar
Supermax
Tandberg
Tandy
Tantec
TCM
Techniland
TechniSat
Technology
Technosat
Technowelt
Teco
Telanor
Telasat
Telecom
Telefunken
Teleka
Telemaster
Telesat
Telestar
Televes
Telewire
Tempo
Tevion
Thomson
Thorens
Thorn
Tivax
Tivo
Tokai
Tonna
Toshiba
Triad
Triasat
Triax
Turnsat
Tvonics
Twinner
UEC
Uher
UltimateTV
Uniden
Unisat
Unitor
Universum
US Digital
4074
4139
4074, 4089, 4100
4141
4102
4086
4084
4090
4094
4071, 4072, 4073,
4092, 4103, 4116,
4117, 4134, 4135,
4136
4140
4141
4137
4089, 4100
4085
4133, 4137
4139
4067, 4083, 4138
4086, 4089, 4092,
4136, 4137
4088
4137
4134, 4135, 4136
4084, 4136
4098
4141
4090, 4139
4070, 4084, 4102,
4104, 4130, 4133,
4135, 4137, 4138,
4139
4097
4084
4058
4150
4103
4084, 4094, 4098,
4136, 4139
4144, 4152, 4153
4099
4136
4093, 4133, 4136,
4139
4139
4132
4077, 4139
4140
4134
4020
4029, 4045
4089, 4096, 4103
4095
4093, 4133, 4137
4066
Variosat
Vega
Ventana
Viewsat
Visiosat
Voom
Vortec
Welltech
WeTeKom
Wevasat
Wewa
Winersat
Wisi
Woorisat
Worldsat
Xrypton
XSat
Zehnder
Zenith
Zodiac
4093
4074
4101, 4103
4048
4095, 4098, 4138,
4139
4065
4083
4134
4134, 4136
4084
4084
4095
4084, 4092, 4093,
4136, 4137
4088
4138
4074
4139
4074, 4088, 4090,
4131, 4133
4052, 4057, 4145
4086
CD
Yamaha
RX-V1065
AV Receiver
5000, 5013
CD Recoder
Yamaha
5001
MD
Yamaha
5002, 5003, 5004
Tape
Yamaha
5005, 5006
Tuner
Yamaha
5007, 5008, 5009,
5010, 5014, 5015,
5016, 5017, 5018
USB
Yamaha
5012, 5021
DOCK
Yamaha
5011, 5022
LD
Yamaha
2002
OWNER’S MANUAL
© 2009 Yamaha Corporation All rights reserved.
Black process 45.0° 240.0 LPI
Printed in Malaysia
WQ94970
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement