plumbing - K-MAC Enterprises

plumbing - K-MAC Enterprises
PLUMBING
A
Arrestors, Water............................................544
Automatic Faucet Controls...............................494
B
Baskets
Pre-rinse...................................................482
Sink.........................................................487
Beer
Faucets....................................................537
Tap Lock..................................................537
Tower......................................................537
C
Cartridges
Replacement Filter............................. 553–562
Fountain System............................... 558, 560
Clamps.........................................................552
Clean-out Bodies............................................486
Compound, Pipe Joint....................................549
Cover, Pipe...................................................503
Cylinder, Foot Valve.......................................548
D
Dipperwells and Accessories.................. 534, 536
Disconnects, Slotted-type.................................536
Disposers
Garbage..................................................483
Strainer....................................................483
Drains
Assemblies...............................................481
Baskets (Sink)................................... 480–481
Blaster®. ..................................................549
Flat Strainer..............................................480
Funnels....................................................482
Grate (Floor)..................................... 484–485
Lock Nuts.................................................481
Spin and Seal...........................................480
Stoppers..................................................481
Strainers (Floor)............................... 485, 487
Tailpieces.................................................476
Trays.......................................................541
Uncloggers...............................................549
Washers..................................................481
Drip Pan Strips..................................... 487, 536
E
Emergency Eye Wash Stations.........................494
F
Drinking Fountain......................................540
Glass Filler and Accessories............... 542–543
Inlet.........................................................502
Lab Sink...................................................493
Lavatory........................................... 496–497
Multi-purpose............................................488
Pantry......................................................498
Pot Filler & Kettle.......................................499
Service Sink.............................................492
Specialty......................................... 502, 540
Steam Jacketed Kettle................................502
Steam Table..............................................502
Stock Pot..................................................502
Tomlinson......................................... 538–539
Wall Mount..............................490–491, 495
Wok Range..............................................501
Fillers, Pot and Kettle......................................499
Filters, Water......................................... 553–562
Floor Drain Grate Hinged...............................484
Floor
Drains......................................................487
Sink Baskets.............................................487
Sinks.......................................................486
Fountain Draft Arms.......................................537
G
Garbage Disposers........................................483
Gauge Glass and Parts..................................540
Glass Fillers and Accessories.................. 542–543
Grease Interceptors........................................483
H
Hand/Nail Cleaning System...........................493
Hand Sink.....................................................493
Handles, Toilet Flush.......................................546
Hose
Carrier/Holder.........................................550
Clamps....................................................552
Rack........................................................550
Reels.......................................................520
Spray Nozzles.................................. 550–551
Hoses...........................................................551
O
Overflow
Head and Elbow.............................. 474, 476
Tubes.............................................. 482, 534
Oil/Grease Absorbent...................................485
P
Pipe Cover, Pro-Extreme™...............................503
Pipe Joint Compound.....................................549
Plungers........................................................549
Pre-rinse
Baskets....................................................482
Parts................................................ 521–533
Pre-rinses
Deck Mount...................................... 516–517
Wall Mount...................................... 518–519
Putty.............................................................549
R
Reducer........................................................576
S
Scale Removers, Scale Kleen™........................561
Scale Sticks™................................................556
Screwdriver...................................................484
Sink
Baskets/Strainers.............................. 480–481
Hand.......................................................493
Stoppers..................................................481
Sloan Valves and Parts........................... 546–547
Spray Nozzles....................................... 550–551
Stoppers.......................................................481
Strainers
Floor Drain...................................... 485, 487
Garbage Disposer....................................483
In-line......................................................561
T
Tailpiece Assemblies.......................................476
Teflon® Tape/Packing.....................................550
Thermostatic Mixing Valves.................... 494, 544
Toilet Flapper.................................................546
Tomlinson Faucets and Parts.................... 538–539
Trap Primer...................................................544
Trays, Drain..................................................541
Tubes, Overflow................................... 482, 534
Tubing
Fittings.....................................................552
Vinyl........................................................552
U
Utility Sprays.................................................520
V
Vacuum Breakers...........................................492
Valves................................................... 544–545
Valve, Water Control......................................502
W
Waste
Lever/Twist....................... 474–475, 478–479
Repair Kits ..............................................476
Tool, Lever/Twist.......................................476
Wastes and Parts................................... 474–479
Water
Filters............................................... 553–562
Stations....................................................541
PLUMBING
PLUMBING
Faucet Parts........................................... 503–514
Faucets
Automatic.................................................494
Beer........................................................537
Deck Mount..............................489, 496–498
Dipperwell...................................... 534, 536
Double-jointed..........................................500
Attention California and Vermont Residents:
Effective January 1, 2010, only plumbing products that comply with California or
Vermont laws may be sold into those states.
We carry a full line of compliant products. Please call us to discuss your specific needs.
Phone: 800-257-7737
24-Hour Fax: 800-255-9866
473
PLUMBING
Franklin Machine Products Wastes
This convenient universal body provides both 11⁄2" NPS female and 2" NPS male drain outlet connections.
Can instantly convert to an overflow assembly, eliminating double inventories.
Wastes
•31⁄2" sink opening with 43⁄8" flange
•2" NPS male connection and 11⁄2" NPS
female connection
•Can be used with or without 11⁄4" overflow
head and elbow
•Stainless steel drain, flange, and handle
•Nickel-plated die-cast body
1
1. No. 100-2005 Twist waste
2. No. 100-2006 Lever waste
2
Are you
LOST?
Overflow Head and Elbow
3
•Designed to fit lever and twist wastes with
11⁄4" overflow outlets
•Easy to cut to size
3. No. 100-1024 Overflow head
4. No. 100-1021 Overflow elbow: 11⁄4" x 14" x 18"
4
Each section begins
with its own index.
PLUMBING
Also, using the
directory in the front
or one of our
cross-references in the
back should help you
find what you need.
474
fmponline.com
PLUMBING
Franklin Machine Products Wastes
Lever Wastes
•Stainless steel strainer, flange, and handle
•Nickel-plated bronze body
ITEM No.
100-1000
100-1034
100-1012
100-1035
SINK
DRAIN
OPENING OUTLET
3" 3" 31⁄2" 31⁄2" FLANGE
DIA.
11⁄2" NPS
2" NPS 11⁄2" NPS
2" NPS 41⁄8"
41⁄8"
43⁄8"
43⁄8"
Lever Wastes with
11⁄4" Overflow Outlet
•Stainless steel strainer, flange, and handle
•Nickel-plated bronze body
ITEM No.
100-1017
100-1036
100-1018
100-1037
SINK
DRAIN
OPENING OUTLET
3" 3" 31⁄2"
31⁄2"
FLANGE
DIA.
11⁄2" NPS
2" NPS
11⁄2" NPS
2" NPS
41⁄8"
41⁄8"
43⁄8"
43⁄8"
Twist Wastes
•Stainless steel strainer, flange, and handle
•Nickel-plated bronze body
ITEM No.
100-1026 100-1038
100-1031
100-1039
SINK
DRAIN
OPENING OUTLET
3"
3"
31⁄2"
31⁄2"
FLANGE
DIA.
11⁄2" NPS
2" NPS
11⁄2" NPS
2" NPS
41⁄8"
41⁄8"
43⁄8"
43⁄8"
Twist Wastes with
11⁄4" Overflow Outlet
• Stainless steel strainer, flange, and handle
• Nickel-plated bronze body
100-1032
100-1040
100-1033
100-1041
SINK
DRAIN
OPENING OUTLET
3"
3"
31⁄2" 31⁄2" 11⁄2" NPS
2" NPS
11⁄2" NPS
2" NPS
FLANGE
DIA.
PLUMBING
PLUMBING
ITEM No.
41⁄8"
41⁄8"
43⁄8"
43⁄8"
Phone: 800-257-7737
24-Hour Fax: 800-255-9866
475
PLUMBING
Parts & accessories for Wastes
Reducer
Eliminates stocking 2 sizes of lever
wastes.
No. 100-1042
•2" NPT female x 11⁄2" NPT male
•Nickel-plated brass
Tailpiece Assemblies
•Includes coupling nut and washer
Overflow Head and Elbow
ITEM No.
•Designed to fit lever and twist wastes with
11⁄4" overflow outlets
•Easy to cut to size
FITS
DRAIN SIZE
HEIGHT
1" NPS
11⁄2" NPS
2"NPS
2"
4"
4"
Brass
102-1074
102-1076
102-1078
1
1. No. 100-1024 Overflow head
2. No. 100-1021 Overflow elbow: 11⁄4" x 14" x 18"
2
Nickel-Plated Brass
102-1075
102-1077
102-1079
1" NPS
11⁄2" NPS
2" NPS
2"
4"
4"
Waste Repair Kit
Contains common replacement parts for all
Franklin Machine Products, Barnett Premier,
Chicago, Component Hardware Group,
Standard Keil, and T&S Brass wastes.
No. 100-1011
PLUMBING
•Kit includes:One of each: 3" and 31⁄2" flange washers,
Body bushing,
Packing nut bushing,
Plunger O-ring,
Coupling nut washer,
Handle O-ring,
Twist handle snap rings,
Washer
Note: Cannot be used on old style 3976 and 3979
series lever wastes (see No. 100-1050).
476
Waste Repair Kit for Old
Style Lever Wastes
Contains common replacement parts for
Franklin Machine Products old style 3976
and 3979 series lever wastes.
No. 100-1050
•Kit includes: One of each: flange washer,
Coupling nut washer,
Body bushing,
Packing nut bushing,
O-ring
Lever/Twist
Waste Tool
Heavy-duty tool for removing or installing
lever and twist wastes with 23⁄4" or 31⁄8" slots.
Works for both 3" and 31⁄2" sink openings.
No. 142-1113
•Stainless steel
Note: Cannot be used on T&S Brass twist
and lever wastes.
fmponline.com
PLUMBING
Parts for Lever & Twist Handle Wastes
Parts for Wastes
Parts for Lever and Twist Handle
Wastes
REF
No. ITEM No. DESCRIPTION
1
2
2
3
3
4
4
5
6
7
8
9
10
11
12
13 14
15
16
17
18
19
20
21
22
23
24
24
100-1014 Crumb cup strainer: 3 ⁄2" sink opening only
100-1010 Flange assembly: 3" sink opening, 41⁄8" OD
100-1016 Flange assembly: 31⁄2" sink opening, 43⁄8" OD
100-1005 Strainer: 3" sink opening, 31⁄8" diameter
100-1013 Strainer: 31⁄2" sink opening, 3 7⁄16" diameter
100-1006 Washer: 3" sink opening
100-1015 Washer: 31⁄2" sink opening
100-1004 Plunger with O-ring
100-1002 O-ring
100-1007 Lever rod
100-1009 Body bushing
100-1001 Packing nut bushing
100-1008 Packing nut
100-1003 Plastic handle knob
100-1027 Twist handle
100-1028 O-ring
100-1030 Washer
100-1029 Snap ring
100-1024 Overflow head assembly
102-1026 Overflow washer
102-1021 Overflow flanged lock nut
100-1023 Overflow strainer
100-1025 Strainer mounting screw
100-1019 Coupling nut washer
100-1020 Coupling nut
100-1021 Overflow elbow: 11⁄4" OD x 14" x 18"
100-1053 Strainer lock for 3" waste (strainer not included)
100-1054 Strainer lock for 31⁄2" waste (strainer not included)
For use on Franklin Machine Products,
Component Hardware Group,
and Standard Keil wastes.
1
16
1
3
24
20
17
3
2
19
18
4
21
5
22
7
6
9
8
23
22
10
11
21
14
13
15
12
Parts for Old Style Franklin
Machine Products Lever Wastes
Models 3976, 3979
33
REF
No. ITEM No. DESCRIPTION
100-1046 Flat strainer: 31⁄4" diameter
100-1006 Flange washer
100-1045 Plunger only
100-1044 O-ring
100-1047 Lever rod with ball
100-1049 Body bushing
100-1043 Packing nut bushing
100-1048 Packing nut
100-1024*Overflow head assembly
100-1019 Coupling nut washer
100-1020 Coupling nut
100-1021 Overflow elbow: 11⁄4" OD x 14" x 18"
25
26
27
36
35
34
28
31
PLUMBING
PLUMBING
25
26
27
28
29
30
31
32
33
34
35
36
29
*Overflow head pictured is a replacement for the original.
30
Phone: 800-257-7737
24-Hour Fax: 800-255-9866
32
477
PLUMBING
twist flow™ rotary wastes
twist flow™ rotary wastes
1
ULTRA
PRO
•Ideal for 3 compartment pot and soak sinks
•Stainless steel crumb cup locks into place
•Heavy-duty rotary handle
•Teflon® seals for efficiency
•31⁄2" to 4" sink opening with 43⁄8" flange
•2" NPS external connection, 11⁄2" NPT
internal connection
•Can be used with or without 11⁄4" overflow
head and elbow
1. No. 100-2000 316 stainless steel
2. No. 100-2002 Nickel-plated brass
Replacement Sink Baskets
• Fits 31⁄2" sink opening
No. 100-2003 300 series stainless steel
No. 102-1129 Tamperproof twist-lock
ULTRA
2
PRO
Replacement Handles are available. Call for details.
twist flow™ rotary waste
Economical Plastic Rotary Waste
ULTRA
PRO
No. 100-2001
•Crumb cup locks into place
•12" rotary handle
•Fits standard 31⁄2" sink opening
•2" NPS external connection
•Solid plastic
Replacement Sink Basket
No. 100-2003 300 series stainless steel
PLUMBING
Overflow Kit and Replacement Handle are
available. Call for details.
478
fmponline.com
PLUMBING
Drain King twist wastes
by fisher
TWIST WASTEs
•“Clear Through” opening—no need to disassemble
if snaking is required
• 1⁄4 turn fully opens and closes valve
•Fits 31⁄2" sink openings
•Supplied with alternate slip joint nut and washer
•2" NPT male and 11⁄2" female outlet
•Cast red brass
•Stainless steel ball and flat strainer
•Dual Teflon® seals
No. 112-1038 11⁄2" overflow outlet
•Fisher no. 22438
No. 112-1040 Without overflow outlet
(not shown)
• Fisher no. 22209
–
–
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
113-1110
113-1104
113-1106
113-1101
113-1109
113-1108
113-1100
113-1070
113-1099
113-1097
113-1098
113-1102
113-1077
113-1103
113-1092
113-1093
113-1094
113-1095
113-1096
113-1105
113-1107
DESCRIPTION
End cap (not shown)
End cap gasket (not shown)
Basket strainer
Flat strainer
Vandal resistant screw
Vandal resistant bar
Clamping ring
Clamping ring gasket
Waste valve retaining nut
Teflon® seal
Waste ball valve
Screw
Lever handle
Vandal resistant knob
Rotor nut
Washer
Rotor arm
O-ring
Rotor stop
Slip joint washer
19
Slip joint nut
parts for Old style Rotary
twist wastes by Fisher
REF
No. ITEM No.
20
21
22
23
24
25
26
27
28
29
113-1072
113-1067
113-1070
113-1078
113-1077
113-1079
113-1068
113-1071
113-1069
113-1066
4
2
DESCRIPTION
Strainer
Flange
Washer
Handle screw
Handle only
Handle nut
Rotor and O-ring
O-ring
Washer
Nut
Phone: 800-257-7737
5
6
7
8
12
9
10
11
8
17
18
20
16
15
14
13
23
24
21
22
25
26
27
24-Hour Fax: 800-255-9866
PLUMBING
PLUMBING
REF
No. ITEM No.
3
1
parts for Drain king
twist wastes
28 29
479
PLUMBING
drains & Sink Baskets
Flat Strainer Drain
Free Flow Drain
heavy-duty waste style drain
No. 102-1068
No. 102-1096
•Fits 3", 31⁄2" or 4" sink openings
•11⁄2" NPS outlet
•43⁄8" top diameter
•2" high
•Stainless steel
•Fits 31⁄2" sink opening
•2" NPS
•41⁄2" top diameter
•23⁄8" high
•Cast brass with stainless steel top
No. 100-1056
•Fits 3" sink opening
•2" NPS outlet
•Nickel-plated bronze body
•Stainless steel strainer and flange
• Stainless steel threaded
clean-out plug
1
Spin and Seal Drain
Basket Sink Drains
Sink basket screws into drain, providing a better
seal when closed and better straining when open.
•Fits 31⁄2" sink opening
•11⁄2" NPS outlet
•41⁄2" top diameter
•Drain body and sink basket are
stainless steel
No. 102-1067
•Fits 31⁄2" sink opening
•11⁄2" NPS outlet
•41⁄2" top diameter
•Stainless steel
No. 102-1113 Replacement sink
basket
No. 102-1097 Stainless steel
No. 102-1064 300 series
stainless steel
2
Universal Replacement
Sink Baskets
•Fits most 31⁄2" basket sink drains
•Stainless steel
PLUMBING
1. No. 102-1062 With movable metal post
2. No. 102-1063 With fixed plastic post
480
fmponline.com
PLUMBING
Heavy Cast Drain Assemblies
•Includes lock nut and washer
ITEM
No.
A
BC
DRAIN SIZE FLANGE LENGTH
1. Brass
102-1000
102-1004
102-1007
102-1009
102-1011
102-1014
⁄2"
1"
1"
1"
11⁄2"
11⁄2"
11⁄8"
2" 2" 2" 3" 3" 2"
11⁄2"
31⁄4"
4"
11⁄2"
3"
1. Nickel-Plated Brass
1
102-1001
⁄2" NPS
3
⁄4" NPS
102-1003*
102-1005
1" NPS
102-1008
1" NPS
102-1010
1" NPS
102-1012
11⁄2" NPS
102-1015
11⁄2" NPS
102-1017
2" NPS
1 ⁄8"
11⁄2" 2" 2" 2"
3"
3" 33⁄8" 2"
13⁄4"
11⁄2"
31⁄4"
4"
11⁄2"
3"
2"
2. Stainless Steel
102-1065
11⁄2" NPS
27⁄8"
15⁄16"
1
NPS
NPS
NPS
NPS
NPS
NPS
1
B
1
C
A
"A" dimension is referred to
as drain size.
Actual OD is approximately
1
⁄4" larger.
2
* Lock nut and washer not included
Drain LOCK NUTS
ITEM No.
FITS
DRAIN SIZEMATERIAL
102-1039
102-1040
102-1041
102-1043
102-1044
102-1045
102-1047
1" NPS
1" NPS
1" NPS
11⁄4" NPS
11⁄2" NPS
11⁄2" NPS
11⁄2" to 2" NPS
Rubber
Brass
Nickel-plated brass
Rubber
Rubber
Nickel-plated brass
Rubber
102-1018 1⁄2" NPS
102-1019 3⁄4" NPS
102-1020 1" NPS
102-1021 11⁄2" NPS
102-1022 2" NPS
Drain WASHERS
No.
No.
No.
No.
No.
102-1023
102-1115
102-1025
102-1026
102-1027
⁄2" NPS
⁄4" NPS
1" NPS
11⁄2" NPS
2" NPS
1
3
Replacement sink basket
sink basket
DRAIN AND BASKET
No. 102-1028
No. 102-1066
No. 102-1130
•Fits drains with 13⁄4" inside diameter
•Stainless steel
•Rubber seat material
•
•
•
•
⁄4"
•Fits 1 NPS drains
•11⁄4" OD x 3⁄4" D
•Stainless steel
1
PLUMBING
PLUMBING
Stoppers
No.
No.
No.
No.
No.
Fits 17⁄8" sink opening
11⁄2" NPS
213⁄16" top diameter
Stainless steel
No. 102-1066 Replacement sink basket
Phone: 800-257-7737
24-Hour Fax: 800-255-9866
481
PLUMBING
PRE-RINSE BASKETs
• Fits standard 20" x 20"
(508mm x 508mm) pre-rinse sink
• Stainless steel
No. 102-1125 21⁄4" (57mm) deep
No. 102-1151 4" (102mm) deep
4
2
1
5
3
Overflow Tubes
PLUMBING
•Durable
•Fits drains with 1" ID
•Rubber seat
ITEM No.MATERIAL
1. 102-1030
2. 102-1031
2. 102-1032
3. 102-1072*
Plastic
Nickel-plated brass
Nickel-plated brass
Nickel-plated brass
*Fits drains with 13⁄4" inside diameter
482
HEIGHT
71⁄2"
71⁄2"
9"
12"
Specialty Overflow Tubes
Drain FunnelS
With strainerS
Unique dual rubber seals provide a positive seal
when placed in a drain. Extra-wide top seal
stabilizes the tube. Durable white plastic.
•Strainer prevents waste from clogging drain
•Funnel helps keep rinse water clean
No. 102-1070 Fits drains with 1" to 11⁄8" ID
•71⁄2" high
No. 102-1071 Fits drains with 1 ⁄2" to 1 ⁄4" ID
•10" high
1
3
4. No. 102-1116 Aluminum
•7" across top x 6" high
5. No. 102-1069 Plastic
•7" across top x 8" high
fmponline.com
PLUMBING
Grease Traps
Grease Interceptors by Dormont®
Minimize plumbing repairs by eliminating product build-up in your pipes. Interceptors
trap greasy substances and prevent them from entering plumbing systems.
•External cast iron flow restrictor
•Removable baffle assembly
•PDI certified
•Steel cover with gasket
•Epoxy-coated steel housing
Item No.
Grease
Capacity
Flow
Rate
Description
Dormont No.
400-5014
40 lb
20 GPM
24" L x 15 ⁄4" W x 15" H
WD20
400-5015
50 lb
25 GPM
400-5016
70 lb
35 GPM
3
(610mm x 400mm x 381mm)
26" L x 161⁄2" W x 161⁄2" H WD25
(660mm x 419mm x 419mm)
30" L x 18" W x 19" H
(762mm x 457mm x 483mm)
WD35
Garbage DISPOSERS
Built to work in the toughest foodservice environments. Sealed shafts prevent motor damage,
non-corrosive parts virtually eliminate chance of sudden breakdown, and oversized grinding tables
improve speed and reduce motor strain for faster, more efficient grinding.
1
W YEAR
ARR ANT
Y
Busboy® Garbage DISPOSERS by nemco®
No. 400-1021 For intermediate volume operations
• 120/240 volt
• Single phase
• 1 horsepower
No. 400-1022 For large volume operations
• 208-220/440 volt
• 3 phase
• 2 horsepower
No. 400-1023 For large volume operations with heavy loads
• 208-220/440 volt
• 3 phase
• 3 horsepower
TRAP-SAK GREASE TRAP
TREATMENTS
GARBAGE DISPOSER STRAINER
No. 102-1134
• Prevents unwanted items from passing through
while allowing liquid to flow
• Fits 18" diameter cone opening
• Includes 4 feet for stabilization
• Black plastic
Phone: 800-257-7737
24-Hour Fax: 800-255-9866
This treatment dissolves slowly while continuously
releasing fat and food digesting Roe-Tech Bacteria to
help degrade food residue. It’s safe for all plumbing,
and ends back-ups and overflows.
•Contains surfactant and odor neutralizing
fragrance
•Reduces FOG (Fats, Oil, and Grease)
No. 143-1105 2 lb (1kg)
No. 143-1106 5 lb (2.3kg)
483
PLUMBING
PLUMBING
A Proud NAFEM
Member For
Over 25 Years.
PLUMBING
HINGED floor drain GRATES
Eliminate the cost and danger associated
with loose or missing floor drain grates.
FRANKLIN HINGED FLOOR DRAIN
GRATEs™ for Smith Floor Drains
Unique hinged design allows for easy access drain cleaning.
Tamperproof screws prevent grates from being removed and
misplaced.
Round Drains
•Reinforced 5⁄32" nickel-bronze for added strength and durability
•Includes 1 tamperproof screw and 1 Phillips head screw
ITEM
No.
DRAIN
SIZE
102-1152
102-1153
5" 6"
OUTSIDE SCREW
DIA.CTRS.
45⁄8"
53⁄8"
4"
411⁄32"
Replacement Parts
•Pack of 25
No. 623-1014 Phillips head screws
No. 623-1015 Tamperproof screws
Square Drain
No. 102-1135
•73⁄8" square
•Reinforced 1⁄4" nickel-bronze for added strength and durability
•Includes 2 tamperproof screws and 2 Phillips head screws
Replacement Parts
•Pack of 25
No. 623-1014 Phillips head screws
No. 623-1015 Tamperproof screws
PLUMBING
tamperproof torx®
screwDriver
No. 142-1522
•For use with FMP hinged floor drain grates
•Fits size T-20 screws with tamperproof heads
•Non-removable tip
484
fmponline.com
PLUMBING
Floor drain Grates & strainers
GRATEs for Smith
Floor Drains
Floor Drain Strainer
with Deep Lip
No. 102-1119
•Acts as a secondary drain basket, under
the floor sink basket, or in the floor sink
drain opening
•13⁄8" high x 31⁄2" diameter
•Plastic
•Includes brass screws
•Brass
DRAIN
ITEM No.
SIZE
102-1080
102-1081
102-1082
102-1083
5" 6"
7"
8"
OUTSIDE SCREW
DIA.CTRS.
45⁄8"
51⁄2"
67⁄16"
77⁄16"
37⁄8"
415⁄16"
5"
61⁄16"
No. 102-1106 Replacement screw
FLOOR Drain Strainers
Floor Drain Strainers
•Used to capture solid particles, allowing waste
water to pass through
•Disposable
•9" (229mm) long
•Perforated nylon bag with plastic ring
Molded, durable strainer captures scraps and
waste. Eliminates flooded floors and foul odors.
•Can be used in drains with regular and
hinged grates
•Plastic
1 No. 102-1155 8" L x 3" OD
2 No. 102-1156 8" L x 4" OD
(203mm x 76mm)
(203mm x 102mm)
No. 102-1136 Yellow
•For 4" (102mm) drains
No. 102-1137 White
•For 6" (152mm) drains
1
2
Dome Dish
Floor Drain Strainers
No. 102-1138
•Used with floor drain strainers (Nos. 102-1136
and 102-1137)
•Captures oil and grease before they enter pipes
•Contains 9 dry qt (10L)
•Biodegradable and non-toxic
•100% natural cellulose
Phone: 800-257-7737
No.
No.
No.
No.
No.
No.
No.
No.
102-1140
102-1141
102-1142
102-1143
102-1144
102-1145
102-1146
102-1147
PLUMBING
PLUMBING
Oil/Grease Absorbent
•Tapered at the bottom to drop into standard
floor sinks
•Dome shape keeps drain flowing evenly
when strainer is partially full
•2" (51mm) deep
•Large holes for fast draining
•Heavy-duty plastic
6" (152mm) square
61⁄2" (165mm) square
7" (178mm) square
8" (203mm) square
81⁄2" (216mm) square
61⁄2" (165mm) round
81⁄2" (216mm) round
93⁄4" (248mm) round
24-Hour Fax: 800-255-9866
485
PLUMBING
Adjustable Clean-Outs
by Zurn®
ADJUSTABLE CLEAN-OUT BODY
No. 117-1282
•Fits over 4" (102mm) DWV pipe
•53⁄16" (132mm) OD cover
•Cover height adjustable from 7⁄8" to
13⁄4" (22mm to 44mm)
•Nickel bronze cover and a PVC body
•Zurn no. C02450PV4
ADJUSTABLE CLEAN-OUT BODY
No. 117-1281
•Fits over 3" (76mm) or inside 4" (102mm)
DWV pipe
•53⁄16" (132mm) OD cover
•Cover height adjustable from 7⁄8" to
13⁄4" (22mm to 44mm)
•Nickel bronze cover with a PVC body
•Zurn no. C02450PV3
HALF GRATE FLOOR SINK
No. 117-1279
•For 3" (76mm) DWV pipe connection
•Fit 85⁄8" square x 6" deep (219mm x 152mm)
floor opening
•Includes 87⁄8" (225mm) square half grate and
an anti-splash dome strainer
•White acid resistant enamel coating
•Zurn no. FD2375-3NH-H
CLEAN-OUT BODY
No. 117-1280
•Fits over 3" (76mm) or inside 4" (102mm)
DWV pipe
•Features a plug with a brass threaded insert
•Plastic
•Zurn no. C02413PVC
ACCESSORIES
No. 117-1283 Clean-out cover
•Zurn no. C02530SS5
ADJUSTABLE FLOOR DRAIN
PLUMBING
486
Designed for foot traffic and light-duty applications.
FULL GRATE FLOOR SINK
No. 117-1277
No. 117-1278
•Fits over a 3" (76mm) or inside a 4" (102mm)
DWV pipe
•Nickel head height is adjustable from 1" to
11⁄2" (25mm to 38mm)
•PVC body and heel proof grate
•Zurn no. FD2211PVC
•For 3" (76mm) DWV pipe connection
•Fits 85⁄8" square x 6" deep (219mm x 152mm)
floor opening
•Includes 87⁄8" (225mm) square full grate and an
anti-splash dome strainer
•White acid resistant enamel coating
•Zurn no. FD2375-3NH-F
fmponline.com
PLUMBING
floor drain GRATES, strainers & sink baskets
DOME STRAINER
FLOOR SINK BASKETs
•Fits into the bottom of a standard floor sink
•Removable for cleaning
•Dishwasher safe
•Plastic
No. 102-1127 61⁄2" x 61⁄2" x 3" H
No. 102-1114 81⁄2" x 81⁄2" x 21⁄2" H
FLOOR DRAIN
STRAINER WITH LIP
No. 102-1124
• Used in floor drains
• 51⁄2" OD (140mm), 21⁄4" H
• Aluminum
(57mm)
•Fits the bottom of floor sinks
•53⁄4" x 53⁄4" with 3⁄4" high lip
•Stainless steel
bar/FLOOR SINK
BASKET with flange
Floor Drain
Strainers with Lip
No. 102-1118
•Fit the bottom of floor sinks
•73⁄4" x 73⁄4" with 3⁄4" high lip
•Fits into the bottom of a standard floor sink
•Also fits across the opening of a standard bar
sink to catch waste while liquid flows into sink
•Removable for cleaning
•Dishwasher safe
•12" x 12" x 4" H overall dimensions
81⁄2" x 81⁄2" basket dimensions
•Plastic
No. 102-1148
No. 102-1109 Aluminum
No. 102-1108 Stainless steel
Floor Drain
Strainer With
Deep Lip
No. 102-1154
•Fits the bottom of floor sinks
•73⁄4" x 73⁄4" with 4" high lip
•Stainless steel
Say good-bye to foul odors with these deodorizing
and disinfecting strips. They control odors from
mildew, fungi, algae, and slime. They even reduce
the presence of fruit flies. Last up to 3 weeks!
No. 102-1158
Economy
Flat Floor Drain Strainer
Floor Drain Strainer with
Deep Lip
No. 102-1107
No. 102-1110
•Fits the bottom of floor sinks
•73⁄4" x 73⁄4"
•Stainless steel
•Fits the bottom of floor sinks
•73⁄4" x 73⁄4" with 2" high lip
•Stainless steel
Phone: 800-257-7737
24-Hour Fax: 800-255-9866
•Used in beer tap and soda dispenser drip pans,
and floor drains
•Can also be used in other areas, such as
refrigerator drain pans and urinals
•Helps prevent drain overflows
•5" x 11⁄2" x 1⁄2" (127mm x 38mm x 13mm)
•Controlled release
•Pack of 10
487
PLUMBING
PLUMBING
SANI-TAP GERMICIDAL
DRIP PAN STRIPS
PLUMBING
Multi-purpose Faucets
by Zurn®
SERVICE SINK FAUCET
GOOSENECK FAUCET
METERING LAVATORY FAUCET
No. 117-1310
No. 117-1309
No. 117-1312
•Wall mount
•Vacuum breaker spout
•8" adjustable centers
•1⁄2" NPT female inlet
•6" spout with hose thread and pail hook
•Ceramic disk cartridges
•Chrome-plated rough brass
•Zurn no. Z843M1RC
•Deck mount
•4" centers
•1⁄2" NPS x 21⁄4" shanks
•1⁄2" inlet adaptor nuts
•2.2 GPM aerator
•Ceramic disk cartridges
•Chrome-plated brass
•Zurn no. Z812A1
•Deck mount
•4" centers
•1⁄2" NPS x 21⁄4" shanks
•Includes inlet adaptor nuts
•1 GPM aerator
•Internal in-line filter
•Slow closing
•Adjustable cycle time
•Chrome-plated brass
•Zurn no. Z86500
1
AQUASPEC®
E-Z SENSOR
FAUCETS
2
For a hands-free sanitary operation.
PLUMBING
•Deck mount
•1⁄2" NPS shank
•Automatic 30-second time-out
•Internal in-line filter
•Low battery indicator light
•1.5 GPM vandal resistant aerator
•Includes 4 AA batteries
•Polished chrome-plated cast brass body
1. No. 117-1318
•Replaces 4" center faucet
•Zurn no. Z6915MT
2. No. 117-1317
•Includes 4" cover plate
•Zurn no. Z6912MT-CP4
488
AQUASPEC®
METERING FAUCET
CARTRIDGES
No. 117-1311
•Deck mount
•4" centers
•1⁄2" NPS x 21⁄4" shanks
•Includes inlet adaptor nuts
•1 GPM aerator
•Slow closing
•Adjustable cycle time with manual hot and
cold adjustment
•Chrome-plated brass
•Zurn no. Z86000
•For quarter-turn faucets (Nos. 117-1309,
117-1310)
•Includes 1 each of hot and cold cartridge
•Ceramic disk
No. 117-1314 Short stem
•13⁄16" length
•Zurn no. G67771
No. 117-1315 Long stem
•19⁄16" length
•Zurn no. G67772
Many items on this page are available
Lead-free Compliant.
Ask us about the item you need.
fmponline.com
PLUMBING
8" Center Deck mount faucets
Commercial-Duty Faucets
•1⁄2" NPS x 15⁄8" shanks
•1⁄2" slip fitting
•Chrome-plated brass shell-type body
107-1021
107-1022
107-1023
107-1024
107-1025
107-1026
107-1027
•1⁄2" NPS x 2" shanks
•1⁄2" slip fittings
•Chrome-plated brass
6" spout
8" spout
10" spout
12" spout
14" spout
16" spout
Gooseneck spout
No.
No.
No.
No.
112-1022
112-1024
112-1025
112-1026
8" spout
12" spout
14" spout
Gooseneck spout
1100 Series Faucets by T&S Brass
200 Series Faucets by T&S Brass
•1⁄2" NPS x 1" shanks
•Chrome-plated brass
•1⁄2" NPT female inlets
•Chrome-plated brass
No.
No.
No.
No.
No.
No.
No.
No.
No.
110-1050
110-1051
110-1046
110-1048
110-1053
6" spout
8" spout
10" spout
12" spout
Gooseneck spout
110-1049
110-1045
110-1047
110-1052
6" spout
10" spout
12" spout
Gooseneck spout
PLUMBING
PLUMBING
No.
No.
No.
No.
No.
No.
No.
Faucets by Fisher
Many items on this page are available
Lead-free Compliant.
Ask us about the item you need.
Phone: 800-257-7737
24-Hour Fax: 800-255-9866
489
PLUMBING
8" Center wall mount faucets
Commercial-Duty Faucets
Faucets by Chicago
•1⁄2" NPT female inlets
•Heavy cast chrome-plated brass body
• ⁄2" NPT female inlets
•Chrome-plated brass
1
No.
No.
No.
No.
114-1003
114-1004
114-1001
114-1002
No.
No.
No.
No.
No.
No.
No.
No.
6" spout
9" arched spout
12" spout
15" spout
107-1014
107-1015
107-1016
107-1017
107-1018
107-1019
107-1029
107-1020
6" spout
8" spout
10" spout
12" spout
14" spout
16" spout
18" double-jointed spout
Gooseneck spout
arched spout
Encore Faucets by CHG
•1⁄2" NPT female inlets
•“No splash” and “Bubbler” aerators included
•Contain internal check valves
•Chrome-plated brass
PLUMBING
No.
No.
No.
No.
No.
No.
107-1056
107-1057
107-1051
107-1052
107-1053
107-1055
6" spout
8" spout
10" spout
12" spout
14" spout
16" spout
Faucets by Fisher
•1⁄2" NPT male inlets
•Includes 2 sets of EZ Install inlet adaptors to retrofit
from Chicago, Encore, and Krowne
•Chrome-plated brass
No.
No.
No.
No.
No.
112-1014
112-1015
112-1016
112-1017
112-1018
6" spout
8" spout
10" spout
12" spout
14" spout
No. 112-1043 Base faucet only
•Spout not included
Many items on this page are available
Lead-free Compliant.
Ask us about the item you need.
490
fmponline.com
PLUMBING
8" Center wall mount faucets
200 Series Faucets by T&S Brass
1100 Series Faucets by T&S Brass
•Eterna series
•1⁄2" NPT female inlets
•Chrome-plated brass
•1⁄2" NPS x 1" shanks
•Chrome-plated brass
No.
No.
No.
No.
No.
No.
No.
No.
110-1019
110-1021
110-1009
110-1011
110-1013
110-1017
110-1015
110-1023
No.
No.
No.
No.
No.
No.
6" spout
8" spout
10" spout
12" spout
14" spout
18" spout
18" double-jointed spout
Gooseneck spout
110-1020
110-1022
110-1010
110-1012
110-1014
110-1018
6" spout
8" spout
10" spout
12" spout
14" spout
18" spout
Heavy-Duty Faucet with Adjustable
Centers by T&S Brass
No. 110-1033
No. 110-1032
•For use where water must be delivered rapidly
•12" spout
• 3⁄4" NPT female street elbow inlets
•Chrome-plated brass
•T&S no. B290
•Eterna series
•12" spout
•Adjustable centers from 21⁄4" to 81⁄4"
•1⁄2" NPT female inlets
•Chrome-plated brass
•T&S no. B236
PLUMBING
PLUMBING
High Volume Wall Mount
Faucet by T&S Brass
Many items on this page are available
Lead-free Compliant.
Ask us about the item you need.
Phone: 800-257-7737
24-Hour Fax: 800-255-9866
491
PLUMBING
service sink faucets
wall mount Service
Sink Faucet by T&S Brass
No. 110-1006
Encore Wall Mount
Service Sink Faucet with
Support Bracket by CHG
No. 107-1071
•Vacuum breaker spout
•7" rigid spout with hose thread
and pail hook
•8" centers
• 1⁄2" NPT female inlets
•Chrome-plated rough brass
•T&S no. B665BSTR
•Vacuum breaker spout
•Contains internal check valves
•61⁄2" spout with hose thread and pail hook
•8" adjustable centers
• 1⁄2" NPT female inlets
•Solid brass body with rough chrome finish
VACUUM BREAKER
Vacuum
Breaker
No. 111-1164
•For use on T&S Brass service
sink faucet (No. 110-1006)
•1⁄2" NPT
No. 111-1015
• 1⁄2" NPT
• Unfinished brass
No. 111-1176 Repair kit
• T&S no. B0969RK01
Many items on this page are available
Lead-free Compliant.
Ask us about the item you need.
PLUMBING
Encore wall mount Service
Sink Faucet by CHG
No. 108-1005
•21⁄2" rigid spout with pail
hook and hose thread
•8" centers
• 1⁄2" NPT female inlets
•Chrome-plated rough brass
492
fmponline.com
PLUMBING
laboratory faucets
wall mount Lab Sink
Faucet by T&S Brass
Deck mount Lab Sink
Faucet by T&S Brass
No. 110-1101
No. 110-1103
•4" wrist blades
•Rose spray outlet
•8" centers
• 1⁄2" NPT female inlets
•Chrome-plated brass
•T&S no. B350-4
•4" wrist blades
•4" centers
• 1⁄2" NPS x 21⁄4" shank
• 1⁄2" inlet adaptor nuts
•5" height from deck to spout tip
•Chrome-plated brass
•T&S no. B892
deck mount Lab Sink
Faucet by T&S Brass
No. 110-1102
•4" wrist blades
•Rose spray outlet
•Adjustable 61⁄2" to 8" centers
• 1⁄2" NPS x 2" shank
• 1⁄2" inlet adaptor nuts
•93⁄4" overall height
•43⁄4" height from deck to spout
•Chrome-plated brass
•T&S no. B865-4
Many items on this page are available
Lead-free Compliant.
Ask us about the item you need.
The most economical sink available. The raised
backsplash and sides reduce splashing. Made
from durable, high-impact plastic. Its compact size
requires 14" of wall space, making this sink ideal
for areas where space is limited.
No. 117-1062
•17" H x 14" W outside dimensions
•101⁄2" high backsplash
•12" x 12" x 5" high bowl
•11⁄4" NPS drain
•Designed for a 4" center deck mount faucet
•Drain and tailpiece included
Quik-wash™
hand wash
faucet control
Patented, antimicrobial control offers both
automatic self-closing and a hands-free, full-on
position, allowing for multi-purpose use.
No. 117-1211
•Reduce cross-contamination and water costs
•Includes universal adaptors that work with
virtually any faucet
•Handle constructed from antimicrobial material
•Solid brass and stainless steel
Note: Faucet not included.
Phone: 800-257-7737
24-Hour Fax: 800-255-9866
No. 150-6028
•Attaches to any gooseneck faucet to keep
nailbrush handy for use
•Innovative design helps wash dirt and bacteria
down the drain
•Rotates horizontally for easy cleaning of left
or right hand
•Flips up out of the way when not in use
•Brush can be easily removed for deep cleaning
in a dishwasher
•Holder accommodates a variety of brush brands
•Can be used with disposable hand and nail
brush (No. 150-6047)
493
PLUMBING
PLUMBING
Hand Sink
Kleen-Brush® hand
and nail cleaning system
by san jamar®
PLUMBING
Automatic
faucets
Eye Wash Station
Contains 2 GS-Plus™ spray-type heads with dust covers and hand
paddle activated valve.
No. 107-1080
●1⁄2" NPT female inlet
●11⁄4" NPT female drain outlet
●111⁄2" round stainless steel bowl
●Heavy-duty cast aluminum wall bracket
•Wall mount
●Includes ANSI compliant identification sign
CHEK POINT™
AUTOMATIC
FAUCET KIT
by T&S brass
Thermostatic Mixing Valve
No. 107-1081
●Used with Eye Wash Station (No. 107-1080)
●1⁄2" nominal sweat female inlet
●1⁄2" NPT female outlet
●Gauge display range 0° to 140°F (-20° to 60°C)
●Heavy-duty mounting bracket for securing to panel or wall
●Brass
●ANSI compliant
Hands-free operation virtually
eliminates cross-contamination.
No. 110-1116
•Gooseneck spout wall mount
•120 volt power supply
•Easy retrofit
•Can operate with 4 AA batteries (not included)
•T&S Brass nos. EC1101, EC3101
Eye Wash Station
by Bradley
No. 107-1079
•Does not interfere with normal faucet use
•Fits standard and gooseneck faucets
(adaptors included)
•One step activation
•ANSI compliant
AUTOMATIC FAUCET KITS
by EQUIP
Instant-Off™ Automatic
Faucet Controls
•Will fit on most brands of faucets
•Reduces cross-contamination and water costs
•Chrome-plated solid brass
•55⁄64" internal thread size, includes an external adaptor 15⁄16 -27 thread
•Theft-proof models are supplied with a special installation tool
PLUMBING
No. 117-1143 33⁄8" stainless steel push rod
No. 117-1144 Theft proof 33⁄8" stainless steel push rod
No. 117-1150 53⁄8" stainless steel push rod for gooseneck faucets
Hands-free operation virtually eliminates crosscontamination. Indicator lights alert you when
there are approximately 8000 cycles or 1
month of battery life remaining.
•
•
•
•
On/Off switch for manual operation
Red LED low battery indicator
60-second maximum running time
Includes 4 AA batteries and AC power adaptor
No. 110-1117 4" deck mount
No. 110-1120 Gooseneck
No. 253-1241 Replacement AA battery
Many items on this page are available
Lead-free Compliant.
Ask us about the item you need.
494
fmponline.com
PLUMBING
wall mount faucets
1100 Series Faucet
by T&S Brass
1100 Series Faucets
by T&S Brass
No. 110-1025
•4" centers
• 1⁄2" NPS x 1" shank
•Chrome-plated brass
•31⁄2" centers
•12" spout length
• 1⁄2" NPS x 1" shank
•Chrome-plated brass
•T&S no. B1108
ITEM No.
SPOUT
LENGTH
T&S No.
110-1029
110-1030
110-1027
110-1028
110-1031
6" 8" 10" 12" Gooseneck
B1115
B1116
B1117
B1118
B1146
Faucet by Fisher
Commercial-Duty Faucets
No. 112-1039
•4" centers
•1⁄2" NPS x 3⁄4" shank
•Chrome-plated brass
No. 107-1036 6" spout
No. 107-1035 10" spout
No. 107-1037 Gooseneck spout
PLUMBING
PLUMBING
•4" centers
•12" spout
•1⁄2" NPS x 1" shank
•Chrome-plated brass
•Fisher no. 3613
Many items on this page are available
Lead-free Compliant.
Ask us about the item you need.
Phone: 800-257-7737
24-Hour Fax: 800-255-9866
495
PLUMBING
4" Center DECK MOUNT faucets
SINGLE CONTROL
FAUCET by ZURN®
LAVATORY FAUCET
by ZURN®
LAVATORY FAUCET
by CHICAGO
No. 117-1290
No. 117-1292
No. 114-1006
•1⁄2" NPS x 2" shanks
•Includes inlet adaptor nuts
•2 GPM aerator
•Polished chrome-plated brass
•Zurn no. Z81000
•Lead-free
•18" long stainless steel flex hoses
•3⁄8" female compression fitting connections
•2.2 GPM aerator
•Polished chrome-plated housing with
lead-free brass internals
•Zurn no. Z7440
•
•
•
•
4" spout
⁄2" NPS x 21⁄4" long
Chrome-plated cast body
Chicago no. 802ACP, 802VCP
1
No. 114-1007 Reduced flow aerator
PLUMBING
Commercial-Duty Faucets
Faucets by Fisher
• 1⁄2" NPS x 15⁄8" shanks
• 1⁄2" slip fittings
•Chrome-plated brass shell-type body
• 1⁄2" NPS x 2" shanks
• 1⁄2" slip fittings
•Chrome-plated brass
No.
No.
No.
No.
No.
No.
ITEM No.
SPOUT
LENGTH
Fisher No.
112-1028
112-1029
112-1031
112-1032
112-1033
6" 8" 12" 14" Gooseneck
3510
3511
3513
3514
3515
107-1007
107-1008
107-1009
107-1010
107-1011
107-1013
6" spout
8" spout
10" spout
12" spout
14" spout
Gooseneck spout
Many items on this page are available
Lead-free Compliant.
Ask us about the item you need.
496
fmponline.com
PLUMBING
4" Center deck mount faucets
Slow Closing
Lavatory Faucet WITH
Rigid GOOSENECK SPOUT
by T&S Brass
Slow Closing
Lavatory Faucet
by T&S Brass
No. 107-1045
• 1⁄2" NPS x 17⁄8" shanks
• 1⁄2" inlet adaptor nuts
•Chrome-plated die-cast zinc
No. 110-1109
No. 110-1112
• 1⁄2" NPS x 11⁄2" shanks
• 1⁄2" inlet adaptor nuts
•Chrome-plated brass
•T&S no. B831
•Eterna series
•1⁄2" NPS x 11⁄2" shanks
•1⁄2" inlet adaptor nuts
•Chrome-plated brass
•T&S no. B834
1100 series Faucets
by t&S BRASS
200 series Faucets
by t&S BRASS
• 1⁄2" NPS x 1" shanks
•Chrome-plated brass
• 1⁄2" NPT female inlets
•Chrome-plated brass
ITEM No.
SPOUT
LENGTH
T&S No.
ITEM No.
SPOUT
LENGTH
T&S No.
110-1040
110-1042
110-1036
110-1038
110-1044
6" 8" 10" 12" Gooseneck
B1110
B1111
B1112
B1113
B1141
110-1039
110-1041
110-1035
110-1037
110-1043
6" 8" 10" 12" Gooseneck
B228
B227
B226
B225
B325
PLUMBING
PLUMBING
Lavatory Faucet
Many items on this page are available
Lead-free Compliant.
Ask us about the item you need.
Phone: 800-257-7737
24-Hour Fax: 800-255-9866
497
PLUMBING
DECK MOUNT pantry faucets
Swivel Faucet
by T&S Brass
Swivel Gooseneck
Encore Faucet by CHG
No. 110-1008
No. 107-1059
•6" spout
• 1⁄2" NPS x 23⁄8" shank
• 1⁄4" NPT male inlet
•Chrome-plated brass
•T&S no. B207
•11⁄8" OD x 21⁄4" shank
• 1⁄4" male inlets on 4" centers
•“No splash” aerator included
•9" high from deck to spout tip
•13" overall height from deck
•Contains internal check valves
•Chrome-plated brass
Rigid Gooseneck Faucet
by T&S Brass
No. 110-1062
• 1⁄2" NPS x 23⁄8" shank
• 1⁄4" NPT male inlet
•81⁄4" height from deck to spout tip
•131⁄4" overall height from deck
•Chrome-plated brass
•T&S no. B305
Rigid Gooseneck FAUCET
by T&S Brass
Swivel Gooseneck Faucet
by T&S Brass
No. 110-1064
No. 110-1063
•11⁄8" OD x 21⁄4" shank
• 1⁄4" NPT male inlet on 4" centers
•8" height from deck to spout tip
•13" overall height from deck
•Chrome-plated brass
•T&S no. B300
• ⁄2" NPS x 2 ⁄8" shank
• 1⁄4" NPT male inlet
•81⁄4" height from deck to spout tip
•121⁄4" overall height from deck
•Chrome-plated brass
•T&S no. B306
1
3
PLUMBING
Many items on this page are available
Lead-free Compliant.
Ask us about the item you need.
498
fmponline.com
PLUMBING
pot & kettle filler faucets
Deck Mount
Elevated Kettle
Filler Faucet
by T&S Brass
No. 110-1092
•18" spout
•271⁄4" height from deck to spout tip
• 1⁄2" NPS x 21⁄2" shank
• 1⁄4" NPT male inlet
•Chrome-plated brass
•T&S no. B275
Wall Mount Single Handle
Pot and Kettle Filler
by T&S Brass
No. 110-1061
• 1⁄2" NPT female inlet
•60" stainless steel flexible hose
•Vacuum breaker included
•Chrome-plated brass
•T&S no. B605
Wall mount Double Handle
Pot and Kettle Filler
by T&S Brass
No. 110-1060
Deck Mount
Elevated Kettle
Filler Faucet
by T&S Brass
replacement hose
and valve for Pot
and Kettle Filler
by T&S Brass
No. 110-1108
No. 110-1059
•18" spout
•271⁄4" height from deck to spout tip
•11⁄8" OD x 21⁄4" center shank
• 1⁄4" NPT male inlets on 4" centers
•Chrome-plated brass
•T&S no. B270
• 1⁄2" NPT male inlet
•60" stainless steel flexible hose
•Chrome-plated brass
•T&S no. B102A
PLUMBING
PLUMBING
•8" centers
• 1⁄2" NPT female inlets
•60" stainless steel flexible hose
•Vacuum breaker included
•Chrome-plated brass
•T&S no. B610
Many items on this page are available
Lead-free Compliant.
Ask us about the item you need.
Phone: 800-257-7737
24-Hour Fax: 800-255-9866
499
PLUMBING
double-jointed faucets
Wall mount Double Handle
Faucets by T&S Brass
wall mount Single Handle
Faucets by T&S Brass
No. 110-1056
No. 110-1054
•18" double-jointed spout with On/Off nozzle control
•8" centers
• 1⁄2" NPT female inlets
•Chrome-plated brass
•T&S no. B597
•18" double-jointed spout with On/Off nozzle control
• 1⁄2" NPT female inlet
•Chrome-plated brass
•T&S no. B592
No. 110-1015 Same except without On/Off nozzle control
•T&S no. B265
No. 110-1055 Same except without On/Off nozzle control
•T&S no. B260
PLUMBING
deck mount Single Handle
Faucet by T&S Brass
ON/OFF NOZZLE CONTROL
by T&S Brass
No. 110-1057
No. 110-1111
•18" double-jointed spout with On/Off nozzle control
• 1⁄2" NPS x 21⁄4" shank
• 1⁄4" NPT male inlet
•Chrome-plated brass
•T&S no. B590
•For use on faucets; Nos. 110-1054, 1101056, and 110-1057
•T&S nos. 5948-40, 35A
Many items on this page are available
Lead-free Compliant.
Ask us about the item you need.
500
fmponline.com
PLUMBING
wok range faucets
Encore® Wall Mount Wok Range
Faucet with Swing Spout by CHG
No. 107-1070
Automatic Wall Mount
Wok Range Swing Faucet
No. 107-1031
•12" spout
• 3⁄8" NPT male inlet
•Chrome-plated brass
•For installation between 2 woks
• 1⁄4 turn of lever operates faucet
•10" spout with aerator
•18" overall projection
• 1⁄2" NPS x 1" shank
• 1⁄2" NPS male inlet fitting
•Chrome-plated brass
No. 106-1167 Aerator
Center-on faucet—for use over 1 wok
WALL MOUNT WOK RANGE FAUCET
by CHICAGO
wall mount Wok Range Faucet
by Fisher
No. 114-1008
•For installation between 2 woks
• 1⁄4 turn of lever operates faucet
• 1⁄2" NPS x 1" shank
• 1⁄2" slip fitting
•Chrome-plated brass
For installation between 2 woks
1
⁄4 turn of lever operates faucet
12" spout with aerator
22" overall projection
1
⁄2" NPT inlet
Chrome-plated brass
Chicago nos. 334CP, CF8231H201LC
No. 112-1037 10" spout with aerator
•181⁄2" overall projection
•Fisher no. 4750
No. 112-1042 12" spout with aerator
•161⁄2" overall projection
•Fisher no. 9119
PLUMBING
PLUMBING
•
•
•
•
•
•
•
Many items on this page are available
Lead-free Compliant.
Ask us about the item you need.
Phone: 800-257-7737
24-Hour Fax: 800-255-9866
501
PLUMBING
specialty faucets
Swivel Spout Faucet
No. 107-1032
•Swivels 360°
•41⁄2" spout
• 1⁄2" NPS x 11⁄4" shank
• 1⁄4" NPT inlet
•Chrome-plated brass
Inlet Faucet
1
No. 107-1048
•1⁄2" NPS x 11⁄4" shank
• 1⁄2" slip fitting
•Chrome-plated brass
5
2
3
6
4
7
Steam Jacketed
Kettle Faucets
•Faucets and parts are interchangeable with
similar faucets used by Cleveland, Groen,
Market Forge, Legion, and others
• Stainless steel
No. 107-1038 For 11⁄2" OD tubing
No. 107-1039 For 2" OD tubing
No. 107-1040 For 3" OD tubing
Commercial-Duty Swivel
Spout Steam Table Faucet
Inlet Faucet
No. 107-1028
•Aerator tip
• 1⁄2" NPS x 11⁄4" shank
• 1⁄2" slip fitting
•Chrome-plated brass
•Spout swivels 360°
•6" spout
• 1⁄2" NPS x 13⁄4" shank
• 1⁄2" slip fitting
•Chrome-plated brass
Kettle Faucet Parts
No. 107-1049
Stock Pot Faucet
PLUMBING
No. 107-1042
•Replaces ⁄4" faucet used by Legion, Lincoln,
Commercial Aluminum, and others
• 3⁄4" NPT x 5⁄8" shank
•Satin nickel
3
502
Water control valve
No. 107-1077
• 1⁄2" NPT inlet x 1⁄2" compression outlet
•Chrome-plated
fmponline.com
REF
No. ITEM No.
DESCRIPTION
For
1.
2.
4.
5.
6.
7.
1 ⁄2" Faucets
106-1064
106-1060
106-1061
106-1062
106-1063
106-1059
Handle wing nut
Handle
Large nut
Bonnet
O-ring
Stem
For
1.
2.
4.
5.
6.
7.
2" Faucets
106-1064
106-1060
106-1066
106-1067
106-1063
106-1065
Handle wing nut
Handle
Large nut
Bonnet
O-ring
Stem
For
1.
3.
4.
5.
6.
7.
3" Faucets
106-1042
106-1038
106-1039
106-1040
106-1041
106-1037
Handle wing nut
Handle
Large nut
Bonnet
O-ring
Stem
1
PLUMBING
General Use Faucet Parts
Universal Wrist Blade Set
No. 106-1142
•Set screw holds handles snug
•Set includes two 4" long wrist blades with
securing bases and set screws, hot and cold
index buttons, and an Allen wrench
Faucet Hole
Cover
No. 117-1125
•13⁄4" diameter
•Plated steel
Pro-Extreme™
Pipe Cover
No. 117-1252
•For use on lavatory drain pipes and
supply lines
•Prevents exposure to high temperature pipes
•Easy to remove and reinstall
•White PVC with tear guides for custom fit
•Includes 1 P-trap cover and 2 valve and
supply line covers
SUPPLY LINE
SINK Drain PIPE
INSTALLATION KIT
by ZURN®
No. 117-1291
•For hand sink plumbing installation
•Kit includes: 11⁄4" drain with a 6" extension pipe
11⁄4" P-type trap with a clean-out
Two 1⁄2" IPS x 1⁄2" compression water valves with tubing
Protective pipe cover for drain and water valves
•Zurn no. Z9901-000-77-24-5
No. 113-1084
•36" long, braided stainless steel
• 1⁄2" NPT female x 1⁄2" NPT male fittings
1
3
2
Faucet Inlet Nipple
and Lock Nut
No. 111-1166
•Use to connect wall mount faucet or
pre-rinse to supply line
•Will fit within a standard 2" backsplash
• 1⁄2" NPT female inlet and outlet
•90°
•Brass
•Converts faucets from female to male inlets
•1⁄2" NPS x 2" L
•Brass
Spout Accessories
1. No. 106-1044
2. No. 111-1028
3. No. 106-1043
Hose adaptor
Stream regulator
Aerator
PLUMBING
PLUMBING
Elbow
No. 106-1027 Inlet nipple
No. 117-1023 1⁄2" NPS lock nut
Phone: 800-257-7737
24-Hour Fax: 800-255-9866
503
PLUMBING
Parts for Central Brass Faucets
1
Spouts
2
Handles and
Stem Assemblies
•Include aerators
No. 109-1008 8" spout
No. 109-1009 12" spout
No. 109-1007 14" spout
3
Handles
Spout Accessories
No. 109-1006 Cold
No. 109-1004 Hot
Full-Turn Stem and Seat Assemblies
No. 109-1002 Cold
No. 109-1005 Hot
1. No. 106-1044 Hose adaptor
2. No. 111-1028 Stream regulator
3. No. 106-1043 Aerator
Parts for Commercial-Duty Faucets
PLUMBING
Quarter-turn Faucet
Repair Kit
4" Quarter-turn
Wrist Blade Kit
No. 106-1020
No. 106-1141
•For wall and deck mount cast brass faucets
•Kit includes 2 each: handles, stems, seats, seat
washers, washer screws, bonnets, spout O-rings,
and stem O-rings
•For wall mount cast brass faucets
•Includes wrist blades and stem repair kits
•Chrome-plated brass
Coupling Flange
Deck Mount Kit
No. 106-1024
No. 117-1137
•Sold as a pair
• Includes 2 washers
•For simple installation of deck faucets and
pre-rinses
•Converts female inlets to male
•Kit includes 2 each: 1⁄2" NPS x 2" long nipples,
washers, and lock nuts
504
Inlet Nipple Kit
No. 117-1009
•For installing faucets in a standard 2" backsplash
•Converts female inlets to male
•Kit includes: Two 1⁄2" NPS x 11⁄2" brass nipples with lock nuts and washers;
Two 1⁄2" NPT x 1⁄2" sweat brass elbows
fmponline.com
PLUMBING
Parts for Commercial-Duty Faucets
4
5
Full-Turn Faucet
Repair Kit
Faucet Handle Repair Kit
No. 106-1143 For wall mount shell body faucets
•For hot or cold water handle assemblies
•Kit includes: handle, blue index disk, red index
disk, and handle screw
•Chrome-plated brass
No. 106-1147
•For use on hand sink wall faucets
(Nos. 107-1035, 107-1036, 107-1037)
•Kit includes 2 each: handles, stems, seats,
seat washers, washer screws, bonnets, spout,
O-rings, and stem O-rings
4" Wrist Blade Set
and Cover
4. No. 106-1136 Wrist blades only
•For new 20 tooth spline design
•Treated with Saniguard®
antimicrobial coating
•Includes index buttons and screws
•Chrome-plated brass
5. No. 106-1173 Handle cover only
•Sold individually
1
Spouts
3
Spout Accessories
1. No. 106-1044 Hose adaptor
2. No. 111-1028 Stream regulator
3. No. 106-1043 Aerator
Phone: 800-257-7737
24-Hour Fax: 800-255-9866
106-1011
106-1012
106-1013
106-1014
106-1015
106-1016
106-1017
106-1028
6" spout
8" spout
10" spout
12" spout
14" spout
16" spout
Swivel gooseneck spout
18" double-jointed spout
PLUMBING
PLUMBING
No.
No.
No.
No.
No.
No.
No.
No.
2
505
PLUMBING
Parts for chg Encore® Faucets
3
Full-Turn Faucet Repair Kits
1
•Kit includes 1 each: stem, removable insert,
brass backcheck with seat washer and screw;
2 each: seat washers and seat washer screws; 3 each: packings, top gaskets,
bottom gaskets, backcheck springs; and 4 each:
spout O-rings
4
2
5
No. 106-1145 Cold water valve
No. 106-1146 Hot water valve
6
8
QUARTER-TURN
STEM ASSEMBLIES
•For model series KN50
•Can be used to retro-fit existing
full-turn faucets
7
No. 106-1162 Cold
No. 106-1163 Hot
Faucet Handle Repair Kit
No. 106-1147
•Kit includes: handle, blue index disk, red index
disk, and handle screw
•Chrome-plated brass
Full-turn Faucet and
Pre-Rinse Stem Parts
REF
No.
ITEM No.
1
106-1147
2
106-1123
2
106-1124
3
106-1108
3
106-1112
4
106-1109
5
106-1110
6
106-1111
6
106-1113
7
106-1129
8
106-1128
DESCRIPTION
Cold/hot handle
Cold stem assembly (full-turn)
Hot stem assembly
(full-turn)
Cold stem
Hot stem
Spring
Brass backcheck with
washer and screw
Cold removable insert
Hot removable insert
Teflon® seat gasket
Coupling flange washer
9
QUARTER-TURN
STEM ASSEMBLIES
• For models KN41, KN45
quarter-turn faucets
• Solid brass valve seat
PLUMBING
No. 106-1170 Cold
No. 106-1171 Hot
10
4" Wrist Blade Set
and Cover
9. No. 106-1136 Wrist blades only
•For new 20-tooth spline design
•Treated with Saniguard®
antimicrobial coating
•Includes index buttons and screws
•Chrome-plated brass
10. No. 106-1173 Handle cover only
•Sold individually
506
fmponline.com
PLUMBING
Parts for chg Encore® Faucets
2
1
3
Spout Accessories
1. No. 106-1044 Hose adaptor
2. No. 111-1028 Stream regulator
3. No. 106-1043 Aerator
Spouts
No.
No.
No.
No.
No.
No.
No.
No.
Swing to Rigid
Spout Adaptor
No. 106-1149
•Converts a standard Encore swivel spout to a
3
⁄8" NPT riser pipe or rigid gooseneck spout
•Chrome-plated brass
106-1011
106-1012
106-1013
106-1014
106-1015
106-1016
106-1028
106-1017
6" spout
8" spout
10" spout
12" spout
14" spout
16" spout
18" double-jointed spout
Gooseneck spout
Adjustable Supply Inlets
Permits easy, fast installation by providing
adjustability of different faucet or pre-rinse centers
to match varying installation centers.
No. 106-1159
•2" total range
• 1⁄2" NPT female inlets
•Coupling flange washers included
•Deck mount kit included (No. 117-1137)
•Chrome-plated brass
Inlet Nipple Kit
No. 117-1009
No. 117-1137
•For simple installation of deck faucets and
pre-rinses
•Converts female inlets to male
•Kit includes 2 each: 1⁄2" NPS x 2" long nipples,
washers, and lock nuts
Phone: 800-257-7737
24-Hour Fax: 800-255-9866
PLUMBING
PLUMBING
Deck Mount Kit
•For installing faucets in a standard 2" backsplash
•Converts female inlets to male
•Kit includes: Two 1⁄2" NPS x 11⁄2" brass nipples
with lock nuts and washers;
Two 1⁄2" NPT x 1⁄2" sweat brass elbows
507
PLUMBING
Parts for Chicago Faucets
1
2
Spouts
1.
1.
1.
2.
3.
4.
5.
No.
No.
No.
No.
No.
No.
No.
115-1015 6" spout
115-1010 12" spout
115-1011 15" spout
115-1020 8" spout
115-1024 9" spout
115-1007 Swivel gooseneck spout
115-1005 18" double-jointed spout
3
4
5
Spout Accessories
6. No.
7. No.
8. No.
9. No.
7
115-1026
115-1025
115-1027
114-1007
9
PLUMBING
6
8
508
fmponline.com
Hose adaptor
Stream tip
Aerator
Reduced flow aerator
PLUMBING
Parts for Chicago Faucets
Spout Adaptor
Inlet Nipple Kit
4" Wrist Blades
No. 115-1028
No. 117-1009
No. 115-1012
•Converts a standard Chicago swivel spout to a
3
⁄8" NPT riser pipe or rigid gooseneck spout
•Chrome-plated brass
•For installing faucets in a standard
2" backsplash
•Converts female inlets to male
•Kit includes: two 1⁄2" NPS x 11⁄2" brass nipples with
lock nuts and washers; two 1⁄2" NPT x 1⁄2" sweat
brass elbows
•Sold by the pair
•Includes index buttons and screws
2
1
Faucet Repair Kit
No. 115-1006
•Kit includes 2 each of gaskets, seat O-rings,
seat washers, packings, packing O-rings,
sleeve O-rings, hard seat washers, stem O-rings,
and 4 packing washers
•Repairs 2 "X" style or 2 “XT” style cartridges
3
Quarter-Turn Handles
and Stem Assemblies
Deck Mount Kit
Handles
1. No. 115-1013 Cold
2. No. 115-1014 Hot
•For simple installation of deck faucets and
pre-rinses
•Converts female inlets to male
•Kit includes: 2 each of 1⁄2" NPS x 2" long
nipples, washers and lock nuts
Quaturn XT Stem Assemblies
3. No. 115-1009 Cold–1 identifier ring
4. No. 115-1008 Hot–2 identifier rings
Phone: 800-257-7737
24-Hour Fax: 800-255-9866
No. 117-1137
PLUMBING
PLUMBING
4
509
PLUMBING
Parts for Fisher Faucets
Handle
No. 113-1023
•Includes hot and cold index buttons and
screw
•Chrome-plated brass
•Sold individually
Spouts
No.
No.
No.
No.
No.
No.
Stem Assemblies
•For faucets with 1⁄2" stem assemblies
•Include 1 each: screw, red button,
blue button, lever handle, bibb cap,
duck gasket, washer, check stem, and
tube of lubricant (not shown)
113-1058
113-1059
113-1060
113-1061
113-1062
113-1063
6" spout
8" spout
10" spout
12" spout
14" spout
Swivel gooseneck spout
No. 113-1057 Spout O-ring
No. 113-1087 Left-hand
No. 113-1086 Right-hand
4" Wrist Blade
No. 113-1002
4
•Includes hot and cold index buttons
and screw
•Chrome-plated brass
•Sold individually
5
6
Spout
Adaptors
STEM ASSEMBLY KITS
4. No. 113-1021 Fisher spout thread female
inlet to 3⁄8" NPT female outlet
• Converts swing spout to a rigid spout
1
3
•For faucets with 3⁄4" stem assemblies
PLUMBING
No. 113-1088 Right
No. 113-1089 Left
2
Spout Accessories
1. No. 106-1044 Hose adaptor
2. No. 111-1028 Stream regulator
3. No. 106-1043 Aerator
510
5. No. 113-1022 3⁄8" NPT male inlet to Fisher
spout thread male outlet
• Converts rigid spout to swing spout
6. No. 113-1080 71⁄2" double-jointed
spout adaptor
• Converts spout to double-jointed spout
fmponline.com
PLUMBING
Parts for Fisher Faucets
Repair Kit
No. 113-1076
•For Fisher faucets, glass fillers, and spray valves
•Kit Includes: 2 each of spray nozzles,
2 each black bumpers;
6 each of handle gaskets,
6 each of check valve springs,
6 each of duck stem gaskets,
6 each of hard 1⁄4" seat washers, 6 each of soft 1⁄4" seat washers, 6 each of squeeze lever screws, 6 each of seat washer screws,
6 each of spray valve springs, 6 each of spout O-rings,
6 each of lift pins with O-rings, 6 each of aqua flow lubricants
You Talk,
We Listen
We value your opinion.
If you ever have any questions,
concerns, or feedback, please call
us. Our staff and management
are prepared to listen to you
at any time. We want your
relationship with FMP to be as
easy and profitable as possible.
wall adaptor Elbow
SUPPLY LINE
No. 113-1083
No. 113-1084
•Use to connect wall mount faucet or pre-rinse
to supply line*
•Will fit within a standard 2" backsplash
• 1⁄2" NPT female inlet and outlet
•Brass
•36" long, braided stainless steel
• 1⁄2" NPT female x 1⁄2" NPT male fittings
PLUMBING
PLUMBING
It is the foundation of our business.
*1⁄2" NPT nipple kits (Nos. 117-1137, 117-1009)
may be required with most wall mounted faucet
and pre-rinse applications.
Phone: 800-257-7737
24-Hour Fax: 800-255-9866
511
PLUMBING
Parts for T&S Brass Faucets
1
3
2
Eterna Series
(200 series)
Eterna Series Faucet
Stem Assembly Parts
REF
No. ITEM No.
4
5
6
7
15
8
9
10
11
1.
2.
2.
3.
3.
4.
5.
6.
7.
8.
8.
9.
10.
11.
11.
11.
11.
12.
13.
14.
15.
15.
111-1094
111-1071
111-1072
111-1147
111-1075
111-1114
111-1113
111-1106
111-1134
111-1136
111-1080
111-1085
111-1091
111-1135
111-1178*
111-1133
111-1179*
111-1132
111-1079
111-1084
111-1090
111-1092
DESCRIPTION
Screw
Cold index button
Hot index button
Cold handle assembly
Hot handle assembly
Packing nut
Packing
Bonnet assembly
Bonnet gasket
Cold stem assembly
Hot stem assembly
Seat washer
Seat washer screw
Cold insert
Cold insert (Monel seat)
Hot insert
Hot insert (Monel seat)
Seat gasket
Washer
Coupling flange
Eterna cold stem assembly (full-turn)
Eterna hot stem assembly (full-turn)
*Monel seat can withstand higher temperatures and hard water
12
14
13
Slow-Closing
Stem Assemblies
No. 111-1104 Cold
No. 111-1105 Hot
PLUMBING
•Fits all Eterna models
No. 111-1177 Spanner bit
(not shown)
•Size #8
512
Cerama Cartridges
No. 111-1169 Ceramic hot stem assembly
No. 111-1170 Ceramic cold stem assembly
No. 111-1171 Ceramic hot stem assembly with
check valve
No. 111-1172 Ceramic cold stem assembly with
check valve
fmponline.com
Repair Kit for Eterna
Full-Turn stem assemblies
No. 111-1049
•Kit includes: 1 each cold spindle,
1 each hot spindle,
1 each removable hot insert,
1 each removable cold insert;
4 each seat screws,
6 each Teflon® packings;
10 each seat gaskets,
12 each bonnet gaskets;
22 each seat washers
PLUMBING
Parts for T&S Brass Faucets
1
3
2
1100 Series Faucet
Full-Turn Stem Parts
REF
No.
1.
2.
2.
3.
3.
4.
5.
6.
7.
8.
9.
9.
10.
11.
12.
13.
13.
ITEM No.
111-1094
111-1071
111-1072
111-1147
111-1075
111-1162
111-1163
111-1145
111-1143
111-1139
111-1067
111-1137
111-1085
111-1091
111-1111
111-1099
111-1098
1100 Series
DESCRIPTION
Screw
Cold index button
Hot index button
Cold handle assembly
Hot handle assembly
O-ring
Washer
Stainless steel washer
Rubber washer
Brass washer
Cold stem
Hot stem
Seat washer
Seat washer screw
Removable seat
Cold stem assembly
Hot stem assembly
4
5
4
13
6
7
8
9
10
11
12
14
Handles
•Fits either Eterna or 1100 series faucet stems
•Sold individually
REF
No. ITEM No.
DESCRIPTION
14 111-1107
15 111-1030
15 111-1031
Cross handle
4" wrist blade
6" wrist blade
INDEX BUTTONS for
wrist blade handles
Repair Kit for Full-Turn
1100 Series Faucets
•For wrist blade handles (Nos. 111-1030 and 111-1031)
No. 111-1040
No. 111-1173 Cold water (blue)
No. 111-1174 Hot water (red)
Phone: 800-257-7737
24-Hour Fax: 800-255-9866
•Kit includes 1 each: cold spindle, hot spindle; 2 each: rubber bonnet washers, stainless steel
bonnet washers, brass bonnet washers, swivel
piece O-rings; 4 each: seat washer screws, and seat washers
513
PLUMBING
PLUMBING
15
PLUMBING
Parts for T&S Brass Faucets
1
2
Spouts
3
No.
No.
No.
No.
No.
No.
No.
No.
No.
No.
4
Spout Accessories
1. No. 111-1028 Stream tip
2. No. 106-1044 Hose adaptor
3. No. 106-1043 Aerator
111-1148
111-1142
111-1055
111-1060
111-1065
111-1081
111-1077
111-1078
6" spout
8" spout
10" spout
12" spout
14" spout
18" spout
18" double-jointed spout
18" double-jointed spout
with shut-off on nozzle
111-1051 Rigid gooseneck spout
111-1052 Swivel gooseneck spout
Spout Parts (not shown)
• Fits T&S spouts with male thread
No. 111-1069 Spout O-ring
No. 111-1127 Spout washer
4. No. 111-1029 Aerator
• Fits T&S spouts with 3⁄8" NPT female thread
Replacement
ON/OFF
NOZZLE CONTROL
5
6
No. 110-1111
7
•For use on T&S double-jointed faucets
Spout Adaptors
5. No. 111-1042 Spout adaptor
• 3⁄8" NPT rigid spout to swing spout
Faucet Inlet Nipple
and Lock Nut
6. No. 111-1043 Spout adaptor
•Swing spout to 3⁄8" NPT rigid spout
•Converts faucets from female to male inlets
• 1⁄2" NPS x 2" L
•Brass
7. No. 111-1044 Spout adaptor
•Converts a 3⁄8" NPT rigid gooseneck to a swivel spout
No. 106-1027 Inlet nipple
No. 117-1023 1⁄2" NPS lock nut
kits
PLUMBING
514
Universal Replacement
Cross Handle Kit
Universal Replacement
Canopy Handle Kit
No. 106-1051
No. 106-1052
•Set screw holds handle snug
•Kit includes cold and hot handles
•Set screw holds handle snug
•Kit includes cold and hot handles and all
necessary hardware
fmponline.com
PLUMBING
kits
Large O-Ring Kit
Faucet Washer Kit
Packed in divider case with sizing guide
Kit includes: 380 O-rings in the following sizes:
No. 106-1054
No. 142-1124
•Kit includes: 36 assorted flat and beveled
neoprene washers and 9 screws
Qty.
ID
20
20
20
20
20
20
20
13
13
13
13
13
13
13
10
10
10
10
10
10
10
10
10
10
10
10
10
7
7
7
1
Deck Mount Kit
No. 117-1137
•For simple installation of deck faucets and pre-rinses
•Converts female inlets to male
•Kit includes: 2 each of 1⁄2" NPS x 2" long
nipples, washers, and lock nuts
⁄8"
OD
⁄32"
5
⁄16"
7
⁄32" 1
⁄4"
5
⁄16"
3
⁄8"
3
⁄8" 7
⁄16" 1
⁄2" 9
⁄16" 5
⁄8" 11
⁄16"
3
⁄4" 3
⁄4" 13
⁄16" 7
⁄8" 15
⁄16" 1" 11⁄16"
11⁄8"
13⁄16"
11⁄4" 15⁄16"
13⁄8"
17⁄16"
11⁄2"
11⁄2"
15⁄8"
13⁄4"
3
⁄4"
Thickness
⁄16"
1
1
⁄32"
1
5
⁄16" 11
⁄32" 3
⁄8" 7
⁄16" 1
⁄2" 9
⁄16" 5
⁄8" 11
⁄16" 3
⁄4" 13
⁄16" 7
⁄8" 15
⁄16" 1" 11⁄16"
11⁄8"
13⁄16" 11⁄4"
15⁄16" 13⁄8" 17⁄16" 11⁄2" 19⁄16"
15⁄8"
111⁄16"
13⁄4"
17⁄8"
2"
21⁄8"
9
⁄16"
⁄16"
1
⁄16"
1
⁄16"
1
⁄16"
1
⁄16"
1
⁄32"
3
⁄32"
3
⁄32"
3
⁄32"
3
⁄32"
3
⁄32"
3
⁄32"
3
⁄8"
1
1
1
1
⁄8"
⁄8"
SINK Drain PIPE
INSTALLATION KIT
by ZURN®
No. 117-1291
•For hand sink plumbing installation
•Kit includes: 11⁄4" drain with a 6" extension pipe
11⁄4" P-type trap with a clean-out
Two 1⁄2" IPS x 1⁄2" compression water valves with tubing
Protective pipe cover for drain and water valves
•Zurn no. Z9901-000-77-24-5
⁄8"
1
1
1
⁄8"
⁄8"
⁄8"
1
1
1
⁄8"
⁄8"
⁄8"
1
1
1
⁄8"
⁄8"
⁄8"
⁄16"
3
⁄16"
3
⁄16"
3
PLUMBING
PLUMBING
Inlet Nipple Kit
No. 117-1009
•For installing faucets in a standard 2" backsplash
•Converts female inlets to male
•Kit includes: two 1⁄2" NPS x 11⁄2" brass nipples with lock nuts and washers; two 1⁄2" NPT x 1⁄2" sweat brass elbows
Small O-Ring Kit
No. 142-1125
•Packed in divider case with sizing guide
•Kit includes: 200 O-rings in popular sizes from 3
⁄8" OD to 11⁄8" OD
Phone: 800-257-7737
24-Hour Fax: 800-255-9866
Faucet Seat Kit
No. 117-1002
•Kit includes: 100 assorted brass seats
•Plastic case
515
PLUMBING
deck mount pre-rinses
ENCORE
SWIVEL ARM
PRE-RINSE
by CHG
Pre-Rinse
by Fisher
No. 107-1073
No. 112-1007
•Swivel arm allows a 360° rotation
•1⁄4" NPT male inlets on 4" centers
•33" high with a 12" overhang
•Contains internal check valves
•Includes water-saving and
conventional spray heads, wall bracket, and heavy-duty swivel arm bracket
•Chrome-plated brass
•Conforms to the Energy Policy
Act of 2005 when using the
included water-saving spray face
•11⁄16" OD x 2" center shank
• Two 16" long flexible braided
steel inlets
•Two 3⁄8" OD compression x 1
⁄2" male NPT adaptor
•35" high with a 12" overhang
•Contains internal check valves
•1.15 GPM
•Conforms to the Energy
Policy Act of 2005
•Chrome-plated brass
•Wall mount bracket
•Fisher 2110 series
Encore® Pre-Rinse
by CHG
Pre-Rinse
by Chicago
No. 107-1060
No. 114-1005
LOW-FLOW
PRE-RINSE
by T&S BRASS
Encore® Pre-Rinse
by CHG
No 107-1065
• ⁄2" NPT female inlets on 8" centers
•40" high with a 15" overhang
•Contains internal check valves
•Includes two 1⁄2" NPT nipples,
2 steel washers, 2 rubber
washers, and 2 flanged lock
nuts to adapt faucet base to 1
⁄2" NPT female inlets
•Conforms to the Energy Policy
Act of 2005 when using the
included water-saving spray face
•Chrome-plated brass
1
⁄4"
• NPT male inlets on 4" centers
•11⁄8" OD x 21⁄4" shank
•40" high with a 15" overhang
•Contains internal check valves
•Conforms to the Energy Policy Act of 2005 when using the included water-saving spray face
•Chrome-plated brass
1
PLUMBING
• 1⁄4" NPT male inlets on 4" centers
•11⁄16" OD x 21⁄4" shank
•44" high
•Contains internal check valves
•1.25 GPM
•Conforms to the Energy Policy
Act of 2005
•Chrome-plated brass
•Chicago no. 919
No. 110-1121
• 45" high with a 14" overhang
•Two 1⁄2" NPT x 20" braided steel
supply lines
•Contains internal check valves
• 1.2 GPM
•Pre-assembled with Easy-Install®
fitting and locking nut
•T&S no. B0113C
Many items on this page are available
Lead-free Compliant.
Ask us about the item you need.
516
fmponline.com
PLUMBING
deck mount pre-rinses
by T&S Brass
MINI PRE-RINSE
with Spout
No. 110-1123
Pre-Rinse
Pre-Rinse
No. 110-1073
No. 110-1070
• ⁄2" NPT female inlets on 8" centers
•40" high with a 15" overhang
•Pre-assembled with Easy-Install® fitting and locking nut
•Contains internal check valves
•1.42 GPM
•Conforms to the Energy
Policy Act of 2005
•Chrome-plated brass
•T&S no. B123
•18" flex lines
•11⁄8" OD x 21⁄4" shank
•40" high with a 15" overhang
•Pre-assembled with Easy-Install® fitting and locking nut
•Contains internal check valves
•1.42 GPM
•Conforms to the Energy
Policy Act of 2005
•Chrome-plated brass
•T&S no. B113
1
•8" spout
•18" flex lines
•11⁄8" OD x 21⁄4" shank
•241⁄2" high with an 87⁄8" overhang
•Pre-assembled with Easy-Install®
fitting and locking nut
•Contains internal check valves
and ceramic cartridges
•Conforms to the Energy Policy Act of 2005
•Chrome-plated brass
•T&S no. MPZ2DLN08CR
Swivel Arm
Pre-Rinse
Pre-Rinse
No. 110-1071
• 1⁄4" NPT male inlets on 4" centers
• 1⁄2" NPS x 21⁄4" shank
•40" high with a 15" overhang
•Contains internal check valves
•1.42 GPM
•Conforms to the Energy Policy Act
of 2005
•Chrome-plated brass
•T&S no. B173
PLUMBING
PLUMBING
•20" flex lines
•11⁄8" OD x 21⁄4" shank
•39" high with a 12" overhang
•1.42 GPM
•Conforms to the Energy Policy Act
of 2005
•Chrome-plated brass
•T&S no. B111
No. 110-1074
Many items on this page are available
Lead-free Compliant.
Ask us about the item you need.
Phone: 800-257-7737
24-Hour Fax: 800-255-9866
517
PLUMBING
Wall mount pre-rinses
Pre-Rinse
by Fisher
No. 112-1001
• 1⁄2" NPT female inlet
•35" high with a 15" overhang
•Contains internal check valves
•1.6 GPM
•Conforms to the Energy Policy Act of 2005
•Chrome-plated brass
•Fisher no. 2710
ECONOMY PRE-RINSE
No. 107-1078
•1⁄2" NPT female inlet on 8" centers
•Contains check valves in wall flange coupling
•Conforms to the Energy Policy Act of 2005 when using the included water-saving spray face
•Chrome-plated brass
No. 106-1020 Replacement stem assemblies kit
ENCORE® SWIVEL ARM
PRE-RINSE
by CHG
No. 107-1074
Encore®
Pre-Rinse
by CHG
No. 107-1061
• 1⁄2" NPT female inlets on 8" centers
•34" high with a 15" overhang
•Contains internal check valves
•Conforms to the Energy Policy Act
of 2005 when using the included
water-saving spray face
•Chrome-plated brass
•Swivel arm allows a 360° rotation
• 1⁄2" NPT male inlets on 8" centers
•34" high with a 12" overhang
•Contains internal check valves
•Includes water-saving and conventional spray heads, wall bracket, and heavy-duty swivel arm bracket
•Conforms to the Energy Policy Act of 2005 when using the included water-saving spray face
•Chrome-plated brass
Water-Saving
Pre-Rinse
by Fisher
No. 112-1010
PLUMBING
• 1⁄2" NPT female inlets on 8" centers
•36" high with a 12" overhang
•1.6 GPM •Contains internal check valves
•Conforms to the Energy Policy Act of 2005
•Includes EZ Install inlet adaptor kit, a wall bracket
(No. 113-1029), and 2 EZ Install adaptors to
retrofit for Chicago, Encore, and Krowne
•Chrome-plated brass
•Fisher nos. 2210, 29459
Many items on this page are available
Lead-free Compliant.
Ask us about the item you need.
518
fmponline.com
PLUMBING
Wall mount pre-rinses
by T&S Brass
MINI PRE-RINSE
With Spout
Pre-Rinse
No. 110-1072
• 1⁄2" NPT female inlets on 8" centers
•34" high with a 15" overhang
•Pre-assembled with Easy-Install® fitting and locking nut
•Contains internal check valves
•1.42 GPM
•Conforms to the Energy
Policy Act of 2005
•Chrome-plated brass
•T&S no. B133
No. 110-1124
Swivel Arm Pre-Rinse
No. 110-1110
• 1⁄2" NPT female inlets on 8" centers
•34" high with a 15" overhang
•Contains internal check valves
•1.42 GPM
•Conforms to the Energy Policy Act of 2005
•Chrome-plated brass
•T&S no. B131
•8" spout
•1⁄2" NPT female inlets on 8" centers
•213⁄4" high with an 87⁄8" overhang
•Pre-assembled with Easy-Install® fitting and lock nut
•Contains internal check valves and ceramic cartridges
•Conforms to the Energy Policy Act of 2005
•Chrome-plated brass
•T&S no. MPZ8WLN068CR
LOW-FLOW
PRE-RINSES
by T&S BRASS
No. 110-1076
• 1⁄2" NPT female inlets on 4" centers
•34" high with a 15" overhang
•1.42 GPM
•Conforms to the Energy Policy Act of 2005
•Chrome plated brass
•T&S no. B163
No. 110-1122
• 1⁄2" NPT female inlets on 8" centers
•34" high with a 15" overhang
•Pre-assembled with Easy-Install® fitting and locking nut
•Contains internal check valves
• 1.2 GPM
•Chrome-plated brass
•T&S no. B0133C
PLUMBING
PLUMBING
Pre-Rinse
with Concealed
Mountings
Many items on this page are available
Lead-free Compliant.
Ask us about the item you need.
Phone: 800-257-7737
24-Hour Fax: 800-255-9866
519
PLUMBING
hose reels
Retractable
Hose Reel
by Fisher
Wall mount
utility sprays
No. 112-1003
•Covered reel with 30' hose and spray valve
•1.15 GPM
• 1⁄2" NPT female inlet
•41⁄2" x 7" mounting plate screw centers
•151⁄2" reel diameter
•17" projection
•Stainless steel outer cover
•Fisher no. 2985
Replacement Parts
No. 113-1074 30' hose
No. 113-1001 Black handle
Retractable
Hose Reel
by T&S Brass
ENCORE® tamperproof
SPRAY ASSEMBLY by CHG
No. 107-1076
•Designed for prison applications
•1⁄2" NPT female inlets on 8" centers
•72" stainless steel quick disconnect hose
•Quarter-turn full volume valves
•Includes plastic-coated wall hook
•Tamperproof screws throughout
•Conforms to the Energy Policy Act of 2005 when using the
included water-saving spray face
No. 110-1001
•Covered reel with 30' hose
• 3⁄8" NPT female inlet
•51⁄2" x 67⁄16" mounting plate
•Includes spray valve
•1.42 GPM
•141⁄4" reel diameter
•151⁄2" projection
•Conforms to the Energy Policy Act of 2005
•T&S Brass nos. B1400, B7222C01
Replacement Parts
No. 111-1016 35' hose
No. 111-1130 Gray handle
No. 111-1032*Spray valve
*Conforms to the Energy Policy Act of 2005
Retractable
HOSE REEL
No. 110-1125
PLUMBING
•Exposed reel with 50' hose and
spray valve
•3⁄8" NPT female inlet
•191⁄2" diameter of reel
•Hose rating 300 PSI maximum,
176°F maximum
•Includes wall mounting bracket
•Black powder-coated steel
520
Wall mount faucet and Spray
Assembly by T&S Brass
No. 110-1080
• 1⁄2" NPT female inlets on 8" centers
•12" spout and 96" stainless steel hose
•Contains internal check valves
•1.42 GPM
•Conforms to the Energy Policy Act of 2005
•Chrome-plated brass
•T&S no. B175
fmponline.com
PLUMBING
Parts & Accessories for CHG Encore® Pre-Rinses
select-a-spray™
adjustable
SPRAY head
No. 106-1165
•5 different spray patterns to
choose from: Full, Shower, Jet, Center,
or Mist
•Fits standard pre-rinse hose
Full
3.1 GPM
Shower
2.8 GPM
Jet
1.7 GPM
Center
2.1 GPM
Pre-Rinse Hoses
with Handles
Mist
.18 GPM
SWIVEL JOINT
No. 106-1164
•Black plastic handle and all necessary washers included
•Built-in stress reducing spring for greater
durability
•Strong, flexible stainless steel outer casing over a reinforced radial design rubber core
No.
No.
No.
No.
106-1078
106-1151
106-1152
106-1153
44"
60"
72"
96"
No. 106-1099
long
long
long
long
Black plastic handle only
•For swivel arm pre-rinses
•21⁄2" L x 117⁄32" W
No. 106-1104 Teflon® washer only (not shown)
•For use between spring body adaptor and hose,
and between hose and handle
Add-On
Swing Faucets
Water Saver Spray Face
Pre-Rinse Spray Valve
•Fits standard pre-rinse hose
•1.6 GPM
•For use with pre-rinse assemblies
•3⁄8" NPT male inlet x 3⁄8" NPT female outlet
•“No splash” aerator included
No. 107-1064 6" spout
No. 107-1063 16" spout
No. 107-1062 12" spout
No. 106-1158
•Replaces standard spray face to save water and energy
•For pre-rinse spray valve
•1.6 GPM
•Knife spray pattern
Note: Conforms to the Energy Policy Act of 2005
and the ASTM F-2324 standard for water
conservation.
Angled Pre-Rinse Spray
Valve
Pot Filler Valve
No. 106-1156
No. 106-1157
Wall Hook
•Fits standard pre-rinse hose
•3.2 GPM
•Fits standard pre-rinse hose
No. 106-1154
Phone: 800-257-7737
PLUMBING
PLUMBING
No. 106-1077
•Permits spray valve or pot filler valve to be
conveniently hung in place when not in use
•Chrome-plated base with vinyl-coated hook
24-Hour Fax: 800-255-9866
521
PLUMBING
Parts & Accessories for CHG Encore Pre-Rinses
11
2
17
18
9
12
3
10
13
20
1
4
19
14
21
16
22
15
23
24
Pre-Rinse Full-turn
Stem Parts
6
5
REF
No. ITEM No.
7
8
Pre-Rinse Parts
9.
10.
10.
11.
11.
12.
13.
14.
14.
15.
16.
106-1147
106-1123
106-1124
106-1108
106-1112
106-1109
106-1110
106-1111
106-1113
106-1129
106-1128
DESCRIPTION
Cold/hot handle assembly
Cold stem assembly (full-turn)
Hot stem assembly (full-turn)
Cold stem
Hot stem
Spring
Brass backcheck with seat
washer and screw
Cold removable insert
Hot removable insert
Teflon® seat gasket
Coupling flange washer
Spray Valve Parts
REF
No. ITEM No.
17.
18.
19.
20.
21.
22.
23.
24.
106-1091
106-1090
111-1064
111-1054
106-1155
106-1115
106-1130
111-1089
DESCRIPTION
Hold-down ring
Squeeze valve handle (includes screw and barrel nut)
Bonnet spring
Binding washer
Button valve assembly
Rubber ring
Spray face (black)
Spray face screw
REF
No. ITEM No.DESCRIPTION
1.
2.
3.
3.
4.
5.
6.
7.
8.
PLUMBING
522
111-1087
111-1101
106-1120
106-1100
106-1101
106-1121
106-1105
106-1122
106-1127
Spring
Spring body
18" riser tube
24" riser tube
Finger hook and screw
Deck mount faucet base
Washer
Spreader assembly
Wall mount faucet base
QUarter-TURN STEM
ASSEMBLIES
Wall Bracket
•Can be used to retrofit existing full-turn faucets
No. 106-1076
No. 106-1162 Cold
No. 106-1163 Hot
•Can be cut to mount a pre-rinse from 2" to 12" from the wall
fmponline.com
PLUMBING
Parts & Accessories for CHG Encore Pre-Rinses
Hose Adaptor
No. 106-1150
1
Adjustable Supply Inlets
Permits easy, fast installation by providing
adjustability of different faucet or pre-rinse centers
to match varying installation centers.
•Adapts CHG or T&S hose to Fisher spring body on top of the riser tube
•Chrome-plated brass
No. 106-1159
2
4" Wrist Blade Set
and Cover
1. No. 106-1136 Wrist blades only
•For new 20-tooth spline design
•Treated with Saniguard® antimicrobial
coating
•Includes index buttons and screws
•Chrome-plated brass
•2" total range
• 1⁄2" NPT female inlets
•Chrome-plated brass
•Coupling flange washers included
•Includes deck mount kit (No.117-1137)
Swing to Rigid
Spout Adaptor
No. 106-1149
•Converts a standard swivel spout
to a 3⁄8" NPT riser pipe
•Chrome-plated brass
2. No. 106-1173 Handle cover only
•Sold individually
3
4
Spout Adaptors
Faucet Handle Repair Kit
No. 106-1147
•For Encore hot or cold water handle assemblies
•Kit includes: handle, blue index disk, red index
disk, and handle screw
•Chrome-plated brass
•Sold individually
Inlet
Nipple Kit
No. 117-1009
•For installing faucets in a standard 2" backsplash
•Converts female inlets to male
•Kit includes: two 1⁄2" NPS x 11⁄2" brass nipples with
lock nuts and washers, two 1⁄2" NPT x 1⁄2" sweat
brass elbows
3.No. 106-1119 3⁄8" NPT female to spout thread
• Spout can be added to the top of a riser pipe
4.No. 106-1118 3⁄8" NPT male to spout thread
• Spout can be added to a pre-rinse faucet base
Watts Backflow
Preventer
No. 117-1052
Full-Turn Faucet
Repair Kits
•Kit includes 1 each: stem, removable insert,
brass backcheck with seat washer and screw;
2 each: seat washers and seat washer screws;
3 each: packings, top gaskets, bottom gaskets,
backcheck springs; 4 each: spout O-rings
No. 106-1145
No. 106-1146
Cold water valve
Hot water valve
Phone: 800-257-7737
Deck Mount Kit
No. 117-1137
•For simple installation of deck faucets and pre-rinses
•Converts female inlets to male
•Kit includes: 2 each of 1⁄2" NPS x 2" long
nipples, washers, and lock nuts
24-Hour Fax: 800-255-9866
Double Backflow
Preventer
No. 113-1081
•For use between the pre-rinse
hose and spray valve
•2 check valves ensure safety in
case one fails
• 3⁄4-14 thread female inlet
• 3⁄4-14 thread male outlet
•Chrome-plated brass
523
PLUMBING
PLUMBING
•For use on bottom of pre-rinse
riser tubes
•3⁄8" NPT male inlet
•3⁄8" NPT female outlet
•Rated 125 PSI for water
•Chrome-plated brass
PLUMBING
Parts & Accessories for Chicago Pre-Rinses
12
13
1
2
Quarter-turn Handles and
Stem Assemblies
Handles
12. No. 115-1013 Cold handle
13. No. 115-1014 Hot handle
15
3
4
14
Quaturn XT Stem Assemblies
14. No. 115-1009 Cold– 1 identifier ring
15. No. 115-1008 Hot– 2 identifier rings
5
6
7
8
“Adapta” Faucet
4" Wrist Blades
No. 115-1004
No. 115-1012
•9 spout
• 3⁄8" NPS female outlet
•Chrome-plated brass
•Chicago spout thread inlet
•Chicago no. 613A
•Includes screws and index buttons
•Chrome-plated brass
•Sold by the pair
Pre-rinse wall
bracket
Watts Backflow Preventer
No. 106-1076
•For use on riser tubes of pre-rinse units
• 3⁄8" NPT male inlet
• 3⁄8" NPT female outlet
•Rated 125 PSI for water
•Chrome-plated brass
1
9
10
10
11
11
⁄2"
Pre-Rinse Parts
REF
No. ITEM No.
PLUMBING
1.
2.
3.
4.
5.
6.
6.
7.
8.
9.
10.
11.
DESCRIPTION
111-1087
115-1031 115-1030*
115-1022
115-1019
106-1100
111-1110
115-1028
115-1023
Spring
44" hose with handle
Spray valve
Spring body
Hook
24" riser tube
32" riser tube
Pre-rinse riser adaptor
Base faucet – includes two 3
⁄8" OD x 121⁄4" threaded
copper tubes
115-1029 Mixing yoke
115-1000 Tailpiece with check valve
111-1151 Tailpiece nut
*Conforms to the Federal Energy Policy Act of 2005
524
•Can be cut to mount a pre-rinse 2" to 12" from the wall
•For 3⁄8" NPT riser pipe
No. 117-1052
fmponline.com
PLUMBING
Parts & Accessories for Fisher Pre-Rinses
Hose and
Spray Valve
No. 113-1082
•Contains: Spray valve (No. 113-1052)
36" pre-rinse hose (No. 113-1041)
Spray valve handle (No. 113-1040)
•1.15 GPM
•Conforms to the Energy Policy Act of 2005
•Fisher no. 2911
Pot Filler Valve
No. 113-1013
•Fisher no. 2921
Brush Attachment
No. 113-1054
•For new style spray valves
•Used on Fisher spray valves with 2" OD bumpers
Water-Saving Spray Valve
No. 113-1052
•Conserves water and saves energy
•1.15 GPM
•Conforms to the Energy Policy Act of 2005
•Fisher no. 2949
Pre-Rinse Hoses
No. 113-1043 18" hose
No. 113-1041 36" hose
No. 113-1042 60" hose
Adaptors
No. 113-1047 Adapts Fisher hose to T&S spray valve handle
Jet Spray Valve
Handle with Gaskets
Gasket
No. 113-1051
No. 113-1040
No. 113-1091
•For all Fisher pre-rinse handles, hoses,
and spray valves
•Ideal for wash-down and clean-up use
•1.15 GPM
•Fisher nos. 2938, 10863
Phone: 800-257-7737
PLUMBING
PLUMBING
No. 113-1046 Adapts Fisher hose to T&S spring body
24-Hour Fax: 800-255-9866
525
PLUMBING
Parts & Accessories for Fisher Pre-Rinses
8
7
5
5
8
6
1
10
9
Spray Valve Parts
REF
No. ITEM No.
2
5.
6.
7.
8.
9.
10.
3
113-1038
113-1091
113-1004
113-1053
113-1056
113-1039
DESCRIPTION
Screw
Gasket
Spray disk nozzle
2" diameter black bumper
Spray disk
Repair kit for Fisher spray valves
4
Pre-Rinse Parts
REF
No. ITEM No.
1.
2.
3.
4.
111-1087
113-1048
113-1049
113-1050
DESCRIPTION
Spring
Hook
Spring body
Riser–213⁄4"
PLUMBING
Stem Assemblies
•Comes with hot and cold index buttons, handle,
screw, and bonnet
• 1⁄2" NPT stem assembly
•Includes internal check valves
No. 113-1024
No. 113-1025
526
Deck Mount
Base Faucet
Left-hand
Right-hand
No. 113-1026
Handle
No. 113-1023
•Comes with hot and cold index buttons
and screw
•Chrome-plated brass
•Sold individually
• 3⁄8" NPT female outlet
•11⁄16" OD x 2" shank
• Two 16" long flexible braided
steel inlets
•Two 3⁄8" OD compression x 1
⁄2" male NPT adaptor
•Contains internal check valves
•Fisher nos. 2100CV, 13080
Wall Mount Base Faucet
No. 113-1028
•8" centers
• 1⁄2" NPT female inlets
• 3⁄8" NPT female outlet
•Includes internal check valves
•Fisher no. 2200CV
fmponline.com
4" Wrist Blade
No. 113-1002
•Comes with hot and cold index buttons
•Chrome-plated brass
•Sold individually
PLUMBING
Parts & Accessories for Fisher Pre-Rinses
1
2
Spout Adaptors
1. No. 113-1021 Fisher spout thread female inlet to 3⁄8" NPT female outlet
• Converts faucet base to pre-rinse
2. No. 113-1022 3⁄8" NPT male inlet to Fisher spout thread male outlet
• Converts pre-rinse base to faucet base
Add-On
Pre-Rinse Faucets
•Can be used with most pre-rinse assemblies
• 3⁄8" NPT male inlet x 3⁄8" NPT female outlet
•Chrome-plated brass
•Fisher 2901 series
No. 112-1013 6" spout
No. 112-1012 12" spout
No. 113-1086 Replacement stem assembly only
wall adaptor Elbow
No. 113-1083
•Use to connect wall mount faucet or pre-rinse to supply line*
•Will fit within a standard 2" backsplash
• 1⁄2" NPT female inlet and outlet
•Brass
* 1⁄2" NPT nipple kits (Nos. 117-1137, 117-1009)
may be required with most wall mounted faucet
and pre-rinse applications.
SUPPLY LINE
No. 113-1084
•36" long, braided stainless steel
• 1⁄2" NPT female x 1⁄2" NPT male fittings
Gooseneck Swivel
No. 113-1090
•For use on swivel pre-rinses
•Can also convert a standard pre-rinse
into a swivel
•Chrome-plated brass
•Fisher no. 2011-0000
Watts
Backflow
Preventer
Double Backflow
Preventer
Wall Bracket
No. 113-1081
No. 113-1029
•For use between the pre-rinse hose and spray valve
•2 check valves ensure safety in
case 1 fails
• 3⁄4 -14 thread female inlet
• 3⁄4 -14 thread male outlet
•Chrome-plated brass
•For 3⁄8" NPT riser pipe
•Adjustable from 21⁄4" to 12"
•Adjustment is measured from wall to center line of riser
•For use on bottom of pre-rinse riser tubes
•3⁄8" NPT male inlet
•3⁄8" NPT female outlet
•Rated 125 PSI for water
•Chrome-plated brass
PLUMBING
PLUMBING
No. 117-1052
Wall Hook
No. 113-1014
•For pre-rinses and pot hooks
•Chrome-plated brass with vinyl-coated hook
Phone: 800-257-7737
24-Hour Fax: 800-255-9866
527
PLUMBING
Parts & Accessories for T&S Brass Pre-Rinses
Pre-Rinse Hoses
•Includes gray handle and all necessary washers
•Overall length includes 8" gray handle
Hose And valve Spray
No. 110-1078
• 1⁄2" NPS male inlet
•48" overall length
•Includes: Spray valve (No. 111-1032)
44" pre-rinse hose (No. 111-1045)
1
⁄2" NPT adaptor fitting (No. 111-1124)
•1.42 GPM
•Conforms to the Energy Policy Act of 2005
•T&S Brass no. B100
No.
No.
No.
No.
No.
No.
No.
111-1039
111-1041
111-1168
111-1045
111-1048
111-1050
111-1046
20" long
26" long
32" long
44" long
68" long
96" long
44" long with vacuum breaker (not shown)
Parts
No. 111-1100 Gray handle
No. 111-1097 Rubber washer (not shown)
•For use between spring body and adaptor
•For use between handle and valve
•5⁄8" OD
No. 111-1093 Rubber washer (not shown)
•For use between spring body adaptor and hose
•For use between hose and handle
•3⁄4" OD
Hose and Water-Saving
Spray valve
No. 111-1165
• 1⁄2" NPS male inlet
•48" overall length
•Includes: Water-saving spray valve (No. 111-1033)
44" pre-rinse hose (No. 111-1045)
1
⁄2" NPT adaptor fitting (No. 111-1124)
•1.24 GPM
•T&S Brass no. B100C
PVC Pre-Rinse Hose
No. 111-1154
•Braided, reinforced PVC covering
•44" long
•Includes gray handle and all necessary washers
PLUMBING
Pot Filler
No. 111-1096
•Fits T&S Brass pre-rinse hose
•T&S Brass no. 2851-40 (old no. 26A)
528
fmponline.com
PLUMBING
Parts & Accessories for T&S Brass Pre-Rinses
Pre-rinse
Spray Valve
No. 111-1182
•Conserves water and saves energy
•1.48 GPM
•Conforms to the Energy Policy Act of 2005
•Built-in backflow prevention
•T&S Brass no. B0108
1
2
Swivels
1. No. 111-1088 Swivel arm assembly
•For use on pre-rinses No. 110-1071 and No.
110-1110
•12" long
Water-Saving
Spray Valve
No. 111-1033
2. No. 111-1103 Swivel adaptor
•For use on faucet and spray assembly No. 110-1080.
•Conserves water and saves energy
•1.24 GPM
•Conforms to the Energy Policy Act of 2005
and the ASTM F-2324 standard for water
conservation.
•T&S Brass no. B107C
No. 111-1095 Replacement shield for water-saving valves
Add-On Swing Faucets
•For use with pre-rinse assemblies
• 3⁄8" NPT male inlet and 3⁄8" NPT female outlet
•Chrome-plated brass
Angled Water-Saving
Spray Valve
ITEM No.
SPOUT
No. 111-1008
110-1083
110-1081
110-1082
6" 12"
18"
T&S BRASS No.
•Nozzle is at a 35° angle
•Conserves water and saves energy
•1.24 GPM
•Conforms to the Energy Policy Act of 2005 and the ASTM F-2324
standard for water conservation
•T&S no. B107C35
B155M
B156M
B157M
No. 111-1090 Replacement stem assembly
No. 111-1175 EasyInstall® adaptor
No. 111-1095 Replacement shield for water-saving valves
Standard Spray
Valve
Spray Valve
Repair Kits
No. 111-1032
•For spray valves (Nos. 111-1032 and 111-1159)
•Kit includes: 2 each: bonnet binding washers, bonnet springs, bonnet
washers, hose washers, valve stems, packings, seat washers; contains
1 each: rubber ring, spray face, spray face screw
•Conforms to the Energy Policy Act of 2005
•T&S Brass no. B10K
Brush Attachment
No. 111-1021
•Fits spray valves (Nos. 111-1032 and 111-1159)
•Supplied with rubber collar and brush
•T&S no. BR10
Phone: 800-257-7737
•1.42 GPM
•Conforms to the Energy Policy
Act of 2005
•T&S Brass no. B107
Angled Standard
Spray Valve
PLUMBING
PLUMBING
No. 111-1034
No. 111-1159
•Nozzle is at a 35° angle
•1.42 GPM
•Conforms to the Energy Policy Act of 2005
•T&S nos. 25A, B-0107-035
24-Hour Fax: 800-255-9866
529
PLUMBING
Parts & Accessories for T&S Brass Pre-Rinses
2
EasyInstall® Pre-Rinse
3
Assembly Parts
1
4
5
7
8
6
9
9
10
11
8
REF
No. ITEM No.
DESCRIPTION
1.
2. 3. 3. 3. 4. 5. 6.
7. 8. 9. 10.
11.
Spring
Spring body
18" riser tube
24" riser tube
32" riser tube
Finger hook and screw
EasyInstall® adaptor
Wall mount base faucet with coupling
Deck mount base faucet with coupling
Washer
Coupling with washer
Deck mount base faucet
Water inlet hoses (2)
111-1087 111-1101 106-1120 106-1100 111-1110 111-1119 111-1175 111-1181
111-1180 111-1079 111-1084 111-1118*
111-1183
*This faucet uses water inlet hoses (No. 111-1183)
13
Pre-Rinse Assembly Parts
REF
No.
14
12
15
20
21
PLUMBING
16
17
2.
1
13. 14. 14. 14. 15. 16.
17.
18.
19.
20.
21.
22.
ITEM No.
111-1087
111-1101
106-1120
106-1100
111-1110
111-1119
111-1063
111-1083
111-1150
111-1151
111-1121
111-1079
111-1084
22
18
19
530
fmponline.com
DESCRIPTION
Spring
Spring body
18" riser tube
24" riser tube
32" riser tube
Finger hook and screw
Washer
Spreader assembly
Tailpiece
Tailpiece nut
Wall mount base faucet
with coupling
Washer
Coupling with washer
PLUMBING
Parts & Accessories for T&S Brass Pre-Rinses
12
11
REF
No. ITEM No.
Cold stem assembly (full-turn with check valve)
Hot stem assembly (full-turn with check valve)
2. 111-1132 Seat gasket
3. 111-1135 Cold insert
3. 111-1178** Cold insert (Monel seat)
3. 111-1133 Hot insert
3. 111-1179** Hot insert (Monel seat)
4. 111-1167 Spring check seat
5. 106-1109 Spring
6. 106-1108 Cold stem
6. 106-1112 Hot stem
7. 111-1134 Bonnet gasket
8. 111-1106 Bonnet
9. 111-1113 Packing
10. 111-1114 Packing nut
11. 111-1147 Cold handle assembly
11. 111-1075 Hot handle assembly
12. 111-1071 Cold index button
12. 111-1072 Hot index button
13. 111-1094 Handle screw
14. 111-1085
Seat washer–for older stems
15. 111-1091 Seat screw–for older stems
8
7
1
6
5
4
14
3
15
REF
No.
ITEM No.
16.
17.
111-1172
111-1171
DESCRIPTION
Cold stem assembly
(quarter-turn)
Hot stem assembly
(quarter-turn)
16
17
** Monel seat can withstand higher temperatures
and hard water
2
Spray Valve Parts
26
30
27
24
21
23
20
25
28
19
18
DESCRIPTION
111-1146
111-1073
1.
1.
Ceramic Cartridges
with check valves
29
22
20
31
32
37
33
36
34
35
38
REF
No.
ITEM No.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
33.
34.
35.
36.
37.
38.
111-1066
111-1064
111-1059
111-1140
111-1054
111-1144
111-1057
111-1138
111-1082
111-1068
111-1070
111-1076
111-1097
111-1131
111-1120
111-1112
111-1161
111-1053*
111-1089
111-1086
111-1141
111-1095
DESCRIPTION
Push-button
Bonnet spring
Bonnet washers
Bonnet body
Binding washer
Seat washer
Stem with packing
Squeeze valve body
Hold-down ring
Squeeze valve handle
Handle screw
Handle nut
Hose washer
Short pipe
Spray cup
Thin rubber ring
Thick rubber ring (new style)
Spray face
Spray face screw
Spray face assembly
Complete bonnet assembly –
includes 18 through 24
Shield for water-saving
spray valves
PLUMBING
PLUMBING
9
Eterna Pre-Rinse Stems
and Parts
13
10
*Conforms to the Energy Policy Act of 2005
Phone: 800-257-7737
24-Hour Fax: 800-255-9866
531
PLUMBING
Parts & Accessories for T&S Brass Pre-Rinses
2
1
T-40 Upgrade Kit
4
No. 111-1009
•Can be added to most pre-rinses, including
competitive models with a 3⁄8" NPT riser
•21" overhang
•Does not include mixing valve or hose
Parts
REF
No. ITEM No.
1.
2.
3.
4.
5.
6.
111-1005
111-1017
106-1100
111-1002
111-1048
111-1008*
2
DESCRIPTION
3
Hose balance–with hose clamps
Wall bracket
24" lower riser tube
3
⁄8" NPT vacuum breaker
68" hose with handle
Angled water-saving spray valve
5
6
*Conforms to the Energy Policy Act of 2005 and the
ASTM F-2324 standard for water conservation.
7
Repair Kits
7.
No. 111-1152 Knuckle joint assembly
• T&S Brass no. 9228-40
• Kit includes: 1 shaft,
1 end cap, 1 sleeve,
1 loctite pack and lubricant;
2 bearings;
4 O-rings
8.
No. 111-1153 Elbow joint assembly
• T&S Brass no. 9227-40
• Kit includes: 1 swivel elbow assembly, 1 loctite pack and lubricant;
2 end caps,
2 bearings;
4 O-rings
8
PLUMBING
532
fmponline.com
PLUMBING
Parts & Accessories for T&S Brass Pre-Rinses
Backflow
Preventer
No. 111-1013
•3⁄4" garden hose female inlet
•3⁄4" garden hose female outlet
•Rated 125 PSI for water
•Chrome-plated brass
1
Wall Hook
No. 113-1014
•For pre-rinse and pot hooks
•Chrome-plated brass with vinyl-coated hook
Spout
Adaptors
2
1. No. 111-1042 Spout adaptor
• Converts pre-rinse base to faucet base
2. No. 111-1043 Spout adaptor
• Converts faucet base to pre-rinse base
Watts
Backflow
Preventer
No. 111-1012
•For use with T&S Brass
•For use on either side of pre-rinse hose
• 3⁄4-14 thread female inlet
• 3⁄4-14 thread male outlet
•Chrome-plated brass
•T&S no. B971
Hose Adaptors
•Fits T&S 3⁄4 -14 pre-rinse hose thread
Pre-Rinse Wall Brackets
•Length shown above is the distance from the wall to the center line of the riser tube
•Can be cut in the field
•For 3⁄8" NPT riser pipe
•T&S no. B109 series
Watts
Backflow
Preventer
No.
No.
No.
No.
No.
No.
111-1122 3⁄8" NPT male
111-1123 3⁄8" NPT female
111-1124 1⁄2" NPT male
111-1125 1⁄2" NPT female
111-1126 3⁄4" NPT male
111-1129 Garden hose female
No. 111-1017 Adjusts from 2" to 6 3⁄4" long
No. 111-1018 Adjusts from 2" to 12 3⁄4" long
No. 111-1019 Adjusts from 2" to 18 3⁄4" long
No. 117-1052
•For use on bottom of pre-rinse riser tubes
• 3⁄8" NPT male inlet
• 3⁄8" NPT female outlet
•Rated 125 PSI for water
•Chrome-plated brass
No. 111-1166
No. 113-1081
•For use between the pre-rinse hose and spray valve
•2 check valves ensure safety in case one fails
• 3⁄4 -14 thread female inlet
• 3⁄4 -14 thread male outlet
•Chrome-plated brass
•Used to connect wall mount faucet or pre-rinse to supply line
•Will fit within a standard 2" backsplash
• 1⁄2" NPT female inlet and outlet
•Brass
Phone: 800-257-7737
24-Hour Fax: 800-255-9866
EASYINSTALL®
adaptor kit for
PRE-RINSE BASES
No. 111-1175
PLUMBING
PLUMBING
Elbow
Double
Backflow
Preventer
• Used to retrofit 3⁄8" NPT riser tube into existing EasyInstall pop and lock pre-rinse base faucet
•T&S no. EZ-K
533
PLUMBING
dipperwells & accessories
Dipperwell
Installation Kit
No. 117-1152
• For use with side mounted dipperwell (No. 117-1151)
• Kit includes all the components for water
line and drain connections
SIDE MOUNTED
dipperwell
10"
No. 117-1151
•Can be attached to the side of an ice cream cabinet or soda fountain
•10" W x 6" H x 3" D
•5⁄8" OD rubber bumper allows excess water to be tapped off
•1⁄4" inlet tube with adaptor
•Includes 1" NPS drain, overflow tube, and mounting screws
•Stainless steel
Side Mounted Dipperwell
No. 117-1060
PLUMBING
•Can be attached to the side of an ice cream
cabinet or soda fountain
•Includes stainless steel shut-off valve at the base of inlet tube
•Includes overflow tube
11"
• 1⁄4" flare male inlet
•1" NPS drain
•2 GPM maximum output
4"
•Stainless steel
replacement
Overflow Tube
6"
No. 117-1153
• For use with side mounted dipperwell (No. 117-1151)
• Brass
replacement
Overflow Tube
replacement Faucet
No. 117-1135
•For use with dipperwell (No. 117-1060)
• 1⁄4" flare male inlet
•Stainless steel
No. 117-1136
•For use with dipperwell (No. 117-1060)
•1" OD x 215⁄16" H
•White PVC
Many items on this page are available
Lead-free Compliant.
Ask us about the item you need.
534
fmponline.com
PLUMBING
dipperwells & accessories
DIPPERWELL Faucet
with Long Shank
DIPPERWELL Standard
Faucet
No. 107-1034
No. 107-1033
• 1⁄2" NPS x 21⁄2" shank
•5⁄16" ID sweat inlet connection
•Chrome-plated brass
•1⁄2" NPS x 13⁄8" shank
•1⁄4" NPT male inlet
•Chrome-plated brass
No. 106-1172 Replacement stem assembly with handle
No. 106-1166 Replacement stem assembly with handle
Dipperwell Assemblies
•Will fit a 51⁄2" or 6" hole
•7" outside diameter of finished edge
•53⁄4" overall height
•11⁄2" NPS stainless steel drain
•Stainless steel inner and outer can
No. 117-1129
•Dipperwell with faucet (No. 107-1033)
No. 117-1130
•Dipperwell with faucet (No. 107-1034)
No. 117-1127
•Dipperwell only
No. 117-1126 Replacement inner can
See why the
Accusharp®
Knife Sharpener
See page 465 for
more information.
Dipperwell Assembly
No. 112-1041
•Fits a 6" hole
•7" outside diameter of finished edge
•11⁄2" NPS drain
• 1⁄8" NPT inlet tube with adaptor
•Includes 11⁄2" x 4" plastic tailpipe
•Stainless steel
• For Fisher dipperwell model 3041
• 3⁄8" NPS x 13⁄4" shank
• Chrome-plated brass
No. 117-1242
No. 117-1243 Replacement needle valve (not shown)
• 1⁄8" NPT inlet and outlet
Many items on this page are available
Lead-free Compliant.
Ask us about the item you need.
Phone: 800-257-7737
24-Hour Fax: 800-255-9866
535
PLUMBING
PLUMBING
is one of our
top selling
items!
DIPPERWELL FAUCET
by fisher
PLUMBING
dipperwell
SPADEWELL ICE CREAM SPADE
CLEANING WELL by NEMCO®
Larger size to more easily accomodate ice cream spades.
Features user-friendly rounded corners and a rubber bumper that
provides protection and sound deadening when removing water
from spades.
No. 400-1024
• Models 77316-19, 77316-19-2
• 73⁄4" H x 191⁄4" W x 57⁄8" D
• 1⁄4" NPT inlet tube
•11⁄2" NPS drain
• Includes drain tube, ball valve, compression fitting, and
mounting hardware
• Stainless steel
Divider sold separately.
Do not install well into food
zone or sink compartment.
fountain & beer faucet accessories
Slotted Type
Disconnect
No. 104-1068
SANI-TAP GERMICIDAL
DRIP PAN STRIPS
Say good-bye to foul odors with these deodorizing
and disinfecting strips. They control odors from
mildew, fungi, algae, and slime. They even reduce
the presence of fruit flies. Last up to 3 weeks!
No. 102-1158
PLUMBING
•Used in beer tap and soda dispenser drip pans,
and floor drains
•Can also be used in other areas, such as
refrigerator drain pans and urinals
•Helps prevent drain overflows
•5" x 11⁄2" x 1⁄2" (127mm x 38mm x 13mm)
•Controlled release
•Pack of 10
536
Swirl Hoses™
with Street Elbows
by Dormont®
•For connecting foodservice equipment to a water
supply such as ice machines, coffee makers, etc.
•48" long (extended)
•160° maximum working temperature
•100 PSI
•Includes street elbow
•Spiral polyurethane tubing with brass fittings
No. 117-1139 1⁄4" ID hose
• 1⁄4" NPT male x 1⁄4" NPT female fittings
No. 117-1140 3⁄8" ID hose
• 3⁄8" NPT male x 3⁄8" NPT female fittings
•For gas – 2 slots
• 1⁄4" male flare
•Plastic
Flare Fitting
for 1⁄4" ID hose
No. 117-1141
• 1⁄4" NPT male x 1⁄4" female flare fitting
No. 157-1116 1⁄2" ID hose
• 1⁄2" NPT male x 1⁄2" NPT female fittings
fmponline.com
PLUMBING
fountain & beer faucets
Beer Tower
No. 104-1073
•21⁄2" diameter
•141⁄2" high
•9" deck to spout tip
•48" tubing with 29⁄32 -14 standard
beer thread female inlet
•Handle not included
•Chrome-plated brass
No. 130-1000
•23⁄4" long
Handle only
Beer Faucets
•Fits standard beer shank
No. 104-1006
No. 104-1007
Chrome-plated faucet only
Brass faucet only
No. 130-1000 Handle only
•Fits above faucets
•23⁄4" long
Fountain Draft Arms
•Handle positions for both coarse and fine streams
• 1⁄2" NPS x 3" shank
• 1⁄4" ID hose barb inlet
•151⁄4" high
• 5⁄16 -18 handle stud
•Chrome-plated brass
No. 104-1070
No. 104-1071
Soda
Water
Note:Soda arm (No. 104-1070) is for carbonated water only, not syrup mixed sodas.
Parts
Faucet wrench
Repair kit
•Contains 1 of each: adjusting screw, tumbler
backing, soda and water tumbler, soda and
water washer, soda spray washer
Tap Lock
PLUMBING
PLUMBING
No. 142-1127
No. 104-1079
No. 104-1072
•Special lock for beer faucets
•Includes 1 key
Phone: 800-257-7737
24-Hour Fax: 800-255-9866
537
PLUMBING
Tomlinson S series Faucets
Faucet
No. 286-1008
•11⁄32 -14 male thread
•Plastic
•Tomlinson nos.
1018305, SPB
No. 178-1001
•Wing nut only
Faucets
Faucet
No. 286-1007
•11⁄32 -14 male thread
• ⁄8" NPS x ⁄2" shank
•Plastic
•Tomlinson nos. 1000669, SPBH
No. 286-1005 Chrome-plated brass
•Tomlinson nos. 1018647, SC
3
1
No. 286-1018 Chrome-plated brass with
plastic bonnet (not shown)
•Tomlinson nos. 1000437, S
No. 190-1184 Chrome-plated brass with red plastic handle marked "water"
•Tomlinson no. 1000528
Carrier Faucets
• 7⁄8 -14 wing nut mounting
No. 286-1009 Chrome-plated brass
•Tomlinson nos. 1000600, SCM
No. 286-1010 Plastic
•Tomlinson nos. 1000690, SPBM
No. 242-1005
Wing nut washer only
Faucet
Faucets with Clean-Out Cap
No. 286-1015
PLUMBING
•Commonly used on Colony, Enterprise, Westbend, and others
• 1⁄2" NPS male inlet
•Fits all 3⁄8" NPS union nut shanks
•Plastic
•Tomlinson nos. 1000650, SPB-3⁄8"
No. 286-1017 Chrome-plated brass
•11⁄32 -14 male thread
•Tomlinson nos. 1000583, SC1
Trip Cup Dispensing Faucet
No. 286-1019 Chrome-plated brass with
plastic bonnet (not shown)
•11⁄32 -14 male thread
•Tomlinson nos. 1000476, S1
No. 286-1011
•11⁄32 -14 male thread
•Chrome-plated brass
•Tomlinson nos. 1000725, TSC
538
fmponline.com
PLUMBING
Parts for S Series Tomlinson Faucets & Others
2
1
3
4
5
Repair Kit for Pinless
Faucet
Pinless Upper Assembly
No. 287-1016
•Includes 1 of each: black handle, plastic
bonnet, spring, stem, and seat cup
•Kit includes: 1 of each: spring, stem,
and seat cup
No. 287-1014
7
6
8
Faucet Parts
REF
No. ITEM No.
DESCRIPTION
Old Style Pinned Handles
1.
3.
4.
5.
6.
8.
287-1009
287-1017
287-1019
287-1020
287-1021
287-1022
Repair Kit for Pinned
Faucet
Pinned Upper Assembly
No. 287-1015
•Includes: 1 of each: black handle, pin, chrome bonnet, spring, stem, and seat cup
•Kit includes: 1 of each: pin, spring, stem,
and seat cup
No. 287-1025
Black handle
Pin
Plastic bonnet
Spring
Stem
Seat cup
2.
4.
5.
7.
8.
287-1011
287-1019
287-1020
287-1013
287-1022
Black handle
Plastic bonnet
Spring
Stem
Seat cup
Seat Cups
Plain Shank
No. 287-1026 Small size
• 13⁄16" top diameter
No. 287-1007
No. 287-1027 Medium size
• 15⁄16" top diameter
No. 287-1022 Large size
•11⁄4" top diameter for S and SP series faucets
Phone: 800-257-7737
24-Hour Fax: 800-255-9866
PLUMBING
PLUMBING
New Style Pinless Handles
•Fits standard union nut faucets
•1⁄2" NPS male inlet
•11⁄32-14 female thread outlet
•Chrome-plated brass
•Tomlinson no. A16C
539
PLUMBING
specialty faucets & assemblies
Small Size Percolator Faucet
1
No. 286-1013
•Commonly used on Westbend
• 1⁄2 -20 x 5⁄16" shank
•23⁄4" overall length
•Plastic
•Tomlinson no. HPSBCI
Crock Faucet
Faucets
2
1.No. 262-1096
•For Rubbermaid ® Brute Greenskeeper
•Rubbermaid no. 2624L3
2.No. 262-1020
•For Rubbermaid ® models 3358, 3359,
3 gal and 5 gal beverage dispensers
•Rubbermaid no. 3358L6
No. 286-1000
•For earthenware crocks and thick walled containers
• 3⁄4 -16 x 11⁄4" threaded shank
•Plastic
•Tomlinson nos. 1000134, 1000145, 1000160,
HFSG
No. 287-1041 Nut
• 3⁄4 -16 thread
• Tomlinson part no. 1902524, 1917443
No. 286-1001
•Hose barb for 1⁄2" ID tubing and 3
⁄8" NPS x 1⁄2" thread inlets
•Plastic
•Tomlinson nos. 1021127, HFSH
No. 287-1042 Washer
• Tomlinson part no. 1903259
6
4
Drinking
Fountain Faucet
No. 108-1001
• 3⁄8" NPT female inlet
•Chrome-plated brass
Wine Faucet
7
Gauge Shield
Assemblies and Parts
Gauge Glass Nut and
Washer
•With 5⁄8" OD gauge glass
• 1⁄8" NPT male inlet on base
• Stainless steel hose fittings
• For 5⁄8" gauge glass
3. No. 287-1037 9" gauge shield assembly with glass
6. No. 287-1029 Gauge glass nut
• 11⁄16" ID
3. No. 287-1033 10" gauge shield assembly with glass
7. No. 104-1077 Gauge glass washer
• 13⁄16" OD x 9⁄16" ID x 1⁄4" thick
3. No. 287-1035 15" gauge shield assembly with glass
3
4. No. 287-1030 Top washer
5. No. 287-1031 Bottom washer
PLUMBING
Gauge Glass
5
Gauge Glass Cutter
No.
No.
No.
No.
No.
No. 142-1228
•Scores and cuts gauge glass and glass tubing quickly and easily
540
fmponline.com
274-1084
104-1076
274-1085
104-1074
104-1075
⁄8"
⁄8"
5
⁄8"
5
⁄8"
5
⁄8"
5
5
OD
OD
OD
OD
OD
x
x
x
x
x
6" L
8" L 10" L
12" L
18" L
PLUMBING
water station accessories
Water Station
No. 117-1138
Water Station by T&S Brass
•12" wide x 14" deep overall size
•83⁄4" x 83⁄4" x 3" deep drainage area with grid
•Drainage area is 2" from riser hole
• 7⁄8" diameter hole for glass filler shank
•Includes 1⁄2" NPS drain
•Stainless steel
No. 110-1090
•101⁄2" x 121⁄2" overall size
•41⁄2" x 10" x 11⁄2" deep drainage area
•Drainage area is 23⁄4" from riser hole
• 7⁄8" diameter hole for glass filler shank
•11⁄4" OD x 4" long drain tailpiece
•Stainless steel
•T&S no. B1231
Water Station by Fisher
No. 113-1012
•101⁄8" x 81⁄2" overall size
•31⁄4" deep
• 11⁄16" diameter hole for glass filler shank
• 3⁄4" NPS x 13⁄4" drain
•Stainless steel
•Fisher no. 1400-0000
CounterTop Drain Trays
• 1⁄2" x 2" NPS brass drain
•Stainless steel trough
No. 102-1088
No. 102-1090
147⁄8" x 53⁄8" x 3⁄4" D
24" x 53⁄8" x 3⁄4" D
No. 102-1089 Grid only for No. 102-1088
No. 102-1117 Grid only for No. 102-1090
Flanged Drop-In Drain Trays
PLUMBING
PLUMBING
• 3⁄8" flange
• 3⁄4" deep
• 1⁄2" x 2" NPS brass drain
•Stainless steel trough
No. 102-1091 Fits 147⁄8" x 51⁄2" cut-out
No. 102-1093 Fits 241⁄4" x 51⁄2" cut-out
No. 102-1089 Grid only for No. 102-1091
No. 102-1117 Grid only for No. 102-1093
Phone: 800-257-7737
24-Hour Fax: 800-255-9866
541
PLUMBING
glass filler faucets
Commercial-Duty
Glass Filler
Glass Filler by Fisher
No. 106-1174
•Manual water volume control adjustment
• 3⁄8" NPS x 13⁄4" shank
•81⁄2" height from deck to spout tip
•43⁄4" projection
•Chrome-plated brass
•Fisher no. 1007
•Continuous flow position and manual water
volume control adjustment
• 1⁄2" NPS x 23⁄4" shank with mounting hardware
•8" height from deck to spout tip
•41⁄4" projection
•Chrome-plated brass head
•Stainless steel riser
No. 112-1005
Commercial-Duty Wall
Mount Glass Filler
No. 106-1175
•Manual water volume control adjustment
• 1⁄2" NPS x 3" shank
• 3⁄8" ID
•51⁄4" projection
•Chrome-plated brass
Hose-Type Glass Fillers
by T&S Brass
1
•1⁄2" NPT male hose inlet
•36" stainless steel flexible hose
1. No. 110-1089Spray valve hose with aerator tip
•T&S no. B101A
No. 111-1102Replacement spray valve with aerator tip
2. No. 110-1079Spray valve hose with spray head
•T&S no. B101
2
PLUMBING
No. 111-1038 Valve repair kit (not shown)
•T&S no. B16K
•Kit includes: 1 spring,
2 brass washers,
2 packings,
2 seat washers,
2 binding washers,
2 fiber washers
Many items on this page are available
Lead-free Compliant.
Ask us about the item you need.
542
fmponline.com
PLUMBING
glass filler faucets & accessories
Glass Filler Repair Kits
Commercial-Duty
No. 106-1161 Repair kit
No. 110-1086
•Manual water volume control adjustment
• 1⁄2" NPS x 2" shank
•8" height from deck to spout tip
•415⁄16" projection
•Chrome-plated brass
•T&S no. B1210
No. 110-1084 Replacement head only
•T&S no. B1205
Glass and Pitcher Filler
by T&S Brass
•Contains O-rings, cam, plunger, nozzle, spring, cap, activation lever and set screws
Fisher
No. 110-1088
No. 113-1020 Repair kit (not shown)
•Manual water volume control adjustment on glass filler
• 1⁄2" NPS x 2" shank
•8" height from deck to glass filler spout tip
•14" height from deck to pitcher filler spout tip
•415⁄16" glass filler projection
•6" spout on pitcher filler
•Chrome-plated brass
•T&S no. B1225
•Contains bonnet washer, bonnet nut, volume
cock assembly, spring, retainer assembly, lift pin assembly, flow control axle screw and arm
•Fisher no. 1134
T&S Brass
No. 111-1036 Repair kit (not shown)
•Contains handle screw and nut, lever arm, 2 bonnet washers, 2 hex cap washers, 2
springs, 2 seat washers, and 2 packings
•T&S no. B1255
2
1
3
Wall Mount Glass Filler
by T&S Brass
Parts for T&S Brass
Glass Fillers
No. 110-1085
•Connect water supply to glass filler
•Manual water volume control adjustment
•Fits up to a 7⁄8" hole
•Lock nut and adjustable flange included
• 3⁄8" NPT female inlet
•4" projection
•Chrome-plated brass
•T&S no. B1200
1. No. 111-1157 Tailpiece washer
2. No. 111-1155 Tailpiece
• 1⁄4" NPT male
3. No. 111-1156 Tailpiece nut
• 1⁄2" NPT female
Replacement
Glass Filler
Arms
No. 111-1115 T&S arm
•Blue Lexan®
Parts
No. 111-1070 Screw
No. 111-1076 Nut
No. 113-1019 Fisher arm
•White plastic
Many items on this page are available
Lead-free Compliant.
Ask us about the item you need.
Phone: 800-257-7737
24-Hour Fax: 800-255-9866
543
PLUMBING
PLUMBING
Glass Filler by T&S Brass
PLUMBING
valves
TRAP PRIMER
by ZURN®
No. 117-1288
4
•1⁄2" solder x 1⁄2" NPT
•Brass
•Zurn no. TP2920BR1
5
Vacuum Breakers
4. No. 111-1014 3⁄8" NPT
4. No. 111-1015 1⁄2" NPT
•Unfinished brass
5. No. 117-1055 3⁄4" NPT
•Chrome-plated brass
THERMOSTATIC MIXING VALVE
by ZURN®
Prevents scalding water-related injuries.
No. 117-1287
•3⁄4" compression inlet and outlet
•95° to 115°F outlet temperature range
•145 PSI maximum inlet pressure
•Includes two 3⁄8" compression fittings and
mounting bracket
•Bronze body
•Zurn no. ZW3870-4P
Backflow
Preventer
No. 111-1013
• 3⁄4" garden hose female inlet
• 3⁄4" garden hose female outlet
•Rated 125 PSI for water
•Chrome-plated brass
Angle Valve
No. 117-1018
• ⁄4" NPT
• Rated 125 PSI for steam,
200 PSI for water
• Heat resistant handle
•Brass
3
1
2
3
WATER ARRESTORS
by ZURN®
•150 PSI, 180°F maximum water rating
•ANSI-compliant
•Brass/copper
•Each kit contains disk float, and O-ring
No. 117-1053 For 3⁄8" NPT
No. 117-1057 For 1⁄2" NPT
No. 117-1056 For 3⁄4" NPT
1. No. 117-1284 1⁄2" NPT
•Zurn no. 1250A
2. No. 117-1285 3⁄4" NPT
•Zurn no. 1250B
3. No. 117-1286 1" NPT
•Zurn no. 1250C
Globe Valves
•Rated 150 PSI for steam,
300 PSI for water
•Heat resistant handle
•Brass
No. 117-1014
No. 117-1015
⁄2"
1
⁄4"
3
Vertical
Mounting
Check Valve
No. 111-1022
• 1⁄2" NPT
•Rated 125 PSI for steam, 400 PSI for water
•Brass
NPT
NPT
PLUMBING
Long Handle
Angle Steam
Valve
Long Handle
Globe Steam
Valve
No. 117-1064
No. 117-1066
• 1⁄2" NPT
•Rated 125 PSI for steam,
200 PSI for water
•Brass
• 3⁄8" NPT
•Rated 125 PSI for steam,
200 PSI for water
•Brass
544
Repair Kits for
Vacuum Breakers
Heavy-Duty Ball Valves
•Rated 600 PSI for water, oil, and gas
•Brass
No.
No.
No.
No.
fmponline.com
117-1084 1⁄2" NPT
117-1085 3⁄4" NPT
117-1081 1" NPT
117-1083 11⁄4" NPT
PLUMBING
valves
Conbraco
Pressure
Relief Valves
•Commonly used on steam cooking equipment
• 3⁄4" NPT
•Chrome-plated brass
No.
No.
No.
No.
No.
No.
No.
117-1121
117-1122*
117-1116*
117-1117
117-1118
117-1119
117-1120
8 PSI 8 PSI
15 PSI 25 PSI
30 PSI 45 PSI 50 PSI *Unplated brass
Watts
Pressure
Reducing
Valve
No. 117-1109
• 3⁄4" NPT
•With integral strainer and union inlet
•10–35 PSI reducing range
•Bronze body
Asco Steam-Rated
Solenoid Valves
Watts Pressure
Reducing Valve
•300°F maximum temperature rating
•50 PSI safe working pressure
•Normally closed
No. 117-1111
Watts
Temperature
and Pressure
Relief Valves
•3⁄4" NPT
•210°F temperature relief
•Bronze body
No. 117-1113
•125 PSI •3⁄4" NPT
•Rated 25–75 PSI •Bronze body
No.
No.
No.
No.
117-1094
117-1092
117-1093
117-1096
120
120
120
240
volt
volt
volt
volt
⁄8"
NPT
NPT
3
⁄4" NPT
3
⁄4" NPT
3
⁄2"
1
Solenoid
Valve
No. 190-1015
•Commonly used on
coffee equipment
• 1⁄8" NPT inlet and outlet
•Rated 90 PSI for water
•120 volt
No. 117-1114
•150 PSI
Watts Pressure
Reducing Valve
No. 117-1110
•1⁄2" NPT
•Rated 25–75 PSI
•Bronze body
Asco Hot Water-Rated
Solenoid Valves
2
Repair Kits for Asco Valves
Watts Pressure
Reducing Valve
No. 117-1112
•3⁄8" NPT
•Rated 10–100 PSI
•Bronze body
1.
1.
1.
2.
2.
No.
No.
No.
No.
No.
117-1088 3⁄8", 1⁄2" NPT hot water
117-1089 3⁄4" NPT hot water
117-1091 3⁄8", 1⁄2", 3⁄4" NPT steam (old style)
117-1154 3⁄8", 1⁄2" NPT steam (new style)
117-1155 3⁄4" NPT steam (new style)
Diaphragms Only
•210°F maximum temperature rating
•125 PSI safe working pressure
•Normally closed
No.
No.
No.
No.
No.
No.
117-1104
117-1102
117-1103
117-1107
117-1105
117-1106
No. 117-1099
120
120
120
240
240
240
volt
volt
volt
volt
volt
volt
⁄8"
3
⁄2"
1
⁄4"
3
⁄8"
3
⁄2"
1
⁄4"
3
NPT
NPT
NPT
NPT
NPT
NPT
PLUMBING
PLUMBING
1
240 volt coil only
No. 117-1086 3⁄8", 1⁄2" NPT hot water
No. 117-1087 3⁄4" NPT hot water
No. 117-1090 3⁄8", 1⁄2", 3⁄4" NPT steam (old style)
Phone: 800-257-7737
24-Hour Fax: 800-255-9866
545
PLUMBING
flush valves
Royal® Flushometer Valves
by sloan®
•Chrome-plated brass
1. No. 141-1044 Toilet valve, 3.5 GPF
•Model 110
•1" NPS inlet x 11⁄2" OD outlet tube
1. No. 141-1171 Toilet valve, 1.6 GPF
•Model 111
•For use on low water consumption toilets only
•1" NPS inlet x 11⁄2" OD outlet tube
2. No. 141-1049 Urinal valve, 1.5 GPF
•Model 186
• 3⁄4" NPS inlet x 3⁄4" OD outlet tube
1
2
Replacement parts for Royal®
flushometer valves by sloan®
TOILET FLUSH HANDLES
•Includes threaded plastic nut and brass lever
•Chrome-plated brass
No. 106-1178 Left-hand
No. 106-1179 Right-hand
Diaphragm Repair Kits
for Flush Valves
•Contain all necessary internal parts
Standard Consumption
Vacuum Breaker Repair Kit
for Flush Valves
No. 141-1031
•Contains all necessary internal parts
No. 141-1029 Urinal (1.5 GPF)
No. 141-1030 Toilet (4.5 GPF)
Low Consumption
No. 141-1160 Urinal (1 GPF)
No. 141-1159 Toilet (1.6 GPF)
PLUMBING
ToiLET FLAPPER
No. 280-1247
•Adjustable to control amount of water per flush
Replacement Caps for
Flush Valves
•Chrome-plated brass
No. 141-1013 17⁄16" OD
No. 141-1012 15⁄8" OD
546
Handle Repair Kit for Flush Valves
No. 141-1028
•Contains all necessary internal parts
fmponline.com
PLUMBING
flush valves
INFRARED FLUSH KIT
by SLOAN®
No. 141-2031
• Used to retrofit toilets and urinals with side mount
infrared units
• “No Hands” operation
• Kit includes: Manual override,
Low battery warning light,
Infrared sensor range adjustment screw,
Reset button,
4 C batteries,
Installation tools
No. 253-1240 Replacement C battery
G2 Optima Plus®
Infrared Flush Valve Kits
by SLOAN®
Automatic flush valves save water, are sanitary, and meet ADA
requirements. Kits easily convert manual Sloan Flushometers to hands-free automatic operation that require no AC electric hook-up.
Efficient 3 year battery life.
•Includes manual override
•4 AA batteries included
•Low battery warning light
No. 141-1139 Urinal
•Model G2-RESS-U
•Fits urinal flush valve (No. 141-1049)
•Includes 2 flush regulators, 1.0 GPF and 1.5 GPF
No. 141-2026 Toilet
• Model G2-RESS-C
• Fits toilet flush valves (No. 141-1044 and 141-1171)
• Includes 2 flush regulators, 1.6 GPF and 3.5 GPF
No. 253-1241­ Replacement AA battery
Replacement parts for optima plus® Toilet flush valve
conversion kits, ress Series
STOP CAP
No. 141-2027
ELECTRONIC MODULE
HANDLE CAP
No. 141-2029
No. 141-2030
• For model RESS-C-1.6
• Includes 4 AA batteries
• For models RESS-C-1.6, RESS-C-3.5, RESS-C-4.5
• 13⁄4" OD
• Includes gasket
• Chrome-plated brass
No. 253-1241 Replacement AA battery
Phone: 800-257-7737
24-Hour Fax: 800-255-9866
PLUMBING
PLUMBING
• For models RESS-C-1.6, RESS-C-3.5, RESS-C-4.5
• Used in 1" H600A/H700A Bak-Chek® Control Stop
• 17⁄8" OD
• Includes sleeve
• Chrome-plated brass
DIAPHRAGM KIT
No. 141-2028
• For models RESS-C-1.6, RESSC-3.5, RESS-C-4.5
• Includes white regulator for
3.5/4.5 GPF
547
PLUMBING
pedal & foot valves
Double Pedal
Valve by
T&S Brass
Foot Valve
by T&S Brass
Floor Mounted Double
Pedal Valve by T&S Brass
No. 110-1106
No. 110-1067
•Elevated mounting
•Self-closing valve with twin pedals
• 1⁄2" NPT female inlets on 21⁄2" centers on top
• 1⁄2" NPT female outlet on top
•133⁄4" from wall to pedal tip
•Chrome-plated brass
•T&S no. B504
•Self-closing valve with twin pedals
• 1⁄2" NPT female inlets on 21⁄2" centers on back
• 1⁄2" NPT female outlet on back
•1" from floor to center of inlets
•Chrome-plated brass
•T&S no. B502
No. 111-1141 Replacement bonnet assembly
No. 110-1069
•Elevated mounting
•Self-closing valve with twin pedals
• 1⁄2" NPT female inlets on 21⁄2" centers on back
• 1⁄2" NPT female outlet on top
•Chrome-plated brass
•T&S no. B505
No. 111-1141 Replacement bonnet assembly
No. 111-1141 Replacement bonnet assembly
Mixing Valve
by T&S Brass
No. 111-1023
Encore® Floor Mounted
Double Pedal Valve by CHG
No. 106-1144
•Self-closing valve with twin pedals
• 1⁄2" NPT female inlets on 21⁄2" centers on back • 1⁄2" NPT outlet on back
•Color-indexed pedals
•Rough chrome body with polished chrome foot
pedals
No. 106-1155 R eplacement bonnet assembly
Floor Mounted
Single Pedal Valve
by T&S Brass
•For use with single pedal valve (No. 110-1068)
•3" centers
• 3⁄8" NPT female inlets and outlet on back
•Chrome-plated brass
•T&S no. B513
No. 110-1068
•For use with mixing valve (No. 111-1023)
•Self-closing valve with pedal
• 1⁄2" NPT female inlet and outlet on back
•1" from floor to center of inlet
•Chrome-plated brass
•T&S no. B507
FOOT VALVE CYLINDER
by FISHER
No. 113-1111
•For Fisher foot and knee valves
•Fisher no. 3070-0000
pedal and foot Valve Parts
by T&S Brass
REF
No. ITEM No.
1
PLUMBING
8
4
2
548
3
5
6
7
1.
2.
3.
4.
5.
6.
7.
8.
111-1141
111-1066
111-1064
111-1059
111-1140
111-1054
111-1144*
111-1057
DESCRIPTION
Bonnet assembly
Push button
Spring
Bonnet washer
Bonnet body
Binding washer
Seat washer
Stem with packing
No. 111-1011 Valve repair kit
•Kit includes:
4 stems with packings (No. 111-1057)
4 springs (No. 111-1064)
4 binding washers (No. 111-1054)
4 bonnet washers (No. 111-1059)
4 gray seat washers (No. 111-1144)
4 white seat washers, hard rubber (No. 111-1144)
•T&S Brass no. B50P
*Includes 1 gray washer and 1 white hard rubber washer
fmponline.com
PLUMBING
Are You
Missing
the FAX?
Plumber’s PUTTY
No. 117-1156
•1⁄2 pt, 14 oz
(397g)
net weight
Epoxy Putty
Take advantage
of this
FREE SERVICE...
Mixes like putty, hardens like steel; it can be
sawed, drilled, and tapped. Works on most
metals, wood, masonry, ceramics, glass, plastic,
or porcelain. Sets in 5 minutes—even under water.
The one-piece formula leaves no leftovers and no
mess.
•4 oz (113g) tube
No. 142-1128 Gray/green
No. 142-1437 Aquamend
plunj-n-snake™
by drain blaster®
Plunger and snake in one tool.
Handy tool can be used as a normal plunger to
unclog sinks and toilets. Unscrew the T-shaped
handle for a Snappy Snake™ which can be
inserted into the drain or toilet to clear the clog.
No. 142-1457
•53⁄4" (146mm) wide rubber base
•24" (610mm) long snake with “corkscrew” head
•27" (686mm) clear plastic handle
Get new product
updates &
exclusive savings
opportunities!
register for
this service.
Pipe Joint Compound
PLUMBING
PLUMBING
Call Sales to
No. 117-1036
•For use with water, steam and gas
•Non-corrosive
•1 lb (237mL) can
•Brush is in cap
Phone: 800-257-7737
24-Hour Fax: 800-255-9866
PLUNGER
No. 280-1246
•For use on toilets and sinks
•Black 6" (152mm) wide rubber base on a 21"
(533mm) handle
549
PLUMBING
hoses & accessories
Hose Carrier
and Holder
Fits easily around a 100' garden hose. The easy-to-use hook and loop closures adjust to
fit most hose sizes. Can also be used for extension
cords, tubing, etc.
No. 280-1177
•Tested up to 50 lb
•3" wide
•Strong, reinforced black nylon with double
stitched nylon binding and reinforced handle
Insulated Wash-Down
Spray Nozzle
No. 159-1015
•
⁄4"
male thread on outlet for screwing on
chemicals and other containers
•Insulated handle and grip for hot water
applications (160°F maximum)
•3⁄4" garden hose inlet
•Carded for point-of-purchase sale display
3
Neoprene
Steam Hoses
with Internal
Wire Braids
•Maximum pressure 250 PSI
•For temperatures up to 450°F
ITEM No.
IDLENGTH
117-1131
117-1133
1
⁄2"
10'
10'
⁄4"
3
NOZZLE
No. 159-1147
•For use with 3⁄4" ID hose (No. 117-1133)
•3⁄8" outlet
•93⁄4" length
•White rubber with aluminum barb
STANDARD SPRAY NOZZLE
No. 159-1022
•Maximum water temperature 100°F
•Chip resistant powder coat finish
•Die-cast metal body
HOsE RACK
by STRAHMAN
PLUMBING
No. 159-1016
•Holds up to 50' of hose
•Includes mounting hardware
•Stainless steel
Teflon® Tape
Teflon® Packing
No. 117-1034
No. 117-1011
• ⁄2" x 520"
1
550
(13mm x 13M)
roll
• 3⁄32" round x 60" long
fmponline.com
(2mm x 1.5M)
PLUMBING
hoses & accessories
1
1
Y
W YEAR
ARR ANT
Creamery Wash-Down Hoses
•For heavy-duty use
• 1⁄2" NPT male x 3⁄4" female garden hose thread
• 3⁄4" ID hose
•Maximum pressure 200 PSI
•Withstands hot water and saturated steam up to 298°F
No. 117-1000 25' long
No. 117-1001 50' long
Y
W YEAR
ARR ANT
Wash-Down
Spray Nozzle
by Strahman
mini wash-down
Spray Nozzle by Strahman
No. 159-1000
•Adjusts from a soft spray to a strong, straight spray as lever is pulled forward
•Automatically shuts off when handle is released
•Maximum water temperature 200°F
•Inlet coupling for 3⁄4" ID hose or 1
⁄2" NPS female inlet
•Cast brass body with heat resistant rubber
coating
No. 159-1034
Mini version of No. 159-1000. Weighs only 1.8 lb!
•Automatically shuts off when handle is released
•Maximum water temperature 200°F
•3⁄8" NPT x 3⁄4" female garden hose thread swivel fitting
•Brass body with black rubber coating
No. 159-1008 Replacement cartridge
•Contains all internal moving parts
No. 159-1013
Replacement rubber cover
1
1
W YEAR
ARR ANT
Industrial
Hot Water Hoses
FITTINGS FOR SPRAY NOZZLES
by STRAHMAN
HYDRO-PRO150 SPRAY
NOZZLE by STRAHMAN
•Crush-proof brass garden hose fittings
•Withstands temperatures to 180°F
•500 lb burst strength
•Double spiral reinforcement for cut resistance
•Red, heavy-duty rubber
1. No. 159-1025 Swivel-pro adaptor
• 1⁄2" NPT inlet and 3⁄4" garden hose thread outlet
No. 159-1024
No. 159-1004
No. 159-1011
⁄8" ID
5
⁄4" ID
3
x 50' roll
x 50' roll
2. No. 159-1003 Swivel
• 1⁄2" NPT male x 3⁄4" female garden hose
thread swivel fitting
3. No. 159-1002 Rigid
• 1⁄2" NPT male x 3⁄4" female garden hose thread
Phone: 800-257-7737
24-Hour Fax: 800-255-9866
•For use with creamery wash-down hoses (Nos. 117-1000 and 117-1001)
•Can be used with standard water hose (must use adaptor No. 159-1025)
•Ergonomic design reduces user fatigue
•Patented trigger locking mechanism
•57⁄8" L x 7" H
•Maximum recommended operating temperature 200°F
•1⁄ 2" NPT female inlet
•Black nylon, stay cool covering
PLUMBING
PLUMBING
3
Y
2
551
PLUMBING
tubing fittings
Female Swivel
Flare Hose Nipples
Hose Splicers
•Stainless steel
No.
No.
No.
No.
104-1046
104-1047
104-1048
104-1049
SAE
1
⁄4" SAE
3
⁄8" SAE
3
⁄8" SAE
1
⁄4"
⁄4" ID
x
hose
x 3⁄8" ID hose
x 1⁄4" ID hose
x 3⁄8" ID hose
1
Oetiker Clamp Kit
•Stainless steel
No. 104-1043
No. 104-1044
No. 104-1045
No. 142-1117
⁄4" ID
hose
1
⁄4" ID hose x 3⁄8" ID hose
3
⁄8" ID hose
1
•Kit includes: 15 of each millimeter size: 8.7,
10.5, 11.3, 12.3, 13.3, 14.0, 14.5, 15.7,
17.0, 18.5; 30 of millimeter size: 19.8; and pliers
•Stainless steel stepless ear clamps
No. 142-1123 Pliers only
Male Flare Hose Nipples
Hose Elbows
•Stainless steel
•Stainless steel
No.
No.
No.
No.
104-1050
104-1051
104-1052
104-1053
SAE
1
⁄4" SAE
3
⁄8" SAE
3
⁄8" SAE
1
⁄4"
x
x
x
x
⁄4" ID
hose
3
⁄8" ID hose
1
⁄4" ID hose
3
⁄8" ID hose
1
No. 104-1042
No. 104-1041
⁄4" ID
1
⁄8" ID
3
hose
hose
OEtiker
Clamps
•Sold in quantities of 100
•Stainless steel
ITEM No.
142-1120
142-1122
142-1118
142-1443
Hose Tees
Swivel Flare Elbow Hose Nipples
•Stainless steel
No. 104-1054
No. 104-1055
No. 104-1057
CLAMP
RANGE
.413"
.445"
.525"
.669"
to
to
to
to
FOR TUBING
SIZE-OD
.346"
.378"
.425"
.571"
3
⁄8"
⁄16"
7
1
5
⁄2"
⁄8"
•Stainless steel
No. 104-1040
No. 104-1039
⁄4" ID
1
⁄8" ID
3
hose
hose
⁄4"
SAE x 1⁄4" ID hose
SAE x 3⁄8" ID hose
3
⁄8" SAE x 3⁄8" ID hose
1
⁄4"
1
Hose Clamps
PLUMBING
•Standard-type with 1⁄2" wide band
•Sold individually
•Stainless steel clamp and screw
EVA Reinforced
Beverage Tubing
Male Pipe Hose Nipples
•Stainless steel
No.
No.
No.
No.
104-1058
104-1059
104-1060
104-1061
552
NPT
NPT
3
⁄8" NPT
3
⁄8" NPT
1
1
⁄4"
⁄4"
x
x
x
x
⁄4" ID
hose
hose
1
⁄4" ID hose
3
⁄8" ID hose
1
⁄8" ID
3
25'
100'
LENGTHSLENGTHS
104-1033104-1034
104-1035104-1036
ITEM No.
OD
⁄32"
15
⁄8"
5
IDWALL
1
3
⁄4"
⁄8"
7
⁄64"
⁄8"
1
142-1165*
142-1166
142-1116
142-1167
142-1114
*
⁄16"
5
fmponline.com
wide band
QTY
CLAMP RANGE
4
6
8
10
12
to 5⁄8"
to 25⁄32"
1
⁄2" to 29⁄32"
9
⁄16" to 11⁄16"
11
⁄16" to 11⁄4"
⁄4"
1
⁄16"
7
PLUMBING
3M/cuno WATER FILTERS
1
3
2
4
3M/CUNO REPLACEMENT CARTRIDGES
REF No.
FMP No.
CUNO MODEL No.
REDUCTION CLAIMS
1
117-1264
CFS8112
Sediment, chlorine taste + odor
1
1
117-1217
CFS8112-S
Sediment, chlorine taste + odor, and scale inhibitor
1
1
117-1265
CFS8720
Sediment, chlorine taste + odor
1
117-1266
CFS8720-S
Sediment, chlorine taste + odor, and scale inhibitor
1
117-1267
CFS8110-S
Sediment, scale inhibitor
1
117-1268
CFS8000-S
Scale inhibitor
2
117-1269
CFS8112-EL
Sediment, chlorine taste + odor
1
2
117-1270
CFS8720-EL
Sediment, chlorine taste + odor
5
2
117-1271
CFS8112-ELS
Sediment, chlorine taste + odor, and scale inhibitor
1
2
117-1272
CFS8720-ELS
Sediment, chlorine taste + odor, and scale inhibitor
5
3
117-1206
CFS117S
Granulated activated carbon built-in scale inhibition
5
6
MICRON
5
n/a
5
n/a
8
7
5
9
3M/CUNO IMPACT TECHNOLOGY REPLACEMENT CARTRIDGES
REF No.
FMP No.
CUNO MODEL No.
REDUCTION CLAIMS
MICRON
4
117-1255
HF40
Cysts, bacteria, chlorine taste + odor
0.2
5
117-1256
HF60
Cysts, bacteria, chlorine taste + odor
0.2
6
117-1257
HF90
Cysts, bacteria, chlorine taste + odor
0.2
PLUMBING
PLUMBING
HI-FLOW BEVERAGE
HI-FLOW ICE
4
117-1258
HF40-S
Cysts, bacteria, chlorine taste + odor, scale
0.2
5
117-1259
HF60-S
Cysts, bacteria, chlorine taste + odor, scale
0.2
6
117-1260
HF90-S
Cysts, bacteria, chlorine taste + odor, scale
0.2
HI-FLOW BREW
7
117-1261
HF10-MS
Cysts, bacteria, chlorine taste + odor, scale
0.5
8
117-1262
HF20-MS
Cysts, bacteria, chlorine taste + odor, scale
0.5
9
117-1263
HF30-MS
Cysts, bacteria, chlorine taste + odor, scale
0.5
Phone: 800-257-7737
24-Hour Fax: 800-255-9866
Wrench
No. 117-1207
•For CFS22 filter canisters
•Cuno nos. 68900-32, 68900-33
553
PLUMBING
water Filter CROSS REFERENCE CHART
FMP #
Costguard
Model #
Part #
Cornelius
Part #
Cuno
Part #
CFS110
CFS111
CFS124
55591-08
NuCalgon
Part #
Puremark
Part #
Selecto
Part #
Ecolab
Part #
Bunn®
Part #
Manitowoc
Part #
Cuno-Aqua
Pure Part #
NP48S
PFS101
PFS105
PFS120
PFS150
109-0010
109-230
109-232
109-235
109-240
9320-1135
S5-10
K-00069
K-00173
AP110
AP111
AP124
109-0020
9320-1143
S5-20
N/A
N/A
PREFILTERS
EC110
9534-40
DEV9109-08
COR101
COR105
COR120
COR150
117-1157
EC210
9534-20
9534-26
DEV9109-12
COR201
COR205
COR220
COR250
CFS110-C20
CFS124-C20
55906-01
N/A
PFS201
PFS205
PFS220
PFS250
117-1166
N/A
N/A
N/A
N/A
N/A
N/A
101-230
101-230
N/A
N/A
N/A
117-1162
GRANULAR CARBON
117-1183
CGT-10
9108-11
DEV9108-11
N/A
CFS117
N/A
PFS17
101-200
9320-1143
C-10
N/A
AP-117
117-1184
CGT-20
9108-32
DEV9108-32
N/A
CFS017-C20
N/A
PFS27
N/A
N/A
C-20
ED-T-2
N/A
N/A
117-1195
CGT-20S
9108-33
DEV9108-33
COR20As
CFS017S-C20
C-0070
PFS27s
N/A
N/A
CP-20
ED-TL-2
Triliminator
K-00070
N/A
117-1048
N/A
MH2
EV9613-21
EV9613-26
N/A
N/A
N/A
N/A
N/A
QC71
N/A
N/A
N/A
117-1180
N/A
BH2
EV9612-50
EV9612-51
N/A
N/A
N/A
N/A
N/A
QL3
N/A
N/A
N/A
CARBON BLOCK
PLUMBING
117-1185
CG5-10
9108-15
DEV9108-15
COR10B1
COR10B5
N/A
NP48C
PFS10B1
PFS10B5
N/A
9320-1002
N/A
N/A
N/A
117-1187
CG5-10S
9108-17
DEV9108-17
COR10B1s
COR10B5s
N/A
NP48PC
PFS10B1s
PFS10B5s
N/A
9320-1010
N/A
N/A
N/A
117-1186
CG5-20
9108-25
DEV9108-25
COR20B1
COR20B5
55907-01
N/A
PFS20B1
PFS20B5
N/A
9320-1069
N/A
N/A
N/A
117-1188
CG5-20S
9108-27
DEV9108-27
COR20B1s
COR20B5s
N/A
N/A
PFS20B1s
PFS20B5s
N/A
9320-1077
N/A
K-00174
N/A
117-1168
N/A
N/A
N/A
N/A
N/A
N/A
101-290
101-390
101-290
N/A
N/A
N/A
117-1169
N/A
N/A
N/A
N/A
N/A
N/A
101-300
101-298
101-300
101-298
N/A
N/A
N/A
SR-10
9105-81
DEV9105-81
COR10sIMF
CFS420INF
NP486R
PFS10sIMF
101-260
9320-1150
P12-10
N/A
N/A
SO-10
9105-41
DEV9105-41
N/A
N/A
N/A
N/A
N/A
9320-1176
WS-10
N/A
N/A
SCALE REDUCTION
117-1191
SOFTENING
117-1189
554
fmponline.com
PLUMBING
costguard filters
PREFILTERS
1. No. 117-1162 For all 10" bowls
• EC110 cartridge
2. No. 117-1157 For all 20" bowls
•EC210 cartridge
ICE MACHINE REPLACEMENT CARTRIDGES
3. No. 117-1183 Reduces chlorine, tastes, and odors for high flow rate capacities
•10" long
•CGT10 cartridge
1
3
4. No. 117-1184 Reduces chlorine, tastes, and odors for larger machines with very high flow rates
•20" long
•CGT20 cartridge
4. No. 117-1195 Reduces chlorine, tastes, odors, and scale formations
•For use with Manitowoc Triliminator equipment
•CGT20S cartridge
2
5. No. 117-1187 Reduces chlorine, tastes, odors, and scale formations
•5 micron carbon filtration
•10" long
•CG5-10S cartridge
6. No. 117-1188 Reduces chlorine, tastes, odors, and scale formations for all 20" bowls
•5 micron carbon filtration
•20" long
•CG5-20S cartridge
7. No. 117-1191 Treats scale, corrosion, and iron
•10" long
•SR10 cartridge
COFFEE and ESPRESSO RELATED
REPLACEMENT CARTRIDGES and FILTERS
8. No. 117-1189 750 grains capacity softener
•Used in espresso applications
•SO10 cartridge
5, 9
4
COMBINATION SYSTEMS/FOUNTAIN
DRINK REPLACEMENT CARTRIDGES
9. No. 117-1185 Reduces chlorine, tastes, and odors; filters particulate down to 5 microns
•For all 10" bowls
•5 micron carbon cartridge
•CG5-10
6, 10
10. No. 117-1186 Reduces chlorine, tastes, and odors. Filters particulate down to 5 microns
•For all 20" bowls
•5 micron carbon cartridge
•CG5-20
REPLACEMENT PARTS and TOOLS
No. 117-1192 O-ring, 31⁄2" OD (not shown)
•Fits 10" and 20" slimline bowls
No. 117-1193 Wrench (not shown)
•Fits 10" and 20" slimline bowls
PLUMBING
PLUMBING
11. No. 117-1194 Pressure gauge
7
Phone: 800-257-7737
24-Hour Fax: 800-255-9866
8
11
555
PLUMBING
everpure® water filters
INSURICE® FILTRATION SYSTEMS
and cartridges for ice machines
•Pressure gauges display 0–125 PSI
•NSF listed for class 1 taste, odor, chlorine, submicron particulate,
and cyst reduction
1. No. 117-1198 InsurIce single filter system–I20002
•Filters up to 750 lb/day for most cubers and 1500 lb/day for
most flakers
•Includes cartridge head with water pressure gauge, I20002 filter cartridge (No. 117-1159), red plastic flush tubing
•Everpure no. EV9324-01
2. No. 117-1199 InsurIce twin filter system–I20002
•Filters up to 1450 lb/day for most cubers and 2200 lb/day for most flakers
•Includes twin cartridge head with water pressure gauge, 2 antimicrobial-treated I20002 filter cartridges (No. 117-1159), clear plastic flush tubing
•Everpure no. EV9324-02
1
2
3. No. 117-1159 InsurIce I20002 cartridge
• For single and twin ice machine filtration systems
•Cartridge features antimicrobial treatment
•Everpure nos. EV9612-21, EV9612-22
4. No. 117-1218 Triple filter system–I40002
•For high volume, high capacity ice machines
•Includes triple cartridge head with inlet and outlet water pressure gauges, 3 antimicrobial-treated I40002 filter cartridges (No. 117-1160), clear PVC tubing, black plastic coupling, and tubing connector
•Everpure no. EV9325-03
5. No. 117-1160 InsurIce I40002 cartridge
• For triple and quad ice machine filtration systems
•Cartridge features antimicrobial treatment
•Everpure nos. EV9612-31, EV9612-32
4
3
Replacement cartridge
6. No. 117-1179 7CB5-S cartridge
• For high turbidity or low flow water pressure
•Everpure no. EV9618-21
scale sticks™
7. No. 117-1226 Scale Stick™, SS-IMF
•Scale inhibitor
•Fits old style IMF Housings
•For 8" housing
•Everpure no. EV9799-32
PLUMBING
7. No. 117-1203 Scale Stick™, SS-10
•Scale inhibitor
•For 10" housing
•Everpure no. EV9799-02
6
5
556
fmponline.com
7
PLUMBING
everpure® water filters
KLEENSTEAM® AR-X FILTRATION SYSTEM
Cartridges for steamers
1. No. 117-1213 AR-X pre-filter housing
• Used with Kleensteam AR-X system pre-filter cartridges
• Includes O-ring (No. 117-1214)
• Clear plastic
• Everpure no. EV3070-19
–
2
1
No. 117-1214 Replacement O-ring (not shown)
•Everpure no. EV3071-19
2. No. 117-1203 Scale Stick™, SS-10
•Replaces AR10 cartridge and is longer lasting
•For 10" housing
•Everpure no. EV9799-02
3. No. 117-1209 A-10 pre-filter housing
•Used with scale stick (No. 117-1203) and any other 10" filters
•Clear plastic
•Includes mounting bracket, screws, and O-ring
•Everpure no. EV9100-01
4. No. 117-1202 7CB5 cartridge
• Carbon block filter
• 5 micron filter for taste and odor control
• Everpure no. EV9618-11
3
4
Countertop KleenSteam® CT System
Provides high quality water and deliming capabilities. Carbon technology
provides dirt, chlorine, taste, odor, and micron particulate reduction.
5. No. 117-1248 Kleensteam® CT System
•For use with countertop steamers
•Includes 4CB5 carbon block cartridge (No. 117-1247), housing (No. 117-1213), Scale Stick™ (No. 117-1203), and 2 ScaleKleen® Scale
Remover packets (No. 117-1197)
•Everpure no. EV9797-50
6. No. 117-1247 4CB5 carbon block cartridge
•For medium flow water pressure areas and low volume applications
•6000 gal (23000L) capacity
•Everpure no. EV9617-11
5
7. No. 117-1250 Kleensteam® II System
•Can accommodate a second filter cartridge for increased capacity
• 3⁄4" NPT inlet and outlet
•Includes:
7CB5 filter cartridge (No. 117-1202)
Scale Stick SS-10 (No. 117-1203)
2 packets 2.2 lb ScaleKleen (No. 117-1196)
Pressure gauge
SR-X scale reduction feeder housing
Dip tube for ScaleKleen delimer feed
Cartridge plug for second filter head
Bowl wrench (No. 117-1170)
Instructions and hardware
•Everpure nos. 979721, EV9797-21, EV9797-21A
Phone: 800-257-7737
6
PLUMBING
PLUMBING
Kleensteam® II Cartridge System
for Steamers
7
24-Hour Fax: 800-255-9866
557
PLUMBING
everpure® water filters
Fountain/Combination Filter System
and Replacement Cartridges
1. No. 117-1244 CB20-124E fountain/combo system with cartridge
•For high flow, high volume foodservice applications requiring chloramine reduction
•Includes 1 CC1E cartridge (No. 117-1245), service wrench, and mounting screws
•0–100 PSI outlet pressure gauge
•Everpure nos. EV9100-51, CB20-124E
2. No. 117-1245 CC1E cartridge
•20,000 gallon capacity
•Includes bowl O-ring
•Everpure nos. EV9105-02, CC1E
2
1
Cartridge Fountain System and
replacement cartridges
3. No. 117-1219 Triple filter system–CB20-312E
•For high flow, high volume fountain applications requiring
chloramine reduction
•Includes 1 CC1E and 2 CC3E cartridges (No. 117-1220), PVC
drain tubing, cartridge housing wrench, 2-way water valve, fittings,
and hardware
•Everpure no. EV9100-37
3
4. No. 117-1220 CB20-312E triple cartridge kit
•Kit consists of 1 CC1E cartridge and 2 CC3E cartridges
•Everpure no. EV9105-34
5. No. 117-1221 CB20-302E dual cartridge kit
•Kit consists of 1 CC1E cartridge, and 1 CC3E cartridge
•Everpure no. EV9105-21
PLUMBING
5
4
558
fmponline.com
PLUMBING
everpure® water filters
COFFEE-RELATED Filter system and
Replacement CARTRIDGES
•NSF listed for class 1 taste, odor, chlorine, submicron particulate, and cyst reduction
1. No. 117-1223 QL3-BH system
•For low flow, medium volume coffee brewers
•Includes 1 BH2 cartridge (No. 117-1180), QL3 cartridge
head with water shut-off valve, fittings, and hardware
•Everpure no. EV9272-00
2. No. 117-1180 BH2 cartridge
• 3000 gallon capacity
•AgION™ antimicrobial protection
•Everpure nos. EV9612-00, EV9612-50
3. No. 117-1048 MH2 cartridge
• 9000 gallon capacity
•AgION™ antimicrobial protection
•Everpure nos. EV9613-01, EV9613-21
1
4. No. 117-1225 IN-10 in-line scale reduction filter
•2400 gallon capacity
•Includes 1⁄4" tubing inlet and outlet fittings
•Everpure no. EV9100-06
3
2
5. No. 117-1181 IN-12 in-line scale reduction filter
•4800 gallon capacity
• 1⁄4" female NPT
•Everpure no. EV9100-07
6. No. 117-1226 Scale Stick™, SS-IMF
•Fits old style IMF housings
•For 8" housing
•Everpure no. EV9799-32
6. No. 117-1203 Scale Stick™, SS-10
•For 10" housing
•Everpure no. EV9799-02
combination system
REPLACEMENT CARTRIDGES
6. No. 117-1226 Scale Stick™, SS-IMF
•Fits old style IMF housings
•For 8" housing
•Everpure no. EV9799-32
5
4
6
6. No. 117-1203 Scale Stick™, SS-10
•For 10" housing
•Everpure no. EV9799-02
7. No. 117-1232 Quad-MC cartridge kit
•For CSR Quad-MC system
•Includes 4 MC filter cartridges (No. 117-1047), 1 EC210 prefilter cartridge (No. 117-1157), 1 Scale Stick SS-IMF (No. 117-1226) with spacer, and 1 O-ring
•Everpure no. EV9628-08
9. No. 117-1047 MC2 cartridge
•For fountain beverage and combination systems; helps retain
the carbonation in fountain drinks
•9000 gallon capacity
•Inhibits bacterial growth with Micro-Pure II/AgION™
antimicrobial protection
•Everpure nos. EV9612-06, EV9612-55, EV9612-56
Phone: 800-257-7737
PLUMBING
PLUMBING
8. No. 117-1227 XC cartridge
•For fountain beverage and combination filtration systems
•33% more capacity than the MC cartridge
• 12,000 gallon capacity
•Everpure no. EV9613-09
7
24-Hour Fax: 800-255-9866
8
9
559
PLUMBING
everpure® water filters
DRINKING FOUNTAIN
REPLACEMENT CARTRIDGEs
1. No. 117-1182 OW200L cartridge
• For lead removal and scale retardation
•Everpure no. EV9619-01
2. No. 117-1047 MC2
•For fountain beverage and combination systems; helps
retain the carbonation in fountain drinks
•Inhibits bacterial growth with Micro-Pure II/AgION™
antimicrobial protection
•Everpure nos. EV912-06, EV9612-55, EV9612-56
Coarse Prefilter System and
replacement Cartridges
1
2
3
3. No. 117-1224 E-Series, 20" System
•For fountain beverage systems, ice makers, and combination systems
•Filters large dirt and rust particles extending carbon filter life
•Includes 1 EC210 cartridge, 1 cartridge wrench, 1 O-ring, a cartridge head, and housings
•Everpure no. EV9795-90
4. No. 117-1157 EC210 cartridge
•For all 20" bowls
5. No. 117-1162 EC110 cartridge
• For all 10" bowls
Dirty Water filtration
replacement cartridge
6. No. 117-1201 DM cartridge
•For high mineral content and low water volume
•Everpure no. EV9607-01
5
4
6
SCOTSMAN® WATER FILTRATION
SYSTEM CARTRIDGE
7. No. 117-1236 SSM cartridge
•For Scotsman® ice machines
•Class 1 ultra-fine submicron filtration
•Provides scale inhibition and corrosion protection
•Everpure no. EV9624-16
HOSHIZAKI® FILTRATION
SYSTEM CARTRIDGES
•For Hoshizaki ice machines
•Reduce lime scale formation and corrosion due to chlorine vapor
PLUMBING
8. No. 117-1237 HC-H cartridge
•For coarse particle filtration
•Everpure nos. EV9655-07, EV9655-08
9. No. 117-1238 HF cartridge
•For fine particle filtration
•Everpure no. EV9656-06
7
560
8
fmponline.com
9
PLUMBING
everpure® water filters
Disposable Precoat Filter
Replacement Cartridge
1. No. 117-1229 959-PM cartridge
•Fits all T9 series filters
•Bayonet style inlet fitting
•Everpure no. EV9630-01
HIGH TEMPERATURE
SCALE CONTROL SYSTEM
2. No. 117-1216 Kleenware System—HTS-11
•For use in high temperature applications like dish
machines and booster heaters
•200°F (93°C) maximum water temperature inlet
•Includes mounting bracket, screws, housing, HydroBlend® cartridge, service wrench
•Everpure no. EV9799-10 and EV9799-11
Prefilter Housing
2
3. No. 117-1231 For old style K series prefilters
•Includes O-ring
•Clear plastic
•Everpure no. EV3070-18
1
Gasket
4. No. 117-1230 For T-9 series 20" bowls
•8" (203mm) ID, 81⁄2" (216mm) OD
•Square cut gray rubber
•Everpure no. EV0944-00
Scale Kleen™
SCALE REMOVERs
• For all coffee, steam, and ware washing equipment
• Food grade crystals
5. No. 143-1091 13⁄4 oz
•Everpure nos. EV9796-50, EV979831
5. No. 117-1197 7 oz
•Everpure no. EV9798-20
4
5. No. 117-1196 21⁄5 lb
•Everpure nos. EV9798-01, EV9798-35
5
Y-Type
In-Line Strainer
In-Line Strainer
No. 117-1123
•Commonly used on coffee equipment
•Can be taken apart for cleaning
• 1⁄4" flare
⁄4"
• NPT PVC strainer with plug
•Rated 200 PSI for water
•#100 screen mesh
1
Phone: 800-257-7737
24-Hour Fax: 800-255-9866
No. 190-1031
561
PLUMBING
PLUMBING
3
PLUMBING
Selecto Scientific WATER FILTERS
Water Filter System
1. No. 117-1273 SMFIC620-2 Complete System (formerly IC10/620-2 and MF620CC)
• For fountain beverage machines
• Reduces chlorine, chloramines, sediment, bad tastes and odors, THM, organics, and tannins
• 200,000 gallon capacity
• 10 GPM flow rate
•0–160 PSI outlet pressure gauge
• Includes inlet shut-off valve, 1⁄2" inlet and outlet hose barbs, 4 O-rings, 2 tubes of O-ring lubricant, and 2 connectors
• Selecto Scientific no. 80-6202
2. No. 117-1166 MF5/600 prefilter cartridge
•5 micron
•93⁄4" long
•Selecto Scientific no. 101-230
2
1
3. No. 117-1274 SMFIC620-2 replacement cartridge
•Includes O-ring and O-ring lubricant
•Sold by the pair
•Selecto Scientific no. 108-0202
Polycarbon Filter Cartridges
4. No. 117-1168 10" long
•For newer style MF5/600, MF600, and MF600C
•Selecto Scientific no. 101-290
5. No. 117-1169 20" long
•For newer style MF5/620 and MF620
•Selecto Scientific nos. 101-298, 101-300
Scale Filter Cartridge
6. No. 117-1167 For model MF5/620-5
•Replacement scale inhibiting cartridge
•Includes O-ring and O-ring lubricant
•Selecto Scientific no. 101-260
Replacement Filter Kits
4
3
5
7. No. 117-1234 For model IC10/620-2 (formerly MF620CC)
•Reduces chlorine, chloramines, lead, bad tastes and odors; removes cysts
•Includes two 101-300 filters, 101-231P filter, 3 O-rings, and 3 tubes of O-ring lubricant
•20" long
•Selecto Scientific nos. 109-0027C, 109-0050
8. No. 117-1249 For model IC10/620 (formerly MF620C)
•Includes 1 prefilter, 1 sediment pre-filter cartridge, 4 filter O-rings, O-ring lubricant, and identification stickers
•Selecto Scientific nos. 109-0040, 109-0028C
Wrenches
9. No. 117-1170 Black
•For older style black and clear filter housings
•Selecto Scientific no. 700-300
10. No. 117-1171 White
•For newer style white filter housings
•Selecto Scientific no. 700-301
6
7
8
PLUMBING
9
562
10
fmponline.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement