PowerGenTM Product Catalog - Electrical Sales Associates

PowerGenTM Product Catalog - Electrical Sales Associates
PowerGenTM Product Catalog
Milbank | 4801 Deramus Ave., Kansas City, MO 64120 | 877.483.5314 | milbankworks.com
2
About
Milbank
About Milbank
Energy at Work
Milbank provides the tools that empower life. We enable the amazing in countless
everyday ways through our thoughtfully designed products and collaborative ingenuity.
More than a manufacturing company, we are an active and engaged contributor in the
movement and utility of energy. We are energy at work.
As a third-generation family-owned business, Milbank has been engineering and
manufacturing electrical supplies, equipment and solutions for use by utilities,
contractors, distributors and OEMs since its founding in 1927.
Today, Milbank’s meter mounting equipment is the standard by which all others are
measured. Our meter sockets and electrical enclosures can be found on homes, schools,
businesses, factories, roadways, RV parks, arenas, and airports across North America.
Much like the baseball bat that transfers the player’s energy to
the ball, Milbank provides the technology that moves power.
Milbank | 4801 Deramus Ave., Kansas City, MO 64120 | 816.410.7346 | milbankworks.com
Table of Contents
PowerGenTM Product Catalog
3
Table of
Contents
Standby Generator Systems
8 & 10kW
12kW
17 & 20kW
30 & 35kW
45 & 48kW
60 & 62kW
Transfer Switches
4-5
6-7
8-9
10-11
12-13
14-15
16-19
Portable Generators
5500-7500W
20-21
Contractor & Distributor Benefits
22-23
Electric Vehicle Supply Equipment (EVSE)
Wall-Mounted Charging Dock
Pedestal Charging Station
24
25
Technical Specifications
8-20kW
30-60kW
Transfer Switches
5500-7500W
EVSE
Milbank PowerGenTM Team
Milbank | 4801 Deramus Ave., Kansas City, MO 64120 | 816.410.7346 | milbankworks.com
26-27
28-29
30-33
34-35
36
37
4
8 & 10kW
8 & 10kW
Home Standby Generators
Models
8kW1 | MG08001
Keep essential appliances powered with the 8kW1
generator connected to pre-selected to circuits.
10kW1 | MG10002
Power the essentials and more with the 10kW1
paired with Milbank’s automatic transfer switch.
Utilizing our Power Management Technology,
the automatic transfer switch allows for flexible
management of electricity and appliances - all
while using a smaller, more fuel-efficient generator.
Features
More Power in a Smaller Generator – The compact
81 and 10kW1 standby generator is one of the most
powerful units of its kW class with higher power output
per square inch of its footprint – providing backup
electricity to more of your household appliances.
Homeowner Safety & Protection – We take
protection to a whole new level - the 8kW1 and 10kW1
come with an external, automatic gas shut-off valve,
low pressure regulator and a thermally-protected fuel
system which automatically shuts down the unit during
an emergency (not found on any other competing
generator in its class).
Comprehensive Warranty – Both the 8kW1 and
10kW1 units include a three-year, comprehensive parts
and labor warranty2. At Milbank, we stand behind our
products (for more than 85 years!), making it easy for
our customers to work with us.
Flexible Placement3 – Tested against the tough
National Fire Protection Agency 37 standard, Milbank
81 & 10kW1 standby generators can be placed as close
as 18” from the home providing more placement
options in your yard*– perfect for tight lot lines.
Durable Enclosure & Base – Our enclosures are made
from the same rust-resistant, durable Galvanneal
steel that is found in the automotive industry and
features an automotive-grade paint process which
results in protection against chipping and abrasions.
Our enclosures and base can endure temperatures of
more than double that of aluminum and plastic.
Innovative Airflow Technology – With the engine and
alternator intakes located in the rear, front ventilation
pushes the heat and carbon monoxide away from the
house - protecting homes, shrubs and landscaping
from damage.
Easy Wireless Monitoring - Simple, trouble-free
monitoring is a reality with our optional Basic Wireless
Monitor (sold separately).
3
YEAR
WARRANTY
1
This generator is rated in accordance with UL (Underwriters Laboratories) 2200 (stationary engine generator assemblies) and CSA (Canadian Standards Association) standard
C22.2 No. 100-04 (motors and generators). 2Warranty details are available at milbankworks.com. 3Installations must strictly comply with all applicable codes, industry standards,
laws, regulations and provided installation manual. Running engines give off carbon monoxide, an odorless, colorless, poisonous gas so it is important to keep exhaust gas
away from any windows, doors, ventilation intakes or crawl spaces. The installation manual contains specific instructions related to generator placement in addition to NFPA
37, including the requirement that carbon monoxide detectors be installed and maintained in your home. Milbank reserves the right to make changes in specifications and
features shown without notice or discontinue the product described at any time without notice or obligation. Other Generator/Automatic Transfer switch manufacturers’
products are not compatible with Milbank Home Generator Systems.
Milbank | 4801 Deramus Ave., Kansas City, MO 64120 | 816.410.7346 | milbankworks.com
5
8 & 10kW
8 & 10kW
Home Standby Accessories
Maintenance kit
Complete with special UL air filter, pre-cleaner,
spark plugs, oil filter and synthetic oil.
8kW | MG080022
10kW | MG101222
wireless router
MG623501
A signal enhancement to overcome obstructions. Recommended for applications with distances of 100 feet or more.
wireless monitor
MG626401
Easy, trouble-free monitoring is a reality with the new Milbank Basic Wireless
Monitor. Place the wireless monitor in your home and
know your generator is working without ever having to go
outside.
Cold weather kit
8kW | MG626201 - Dual Oil Heater
10kW | MG6111102
Complete with a dual oil heater and battery
warmer - both thermostatically controlled to
heat up when the temperature drops, ensuring
smooth starting and engine operation. Tested
at -25ºF.
Complete with an oil heater and battery warmer - both thermostatically controlled to heat up when the temperature
drops, ensuring smooth starting and engine operation. Tested at -25ºF.
Milbank | 4801 Deramus Ave., Kansas City, MO 64120 | 816.410.7346 | milbankworks.com
6
12kW
12kW
Home Standby Generators
Models
12kW1 | MG12002
Bigger isn’t always better - especially when it
comes to whole-house power. Ideal for small- to
medium-sized homes, the 12kW1 generator can
intuitively power the whole house when paired
with a Milbank automatic transfer switch.
Features
Streamlined, Space-Saving Design – Its vertical, sleek
design allows for a smaller footprint than most other
generators in its class. The compact 12kW¹ profile
blends in beautifully with your home’s exterior and
landscaping, much like your central air conditioner.
Comprehensive Warranty2 – The 12kW¹ unit
includes a four-year limited warranty2 - one of the
best comprehensive parts and labor warranties in the
industry. At Milbank, we stand behind our products
(for more than 85 years!), making it easy for our
customers to work with us.
Flexible Placement3 – Tested against tough
National Fire Protection Agency standards, Milbank
12kW¹ standby generator can be placed as close
as 18” from the home, providing more placement
options in your yard - perfect for tight lot lines.
Homeowner Safety & Protection – We take
protection to a whole new level - the 12kW1 comes
with an external, automatic gas shut-off valve, low
pressure regulator and a thermally-protected fuel
system which automatically shuts down the unit during
an emergency (not found on any other competing
generator in its class).
Power Management Technology – Partner with
an automatic transfer switch to manage up to two
load-dependent air conditioner units providing true
whole-house power with a smaller, more affordable
generator.
Durable Enclosure & Base – Our enclosures are made
from the same rust-resistant, durable Galvanneal
steel that is found in the automotive industry and
features an automotive-grade paint process which
results in protection against chipping and abrasions.
Our enclosures and base can endure temperatures of
more than double that of aluminum and plastic.
4
YEAR
WARRANTY
1
This generator is rated in accordance with UL (Underwriters Laboratories) 2200 (stationary engine generator assemblies) and CSA (Canadian Standards Association) standard
C22.2 No. 100-04 (motors and generators). 2Warranty details are available at milbankworks.com. 3Installations must strictly comply with all applicable codes, industry standards,
laws, regulations and provided installation manual. Running engines give off carbon monoxide, an odorless, colorless, poisonous gas so it is important to keep exhaust gas
away from any windows, doors, ventilation intakes or crawl spaces. The installation manual contains specific instructions related to generator placement in addition to NFPA
37, including the requirement that carbon monoxide detectors be installed and maintained in your home. Milbank reserves the right to make changes in specifications and
features shown without notice or discontinue the product described at any time without notice or obligation. Other Generator/Automatic Transfer switch manufacturers’
products are not compatible with Milbank Home Generator Systems.
Milbank | 4801 Deramus Ave., Kansas City, MO 64120 | 816.410.7346 | milbankworks.com
12kW
Home Standby Accessories
7
12kW
Maintenance kit
MG121822
Complete with special UL air filter, pre-cleaner, spark plugs, oil filter and synthetic oil.
Cold weather kit
MG111102
Complete with an oil heater and battery warmer - both thermostatically controlled to heat up
when the temperature drops, ensuring smooth starting and engine operation. Tested at -25ºF.
Milbank | 4801 Deramus Ave., Kansas City, MO 64120 | 816.410.7346 | milbankworks.com
8
17 & 20kW
17 & 20kW
Home Standby Generators
Models
17kW1 | MG17001
20kW1 | MG20003
Innovative and intelligent, the 171 &
20kW1 deliver the high performance
homeowners expect. The unique
airflow technology coupled with sounddampening compressed fiberglass
make these some of the quietest
generators in the industry, a diplomatic
choice to keep neighbors happy.
Features
Ideal for medium- to large-sized homes
Built for High-Performance – These units are built with
the extremely reliable Briggs & Stratton Commercial
Grade Vanguard Engine. Proven in applications around
the world, Vanguard’s OHV technology provides
superior balance, low vibration and emissions, and
better fuel economy. Our electronic governors
also provide stable, consistent power for sensitive
electronics and today’s most advanced appliances.
Comprehensive Warranty2 – Both the 17kW1 and
20kW1 units include a four-year limited warranty2 - one
of the best comprehensive parts and labor warranties
in the industry. At Milbank, we stand behind our
products (for more than 85 years!), making it easy for
our customers to work with us.
Durable Enclosure & Base – Our enclosures are made
from the same rust-resistant, durable Galvanneal
steel that is found in the automotive industry and
features an automotive-grade paint process which
results in protection against chipping and abrasions.
Our enclosures and base can endure temperatures of
more than double that of aluminum and plastic.
Homeowner Safety & Protection – We take
protection to a whole new level - the 17kW1 and
20kW1 come with an external, automatic gas shut-
off valve, low pressure regulator and a thermallyprotected fuel system which automatically shuts down
the unit during an emergency (not found on any
other competing generator in its class). These units
also feature a corrugated metal fuel hose for safer
operation.
Flexible Placement3 – Tested against the tough
National Fire Protection Agency 37 standard, Milbank
171 & 20kW1 standby generators can be placed as
close as 18” from the home providing more placement
options in your yard*– perfect for tight lot lines.
Innovative Airflow Technology – This feature provides
better efficiency and longer life, and makes the 171 &
20kW1 our quietest generators. With the engine and
alternator intakes located in the rear, front ventilation
pushes the heat and carbon monoxide away from the
house - protecting homes, shrubs and landscaping
from damage.
4
YEAR
WARRANTY
1
This generator is rated in accordance with UL (Underwriters Laboratories) 2200 (stationary engine generator assemblies) and CSA (Canadian Standards Association) standard
C22.2 No. 100-04 (motors and generators). 2Warranty details are available at milbankworks.com. 3Installations must strictly comply with all applicable codes, industry standards,
laws, regulations and provided installation manual. Running engines give off carbon monoxide, an odorless, colorless, poisonous gas so it is important to keep exhaust gas
away from any windows, doors, ventilation intakes or crawl spaces. The installation manual contains specific instructions related to generator placement in addition to NFPA
37, including the requirement that carbon monoxide detectors be installed and maintained in your home. Milbank reserves the right to make changes in specifications and
features shown without notice or discontinue the product described at any time without notice or obligation. Other Generator/Automatic Transfer switch manufacturers’
products are not compatible with Milbank Home Generator Systems.
Milbank | 4801 Deramus Ave., Kansas City, MO 64120 | 816.410.7346 | milbankworks.com
9
17 & 20kW
17 & 20kW
Home Standby Accessories
maintenance kit
Wireless monitor
MG151822
MG622901
Complete with special UL air filter, pre-cleaner,
spark plugs, oil filter and synthetic oil.
Easy, trouble-free monitoring is a reality
with the new Milbank Basic Wireless
Monitor. Place the wireless monitor in
your home and know your generator
is working without ever
having
to
go
outside.
cold weather kit
wireless router
MG623101
MG623501
Complete with a dual oil heater and battery
warmer - both thermostatically controlled to
heat up when the temperature drops, ensuring
smooth starting and engine operation. Tested
at -25ºF.
A signal enhancement to
overcome obstructions. Recommended for applications
with distances of 100 feet or
more
transfer switch
MG4002001
The dual 400 amp / split 200 amp automatic transfer switch replaces the
need for two 200 Amp transfer switches in a standard split 400A service
home with two 200 Amp distribution panels. See page 17 for more details.
Only available with MG20003, MG35001, MG45001 and MG60001.
Milbank | 4801 Deramus Ave., Kansas City, MO 64120 | 816.410.7346 | milbankworks.com
10
30 & 35 kW
30 & 35kW
Commercial Standby Generators
models
30kW1 | MG30208 [3ø]
30kW1 Three-Phase 208V
35kW1 | MG35001
Ideal for large homes and businesses with increasing electrical
demands.
features
Durable Outdoor Enclosure – Galvaneal steel
provides years of rust-resistant, outdoor protection
- perfect for extreme weather conditions.
Premier Commercial Warranty – Compared to
other one- and two-year commercial warranties,
Milbank offers a four-year limited warranty2 that
includes parts and labor. It’s one of the most
comprehensive warranties in the commercial
standby power industry.
Industrial-Grade GM VortecTM Engine – This
world class four-cylinder GM VortecTM engine
operates at 1800 RPM - quieter and more fuelefficient than 3600 RPM engines.
Longer Product Life – A commercial generator is
a big investment. Designed with a longer life span,
Milbank’s commercial units have lower engine/
alternator speeds and limited temperature rise.
Power Management Technology – Used with our
single-phase, liquid-cooled generators, Milbank’s
automatic transfer switch comes standard with
our patented power management technology
managing up to (2) load-dependent air conditioner
units while keeping critical home or business
applications powered. (For more information on
our Power Management Technology, see page
16).
Three-Phase Automatic Transfer Switches –
Used with our three-phase generators, Milbank
offers DynaGen and GE Zenith automatic transfer
switches that switch at high speeds for today’s
most critical loads. For more details on our threephase transfer switches please see our specs
pages 30-31.
4
YEAR
WARRANTY
1
This generator is rated in accordance with UL (Underwriters Laboratories) 2200 (stationary engine generator assemblies) and CSA (Canadian Standards Association) standard
C22.2 No. 100-04 (motors and generators). 2Warranty details are available at milbankworks.com.
Installations must strictly comply with all applicable codes, industry standards, laws, regulations and provided installation manual. Running engines give off carbon monoxide,
an odorless, colorless, poisonous gas so it is important to keep exhaust gas away from any windows, doors, ventilation intakes or crawl spaces. The installation manual contains
specific instructions related to generator placement in addition to NFPA 37, including the requirement that carbon monoxide detectors be installed and maintained in your
home. Milbank reserves the right to make changes in specifications and features shown without notice or discontinue the product described at any time without notice or
obligation. Other Generator/Automatic Transfer switch manufacturers’ products are not compatible with Milbank Home Generator Systems.
Milbank | 4801 Deramus Ave., Kansas City, MO 64120 | 816.410.7346 | milbankworks.com
30 & 35kW
Commercial Standby Accessories
maintenance kit
30kW [3ø] | MG300022
35kW | MG300022
Complete with special UL air filter, pre-cleaner, spark plugs, oil filter
and synthetic oil.
Engine block heater
30kW | MG624101
35kW | MG624101
Designed for maximum engine performance, engine block heaters
keep engines warm, allowing for faster and easier startups in cold
weather. Milbank 35KW, 45kW and 60kW standby generators are
tested to start at -20ºF using this kit. Each kit includes an engine
block heater and bracket.
transfer switch
MG4002001
The dual 400 amp / split 200 amp automatic transfer switch
replaces the need for two 200 Amp transfer switches in a standard
split 400A service home with two 200 Amp distribution panels. See
page 17 for more details. Only available with MG20003, MG35001,
MG45001 and MG60001.
Milbank | 4801 Deramus Ave., Kansas City, MO 64120 | 816.410.7346 | milbankworks.com
11
30 & 35kW
12
45 & 48kW
45 & 48kW
Commercial Standby Generators
models
45kW1 | MG450001
48kW1 | MG450208 [3ø]
48kW1 Three-Phase 208V
Ideal for large homes and businesses with increasing electrical
demands.
features
Durable Outdoor Enclosure – Galvaneal steel
provides years of rust-resistant, outdoor protection
- perfect for extreme weather conditions.
Premier Commercial Warranty – Compared to
other one- and two-year commercial warranties,
Milbank offers a four-year limited warranty2 that
includes parts and labor. It’s one of the most
comprehensive warranties in the commercial
standby power industry.
Industrial-Grade GM VortecTM Engine – This
world class eight-cylinder GM VortecTM engine
operates at 1800 RPM - quieter and more fuelefficient than 3600 RPM engines.
Longer Product Life – A commercial generator is
a big investment. Designed with a longer life span,
Milbank’s commercial units have lower engine/
alternator speeds and limited temperature rise.
Power Management Technology – Used with our
single-phase, liquid-cooled generators, Milbank’s
automatic transfer switch comes standard with
our patented power management technology
managing up to (2) load-dependent air conditioner
units while keeping critical home or business
applications powered. (For more information on
our Power Management Technology, see page
16).
Three-Phase Automatic Transfer Switches –
Used with our three-phase generators, Milbank
offers DynaGen and GE Zenith automatic transfer
switches that switch at high speeds for today’s most
critical loads. For more details on our three-phase
transfer switches please see the specifications on
pages 30-31.
4
YEAR
WARRANTY
1
This generator is rated in accordance with UL (Underwriters Laboratories) 2200 (stationary engine generator assemblies) and CSA (Canadian Standards Association) standard
C22.2 No. 100-04 (motors and generators). 2Warranty details are available at milbankworks.com.
Installations must strictly comply with all applicable codes, industry standards, laws, regulations and provided installation manual. Running engines give off carbon monoxide,
an odorless, colorless, poisonous gas so it is important to keep exhaust gas away from any windows, doors, ventilation intakes or crawl spaces. The installation manual contains
specific instructions related to generator placement in addition to NFPA 37, including the requirement that carbon monoxide detectors be installed and maintained in your
home. Milbank reserves the right to make changes in specifications and features shown without notice or discontinue the product described at any time without notice or
obligation. Other Generator/Automatic Transfer switch manufacturers’ products are not compatible with Milbank Home Generator Systems.
Milbank | 4801 Deramus Ave., Kansas City, MO 64120 | 816.410.7346 | milbankworks.com
45 & 48kW
Commercial Standby Accessories
maintenance kit
45kW | MG450022
48kW [3ø] | MG450022
Complete with special UL air filter, pre-cleaner, spark plugs, oil filter
and synthetic oil.
Engine block heater
45kW | MG624201
48kW [3ø] | MG624201
Designed for maximum engine performance, engine block heaters
keep engines warm, allowing for faster and easier startups in cold
weather. Milbank 35KW, 45kW and 60kW standby generators are
tested to start at -20ºF using this kit. Each kit includes an engine
block heater and bracket.
transfer switch
MG4002001
The dual 400 amp / split 200 amp automatic transfer switch
replaces the need for two 200 Amp transfer switches in a standard
split 400A service home with two 200 Amp distribution panels. See
page 17 for more details. Only available with MG20003, MG35001,
MG45001 and MG60001.
Milbank | 4801 Deramus Ave., Kansas City, MO 64120 | 816.410.7346 | milbankworks.com
13
45 & 48kW
14
60 & 62kW
60 & 62kW
Commercial Standby Generators
models
60kW1 | MG60001
62kW1 | MG60208 [3ø]
62kW1 Three-Phase 208V
Ideal for large homes and businesses with increasing electrical
demands.
features
Durable Outdoor Enclosure – Galvaneal steel
provides years of rust-resistant, outdoor protection
- perfect for extreme weather conditions.
Premier Commercial Warranty – Compared to
other one- and two-year commercial warranties,
Milbank offers a four-year limited warranty2 that
includes parts and labor. It’s one of the most
comprehensive warranties in the commercial
standby power industry.
Industrial-Grade GM VortecTM Engine – This
world class eight-cylinder GM VortecTM engine
operates at 1800 RPM - quieter and more fuelefficient than 3600 RPM engines.
Longer Product Life – A commercial generator is
a big investment. Designed with a longer life span,
Milbank’s commercial units have lower engine/
alternator speeds and limited temperature rise.
Power Management Technology – Used with our
single-phase, liquid-cooled generators, Milbank’s
automatic transfer switch comes standard with
our patented power management technology
managing up to (2) load-dependent air conditioner
units while keeping critical home or business
applications powered. (For more information on
our Power Management Technology, see page
16).
Three-Phase Automatic Transfer Switches –
Used with our three-phase generators, Milbank
offers DynaGen and GE Zenith automatic transfer
switches that switch at high speeds for today’s
most critical loads.
4
YEAR
WARRANTY
1
This generator is rated in accordance with UL (Underwriters Laboratories) 2200 (stationary engine generator assemblies) and CSA (Canadian Standards Association) standard
C22.2 No. 100-04 (motors and generators). 2Warranty details are available at milbankworks.com.
Installations must strictly comply with all applicable codes, industry standards, laws, regulations and provided installation manual. Running engines give off carbon monoxide,
an odorless, colorless, poisonous gas so it is important to keep exhaust gas away from any windows, doors, ventilation intakes or crawl spaces. The installation manual contains
specific instructions related to generator placement in addition to NFPA 37, including the requirement that carbon monoxide detectors be installed and maintained in your
home. Milbank reserves the right to make changes in specifications and features shown without notice or discontinue the product described at any time without notice or
obligation. Other Generator/Automatic Transfer switch manufacturers’ products are not compatible with Milbank Home Generator Systems.
Milbank | 4801 Deramus Ave., Kansas City, MO 64120 | 816.410.7346 | milbankworks.com
60 & 62kW
Commercial Standby Accessories
maintenance kit
60kW | MG450022
62kW [3ø] | MG450022
Complete with special UL air filter, pre-cleaner, spark plugs, oil filter
and synthetic oil.
Engine block heater
60kW | MG624201
62kW [3ø] | MG624201
Designed for maximum engine performance, engine block heaters
keep engines warm, allowing for faster and easier startups in cold
weather. Milbank 35KW, 45kW and 60kW standby generators are
tested to start at -20ºF using this kit. Each kit includes an engine
block heater and bracket.
transfer switch
MG4002001
The dual 400 amp / split 200 amp automatic transfer switch
replaces the need for two 200 Amp transfer switches in a standard
split 400A service home with two 200 Amp distribution panels. See
page 17 for more details. Only available with MG20003, MG35001,
MG45001 and MG60001.
Milbank | 4801 Deramus Ave., Kansas City, MO 64120 | 816.410.7346 | milbankworks.com
15
60 & 62kW
MANAGEMENT
TECHNOLOGY
3
YEAR
WARRANTY
3
YEAR
WARRANTY
18
Transfer Switches
Transfer
switches
DynaGen
Milbank offers DynaGen and GE transfer switches for three-phase standby generator systems
and single phase generator systems where applicable.
DynaGen’s Vigilant Series automatic transfer switch is designed to automatically transfer critical
loads in the event of a power outage. It consists of a simple, rugged design while maintaining the
flexibility required to meet the needs of residential, commercial and light industrial applications.
DynaGen switches include a 5-year limited warranty.
features
Corrosion Protection – The enclosure on the DynaGen automatic transfer switches is made
from duplex coated, galvanized G90 grade steel and meets American society for Testing and
Materials (ASTM) standard A653. The service life of the galvanized steel enclosures is more than
twice that of regular steel.
Externally Accessible Controls – The user-friendly interface gives you full control of the exerciser
clock, allowing users to set a specific time or day in which to perform a test for a load or no load
condition.
Note: MG070033 must be ordered with a DynaGen switch for compatibility.
5
YEAR
WARRANTY
Installers are required to review local codes prior to installation to determine if a transfer switch with separate disconnect is required. All installations must strictly comply
with all applicable codes, industry standards, laws and regulations, and installation manual. Improper installation will void all warranties. Milbank reserves the right to make
changes in specifications and features shown without notice or discontinue the product described at any time without notice or obligation. Other Generator/Automatic
Transfer switch manufacturers’ products are not compatible with Milbank Home Generator Systems.
Milbank | 4801 Deramus Ave., Kansas City, MO 64120 | 816.410.7346 | milbankworks.com
Transfer Switches
GE Zenith
19
Transfer
switches
Built for residential and light commercial applications, GE Zenith transfer switches provide a
continuous source of power for critical loads by automatically transferring power from the utility to the back up generator. Designed for emergency standby applications, they incorporate a
double-throw, mechanically interlocked contactor mechanism.
features
ZTX & ZTG Series – Ideal for residential, commercial and light industrial applications. Sizes
200, 400 & 600 Amp Nema 3R, 120/208V.
GE Zenith Microprocessor – Equipped with the MX150 microprocessor panel which controls
the operation and display status of the transfer switch’s position, timers, and available sources.
*Review local codes to determine if a transfer switch with separate service entrance disconnect is required. Installers are required to review local codes prior to installation to
determine if a transfer switch with separate disconnect is required. All installations must strictly comply with all applicable codes, industry standards, laws and regulations,
and installation manual. Improper installation will void all warranties. Milbank reserves the right to make changes in specifications and features shown without notice or
discontinue the product described at any time without notice or obligation. Other Generator/Automatic Transfer switch manufacturers’ products are not compatible with
Milbank Home Generator Systems.
Milbank | 4801 Deramus Ave., Kansas City, MO 64120 | 816.410.7346 | milbankworks.com
20
5500-7500W
5500-7500W
Portable Generators
From campsite to job site, from tent to trailer, and all points in between, Milbank’s rugged, dependable portable generators put the power in your hands to get the job done. From 5500W
to 7500W, trust in Milbank’s comprehensive line of EPA–compliant portable generator solutions
to deliver power when you want it, wherever you need it.
3
EPA
YEAR
WARRANTY
COMPLIANT
features
The Complete Package – Includes everything
you need in one box to hit the ground running –
wheel kit, handle kit (some assembly required),
oil, funnel, and tool kit
Iron–Sleeved Engine – Our engine sleeves are
made with cast iron for long–lasting durability
and low maintenance
Simplified Operator Control Center – Clean,
Quiet Operation – The Pulse–Flo muffler allows simple and easy to use to harness the power
us to boast one of the quietest generators on you need, when you need it.
the market
3-Year Limited Parts & Labor Warranty - One
Exclusive VR System – Voltage–regulated of the best comprehensive parts and labor
power protection for all your electronic needs warranties in the industry.
Running engines give off carbon monoxide, an odorless, colorless, poisonous gas so it is important to keep exhaust gas away from any windows, doors, ventilation
intakes or crawl spaces. Not for indoor use. Milbank reserves the right to make changes in specifications and features shown without notice or discontinue the
product described at any time without notice or obligation.
Milbank | 4801 Deramus Ave., Kansas City, MO 64120 | 816.410.7346 | milbankworks.com
21
5500-7500W
5500-7500W
Portable Generators
MANUAL
START
5500W | MPG55003
6000W | MPG6000S
STORM
UNIT
+
Comes with a 25’ twist–
lock, 10 gauge, 30 amp
power cord for added
convenience
ELECTRIC START
6500W | MPG6500E
7000W | MPG70002E
Running engines give off carbon monoxide, an odorless, colorless, poisonous gas so it is important to keep exhaust gas away from any windows, doors, ventilation
intakes or crawl spaces. Not for indoor use. Milbank reserves the right to make changes in specifications and features shown without notice or discontinue the
product described at any time without notice or obligation.
Milbank | 4801 Deramus Ave., Kansas City, MO 64120 | 816.410.7346 | milbankworks.com
7500W | MPG75002E
22
Contractor Benefits
contractor
benefits
Authorized Generator Technician Certification
RIZED GENERAT
HO
O
T
U
R
A
BECOME A MILBANK AUTHORIZIED GENERATOR TECHNICIAN
TEC
HNICIAN
Become an Authorized Generator Technician with Milbank’s
certification class. This 8-hour technical course provides
electrical contractors with the knowledge needed to install
and perform warranty repairs on Milbank home standby
generator units.
This hands-on certification training allows contractors to
experience a simulated power outage and generator startup process, view live sequence and industry-leading power
management technology, and understand Milbank’s live
load management and load shedding capabilities.
Milbank’s generator certification class is required for
any licensed electrical contractor who would like to
be authorized to perform field repairs under Milbank’s
warranty policies and procedures. This certification is not
required for installing Milbank home generator systems or
performing routine maintenance.
Contact Chad Palmer, Technical Services Specialist, or your local electrical
distributor for more information.
Milbank | 4801 Deramus Ave., Kansas City, MO 64120 | 816.410.7346 | milbankworks.com
Distributor Benefits
Milbank OneSERT
23
distributor
benefits
The next natural disaster affecting your area is not a matter
of IF, it’s a matter of WHEN. And when that time comes, you
need immediate world-class service. That’s why Milbank offers
OneSERT, your One-Stop Emergency Response Team to get you
the product you need, when you need it.
During normal business hours 8 a.m. - 5 p.m. CST - call our office
at 816-410-7346.
A single call to 800-227-5564 sets the OneSERT team in motion:
• After-hours call support 24 hours per day, 365 days per year
• Single point of contact to coordinate all aspects of the
order
• Expedited product availability
• Optional solutions on product applications
• Fast, reliable service
When a natural disaster strikes your area, put the country’s
leading manufacturer of meter sockets and related products on
your team. Call Milbank’s OneSERT emergency line at 800-2275564 or milbankworks.com/OneSERT.
Note: this program as well as emergency portable generator
stock (pictured below) is available only to our current electrical
distributors.
During Hurricane
Sandy & Hurricane Irene,
Milbank was able to react quickly and
shipped thousands of portable generators
to our electrical distributors across the
country!
Milton Milbankian
800 - 227 - 5564
Milbank | 4801 Deramus Ave., Kansas City, MO 64120 | 816.410.7346 | milbankworks.com
24
Wall-mounted
charging dock
Wall-Mounted Charging Docks
Electric Vehicle Supply Equipment (EVSE)
Milbank’s level II electric vehicle car charger delivers a full charge
to an electric vehicle (EV) or plug-in electric vehicle (PHEV) in just
a few hours. With AC power, electricity is transferred from the
charging station to the car’s on-board charger.
This space-saving, wall-mounted design is ideal for a home
garage - owners can conveniently charge vehicles while sleeping,
enjoying a meal or spending time with friends and family.
models
Wall-Mount | MEVSE-RS
features
• Industry standard SAE J1772 connector
• Auto restart in event of power outage or ground fault
• Americans with Disabilities Act (ADA) compliant installation
• Integrated cable stowage
• Underwriters Laboratory (UL) listed
• Breakaway safety cable
• Optional pedestal mount
• Weather-resistant NEMA 4 enclosure
• 3-year warranty (parts)
3
YEAR
WARRANTY
Milbank | 4801 Deramus Ave., Kansas City, MO 64120 | 816.410.7346 | milbankworks.com
25
Pedestal Charging Stations
pedestal
charging
station
Electric Vehicle Supply Equipment (EVSE)
Milbank’s industrial-grade enclosure is ideal for EV fleet operations.
With secure, lockable cabinets, you can control the use of your
charging stations.
models
Pedestal | CPEV0111JSW1
features
MEVSE-RS features plus:
• Secure, lockable cabinet to prevent theft and vandalism
• In-use front door allowing user to close and lock the access door
while charging the EV or PHEV
• Lockable back service panel to allow only the contractor access
for installation and service
• Dual feed lugs for loop feeding multiple units
• 40A 2P breaker disconnect included inside the back panel for
power shutdown
• Pre-wired at the factory for easy installation
• Optional pad mount base installed in concrete for pedestal attachment, eliminating the need
for drilling/installing anchor bolts
Dual pedestal
available by quote
Customize your
EVSE units!
Milbank | 4801 Deramus Ave., Kansas City, MO 64120 | 816.410.7346 | milbankworks.com
3
YEAR
WARRANTY
26
Technical Specifications
8-20kW
8-20kW
Model Number
Watts LP/NG
Main Breaker (Amps)
Amps LP/NG
Voltage
Alternator
Voltage Regulation
Fuel Type
Sound Rating (at 7 Meters)
Full Pressure Lubrication
Overcrank Protection
Dimensions (in inches: L x W x H)
Weight (Generator Only)
MG08001
8kW
MG10002
10kW
8,000W (LP) / 7,200W (NG)
10,000W (LP) / 9,000W (NG)
35
50
33.3 / 29.9
41.7 / 37.5
120/240V AC, Single Phase, 1.0 pf
120/240V AC, Single Phase, 1.0 pf
Brushed
Brushed
Automatic
Automatic
Propane (LP), Natural Gas
Propane (LP), Natural Gas
76.8 dB
72.3 dB
Yes
Yes
Yes
Yes
28 x 24.4 x 35.1
28 x 24.4 x 35.1
252
272
Vertical
Vertical
3 year P/L (limited)
3 year P/L (limited)
Yes
Yes
Cold Weather Kit
MG626201(sold separately)
MG111102 (sold separately)
Maintenance Kit
MG080022 (sold separately)
MG101222 (sold separately)
Orientation
Limited Warranty*
NFPA-37 Compliant
Hour Meter, Battery Charger, Steel Base, External Automatic Shut-off Valve, Low Pressure Regulator,
Thermally Protected Fuel System and Synthetic Oil
Turnkey Extras Included
Fuel Characteristics
Fuel Consumption | LP
(at 1⁄2 load)
37.6 Ft3/Hr
1.04 Gal/Hr
94,000 BTU
42.8 Ft3/Hr
1.18 Gal/Hr
107,000 BTU
Fuel Consumption | NG
(at 1⁄2 load)
94 Ft3/Hr
94,000 BTU
111 Ft3/Hr
111,000 BTU
Fuel Consumption | LP
(at full load)
56.4 Ft3/Hr
1.57 Gal/Hr
141,000 BTU
65.6 Ft3/Hr
1.82 Gal/Hr
164,000 BTU
Fuel Consumption | NG
(at full load)
121 Ft3/Hr
121,000 BTU
169 Ft3/Hr
169,000 BTU
12 Volt DC
12 Volt DC
540 CCA / 800 CCA
540 CCA / 800 CCA
Wet Lead Acid
Wet Lead Acid
Battery Requirements
Volts (standard/cold start)
Minimum AMPS (standard/cold start)
Type
Terminal Hardware
Top Post Type
Top Post Type
Dimensions (Max)
BCI size 26 or 51 (BCI size 24 cold start, less than
32°F)
BCI size 26 or 51 (BCI size 24 cold start, less than
32°F)
500 cc Briggs & Stratton Intek
570 cc Briggs & Stratton Commercial
Vanguard™V-Twin
1 Cylinder - 4 Cycle
2 Cylinder - 4 Cycle
3600
3600
Engine Specifications
Engine
Cylinders
Operating RPM
These generators are rated in accordance with UL 2200 and CSA Standard C22.2 No. 100-04. Fuel consumption rates are estimated based on normal operating conditions. Generator operation may be greatly affected by elevation and the cycling operation of multiple electrical appliances - fuel flow rates may vary depending on
these factors. Installations must strictly comply with all applicable codes, industry standards, laws and regulations, installation manual. Other Generator/Automatic
Transfer Switch manufacturers products are not compatible with Milbank Home Generator Systems. Improper installation voids all warranty. Milbank reserves the right
to make changes in specifications and features shown without notice or discontinue the product described at any time without notice or obligation.
Milbank | 4801 Deramus Ave., Kansas City, MO 64120 | 816.410.7346 | milbankworks.com
27
Technical Specifications
8-20kW
8-20kW
MG12002
12kW
MG17001
17kW
MG20003
20kW
12,000W (LP) / 10,800W (NG)
17,000W (LP) / 15,300W (NG)
20,000W (LP) / 18,000W (NG)
60
80
100
50 / 45
71 / 63.9
83.3 / 74.9
120/240V AC, Single Phase, 1.0 pf
120/240V AC, Single Phase, 1.0 pf
120/240V AC, Single Phase, 1.0 pf
Brushed
Brushed
Brushed
Automatic
Automatic
Automatic
Propane (LP), Natural Gas
Propane (LP), Natural Gas
Propane (LP), Natural Gas
74.5 dB
69.1 dB, 3600 RPM, per ISO 3744
69.1 dB, 3600 RPM, per ISO 3744
Yes
Yes
Yes
Yes
Yes
Yes
34.6 x 39.4 x 38.5
48 x 34 x 31
48 x 34 x 31
535
484
500
Vertical
Horizontal
Horizontal
4 year P/L (limited)
4 year P/L (limited)
4 year P/L (limited)
Yes
Yes
Yes
MG111102 (sold separately)
MG623101 (sold separately)
MG623101 (sold separately)
MG121822 (sold separately)
MG151822 (sold separately)
MG151822 (sold separately)
Hour Meter, Battery Charger, Steel Base, External Automatic Shut-off Valve, Low Pressure Regulator, Thermally Protected Fuel System and
Synthetic Oil
51 Ft3/Hr
1.42 Gal/Hr
127,000 BTU
74 Ft3/Hr
2.06 Gal/Hr
185,000 BTU
83 Ft3/Hr
2.31 Gal/Hr
207,500 BTU
119.46 Ft3/Hr
119,460 BTU
170 Ft3/Hr
170,000 BTU
187 Ft3/Hr
187,000 BTU
85.32 Ft3/Hr
2.37 Gal/Hr
213,000 BTU
118 Ft3/Hr
3.28 Gal/Hr
295,000 BTU
135 Ft3/Hr
3.75 Gal/Hr
337,500 BTU
197 Ft3/Hr
197,000 BTU
248 Ft3/Hr
248,000 BTU
260 Ft3/Hr
260,000 BTU
12 Volt DC
12 Volt DC
12 Volt DC
600 CCA
540 CCA / 630 CCA
540 CCA / 630 CCA
Absorbed Glass Mat
Wet Lead Acid
Wet Lead Acid
M6 Hardware
Top Post Type
Top Post Type
5.5”W x 9”L x 8.9”H (including posts)
BCI size 26 (BCI size 75 cold start, less than
32°F)
BCI size 26 (BCI size 75 cold start, less than
32°F)
803 cc Briggs & Stratton Professional SeriesTM
V-Twin
993 cc Briggs & Stratton Commercial Vanguard™ V-Twin
2 Cylinder - 4 Cycle
2 Cylinder - 4 Cycle
2 Cylinder - 4 Cycle
3600
3600
3600
Milbank | 4801 Deramus Ave., Kansas City, MO 64120 | 816.410.7346 | milbankworks.com
28
Technical Specifications
30-60kW
30-60kW
Model Number
Watts LP/NG
Main Breaker (Amps)
Amps LP/NG
Voltage
MG30208
30kW [3ø]
MG35001
35kW
30,000W (LP) / 30,000W (NG)
35,000W (LP) / 32,000W (NG)
125
175
104 / 104
145 / 133
120/208V AC, Three Phase, .8 pf (139/240 3ø
available by quote)
120/240V AC, Single Phase, 1.0 pf
Alternator
Brushless
Brushless
Voltage Regulation
Automatic
Automatic
Propane (LP), Natural Gas
Propane (LP), Natural Gas
65dB
65dB
Full Pressure Lubrication
Yes
Yes
Overcrank Protection
Yes
Yes
84.4 x 39.5 x 42.5
84.4 x 39.5 x 42.5
1,470
1,470
Fuel Type
Sound Rating (at 7 Meters)
Dimensions (in inches: L x W x H)
Weight (Generator Only)
Orientation
Limited Warranty*
Horizontal
Horizontal
4 year P/L (limited)
4 year P/L (limited)
NFPA-37 Compliant
No
No
Engine Block Heater
MG624101 (sold separately)
MG624101 (sold separately)
Maintenance Kit
MG300022 (sold separately)
MG300022 (sold separately)
Hour Meter, Battery Charger, and API SL 10W-30
Oil
Hour Meter, Battery Charger, and API SL 10W-30
Oil
Fuel Consumption | LP
(at 1⁄2 load)
106 Ft3/Hr
2.8 Gal/Hr
265,000 BTU
117 Ft3/Hr
3.1 Gal/Hr
292,900 BTU
Fuel Consumption | NG
(at 1⁄2 load)
263 Ft3/Hr
263,000 BTU
282 Ft3/Hr
282,000 BTU
Fuel Consumption | LP
(at full load)
168 Ft3/Hr
4.4 Gal/Hr
420,000 BTU
186 Ft3/Hr
4.9 Gal/Hr
465,100 BTU
Fuel Consumption | NG
(at full load)
431 Ft3/Hr
431,000 BTU
458 Ft3/Hr
458,800 BTU
12 Volt DC
12 Volt DC
650 CCA
650 CCA
VRLA
(Valve Regulated Lead Acid)
VRLA
(Valve Regulated Lead Acid)
Terminal Hardware
Top Post Type
Top Post Type
Dimensions (Max)
7.5” x 11.25” x 10.0”
7.5” x 11.25” x 10.0”
GM VortecTM 3.0L Industrial Powertrain
GM VortecTM 3.0L Industrial Powertrain
Inline 4 Cylinder, 4-Cycle
Inline 4 Cylinder, 4-Cycle
1800
1800
Turnkey Extras Included
Fuel Characteristics
Battery Requirements
Volts (standard/cold start)
Minimum AMPS (standard/cold start)
Type
Engine Specifications
Engine
Cylinders
Operating RPM
These generators are rated in accordance with UL 2200 and CSA Standard C22.2 No. 100-04. Fuel consumption rates are estimated based on normal operating conditions. Generator operation may be greatly affected by elevation and the cycling operation of multiple electrical appliances - fuel flow rates may vary depending on
these factors. Installations must strictly comply with all applicable codes, industry standards, laws and regulations, installation manual. Other Generator/Automatic
Transfer Switch manufacturers products are not compatible with Milbank Home Generator Systems. Improper installation voids all warranty. Milbank reserves the right
to make changes in specifications and features shown without notice or discontinue the product described at any time without notice or obligation.
Milbank | 4801 Deramus Ave., Kansas City, MO 64120 | 816.410.7346 | milbankworks.com
29
Technical Specifications
30-60kW
30-60kW
MG450001
45kW
MG450208
48kW [3ø]
MG60001
60kW
MG60208
62kW [3ø]
45,000W (LP) / 45,000W (NG)
48,000W (LP) / 45,000W (NG)
60,000W (LP) / 55,000W (NG)
62,000W (LP) / 55,000W (NG)
225
200
300
225
187.5 / 187.5
167 / 156
220 / 229
215/ 191
120/240V AC, Single Phase, 1.0 pf
120/208V AC, Three Phase, .8 pf
(139/240 3ø available by quote)
120/240V AC, Single Phase, 1.0 pf
120/208V AC, Three Phase, .8 pf
(139/240 3ø available by quote)
Brushless
Brushless
Brushless
Brushless
Automatic
Automatic
Automatic
Automatic
Propane (LP), Natural Gas
Propane (LP), Natural Gas
Propane (LP), Natural Gas
Propane (LP), Natural Gas
66dB
65dB
66dB
66dB
Yes
Yes
Yes
Yes
Yes
Yes
98.4 x 39.5 x 44.5
98.4 x 39.5 x 44.5
98.4 x 39.5 x 4 4.5
98.4 x 39.5 x 4 4.5
1,890
1,890
2,120
2,120
Horizontal
Horizontal
Horizontal
Horizontal
4 year P/L (limited)
4 year P/L (limited)
4 year P/L (limited)
4 year P/L (limited)
No
No
No
No
MG624201 (sold separately)
MG624201 (sold separately)
MG624201 (sold separately)
MG624201 (sold separately)
MG450022 (sold separately)
MG450022 (sold separately)
MG450022 (sold separately)
MG450022 (sold separately)
Hour Meter, Battery Charger, and
API SL 10W-30 Oil
Hour Meter, Battery Charger, and
API SL 10W-30 Oil
Hour Meter, Battery Charger, and
API SL 10W-30 Oil
Hour Meter, Battery Charger, and
API SL 10W-30 Oil
173 Ft3/Hr
4.5 Gal/Hr
432,500 BTU
183 Ft3/Hr
4.8 Gal/Hr
462,500 BTU
200 Ft3/Hr
5.2 Gal/Hr
500,000 BTU
200 Ft3/Hr
5.2 Gal/Hr
500,000 BTU
429 Ft3/Hr
429,000 BTU
429 Ft3/Hr
429,000 BTU
463 Ft3/Hr
463,000 BTU
463 Ft3/Hr
463,000 BTU
294 Ft3/Hr
7.7 Gal/Hr
735,000 BTU
314 Ft3/Hr
8.2 Gal/Hr
785,000 BTU
345 Ft3/Hr
9 Gal/Hr
862,500 BTU
345 Ft3/Hr
9 Gal/Hr
862,500 BTU
717 Ft3/Hr
717,000 BTU
717 Ft3/Hr
717,000 BTU
788 Ft3/Hr
788,000 BTU
788 Ft3/Hr
788,000 BTU
12 Volt DC
12 Volt DC
12 Volt DC
12 Volt DC
650 CCA
650 CCA
650 CCA
650 CCA
VRLA
(Valve Regulated Lead Acid)
VRLA
(Valve Regulated Lead Acid)
VRLA
(Valve Regulated Lead Acid)
VRLA
(Valve Regulated Lead Acid)
Top Post Type
Top Post Type
Top Post Type
Top Post Type
7.5” x 11.25” x 10.0”
7.5” x 11.25” x 10.0”
7.5” x 11.25” x 10.0”
7.5” x 11.25” x 10.0”
GM VortecTM 5.0L Industrial Powertrain
GM VortecTM 5.0L Industrial Powertrain
GM VortecTM 5.7L Industrial Powertrain
GM VortecTM 5.7L Industrial Powertrain
8 Cylinder, 4-Cycle
8 Cylinder, 4-Cycle
8 Cylinder, 4-Cycle
8 Cylinder, 4-Cycle
1800
1800
1800
1800
Milbank | 4801 Deramus Ave., Kansas City, MO 64120 | 816.410.7346 | milbankworks.com
30
Technical Specifications
Transfer
Switches
Model
Transfer Switches
MG0503120
MG1003162
MG1003002
MG2003002
MG1003992
MG08001
MG10002
MG08001
MG10002
MG12002
MG17001
MG20003
MG08001
MG10002
MG12002
MG17001
MG20003
MG08001
MG10002
MG12002
MG17001
MG20003
MG08001
MG10002
MG12002
MG17001
MG20003
Single Phase 240V
Single Phase 240V
Single Phase 240V
Single Phase 240V
Single Phase 240V
3 Years
3 Years
3 Years
3 Years
3 Years
12
16
Whole House
Whole House
Whole House
Amps
50A
100A
200A
200A
100A
Service entrance disconnect
No
No
No
No
Yes
14.25” x 6” x 21”
14” x 6” x 24”
12" x 6" x 16"
12” x 6” x 22”
16” x 7” x 22”
29 lbs.
39 lbs.
24 lbs.
37 lbs.
38 lbs.
Compatible generator
units
Phase
Limited Warranty
Circuits
Dimensions (L x W x H)
Weight
120/240 Voltage, 2 Poles, 60Hz
NEMA 3R Enclosure, UL 1008 Listed
Common features
Power management
No
Patented Power Management Technology Included
*Must order part #MG07033 to be compatible (contact Milbank sales office for questions).
**Can only be ordered with a home standby generator.
Installer is required to review local codes prior to installation to determine if a transfer switch with separate service disconnect is required. All installations must strictly comply with all applicable
codes, industry standards, laws and regulations, installation manual. Other Generator/Automatic Transfer Switch manufacturers products are not compatible with Milbank Home Generator Systems.
Improper installation voids all warranty. Milbank reserves the right to make changes in specifications and features shown without notice or discontinue the product described at any time without notice
or obligation.
Milbank | 4801 Deramus Ave., Kansas City, MO 64120 | 816.410.7346 | milbankworks.com
31
Technical Specifications
Transfer
Switches
Transfer Switches
MG2003992
MG1503992
MG2003993
MG0501440
MG4002001**
MG08001
MG10002
MG12002
MG17001
MG20003
MG08001
MG10002
MG12002
MG17001
MG20003
MG35001
MG450001
MG60001
Power Management
Upgrade - used in
conjunction with:
MG1003162
MG1003002
MG1003992
MG2003002
MG1503992
MG2003992
MG2003993
MG4002001
Single Phase 240V
Single Phase 240V
Single Phase 240V
Single Phase 240V
Single Phase 240V
3 Years
3 Years
3 Years
3 Years
3 Years
Whole House
Whole House
Whole House
(2) Central Air + (4) 50
Amp Relays + 2 low voltage lock outs
Whole House
200A
150A
200A
N/A
2 X 200A
Yes
Yes
Yes
N/A
Yes
33” x 10.25” x 19”
33” x 10.25” x 19”
33” x 10.25” x 19”
12” x 6” x 22”
37” x 7” x 23.70”
64 lbs.
64 lbs.
64 lbs.
64 lbs.
111 lbs.
Intelligent Power Management System manages
up to (4) additional high
wattage appliances for true
whole-house management.
NEMA 3R Enclosure,
UL1008 Listed
120/240 Voltage, 2 Poles,
60Hz, NEMA 3R, UL 1008
Listed
120/240 Voltage, 2 Poles, 60Hz
NEMA 3R Enclosure, UL 1008 Listed
Patented Power Management Technology Included
Milbank | 4801 Deramus Ave., Kansas City, MO 64120 | 816.410.7346 | milbankworks.com
MG20003
MG35001
MG450001
MG60001
32
Technical Specifications
Transfer
Switches
Model
Compatible generator
units
Phase
Limited Warranty
Transfer Switches
MGDY40011*
MGDY60011*
MG40001ZTX
MG20008ZTX
MG20003
MG35001
MG450001
MG60001
MG35001
MG450001
MG60001
MG20003
MG35001
MG450001
MG60001
MG302081
MG452081
MG602081
Single Phase 240V
Single Phase 240V
Single Phase 240V
Three Phase 208V
5 years
5 years
3 Years
3 Years
Circuits
N/A
N/A
N/A
N/A
Amps
400A
600A
400A
200A
No
No
No
No
30” x 13” x 48”
30” x 25” x 60”
24” x 15” x 46”
10” x 18” x 24”
Service entrance
disconnect
Dimensions (L x W x H)
Weight
Common features
Power management
190 lbs.
425 lbs.
168 lbs.
67 lbs.
120/240 Voltage, 2 Poles,
60Hz, External digital
display and LEDs, NEMA 3,
UL1008 Listed
120/240 Voltage, 2 Poles,
60Hz, External digital
display and LEDs, NEMA 3,
UL1008 Listed
120/240 Voltage, 2 Poles,
60Hz, Equipped with MX60
LED control panel, NEMA
3, UL1008 Listed
120/208 Voltage, 3 Poles,
60Hz, Equipped with MX60
LED control panel, NEMA
3, UL1008 Listed
No
No
No
No
*Must order part #MG07033 to be compatible (contact Milbank sales office for questions).
**Can only be ordered with a home standby generator.
Installer is required to review local codes prior to installation to determine if a transfer switch with separate service disconnect is required. All installations must strictly comply with all applicable codes,
industry standards, laws and regulations, installation manual. Improper installation voids all warranties. Milbank reserves the right to make changes in specifications and features shown without notice
or discontinue the product described at any time without notice or obligation.
Milbank | 4801 Deramus Ave., Kansas City, MO 64120 | 816.410.7346 | milbankworks.com
33
Technical Specifications
Transfer
Switches
Transfer Switches
MGDY40038*
MG40008ZTX
MG60208ZTG
MGDY60038*
MG302081
MG452081
MG602081
MG302081
MG452081
MG602081
MG302081
MG452081
MG602081
MG302081
MG452081
MG602081
Three Phase 208V
Three Phase 208V
Three Phase 208V
Three Phase 208V
5 years
3 Years
3 Years
5 years
N/A
N/A
N/A
N/A
400A
400A
600A
600A
No
No
No
No
30” x 13” x 48”
25” x 36” x 60”
19” x 24” x 66”
30” x 25” x 60”
190 lbs.
168 lbs.
224 lbs.
425 lbs.
120/208 Voltage, 3 Poles, 60Hz,
External digital display and LEDs,
NEMA 3, UL1008 Listed
120/208 Voltage, 3 Poles, 60Hz,
Equipped with MX60 LED control
panel, NEMA 3, UL1008 Listed
120/208 Voltage, 3 Poles, 60Hz,
Equipped with MX60 LED control
panel, NEMA 3, UL1008 Listed
120/208 Voltage, 3 Poles, 60Hz,
External digital display and LEDs,
NEMA 3, UL1008 Listed
No
No
No
No
Milbank | 4801 Deramus Ave., Kansas City, MO 64120 | 816.410.7346 | milbankworks.com
34
5500-7500W
Model
Technical Specifications
5500-7500W
MPG55003
MPG60001S
Manual
Manual
Rated Watts
5500 Watts
6000 Watts
Surge Watts
6750 Watts
7500 Watts
Starting
Run Time @ 1⁄2 Load
13 Hours
12 Hours
OHV, 4-Stroke
OHV, 4-Stroke
Engine Displacement
357cc
357cc
Warranty
3 years
3 years
Yes
Yes
Fuel Tank Capacity
6.6 Gallons
6.6 Gallons
Low Oil Shutdown
Yes
Yes
Engine
EPA Compliant
Automatic Fuel Shut-Off
Yes
Yes
Brush
Brush
27.2 x 20.5 x 22
27.2 x 20.5 x 22
172 lbs
183 lbs
31.5 x 21.4 x 23.2
31.5 x 21.4 x 23.2
184 lbs
195 lbs
2
2
2
2
1
1
21 Amps
23 Amps
12V DC Outlet
No
No
Oil Bottle (One bottle sized for engine:
SAE10W30)
Yes
Yes
Oil Funnel
Yes
Yes
Multi-Outlet
25’ Power Cord*
No
Yes
Battery
No
No
Wheel Kit
Yes
Yes
Tool Kit
Yes
Yes
Fuel Gauge
Yes
Yes
Hour Meter
No
No
Excitation
Unit Dimensions
L x W x H (inches)
Unit Weight
Carton Dimensions
L x W x H (inches)
Shipping Weight
Outlets (Quantity)
NEMA 5-20R (125VAC 20A Duplex)
20 Amp push button circuit breakers
NEMA L14-30R (125/250VAC 30A Twist
Lock)
2 Pole Toggle-Type Main Line Breaker
Milbank | 4801 Deramus Ave., Kansas City, MO 64120 | 816.410.7346 | milbankworks.com
35
Technical Specifications
5500-7500W
5500-7500W
MPG65001E
MPG70002E
MPG75002E
Electric
Electric
Electric
6500 Watts
7000 Watts
7500 Watts
8000 Watts
8500 Watts
9000 Watts
12 Hours
11 Hours
11 Hours
OHV, 4-Stroke
OHV, 4-Stroke
OHV, 4-Stroke
420cc
420cc
420cc
3 years
3 years
3 years
Yes
Yes
Yes
6.6 Gallons
6.6 Gallons
6.6 Gallons
Yes
Yes
Yes
Yes
Yes
Yes
Brush
Brush
Brush
27.2 x 20.5 x 22
27.2 x 20.5 x 22
27.2 x 20.5 x 22
193 lbs
194 lbs
199 lbs
31.5 x 21.4 x 23.2
31.5 x 21.4 x 23.2
31.5 x 21.4 x 23.2
205 lbs
206 lbs
211 lbs
2
2
2
2
2
2
1
1
1
25 Amps
27 Amps
27 Amps
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Milbank | 4801 Deramus Ave., Kansas City, MO 64120 | 816.410.7346 | milbankworks.com
36
Technical Specifications
EVSE
Model
EVSE
MEVSE-RS
CPEV0111JSW1
SAE J1772
SAE J1772
208VAC to 240VAC
208VAC to 240VAC
50Hz / 60Hz
50Hz / 60Hz
30A max
30A max
Operating Temperature
-30°C to 50°C
-22°F to 122°F
-30°C to 50°C
-22°F to 122°F
Storage/Transit
Temperature
-40°C to 60°C
-40°F to 160°F
-40°C to 60°C
-40°F to 160°F
Up to 95% non-condensing
Up to 95% non-condensing
12” x 12” x 8”
(approximate)
48” x 12” x 17.5”
(approximate)
10 lbs. (excluding cable)
120 lbs.
Up to 25' available
Up to 25' available
NEMA 4
NEMA 3R
UL and CUL listed
UL listed
Connector
Voltage
Frequency
Current
Humidity
Dimensions
(L x W x H)
Weight
Cord Length
Enclosure
Regulatory Compliance
Milbank | 4801 Deramus Ave., Kansas City, MO 64120 | 816.410.7346 | milbankworks.com
37
Milbank PowerGenTM Team
Milbank
PowerGENTM
Team
Contact Information
Jim Pederson
Justin robertson
Jack Hackathorn
Ryan Hennessy
Ryan Flood
elizabeth Mason
Energy Solutions Manager
[email protected]
m | (218) 731-3051
Inside Sales/Customer Service
[email protected]
o | (816) 410-7252
Energy Solutions Specialist
[email protected]
m | (816) 868-5285
Inside Sales/Customer Service
[email protected]
o | (816) 410-7295
Energy Solutions Manager
[email protected]
m | (816) 560-6803
Inside Sales/Customer Service
[email protected]
o | (816) 410-7255
4801 Deramus Ave., Kansas City, MO 64120 | [email protected] | o | (816) 410-7346 | f | (816) 231-7680
James russell
Technical Support Specialist
[email protected]
o | (816) 410-7251
m | (816) 560-7287
chad palmer
Technical Services Specialist
[email protected]
o | (816) 410-7253
m | (952) 486-1842
Milbank | 4801 Deramus Ave., Kansas City, MO 64120 | 816.410.7346 | milbankworks.com
38
Notes
Notes
Milbank | 4801 Deramus Ave., Kansas City, MO 64120 | 877.410.7346 | milbankworks.com
Notes
Milbank | 4801 Deramus Ave., Kansas City, MO 64120 | 877.410.7346 | milbankworks.com
39
Notes
For more information contact:
Milbank | 4801 Deramus Ave., Kansas City, MO 64120 | 877.483.5314 | milbankworks.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement