TEK 2 Data Sheet
TEK 2
Data Sheet
The TEK 2 is a new generation of TekMonitors designed with a more advanced microcontroller which supports power
over Ethernet (POE). Design of the TEK 2 makes it easier to install by using POE, an RJ-11 connector for the
TekSecurity and a separate connector for the occupancy sensor. The TEK 2 is designed for low cost installations and
does not have relays.
Use the TEK 2 to monitor and control video projectors, monitors and many other classroom or office space devices.
Unlike a control system that requires a knowledgeable programmer, the TEK 2 uses an intuitive step-by-step guide called
TekWizard. When monitoring a device, the TEK 2 can either operate autonomously by sending email messages for theft
detection, error condition and usage report, or with the TekManager asset management software using Version 3.0 or
higher.
Benefits
•
Improves equipment life by managing operational times
•
Reduces maintenance and energy costs
•
Adds reliable security to room devices
•
Improves equipment reliability
•
Increases administrator productivity
•
Easy to install with POE
•
Allows for replacing display device without changing control software
Features
•
Easy step-by-step system integration using TekWizard
•
Effortless management of devices using a view-all navigation
GUI
•
Remote monitoring and control from multiple Computers
•
Supports DHCP IP configuration using a proprietary
auto-discovery method
•
Compatible with any device having a data connection
and released protocol
•
Security management using a true hardware security
detection method to eliminate false email reports
•
Monthly email usage reports
•
Lamp and Maintenance timers with email reports
•
Event scheduling
•
Up to 30 Macro definitions with programmable logic
•
Inventory and asset management
•
Supports Occupancy Sensors
•
Supports TCP/IP and RS-232 communication for easy
control system operation
Contact us for additional information or to find an Authorized TEKVOX Dealer in your area.
11831 Radium Street, San Antonio, TX 78216 | 210.348.6565 o | 713.490.3135 f | [email protected] | www.TEKVOX.com
V030112
Device Specifications
Ethernet control interface
Connectors ...................................................................1 - RJ-45 male connector
Data rate.......................................................................10/100Base-T, half/full duplex with auto sensing
Protocols ......................................................................DHCP, ICMP (ping), TCP/IP, UDP, Telnet, SMTP
Link speed and duplex level are set to auto sensing.
IP address is set to DHCP.
TekSecurity interface
COM .............................................................................One - RS-232 serial (TX and RX only)
Security Input ............................................................... ESD protected input with internal 10K pull-up resistors
LED Output................................................................... One - open collector Darlington with 300 ma @ 24V
Pull-Up.......................................................................... One - 2.7K 1/4 watt resistors connected to 24V (9 mA)
Serial control interface
COM .............................................................................One - RS-232 serial (TX and RX only)
Default settings.............................................................9600, 8-bit, 1 stop bit, no parity
Occupancy sensor interface
Input .............................................................................One - ESD protected input with internal 10K programmable pull-up/Down
Logic Inputs
Inputs 1 – 2...................................................................Two - ESD protected inputs with internal 10K pull-up resistors, Logic High 2V,
Logic Low 0.8V
Outputs
Digital (DO 1-2) ............................................................Two - open collector Darlingtons with 300 ma @ 24V sourced to ground
Pull-Up (PU 1-2) ...........................................................Two - 2.7K 1/4 watt resistors connected to 24V (9 mA)
General
Power Supply (Optional)...............................................100-240VAC, 47/63 Hz, 0.5A, 15 watts
POE .............................................................................44 VDC, 350ma, PoE, PoE+
DC Power .....................................................................24 VDC 0.06 Amps, Max DC Power Out 0.65 Amps
Temperature/humidity ..................................................Storage -40° to +158°F (-40° to +70°C) /10% to 90%
Non-Condensing Operation ..........................................+32° to +122°F (0° to +50°C) /10% to 90%
Enclosure type ..............................................................Aluminum
Enclosure dimensions ..................................................1.0" H x 6.9" W x 3.0" L 2.52 cm H x 17.50 cm W x 7.59 cm L
(Depth excludes connectors.)
Product weight ..............................................................0.36 lbs (0.16 kg)
Shipping weight ............................................................2 lbs (1 kg)
Compliances.................................................................FCC Class B, Canadian ICES-003, CE
MTBF............................................................................30,000 hours
Warranty .......................................................................2 years parts and labor
Specifications are subject to change without notice.
Contact us for additional information or to find an Authorized TEKVOX Dealer in your area.
11831 Radium Street, San Antonio, TX 78216 | 210.348.6565 o | 713.490.3135 f | [email protected] | www.TEKVOX.com
V030112
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement