meter movements meter movement portable instruments sensitive

meter movements meter movement portable instruments sensitive
METER MOVEMENTS
METER
MOVEMENTS
Ammeter
SENSITIVE GALVANOMETER
PANEL MOUNT
AMMETER; VOLTMETER
EDUCATION METER SERIES
• Range: –300µA to 300µA
or –500µA to 500µA
• Internal Resistance:
80–125Ω / 2.4–3K or 40–80Ω /
1.5–2K
• Weight: 0.35 lb.
Designed to measure weak current or
the potential difference in DC circuit. It
may be used in experiments on bridge
measurement, thermocouple, electromagnetic induction and photoelectric effect etc.
Part No.
01SM1102
01GAL500UA
Description
Gal. –300µA to +300µA
Gal. –500µA to +500µA
Molded; transparent face. ±5%
tolerance. Panel mounting. Hole:
2 3/8" dia.
1-9
$9.90
9.50
10+
$8.90
8.95
METER MOVEMENT
MULTIFUNCTION
EDUCATION METER SERIES
• DC Voltage Range:
0-100mv – 1v – 10v – 50v
• DC Current Range:
0-100μA – 100mA – 1A – 5A
• Sensitivity: DC 10KΩ/V
• ACCURACY:
DC Voltage: ±2.5% of full scale
DC Current: ±2.5% of full scale
• Weight: 0.8 lbs.
Part No.
01KAL41
Part No.
01MAMO-50U
01MAMO-100U
01MAMO-1
01MAMO-50
01MAMO-100
01MAMO-500
01MAMO-1000
01MAMO-5000
01MAMO-10000
01DVMO-10
01DVMO-15
01DVMO-30
01DVMO-100
01AVMO-150
01AVMO-300
Description
0-50µA DC Amp Meter
0-100µA DC Amp Meter
0-1mA DC Amp Meter
0-50mA DC Amp Meter
0-100mA DC Amp Meter
0-500mA DC Amp
0-1A DC Amp Meter
0-5A DC Amp Meter
0-10A DC Amp Meter
0-10V DC Volt Meter
0-15V DC Volt
0-30V DC Volt Meter
0-100V DC Volt Meter
0-150V AC Volt Meter
0-300V AC Volt Meter
1-9
$10.95
10.95
10.95
10.95
10.95
10.95
10.95
10.95
10.95
10.25
10.25
10.25
10.25
10.25
10.25
10+
$9.95
$9.95
9.95
9.95
9.95
9.95
9.95
9.95
9.95
9.25
9.25
9.25
9.25
9.25
9.25
METER MOVEMENTS
EDUCATION METER SERIES
AMMETER; VOLTMETER
Price
$13.75
Accuracy: ±5% full scale
Part No.
PORTABLE INSTRUMENTS
• Ideal for schools, labs and other basic
monitoring needs.
• Wide, clear view plastic 3 1/2".
• AC iron vane types are true RMS
»» 2% accuracy on DC and AC iron vane
type
»» 3% accuracy on AC rectifier type and
ohms
»» 3% accuracy on temperature.
• AC iron vane type and ohm meter type movements are fuse
protected.
• Durable molded plastic case.
Part No
DescriptionPrice
01TR3500
01TR3501
01TR3541
01TR3543
0-1-5-25 Volts DC
0-25-100-500 Volts DC
0-5-25 V AC, Iron Vane Type
0-150 V AC, Iron Vane Type
$104.00
104.00
133.00
125.00
Description
01SM1105 01SMAC15 01SM1106 01SM1107A 01SM1107B Voltmeter –1 to +3V or
–5 to +15V
Voltmeter AC; 0 to 3 or
0 to 15V
Ammeter DC, 0-200µA
Ammeter DC; 0–100mA
Ammeter DC, 0–500mA
1-9
10+
$9.95
$8.95
9.95
8.95
9.95
9.95
9.95
8.95
8.95
8.95
METER MOVEMENT
AMMETER DC
• Range: 0-50µA
• Resolution: 1µA
• Dimension: 80 x 80 x 45mm
• Weight: 0.154 lbs.
Part No.
01DK80
1-9
$8.25
10+
$7.50
Call Toll Free: 1 (800) 972-2225 • In NJ: (732) 381-8020 • Fax:
(732) 381-1006
(732) 381-1572
21
LCR / TWEEZER TESTERS
LCR METER
•
•
•
•
•
•
•
Measures inductance, capacitance and resistance
Handheld with low power consumption
5 digits display
Test Parameters: L/Q, C/D, R/Q, Z/Q
Test Frequencies: 100Hz, 120Hz, 1KHz
Test Level: 0.3Vrms
Range:
L–1µH to 9999H @ 100/120Hz
L – .1µH to 999.9H @ 1KHz
C – 1p to 9999µf @ 100/120Hz
– .1p to 999.9µf @ 1KHz
• Power Supply: 9V battery or 12V adapter
• Weight: 1 lb.
Part No. 01LCR2821 • Price $275.00
IntelliTweeze® RECHARGEABLE
SMD TESTER
RECHARGEABLE R-C-L TweezerMeter™
IntelliTweeze™ is an R-L-C meter in a tweezer
for measuring surface mount chip caps, chip
resistors and inductors. An exciting answer to the
old problem of identifying, testing and troubleshooting SMD components.
• Measures Resistance, Capacitance, and Inductance
• Measures Continuity
• Measures Diode Polarity
The new updated 2012 model of the IntelliTweeze® is
available now.
FEATURES:
• Improved LiPO battery
• USB/Wall adaptor (included)
• Carrying case.
• 1 year warranty.
• Made in Canada.
SPECIFICATIONS
• Resistance Range: 0.05 to 9.9 M Ohm Precision: up to 0.2%
• Capacitance Range: 0.5 pF to 4999 mF Precision: up to 0.2%
• Inductance Range: 0.5 uH to 999 mH Precision: up to 0.5%
• Quality factor Q Range: 0.001 to 1000
• Dissipation factor D Range: 0.001 to 1000
Part No. 01TM500 • Price: $395.00
SMD TESTER FOR
RESISTORS & CAPACITORS
Model MS8910
This digital tweezer/tester makes it
easy to test tiny surface mount resistors and capacitors. Precise tips made
of non-magnetic steel are able to pick
and test even the smallest SMD components. It can also test regular components where leads may be too short to
insert into test terminals.
•
•
•
•
•
Auto power off
Low battery indicator
Built-in high-precision R/C probe
Ideal for Surface Mount Devices
Weight: 5.0 oz.
Part No.
01DMMS8910
Description
Digital Tweezer Tester for
resistance and capacitance
Price
$29.95
TWEEZER COMPONENT
TESTER
MODEL RC100
• One hand operation for fast, precise
measurement
• 4000 count LCD
• Measures resistance, capacitance, and
diode test
• Relative mode for zero or user supplied
reference
• Overrange and low battery indicators
• Auto Power off
Part No. 01EXRC100 • Price: $69.95
IN-CIRCUIT
ESR & DCR CAPACITOR TESTER
MODEL 881
DIGITAL
AUTOMOTIVE TESTER
The 881 is a portable In-Circuit ESR
meter that measures the equivalent
series resistance of electrolytic caps
in or out of circuit. It also measures
low value non-inductive resistors.
MODEL DM-9030
FEATURES:
• ESR from 0.1 ~ 30 ohm
• Tricolor chart shows ESR
readings of Good, Fair, and Bad
• DCR from 0.1 to 30 ohm
• 15 mVp-p output test voltage (will
not turn on any solid state devices)
• Comes complete with one-handed tweezer test probe
WITH INDUCTIVE PROBE
• Has all features of
a regular Digital
Multimeter
• DC V, AC V, Ohms,
Freq., Temp., Diode
DCA, ACA, Beeper
• Can measure RPM, DWELL
• Inductive pick-up sensor
included
•10MΩ impedance, 18mm LCD
• Size: 185mm x 87mm x 39mm
Part No. 01DM9030 • Price: $85.95
22
Part No. Description
01BK881 Model 881 In-Circuit Cap Analyzer
ELECTRONIX EXPRESS / RSR • 900 Hart Street, Rahway, NJ 07065
Price
$210.00
CAP / LCR METER
LCR METER
•
•
•
•
•
•
•
Measures inductance, capacitance and resistance
Handheld with low power consumption
5 digits display
Test Parameters: L/Q, C/D, R/Q, Z/Q
Test Frequencies: 100Hz, 120Hz, 1KHz
Test Level: 0.3Vrms
Range:
L–1µH to 9999H @ 100/120Hz
L – .1µH to 999.9H @ 1KHz
C – 1p to 9999µf @ 100/120Hz
– .1p to 999.9µf @ 1KHz
• Power Supply: 9V battery or 12V adapter
• Weight: 1 lb.
CAPACITANCE METER
MODEL MY6013
•
•
•
•
•
3 1/2 digit LCD display.
Nine ranges from 200pf to 20,000µF.
External zero adjustment knob.
Size: 3.6" x 7.4" x 1.3"
Weight: 8 oz.
Part No. 01MY6013 • Price: $37.95
MODEL 875B
LCR METER
Part No. 01LCR2821 • Price $275.00
• Measures capacitance – 0.1pf to 20,000µF with
1% accuracy up to 200µF and 2% after that
• Measures inductance – 0.1h to 200H; accuracy 2%
• Measures dissipation factor of caps and “Q”
of inductor
• Measures resistance – 1 milli Ω to 20MΩ
• 3 1/2 digit LCD
• Low battery and overload indicator
Part No.
01CT875B
01TL8
Price
$225.00
26.00
Opt. SMD
Probe
LCR METER WITH
PC INTERFACE
Measures inductance, capacitance
and resistance with secondary
parameters (Q, D, R).
TL-08
LCR BRIDGE
DUAL DISPLAY HAND-HELD
4 ½ DIGIT DISPLAY WITH AUTO
RANGING AND USB INTERFACE
• Measures capacitance, resistance and inductance.
• In circuit mode (Model 879B only)
• Components can be measured with selectable
test frequencies in series or parallel mode.
• Measures dissipation factor of capacitors “D”
and “Q” of inductors.
• Remembers minimum and maximum values.
• Excellent for sorting parts in engineering, QC or production.
Keeps running average of tested components.
• Selectable test frequencies 100Hz, 120Hz, 1KHz, 10KHz,
(120Hz and 10KHz Model 878B)
• Relative mode
• Backlight (Model 879B)
• Accessories: Alligator clip leads, 9V battery, USB cable
• AC Adaptor included (879B Only)
• Capacitance: Up to 20mF
• Resistance: Up to 10M Ohm
• Inductance: Up to 1000H
• Dimensions: 7.2" (L), 3.4" (W), 1.6" (H)
Weight: 10.725 lbs.
Description
Model 878B
Model 879B
Set Hi/Lo limits using absolute value or % limits
Parallel or series equivalent circuit
Mix/Max/Avg recording
Open and short zero removes unwanted stray impedances
Built-in RS-232 with Windows software
Complete with test leads, alligator clips, 9V battery and
holster and cable
Part No.
01EX380193
Models 878B / 879B
Part No.
01BK878
01BK879
•
•
•
•
•
•
Price
$249.00
299.00
Description
380193 LCR Unit
Price
$219.99
LCR METER
MODEL: 880
The 880 is a 40,000 count dual display handheld
LCR meter. It offers capabilities typically
only found in bench LCR meters such as
basic measurement accuracy up to 0.1%,
selectable test frequencies up to 100
kHz, selectable test signal levels and a
4-terminal socket configuration. When
using the included four-terminal Kelvin
test leads, this configuration can reduce
the effect of lead impedances and contact
resistance thus minimizing measurement errors and
improving accuracy especially in the lower impedance range.
Users will also benefit from the Auto detect function; with a
push of a single button, the unit automatically identifies primary
parameters L, C or R and related secondary parameters, and
sets the suitable series/parallel equivalent mode and range. A
mini USB interface allows users to transfer data to a PC using
either the provided data logging software or SCPI commands
sent from a custom program.
Part No. 01BK880 • Price: $379
Call Toll Free: 1 (800) 972-2225 • In NJ: (732) 381-8020 • Fax:
(732) 381-1006
(732) 381-1572
23
LCR METERS
CAPACITANCE METER KIT
CAP METER
PROGRAMMABLE – MODEL 890B
You will have your own capacitance meter
after successful completion of this project.
•
•
•
•
•
•
•
•
Range: 1pf – 500µF
About 1% accuracy
Automatic range switch
Zeroing available
Real time serial output of measurement read-outs with time stamp
Low cost and easy to build
8 to 16V DC power supply required (but not included))
Size: 3" x 2.3" x 0.6"; Wt: 1.5 oz.
Part No.
32JYE06001
32JYE06002
16D9500MA
Description
Cap. Kit
Cap. Meter Assembled
9V DC Adapter
Price
$13.95
15.95
4.75
LCR METER
MODEL LCR-6002
•
•
•
•
•
•
•
•
•
•
•
•
•
3.5” color LCD
10Hz~2kHz
Test frequency
Basic accuracy : 0.05%
Measuring speed up to 25ms
(max.)
Full frequency range or spot OPEN/SHORT
16 major/secondary parameter measurement combinations and two
additional monitoring parameters(maximum four different parameters
can be shown simultaneously)
DCR measurement and internal D.C. bias voltage (±2.5V)
PASS/FAIL judgment
Auto Level Control (ALC) function
BIN function provides 9BIN and 1AUX, totally 10 BIN
10 steps listed tests to select different frequency, voltage and current
criteria
Standard interface : RS-232C, Handler and USB storage
Part No. 01LCR6002 • Price: $890.00
LCR / ESR METER
SMD Probe
Included
IN-CIRCUIT; SYNTHESIZED
MODEL 885
This meter is the first handheld meter of this
type on the market, with a wide range of test
frequencies up to 10KHz and many measurement parameters including Z, L, C, DCR, ESR,
D, Q and ∅ as well. The 885 is designed for
both component evaluation on the production
line and fundamental impedance testing for bench-top applications.
With a built-in direct test fixture, you can test the lead components very
easily. The optional 4-wire test clip can give a convenient connection to
larger components and assemblies with the accuracy of 4-wire testing.
FEATURES:
• Measurement parameters: Z,
L, C, DCR, ESR, D,Q, and Ø
• Test conditions: 100Hz,
120Hz, 1KHz, 10KHz, 1Vrms,
0.25Vrms, 0.05Vrms
• 0.5% basic accuracy
• Dual LCD display
• SMD surface mount tweezer
probe included
SOFTWARE FEATURES:
• Go-No Go testing (component
sorting)
Part No.
01BK885
01BKTL08C
24
• Very quick response, user
friendly
• Fully auto/manual selection
• DC resistance measurement
• Rechargeable battery / AC
powered
• Infrared RS-232 interface
capability
• Remote bin (component grading)
• Remote operation
Description
LCR/ESR Meter
Test Clip - 4 Wire
Price
$595.00
83.00
The Model 890B Capacitance Meter features a large 4 1/2 LCD with
dual display, 11,000 counts resolution, and 9 automatically selected
ranges with full scale value from 1.0pF to 50mF. Designed to meet the
latest international safety standards, the meter’s dedicated chip and
microprocessor allow programmable high/low limits or pre-programmed
standard capacitor tolerances, making it ideal for measuring values,
inspection, sorting capacitors and testing capacitors against standard tolerances.
Optional software and cabling is available for PC based data logging and monitoring.
• Dual display simultaneously displays value and deviation from selected tolerance
• Sort on preset tolerance of 1, 5, 10%
Part No.
01CT890
• Program unique values to sort
for specific circuit applications
• USB PC interface for data logging software available
Description
Capacitance Sorting Meter
METER –
Price
$135.00
CAPACITANCE
MODEL 810C
• 3 1/2 digit LCD display
• Nine ranges from 200
pF to 20,000µF
• 0.1 pF resolution
• Low battery and overrange indicator
Part No. 01CT810 • Price: $85.00
CAPACITANCE METER
AUTO RANGING, PROGRAMMABLE– MODEL 830B
The Model 830B Capacitance Meter features a large 4 1/2 LCD with dual display,
11,000 counts resolution, and 9 automatically selected ranges with full scale value
from 1.0pF to 199.99mF. Designed to meet the latest international safety standards,
the meter’s dedicated chip and microprocessor allow programmable high/low limits or
pre-programmed standard capacitor tolerances, making it ideal for measuring values,
inspection, sorting capacitors and testing capacitors against standard tolerances.
Optional software and cabling is available for PC based data logging and monitoring
• Auto ranging
• Dual display simultaneously displays value and deviation
from selected tolerance
• Sort on preset tolerance of 1, 5, 10%
• Program unique values to sort for specific circuit applications
• USB PC interface for data logging software available
Part No.
01CT830
Description
Auto Ranging Cap Meter
Price
$289.00
HIGH PRECISION LCR METERS
MODEL LCR 819 & MODEL LCR821
• Measures capacitance, resistance and inductance.
• 12Hz to 100KHz, 503 continuously variable
frequencies.
• .05% high measurement accuracy.
• 100 sets memory for save/recall of setup state.
• R/Q, C/D, C/R, L/Q test modes.
• Absolute Value, ∆ Value, and ∆% measurement display.
• 240 x 128 dot matrix LCD display.
• Test condition and test result shown on screen simultaneously.
• Kelvin probe set included (LCR06).
• MODEL LCR 821: Features a 200kHz frequency ramp, additional
test modes plus RS232 and software included.
Part No.
01LCR819
01LCR821
01LCR05
01LCR08
Description
LCR Meter Model LCR 819
LCR Meter Model LCR 821
Test Fixture For Radial Leads
Test Fixture for SMD Components
ELECTRONIX EXPRESS / RSR • 900 Hart Street, Rahway, NJ 07065
Price
$1,655.00
2,295.00
189.00
235.00
CLAMP METERS
AC/DC DIGITAL CLAMP METER
MODEL MS2138
•
•
•
•
•
Double insulation (600V CATIII rating)
AC and DCV: Four ranges to 600V
AC and DC Current: Two ranges to 600A
Resistance: To 40M in six ranges
Frequency: 100KHz from test terminal,
400Hz from current clamp
• Back-lit 3999 count display with
42 segment bar graph
• Standard Features: Auto/manual ranging, auto
zero key for DCA, data hold, min/max, jaw lighting,
auto power off, continuity and diode tests
• AC voltage
• Resistance
• Peak Hold,
Hold
•1 3/4" clamp
40 METERS / 131 FEET RANGE
• Measures AC current up to 1,000 amps
• AC/DC voltage, AC current, resistance,
frequency, capacitance, continuity, duty cycle
& diode check
• Built-in flashlight for AC current measurement
• Data hold + relative value measurement
to 750V
to 2KΩ
Data
Part No. 01UT205 • Price: $39.95
CLAMP METERS
opening
Part No. 01CM367 • Price: $225.00
CLAMP METERS
MODELS 312B, 313A – MINI AC CLAMP METERS
MODEL 316 – MILLI-AMP AC/DC CLAMP METER
These models offer, in
addition to current reading,
the ability to measure
voltage and resistance.
Practical where a traditional
sized meter may be to
cumbersome to use.
Features include, overload
protection, low battery
indicator, 0.98" clamp
opening size, continuity test,
2 times/sec. sample rate,
auto ranging, data hold.
Model 316 also features a 4
digit display, and auto-off.
RATINGS
AC Current
DC Current
AC Voltage
DC Voltage
Resistance
Part No.
01CM312
01CM313
01CM316
• Compact size AC clamp meter, up to 600 amps.
• Powered by RioRand Advanced Technology
• AC/DC voltage, resistance, continuity, and diode
check
• Dara hold + Maximum value measurement
• Carrying case included
CLAMP METER
CLAMP METER
• DC & AC current
to 2000A (2 ranges)
• DC voltage to
200V
40 METERS / 131 FEET RANGE
Part No. 01UT202A • Price: $19.75
Part No. 01MS2138 • Price: $62.95
MODEL 367A
CLAMP METER
MODELS MA200, MA220
• Compact size
• Auto power off
• One touch “Auto Zero”
(MA220)
• Temperature, frequency and
capacitance (MA220)
• 2,000 count (MA200), 4,000
count (MA220)
• AC/DC Volts: 600V
• AC Current: 400A
• DC Current: 400A (MA220)
Part No.
01MA200
01MA220
MA200
Description
400A AC Clamp
400A AC/DC Clamp
MA220
Price
$54.94
109.99
CLAMP METERS
312B
313A
• True RMS (EX830)
• Frequency, temperature, capacitance
• AC Current: 1,000A (EX810, EX830);
800A (EX710)
• DC Current: 1,000A (EX830)
• AC/DC Volts: 600V
• Temperature (IR): –58° to 518° F
(EX830)
Price
$85.00
159.00
169.00
Part No.
313A312B 316
600A
200/600A
100A
600A
100A
600V
200/600V
600V
600V—
600V
1K
200 Ohm
10K
Description
BK Model 312B mini clamp meter
BK Model 313A mini clamp meter
BK Model 316 milli-amp clamp meter
MODELS EX710, EX810, EX830
316
01EX710
01EX810
01EX830
Description
EX810, EX830
Price
EX710
800A, Clamp
$89.99
1,000A, Clamp
149.99
1,000A, True RMS Clamp 219.99
Call Toll Free: 1 (800) 972-2225 • In NJ: (732) 381-8020 • Fax:
(732) 381-1006
(732) 381-1572
25
CLAMP METERS
CLAMP METERS
NON CONTACT VOLTAGE
& CURRENT DETECTORS
MODELS: 373; 374; 375;376
Work horse clamps with increased
perfmance and flexiblility
• True RMS current and
voltage (All models)
• AC/DC Volts: 600
• AC Current: 600A;
1000A (376 only)
• Resistance: 6K Ohm (373,
374); 60K Ohm (375 &
376)
• Auto shut-off, display hold
• Frequency: 500HZ (375,
376)
• Capacitance 1-1000uF
• Flex Probe: 18"; flex probe
can measure up to 2500A
(Model 376)
• Soft carry case
• Warranty: three years
Part No.
01FL373
01FL374
01FL375
01FL376
Description
Clamp Meter
Clamp Meter
Clamp Meter
Clamp Meter
MODEL 40130
Non-contact AC voltage from 100 VAC to 600 VAC.
Flashing LED & push button ON/OFF beeper.
MODEL DV30
373
374
Non contact AC Voltage Detector (12V to 600V AC). Sensitivity
adjustment available
MODEL DVA30
Non contact AC Voltage and Current Detector. AC voltage (12V to
600V), AC current (200mA to 1000A). Sensitivity adjustment available.
Part No.
01EX40130
01DV30
01DVA30
375
Model
40130
DV30
DVA30
Price
$11.99
14.95
44.99
376
373
374
375
376 with iFlex™
Price
$202.95
269.95
349.00
359.95
RECEPTACLE TESTER GFCI
PLUG BUG
• For use on 110-125 VAC receptacles
• Detects common wiring problems in standard
and (GFCI) ground fault circuit interrupter
outlets
• To test, simply plug into receptacle, push the
TEST button and observe the light pattern
• One Year Limited Warranty
AC LINE SPLITTER
Part No. 29TR9610 • Price: $8.90
MODEL ELS2
EMF TESTER
• Measures load current without splitting line cord
• X1 and X10 measurement points
• Built-in voltage measurement jack
ELECTROMAGNETIC
FIELD TESTER
• Range: 20/200/2,000 micro Tesla
200/2,000/20,000 milli-Gauss
• Separate Probe
• Size: 163 x 70 x 33 mm
Part No. 01ELS2 • Price: $18.90
Part No. 01EMF827 • Price: $99.00
3 3/4 DIGIT AC CLAMP METERS
AUTORANGING, TRUE RMS
MODELS AC65, AC68
• AC Current (400A/600A)
• DC Voltage: 600V (AC68)
• AC Voltage: 600V
• Resistance: 40K
• Frequency: 20KHz (AC68)
• Counts: 4,000
Part No.
Descr.
01CMAC68 AC68
26
Price
175.00
AC65
AC68
INSULATION TESTERS
These are intended primarily for
periodic testing of industrial motors,
transformers, electrical wiring and cable
insulation for signs of deterioration.
Useful for testing of TV sets and
appliances to assure no hazardous
leakage current.
Model 307A
Model 308A
• Selectable 250V, 500V or
• Push to test
1,000V insulation test
• Model 308 offers higher accuracy
• Low resistance test
and digital display
• Extra rugged integral
carrying case
Part No.
01BK307
01BK308
Description
Analog
Digital
Price
$205.00
279.00
ELECTRONIX EXPRESS / RSR • 900 Hart Street, Rahway, NJ 07065
SPECIALTY METERS
TACHOMETER
PHOTO/CONTACT
LASER DISTANCE METER
40 METERS / 131 FEET RANGE
MODEL DT2236
• Photo tach. 5 to 100,000 RPM
• Contact tach. 0.5 to 19,999 RPM Includes both
a photo and contact tachometer into one
precision instrument. Comes complete with
accessories, reflective tape and carrying case.
• Can measure surface speed
Part No.
01DT2236
Price
$155.00
DIGITAL STROBOSCOPE
•
•
•
•
MODEL LX - 101
Part No. 01DT2239A • Price $211.00
DIGITAL STROBOSCOPE
W/ RS232 INTERFACE
•Range: 20 to 10,500 RPM/flash per min
• RPM setting by push button
• External trigger signal input for simultaneous test of measurement
• RS232 computer interface
Part No. 01DT2269 • Price: $235.00
DIGITAL ANEMOMETER
• Measures wind speed in m/s, km/hr, ft/
min. and knots & temperature
• Twisted vane arms sensor
• Data hold
• Accuracy: 2% + 1 digit
• Sensor head: 2.8" dia.
Equipped with conventional twisted vane arms
sensor, it is sensitive to low wind speed and
can measure as high as 90 miles/hr. It is
used in wind tunnel, heating/air conditioning,
and automotive applications.
Complete with sensor probe and manual.
Price
$65.95
LIGHT METER
• 2,000/20,000/100,000 Lux
• Data hold
• Tungsten, fluorescent, mercury
sodium — 7 light type select
• Microprocessor circuit
• Size: 185 x 78 x 38 mm
WITH RS232 INTERFACE
PH METER
Description
PH Meter
Electrode, General Cost Effective
Electrode, Laboratory,
High Quality and Field Usage
Part No.
01LX101
HUMIDITY/TEMPERATURE METER
0 to 14 pH x .01 pH
Max, min., memory recall button
µ-P circuit with LCD display
pH, mV, temp., manual temp adj.
PH electrodes (optional)
Part No.
01PH207HA
01PE03
01PE01
• 0-50,000 Lux in 3 ranges
• Accuracy 5% + 2 digits
• Size: 4.3" x 2.9" x 0.9"
• Spectrum meets C.I.E. photopic
• Equipped with precision selenium
photo-voltaic cell. Ideal for
photographers and lighting industry.
Complete with light sensor, carrying
case and manual
Part No. 01LX107HA • Price: $80.00
Part No. 01AM4202 • Price: $145.00
•
•
•
•
•
Part No. 01UT390B • Price: $29.95
LIGHT METER
100–10,000 RPM/flash per min.
Accuracy: ± (.05% +1d)
Xenon flash tube, 8mm red LED
Size: 210 x 120 x 120 mm
W/TEMP.
• Supports unit selection of meter, inch and
feet, Indirect measurement by Pythagorean
Theorem
• High accuracy Measurement for
distance,area,Volume Wide measuring range
• Supports data hold and data clear function,
Supports data store/recall function of up to
30 measure
• Large LCD with backlight and multi-line
display, Function of self calibration
Price
$95.00
26.00
50.00
MODEL MS6503
• Simultaneous display both RH and temp
• Adjustable interval data logging
• Humidity: Range 0 ~ 100%, 0.1% resolution, ±2.5%
accuracy
• Temperature: Range –20°C ~ 60°C,
–4°F ~ 140°F, resolution 0.1°C, 0.1°F, accuracy
±0.7°C, ±1.4°F
• 4 digit LCD with backlight, min/max, data hold, timer,
auto off, compact size and weight
• Response Time:
Humidity – 75 sec. in slowly moving air
Temp – 40 sec in slowly moving air
• Unit comes complete with manual, battery, case,
software, cable, probe
Part No. 01HT6503 • Price: $169.00
Call Toll Free: 1 (800) 972-2225 • In NJ: (732) 381-8020 • Fax:
(732) 381-1006
(732) 381-1572
27
SPECIALTY METERS
INFRARED THERMOMETER
• Non Contact Range:
–4°F to –986°F
(–20°C to 539°C)
• Laser Power:
Less than 1mW
• Accuracy: 1%±1°C
• D:S: 12:1
• Automatic Turn
Off: 10 seconds
• Size / Wt.:
162x56x190mm;
0.6 lbs.
Part No. 01MS6530 • Price: $85.00
SOUND LEVEL METER
• Range: Lo - 35db to 90db,
Hi - 75dB to 130dB
• Accuracy: ±1.5dB (ref 94dB @ 1KHz)
• Standard: IEC 651 Type 2
• Frequency Range: 32Hz to 8000Hz
• Slow and fast time weighing characteristics
• Operating Temperature: –10°C to 50°C, <90% R.H.
• Battery: 4 x AAA
• Dimensions: 215mm(H) x 44mm(W) x 40mm(D).
• Weight: 170g
Part No. 01SL650 • Price: $85.00
DIGITAL SOUND LEVEL METER
• 30-130 db in 3 ranges
• Max hold; 0.7 db accuracy
• 0.1 db resolution
• Size: 8" x 3.2" x 1.4";
• 94.0 db calibration built-in
wt. 10 oz.
It uses condenser microphone for high accuracy and
stability. An extra analog output signal can be used for
control, data-analysis and recording. Widely used in audio
system testing, heating and air-conditioning, work place
sound level testing, and highway environmental impact.
Part No. 01SL4001 • Price: $169.95
SOUND LEVEL METER – TYPE 1
• Frequency and time
weighting meet IEC651
type 1
• 30 to 130db, 3 ranges
•
•
•
•
Max. hold, data hold
AC out
Internal 94db calbration
Size: 260 x 87 x 36 mm
Part No. 01SL4022 • Price $235.00
FORCE GAUGE
MODEL FG-20KG
• 20Kg, Kg / LB / Newton
• Tension and compression,
peak hold, zero, positive /
reverse display
• 5 digit LCD
• Full line accessories
Part No. 01FG20KG • Price: $260.00
28
DIGITAL THERMOMETER
MODEL TM902C
• Temperature Range: –40°C to
250°C with wire temperature probe.
• Temperature Range: –40° to
750°C with immersable temperature
probe
• Dimensions / Weight:
2.8" x 1.0" x 4.3" / 5 oz.
Part No.
01TM902C
Description
Price
Digital Thermometer
$15.95
W/Wire Temperature Probe
01TM902C-TP Immersable Probe
4.95
01TM902IP
Spare Wire Temperature Probe 2.95
INFRARED THERMOMETER
WITH LASER GUIDE
Economical cost, professional quality.
• Non contact temperature range: 14° F
to 662° F (–10° C to 350° C).
• Resolution 1° F or 1° C accuracy 3%.
• Built-in laser guide: red less than 1mW.
• F and C selectable.
• 0.95 emissivity provides high accuracy
for most surfaces.
• Distance to measuring spot ratio – 8:1
• Easy readout LCD display.
• Records maximum, minimum and relative readings.
• Optional 9V battery (not included)
Part No. 01TM919L • Price: $95.00
MINI INFRARED THERMOMETER
NON-CONTACT
MODELS IR100, IR201
• Surface Temperature:
–31° to 446°F (IR100);
–58° to 518°F (IR201)
• Maximum Resolution:
0.1° (IR100); 1.0° (IR201)
• Field of View: 1:1 (IR100); 6:1 (IR201)
•Accuracy: ±4°F (2°C)
Part No.
01IR100
01IR201
IR100
IR201
Description
Price
Mini Thermometer
$36.95
Pocket Thermometer 56.95
TEMPERATURE
PROBES – TYPE K
Part No.
01TP01
01TP02A
01TP03
Description
–40° to 250°C, Naked-bead
–50° to 900°C,
3.2mm dia. x 10cm
–50° to 1,200°C, 8mm dia. x 10cm
Price
$5.95
26.95
39.95
TP01 TP02A TP03
ELECTRONIX EXPRESS / RSR • 900 Hart Street, Rahway, NJ 07065
SPECIALTY METERS
LCD PANEL METER
ENERGY CONSUMPTION METER
KILL A WATT™
This allows you to measure energy consumption of
appliances. Simply connect these appliances to the Kill
A Watt™, and it will assess how efficient they really
are. Large LCD display will count consumption by
the Killowatt-hour, same as your local utility. You can
calculate your electrical expenses by the day, week,
month, even an entire year. Also check the quality of
your power by monitoring Voltage, Line Frequency, and
Power Factor.
• Large LCD display
• Cumulative Killowatt-Hour Monitor
• Forecast Your Costs
• Also display Volts, Amps, Watts, Hz, VA
• 0.2% Accuracy
Part No. 01P4400 • Price: $28.95
ENVIRO METER 6-IN-1
MODEL # 9055
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Full function, Auto / Manual Ranging DMM
Light Meter from 0 to 40,000 Lux
Sound Meter from 35.0 to 100 dbc
Relative Humidity Meter
Temperature Ranges (°F & °C)
Capacitance Ranges from 50nF to 100µF
Visual AC Voltage Detector
Overload Protection - Fused mA and Amp ranges
Includes: Safety Test Leads, Thermocouple Probe,
and 9 Volt Battery
•
Voltage Ranges: AC to 700V, DC to 1000V
•
AC/DC Current Ranges to 10 Amps
•
Resistance from 400 Ohms to 40M Ohms
•
Frequency Ranges form 5Hz to 10MHz
•
uA/mA from 400uA to 400mA AC/DC
•
Part No. 01TR9055 • Price: $175.00
Part No.
01ACMS-48M
1-9
$3.95
• Dual slope A/D conversion
• Accuracy: ±.5%
• Sampling Time: 2.5 sec.
• Supply Voltage: 8 – 12V DC
• Size: 68mm x 44mm
• Input Impedance: 100MΩ @ 200mv
10MΩ @ 20mv
10MΩ @ 200v
Part No.
01PMLCD1
01PMLCD3
01PMLCD5
MODEL
MODEL
MODEL
MODEL
CAT IV 600V Rated
Diode Test
Continuity Beeper
REL Mode
Data Hold
Auto Power Off
10+
$2.95
VOLTAGE LED
PANEL METER
• Blue 4.5V-30V
• 3 Digit; 1% accuracy
• Best suited for battery level display
10+
$7.50
7.50
10.95
LCD PANEL METERS
• LCD display, 18mm digit
height
• 9V battery operation
• On/off switch
• Automatic zero adjust
PURE WATER TESTER
• CATII 600V rating
• Approx. 0.4 sec.
sampling
• Instruction Manual
Model DV101 DC Volts
Model DA103 DC Amps
Model AV102 AC Volts
Measure AC Volts
Range; 2V/20V/200V/600V
Model AA104 AC Amps
Measure AC Amps
Range: 2mA/20mA/200mA/5A
•
•
•
Range/Resolution:
200mV x 0.1mV
2V x 0.001V
20V x 0.01V
200V x 0.1V
Accuracy: 200mv range
± (0.5% + 1 digit) reading
2V, 20V, 200V ranges
±(0.8% + 1 digit) reading
10M input impedance
Part No.
01DV101
01DA103
01ACV102
01ACA104
Part No.01DFR0130 • Price $8.75
Part No. 01WA300 • Price: $89.00
1-9
$7.95
7.95
11.95
DV-101 – DC VOLTS
DA-103 – DC AMPS
AV-102 – AC VOLTS
AA-104 – AC AMPS
All Units Feature:
• Discern from DC volt
• Selftest for safety purposes
Displays water purity by measuring its
conductivity. Using this meter you can quickly
evaluate the effectiveness of water filters,
purity of water used for industrial process,
or just for drinking. Does not detect toxic
particles.
Display: 31/2 LCD
Measurements:
0-1999µS (micro Siemens)
Description
0–200mv
0–200v
0–200v with Backlight
Easy operation, professional quality, compact.
Applications include education, industrial, QC and R&D,
Lab.
AC VOLTAGE TESTER
• Non-contact test of voltage
• Sensitivity adjustable
• TV and Monitor Radiation Test
3 1/2 DIGIT; 0.6"
•
•
•
•
•
•
•
Range/Resolution
2mA x 0.001mA
20mA x 0.01mA
200mA x 0.1mA
5A x 0.01A
Accuracy: 2mA, 20mA, 200mA
ranges ± (1% + 1 digit) reading
5 amp range, (1.5% + 1 digit)
Overload protection
Description
DC Volt Meter
DC Amp Meter
AC Volt Meter
AC Amp Meter
1-9
$42.50
42.50
43.00
43.00
10+
$39.50
39.50
40.00
40.00
LED PANEL METERS
Red LED display, 5VDC operation
Large, 0.56 inch character height
Adjustable decimal point
100M input impedance, 2/5 sec
sampling time
• Dimensions: 44mm
H x 68mm W
Part No.
01DM3A
01DM3B
01DM3C
Description
0-200mV
0-20V
0-200V
Call Toll Free: 1 (800) 972-2225 • In NJ: (732) 381-8020 •
1-9
10+
$10.95
$10.50
10.95
10.50
10.95
10.50
381-1006
Fax: (732)
29
(732) 381-1572
FUNCTION / SIGNAL GENERATORS
SIGNAL GENERATOR
10HZ – 1MHZ
• Frequency Range:
10Hz – 1MHz
• Accuracy: ±3% + 2Hz
• Wave Form: Sine / Square
• Output: Sine: 8Vrms; Sq: 10Vpp
• Attenuator: 0, -20db, -40db and fine adjuster
Part No.
01SG2601A
Price
$210.00
RF SIGNAL GENERATOR
FUNCTION GENERATOR
5 MHZ WITH DIGITAL DISPLAY
MODEL 4011A
MODEL 4012A (WITH SWEEP FUNCTION)
• Sine, square, triangle,
pulse & ramp output
• Coarse & fine tuning
• 4 digit LED display
Part No.
01FG4011
01FG4012
Description
Model 4011A
Model 4012A (Sweep Version)
Part No. 01SG4160 • Price: $189.95
SIGNAL GENERATOR/COUNTER
MODEL SG-4162AD
The SG-4162AD is a combined radio
frequency signal generator and frequency counter. The 6 character LED display
allows direct reading either generated
internally or from an external source.
The frequency generator has a range of
100KHz – 150MHz with sine waveform and adjustable output level. The
frequency counter has a range of 10Hz to 150MHz.
Part No.
01SG4162AD
MODEL 2005B
Price
$335.00
RF SIGNAL GENERATOR
• 100kHz to 150MHz on six bands
• Output to 450 MHz on harmonics
• AM modulation, Internal or External, 0%
to 100%
• Frequency monitor output for external
frequency counter
• Step and variable attenation to-40db
Part No. 01SG2005 • Price: $299.00
AUDIO GENERATOR
MODEL GAG810
•
•
•
•
•
Frequency Range: 10Hz ~ 1MHz
0.02% low sine wave distortion
6 step output attenuator
External sync function
Square wave output voltage 10V p-p or
more (no load)
• Complete with instruction manual, test
lead, power cord
Part No.
01GAG810
30
Price
$220.00
Price
$329.00
$352.00
SWEEP FUNCTION GENERATOR
MODEL SG4160
• 100kHz to 150MHz on six bands
• Output to 450 MHz on harmonics
• AM modulation, Internal or External, 0%
to 100%
• Frequency monitor output for external
frequency counter
• Step and variable attenation to -40db
• Variable duty cycle
• Variable DC offset
• Range: 0.2 Hz to 5
MHz in 7 ranges.
10 MHZ WITH DIGITAL DISPLAY – MODEL 4017A
• Linear & log sweep
• 5 digit LED display
• All features of BK Model 4011
Part No. 01FG4017 • Price: $390.00
FUNCTION/SWEEP
GENERATORS
4 MHZ – MODELS 4001A AND 4003A
4001A
• Generates 6 waveforms – sine, triangle, square, ramp, ± pulse.
• 0.5 ~ 4MHz frequency range.
• LIN/LOG sweep mode – width > 100:1
continuously variable.
• Internal/external counter function with 5 digit
autorange LED display (Model 4003A Only).
• 20Vp-p output into open circuit.
• TTL output, VCG input, 100% DC offset.
Part No.
01FGBK4003BK
01FGBK4001BK
MODEL 3001
Description
4003A With Display
4001A No Display
4003A
Price
$251.00
187.00
AUDIO GENERATOR
• 20 Hz to 150 kHz Sine/
Square Wave Audio Generator
• Sine and square wave
generator
• 20 Hz to 150 kHz in 46
steps
• Low distortion RC
oscillator
• Variable output control
• Compact, fully portable,
light weight
• Low battery indicator
Part No. 01BK3001 • Price: $85.00
FUNCTION GENERATOR
2 MHZ – MODEL 4010A
•
•
•
•
Sine, square, triangle, pulse & ramp output
Variable duty cycle
Variable DC offset
Range: 0.2 Hz to 2 MHz in 8 ranges
Part No. 01FG4010 • Price: $239.00
ELECTRONIX EXPRESS / RSR • 900 Hart Street, Rahway, NJ 07065
FUNCTION / SIGNAL GENERATORS
SWEEP
FUNCTION GENERATOR
GFG 8200 SERIES
FUNCTION GENERATOR
3 MHZ WITH INT/EXTERNAL COUNTER
MODELS: GFG-8215A, GFG-8216A,
GFG-8219A, GFG-8250A, GFG-8255A
• Frequency: 7 ranges 0.3Hz ~
3MHz (GFG-8216A, GFG-8219A)
• Frequency: 7 ranges 0.5Hz
~ 5MHz (GFG-8250A and
GFG‑8255A)
Model GFG-8250A
• Waveforms: sine, triangle, square,
ramp, TTL, CMOS
• External voltage controlled frequency (VCF) function
• Variable DC offset control
• Two-step (-20dB x 2) variable attenuator
• Built-in 6 digit counter with INT/EXT frequency counter
function up to 150MHz
MODELS GFG-8219A AND GFG-8255A are Sweep Function
Generators also featuring:
• LIN/LOG sweep mode
• INT/EXT AM/FM modulation
• GVC output for synchronization
Part No.
01GFG8215
01GFG8216
01GFG8219
Description
3MHz (No Digital Display)
3MHz with 6 Digit INT/EXT Counter
3MHz Sweep, Counter, AM/FM
Modulation
01GFG8250 5MHz with 6 Digit INT/EXT Counter
01GFG8255 5MHz Sweep, Counter, AM/FM
Modulation
Price
$175.00
235.00
310.00
265.00
379.00
MODEL FG-32
This model offers an outstanding price.
Numerous features include sweep mode, six
waveform functions and an external counter.
• Six waveform functions – sine,
triangle, square, ramp ± pulse.
• 0.5Hz ~ 3MHz frequency range.
• Internal/External counter function.
• 5 digit autorange counter display.
• Linear/Log sweep. Sweep rate
10mS ~ 5S.
• Amplitude 20V p-p/open, 10V
p-p/50 ohm load.
• External counter trigger level
control.
• VCF input 0 ~ ±10V control
frequency to 1000:1.
Part No. 01FG32 • Price: $195.00
3MHZ SWEEP
FUNCTION GENERATOR
MODEL FG-30
For applications where no display is needed, this model offers exceptional
value and versatility including sweep mode and six waveform functions.
• Six waveform functions:
sine, triangle, square,
ramp ± pulse.
• 0.5Hz ~ 3MHz frequency
range.
• Linear/Log sweep. Sweep rate
10mS~5S.
• Amplitude 20V p-p/open, 10V p-p/50
ohm load.
• –20 dB attenuator
Part No. 01FG30 • Price: $135.00
FUNCTION/ARB GENERATOR
5MHz/10MHz/25MHz/50MHz
Siglent Function/Arbitrary Waveform
Generator are designed to deliver
outstanding value and performance
some key applications include IC
test, simulate environment signals,
electrical circuit function test, and
education and training.
Features:
• Advanced DDS
technology,125MSa/s sampling
rate, 14bit vertical resolution
• 5 kinds of standard waveforms, built-in 46 kinds of arbitrary
waveforms (including DC)
• Complete modulation functions: AM, DSB-AM,FM, PM, FSK,
ASK, PWM, linear/logarithmic sweep and burst
• Innovative EasyPulse technology, can output pulse of low
jitter, quick rising/falling edge
• Standard interfaces: USB Device, USB Host, support U-Disk
storage and software update
• Provide 10 nonvolatile storage spaces for user’s arbitrary
waveforms
• Configurable with powerful arbitrary waveform editing
software EasyWave
Part No.
01SDG805
01SDG810
01SDG830
01SDG1010
01SDG1025
01SDG1050
Description
5MHz, Single Channel
10MHz, Single Channel
30MHz, Single Channel
10MHz, Dual Channel
25MHz, Dual Channel
50MHz, Dual Channel
Price
$248.00
$282.00
$332.00
$329.00
$409.00
$509.00
FUNCTION GENERATOR
SG-105 SIGNAL GENERATOR
A pocket-sized, low distortion sine-square wave generator, ideal for field
technicians, students and hobbyists. Operates with a standard 9V battery.
Frequency Range:
Output Voltage:
x 1-20Hz to1.5KHz
1.2 rms max. (no load)
x 100-2KHz to150 KHz
Maximum Distortion:
23 frequency steps
200 Hz to 15KHz -0.05% (THD)
Output Control:
50 Hz to 30 HKz -0.1% (THD)
0 db, -20 db and fine adjust
20Hz to 100HKz -0.5% (THD)
Output Impedence:
600 ohms +10%
Part No.
01SG105
1-9
$56.00
10+
$51.50
10 MHZ SIGNAL GENERATOR
SINE AND SQUARE WAVE – MODEL SG-10
Design based on DDS technology. Microprocessor
controlled for clean, accurate DC to 10MHz waveforms
with frequency accuracy of 0.02% and 0.1Hz frequency
resolution.
• Sine and Square waveforms
• Range: DC to 10 MHz, 0.1 Hz steps
• Crystal Accuracy: ±50ppm
• Sine Wave Output: 5Vpp no load, variable
amplitude control
• Square Wave Output: 5Vpp no load
• Compact Size: 3.8" x 5.7" x 1.5"
Part No. 01SG10 • Price: $98.00
Call Toll Free: 1 (800) 972-2225 • In NJ: (732) 381-8020 • Fax:
(732) 381-1006
(732) 381-1572
31
FUNCTION / SIGNAL GENERATORS
20MHZ FUNCTION/SWEEP
FUNCTION / ARBITRARY
PROGRAMMABLE GENERATOR
GENERATORS
DDS WITH ARBITRARY WAVEFORM
Full featured, menu driven direct digital synthesis (DDS) generator. Waveform changes can be made manually or via RS-232
interface.
• 20MHz range (sine only / square up to 5MHz)
• Internal AM, FM, PSK, FSK modulation
• Sweep range 0.1Hz to 20MHz
Part No. 01VZMFG2120 • Price: $395.00
FUNCTION GENERATOR, 20MHZ
• 0.2 Hz to 20 MHz
• Sine, Square, Triangle, Pulse, &
Ramp output
• Coarse and Fine tuning
• AM & FM modulation
• Burst operation
• External frequency counter to 30
MHz
• Linear and log sweep
• Variable duty cycle
• Variable DC offset
Part No. 01BK4040A • Price: $669.00
DUAL CHANNEL
ARBITRARY WAVEFORM GENERATORS
5 MHZ, 10 MHZ, 25 MHZ, AND 50 MHZ MODELS
• DUAL-CHANNEL Arbitrary waveform functions
• Four different bandwidth models
• Fully independent dual channel operation
• 14-bit, 125Msa/s, 16K point arb waveform generators
• Large, 3.5 inch color display with waveform preview
• USB device and host ports
• Optional GPIB interface and dedicated waveform keys
• Stable & precise sine, square, triangle and puls forms
• Numeric keypad, rotary control knob
• Complete with USB cable and instructional CD
Part No.
Description
Price
01BK4052
5 MHZ Dual Channel Arb Generator
$499.00
01BK4053
10 MHZ Dual Channel Arb Generator
599.00
01BK4054
25 MHZ Dual Channel Arb Generator
850.00
01BK4055
50 MHZ Dual Channel Arb Generator 1,050.00
ACCESSORIES
01BKAD40G
USB-to GPIB Adapter
200.00
01BKCC21
BNC Breakout-to-Alligator Clips
11.50
01BKCC510
General Purpose Function Generator Kit 169.00
01BKCC520
Deluxe Function Generator Kit
365.00
01BKTLFG
Function Generator Test Lead Set
82.00
32
5MHz / 12MHz / 25MHz
The AFG-2100 / 2000 series arb
function generators are DDS
(Direct Digital Synthesized)
based generators designed to
accommodate educational and
industrial requirements for accurate
and affordable signal sources.
User can create and generate
Arbitrary Waveforms with 10 bit vertical resolution and
4K waveform memory. Also, standard outputs Sine, Square
(Pulse), Ramp (Triangle), Noise and Arbitrary Waveforms.
The AFG-2100/2000 Series includes 6 models in three
frequency bands of 5MHz, 12MHz and 25MHz. Besides the
basic features of the whole AFG-2100/2000 Series, AFG-2100
also carries additional features of AM/FM/FSK Modulation,
Sweep, and Frequency Counter.
Features:
• 0.1Hz to 5/12/25 MHz with in 0.1Hz Resolution
• Sine, Square, Triangular, Noise and Arbitrary Waveform
• 20MSa/s Sampling Rate, 10 bit Vertical Resolution and 4k
Point Memory for Arbitrary Waveform
• 1% ~ 99% adjustable duty cycle for Square Waveform
• Waveform Parameter Setting Through Numeric Keypad Entry
& Knob Selection
• Amplitude, DC Offset and Other Key Setting Information
Shown on the 3.5” LCD Screen Simultaneously
• AM/FM/FSK Modulation, Sweep, and Frequency Counter
Functions (AFG-2100 only)
• USB Device Interface for Remote Control and Waveform
Editing
• PC Arbitrary Waveform Editing Software
Part No.
01AFG2005
01AFG2105
01AFG2012
01AFG2112
01AFG2025
01AFG2125
01AFG2225
Description
5MHz Generator
5MHz w/ Counter, Sweep + AM/FM
12MHz Generator
12MHz w/ Counter, Sweep + AM/FM
25MHz Generator
25MHz w/ Counter, Sweep + AM/FM
2ch ; 25MHz w/ Counter, Sweep + AM/FM
FUNCTION / ARBITRARY
GENERATOR / COUNTER
PC BASED
• Output Freq: 1Hz – 25MHz
• Output sine, square, ramp, AMFM, gauss
noise, white noise or arbitrary wave
• Simulation of Real Word Signals or sensors
• USB interface, plug and play
• Operating System: Windows NT, XP, Vista
• Max Amp ±3.5V max.
• Frequency Counter: DC to 50MHz
Part No. 01FAGC1 • Price: $190.00
ELECTRONIX EXPRESS / RSR • 900 Hart Street, Rahway, NJ 07065
Price
$280.00
365.00
380.00
445.00
455.00
485.00
495.00
FUNCTION / SIGNAL GENERATORS
FUNCTION / SWEEP
FUNCTION / ARB GENERATORS
/ ARBITRARY GENERATOR
40MHz / 80MHz / 122MHz
Siglent’s SDG2000X is a series of dualchannel function/arbitrary waveform
generators with specifications of up to
120MHz maximum bandwidth, 1.2GSa/s
sampling rate and 16-bit vertical
resolution. The proprietary TrueArb &
EasyPulse techniques help to solve
the weaknesses inherent in traditional DDS generators when
generating arbitrary, square and pulse waveforms.
Features:
• Dual-channel, 120MHz maximum bandwidth, 20Vpp maximum
output amplitude, high fidelity output with 80dB dynamic
range.
• High-performance sampling system with 1.2GSa/s sampling
rate and 16-bit vertical resolution. No detail in your waveforms
will be lost.
• Innovative TrueArb technology, based on a point-by-point
architecture, supports any 8pts~8Mpts Arb waveform with a
sampling rate in range of 1μSa/s~75MSa/s.
• Innovative EasyPulse technology, capable of generating lower
jitter Square or Pulse waveforms, brings a wide range and
extremely high precision in pulse width and rise/fall times
adjustment.
• Analog and digital modulation types: AM, DSB-AM, FM, PM,
FSK, ASK, and PWM.
• Sweep and Burst functions.
• High precision Frequency Counter.
• Standard interfaces: USB Host, USB Device (USBTMC), LAN
VXI-11, Optional interface: GPIB.
• 4.3” touch screen display for easier operation.
Part No.
01SDG2042X
01SDG2082X
01SDG2122X
Description
40MHz Waveform Generator
80MHz Waveform Generator
122MHz Waveform Generator
Price
$499.00
$619.00
$899.00
DDS FUNCTION
GENERATORS
MODELS: DG1022A (25MHz); DG1032Z
(30MHz); DG1062Z(60MHZ)
These high quality waveform generators
use advanced DDS technology. Output
waveforms include: Sine, Square, Ramp,
Triangle, Pulse, Noise, DC and Arbitrary.
Output amplitude: 2.5mV to 10Vpp (≤
10MHz); 2.5mV to 5Vpp (≤ 30MHz);
2.5mV to 2.5Vpp (60MHz)
DG1022A
DG1032Z
• 2ch on all models
• Interface: USB, LAN, GPIB, RS232, USG Host to support
USB flash, USB printer
• Built in pulse generator with adjustable width and edge.
• 200Msa/s sample rate, 16Mpts memory (DG1032Z, DG1062Z)
• Modulation: M, FM, PM, FSK, PWM
• Sweep: Linear or Log, Burst
• Digital Logic Output Module (optional): The first mixed signal
• generator (MSG) with 16 digital data channnels and 2 cloc
• channels
• Power: 100–240VAC, 45–440Hz, 50W
• Dimensions & Weight: DG1022A: 232x108x288mm; 6lbs
DG1032Z, DG1062Z: 262 x 112 x 318mm; 7 lbs
Part No. Description
01DG1022A
01DG1032Z
01DG1062Z
25MHz Generator
30MHz Generator
60MHz Generator
Price
$499.00
680.00
860.00
MODULAR ARBITRARY GENERATOR
AFG-100/200 SERIES
MODEL 4040B: 20MHZ
MODEL 4045B: 20MHZ WITH ARB FUNCTION
DDS (Direct Digital Synthesis) 20 MHz
function generators with upgraded features
including a full numeric keypad, large color
screen and independent output and DC
offset amplifiers. The 4045B model also
includes a 12-bit, 50MSa/s, 1K memory
Arbitrary Waveform capability.
• All models 1uHz ~25MHz with USB interface signal control
• Choice of 1 channel or 2 channel models
• AFG125P and AFG225P models feature built-in power supply
with 2.5V, 3.3V, 5V @ 600mA
• 120 MSa/s, 10 bit resolution and arbitrary waveform editing
function with 4K point memory
• AM, FM, PM, FSK, SUM(AFG-225/225P) modulation, sweep
and burst functions
4040B
• Arbitrary waveform function (Model 4045B)
• 20 MHz Sine / 20 MHz Square waveforms
• Menu-driven front panel keypad, rotary
control knob
• Lin / log sweep, AM / FM mod, Burst mode, counter 4045B
• SCPI compatible USB interface
• 0.01 Hz ~ 20 MHz sine/square frequency range
• Color, LCD display
Part No.
01BK4040B
01BK4045B
Description
20MHz; DDS Generator
20MHz; DDS Generator with ARB Function
Price
$550.00
750.00
Part No.
01AFG125
01AFG125P
01AFG225
01AFG225P
Description
Price
1 CH 25 MHz Arb
$239.00
1 CH 25 MHz Arb w/ power supply 264.00
2 CH 25 MHz Arb
309.00
2 CH 25 MHz Arb w/ power supply 333.00
Call Toll Free: 1 (800) 972-2225 • In NJ: (732) 381-8020 • Fax:
(732) 381-1006
(732) 381-1572
33
FUNCTION / SIGNAL GENERATORS
MINI DDS FUNCTION
DUAL CHANNEL FUNCTION/
Model:
FG 085
ARBITRARY WAVEFORM GENERATORS
GENERATOR
MODELS: 4063AWG – 80MHZ; 4064AWG – 120MHZ; 4065 – 160MHZ
The 4060 Series are capable of
generating stable and precise
sine, square, triangle, pulse, and
arbitrary waveforms and plenty of
more features.
Features:
• 14-bit, 500 MSa/s, 512k point
arbitrary waveform generator
• Two independent channels with one button synchronization
• Large 4.3-inch LCD color display
• AM/DSB-AM/ASK/FM/FSK/PM/PWM modulation functions
• Variable DC offset
• Highly adjustable pulse duty cycle from 0.0001% to 99.9999%
• Internal/external triggering
• Gate and burst mode
• 36 built-in predefined arbitrary waveforms
• Store/recall up to 10 instrument settings and 32 user-defined arbitrary
waveforms
• USB device port (USBTMC-compliant) with front panel USB host port
• GPIB connectivity with optional USB-to-GPIB adapter (model AK40G)
• Short circuit output protection
• LabVIEW drivers available
Part No.
01BK4063
01BK4064
01BK4065
Description
80 MHz Function/ARB Generator
120 MHz Function/ARB Generator
160 MHz Function/ARB Generator
USG SERIES
Price
$1,295.00
1,895.00
925.00
RF SIGNAL GENERATORS
RF signal generators which are
pocket-sized and USB compatible.
Features:
• PC USB interface powered and controlled
• Pocket size – 30mm W x 103mm H x 30mm D
• Output power range: -30dBm ~ 0dBM
• Continuous wave signal without any modulation
• Support fixed frequency, frequency sweep, frequency hopping
and power sweep mode
• 107dBc/Hz phase noise @ 100kHz offset
• Software supports different operating systems
Part No.
01USGLF44
01USG0103
01USG0818
01USG2030
01USG3044
01ADP0003
Description
35 MHz ~ 4.4 GHz RF generator
100 MHz ~ 300 MHz RF generator
800 MHz ~ 1.8 GHz RF generator
2 GHz ~ 3 GHz RF generator
3 GHz ~ 4.4 GHz RF generator
N female to SMA adapter 50 ohm
Price
$ 475.00
450.00
450.00
450.00
450.00
40.00
RF SIGNAL GENERATOR
MODEL SG4160
• 100kHz to 150MHz on six bands
• Output to 450 MHz on harmonics
• AM modulation, Internal or External,
0% to 100%
• Frequency monitor output for
external frequency counter
• Step and variable attenation to
-40db
Part No. 01SG4160 • Price: $189.95
34
• Generating continuous
waveforms of Sine, Square,
Triangle, Ramp (up and down),
and Staircase (up and down)
• Generating servo test/control
signals in micro-second
resolution with user programmable pulse width, amplitude, and
cycle
• Setting of frequency (or period), amplitude, and offset is done
with digits - quick and straightforward
• Frequency (period), amplitude, and offset can be incrementally
adjusted with rotary encoder
• Settings are memorized after power down.
• Can be used as an adjustable DC voltage source by setting
amplitude to 0
• Dimensions: 6" x 2.2" x 12" Wt. : 4 oz
Part No. 01FG085 • Price $56.00
SWEEP FUNCTION
GENERATORS
MODELS: FG-8102, FG-8105,
FG-8110
• Sweep Function Generators with Pulse Generator &
Frequency Counter
• External / internal counter feature
• External / internal linear sweep
• Sine, square, triangle, TTL, ramp, pulse, saw tooth
waveforms
• Variable output level control with 20dB attenuator
Part No.
Description
Price
01FG8102
2 MHz Sweep Function Generator
$259.00
01FG8105
5 MHz Sweep Function Generator
309.00
01FG8110
10 MHz Sweep Function generator
359.00
10MHZ PULSE
GENERATOR
MODEL 4030
A versatile signal source which combines four functions into one unit –
waveform generation, pulse generation
(through variable symmetry), frequency
sweep operation and triggered operation. The 4030 offers low rise and fall time pulsed signals up to
10MHz, with a 4-Digit LED display
•
•
•
•
•
•
•
0.1Hz ~ 10MHz in 8 decade ranges
4-digit LED display
Rise and fall time 10µS approx.
Normal and inverting output
Width: 50nS ~ 50mS (6 decade ranges & variable)
Internal, external and manual triggering
Eight crystal spot frequencies
Part No. 01PG4030 • Price: $395.00
ELECTRONIX EXPRESS / RSR • 900 Hart Street, Rahway, NJ 07065
FUNCTION / SIGNAL GENERATORS / MULTI-TESTERS
4 – IN – 1 INSTRUMENT
FUNCTION / ARB GENERATORS
LAB BENCH SET-UP
60MHZ / 100MHZ / 160MHZ / 200 MHz
MODEL RSR 4-IN-1
The DG4000 is a
multifunctional generator
that helps accomplish
a range of testing by
combining many functions
into one instrument. With
capabilities including
Function Generation,
Arbitrary Waveform
Generation, Pulse Generation, Harmonic Generation,
Analog/Digital Modulation source, and Counter the
DG4000 series can handle a broad array of signal
emulation applications from near DC up to 60 or even
200 MHz depending on model and function. The DG4000
utilizes Direct Digital Synthesizer (DDS) technology,
which delivers stable, precise, low distortion signals. The
sleek, upright design features a high resolution 7" display
screen, while the user-friendly interface design and panel
layout improves efficiency.
CONTAINS ALL FOLLOWING BENCH
TYPE INSTRUMENTS:
— Sweep Function Generator
— Triple Output Power Supply
— Digital Multimeter
— Oscilloscope
Features:
• Generators up to 200 MHz
• 2 output channel
• 500 MSa/s sample rate
• 130 built-in waveforms
• 7-inch color LCD display
• 14 bit vertical resolution
• Standard Interfaces including LXI-C (Ethernet), USB
device and USB host
Part No.
Description
Price
01DG4062
60MHz Waveform Generator
$920.00
01DG4102
100MHz Waveform Generator
$979.00
01DG4162
160MHz Waveform Generator
$1,249.00
01DG4202
200MHz Waveform Generator
$1,790.00
4-IN-1 LAB TESTER
FG-32
•
•
•
•
Save time AND MONEY by ordering the 4-IN-1
All quality, best selling models included
Simplify your ordering process
Analog and Digital Storage Scope versions
available
• Customized packages available for ten or more
units (add or substitute other models). Call for
custom package quote (10 + required)
PHSY3002-3
DM9803R
DETAILS ON INSTRUMENTS:
GOS-620
Sweep Function Generator – Model FG-32. Best
value, top seller. 3MHz with digital display. Six
waveform functions (sine, triangle, square, ramp,
pulse). Internal/External frequency counter function
Triple Output Power Supply – Model
PHSY3002-3. Best value, top seller. DC outputs
GDS1052U
are variable 0 ~ 30VDC @ 0 ~ 2 amps (two
outputs), and a fixed 5V @ 3 amp.
Digital Multimeter – Model DM9803R. Best value,
top seller. Bench DMM with large, 3 ¾ LCD display with back light and
42 segment bar graph. RS232 computer interface included with software
and cable. DC, AC, Resistance, Capacitance, Frequency functions. AC
or DC (battery) operation possible.
Oscilloscope – Model GOS-620 (included with 01RSRANA4). Best
value and top seller in its class. 20MHz, dual channel analog scope.
High sensitivity with ALT trigger function
Oscilloscope – GW Instek Model GDS1052U (included with
01RSRDIG4). 50MHz, 2 channel digital scope
Part No.
Description
01RSRANA4
01RSRDIG4
Four-In-One Bench Set-up w/20MHz Analog Scope $750.00
Four-In-One Bench Set-up w/50Mhz Digital Scope
735.00
Price
FOUR-IN-ONE MULTI TESTER
MODEL: US 9170A
FUNCTION GENERATOR,
FREQUENCY COUNTER, POWER
SUPPLY, DIGITAL MULTIMETER
• DDS Function Generator: 0.1-10MHz; sine, square, triangle, pulse,
TTL outputs
• Frequency Counter: Ch A: 1 Hz-110 MHz;
Ch B: 100 MHz - 2.7 GHz
• DC Power Supply: Adj volt output: 0-30V/0-3A
& 3 fixed outputs: +/- 15V/1A, +5/2A
• Digital Multimeter: AC/DC -750/1000V; 20A
0.1 to 80M ohms, cap 1pf to 100uf, Temp
-50 degrees C to 1372 degrees C RSR-232
interface
• Size: 15" x 12.5" x 6.6" ; wt. 30.2 lbs
• Versatile – four essential test
equipment pieces packaged in
one unit
• RF Generator – 100 KHz–110
MHz with AM/FM capability
• Frequency Counter – High
sensitivity with 5 digit display.
100 MHz
• Function Generator –
1 Hz–1MHz
Part No. 01UIUS9170A • Price: $925.00
Part No. 01GL9004 • Price: $1,195.00
FUNCTION GENERATOR, RF GENERATOR,
POWER SUPPLY AND FREQUENCY COUNTER
MODEL 9004
• Power Supply – 0–30
VDC,
0–2 Amp Variable
• 3 digit LED display for
voltage or current. Current
limit LED indicator
Call Toll Free: 1 (800) 972-2225 • In NJ: (732) 381-8020 • Fax:
(732) 381-1006
(732) 381-1572
35
SPECTRUM ANALYZERS
SPECTRUM ANALYZER
3 GHZ SPECTRUM
2.1 GHz / 3.2 GHz
Siglent’s SSA3000X family
of spectrum analyzers offer
a frequency range of 9 KHz
to 2.1 GHz / 3.2 GHz. With
their light weight, small size,
and friendly user interface,
the SSA3000s present a
bright easy to read display, powerful and reliable automatic
measurements, and plenty of impressive features. Applications
are many, but include research and development, education,
production, maintenance, and many more.
ANALYZER
MODEL DSA 1030 / 1030A
•Range- 9KHz – 3GHz
•DANL: -138 dBm (Model DSA 1030)
-148 dBm (Model DSA 1030A)
• Min RBW: 100 Hz (Model DSA 1030)
10 Hz (Model DSA 1030A)
• Trigger Source: Free Run, Video, External
• Interfaces: USB, LAN, GPIB (optional)
• RF Input Max: +30dBm
• External Trigger: 5VTTL
•Dimensions: 15.7 x 8.8 x 6.3"; wt: 13.7 lbs
Part No.
Description
01DSA1030
Spectrum Analyzer 3.0 GHz
01DSA1030-PA
Spectrum Analyzer with
PreAmplifier
01DSA1030-TG3 Spectrum Analyzer with
Tracking Gen
01DSA1030PATG3 Spectrum Analyzer with
PreAmplifier & Tracking Gen
01DSA1030A
Spectrum Analyzer 3.0 GHz
01DSA1030ATG3 Spectrum Analyzer with
Tracking Gen
Features:
Price
$2,999.00
$3,659.00
$3,499.00
$4,159.00
$4,999.00
$5,998.00
3 GHZ SPECTRUM ANALYZER
MODEL GSP830
• High resolution TFT color
display
• USB and RS232 standard, GPIB interface
optional
• Outstanding noise
floor level (-117dBm @
600MHz, 3K RBW) and
extreme sensitivity for picking up weak signals
• Define own macros in 10 sequence sets while pause, repeat
or single run mode can for selected for different applications
• Additional advanced features include auto set, split window,
power measurements, pass/fail
• Some major options include tracking generator, battery pack,
preamplifier. More listed below.
Part No.
Description
Price
01GSP830
3 GHZ Spectrum Analyzer
$4,100.00
01GSP830TG
With Tracking Generator
5,200.00
FACTORY INSTALLED OPTIONS AT TIME OF PURCHASE
01OPT02BAT
Battery pack
400.00
01OPT03PPM
+/- 1 ppm Stability
330.00
01OPT04300
300Hz RBW
1,000.00
01OPT059120
9KHz and 120KHz RBW
1,000.00
01OPT0610100 10KHz and 100KHz RBW
1,000.00
01OPT07AMFM AM/FM demodulator & 10KHz,
1,795.00
100KHz RBW
01OPT08GPIB
GPIB Interface
270.00
Note: only one of the RBW options can be selected
ACCESSORIES
01GSC001
Soft Carry Case
200.00
01GKT001
General Kit Set
295.00
01GKT002
CATV Kit Set
360.00
01GKT003
RLB Kit Set
240.00
01GSPANTAD
Antenna with adapter
40.00
01GAP801
Preamplifier
600.00
01GKT006
EMI Probe Kit Set
1,435.00
01GRA404
Rack Adapter Panel
229.00
01GSPCAB
3' RF Cable For External
52.00
Equipment (N Male to N Male)
01GTL401
DC Jack to Lighter Plug Cord
36.50
36
•
•
•
•
•
•
•
•
•
•
•
•
All-Digital IF Technology
Frequency Range from 9 kHz up to 3.2 GHz
-161 dBm/Hz Displayed Average Noise Level (Typ.)
-98 dBc/Hz @10 kHz Offset Phase Noise (1 GHz, Typ.)
Total Amplitude Accuracy < 0.7 dB
10 Hz Minimum Resolution Bandwidth (RBW)
Standard Preamplifier
Up to 3.2 GHz Tracking Generator Kit (Opt.)
Reflection Measurement Kit (Opt.)
Advanced Measurement Kit (Opt.)
EMI Pre-compliance Measurements Kit (Opt.)
10.1 lnch WVGA 1024x600 Display
Part No.
01SSA3021X
01SSA3032X
01EMISSA3000X
01TGSSA3000X
01AMKSSA3000X
01REFISSA3000X
Description
9 kHz~2.1 GHz Spectrum Analyzer
9 kHz~3.2 GHz Spectrum Analyzer
EMI Measurement Kit (software)
Tracking Generator Kit (software)
Advanced Measurement Kit (software)
Reflect Measurement Kit (software)
Price
$1,595.00
3,295.00
559.00
169.00
465.00
429.00
SPECTRUM ANALYZER
3.3GHZ/8.5GHZ – HANDHELD
MODELS 2650A / 2652A / 2658A
A compact, light weight and cost-effective spectrum
analyzer for quick and precise signal investigations,
especially away from the bench. At a weight of only
4 pounds (1.8 kg), it is by far the lightest full-featured
spectrum analyzer available, yet it delivers performance
and features comparable to a full-size bench spectrum
analyzer.
• Impressive 4 hour battery life; easy-to-replace
rechargeable Lithium-Ion battery
• Fast sweep speed, minimum 10 ms, to help locate and identify elusive,
transient interference signals
• DANL (displayed average noise level) of -127 dBm
• Large easy-to-read color display, 640 x 480 resolution
• Measurement functions: channel/adjacent channel power, occupied
bandwidth, electric and magnetic field strength
• Convenient Auto tune function
• PC Software for remote control and documentation of measurement
results (included)
• Conveniently store measurement results and screen shots in bitmap
format to USB flash drive
Part No.
01BK2650A
01BK2652A
01BK2658A
Description
Spectrum Analyzer 3.3GHz
Spectrum Analyzer 3.3 GHz
With Tracking Generator
Spectrum Analyzer 8.5 GHz
ELECTRONIX EXPRESS / RSR • 900 Hart Street, Rahway, NJ 07065
Price
$6,450.00
8,450.00
10,995.00
RF
COMMUNICATION
COMBO
3TRAINING
GHZ SPECTRUM ANALYZER
AND BASEBAND
SIGNAL / RF CARRIER SIGNAL
MODULE MODEL GSP-730 SPECTRUM
ANALYZER 3 GHZ
MODEL GRF-1300 TRAINING
MODULE FOR USE WITH GSP-730
An affordable, but full
function spectrum analyzer and a
specially (designed for education) training module.
Together
with a PC an instructor may present a fundamental RF
Communication Course via Powerpoint, and control
experiments (which come with the trainer), simultaneously.
A VGA output enables images to be transferred to a
projector, or larger screen display.
GSP-730 Spectrum Analyzer
• Frequency Range: 150KHz ~ 3GHz
• Autoset funtion
• RBW ranges, 30KHz,
100KHz,
300KHz, 1MHz
• ACPR/CHPW/OCBW
measurement
• Built in limit line, 5
markers, split window function
• 3 different trace colors,
5.6" TFT LCD display
• USB and RS232, and VGA output
Description
3 GHz Spectrum Analyzer
Training Module for use
with GSP-730
MODELS: DSA815/DSA832/DSA875
The DSA800 Series is a compact and light Spectrum Analyzer
with premium performance for portable applications. The use
of digital IF (intermediate
frequency) technology
guarantees reliability and
performance to meet the most
demanding RF applications.
The very large display (20.3
cm / 8") of the Rigol DSA815
Spectrum Analyzer with a resolution of 800x480pixels provides
a very good overview over all its comfortable functions like Auto
Tune, Auto Range, Auto Scale and Auto Couple. These functions
enable the analyzer to acquire signals and match parameters
automatically, instead of the manual process necessary with a
traditional analyzer.
The Rigol Spectrum Analyzers have a sophisticated and easy to
use user interface and offers multiple functions for all tasks. The
menu navigation is very intuitional in use and all functions and
parameters are easy to reach because of the graphical interface.
•
•
•
•
•
•
•
•
•
•
GRF-1300 Training Module for use with Spectrum
Analyzer
• Baseband Signal: sine, triangle, square. Frequency
range: 0.1 ~ 3MHz
• RF frequency: 870 ~
920MHz
• AM/FM modulation
• 5 programmable on/off
switches
and 5 test points
to simulate 8 failure
conditions for trouble shooting
• USB enables remote control
• 10 experiments included
Part No.
01GSP730
01GRF1300
SPECTRUM ANALYZERS
SPECTRUM ANALYZER
Price
$899.00
359.00
Frequency Range: 9 kHz to 1.5 GHz/3.2GHz/7.5GHz
Typical -135 dBm Displayed Average Noise Level (DANL)
-80 dBc/Hz @10 kHz offset Phase Noise
Total Amplitude Uncertainty <1.5 dB
100 Hz Minimum Resolution Bandwidth (RBW)
Standard with Preamplifier and AM/PM Demodulation Function
(DSA815 only)
Tracking Generator available
8 inch (800x480 pixels) high definition display with clear, vivid,
and easy to use graphical interface.
Complete connevtivity with standard interfaces such as LAN,
USB Host, USB Device, and GPIB (optional)
Compact size, and light weight 4.25 kg (9.4lbs)
Part No.
01DSA815
01DSA815TG
01DSA832
01DSA832TG
01DSA875
01DSA875TG
01PA-DSA832
01PA-DSA875
01TX1000
01RFATKIT
01RFADKIT
01AMK815
01EMI815
01RMSA815
01VB1020
01VB1080
Description
Price
1.5 GHz Model
$1,295.00
1.5 GHz w/ Tracking Generator $1,495.00
3.2 GHz Model
$6,499.00
3.2 GHz w/ Tracking Generator $8,098.00
7.5 GHz Model
$7,999.00
7.5 GHz w/ Tracking Generator $9,598.00
Options
Preamplifier for DSA832
$599.00
Preamplifier for DSA875
$599.00
Demonstrator Board w/ Built in
$945.00
1GHz Oscillator, mixer, filters & amp
RF Alternator Kit-6db(1);10db(2)
$499.00
RF Adapter Kit, 9 diff adapters
$299.00
Adv. Measurements Kit for DSA815 $549.00
EMI Filter & Quasi Peak Detector $659.00
Rack Mounting Kit for DSA815
$374.00
800MHz to 2GHz VSWR Bridge
$659.00
including DSA800-VSWR Software License
2GHz to 8GHz VSWR Bridge
$699.00
including DSA800-VSWR Software License
Call Toll Free: 1 (800) 972-2225 • In NJ: (732) 381-8020 • Fax:
(732) 381-1006
(732) 381-1572
37
LOGIC ANALYZERS
3GHz SPECTRUM ANALYZER
MODEL GSP-9300
GSP-9300 is a light, compact
and high C/P ratio 3GHz spectrum analyzer. The GSP-9300
frequency range stretches from
9kHz to 3GHz and features
many functions such as radio
frequency and power measurement, 2FSK digital communications analysis, EMC pretest, and
active component P1dB point
measurement, etc. It can support
the fast sweep speed up to 307us. It is the ideal instrument for various
application fields such as the basic operation of R&D, research and
school lecture, engineering maintenance and test for mass production.
This spectrum analyzer is suitable for automatic test systems and vehicle mounted operation. The GSP-9300 spectrum analyzer is very user-friendly. All frequently used functions can be applied quickly through
function keys and five languages (English, Russian, Traditional Chinese,
Simplified Chinese and Japanese) are available for user interface.
Features:
• Frequency Range: 9kHz ~ 3GHz
• High Frequency Stability: 0.025ppm
• 3dB RBW: 1Hz ~ 1MHz
• 6dB EMI Filter: 200Hz, 9kHz, 120kHz, 1MHz
• Phase Noise: -88dBc/Hz @1GHz, 10kHz Offset
• Built-in Measurement Functions: 2FSK Analysis, AM/FM/ASK/
FSK Demodulation & Analysis, EMC Pre-test, P1dB point, Harmonic, Channel Power, N-dB bandwidth, OCBW, ACPR, SEM,
TOI, CNR, CTB, CSO, Noise Marker, Frequency Counter, Time
Domain Power, Gated Sweep
• Built-in Spectrogram and Topographic Display Modes
• 886MHz IF Output for User’s Extended Applications
• Remote Control Interface: LAN, USB, RS-232, GPIB (Optional)
• Built-in Preamplifier, 50dB Attenuator, and Sequence Function
• Optional 6GHz Power Sensor, Tracking Generator, Battery Back
• Tracking Generator Options is Installed at Factory When Base
Unit is Ordered.
Part No.
01GSP9300
01GSPTG93
Accessories
01GSP9300BAT
01GSPPWS06
01GSP9300GPIB
Description
3GHz, Spectrum Analyzer
Tracking Generator
Price
$4,545.00
$1,450.00
DC Battery Pack
RF Power Sensor 6GHz
GPIB Interface
$240.00
$2,915.00
$300.00
LOGIC ANALYZER
PC BASED
LOGIC ANALYZER
PORTABLE
FEATURES:
• A portable small-sized
analyzer
• Easy to use; makes
debugging convenient
• Provides a PC-LINK
interface to observe and
print waveforms using
your PC
• 5.6" color TFT display
SPECIFICATIONS
• 250MHz timing and 100MHz state analysis (LA2025)
• 500MHz timing and 200MHz state analysis (LA2050)
• Saved Waveform: 512K x 32 (LA2025)
• Saved Waveform: 1M x 32 (LA2050)
•Memory: 2M (LA2025), 4M (LA2050)
• Skew: Typically less than 2.0 ns, maximum: 3.0 ns
• Speed of scanning: 5s/div – 14 ns/div
• Trigger channel: 32CH (8CHx4)
• DPI: 1 bit
• Trigger signal: 5ns
• Various ways to collect data: Single, Run, Autostore
• Size: 12.2 x 2.8 x 5.9 (inches)
• Weight: 5 lbs.
• Power: 90–240 VAC, 50–60 Hz
• Package contents: Unit; data pods (4); lead sets (4), test
probe (36); AC cord; USB cable; CD and manual
Part No
01LA2025
01LA2050
Price
$1,850.00
2,695.00
LOGIC ANALYZER PC BASED
MODEL 3600
32 CHANNEL
WITH USB
Operates as a stand-alone unit or connect to computer via
USB . Unit comes complete with all necessary software,
data pods and logic grabbers.
Global Specialties Model GSPCLA-32 is a 32 Channel,
PC-Based Logic Analyzer. The logic analyzer is great for space
savings and is easy on the budget. The GS-PCLA-32's graphic
user interface is easy to use and allows users to instantly, and
accurately measure signals with minimal instruction. Perfect for
education, R&D and hobbyists.
• 32 iput channels in 4 groups with 8 channels for each
group
• 4 groups may be combined in three different
configurations
• Current limit and over voltage protection each channel
name-definable
• Internal/external clock, data search, zoom, cursor,
simulation, sequence adjusting and keyboard operation features.
Part # 01GSPCLA32 • Price: $640.00
Part # 01GLLA3600 • Price: $2,899.00
32 CHANNEL WITH
COMPUTER INTERFACE
38
ELECTRONIX EXPRESS / RSR • 900 Hart Street, Rahway, NJ 07065
FREQUENCY COUNTERS
2.5 GHz FREQUENCY COUNTER
MODEL FC-2500
•
•
•
•
•
•
•
Handheld instrument ideal for VHF and UHF frequencies.
3 ranges 2500 MHz, 500 MHz, 10 MHz.
8 digit LCD display.
Frequency, period, data hold, max, min, average.
Best resolution 0.1Hz with 50mV sensitivity.
Battery operation or AC power. Battery included.
Optional: Antenna with BNC connector
Part No.
Description
01FC2500
01AT20
16DFC9
Frequency Counter
Antenna w/BNC
Adaptor 9V DC
Price
$155.00
6.95
6.50
FREQUENCY COUNTER
MODEL FC-8010
• Range: 1 Hz - 120MHz, 2 ranges
• Accuracy: ± 1Digit + Time Base Accuracy
• Max. Input: 5 Vrms for 50 ohm, 150 Vrms
for 1M ohm
• Impedance: 1M ohm, 35 pF
• 8 Digit Display with overflow indicators
• Gate time switch selectable from 0.1
second to 10 seconds.
FREQUENCY COUNTERS
MODELS GFC-8131H, GFC-8270H
Part No.
01FC8131
01FC8270
• 10nHz resolution
for 1 Hz
• Self diagnostic
• Variable trigger
level control
• Display hold
function
Description
1.3GHz Model
2.7GHz Model
Price
$275.00
355.00
FREQUENCY COUNTER
UNIVERSAL 1.5GHZ
MODEL FC-8150U
• Frequency measuring range : 0.1Hz
to 100MHz in A, B input 80MHz to
1.5GHz in C input
• Period and Total measurement for
input A
• Time interval and Ratio
measurement for input A and B
• Trigger level adjustment for input A
• Separate and Common mode selectable for input A
and B
• Slope mode selectable for input A and B
• 9 Digit display with 0.01 mHz resolution in 1 Sec.
• RS-232C serial interface function for communicating with computer
• High sensitivity External reference input function( Higher than 1.5
Vrms)
• Reciprocal technique for high resolution at low counting frequencies
Part No. 01FC8150U • Price: $320.00
LED DISPLAY 8 DIGIT
MODEL MS6100
FEATURES:
• Four measuring modes:
frequency, period, totalize
and self check
• 10MHz OSC out
• Dual voltage supply
110VAC / 220VAC
SPECIFICATIONS:
Frequency: Channel A: 10Hz – 100MHz
Channel B: 100MHz – 1.3GHz
Period:
0.1S to 0.1µS
Totalize:
10Hz to 10MHz (1 count resolution)
Dimension: 9.5" x 2.8" x 11.5"
Weight:
~ 4 lbs.
Part No. 01FCMS6100 • Price: $155.00
Part No. 01FC8010 • Price: $185.00
• Frequency, period
and RPM
• High resolution at
both low and high
• 10mV RMS high
sensitivity
FREQUENCY COUNTER 1.3 GHZ
2.7 GHz FREQUENCY COUNTER
MODEL FC-2700
• 2.7 GHz bench type frequency counter.
• High sensitivity for VHF and UHF
frequency measurement. Useful for
CB bandwith.
• Frequency, period, data hold, relative
measurement, max, min, average.
• 8 digit LCD display.
• Power supply from battery or AC adapter (Optional).
• RS232 serial interface.
• TCXO temperature compensated crystal oscillator time base for
high stability and accuracy.
Part No.
Description
01FC2700
01A26-8016
01NN23
16DFC9
Frequency Counter
$260.00
BNC Female to "N" Male Adapter
4.50
Probe with Double “N” Coaxial Connector 19.50
Adaptor 9V DC
6.50
3.5GHZ
Price
FREQUENCY COUNTER
MODEL 1856D
•
•
•
•
Portable instrument for field use
Wide measuring range from 3.5GHz
Bright 9-digit LED display
High sensitivity for VHF and UHF
frequencies
• Period mode for accurage low frequency
measurements
• Totalize mode permits counting of individual events
• Accurate TCXO timebase
Part No.
01FC1856
Description
3.5 GHz Frequency Counter
Call Toll Free: 1 (800) 972-2225 • In NJ: (732) 381-8020 • Fax:
Price
$540.00
(732) 381-1006
(732) 381-1572
39
OSCILLOSCOPES
100MHZ DIGITAL OSCILLOSCOPE
MODEL: 2190E
It features an upgraded
high 800 x 480 resolution,
7-inch TFT color display
and a LAN interface
(standard).
Additionally, the 2190E
offers incredible measurement functionality that you
wouldn't expect from an entry-level oscilloscope. For
example, the 2190E boasts 40,000 points of waveform
memory, versatile triggering capabilities and advanced
tools including a digital filter with adjustable limits, pass/
fail testing, and waveform recorder mode. Downloadable
PC software is available and allows users to control all
oscilloscope parameters via a PC. Packed with features
and engineered to do more, the new 2190E is the ideal
tool for instructors, students, engineers, technicians and
hobbyists alike.
Features:
• 100 MHz bandwidth, 1 GSa/s sample rate
• Large, 7” widescreen color display with 800 x 480
resolution offers a significantly larger viewing area than
typical economy oscilloscopes (5.7”)
• 32 automatic measurements
• FFT plus four additional math functions
• PC software that lets you remotely control the digital
storage oscilloscope and capture, save, and analyze
waveform data
• GPIB connectivity with optional USB-to-GPIB adapter
(model AK40G)
SCOPE
SWITCHABLE
60, 100, 250 MHZ
B.W. DC to 60/100/150
MHz. BNC to IC Test Hook,
with selectable X1, X10
switch. Includes 1 ea. probe,
spring hook, ground lead,
insulating tip, measuring tip,
IC tip, adjusting tool, channel identifier clips.
Part No.
05SPAK220
05SPAK510
05SPGL250
40
Description
60 MHz
100 MHz
250 MHz
1-9
$13.95
$17.95
21.95
100MHz / 200 MHz
Siglent's SDS1000X series
employs a new generation of SPO
technology. With excellent signal
fidelity, background noise is lower
than similar products in the industry.
The SDS1000X has a minimum
vertical input range of 500uV/div, an
innovative digital trigger system with high sensitivity and low
jitter, and a waveform capture rate of 60,000 frames/sec. Add
an impressive array of measurement and math capabilities,
options for an integrated 25 MHz arbitrary waveform
generator, as well as serial decoding, and the features and
high-performance of the SDS1000X oscilloscopes cannot be
matched at anywhere at this price.
Features:
• 100MHz, 200MHz bandwidth models
• Real-time sampling rate up to 1GSa/s
• Record length of 14Mpts
• Waveform capture rate is 60,000 wfms/s
• New generation of SPO technology
• Supports 256-level intensity grading and color temperature
display
• Intelligent trigger: Edge, Pulse, Window, Runt, Interval, Time
out (Dropout), Pattern
• Serial bus triggering and decode, supports protocols IIC,
SPI, UART, RS232, CAN, LIN
• Video triggers and supports HDTV
• Large 8 inch TFT-LCD display with 800 * 480 resolution,
Abundant interfaces: USB Host, USB Device (USBTMC), LAN
(VXI-11), Pass / Fail
Part No.
Description
Price
01SDS1102X
100MHz Oscilloscope
$499.00
01SDS1102X-S
100MHz Oscllscpe + Wavfrm Gen
$759.00
01SDS1202X
200MHz Oscilloscope
$659.00
01SDS1202X-S
200MHz Oscllscpe + Wavfrm Gen
$899.00
DIGITAL STORAGE SCOPES
GDS2000E SERIES
2CH/4CH; 70MHz to 200MHz
Part No. 01BK2190E • Price: $399
PROBE
OSCILLOSCOPES
10-99
$11.95
$15.95
19.95
100+
$9.95
$13.95
17.95
• 70MHz, 100MHz, 200MHz models
– either 2 or 4 channel
• Rapid refresh. waveform update
rate 120,000 wfm/s
• 1Gsa/s real-time sampling rate
each channel (2 ch models)
• 1Gsa/s max real-time sample rate
(each channel)
• 10M memory depth (selectable
based on speed needs)
• VPO waveform display technology
• 8” WVGA TFT LCD display
• FFT, hi-lo functions, segmented memory / waveform search
• Data log up to 100 hrs, trigger and decode functions
• Remote internet storage, multi language menu
Part No.
Description
Price
01INSTK2072E
70MHz 2 channel DSO
$ 670.00
01INSTK2074E
70MHz 4 channel DSO
$ 1,150.00
01INSTK2102E
100MHz 2 channel DSO
$ 920.00
01INSTK2104E
100MHz 4 channel DSO
$ 1,530.00
01INSTK2202E
200MHz 2 channel DSO
$ 1,300.00
01INSTK2204E
200MHz 4 channel DSO
$ 1,570.00
ELECTRONIX EXPRESS / RSR • 900 Hart Street, Rahway, NJ 07065
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement