MD Building Products 82586 Installation guide

MD Building Products 82586 Installation guide
 —
1 — [TT
Remove door from hinges by removing Measure width of door and cut door Install door bottom with drip fin to the
hinge pins. Remove damaged door bottom to length with scissors. outside. Attach to bottom of door with
bottom and clean surface. screws or nails between the vinyl fins.
Replace door onto hinges. Insert
hinge pins.
Remueva la puerta de las bisagras quitando las
clavijas. Remueva la base para puerta dañada y
limpie la superficie.
Mida el ancho de la puerta y corte la base para
puerta con tijeras,
hacia afuera, Fijelo en el canto inferior de la
puerta con tornillos o clavos entre las aletas de
vinilo. Cuelgue la puerta en las bisagras y instále
los pasadores.
€) Instale la base para puerta con la aleta de goteo
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement