Advertisement
Advertisement
ve" Ne FUSION HARDWARE GROUP TOLL FREE CUSTOMER SERVICE 877-215-4683 EXTERIOR INTERIOR NT EXTERIOR Keyed Entry Installation (1) Install latch into door, first adjusting for appropriate backset. @ Insert assembled Exterior half into door and through latch (3 Attach interior chassis with 2 screws - holes at 12 and 6 o'clock position. On levers be sure the “UP” label is on top (4) Screw threaded interior rose on to chassis (5) Attach Knob with set screw provided or “snap” Lever into place EXTERIOR CARE AND MAINTENANCE THE FOLLOWING CARE INSTRUCTIONS SHOULD BE FOLLOWED TO ENSURE A LONG LASTING FINISH: 1. Remove locks, or do not install locks, prior to painting you door. 2. Periodically clean with mild soap and a soft cloth only. Do not use abrasives or harsh chemicals, and avoid sharp or scratching objects. EXTERIOR Fold here. Place on door edge. hole at center of Template door edge. Hinges = CS Drill 1 in.(25mm) | Hinges ZN 1-3/4in. 1-9/16 in. 1-3/8 in. (45mm) (40mm) (35mm) a TFN-00FBO12 Rev 10/12-00 ">

Public link updated
The public link to your chat has been updated.
Advertisement