Video Splitters and Amplifiers - L-com

Video Splitters and Amplifiers - L-com
2K7_MV2_Monitor_Video.qxd
L-com
®
08/14/07
10:45 AM
Page 95
Video Splitters and Amplifiers >
CONNECTIVITY
PRODUCTS
Item #
Description
Monitor / Video
95
List Price
Gefen DVI Super Booster
Extending digital video via DVI beyond its specified 15 foot distance limitation using a DVI copper cable simply cannot replicate the highest resolutions
perfectly. In fact, sparkles or other objectionable distractions of the video often appear that indicate the signal has been degraded. But add a Gefen DVI
Super Booster to that same cable, and it can extend pristine HD resolutions up to 1080p or 1920x1200 up to 200 feet. It operates just like the DVI Booster,
but comes with an optional power supply that guarantees performance up to 200 feet.
GFN-DVI-141SB
GFN-DVI-141SB
Gefen DVI Super Booster
249.00
GFN-DVI-141SB
GFN-DVI-141SB
GFN-DVI-144
GFN-DVI-144
Gefen 1x2, 1x4, 1x6 DVI Splitters
Gefen's ex-tend-it DVI Splitters are stackable distribution hubs that send the same DVI graphics source to two or more DVI based digital screens (flat
panels or projectors). When multiple DVI Splitters are connected together, they can be used to create a 1x4 or a 1x6 distribution (one DVI input / multiple
DVI display outputs). When multiple units are stacked you can switch between all the inputs into all the outputs with the RMT-16 remote control.
GFN-DVI-144
GFN-DVI-144
GFN-DVI-145
GFN-DVI-145
GFN-DVI-147
GFN-DVI-147
GFN-RMT-16
GFN-RMT-16
Gefen 1x2 DVI Splitter
Gefen 1x4 DVI Splitter
Gefen 1x6 DVI Splitter
Gefen DVI Splitter Remote Control
299.00
598.00
897.00
149.00
GFN-DVI-145
GFN-DVI-145
Covid 1-In, 2-Out VGA Distribution Amplifier
The CVD9902 is a 1-in 2-out Distribution Amplifier of VGA (VGA thru UXGA) and other analog computer sources such as MAC, SUN, and SKI. Each output
is individually buffered producing excellent signal strength and quality. True 350 MHz of bandwidth provides unparalleled performance. The CVD9902 is
ideal for applications where a local monitor needs to be maintained, such as when using LCD projectors. Buffered outputs along with high bandwidth
also make the CVD9902 an excellent line driver. Such powerful electrical performance creates strong video images over long cable runs that are not
possible with standard splitters. The CVD9902 is housed in a rack mountable metal enclosure for rugged durability.
CVD9902
1-In, 2-Out VGA Distribution Amplifier
GFN-DVI-147
GFN-DVI-147
129.00
Gefen HDMI Super Booster
A great alternative to the traditional sender/receiver solutions for HD extension, the HDMI Super Booster enables your standard, "off the shelf" HDMI
cable to transmit brilliant HDTV visuals plus multichannel digital audio in a single cable way beyond the limited HDMI specification of 15 feet! Up to 200
feet can be easily traversed using your HDMI cable plus a HDMI Super Booster, which corrects any digital degradation that occurs when HDMI is used
to send AV signals beyond the specified distance. To go beyond the limited inherent HDMI distance or if you'd like to use two or more cables, these
Boosters are a perfect option. They replicate digital video signals, enabling you to "daisy chain" cables and repeaters as far as you need to go.
GFN-HDMI-141SB
GFN-HDMI-141SB
Gefen HDMI Super Booster
Item #
Description
CVD9902
185.00
1-9
10-24
25-99
100-249
250-499
Gefen 1:4 VGA Splitter
The ex-tend-it 1:4 VGA Hub allows a computer with a VGA graphics card to connect to up to four VGA compatible monitors or projectors at the same
time. Because this device allows one computer to drive multiple monitors for simultaneous viewing, you can use it to set up additional monitors in the
workspace, or to assist presentation environments by sending graphics to both monitors and projectors at the same time. Ships with one 6-foot VGA
cable (M-F) and a 5V external power supply.
GFN-VGA-145
GFN-VGA-145
Gefen 1:4 VGA Splitter
199.00
195.02
191.04
187.06
GFN-HDMI-141SB
GFN-HDMI-141SB
183.08
SVGA Video Extender, HD15 Male / Female
The CMSV601-D is used to amplify video signals from a VGA, SVGA, or multisync video cards. The unit has one HD15M plug for input and one HD15F
for output. It amplifies video signals with bandwidth up to 250 MHz to a maximum distance of 250 feet. Powered by a 9VDC power transformer (included).
The CMSV601-D supports screen resolutions of up to 1600 x 1200.
CMSV601-D
SVGA Video Extender, HD15 Male / Female
79.00
77.42
75.84
74.26
72.68
GFN-VGA-145
GFN-VGA-145
Covid 2-Port S-Video Splitter and Amplifier
The CVD9202 is a 1-in 2-out S-Video Distribution Amplifier. Each output is individually buffered producing excellent signal strength and quality. Built with
150 MHz of bandwidth, the CVD9202 provides unparalleled performance. The CVD9202 is ideal for applications where one NTSC, PAL or SECAM S-Video
signal, such as a VCR or Camera, needs to be distributed to two outputs. Buffered outputs along with high bandwidth also make the CVD9202 an excellent
line driver. Its powerful electrical performance creates strong video images over long cable runs (up to 500 feet) not possible with standard splitters.
CVD9202
2-Port S-Video Splitter and Amplifier
Tip
120.00
117.60
115.20
112.80
110.40
What bandwidth amplification do I need when splitting or extending my monitor?
This is a confusing question which the chart below should help answer.There are two factors that mainly affect bandwidth.First,the resolution at which the
monitor is to operate must be known (ex.1024 x 768).Second,what is the required refresh rate in Hz (ex.60 Hz),for acceptable display quality? Both settings
are typically user adjustable. Start by selecting the refresh rate and intersect with the proper resolution column.
CMSV601-D
Approximate Bandwidth Required (MHz)
Refresh
Rate
50 Hz
60 Hz
70 Hz
80 Hz
90 Hz
100 Hz
Item #
640 x 480
20 MHz
25 MHz
29 MHz
34 MHz
38 MHz
42 MHz
800 x 600
33 MHz
39 MHz
46 MHz
52 MHz
59 MHz
66 MHz
Resolution (Pixels)
1024 x 768
1280 x 1024
54 MHz
89 MHz
64 MHz
107 MHz
75 MHz
125 MHz
86 MHz
143 MHz
97 MHz
161 MHz
107 MHz
179 MHz
Description
1600 x 1280
140 MHz
168 MHz
196 MHz
224 MHz
252 MHz
280 MHz
1920 x 1440
189 MHz
226 MHz
264 MHz
302 MHz
340 MHz
377 MHz
CVD9202
UFMT1-TR
UFMT1-TR
(Transmitter)
List Price
Unicom Coaxial / Multimode Fiber Optic Video Converter - BNC and ST Ports
The UFMT1-TR is a video/fiber optic converter pair that transmits a video signal over a single multimode fiber optic cable. Accepts signal bandwidth to
8 MHz with transmission lengths to 2500 meters. Transmitter and receiver pair are sold as a kit. Each unit has single ST and BNC connectors and
measures 2.25 in. x 2.75 in. x 0.8 in. Powered by 9VDC power supplies which are included. 5 year manufacturer’s warranty.
UFMT1-TR
UFMT1-TR
Unicom Coaxial / Fiber Converter Pair
Shop at L-com.com or call 1-800-343-1455
E-mail: sales@L-com.com
Fax: 978-689-9484
469.00
UFMT1-TR
UFMT1-TR
(Receiver)
Same day shipping
Orders placed before 4:00 EST ship the same day.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising