Cisco MDS 9700 Series Supervisor 1E Data Sheet

Add to my manuals
9 Pages

advertisement

Cisco MDS 9700 Series Supervisor 1E Data Sheet | Manualzz

Data Sheet

Cisco MDS 9700 Series Supervisor 1E

Product Overview

The Cisco

®

MDS 9700 Series Supervisor 1E for heavier workloads delivers the latest advanced switching technology with proven Cisco NX-OS Software to power a new generation of scalable and intelligent multilayer switching solutions for SANs.

Designed to integrate multiprotocol switching and routing, intelligent SAN services, and storage applications onto highly scalable SAN switching platforms, the Cisco MDS 9700 Series Supervisor 1E for heavier workloads enables intelligent, resilient, scalable, and secure high-performance multilayer SAN switching solutions. The Cisco MDS

9000 Family lowers the total cost of ownership (TCO) for storage networking by combining robust and flexible hardware architecture, multiple layers of network and storage intelligence, and compatibility with all Cisco MDS

9000 Family switching modules.

This powerful combination helps organizations build highly available, scalable storage networks with comprehensive security and unified management. The Cisco MDS 9700 Series Supervisor 1E is supported on the

Cisco MDS 9718 Multilayer Director. Figure 1 shows the module.

Figure 1. Cisco MDS 9700 Series Supervisor 1E

© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 1 of 9

Main Features and Benefits

The Cisco MDS 9700 Series Supervisor 1E offers numerous benefits.

Industry-Leading Scalability

The module is designed to meet the requirements of the largest data center storage environments and combines industry-leading scalability and performance, intelligent SAN services, nondisruptive software upgrades, stateful process restart and failover, and fully redundant operation for a new standard in director-class SAN switching.

Integrated Performance

The combination of the Cisco MDS 9700 Series Supervisor 1E and the Cisco MDS 9700 48-Port 16-Gbps Fibre

Channel Switching Module and Cisco Fabric-1 crossbar switching modules enables up to 1.5 terabytes per second

(Tbps) of Fibre Channel throughput between modules in each direction for each payload slot in the Cisco MDS

9718 director. This per-slot bandwidth is twice the bandwidth needed to support a 48-port 16-Gbps Fibre Channel module at full line rate. The Cisco MDS 9718 architecture, based on central arbitration and crossbar fabric, provides 16-Gbps line-rate, nonblocking, predictable performance across all traffic conditions for every port in the chassis.

High Availability

The Cisco MDS 9700 Series Supervisor 1E and the Cisco MDS 9700 Series Multilayer Directors were designed from the beginning for high availability. In addition to meeting the basic requirement of nondisruptive software upgrades, the MDS 9700 Series software architecture offers availability. The Cisco MDS 9700 Series Supervisor

1E has the unique ability to automatically restart failed processes, making it exceptionally robust. In the rare event that a supervisor module is reset, complete synchronization between the active and standby supervisor modules helps ensure stateful failover with no disruption of traffic.

The MDS 9700 Series provides the industry’s first redundancy on all major hardware components, as detailed in

Table 1.

Table 1. Redundancy Details for Cisco MDS 9700 Series

Component

Supervisors

Power supplies

Fabrics

Redundancy

1+1 redundancy

Grid redundancy

N+1 redundancy

The Cisco MDS 9700 Series Supervisor 1E also provides Fabric Shortest Path First (FSPF)

–based multipathing to help ensure high availability at the fabric level. With the intelligence to load-balance across up to 16 equal-cost paths, the module can dynamically reroute traffic in the event of a switch failure. The module in combination with the Cisco MDS 9718 Director provides exceptional high availability, helping ensure that solutions exceed the

99.999 percent uptime requirements of today’s most demanding environments.

Lower Total Cost of Ownership

The Cisco MDS 9000 Family provides advanced management tools for overall low TCO. It supports Cisco virtual

SAN (VSAN) technology for hardware-enforced, isolated environments within a single physical fabric for secure sharing of physical infrastructure, further decreasing TCO.

© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 2 of 9

Comprehensive Security Framework

The Cisco MDS 9000 Family supports RADIUS and TACACS+, Fibre Channel Security Protocol (FC-SP)

1

, Secure

File Transfer Protocol (SFTP), Secure Shell (SSH) Protocol, and Simple Network Management Protocol Version 3

(SNMPv3) implementing Advanced Encryption Standard (AES), VSANs, hardware-enforced zoning, access control lists (ACLs), and per-VSAN role-based access control (RBAC).

Unified SAN Management

The Cisco MDS 9000 Family includes built-in storage network management, with all features available through a command-line interface (CLI) or Cisco Prime

Data Center Network Manager (DCNM), a centralized management tool that simplifies management of multiple switches and fabrics. Integration with third-party storage management platforms allows transparent interaction with existing management tools.

Intelligent Network Services

VSAN technology, ACLs for hardware-based intelligent frame processing, and fabricwide quality of service (QoS) enable migration from SAN islands to enterprisewide storage networks.

● Integrated hardware-based VSANs and Inter-VSAN Routing (IVR): Integration of VSANs into port-level hardware allows any port in a system or fabric to be partitioned to any VSAN. Integrated hardware-based

IVR provides line-rate routing between any ports in a system or fabric without the need for external routing appliances.

● Intelligent storage services: The Cisco MDS 9700 Series operates with intelligent service capabilities on other Cisco MDS 9000 Family platforms to provide services such as acceleration of storage applications for data replication and backup and data migration to hosts and targets attached to the Cisco MDS 9700 Series devices.

● Smart zoning: When the smart zoning feature is enabled, MDS 9700 Series fabrics provision the hardware access control entries specified by the zone set more efficiently, avoiding the superfluous entries that would allow servers (initiators) to talk to other servers or allow storage devices (targets) to talk to other storage devices. This feature makes larger zones with multiple initiators and multiple targets feasible without excessive consumption of hardware resources. Thus, smart zones can correspond to applications, application clusters, hypervisor clusters, or other data center entities, saving the time that administrators previously spent creating many small zones and enabling the automation of zoning tasks.

Advanced Diagnostics and Troubleshooting Tools

Management of large-scale storage networks requires proactive diagnostics, tools to verify connectivity and route latency, and mechanisms for capturing and analyzing traffic. The Cisco MDS 9000 Family integrates advanced, industry-leading analysis and debugging tools. The power-on self-test (POST) and online diagnostics provide proactive health monitoring. The Cisco MDS 9700 Series Supervisor 1E provides the integrated functions required to implement diagnostic capabilities such as Fibre Channel traceroute for identifying the exact path and timing of flows, and Cisco Switched Port Analyzer (SPAN) and Remote SPAN (RSPAN) to intelligently capture network traffic. After traffic has been captured, it can be analyzed with the Cisco Fabric Analyzer, an embedded Fibre

Channel analyzer.

The module also allows collection and management of comprehensive port-based and flow-based statistics, enabling sophisticated performance analysis and service-level agreement (SLA) accounting. The integrated Cisco

Call Home capability provides additional reliability and enables faster problem resolution and reduced service costs.

© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 3 of 9

Starting with Cisco MDS 9000 NX-OS Software 6.2, the powerful Cisco Generic Online Diagnostics (GOLD) framework replaces the Cisco Online Health Management System (OHMS) diagnostic framework on the new MDS

9700 Series Multilayer Director chassis. The Generic Online Diagnostics framework is a suite of diagnostic facilities for verifying that hardware and internal data paths are operating as designed. Boot-time diagnostics, continuous monitoring, standby fabric loopback tests, and on-demand and scheduled tests are part of the diagnostics feature set. This industry-leading diagnostics subsystem enables the rapid fault isolation and continuous system monitoring critical in today's continuously operating environments. With the MDS 9700 Series, Cisco delivers a comprehensive tool set for troubleshooting and analyzing an organization’s storage network.

Multiprotocol Intelligence

The multilayer architecture of the Cisco MDS 9700 Series enables a consistent feature set over a protocolindependent switch fabric. The Cisco MDS 9700 Series transparently integrates Fibre Channel, Fibre Channel over

Ethernet (FCoE), and IBM Fibre Connection (FICON).

● 2/4/8-Gbps, 4/8/16-Gbps, and 10-Gbps Fibre Channel and 10 Gigabit Ethernet: The Cisco MDS 9700

Series supports both 2/4/8/16-Gbps and 10-Gbps ports on the Cisco MDS 9700 48-Port 16-Gbps Fibre

Channel switching module. The MDS 9700 Series also supports 10 Gigabit Ethernet clocked optics carrying

10-Gbps Fibre Channel traffic.

● FICON: The Cisco MDS 9700 Series supports deployment in IBM System z FICON and Linux environments.

● Multihop FCoE: The Cisco MDS 9700 Series supports multihop FCoE, extending connectivity from FCoE and Fibre Channel fabrics to FCoE and Fibre Channel storage devices.

● USB ports: Two USB 2.0 ports are provided on the front panel for simplified configuration-file uploading and downloading using common USB memory-stick products.

Product Specifications

Table 2 lists the specifications of the Cisco MDS 9700 Series Supervisor 1E.

Table 2. Cisco MDS 9700 Series Supervisor 1E Module Specifications

Item

Processor

Number of cores

Speed

Kernel

Cisco NX-OS release

Memory

Cisco MDS 9700 Series Supervisor 1E Module

Intel

®

Xeon

®

processor

2 quad cores

2.13 GHz

64-bit

Cisco NX-OS Software Release 7.3 or later

32 GB (DDR3)

NVRAM 2-MB battery backup

Not supported Connectivity management processor (CMP)

Flash memory

Removable storage

USB flash memory

2 external USB memory slots:

● Slot 0

● USB 1

© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 4 of 9

Table 3 lists the product specifications for the Cisco MDS 9700 Series Supervisor 1E Module.

Table 3. Cisco MDS 9700 Series Supervisor 1E Module Product Specifications

Feature Description

Product compatibility Cisco MDS 9718 Multilayer Director

Software compatibility Cisco MDS SAN-OS Software Release 7.3 or later

Interfaces

Indicators

Switching bandwidth

● 1 RS-232 RJ-45 console port

● 1 10/100/1000 Ethernet management port

● 2 USB 2.0 ports

● Supervisor ID LED

● Supervisor status LED

● System status LED

● Active supervisor LED

● Power management LED

● 10/100/1000 management port activity LED

● Log flash-memory activity LED

● Slot 0 activity LED

● Front-panel Fibre Channel system bandwidth:

Up to 48 Tbps in a single Cisco MDS 9718 chassis

● Up to 768 2/4/8-Gbps, 4/8/16-Gbps, or 10-Gbps full line-rate autosensing Fibre Channel ports or 10-Gbps FCoE or

368 40-Gbps FCOE in a single Cisco MDS 9718 chassis

Protocols

● Fibre Channel standards

● FC-PH, Revision 4.3 (ANSI INCITS 230-1994)

● FC-PH, Amendment 1 (ANSI INCITS 230-1994/AM1-1996)

● FC-PH, Amendment 2 (ANSI INCITS 230-1994/AM2-1999)

● FC-PH-2, Revision 7.4 (ANSI INCITS 297-1997)

● FC-PH-3, Revision 9.4 (ANSI INCITS 303-1998)

● FC-PI, Revision 13 (ANSI INCITS 352-2002)

● FC-PI-2, Revision 10 (ANSI INCITS 404-2006)

● FC-PI-3, Revision 4 (ANSI INCITS 460-2011)

● FC-PI-4, Revision 8 (ANSI INCITS 450-2008)

● FC-PI-5, Revision 6 (ANSI INCITS 479-2011)

● FC-FS, Revision 1.9 (ANSI INCITS 373-2003)

● FC-FS-2, Revision 1.01 (ANSI INCITS 424-2007)

● FC-FS-2, Amendment 1 (ANSI INCITS 424-2007/AM1-2007)

● FC-FS-3, Revision 1.11 (ANSI INCITS 470-2011)

● FC-LS, Revision 1.62 (ANSI INCITS 433-2007)

● FC-LS-2, Revision 2.21 (ANSI INCITS 477-2011)

● FC-SW-2, Revision 5.3 (ANSI INCITS 355-2001)

● FC-SW-3, Revision 6.6 (ANSI INCITS 384-2004)

● FC-SW-4, Revision 7.5 (ANSI INCITS 418-2006)

● FC-SW-5, Revision 8.5 (ANSI INCITS 461-2010)

● FC-GS-3, Revision 7.01 (ANSI INCITS 348-2001)

● FC-GS-4, Revision 7.91 (ANSI INCITS 387-2004)

● FC-GS-5, Revision 8.51 (ANSI INCITS 427-2007)

● FC-GS-6, Revision 9.4 (ANSI INCITS 463-2010)

● FCP, Revision 12 (ANSI INCITS 269-1996)

● FCP-2, Revision 8 (ANSI INCITS 350-2003)

● FCP-3, Revision 4 (ANSI INCITS 416-2006)

● FCP-4, Revision 2b (ANSI INCITS 481-2011)

● FC-SB-2, Revision 2.1 (ANSI INCITS 349-2001)

● FC-SB-3, Revision 1.6 (ANSI INCITS 374-2003)

● FC-SB-3, Amendment 1 (ANSI INCITS 374-2003/AM1-2007)

● FC-SB-4, Revision 3.0 (ANSI INCITS 466-2011)

● FC-SB-5, Revision 2.00 (ANSI INCITS 485-2014)

© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 5 of 9

Feature Description

● FC-BB-6, Revision 2.00 (ANSI INCITS 509-2014)

● FC-BB-2, Revision 6.0 (ANSI INCITS 372-2003)

● FC-BB-3, Revision 6.8 (ANSI INCITS 414-2006)

● FC-BB-4, Revision 2.7 (ANSI INCITS 419-2008)

● FC-BB-5, Revision 2.0 (ANSI INCITS 462-2010)

● FC-VI, Revision 1.84 (ANSI INCITS 357-2002)

● FC-SP, Revision 1.8 (ANSI INCITS 426-2007)

● FC-SP-2, Revision 2.71 (ANSI INCITS 496-2012)

● FAIS, Revision 1.03 (ANSI INCITS 432-2007)

● FAIS-2, Revision 2.23 (ANSI INCITS 449-2008)

● FC-IFR, Revision 1.06 (ANSI INCITS 475-2011)

● FC-FLA, Revision 2.7 (INCITS TR-20-1998)

● FC-PLDA, Revision 2.1 (INCITS TR-19-1998)

● FC-Tape, Revision 1.17 (INCITS TR-24-1999)

● FC-MI, Revision 1.92 (INCITS TR-30-2002)

● FC-MI-2, Revision 2.6 (INCITS TR-39-2005)

● FC-MI-3, Revision 1.03 (INCITS TR-48-2012)

● FC-DA, Revision 3.1 (INCITS TR-36-2004)

● FC-DA-2, Revision 1.06 (INCITS TR-49-2012)

● FC-MSQS, Revision 3.2 (INCITS TR-46-2011)

● IP over Fibre Channel (RFC 2625)

● IPv6, IPv4, and Address Resolution Protocol (ARP) over Fibre Channel (RFC 4338)

● Extensive IETF-standards-based TCP/IP, SNMPv3, and remote monitoring (RMON) MIBs

● Class of Service: Class 2, Class 3, and Class F

● Fibre Channel standard port types: E, F, FL, and B

● Fibre Channel enhanced port types: SD, ST, and TE

● 2 Cisco MDS 9700 Series Supervisor 1E Modules required per system to provide redundancy

Chassis slot configuration

Features and Functions

Fabric services

Advanced functions

Diagnostics and troubleshooting tools

● Name server

● Registered State Change Notification (RSCN)

● Login services

● Fabric configuration server (FCS)

● Broadcast

● In-order delivery

● VSAN

● IVR

● Port Channel with multipath load balancing

● QoS: flow based and zone based

● N-Port ID virtualization

● POST diagnostics

● Online diagnostics

● Internal port loopbacks

● SPAN and RSPAN

● Fibre Channel traceroute

● Fibre Channel ping

● Fibre Channel debug

● Cisco Fabric Analyzer

● Syslog

● Online system health

● Port-level statistics

● Real-Time Protocol (RTP) debug

© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 6 of 9

Feature

Network security

Serviceability

Reliability and availability

Network management

Description

● VSANs

● ACLs

● Per-VSAN RBAC

● Fibre Channel zoning

N-Port World Wide Name (WWN)

N-Port FC-ID

Fx-Port WWN

Fx-Port WWN and interface index

Fx-Port domain ID and interface index

Fx-Port domain ID and port number

Logical Unit Number (LUN)

Read -only

Broadcast

● FC-SP 1

DH-CHAP switch-switch authentication

DH-CHAP host-switch authentication

● Port security and fabric binding

● Management access

SSHv2 implementing AES

SNMPv3 implementing AES

SFTP

● Cisco TrustSec ® 1

Fibre Channel link encryption

● Configuration file management

● Nondisruptive software upgrades for Fibre Channel interfaces

● Cisco Call Home

● Power-management LEDs

● Port beaconing

● System LED

● SNMP traps for alerts

● Network boot

● Hot-swappable module

● Active-active redundancy

● Stateful process restart

● Stateful, nondisruptive supervisor failover

● Online, nondisruptive software upgrades

● Virtual Routing Redundancy Protocol (VRRP) for management

● Per-VSAN fabric services

● Power management

● Thermal management

● Fabric-based multipathing

● Access methods through Cisco MDS 9700 Series Supervisor 1E

Out-of-band 10/100/1000 Ethernet port

RS-232 serial console port

In-band IP over Fibre Channel

● Access methods through MDS 9700 Series Fibre Channel switching module

In-band FICON control unit port (CUP) over any System Z FICON channel

● Access protocols

CLI using console and Ethernet ports

SNMPv3 -using Ethernet port and in-band IP over Fibre Channel access

FICON CUP

● Distributed Device Alias service

● Network security

Per-VSAN RBAC using RADIUS- and TACACS+-based authentication, authorization, and accounting (AAA) functions

SFTP

© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 7 of 9

Feature

Programming interface

Description

SSHv2 implementing AES

SNMPv3 implementing AES

● Management applications

Cisco MDS 9000 Family CLI

Cisco Prime DCNM GUI

● REST API based Cisco NX-API

● Scriptable CLI

● Cisco Prime DCNM web services API

● Cisco Prime DCNM GUI

Environmental

Physical dimensions

Weight

Approvals and compliance

● Temperature, ambient operating: 32 to 104°F (0 to 40°C)

● Temperature, ambient nonoperating and storage: -40 to 158°F (-40 to 70°C)

● Relative humidity, ambient (noncondensing) operating: 10 to 90%

● Relative humidity, ambient (noncondensing) nonoperating and storage: 10 to 95%

● Altitude, operating: -197 to 6500 ft (-60 to 2000m)

● H x W x D: 2.04 x 7.94 x 21.85 in. (5.18 x 20.17 x 55.5 cm)

● 8.5 lb (3.86 kg)

● Safety compliance

CE Marking

UL 60950

CAN/CSA-C22.2 No. 60950

EN 60950

IEC 60950

AS/NZS 3260

IEC60825

EN60825

21 CFR 1040

● EMC compliance

FCC Part 15 (CFR 47) Class A

ICES-003 Class A

EN 55022 Class A

CISPR 22 Class A

AS/NZS 3548 Class A

VCCI Class A

EN 55024

EN 50082-1

EN 61000-6-1

EN 61000-3-2

EN 61000-3-3

Ordering Information

Table 4 provides ordering information for the Cisco MDS 9700 Series Supervisor 1E Module.

Table 4. Cisco MDS 9700 Series Supervisor 1E Module Ordering Information

Part Number Product Description

Cisco MDS 9718 Series Component

DS-C9718

DS-X97-SF1E-K9

MDS 9718 Chassis, No Power Supplies, Fans Included

Cisco MDS 9700 Series Supervisor 1E

Licensed Software

M97ENTK9

DCNM-SAN-M97-K9

M97FIC1K9

Enterprise package license for 1 MDS9700 switch

DCNM for SAN License for MDS 9700

Mainframe package license for 1 MDS9700 switch

© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 8 of 9

Part Number

Spare Component

DS-C9718=

DS-X97-SF1E-K9=

Licensed Software

M97ENTK9=

L-M97ENTK9=

DCNM-SAN-M97-K9=

L-DCNM-S-M97-K9=

M97FIC1K9=

L-M97FIC1K9=

Product Description

MDS 9718 Chassis, Spare, No Power Supplies, Fans Included

MDS 9700 Series Supervisor-1E

Enterprise package license for 1 MDS9700 switch

E-delivery Enterprise package license for 1 MDS9700 switch

DCNM for SAN License for MDS 9700

E-delivery DCNM for SAN Package Advanced Edition for MDS 9700

Mainframe package license for 1 MDS9700 switch

E-delivery Mainframe package license for 1 MDS9700 switch

Cisco Capital

Financing to Help You Achieve Your Objectives

Cisco Capital can help you acquire the technology you need to achieve your objectives and stay competitive. We can help you reduce CapEx. Accelerate your growth. Optimize your investment dollars and ROI. Cisco Capital financing gives you flexibility in acquiring hardware, software, services, and complementary third-party equipment.

And there’s just one predictable payment. Cisco Capital is available in more than 100 countries. Learn more .

For More Information

For more information about the Cisco MDS 9700 Series, visit http://www.cisco.com/go/storage or contact your local account representative.

Printed in USA

© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.

C78-736317-00 01/16

Page 9 of 9

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement