PowerLite

®

Presenter L

Quick Setup

Before using the projector, make sure you read the safety instructions in the on-screen User’s Guide.

Play a DVD

1

Plug in the projector. The power light on the projector turns orange.

Other Connections

Connect up to 3 video devices and use the remote control to switch between them. You can also connect a microphone or USB thumb drive.

HDMI cable

(optional)

RCA video cable

(composite video)

(optional)

Audio cable

(optional)

Component video cable

(optional)

2

Insert your DVD into the slot. The projector will power on automatically.

3

Open the lens cover slide all the way. Your movie will be displayed.

See “Adjust the image” for more information.

Connect the projector

Choose from the following connections:

Computer Monitor Port

Connect a computer using a VGA cable (optional).

PC port

4

Press the power button on the projector or remote control.

Power light and button

Using the remote control

Make sure the batteries are installed as shown (two AA batteries included).

Microphone

3

Open the lens cover slide all the way.

USB thumb drive

Turn on your equipment

NOTE: If you’re playing a DVD, see “Play a DVD” instead.

1

Turn on your computer or video source.

2

Plug in the projector. The power light on the projector turns orange.

Turn projector on and off

Project from external equipment

Function/numerics toggle switch

Eject DVD

Adjust picture for different lighting

Pause movie and turn on light

Control playback

The projector beeps, the warms up. When the to use.

power light flashes green, and the projector power light stays green, the projector is ready

5

The default language of the menu system is English. To change the language, press the Menu button on the projector or the remote control.

Select Extended and press Enter, then select Language and press Enter.

Choose your language and press Enter. Press Esc or Menu to exit.

Adjust the image

1

If you don’t see an image, press the Source button (remote control) or

Source Search button (projector) to select the image source.

NOTE: If you still see a blank screen or have other display problems, see

the on-screen User’s Guide.

2

To raise the image, press the foot adjustment levers and lift the front of the projector. Release the levers to lock the feet in position. If the image is horizontally tilted, you can turn the feet to level it.

3

To reduce or enlarge the image, press the Visual Setup button, select

Signal, and press Enter. Press the up or down arrow buttons until you see the Zoom menu, then press the left or right arrow buttons to change the image size.

4

Turn the focus ring to sharpen the image.

5

If your image looks like or , you’ve placed the projector off to one side of the screen at an angle. Place it directly in front of the center of the screen, facing the screen squarely.

6

If your image looks like or , press the or Keystone buttons on the remote control to correct it.

Fix image shape

(if the projector is tilted)

Control volume

Access DVD features

For more information on using the remote control, see your on-screen

User’s Guide.

Where to get help

Manual

For more information about using the projector, install the User’s Guide from your projector CD.

Telephone Support Services

You may speak with a projector support specialist by dialing:

Country Telephone Number Country

Argentina (54 11) 5167-0300 Mexico

Brazil

Chile

(55 11) 3956-6868

(56 2) 230-9500

Telephone Number

Mexico City (52 55) 1323-2052

Other cities 01-800-087-1080

Colombia (57 1) 523-5000

Costa Rica (50 6) 2210-9555

800-377-6627

Peru

Venezuela

(51 1) 418-0210

(58 212) 240-1111

If your country does not appear in the list, contact the Epson sales office of the nearest country. Toll or long distance charges may apply.

Internet Support

Visit www.latin.epson.com for solutions to common problems. You can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail Epson with your questions.

If you are using a notebook, switch it to external display. If you’re using a

PC notebook, hold down the Fn key on the keyboard and press the function key that lets you display on an external monitor. It may have an icon such as

, or it may be labelled CRT/LCD. Allow a few seconds for the projector to sync up after pressing it. Check your notebook’s manual or online help for details. You can also connect an audio cable.

Epson is a registered trademark and Epson Exceed Your Vision is a registered logomark of Seiko Epson

Corporation.

General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks.

This information is subject to change without notice.

© 2010 Epson America, Inc. 7/10

Printed in XXXXXX CPD-28136

PowerLite

®

Presenter L

Quick Setup

Before using the projector, make sure you read the safety instructions in the on-screen User’s Guide.

Play a DVD

1

Plug in the projector. The power light on the projector turns orange.

Other Connections

Connect up to 3 video devices and use the remote control to switch between them. You can also connect a microphone or USB thumb drive.

HDMI cable

(optional)

RCA video cable

(composite video)

(optional)

Audio cable

(optional)

Component video cable

(optional)

2

Insert your DVD into the slot. The projector will power on automatically.

3

Open the lens cover slide all the way. Your movie will be displayed.

See “Adjust the image” for more information.

Connect the projector

Choose from the following connections:

Computer Monitor Port

Connect a computer using a VGA cable (optional).

PC port

4

Press the power button on the projector or remote control.

Power light and button

Using the remote control

Make sure the batteries are installed as shown (two AA batteries included).

Microphone

3

Open the lens cover slide all the way.

USB thumb drive

Turn on your equipment

NOTE: If you’re playing a DVD, see “Play a DVD” instead.

1

Turn on your computer or video source.

2

Plug in the projector. The power light on the projector turns orange.

Turn projector on and off

Project from external equipment

Function/numerics toggle switch

Eject DVD

Adjust picture for different lighting

Pause movie and turn on light

Control playback

The projector beeps, the warms up. When the to use.

power light flashes green, and the projector power light stays green, the projector is ready

5

The default language of the menu system is English. To change the language, press the Menu button on the projector or the remote control.

Select Extended and press Enter, then select Language and press Enter.

Choose your language and press Enter. Press Esc or Menu to exit.

Adjust the image

1

If you don’t see an image, press the Source button (remote control) or

Source Search button (projector) to select the image source.

NOTE: If you still see a blank screen or have other display problems, see

the on-screen User’s Guide.

2

To raise the image, press the foot adjustment levers and lift the front of the projector. Release the levers to lock the feet in position. If the image is horizontally tilted, you can turn the feet to level it.

3

To reduce or enlarge the image, press the Visual Setup button, select

Signal, and press Enter. Press the up or down arrow buttons until you see the Zoom menu, then press the left or right arrow buttons to change the image size.

4

Turn the focus ring to sharpen the image.

5

If your image looks like or , you’ve placed the projector off to one side of the screen at an angle. Place it directly in front of the center of the screen, facing the screen squarely.

6

If your image looks like or , press the or Keystone buttons on the remote control to correct it.

Fix image shape

(if the projector is tilted)

Control volume

Access DVD features

For more information on using the remote control, see your on-screen

User’s Guide.

Where to get help

Manual

For more information about using the projector, install the User’s Guide from your projector CD.

Telephone Support Services

You may speak with a projector support specialist by dialing:

Country Telephone Number Country

Argentina (54 11) 5167-0300 Mexico

Brazil

Chile

(55 11) 3956-6868

(56 2) 230-9500

Telephone Number

Mexico City (52 55) 1323-2052

Other cities 01-800-087-1080

Colombia (57 1) 523-5000

Costa Rica (50 6) 2210-9555

800-377-6627

Peru

Venezuela

(51 1) 418-0210

(58 212) 240-1111

If your country does not appear in the list, contact the Epson sales office of the nearest country. Toll or long distance charges may apply.

Internet Support

Visit www.latin.epson.com for solutions to common problems. You can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail Epson with your questions.

If you are using a notebook, switch it to external display. If you’re using a

PC notebook, hold down the Fn key on the keyboard and press the function key that lets you display on an external monitor. It may have an icon such as

, or it may be labelled CRT/LCD. Allow a few seconds for the projector to sync up after pressing it. Check your notebook’s manual or online help for details. You can also connect an audio cable.

Epson is a registered trademark and Epson Exceed Your Vision is a registered logomark of Seiko Epson

Corporation.

General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks.

This information is subject to change without notice.

© 2010 Epson America, Inc. 7/10

Printed in XXXXXX CPD-28136