Klipsch CS 700 home cinema systems Owner's Manual

CS-700
Owner's Manual
Table of Contents
Chapter 1: Connecting Your System
Chapter 4: Menu System
Reading this Manual.......................................................................1
On screen menu system............................................................... 20
Step-by-Step Connections..............................................................1
Navigating menus......................................................................... 20
Step 1: Unpack the box...................................................................2
On-screen menus..........................................................................21
Step 2: Put the batteries in the remote control..............................2
Audio......................................................................................21
Step 3A: Set-top box connection....................................................3
Setup.....................................................................................21
Step 3B: TV audio connection.........................................................4
Languages..............................................................................21
Step 4: Connect Klipsch System to the TV's Input..........................5
Parental control.................................................................... 22
Step 5: Connect the speakers.........................................................6
Remote control..................................................................... 22
Speaker Setup Considerations.................................................6
Step 6: Connect other components (OPTIONAL)............................7
Chapter 5: Troubleshooting
Step 7: Connect AM and FM antennas............................................8
General problems.................................................................. 23
Step 8: Turn on the TV and the Klipsch system...............................8
Video problems..................................................................... 23
Step 9: Complete the on-screen setup...........................................9
Audio problems..................................................................... 23
Your Klipsch Controller..................................................................11
Remote control problems...................................................... 23
Buttons..................................................................................11
Playback problems................................................................ 23
Display...................................................................................11
Radio problems..................................................................... 23
The basics.................................................................................... 12
Switching between media—
TV, DVD, Radio, CD, etc......................................................... 12
Chapter 2: Remote Control
Buttons......................................................................................... 13
Programming your remote control................................................ 14
Chapter 3: Operation
Compatible discs......................................................................... 15
Incompatible discs....................................................................... 15
Regional coding............................................................................ 15
Playing a disc............................................................................... 15
DVD and VCD playback.................................................................16
Transport................................................................................16
Navigating info banners................................................................17
Playing CDs.................................................................................. 18
Playing CDs with mp3 or JPEG files.............................................. 19
Playing the radio.......................................................................... 19
Setting up presets................................................................ 19
On screen info banner.................................................................. 19
Chapter 6: Care and Maintenance
Klipsch System..................................................................... 24
Cleaning................................................................................ 24
Handling and Caring for Discs............................................... 24
Remote Control Codes.......................................................... 25
Warranty................................................................................ 27
FCC Information.................................................................... 27
Appendix I
Connection Overview.................................................................... 28
Input jacks............................................................................ 28
Output jacks.......................................................................... 28
Audio connection options..................................................... 28
Video connection options..................................................... 28
Index page i/ii
Important Safety Information
1.
2.
3.
4.
5.
6.
7.
READ these instructions.
KEEP these instructions.
HEED all warnings.
FOLLOW all instructions.
DO NOT use this apparatus near water.
CLEAN ONLY with dry cloth.
DO NOT block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
WARNING: To reduce the risk of fire or electrical shock, do not expose this apparatus to
rain or moisture.
WARNING: Batteries (battery pack or batteries installed) shall not be exposed to
excessive heat such as sunshine, fire or the like.
WARNING: No naked flame sources – such as candles – should be placed on
the product.
8. DO NOT install near any heat sources such as radiators, heat registers,
WARNING
stoves, or other apparatus (including amplifiers) that produce heat.
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
9. DO NOT defeat the safety purpose of the polarized or grounding type
plug. A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The
wider blade or the third prong is provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of
the obsolete outlet.
10. PROTECT the power cord from being walked on or pinched, particularly
at plugs, convenience receptacles, and the point where they exit from
the apparatus.
11. ONLY USE attachments/accessories specified by the manufacturer.
12. USE only with a cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart
is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13. UNPLUG this apparatus during lightning storms or when
unused for long periods of time.
14. REFER all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled, objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
For Your Safety: The AC power plug is polarized (one blade is
wider than the other) and only fits into an AC power outlet one
way. If the plug won’t go into the outlet completely, turn the plug
over and try to insert it the other way. If it still won’t fit, contact a
qualified electrician to change the outlet, or use a different one.
Do not attempt to bypass this safety feature.
15. DO NOT expose this apparatus to dripping or splashing and ensure
that no objects filled with liquids, such as vases, are placed on the
apparatus.
16. To completely disconnect this apparatus from the AC Mains, disconnect
the power supply cord plug from the AC receptacle.
17. The mains plug of the power supply cord shall remain readily operable.
The exclamation point, within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the product.
The lightning flash with arrowhead symbol within an equilateral triangle,
is intended to alert the user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electrical shock to persons.
WARNING: Do Not Open! Risk of Electrical Shock. Voltages in this equipment
are hazardous to life. No user-serviceable parts inside. Refer all servicing to
qualified service personnel.
WARNING: This product is intended to be operated ONLY from the AC Voltages listed on the
back panel or included power supply of the product. Operation from voltages other than those
indicated may cause irreversible damage to the product and void the product's warranty. The
use of AC Plug Adapters is cautioned because it can allow the product to be plugged into
voltages in which the product was not designed to operate. If the product is equipped with a
detachable power cord, use only the type provided with your product or by your local distributor
and/or retailer. If you are unsure of the correct operational voltage, please contact your local
distributor and/or retailer.
CAUTION: Place the equipment near a main power supply outlet and make sure that you can
easily access the power breaker switch.
NOTE: If the AC mains connection provides a third prong for ground (Class 1 devices), the
device shall be connected to a main socket outlet with a protective earthing connection.
NOTE: If a DVD is present, the following laser safety statement applies:
LASER SAFETY: This unit employs a laser. Due to possible eye injury, only a qualified
service person should remove the cover or attempt to service this device.
CAUTION: Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
This device is protected by U.S. patent numbers 4,631,603 and 4,577,216 and 4,819,098 and
4,907,093 and other intellectual property rights.
DVD Safety Information
This DVD player is designed and manufactured to respond to the Region Management Information. If the
region number of a DVD disc does not correspond to the region number of this DVD player, this player
cannot play the disc. The region number for this DVD player is Region No 1.
DVD Copy Protection
In accordance with the DVD standard, your DVD player is equipped with a Copy Protection System,
which can be switched on and off by the DVD disc itself, in order to make any recording of the relevant
DVD disc onto a videotape of very poor picture quality, or even impossible. This product incorporates
copyright protection technology that is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this
copyright protection technology must be authorized by Macrovision Corporation, and is intended
for home use only unless otherwise authorized by Macrovision Corporation. Reverse engineering or
disassembly is prohibited. This DVD player does not play discs that are pirated. The unauthorized use
and recording of copyright and patented material is considered piracy.
Thank You
Thank you for purchasing the Klipsch CS-700 System. After reading this
manual and connecting your system, you will hear the results of more than 60
years of stringent engineering and class-leading research and development.
Like all Klipsch products, your Klipsch CS-700 features Klipsch Tractrix® Hornloaded technology—the guiding design for the first Klipschorn® developed in
1946 and every product that has followed. Horn-loading allows your speakers
to deliver high sensitivity, low distortion, flat frequency response and wide
dispersion, which translates to unequaled power, detail, and dynamics: the
hallmark of the “Klipsch Sound.” Please be sure to return the enclosed product
registration card or register your product at www.klipsch.com so we are better
able to serve you. Again, thank you for choosing Klipsch and we hope that your
Klipsch CS-700 brings life to your music and movies for many years.
Reading this Manual
This manual uses different style conventions and typefaces to distinguish them from the body text. Throughout the manual, the following conventions are used:
Text
Example
Button names on the remote and unit appear in ALL
CAPS, BOLD.
DISC, AUX 1, SAT/CAB, GUIDE, INFO, DVD MENU
On-screen menus appear in Bold, Italics.
Audio, Setup, Languages, Parental Control
Input and output jack names appear in ALL CAPS.
AUX 1 INPUT, VIDEO OUTPUT, COMPONENT
Black bar sections provide technical information.
Input and Output Jacks
Chapter 1: Connecting your system
Step-by-Step Connections
This chapter is divided into steps to get you up and running as quickly as possible. Because TVs have so many different options these days, several
connection scenarios are provided. Below is a summary of the steps you will take to get connected.
Step 1: Unpack the box
Page 2
Step 2: Put batteries in the remote control
Page 2
Step 3: Connect TV signal output to Klipsch input
3A: Set-top box Connection
Use this connection if your TV has a cable box, satellite receiver, or HD Receiver set-top box connected to it
Page 3
3B: TV Audio Connection
Use this connection if you receive your TV signal via regular cable (no cable box) or an off-air antenna
Page 4
Step 4: Connect Klipsch system to TV’s Video Input
Page 5
Step 5: Connect the speakers Page 6
Step 6: Connect other components
Page 7
Step 7: Connect AM and FM antennas
Page 8
Step 8: Turn on TV and Klipsch system
Page 8
Step 9: Complete the on-screen setup
Page 9
ConneCtIons page 1/2
STeP 1: unpack the box
Make sure you have the following items as you unpack your Klipsch system.
0
0
0
Controller
Subwoofer
Left/Right Speakers
0
0
Remote Control
0
0
AM Antenna
2 20-Ft. Left/Right
Speaker Cables
Subwoofer
Power Cable
Owner’s Manual
0
Left/Right Audio Cable
(Red and White)
0
0
0
Setup Guide
0
Composite Video
Cable (Yellow)
2 AA Remote Batteries
0
0
FM Antenna
0
Mini plug to
RCA Adapter
Rubber Pads
Step 2: Put the batteries in the remote control
1. Locate supplied remote control and batteries.
2. Remove the battery compartment cover on the back of the remote. Push down on the
tab and lift the cover.
3. Insert the two (2) “AA” batteries. Make sure the polarities (+ and -) are aligned
correctly with the polarities inside the remote.
4. Replace the cover.
STEP 3A: Set-Top Box Connection
Use this connection if your TV has a cable box, satellite receiver or HD receiver set-top box connected to it.
See next page (3B) if no set-top box is used.
CABLE SIGNAL
CABLE BOX (shown)
CABLE IN
OUTPUTS
HDMI OUT
COMPONENT
PB P R
Y
VIDEO
AUDIO
L
R
S-VIDEO
- OR 2A
2B
KLIPSCH CONTROLLER
1. Disconnect the cable on your cable, satellite or HD set-top box that is
connected to your TV (you need to connect 1 video and 1 audio).
2. Connect the VIDEO—look at the options available on the set-top box
and choose 2A or 2B.
A. To maintain best picture quality—if the back of the set-top box
has any COMPONENT VIDEO (Y, PB, PR) OUTPUT jacks, plug
corresponding cable(s) into the jack(s) on the set-top box and to
the Klipsch CS700’S SAT/CBL/HD INPUT COMPONENT
jacks (Y to Y; PB to PB, PR to PR ). If you use 2A, you must
also connect the corresponding output from the Klipsch controller’s
“VIDEO OUTPUT” section to your TV to ensure that you get a picture.
These cables have not been included with the Klipsch system.
When using the HDMI connection you must turn Progressive Scan
(P. SCAN) “On”. If the HDMI connection are used and P. SCAN
is “Off”, you will not see a picture.
B. If the set-top box has a VIDEO (yellow) OUTPUT jack for video, plug
the supplied yellow video cable into that jack and to the Klipsch
system’s SAT/CABLE/HD INPUT COMPOSITE (yellow) jack.
DIGITAL
COAXIAL OPTICAL
- OR 3A
3B
3C
- OR -
3. Connect the AUDIO—look at the options available on the set-top box
and choose 3A, 3B, 3C.
A. Connect the supplied audio cables to the AUDIO LEFT (white) and
AUDIO R IGHT (red) jacks on the back of the set-top box and to the
Klipsch system’s SAT/CABLE/HD INPUT LEFT (white) and RIGHT
(red) jacks.
B. If the set-top box has Digital AUDIO (COAXIAL), connect appropriate cable to the set-top box AUDIO COAXIAL jack and to the
SAT/CABLE/HD INPUT COAXIAL jack.
C. If the set-top box has Digital AUDIO (OPTICAL), connect appropriate
cable (not supplied) to the Klipsch System’s SAT/CABLE/HD INPUT
OPTICAL jack. You will first need to remove the plastic dust plug.
Note: If you connect a high definition Y, P B, PR INPUT, you must also
connect the corresponding Y, PB, PR OUTPUT to your TV. If you connect
HDMI, you must also connect the corresponding output from the Klipsch
controller’s “VIDEO OUTPUT” section to your TV to ensure that you get a
picture. These cables have not been included with the Klipsch system.
Input and Output Jacks
Please see appendix I (page 28) for the basics on how input
and output jacks work with your Klipsch system.
CONNECTIONS page 3/4
STEP 3B: TV Audio Connection
Use this connection if you receive your TV signal via regular cable (no cable box) or with an off-air antenna.
TV BACK PANEL
COMPOSITE
COMPONENT
COMPONENT
AUDIO / VIDEO
OUTPUT
OUTPUT
INPUT 1
INPUT 2
INPUT 3
INPUT 4
R
R
Y
Y
Y
R
L
L
PB
PB
PB
L
V
V
PR
PR
PR
V
S-VIDEO
S-VIDEO
DIGITAL COAXIAL
OUTPUT
ANTENNA A ANTENNA B
INPUT
INPU T
DIGITAL OPTICAL
OUTPUT
CABLE OR
OFF-AIR
ANTENNA
1B
- OR -
1C
- OR -
1A
KLIPSCH CONTROLLER
If you don't have a set-top box connected to your TV (you either have cable
coming out of the wall or an off-air antenna, such as HD), simply connect
the Audio OUTPUT jacks on the TV to the AUDIO INPUT jacks on the Klipsch
system. If you want the TV sound to come through the Klipsch system, you
need to make this audio connection.
1. Choose the best TV AUDIO connection available (1A, 1B, or 1C).
A. If your TV doesn’t have DIGITAL OPTICAL or DIGITAL COAXIAL
for the audio connection, connect standard audio cables (you can
use the supplied cables for this if you have not already used them)
to the AUDIO LEFT (white) and AUDIO RIGHT (red) OUTPUT jacks
on the back of your TV and to the Klipsch system’s SAT/CAB/HD
INPUT jacks that are labeled L and R.
B. If your TV has a DIGITAL AUDIO (COAXIAL) OUTPUT jack, connect
appropriate cable (not supplied) to the TV’s AUDIO COAXIAL
OUTPUT jack and to the Klipsch System’s SAT/CAB/HD INPUT
COAXIAL jack.
C. If your TV has a DIGITAL AUDIO (OPTICAL) OUTPUT jack, connect
appropriate cable (not supplied) to it and the other end to the
Klipsch System’s SAT/CAB/HD INPUT OPTICAL jack.
2. Make note of which AUDIO INPUT you used (SAT/CAB, AUX 1, AUX 2),
as you will need to enter the correct AUDIO INPUT setting during the
on-screen setup procedure in Step 9.
Input and Output Jacks
Please see appendix I (page 28) for the basics on how input
and output jacks work with your Klipsch system.
STEP 4: Connect Klipsch System to the TV's Input
TV BACK PANEL
COMPOSITE
COMPONENT
COMPONENT
AUDIO / VIDEO
OUTPUT
OUTPUT
INPUT 1
INPUT 2
INPUT 3
INPUT 4
R
R
Y
Y
Y
R
L
L
PB
PB
PB
L
V
V
PR
PR
PR
V
S-VIDEO
1
- OR -
DIGITAL COAXIAL
OUTPUT
2
3
OR
DIGITAL OPTICAL
OUTPUT
OR
ANTENNA A
INPUT
ANTENNA B
INPUT
HDMI
INPUT
4
5
KLIPSCH CONTROLLER
1. If your TV doesn’t have HDMI or COMPONENT, but has S-VIDEO,
connect S-VIDEO cable (not supplied) to the Klipsch system’s VIDEO
OUTPUT S-VIDEO jack and to the corresponding S-VIDEO jack on the TV.
2. If your TV has COMPONENT INPUT jacks (Y, PB, PR ) connect the (not
supplied) corresponding cables (either bundled or three separate
video grade cables—yellow) to the Klipsch system’s VIDEO OUTPUT
COMPONENT Y, PB, PR jacks and to the corresponding input jacks on
the TV. To use this option, you must also connect the corresponding Y,
PB, PR OUTPUT to your TV.
3. If your TV doesn’t have COMPONENT or S-VIDEO, connect the TV’s
VIDEO INPUT (yellow) to the Klipsch system’s COMPOSITE jack (yellow)
with the supplied cable.
4. If your TV has an HDMI INPUT, connect the corresponding HDMI cable
(not supplied) from the HDMI OUTPUT of the Klipsch system to the
HDMI INPUT of the TV.
5. If you’re using COMPONENT jacks or HDMI and your TV supports
progressive scanning technology (see the TV owner’s manual if you
don’t know whether your TV is a progressive scan TV), slide the
P.SCAN switch on the back of your Klipsch system to the ON position.
If you put the P.SCAN switch in the ON position and your TV doesn’t
support progressive scan, you won’t see a picture on the TV screen.
Note: Until recently, TVs only had VIDEO INPUT jacks. Therefore, your TV
might not carry the "IN" or "Input" label even though it is an input.
Note: If an HDMI (digital) input is used to connect a source (such as a
cable or satellite box) to the CS-700, the TV must also be connected with
an HDMI cable to preserve the digital signal. Also, if an analog signal is
connected to the CS-700, the TV must also be connected with an analog
signal. The CS-700 will not up-convert an analog signal to a digital signal.
Input and Output Jacks
Please see appendix I (page 28) for the basics on how input
and output jacks work with your Klipsch system.
CONNECTIONS page 5/6
STEP 5: Connect the Speakers
LEFT
SPEAKER
RIGHT
SPEAKER
WIRELESS
SUBWOOFER
KLIPSCH CONTROLLER
1. After you uncoil the speaker cable, connect one speaker to the RIGHT
(Red) connector on the back of your Klipsch system. This speaker will
be to your left when you are behind the system connecting, but it will
be on the right when you are facing the system. You can connect either
speaker to the LEFT or the RIGHT OUTPUT, you just need to place them
properly.
Speaker Setup Considerations
Front speakers typically sound best
when their tweeters are at approximately ear height for seated listeners.
If this isn’t possible, it is sometimes
beneficial to tilt the speaker down or
up slightly so that it is aimed into the
listening area.
•
If possible, position the speakers the same distance apart as they are
from the listening position.
•
Speakers should be pointed straight forward. Do not place the
speakers at an angle.
•
If you are putting speakers in a cabinet, on a rack or a table, try to
bring them out far enough so that they are at least flush with the
cabinet’s front edge.
•
When practical, arrange each speaker so that it is at somewhat
different distances from the floor, the wall behind it, and the wall
beside it. It can also help to have the left and right front speakers
at different distances from their nearest side walls. This staggering
helps smooth the bass range. Each speaker can be set on its bottom
or side. If you set them on the side and want to turn the Klipsch logo,
carefully pull the logo forward, turn and release it.
•
The subwoofer’s output will increase as it is moved closer to walls,
with maximum output when it is placed in a corner. If practical,
always place the subwoofer near a wall. Additionally, a subwoofer will
deliver the smoothest bass response when placed near a wall away
from openings, such as doors.
•
Naturally, there are exceptions to the rules, since no two rooms or
systems are exactly alike. Experiment with positioning to get the
best sound.
3. Rubber pads have been included in the Accessory box. These self
adhesive pads can be applied to the bottom of the speakers.
4. The CS-700 wirelessly transmits the subwoofer signal from the A/V
Center to the subwoofer. (If you wish to connect the subwoofer with a
standard RCA cable, simply connect one end of the cable to the black
“LFE” OUTPUT on the rear of the A/V Center and the other end to the
“LFE” INPUT on the rear of the subwoofer. Cable not included.)
5. Plug the power cord into the subwoofer and an AC outlet and turn the
subwoofer ON.
6. For best results, the antenna on the rear of the CS-700 A/V Center
should be pointed up.
Input and Output Jacks
Please see appendix I (page 28) for the basics on how input
and output jacks work with your Klipsch system.
SUB
•
2. Connect the other speaker to the LEFT (White) OUTPUT on the back of
the Klipsch system. The speaker connected to the LEFT OUTPUT will be
to your right when you are behind the system connecting, but it will be
on the left when you are facing the system.
6'-15'
TELEVISION
L
R
STEP 6: Connect other components (OPTIONAL)
VCR Back Panel
INPUT
L
RF IN
OUTPUT
R
L
R
RF OUT
AUDIO
VIDEO
2
S-VIDEO
1
AUX 2 - Side Panel
R - AUDIO - L
VIDEO
S-VIDEO
Connecting headphones to HEADPHONE OUTPUT
You can connect other components, such as a VCR, another recording device
(like a hard-disk drive product or DVD Recorder), or a video game system to
your Klipsch system using the AUXILIARY (AUX) INPUTS.
For private listening, connect compatible headphones to the HEADPHONE
jack on the side of the Klipsch system.
Connecting a component to AUX 1 INPUT
Connecting a device with USB to USB connector
1. From the component’s output jacks, connect the best available video
Connect a device with USB OUTPUT to the Klipsch system’s USB INPUT
connector. This port is only for compatible USB flash memory drives. It is not
suitable for direct connection to a computer, or to digital cameras.
option to the Klipsch system’s AUX 1 INPUT video jacks.
2. Do the same thing for the audio connection. Choose the best available
connection from the component’s AUDIO OUTPUT jacks, and connect
appropriate cables. Connect the cable(s) to the Klipsch system’s AUX 1
INPUT audio jacks.
Connecting a component to AUX 2 INPUT (side)
The AUX 2 INPUT jacks on the side of your Klipsch system were designed for
convenience when connecting temporary components, such as a video game
system or a digital camera/camcorder.
1. From the component’s output jacks, connect the best available video
option.
2. Do the same thing for the audio connection. Choose the best available
connection from the component’s output jacks, and connect the
appropriate cable.
Note: This USB port is a part of the "DISC" Source, not Aux 2.
Input and Output Jacks
Please see appendix I (page 28) for the basics on how input
and output jacks work with your Klipsch system.
CONNECTIONS page 7/8
STEP 7: Connect AM and FM Antennas (supplied)
AM GND
75Ω
- OR -
The back of your Klipsch System has jacks for the AM and FM antennas that
were packed with your system. Unwind the wires for each antenna to provide
the best reception. An outdoor antenna may be used in place of the supplied
indoor antennas. To add an outdoor antenna, consult a qualified installer.
Follow all safety instructions supplied with the antenna.
STEP 8: Turn on the TV and the Klipsch System
FM Antenna
3. Turn on the TV and tune to the correct video input channel. This
Plug the FM antenna into the Klipsch system’s FM (75W) jack in the section
labeled ANT. On the back of your Klipsch system, spread out the antenna
arms and move them around to establish optimum FM reception. Extend the
antenna as much as possible.
Some cable TV providers make FM radio signals available through the cable
service to your home. This connection is made to the external FM jack on
the back of the Klipsch system. To connect to this service, contact your
cable TV provider for assistance.
Make sure that the cable radio installation includes a TV/FM splitter so that
only the FM radio band, not the cable TV band, is received by the Klipsch
system. If necessary, contact your cable company.
AM Antenna
Plug the AM loop antenna into the AM GND jack in the section labeled ANT
on the back of your Klipsch system. Place the antenna loop at least 20 inches
(50 centimeters) away from your Klipsch system. To get optimum reception,
you may need to experiment with the positioning of the loop antenna.
1. Plug in the Klipsch system’s power cord to an AC power outlet.
2. Turn on the Klipsch system (press the ON/OFF button on the front
panel or on the remote control). You can also press DISC on the
remote.
is the channel that corresponds to the input jack you used on
the back of the TV to connect the Klipsch system. The name and
how you access this video input channel varies for different TVs.
Generally, you will press a button on the TV’s remote control, such
as SOURCE or INPUT or VID. See below if you can’t find the
correct input channel on your TV.
Set TV to the Right Channel
If you do not see a picture on your TV, check your TV's owner manual to see
how you tune the TV to the correct channel. It won't be "Channel 3" but it's
the same idea. You'll need to tune the TV to the "channel" that matches the
input jacks on the TV you used to connect to the Klipsch system's output jacks
(either COMPONENT, S-VIDEO, or COMPOSITE—which is regular VIDEO and
color-coded yellow). Below are some ideas to try if you can't find the answer in
the TV manual.
Button on TV Remote
SOURCE
INPUT
LINE
VIDEO
VID
Channel Number of TV Button on TV
00
92
VID
90
93
SVID
91
VID 1
CMPNT
You might have to press
the TV's channel down
button until you get to the
correct video channel.
SOURCE
INPUT
LINE
VIDEO
VID
STEP 9: Complete the On-screen Setup
1. Press MENU on your Klipsch system remote control (the main menu appears).
2. Press arrow down ç to highlight Setup and press ENTER (the Setup menu
items appear).
Match the on-screen option with the cables that are connected to each of the
jacks on your Klipsch system. This information tells the system what is connected
to it, and which cables and jacks were used.
3. TV Audio Connection: If you made a TV Audio connection, use the arrow
button to select where you connected the TV’s Audio OUTPUT to the Klipsch
system’s Audio Input. Use the å or ç arrow button to highlight the correct
option and press ENTER.
SAT/CABLE/HD: Choose this option if you connected audio from the
TV to one of the three Audio Input options in the SAT/CABLE/HD INPUT
section on the back of the Klipsch system.
AUX 1: Choose this option if you connected audio from the TV to one of
the audio options in the AUX 1 INPUT section on the back of the Klipsch
system.
AUX 2: Choose this option if you connected the TV’s audio to one of the
AUX 2 INPUT audio options on the side of the Klipsch system.
No Audio Connection: Choose this option if you didn’t connect the
audio from the TV to the Klipsch system. You’ll only hear audio from the
Klipsch system when you’re playing the radio or a disc, or through one of
the components connected to the Klipsch System (e.g., VCR, DVD Recorder,
mp3 player, etc.).
Note: If you connected the audio from the TV's Audio Output jacks to the Klipsch
system, you'll need to turn off your TV's internal speakers and may need to adjust
the audio setting in the TV's menu system. Locate your TV manual to get specific
instructions, as the procedures differ for different brands and types of televisions.
Connections page 9/10
4. TV Format: TV Format lets you choose between a standard TV screen and
a Widescreen option. The Widescreen option has an aspect ratio of 16:9. If
your TV has a 4:3 aspect ratio, select either the Standard or Letterbox option
depending on your preference.
5. RDS (Radio Data System): RDS is the system that allows broadcasters
to embed programming information in to the radio signal, such as the name of
the artist or song. Your Klipsch system is RDS-enabled.
If you want to turn on RDS, choose On and press ENTER (the name of the
radio station will appear on the Klipsch display).
Note: On most U.S. radio stations, artist and title information will appear with the
“Station ID.”
6. WIRELESS: Your Klipsch CS-700 system uses KlipschCast wireless
technology to transmit the subwoofer signal from the A/V center to
the subwoofer. The system is also capable if using KlipschCast to
transmit any of its sources, on-board or auxiliary, throughout your
home in CD quality. This signal can then be received and played
by other Klipsch audio products using KlipschCast technology.
Selecting Subwoofer Only turns off the wireless broadcast to all
KlipschCast components except the CS-700 subwoofer. For example, this might
be done when viewing/listening to content on the CS-700 that you do not wish to
broadcast to other KlipschCast components.
Selecting All Off will disable all wireless transmission including the subwoofer
signal. This is primarily used for diagnostics.
7. HOME CODE: The Home Code feature allows you to select a unique
channel for all your KlipschCast components to keep your content private and
unavailable to other nearby systems. The Home Code default is 0 for all
KlipschCast components and does not need to be changed unless other nearby
KlipschCast systems interfere. All KlipschCast components (including your
subwoofer) in your multi-room system must be on the same home code to
interact with one another. To check or change the home code on the CS-700,
select Home Code in the Setup Menu. From here you can see the
selected Home Code and change it if necessary.
To check or change the Home Code on your subwoofer, find the Home
Code dial on the rear of the subwoofer. The dial can be rotated with a small
flat blade screwdriver to select the desired number. If you change the Home
Code you must turn the subwoofer off and on again to reset the Home
Code. The cinema system and subwoofer must be on the same Home
Code to communicate wirelessly.
Presets
Play/Pause
Open/Close Volume
ç
Tuning
Buttons
Display
SOURCE
Chooses the function you want to use—radio,
DVD/CD, watch TV, access any other components
connected to your Klipsch system (VCR, video game
system, etc.). Each time you press the SOURCE
button, it goes to the next “Input” that corresponds
to the component that’s connected to that input
jack on the back of your Klipsch system.
When listening to the radio, this button moves to the
next radio station that you programmed into the
preset memory.
PRESETS
ç
ç
Power
ç
ç
Source
ç
Your Klipsch Controller
PLAY/Pause
Plays discs in disc tray, and pauses playback
when a disc is playing.
OPEN/CLOSE
Opens and closes the disc tray.
POwer
Turns your Klipsch system on and off.
VOLUME
Adjusts the volume.
ç
ç
å Tuning ç
Changes radio station. Specific functionality of these
buttons can be selected in the tuner setup menu.
DVD
DOLBY
DIGITAL
P.SCAN MP3
A
WMA MPEG4 JPEG ANGLE TITLE
TRK
CHAP
B ALL
PROG
CD RANDOM
The display on the front of your Klipsch system provides playback
information. The display illuminates each option that is active for the type of
media you are playing. The numbers on the display let you know the track,
title, and/or chapter number of the disc. Additionally, information from the
radio’s RDS (Radio Data System), such as artist and track information, is
displayed when you’ve tuned to the radio function. Below are explanations of
display messages you may encounter that may not be covered in other parts
of this manual.
Dolby® Digital
The trademarked marketing name for Dolby Laboratories’ AC-3 codec. The
common version contains six total channels of sound, with five channels
for normal-range speakers (Right Front, Center, Left Front, Right Rear and
Left Rear) and one channel for the subwoofer. The Dolby Digital format also
supports Mono and Stereo. Your Klipsch system supports Dolby Digital with
its 2.1 audio system design.
DTS (Digital Theatre Systems)
A multi-channel surround sound format (rival of Dolby Digital). With DTS, the
encoders and decoders support numerous channel combinations and stereo.
DTS contains four-channel+LFE (Low Frequency Effects) audio tracks. Digital
Theatre Systems was the name of the company that developed this format
(currently referred to as DTS). Film director Steven Spielberg was one of the
company’s initial investors. Spielberg films use the DTS audio format.
P.SCAN (Progressive Scan)
Lights if the P.SCAN switch on the back of the Klipsch system is in the ON
position.
Connections page 11/12
The Basics
Switching between media—TV, DVD, Radio, CDs, etc.
Your Klipsch system is the center of your entertainment room...now, you just need to understand
how to get from one type of entertainment to another. To move to a different type of media, press
the corresponding button on the remote control (DISC, AM/FM, SAT/CaB) or keep pressing
SOURCE on the front of your Klipsch system to access the different options.
When you turn on your Klipsch system, it tunes to the last source you used. The front panel
indicates what source is active.
DISC AM/FM SAT/CAB
AUX 1 AUX 2 TV DVD or CD
Radio
Watching TV from a set-top box (cable, satellite, HD receiver)
Component connected to AUX I INPUT jacks (e.g., TV or VCR)
Component connected to the jacks on the side of the unit
Watching TV without a set-top box connected
Progressive Scan TVs
On the back of your Klipsch CS-700 system, there is a progressive scan switch labeled
P.SCAN. Progressive scan is a result of the digital TV transition—it is a process digital TVs
can use to read and display broadcast signals. Progressive scan TVs display each pixel (picture
element) of the signal consecutively line by line. All progressive scan TVs are digital, but not all
digital TVs are progressive scan.
Some digital TVs only support the classic interlace display method that TVs have used since
their inception. With interlace scanning, a TV draws every other line of the broadcast signal—
first, the even numbered lines and then the odd numbered lines. This process happens so
quickly it tricks your eye so it appears as though you're seeing the entire picture.
ON
OFF
P.SCAN
If your digital TV is progressive scan, turn the P.SCAN switch to ON. Additionally, you must
use the Component Video connection (Y, PB, PR) from the Klipsch system’s VIDEO OUTPUT
jacks to the progressive scan TV’s Component Video (Y, PB, PR) input jacks in order for
progressive scan to work correctly. See Step 4 on page 5 for detailed instructions.
NOTE: If you put the P.SCAN switch in the ON position and your TV doesn’t support
progressive scan, you won’t see a picture on the TV screen.
Chapter 2: Remote control
The universal remote control that came packed with your Klipsch system can be programmed to operate the basic functions of many other brands of audio
and video components, such as TVs, satellite receivers, cable boxes, DVD players, and others. The design of the remote control groups the buttons to help
you achieve better performance from your remote. In this section of the manual, you will learn the function of each button and how to program it to operate
other brands of components. To use the remote control effectively, always aim it directly at the Klipsch controller.
Buttons
Descriptions of the buttons are arranged alphabetically to help you locate the information quickly.
0-9 Use the number buttons for direct “channel” access in TV or SAT/CABLE mode. In addition, these numbers can be used to select or input information in the menus or information banners.
Arrow Buttons Use the arrow buttons to highlight options and navigate through menu )
(
systems. The arrow buttons move the highlight in the corresponding
direction of the arrow buttons.
AM/FM
Selects the radio tuner and switches between AM and FM stations.
AUX 1
Switches the Klipsch unit to AUX 1. When the AUX 1 button is programmed,
it operates the basic functions of the component connected to the AUX 1 INPUT jacks.
AUX 2
Switches the Klipsch unit to AUX 2. When the AUX 2 button is programmed,
it operates the basic functions of the component connected to the AUX 2 INPUT (side panel) jacks.
CHANNEL/TRACK Selects the lower or higher station on the radio. If programmed properly,
selects the lower or higher channel on a TV, satellite receiver, or cable system.
Also skips tracks on CDs and chapters on DVDs.
(Channel Up/Down)
DISC
Places the remote in CD/DVD mode to operate the CD/DVD player.
DVD MENU
Displays or removes the DVD disc’s menu.
ENTER
Selects the highlighted option within a menu system.
EXIT Removes on-screen displays.
FORWARD Searches forward through a DVD, CD, mp3, and radio stations during
playback (or video tape, recordable DVD, or camcorder if the remote
is properly programmed).
GO BACK Returns to the previous menu in the menu system. When watching TV,
satellite receiver or cable channels, tunes to the previous channel if the remote
is programmed to operate those types of components.
GUIDE Displays the DVD menu when in DVD mode. During disc playback, displays the title menu if the disc has one and also removes the title menu and resumes playback. Displays the program guide in the TV or Satellite/Cable
mode (if available) and if the remote is programmed to operate
that component.
INFO Displays and removes the information banners for DVD, CD, and radio.
INPUT Accesses the individual input jacks on the Klipsch controller to see the signal of the component connected to the jacks.
MENU Displays the main menu of the selected component. In DISC or AM/FM mode, the Klipsch menu is displayed.
REMOTE CONTROL page 13/14
MUTE Reduces the audio to a minimum level. Press again to restore the volume.
Open/Close Opens and closes the disc drawer.
POWER Turns the Klipsch controller on and off and tunes it to the last selected input.
If the remote is programmed to operate other components, the POWER button is used together with the component buttons (AUX 1, TV, AUX 2, and SAT/CAB) to turn the components on and off.
PLAY Begins playback of disc (or video tape if the remote is properly programmed to operate a VCR).
PAUSE Temporarily stops disc play (or video recording/playback, recordable DVD or compatible camcorder, if the remote is properly programmed to operate those types of components).
RECORD When the remote is properly programmed, records a program on a recordable component, such as VCR, DVR, or RDV.
REVERSE Searches backward through a DVD, CD, mp3, and radio stations during
playback (or video tape, recordable DVD, or camcorder if the remote is properly programmed).
SAT/cab (Satellite Receiver/Cable)
Switches the Klipsch unit to SAT/CAB inputs. When the SAT/CAB button is programmed, it operates the basic functions of the component connected
to the SAT/CABLE/HD INPUT jacks.
STop Stops playback.
Surround Mode
Toggles between the OFF, ON or WIDE options in surround audio.
TV Selects the TV for which the button was programmed and operates the basic functions of that TV.
Volume
(Volume Up/Down)
Controls the audio level in every mode except when using the menu system. Also, restores volume when MUTE has been activated.
Programming Your Remote Control
Your remote control is a universal remote which means you can program it to operate other brands of
electronic components, such as TVs, satellite receivers, cable boxes, VCRs, etc. Follow these steps to
program your remote control.
Remote Control Batteries
If the batteries are removed from the remote control
after you have programmed the component buttons,
you might need to reprogram the buttons. The remote
memory is only maintained for a short period of time.
1. Turn off the component to be programmed.
2. Look up the brand and code in the code list (located in the “More Information” section of this
manual) or the “Remote Control” section of the on-screen menu system.
3. Press and hold the component button (AUX 1, AUX 2, TV or SAT/CAB) on the remote
control for three (3) seconds, or until the LED goes out.
4. Release the component button and enter the first code for your brand and type of component.
5. If the code is accepted, the LED will flash 3 times.
6. Press the POWER button to see if the component turns on. If it doesn’t, try another code from
the list.
Chapter 3: Operation
Compatible Discs
Playing a disc
•
•
DVDs—DVD-R, DVD-RW, DVD+R, DVD+RW, and DVD-ROM.
1. Press DISC on the remote to put the Klipsch system in DVD mode or
CDs—Audio CDs, CD-R, CD-RW, CD-ROM, and CDs that contain
mp3 music files or JPEG (picture) files.
2. If the TV didn’t turn on and tune to the correct video input channel
•
VCDs—Video CDs contain video and audio, but hold less information
than DVDs. VCDs are less common than DVDs. VCDs typically have
lower quality video and audio than DVDs.
•
Super VCDs—S-VCDs support MPEG-2 standard video and
MPEG-1 audio. They typically hold about 70 minutes of content.
Incompatible Discs
The Klipsch system does not support laserdiscs, CD-I, CD-ROM (computer
only discs), and discs recorded using other broadcast standards, such as
PAL, SECAM, DVD-RAM discs or pirated discs.
Regional Coding
DVD Players and DVDs are coded by region. The region codes must match in
order for the disc to play. The Klipsch system’s DVD player is Region 1. You
can only play Region 1 DVDs in this player.
toggle the SOURCE button on top of the unit.
(you will see the Klipsch DVD screen), turn on your TV and tune
the TV to the channel that matches how you connected the Klipsch
system output jacks to the TV’s input jacks (see page 5 for additional
information).
3. Press OPEN/CLOSE (the disc tray opens).
4. Place a disc into the tray with the label facing up (double-sided discs
have content on both sides, so you can load the disc with either side
up). The label that is facing up is the content that plays.
5. Press OPEN/CLOSE or PLAY (the disc tray closes and your Klipsch
system reads the contents of the disc).
6. What happens next depends upon the type of disc you put in the player
and how it was formatted.
7. If the disc doesn’t start playing automatically, follow instructions on the
screen or press PLAY.
operation page 15/16
DVD and VCD Playback Features
You can use the remote control to access various features during playback if the disc was formatted to support the features.
Transport
To move forward or backward on the disc, simply press FORWARD or REVERSE
during playback. Each time you press FORWARD or REVERSE, the speed will
increase until the maximum search speed is reached. To resume playback,
press PLAY.
To advance through the disc’s chapters during playback, press the CHannel å
button (the Info Banner appears with the Chapter selection highlighted). The
CHannel ç button takes you to the previous chapter.
LEFT
ARROW
REVERSE
PLAY
RIGHT
ARROW
FORWARD
To skip forward 10 seconds, press the right arrow button. For an instant
replay, which will skip backward 10 seconds, press the left arrow button.
In addition to using the remote control, you can use the Playback Info Banner to
access many playback features. See page 17 for more information.
Navigating Info Banners
Your Klipsch system is equipped with on-screen Info Banners that enable you to quickly access various playback features. The content of the banner changes
depending upon the type of media you are playing, but the way you navigate the banners is the same.
• To access the Info Banner, press INFO while the disc is playing.
• To see the individual options of an info banner item, simply use the LEFT and RIGHT arrow buttons to highlight the option and press ENTER, or use the
 or  arrows to select an option.
• There will be no Info Banners for mp3 or jpeg discs.
Time
HDMI Upscale
Subtitle
Angle
Time elapsed
of the
title playing
DVD Upscale pull-down
menu allows choice of
Auto, 480p, 720p, 1080i
Turns subtitles on
and off if the disc
was formatted
with subtitles
Appears if the disc
supports multiple
angles
Transport
Resume
Playback status
of the disc
Resumes playback
Chapter
Chapter number
playing and total
number of chapters
in the title
TIME DISPLAY: To use the time display as a search
feature, highlight the icon and use the number buttons
on the remote control to enter the time within the title you
want to access and press ENTER. You must enter two
digits for each field. For example, if you enter 0, 1, 2, 3,
1, 7 (01:23:17), playback will start one hour, 23 minutes,
and 17 seconds into the title. Additionally, you can use the
CHANNEL  or the  arrow button, CHANNEL 
or the  arrow button to increase or decrease time one unit
at time.
RESUME: To resume playback at the point where you
paused playback, highlight the resume icon and press
ENTER.
HDMI Upscale: To upscale the DVD playback through
HDMI, select the icon and use the CHANNEL or the
arrow button to choose 480p, 720p, 1080i or AUTO
DVD upscaling resolution and press ENTER. AUTO will
upscale to your TV’s default screen resolution, up to 1080i.
Zoom
Shows magnification
of image when zoom
is activated
CHAPTER: To access another chapter within
the title that is playing, use the number buttons
on the remote control while the Chapter icon
is highlighted. Additionally, you can use the
CHANNEL  or the  arrow button to move
forward a chapter at a time or CHANNEL 
or the  arrow button to go backward a chapter
at a time.
SUBTITLES (if available on disc): To change
the subtitles or turn off, highlight the Subtitle icon
and use the  arrow button to select and change
the subtitle.
ZOOM: Shows the magnification chosen. To
change, highlight the zoom icon and press ENTER.
ANGLE: If multiple angles are available for the
title playing, this icon will indicate the number of
angles and allow you to access other angles by
pressing the ENTER button.
operation page 17/18
Playing CDs
You’ll get maximum sound while playing audio CDs in your Klipsch system. To access playback features, press INFO on the remote control during playback
(the Info Banner appears).
Track
Time
Track number playing
and total number of
tracks on the CD
Time elapsed of
the track playing
Transport
Resume
Repeat
Playback
status of disc
Resumes
playback
Options include None, Track,
Disc and Random
Time Display: To use the time display as a
search feature, highlight the icon and use the
number buttons on the remote control to enter
the time within the track you want to access, and
press ENTER. You must enter two digits for each
field. For example, if you enter 0, 0, 0, 1, 2, 3
(00:01:23), playback will start one minute and 23
seconds into the track. Additionally, you can use
the CHannel å or ç button to increase or
decrease time one second at a time.
Resume: To resume playback at the point
where you paused playback, highlight the resume
icon and press ENTER.
Track: Shows the track playing and the total
number of tracks on the CD. To access another
track, you can use the number buttons on
the remote control to enter the track number.
Additionally, to move to the next track, you can
press the CHannel å or the å arrow button.
To move to the previous track, press CHannel
ç or the ç arrow button.
Repeat: If you want to repeat playback
of a Track or the Disc, or play the tracks in
random order press ENTER with the Repeat
icon highlighted. Press the ç arrow button to
highlight the repeat option you want to use and
press ENTER. To turn off repeat, select None
and press ENTER.
Playing CDs with mp3 or JPEG files
Playing the Radio
What you see on the TV screen when playing CDs with audio and picture
files depends upon the way the discs were formatted and the file type used.
Initially, the root menu will be displayed on the left side. Folders or files will
be displayed on the right and can be selected. Highlight the desired folder
or file from the right side and press ENTER. If a folder has been selected,
its contents will be displayed in this area. If a file has been selected, it will
play or be displayed on the screen. To navigate back up a level, select the
root menu from the right side. å and ç arrows keys are used to navigate
through the list. If the disc doesn’t play, consult the application you used to
create the disc.
When you are in the Tuner Mode, the remote control can be used to tune
radio stations. Use the FORWARD and REVERSE or the CHANNEL å
or ç button to change the frequency.
Setting up presets:
1. Tune to the station you would like. Press and hold the PRESET button
for approximately three seconds and release. You will see a number that
signals the next available preset on the display. Press the PRESET
button again to stop the flashing and store the station.
2. To change a preset you already have, tune to the preset station you
want to change and follow step 1.
3. There are twenty presets –10 FM and 10 AM.
On-screen info banner
To access the radio info banner, press INFO on the remote control.
Presets
Frequency
Accesses presets
Displays the
current station
Tuning
Options include
Seek, Scan, Step
and Presets
RDS
Radio Data
System
Tuning Mode: To access different ways to tune
to various radio stations, press ENTER with the Tuning
icon highlighted (the tuning options appear). Use the ç
arrow button to highlight the option you want to use and
press ENTER.
Presets: Shows you the station number
for each of the presets available. Highlight the
icon and press ENTER or ç arrow to see list
and select.
Seek: Goes to the next available station and stays tuned to it.
Scan: Previews stations throughout the frequency—plays for several seconds and then moves to the next station. To tune to a station during scan, press ENTER while it is playing.
RDS: RDS stands for Radio Data System and
enables broadcasters to embed information in
the signal. You can choose to turn this feature
on or off. Highlight this icon and press ENTER
or press the down ç arrow to see list.
Step: Moves incrementally one frequency step at a time.
operation/Menu system page 19/20
Chapter 4: Menu System
On-Screen Menu System
Your Klipsch CS-700 System contains on-screen menus that let you personalize
settings to get the most out of your home theater experience.
Navigating Menus
To access the menu system, press MENU (the main menu appears).
Use the arrow buttons to move the direction you want to go. You’ll notice
the menu is highlighted to let you know where you are.
MENU button
When a menu item is highlighted, press ENTER to see the submenus
or to activate the option that is highlighted.
Up arrow
Left arrow
Right arrow
EXIT button
Down arrow
ENTER button
On-Screen Menus
Audio
Treble: Use the å and ç arrow buttons to increase or decrease the
amount of high frequency sound.
Bass-Subwoofer: Use the å and ç arrow buttons to increase or
decrease the amount of low frequency sound.
Enhanced Surround: Choose the setting that is most desirable to you.
Use the arrow button to highlight ON, OFF or WIDE and press ENTER.
Setup
The Setup menu is described in Chapter 1. If you add components to
your system or change how they are connected, you may need to access
the Setup menu to tell your Klipsch system what is where and how it is
connected. Go to page 9 for detailed instructions.
Languages
Menu: Choose the language of the on-screen menus.
Audio: For DVDs, you can choose your primary language. If the DVD was
formatted with that language, the DVD will play in the language you select.
The default is English.
Subtitle: For DVDs, you can change the language setting for subtitles. If
the DVD was formatted with subtitles in the language chosen in this menu,
the subtitles will appear in that language. Turn on subtitles via the Info Banner
during playback (page 17).
Menu System page 21/22
Parental Control
The Parental Control menu lets you password-protect DVDs by using
the MPAA (Motion Pictures Association of America) rating system to tell the
Klipsch system which ratings require a password in order to play the DVD.
Lock System/Unlock System: Locking the system puts the ratings
limit you have selected into effect. Use the digits buttons to enter a four-digit
password.
MPAA Ratings: Use the å and ç arrow buttons on the remote to select
to the highest rating you find acceptable. Press ENTER.
Unrated Content: Some discs contain movies that don’t have a rating
assigned to them. Sometimes, movies you might find the most explicit are
unrated. Also, much of the new content on DVDs, such as director’s cuts,
interviews with actors, etc., is unrated. In this menu, tell the Klipsch system
how you want unrated content to be handled. Choose Lock Unrated
Content if you want unrated content to be password protected.
Set Password: Use the number buttons on the remote control to enter
the password that will be required for DVD content that is rated above the
level you have set as acceptable in the MPAA Ratings menu.
Note: It's a good idea to write down your password and keep it in a safe place.
Remote Control
The easiest way to control your home theater experience is to take the time
to program the remote control to operate your TV, set-top box or any other
components you have connected to your Klipsch system. Instructions for
programming the remote control are in Chapter 2. To program the remote
control, you have to find the code that matches the component you have. The
codes are in Chapter 6, but are also provided in this menu.
TV: In order for your Klipsch remote control to operate your TV, follow the
instructions in Chapter 2. To enter the code for your TV, access the Remote
Control menu. With TV highlighted, press ENTER.
SAT-CABLE-HD: This menu has codes for satellite receivers, cable boxes,
and HD receivers. Use the codes in this menu to program your remote control
to operate the type of set-top box you connected to your Klipsch system.
AUX 1: Use codes to program the remote control to operate a connected
component, preferably the component you have connected to the AUX 1 jacks
on the back of your Klipsch system.
AUX 2: Use codes to program the remote control to operate a connected
component, preferably the component you have connected to the AUX 2 jacks
on the side of your Klipsch system.
Chapter 5: troubleshooting
Trying to find the solution to a problem with your equipment can be very
frustrating. The symptoms and solutions in this section will hopefully assist
you in finding the correct answers. If you have additional questions that this
manual cannot answer, please contact your nearest Klipsch dealer or call
1-800-KLIPSCH.
General problems
•
No power—make sure you use an outlet that is not controlled by a
wall switch.
•
No power—make sure you’ve plugged the unit into a working outlet or
the power strip is turned on.
•
Menu is displayed in a foreign language—check Languages in the
menu system to make sure the language that you want is selected.
•
Screen saver appears on TV—press any button to remove the screen
saver from the TV screen.
•
Disc tray doesn’t open—try unplugging the power cord and plugging
it back in. Press and hold STOP for approximately 3 seconds to open
the tray.
•
Disc won’t eject—disc cannot be ejected when the player is reading
the disc. Wait a few seconds before ejecting the disc.
Video problems
If there is noise when the TV is turned on, the speakers may be too
close to the audio system. See page 6 for more information.
•
Make sure the MUTE button on the remote control has not been
activated.
•
•
•
Make sure the disc is not bad, damaged or dirty.
Check the speaker cable connections.
Check the options selected in the Audio menu.
Remote Control problems
•
Make sure you have selected the correct component button placing the
remote in that mode to operate the component.
•
•
•
Check batteries and replace them if they are weak.
•
Make sure there are no obstructions between the remote and the
component you’re trying to operate.
Make sure batteries are inserted correctly with the polarities matching.
If you programmed your remote to operate a specific component, you
might need to re-program it.
Playback problems
•
Make sure the Klipsch system is in DVD mode (press DISC on the
remote control).
If the disc isn’t playing, make sure the type of disc matches those listed
in Chapter 3. If you’re trying to play a DVD, make sure it is inserted with
the label side up and it is coded for Region 1.
•
Make sure the TV is tuned to the Video Input Channel that matches
the input jack(s) you used to connect the TV to the Klipsch system (see
page 5).
If the disc starts to play, but stops immediately, you might need to clean
the disc or check for condensation in the player. If condensation has
formed in the player, allow it to dry.
•
Make sure the cables are attached securely (check your connections
on page 5). You must connect Klipsch output jacks to a set of the TV’s
input jacks.
If the picture is distorted, fuzzy or jumps, try another disc as the disc
might be damaged. Radio problems
•
•
Make sure the TV and Klipsch system are turned on.
•
•
•
•
Check the P.SCAN switch on the back of the Klipsch system. Make
sure it is in the OFF position unless you are certain your TV supports
progressive scan. The components must be connected via the Y, PB, PR
jacks to use P.SCAN. See page 12 for additional information.
•
•
•
Check the settings in the Parental Control menu.
•
Make sure you have the wireless turned ON in the Wireless menu
(within the setup menu).
•
Make sure all KlipschCast components are set to the same home code
number.
•
HI DEF component video input Y, PB, PR must have a
corresponding HI DEF component video output.
Digital HDMI component video input must have a corresponding
Digital HDMI component video output.
Audio problems
•
Make sure the cables are attached correctly, and that you’ve connected
the appropriate cable to the appropriate jack (see page 28 for
information about different audio options).
•
Refer to your TV’s owner manual to find out the procedures to set
up your TV for a home theater system. With most TVs, you’ll need to
turn off the TV’s internal speakers via the TV menu or a switch on
the back of the TV. Additionally, you may need to change the Fixed or
Variable setting.
•
Check the settings in the Klipsch system’s Setup menu, specifically
the TV Audio Connection submenu. Make sure your selection
matches the Klipsch system input jack you used to connect the audio
originating from the TV or set-top box.
If the incoming signal is weak, distorted, or noisy, you might need to
connect an outside FM antenna or change the direction of the antenna.
General Wireless problems
If your wireless broadcast to other KlipschCast component (other than the
subwoofer) is interrupted for long periods of time or has static:
•
You may have moved the KlipschCast component beyond its extended
range. Try locating it closer to the CS-700 system.
•
•
Check to make sure you have the proper source selected.
The CS-700 system can only decode one digital multi channel signal at
a time. You cannot decode one digital signal for local viewing/listening
and a second for wireless transmission. Wireless transmission occurs
in two-channel mode therefore it is recommended that you change the
audio output of the source you wish to transmit to analog (R/L) stereo.
This will allow you to use the decoder in the CS-700 for the locally
viewed/heard source and wirelessly distribute the second signal to all
KlipschCast listeners.
TROUBLE/CARE page 23/24
Chapter 6: Care and Maintenance
Klipsch System
Cleaning
•
If your unit has been stored in a cool place for any length of time,
during a journey for example, wait for about 2 hours before using it.
•
Use a soft, dry, clean cloth when cleaning the unit. Regularly dust
all vents.
•
Keep the equipment away from sources of heat, such as a stove or
radiator.
•
Do not use solvents, abrasive or alcohol-based products when cleaning
your system as it might damage the unit.
•
Avoid blocking the ventilation openings on the unit to prevent
overheating.
•
This unit is designed for continuous use. Switching off the unit places
it in standby mode, but does not disconnect it from the outlet power.
•
If you notice any burning or smoke, disconnect the unit immediately to
avoid any damage to you, the house, and/or the unit.
•
•
•
Handle your discs with care. DO NOT touch a disc’s surface. Hold it by
the edge, or by one edge and the center hole.
•
Use a soft clean cloth to wipe a disc. Wipe from the inner edge toward
the outer edge. DO NOT WIPE IN A CIRCULAR MOTION.
If an object or liquid enters the unit, unplug it immediately and have it
checked by an authorized dealer.
•
•
Insert the disc with the label facing up (for a single-sided disc).
Do not attempt to look inside the unit through the disc tray opening or
any other opening. Invisible laser radiation when open. Avoid exposure
to beam. Class 1 laser product. This system must be opened only by
qualified technicians to prevent accidents caused by the laser beam.
•
•
Always keep discs in their cases and store the cases vertically.
•
•
•
•
DO NOT write on a disc or put labels or tape on the label surfaces.
•
This unit is for domestic use only and must not be used for industrial
purposes.
•
Total or partial copying of recordings protected by copyright
legislation, without the explicit permission of the holder of the rights,
contravenes current legislation.
•
Handling and Caring for Discs
Copying or downloading music files for sale or any other business
purpose constitutes or could constitute a violation of copyright law.
Place the disc properly into the tray. Never place two discs or more in
the tray.
DO NOT store discs in direct sunlight or locations with high temperatures or high humidity, or extremely low temperatures.
DO NOT scratch discs.
DO NOT move the unit when a disc is being played.
DO NOT use record cleaning sprays, anti-static liquids, benzene thinner,
or other solvents for cleaning discs. They can damage the disc surface.
Remote Control Code Lists
TV
(TV / AUX 1 / AUX 2 Buttons)
Acer .......................................................... 0124
Admiral ................................. 0001, 0024, 0026
Adventura.................................................. 0020
Aiko .......................................................... 0008
Aiwa ......................................................... 0145
Akai ............................ 0023, 0074, 0137, 0143
Alleron ...................................................... 0010
American Action......................................... 0025
Amtron ............................................ 0009, 0025
Anam ........................................................ 0025
Anam National ......................... 0002,0009,0025
AOC ............................0003, 0004, 0005, 0023,
................................... 0070, 0097, 0103, 0115
Apex ............................................... 0047, 0142
Astar ......................................................... 0108
Audiovox ............................... 0009, 0025, 0160
Bang & Olufsen.......................................... 0139
Bell & Howell ................................... 0001, 0011
Benq ............................................... 0064, 0124
Bradford .......................................... 0009, 0025
Brillian............................................. 0028, 0078
Brockwood ...................................... 0003, 0115
Broksonic .............................. 0025, 0026, 0137
Candle ...............0003, 0005, 0020, 0023, 0115
Carnivale ................................................... 0023
CCE .......................................................... 0031
Centurion .................................................. 0006
Citizen ...............0003, 0005, 0008, 0009, 0016,
................................... 0019, 0023, 0025, 0115
Clarion ...................................................... 0025
Coby ......................................................... 0161
Colortyme .............................. 0003, 0005, 0115
Concerto ............................... 0003, 0005, 0115
Contec ...................................................... 0025
Contec/Cony .......................... 0007, 0009, 0025
Craig ....................................................0009, 0025
Crown ................................... 0009, 0014, 0025
CTX........................................................... 0063
Curtis Mathes .....0000, 0003, 0005, 0011, 0016
..........................0019, 0023, 0024, 0053, 0115
CXC ................................................ 0009, 0025
Cytron ....................................................... 0141
Daewoo ....................... 0003, 0004, 0005, 0008
................................... 0019, 0049, 0070, 0115
Daytron ..................... 0003, 0005, 00019, 0115
Dell ................................................. 0098, 0102
Denon ....................................................... 0053
DiamondVision ................................. 0068, 0148
Dimensia ................................................... 0000
Dumont ....................... 0003, 0018, 0033, 0115
Durabrand ............................. 0022, 0025, 0026
Dwin ......................................................... 0024
Electrograph .............................................. 0104
Electrohome ................ 0002, 0003, 0005, 0115
Emerson...0003, 0005, 0007, 0009, 0010, 0011
................0019, 0025, 0026, 0049, 0115, 0146
Emprex...................................................... 0114
Envision....................... 0003, 0005, 0023, 0115
Epson........................................................ 0095
ESA........................................................... 0074
Fisher........................................................ 0011
Fujitsu ....................................................... 0010
Funai..................................... 0009, 0010, 0025
Futuretech ....................................... 0009, 0025
Gateway ................................ 0027, 0104, 0125
GE ....................0000, 0002, 0003, 0005, 0012,
................................... 0013, 0038, 0115, 0152
Gibralter .............0003, 0018, 0023, 0033, 0115
Goldstar ...................... 0003, 0004, 0005, 0007
................................... 0019, 0023, 0070, 0115
Grunpy .................................. 0009, 0010, 0025
Haier ......................................................... 0022
Hallmark................................ 0003, 0005, 0115
Harvard ........................................... 0009, 0025
Havermy .................................................... 0024
Hewlett Packard..................... 0092, 0121, 0123
Hisense ........................................... 0032, 0101
Hitachi...............0003, 0005, 0007, 0039, 0042,
................................... 0053, 0073, 0115, 0135
HP ........................................ 0092, 0116, 0123
ILO ....................0079, 0106, 0111, 0112, 0138
IMA ................................................. 0009, 0025
Infinity ....................................................... 0014
InFocus ..................................................... 0136
Initial ............................................... 0138, 0144
Insignia ..............0065, 0066, 0067, 0069, 0113
Inteq ......................................................... 0033
Janeil ........................................................ 0020
JBL ........................................................... 0014
JC Penney ..........0000, 0003, 0004, 0005, 0012
..........................0013, 0016, 0019, 0070, 0115
Jensen .................................. 0003, 0005, 0115
JVC ............................. 0007, 0013, 0061, 0089
Kawasho ............................... 0003, 0005, 0115
KEC........................................................... 0025
Kenwood ..................... 0003, 0005, 0023, 0115
Kloss Novabeam .................... 0009, 0020, 0025
KTV ....................0009, 0019, 0023, 0025, 0031
LG......................................... 0004, 0070, 0162
Loewe ....................................................... 0014
Logik......................................................... 0001
Luxman ................................. 0003, 0005, 0115
LXI .............................. 0000, 0005, 0011, 0014
Magnavox..........0003, 0005, 0014, 0023, 0055,
......0081, 0102, 0115, 0138, 0144, 0146, 0155
Majestic .................................................... 0001
Marantz.......................0003, 0005, 0014, 0023,
....................................................... 0115, 0128
Maxent ............................................ 0104, 0110
Megatron ........................................ 0005, 0053
Memorex .....................0001, 0004, 0005, 0011,
....................................................... 0026, 0070
MGA ........0003, 0004, 0005, 0023, 0070, 0115
Midland ....................... 0013, 0018, 0019, 0033
Mintek............................................. 0138, 0144
Minutz ....................................................... 0012
Mitsubishi..........0003, 0004, 0005, 0024, 0062,
................................... 0070, 0115, 0132, 0159
Montgomery Ward ..................................... 0001
Motorola.......................................... 0002, 0024
MTC ..................0003, 0004, 0005, 0016, 0023,
....................................................... 0070, 0115
Multitech ............................... 0009, 0025, 0031
Multivision ................................................. 0015
NAD .......................................................... 0005
NEC ........0002, 0003, 0004, 0005, 0023, 0070,
....................................................... 0096, 0115
Net-TV ............................................ 0104, 0105
Nikko .................................... 0005, 0008, 0023
Norcent ..................................................... 0097
NTC .......................................................... 0008
Olevia.............................................. 0091, 0094
Onwa .............................................. 0009, 0025
Optoma ..................................................... 0021
Optonica.................................................... 0024
Orion ......................................................... 0026
Panasonic ..........0002, 0013, 0014, 0037, 0040
..........................0057, 0071, 0087, 0119, 0166
Penny........................................................ 0023
Philco ......0002, 0003, 0004, 0005, 0007, 0014,
............................................. 0023, 0070, 0115
Philips .....0002, 0003, 0007, 0014, 0043, 0052,
..........................0090, 0115, 0138, 0144, 0155
Philips Magnavox ............................. 0043, 0055
Pilot ............................ 0003, 0019, 0023, 0115
Pioneer ..............0003, 0005, 0072, 0076, 0115
Plasmsync ....................................... 0126, 0128
Polaroid ................................. 0029, 0117, 0163
Portland .............0003, 0004, 0005, 0008, 0019
....................................................... 0070, 0115
Price Club.................................................. 0016
Prism ........................................................ 0013
Proscan........................................... 0000, 0058
Proton ......................... 0003, 0005, 0007, 0115
Proview ..................................................... 0029
Pulsar ......................... 0003, 0018, 0033, 0115
Quasar ............................................ 0002, 0013
Radio Shack .......................... 0011, 0023, 0025
Radio Shack/Realistic ... 0000, 0003, 0005, 0007
..........................0009, 0011, 0019, 0025, 0115
RCA ........0000, 0002, 0003, 0004, 0005, 0034,
...............0044, 0045, 0054, 0059, 0070, 0115,
....................................................... 0154, 0165
Realistic ................................ 0011, 0023, 0025
Runco ................................... 0018, 0023, 0033
Sampo ..............0003, 0005, 0019, 0023, 0077,
............................................. 0104, 0115, 0125
Samsung ............0003, 0004, 0005, 0007,0016,
...............0019, 0023, 0031, 0070, 0074, 0088,
............................................. 0115, 0120, 0149
Sansui ................................... 0026, 0056, 0137
Sanyo.......................... 0003, 0011, 0100, 0115
Scotch....................................................... 0005
Scott ........0003, 0005, 0007, 0009, 0010, 0025
....................................................... 0107, 0115
Sears ................0000, 0003, 0005, 0010, 0011,
....................................................... 0078, 0115
Sharp ................0003, 0005, 0007, 0019, 0024,
......0035, 0082, 0083, 0085, 0086, 0115, 0150
Sheng Chia................................................ 0024
Shogun ........................................... 0003, 0115
Signature................................................... 0001
Sony .......0041, 0046, 0048, 0050, 0051, 0075,
......0080, 0130, 0134, 0156, 0157, 0158, 0164
Soundesign .................0003, 0005, 0009, 0010,
....................................................... 0025, 0115
SSS............................. 0003, 0009, 0025, 0115
Starlite ............................................ 0009, 0025
Superscan ............................. 0024, 0109, 0146
Supre-Macy............................................... 0020
SVA ........................................................... 0127
Sylvania..............0003, 0005, 0014, 0023, 0115
....................................................... 0146, 0153
Symphonic ............................ 0009, 0025, 0060
Syntax ............................................. 0030, 0091
Syntax-Brillian.................................. 0078, 0091
Tandy ........................................................ 0024
Tatung................................... 0002, 0027, 0105
Technics .................................................... 0013
Techwood .................... 0003, 0005, 0013, 0115
Teknika ....0001, 0003, 0004, 0005, 0007, 0008
......0009, 0010, 0016, 0019, 0025, 0070, 0115
Telecaption ................................................ 0017
TMK ...................................... 0003, 0005, 0115
TNCi.......................................................... 0033
Toshiba .............0011, 0016, 0017, 0131, 0133,
................................... 0137, 0140, 0147, 0151
Totevision .................................................. 0019
Trutech...................................................... 0099
TVS ........................................................... 0026
Universal ................................................... 0012
V Inc. ........................................................ 0093
Vector Research......................................... 0023
Vidtech ...............0003, 0004, 0005, 0070, 0115
Viewsonic ...........0093, 0104, 0118, 0122, 0125
Viking ........................................................ 0020
Viore ......................................................... 0106
Vizio ............................ 0027, 0093, 0115, 0129
Wards .....0000, 0001, 0003, 0004, 0005, 0010,
..........................0012, 0014, 0023, 0070, 0115
Westinghouse .................................. 0084, 0093
White Westinghouse......................... 0026, 0049
Yamaha ....0003, 0004, 0005, 0023, 0070, 0115
Zenith ................0001, 0003, 0018, 0026, 0033
....................................................... 0036, 0115
TV/DVD Combo
(TV / AUX 1 / AUX 2 Buttons)
TV Code
DVD Code
Akai ............................. 0137.............. 2093
.................................... 0143.............. 2098
Apex ............................ 0142.............. 2097
Audiovox ...................... 0160.............. 2103
Bang & Olufsen............. 0139.............. 2094
Broksonic ..................... 0137.............. 2093
Coby ............................ 0161.............. 2107
TV Code
DVD Code
Cytron .......................... 0141.............. 2096
Ilo ................................ 0138.............. 2087
.................................... 0144.............. 2099
Initial ............................ 0138.............. 2087
.................................... 0144.............. 2099
LG................................ 0162.............. 2104
Magnavox..................... 0138.............. 2087
.................................... 0144.............. 2099
Mintek.......................... 0138.............. 2087
.................................... 0144.............. 2099
Panasonic .................... 0166.............. 2109
Polaroid ........................ 0163.............. 2105
Philips .......................... 0138.............. 2087
.................................... 0144.............. 2099
RCA ............................. 0165.............. 2108
Sansui .......................... 0137.............. 2093
Sony ............................ 0164.............. 2106
Toshiba ........................ 0137.............. 2093
.................................... 0140.............. 2095
TV/VCR Combo
(TV / AUX 1 / AUX 2 Buttons)
TV Code
VCR Code
GE ............................... 0152.............. 1053
Magnavox..................... 0155.............. 1056
Philips .......................... 0155.............. 1056
RCA ............................. 0154.............. 1055
Samsung ...................... 0149.............. 1050
Sharp ........................... 0150.............. 1051
Sony ............................ 0156.............. 1057
Sylvania........................ 0153.............. 1054
Toshiba ........................ 0151.............. 1052
TV/DVD/VCR Combo
(TV / AUX 1 / AUX 2 Buttons)
TV Code DVD Code VCR Code
DiamondVision .. 0148........ 2102.......... 1049
Emerson........... 0146........ 2100.......... 1047
Magnavox......... 0146........ 2100.......... 1047
Superscan ........ 0146........ 2100.......... 1047
Sylvania............ 0146........ 2100.......... 1047
Toshiba ............ 0147........ 2101.......... 1048
VCR
(AUX 1 / AUX 2 Buttons)
Adventura.................................................. 1007
Aiwa ......................................................... 1007
Akai ................................................ 1001, 1011
American High ........................................... 1006
Apex ......................................................... 1040
Asha ......................................................... 1004
Audio Dynamics ......................................... 1002
Audiovox ................................................... 1005
Bang & Olufsen.......................................... 1013
Beaumark.................................................. 1004
Bell & Howell ............................................. 1003
Broksonic ........................................ 1036, 1038
Calix.......................................................... 1005
Candle ............................................ 1004, 1005
Canon ....................................................... 1006
Citizen ............................................. 1004, 1005
Colortyme .................................................. 1002
Craig ............................................... 1004, 1005
Curtis Mathes .............. 1000, 1002, 1004, 1006
Cybernex ................................................... 1004
Daewoo ..................................................... 1007
DBX .......................................................... 1002
DiamondVision ........................................... 1049
Dimensia ................................................... 1000
Dynatech ................................................... 1007
Electrohome .............................................. 1005
Electrophonic ............................................. 1005
Emerson.............1005, 1006, 1007, 1039, 1047
ESA........................................................... 1023
Fisher........................................................ 1003
Fuji ................................................. 1001, 1006
Funai..................................... 1007, 1015, 1039
Garrard ..................................................... 1007
GE .............................. 1000, 1004, 1006, 1053
Goldstar .......................................... 1002, 1005
Gradiente .................................................. 1007
CARE AND MAINTENANCE page 25/26
Remote Control Code Lists (continued)
Harley Davidson ......................................... 1007
Harman/Kardon ......................................... 1002
Headquarter .............................................. 1003
Hitachi................................... 1008, 1009, 1011
Insignia ........................................... 1033, 1046
Instant Replay ............................................ 1006
JC Penney .........1002, 1003, 1004, 1005, 1006,
....................................................... 1008, 1009
JCL ........................................................... 1006
Jensen .................................. 1008, 1009, 1011
JVC ...................1002, 1003, 1011, 1028, 1029,
....................................................... 1030, 1031
Kenwood ............................... 1002, 1003, 1011
Kodak ............................................. 1005, 1006
LG............................... 1005, 1033, 1034, 1035
Lloyd’s ...................................................... 1007
LXI ............................................................ 1005
Magnavox.................... 1006, 1020, 1047, 1056
Magnin...................................................... 1005
Marantz................................. 1002, 1003, 1006
Marta ........................................................ 1005
Matsushita ................................................ 1006
MEI ........................................................... 1006
Memorex ...........1003, 1004, 1005, 1006, 1007,
............................................. 1014, 1022, 1038
MGN Technology ........................................ 1004
Minolta ............................................ 1008, 1009
Mitsubishi.............................. 1008, 1009, 1019
Motorola.................................................... 1006
MTC .......................................................... 1004
Multitech ......................................... 1004, 1007
NEC ...................................... 1002, 1003, 1011
Nikko ........................................................ 1005
Noblex....................................................... 1004
Olympus .................................................... 1006
Optimus .................................................... 1005
Orion ......................................................... 1014
Panasonic ....................................... 1006, 1017
Pentax............................................. 1008, 1009
Philco ........................................................ 1006
Philips ......................... 1006, 1020, 1039, 1056
Philips Magnavox ....................................... 1020
Pilot .......................................................... 1005
Pioneer ..................................................... 1008
Polaroid ..................................................... 1040
Presidian ................................................... 1039
Proscan..................................................... 1000
Quarter...................................................... 1003
Quartz ....................................................... 1003
Quasar ...................................................... 1006
Radio Shack .............................................. 1005
Radio Shack/Realistic ............ 1003, 1004, 1005,
....................................................... 1006, 1007
Radix......................................................... 1005
Randex ...................................................... 1005
RCA ..................1000, 1004, 1006, 1008, 1009,
....................................................... 1016, 1055
Realistic .............1003, 1004, 1005, 1006, 1007
Ricoh ........................................................ 1012
Samsung ..................... 1004, 1032, 1044, 1050
Sansui ................................... 1011, 1014, 1038
Sanyo.................................... 1003, 1004, 1045
Sears .................1003, 1005, 1006, 1008, 1009
Sharp .............................................. 1037, 1051
Shintom .......................................... 1001, 1009
Shogun ..................................................... 1004
Singer ............................................. 1006, 1012
Sony .................1001, 1010, 1018, 1024, 1025,
................................... 1026, 1041, 1043, 1057
STS ........................................................... 1006
Superscan ................................................. 1047
Sylvania..............1006, 1007, 1039, 1047, 1054
Symphonic ............................ 1007, 1015, 1039
Tandy ........................................................ 1003
Tashiko...................................................... 1005
Tatung....................................................... 1011
Teac ................................................ 1007, 1011
Technics .................................................... 1006
Teknika ................................. 1005, 1006, 1007
TMK .......................................................... 1004
Toshiba ..............1008, 1027, 1042, 1048, 1052
Totevision ........................................ 1004, 1005
Unitech...................................................... 1004
Vector Research......................................... 1002
Video Concepts .......................................... 1002
Videosonic ................................................. 1004
Wards ......1004, 1005, 1006, 1007, 1008, 1009
White Westinghouse................................... 1015
XR-1000 ......................................... 1006, 1007
Yamaha ................................. 1002, 1003, 1011
Zenith ......................... 1001, 1012, 1021, 1033
DVD/VCR Combo
(AUX 1 / AUX 2 Buttons)
DVD Code
VCR Code
Apex ............................ 2088.............. 1040
Broksonic ..................... 2083.............. 1036
.................................... 2086.............. 1038
Insignia ........................ 2081.............. 1033
.................................... 2085.............. 1033
JVC .............................. 2076.............. 1028
.................................... 2077.............. 1029
.................................... 2078.............. 1030
.................................... 2079.............. 1031
LG................................ 2081.............. 1033
.................................... 2082.............. 1034
.................................... 2081.............. 1035
Memorex ...................... 2086.............. 1038
Polaroid ........................ 2088.............. 1040
Samsung ...................... 2080.............. 1032
Sansui .......................... 2086.............. 1038
Sanyo........................... 2092.............. 1045
Sharp ........................... 2084.............. 1037
Sony ............................ 2072.............. 1024
.................................... 2073.............. 1025
.................................... 2074.............. 1026
.................................... 2089.............. 1041
.................................... 2091.............. 1043
Toshiba ........................ 2075.............. 1027
.................................... 2090.............. 1042
Zenith .......................... 2081.............. 1033
Cable
(SAT-CAB / AUX 1 / AUX 2 Buttons)
ABC ...................4000, 4001, 4003, 4022, 4023
Adelphia .......................................... 4033, 4037
Americast .................................................. 4031
Antronix........................................... 4005, 4006
Archer ....................................................... 4006
AT&T ......................................................... 4041
Bell South .................................................. 4031
Cable Vision............................................... 4038
Cabletenna ................................................ 4005
Cableview.................................................. 4004
Clearmaster ............................................... 4030
ClearMax ................................................... 4030
Colour Voice .............................................. 4008
Comcast...................... 4029, 4039, 4043, 4044
Contec ...................................................... 4009
Coolmax .................................................... 4030
COX ................................................ 4029, 4044
Director ........................................... 4029, 4044
Eastern...................................................... 4010
Everquest .................................................. 4024
Focus ........................................................ 4028
GC Electronics ........................................... 4006
GE ............................................................ 4000
Gemini ............................................ 4011, 4024
General Instrument ... 4000, 4027, 4029, 4039, 4044
Goldstar .................................................... 4025
Hamlin ............................................ 4012, 4013
Hitachi....................................................... 4000
Jasco ........................................................ 4024
Jerrold....4000, 4011, 4022, 4024, 4027, 4029, 4044
Magnavox.................................................. 4014
Memorex ................................................... 4023
Motorola............4027, 4029, 4034, 4035, 4036,
................................... 4041, 4043, 4044, 4048
Movie Time ................................................ 4015
Multitech ................................................... 4030
NEC .......................................................... 4002
NET Brazil.................................................. 4042
NSC .......................................................... 4015
Oak ........................................................... 4009
Pace ......................................................... 4026
Panasonic ............................. 4019, 4021, 4023
Paragon .................................................... 4023
Philips ................................... 4007, 4008, 4014
Pioneer ..............4016, 4017, 4025, 4033, 4045
Popular Mechanics .................................... 4028
Proscan..................................................... 4000
Pulsar ....................................................... 4023
Quasar ...................................................... 4023
Radio Shack .................................... 4024, 4030
RCA ................................................ 4004, 4021
Realistic .................................................... 4006
Recoton..................................................... 4028
Regal ........................................................ 4013
Regency .................................................... 4010
Rembrandt ................................................ 4000
Runco ....................................................... 4023
Samsung ......................................... 4017, 4025
Scientific Atlanta ..........4003, 4033, 4037, 4041,
..........................4045, 4047, 4049, 4050, 4051
Signal.............................................. 4011, 4024
Signature................................................... 4000
Sony ............................................... 4032, 4038
Sprucer ..................................................... 4021
Standard Component ................................. 4018
Starcom ................................ 4011, 4022, 4024
Stargate .......................................... 4011, 4024
Starquest......................................... 4011, 4024
Supercable ...................................... 4027, 4046
Supermax .................................................. 4030
TIME WARNER ........................................... 4040
Tocom ....................................................... 4001
Toshiba ..................................................... 4023
Tristar........................................................ 4030
Tusa ................................................ 4011, 4024
TV86 ......................................................... 4015
Unika .............................................. 4005, 4006
United Cable .............................................. 4022
Universal ......................................... 4005, 4006
V2............................................................. 4030
View Star ............................... 4009, 4014, 4015
Viewmaster ............................................... 4030
Vision ........................................................ 4030
Vortex View................................................ 4030
Zenith ................................... 4020, 4023, 4031
Zentek....................................................... 4028
Satellite Receiver
(SAT-CAB / AUX 1 / AUX 2 Buttons)
DIRECTV...3000, 3001, 3005, 3006, 3008, 3009
..... 3010, 3013, 3014, 3015, 3017, 3019, 3020,
..... 3022, 3023, 3025, 3026, 3027, 3030, 3031,
..... 3032, 3033, 3034, 3036, 3037, 3038, 3040,
...............3042, 3043, 3054, 3055, 3057, 3059,
....................................................... 3062, 3067
Dish Network .....3012, 3016, 3047, 3050, 3051,
..........................3052, 3053, 3056, 3058, 3060
Dishpro ..............3012, 3016, 3050, 3058, 3060
Echostar ...3012, 3016, 3050, 3056, 3058, 3060
Expressvu .................... 3012, 3016, 3050, 3060
GE ............................................................ 3014
General Instrument .................................... 3007
GOI ....................................... 3012, 3016, 3050
Hisense ..................................................... 3011
Hitachi....................................................... 3017
HTS....................................... 3012, 3016, 3050
Hughes .............3000, 3001, 3008, 3015, 3025,
................................... 3027, 3037, 3054, 3063
Humax ...................................................... 3048
Ilo ............................................................. 3011
Jerrold ...................................................... 3007
JVC ....................3003, 3012, 3016, 3050, 3056
LG................................................... 3010, 3044
Magnavox.................................................. 3006
Memorex ................................................... 3006
Mitsubishi........................................ 3015, 3027
Motorola................................ 3007, 3018, 3061
Next Level ................................................. 3007
Panasonic ....................................... 3013, 3042
Pansat....................................................... 3045
Paysat ....................................................... 3006
Philips ...............3005, 3006, 3008, 3015, 3017,
................................... 3034, 3054, 3063, 3067
Proscan................................. 3014, 3036, 3059
Proton ....................................................... 3011
Radio Shack .............................................. 3007
RCA ........3001, 3009, 3014, 3028, 3029, 3030,
................3031, 3033, 3035, 3057, 3063, 3064
Realistic .................................................... 3002
Samsung ............3008, 3021, 3038, 3041, 3063
Sharp ........................................................ 3049
Sony .................3019, 3026, 3032, 3039, 3040,
............................................. 3055, 3065, 3066
Star Choice............................ 3007, 3024, 3061
STS ........................................................... 3004
Tivo ................................................. 3008, 3063
Toshiba ................................. 3015, 3017, 3043
UltimateTV ................................................. 3009
Uniden ...................................................... 3006
US Digital .................................................. 3011
USDTV ...................................................... 3011
Viewsat ..................................................... 3046
Voom ........................................................ 3007
Zenith ............................................. 3020, 3068
DVR/PVR
(SAT-CAB / AUX 1 / AUX 2 Buttons)
ABS .......................................................... 5016
Alienware .................................................. 5016
Bang & Olufsen.......................................... 5022
CyberPower ............................................... 5016
Dell ........................................................... 5016
DIRECTV............5000, 5001, 5003, 5004, 5005,
................5006, 5007, 5010, 5015, 5017, 5023
Dish Network ................................... 5013, 5014
Dishpro ..................................................... 5013
Echostar .......................................... 5013, 5014
Expressvu .................................................. 5013
Gateway .................................................... 5016
GOI ........................................................... 5013
Hewlett Packard......................................... 5016
HNS .......................................................... 5002
Howard Computers .................................... 5016
HP ............................................................ 5016
HTS........................................................... 5013
Hughes.... 5003, 5004, 5005, 5006, 5007, 5010, 5023
Humax ...................................................... 5010
Hush ......................................................... 5016
iBUYPOWER............................................... 5016
JVC ....................................... 5013, 5014, 5023
Linksys ...................................................... 5016
Media Center PC........................................ 5016
Microsoft ................................................... 5016
Mind ......................................................... 5016
Niveus Media ............................................. 5016
Northgate .................................................. 5016
Panasonic ....................................... 5021, 5026
Philips ......5002, 5007, 5010, 5019, 5023, 5025
Proscan..................................................... 5015
RCA ...................5002, 5011, 5015, 5017, 5023
ReplayTV ......................................... 5018, 5021
Samsung ................................................... 5002
Sonic Blue ....................................... 5018, 5021
Sony ..................5008, 5009, 5016, 5020, 5024
Stack 9 ..................................................... 5016
Systemax .................................................. 5016
Tagar Systems ........................................... 5016
Tivo .........5003, 5004, 5005, 5006, 5008, 5009,
................................... 5010, 5019, 5020, 5023
Toshiba ........................................... 5012, 5016
Touch ........................................................ 5016
UltimateTV ....................................... 5015, 5017
Viewsonic .................................................. 5016
Voodoo ...................................................... 5016
ZT Group ................................................... 5016
Warranty –U.S. and Canada
The Warranty below is valid only for sales to consumers in the United States or Canada.
KLIPSCH, L.L.C. (“KLIPSCH”) warrants this product to be free from defects in materials
and workmanship (subject to the terms set forth below) for a period of one (1) year
from the date of purchase. During the Warranty period, KLIPSCH will repair or replace
(at KLIPSCH’s option) this product or any defective parts (excluding electronics and
amplifiers). For products that have electronics or amplifiers, the Warranty on those
parts is for a period of one (1) years from the date of purchase.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and radiates radio frequency energy and, if not installed and used in
accordance with the instruction, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
To obtain Warranty service, please contact the KLIPSCH authorized dealer from which
you purchased this product. If your dealer is not equipped to perform the repair of your
KLIPSCH product, it can be returned, freight paid, to KLIPSCH for repair. Please call
KLIPSCH at 1-800-KLIPSCH for instructions. You will need to ship this product in either
its original packaging or packaging affording an equal degree of protection.
This device generates and uses radio frequency (RF) energy, and if not installed and used
properly, this equipment may cause interference to radio and television reception.
Proof of purchase in the form of a bill of sale or receipted invoice, which is evidence
that this product is within the Warranty period, must be presented or included to obtain
Warranty service.
This Warranty is invalid if (a) the factory-applied serial number has been altered or
removed from this product or (b) this product was not purchased from a KLIPSCH
authorized dealer. You may call 1-800-KLIPSCH to confirm that you have an unaltered
serial number and/or you purchased from a KLIPSCH authorized dealer.
In accordance with FCC requirements, changes or modifications not expressly approved by
Klipsch could void the user’s authority to operate this product.
If this equipment does cause interference to radio or television reception (which you can
determine by unplugging the unit), try to correct the interference by one or more of the
following measures:
•
Re-orient the receiving antenna (that is, the antenna for the radio or television that
is “receiving” the interference).
•
•
Move the unit away from the equipment that is receiving interference.
Plug the unit into a different wall outlet so that the unit and the equipment receiving
interference are on different branch circuits.
This Warranty is only valid for the original purchaser and will automatically terminate
prior to expiration if this product is sold or otherwise transferred to another party.
If these measures do not eliminate the interference, please consult your dealer or an
experienced radio/television technician for additional suggestions.
This Warranty does not cover cosmetic damage or damage due to misuse, abuse,
negligence, acts of God, accident, commercial use or modification of, or to any part
of, the product. This Warranty does not cover damage due to improper operation,
maintenance or installation, or attempted repair by anyone other than KLIPSCH or a
KLIPSCH dealer which is authorized to do KLIPSCH warranty work. Any unauthorized
repairs will void this Warranty. This Warranty does not cover product sold AS IS or WITH
ALL FAULTS.
Also, the Federal Communications Commission has prepared a helpful booklet, “How To
Identify and Resolve Radio TV Interference Problems.” This booklet is available from the
U.S. Government Printing Office, Washington, DC 20402. Please specify stock number
004-000-00345-4 when ordering copies.
REPAIRS OR REPLACEMENTS AS PROVIDED UNDER THIS WARRANTY ARE THE
EXCLUSIVE REMEDY OF THE CONSUMER. KLIPSCH SHALL NOT BE LIABLE FOR
ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS
OR IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED
BY LAW, THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS
AND IMPLIED WARRANTIES WHATSOEVER, INCLUDING BUT NOT LIMITED TO, THE
WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Some states do not allow the exclusion or limitation of incidental or consequential
damages or implied warranties so the above exclusions may not apply to you. This
Warranty gives you specific legal rights, and you may have other rights, which vary
from state to state.
Warranty Outside the United States and Canada
The Warranty on this product if it is sold to a consumer outside of the United States or
Canada shall comply with applicable law. To obtain any applicable warranty service,
please contact the dealer from which you purchased this product, or the distributor that
supplied this product.
License Notice and Trademark Acknowledgments
• This product is manufactured under license from Dolby Laboratories.
• This product is manufactured under license from Digital Theater Systems, Inc.
• “Dolby”, “ProLogic” and the Double-D Symbol are trademarks of Dolby Laboratories.
• “DTS” and “DTS Digital Out” are trademarks or Digital Theater Systems, Inc.
• HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing, LLC.
FCC Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
This product complies with DHHS Rules 21 CFR Subchapter J. Applicable at the date of
manufacture.
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique
de la classe B est conforme à la norme NMB-003 du Canada.
FCC Declaration Of Conformity
Trade Name:
Product Name:
Model Number:
Responsible Party
Manufacturer:
Address:
Telephone:
Date:
Klipsch Audio Technologies
DVD Audio/Video System
CS-700
Klipsch Audio Technologies
3502 Woodview Trace, Suite 200
Indianapolis, IN 46268
317-860-8100
1/15/2006
These devices were tested and found to comply with Part 15 of the FCC Rules.
Operation is subject to the following conditions: The devices may not cause
harmful interference, and the devices must accept any interference received,
including interference that may cause undesired operation.
CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE
FOR COMPLIANCE WITH THE FCC’S RULES (THE FCC’ THE GRANTEE’) COULD VOID THE
USER’S AUTHORITY TO OPERATE THE EQUIPMENT
CARE/APPENDIX page 27/28
Appendix I - Connection Overview
Understanding the basics of how Input and Output jacks work will assist you in connecting components to your Klipsch system.
Input jacks are connected to peripheral components
Your cable box, satellite box, or HD receiver box would connect to your Klipsch system’s input jacks to bring the signal INTO the Klipsch system so you can control everything (sound and picture)
from the Klipsch system.
Output jacks send the signal OUT from your Klipsch system to the TV (for video) and to the speaker system (for audio)
For instance, in order to see the DVD movie you’re playing in your Klipsch system, you must connect cables to the TV so you can see the picture on the TV screen. Therefore, you connect a
cable to the output jack on the Klipsch system (sending the DVD signal OUT to the TV) and connect the other end of that cable to the matching input jack(s) on the TV.
S-VIDEO
SAT/CABLE/ HD AUDIO INPUT
(1 of 4 video connection options)
Connect to TV's S-VIDEO jack.
COMPOSITE
(1 of 4 video connection options)
Connect to TV's VIDEO INPUT jack (yellow).
COMPONENT VIDEO
(1 of 4 video connection options)
Connect to TV's COMPONENT INPUT
Connect the cable(s) from your set-top box's AUDIO
OUTPUT jack(s) to the AUDIO INPUT jack(s) that
match(es).
ANT. FM (75 W) / AM GND
Connect the supplied FM Antenna and AM
Antenna to get radio reception.
jacks (same color) labeled Y, PB, PR.
HDMI
KlipschCast
Wireless.
(1 of 4 video connection options)
Connect to TV's HDMI INPUT jack.
SPEAKERS (L/R)
Connect supplied
speaker cable.
AUX 1 INPUT — VIDEO IN
SAT/CABLE/HD INPUT
COMPONENT/COMPOSITE
P. (Progressive) SCAN switch
Connect to your set-top box's VIDEO OUTPUT jack(s).
Leave the switch in the OFF position unless
you know your TV and/or set-top box support
progressive scan. Details are on page 12.
Audio Connection Options
DIGITAL COAXIAL / OPTICAL
Connect to your set-top box's
jacks, if available.
Connect video cable (or S-VIDEO, if available) from
component's corresponding VIDEO OUTPUT jack.
AUX 1 INPUT — AUDIO IN
Connect to best available AUDIO OUTPUT jack(s) on
your component (DIGITAL OPTICAL, DIGITAL COAXIAL,
or RIGHT and LEFT)
Cables
Jacks
DIGITAL AUDIO OPTICAL
Not supplied
OPTICAL
DIGITAL AUDIO COAXIAL
Not supplied
COAXIAL
AUDIO RIGHT and LEFT
Supplied
Video Connection Options
COMPONENT Video is considered excellent
video quality because the video is separated
into three parts
Y = Luminance (black & white part of signal)
PB = Chrominance (color) minus blue
PR = Chrominance minus red
S-VIDEO (separate video) provides very good
video quality. Even though there is only one
cable, the chrominance and luminance are kept
separate from the main signal.
COMPOSITE (yellow) provides good video quality.
Cables
OR
Bundled Set
3 Video Grade Cables
Not supplied
L
R
Jacks
COMPONENT
Y
PB
PR
S-VIDEO
S-VIDEO cable
Not supplied
COMPOSITE
COMPOSITE video cable
Supplied
This is a digital connection.
HDMI
HDMI cable
Not supplied
Power
Detail
Emotion
For over 60 years, we’ve made speakers for people who are as passionate about great sound as we are. That’s
why every Klipsch speaker is horn-loaded to create a remarkably accurate listening experience for your music and
movies. From our smallest satellites to our acclaimed professional theater installations, our speakers deliver sound
that’s so lifelike, you have to feel it to believe it.
The ultimate Sound experience
TM
1007598