Husky H4350 Installation Guide

Husky H4350 Installation Guide
Installation
1 Cleaning the air hose
□□ A 3/8" air hose is required, with a maximum length of 25 ft.
□□ Clean the air hose of accumulated dust and moisture
before connecting it to the air supply.
NOTE: If a longer air hose is required, connect a 1/2" air
hose to the 3/8" air hose to ensure the air shear has the
necessary air supply.
2 Connecting to the air supply
Recommended Air Line Set-Up
Part
□□ Always use clean dry air. Excessive moisture and dirt will
greatly reduce the life of any air motor. We recommend the
installation of an in-line filter-regulator-lubricator as close
to the tool as possible.
□□ Ensure all hoses and fittings are the correct size and
secured tightly.
Description
A
Air Shear
B
Quick Plug
C
Quick Coupler
D
Air Hose
E
In-line Regulator
F
In-line Lubricator
G
In-line Filter
H
Air Compressor
5HUSKYTOOLS.COM
Please contact 1-888-43-HUSKY for further assistance.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement