Husky H4820 Installation Guide

Below you will find brief information for Sander Dual Action. The Dual Action Sander is designed for sanding wood, metal and other materials. It comes with a 3/8” air hose and a quick plug for easy connection to an air compressor. An in-line regulator/lubricator is recommended to be used in conjunction with the air compressor.

PDF Download
Document
Husky Dual Action Sander Installation Instructions | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Dual action sanding
  • 3/8” air hose
  • Quick plug for easy connection
  • In-line regulator/lubricator recommended
  • Sanding wood, metal, and other materials

Frequently asked questions

A 3/8” air hose is required, with a maximum length of 25ft.

If a longer air hose is required, connect a 1/2” air hose to the 3/8” air hose to ensure the sander has the necessary air supply.

Always use clean, dry air. Excessive moisture and dirt will greatly reduce the life of any air motor. We recommend the installation of an in-line filter-regulator-lubricator as close to the tool as possible.
Preparing document for printing…
0%