Philips 17PF9945/69I Matchline Flat TV User manual
advertisement
Operating Instructions
17PF9945
23PF9945
17/23PF9945/69 p1 1 3/13/03, 4:43 PM
T
ABLE OF
C
ONTENTS
Safety Information/Precaution ................................................................................................ 3
Hooking Up Your TV Use / Care of Remote Control ....................................................4
Checking the Supplied Accessories ....................................................................................... 5
Dressing the Cables .................................................................................................................. 5
Monting Procedures for LCD TV........................................................................................... 6
Connecting the Audio/Video Sockets (Playback) /(Recording) ...................................... 7 – 8
Connecting the Audio Equipment, Amplifier and Subwoofer ......................................... 9
Connecting the Headphone .................................................................................................... 9
Connecting the FM Radio Mains ............................................................................................ 9
Connecting the PC Equipment ............................................................................................... 10
Connecting the HD (High Definition) Equipment ..............................................................10
Functions of Remote Control .................................................................................................11 – 12
Functions of TV Top Controls ............................................................................................... 13
Accessing the TV Main Menu and Sub-Menus......................................................................14
Overview of TV Main Menu and Sub-Menus .......................................................................14 – 15
Overview of FM Radio Main Menu and Sub-Menus ...........................................................16
Overview of PC Main Menu and Sub-Menus .......................................................................17
Overview of HD Main Menu and Sub-Menus ......................................................................18
Accessing the TV Installation Menu
Choosing the Menu Language and Automatic Tuning of LCD TV Channels ..............19
Manual Tuning of LCD TV Channels ................................................................................... 20
Selecting the Colour/Sound System........................................................................................21
Fine Tuning of LCD TV Channels ..........................................................................................22
Sorting of LCD TV Channels .................................................................................................23
Editing of LCD TV Channels ..................................................................................................24
Naming of LCD TV Channels ................................................................................................25
Using the LCD TV Picture/Sound Menu ...............................................................................26
Accessing the TV Features Installation Menu
Activating the Timer...................................................................................................................27 – 28
Using the Mode Select ..............................................................................................................29
Activating the Child Lock..........................................................................................................30 – 33
Using the Screen Formats ........................................................................................................34
Activating the Sleeptimer.......................................................................................................... 35
Activating the Active Control .................................................................................................35
Activating the TV Smart Picture /Sound Control .............................................................. 36
Using the Teletext...................................................................................................................... 37 – 38
Accessing the FM Radio Installation Menu
Language, Auto Store, Manual Store, Sort, Name ............................................................. 39
Using the FM Radio Sound Menu............................................................................................ 40
Using the FM Radio Smart Sound Control........................................................................... 40
Accessing the FM Radio Features Menu
Activating the Timer...................................................................................................................41
Using the Mode Select ..............................................................................................................42
Activating the Screensaver........................................................................................................42
Accessing the PC Mode ............................................................................................................43
PC Display Setup.........................................................................................................................44
Using the PC Picture-in-Picture Feature............................................................................... 44
PC Modes Support .....................................................................................................................45
Accessing the HD (High Definiton) Mode
Using the HD Picture/Sound Menu ........................................................................................46
Using the HD Mode Select ......................................................................................................47
Using the HD Lock Channel ....................................................................................................47
Before Calling Service (TV Mode) ......................................................................................... 48
Before Calling Service (PC / FM Radio Mode) ....................................................................49
Specifications................................................................................................................................50
2
17/23PF9945/69 p2-6 2 3/13/03, 4:50 PM
S
AFETY
I
NFORMATION
•
Disconnect mains plug when :
– the red light below the TV screen is flashing continuously.
– cleaning the TV screen. Never use abrasive cleaning agents.
– there is a lightning storm.
– the set is left unattended for a prolonged period of time.
•
No naked flame sources, such as lighted candles, should be placed on top of the TV or in the vicinity.
•
Do not place your TV set under direct sunlight or heat.
• Leave at least 5 cm around each side of TV set to allow for proper ventilation.
•
Avoid placing your set (e.g. near the window) where it is likely to be exposed to rain or water.
•
No objects (such as vases) filled with liquids should be placed on top the TV so as to avoid dripping or splashing of liquids on the set.
P
RECAUTION
• Do not shift or move the set around when it is switched on.
• Do not connect AC/DC adaptor to your set that does not originally comes with the set.
Only use recommended part that is approved by Philips manufacturer.
• Caution : Do not use cover or enclose the AC/DC adaptor with any objects like a cloth or box which might shorten the life time of the equipment.
• Do not touch, push or rub the surface with hard object.
• When the surface becomes dusty, wipe gently with absorbent cotton or other soft materials like chamois, soak with petroleum benzene. Do not use acetone, toluene and acohol as it causes chemical damage to the polarizer.
• Wipe off saliva or water droplets as soon as possible. Long time contact with polarizar causes deformations and colour fading.
• Be careful of condensation at sudden temperature change. Condensation does damage to polarizar or electrical contact parts. After condensation fades, smear or spot will occur.
17/23PF9945/69 p2-6
Recycling Directive – To minimise harm to the environment, the batteries supplied with the TV set do not contain mercury or nickel cadmium. If possible, when disposing of batteries, use recycling means available to you. Your TV set uses materials which are reusable or which can be recycled. To minimise the amount of waste in the environment, specialist companies recover used sets for dismantling and collection of reusable materials (contact your dealer).
3
3 3/13/03, 4:50 PM
5 cm
Ñ É
H
OOKING
U
P
Y
OUR
TV (B
ASIC
C
ONNECTION
)
5 cm
5cm
Ñ É
Positioning of the TV set
• Place your TV set on a solid base, strong enough to withstand the weight of the set.
• Leave a space of at least 5 cm around each side of the
TV set to allow for proper ventilation.
ª Do not place TV set near a radiator or other sources of heat.
• Do not place TV set where it can be exposed to rain or excessive moisture.
Antenna Connection
• Connect the aerial plug to the antenna socket
¬ on the backcover.
17/23PF9945/69 p2-6
Mains Connection
• Insert the mains plug into the wall socket. For correct mains voltage, refer to type sticker at the rear of the adaptor.
• Consult your dealer if mains supply is different.
Note : This diagram is not representative of the actual plug and socket.
Switching on the Set
• Press the main power button on the top controls to switch on/off the TV.
• If the set is on standby (indicator is red), press the
Power button on the remote control to switch on set.
U
SE
/C
ARE OF
R
EMOTE
C
ONTROL
• Insert the correct type of batteries into the compartment.
• Ensure the batteries are placed in the right direction.
4
4 3/13/03, 4:50 PM
C
HECKING THE
S
UPPLIED
A
CCESSORIES
The following accessories are supplied together with the LCD set.
i
7
4
1
PC
OK
V
TV
2
5
0
8
6
9 q
3
¬
M
UT
RADIO
P
DV
VC
MODE
æ
SMAR
CONTR
OL
X
ACTIVE g
SM
ART b o v k
Remote Control 2 AA Batteries Antenna Cable Mains Plug
Note : This plug is not representative of the actual plug.
D
RESSING THE
C
ABLES
For better cable management, it is advisable to insert all cables through the hole of the stand as shown in the diagram after connecting to the respective connectors. For connection description, refer to sections on :
– Connecting the Audio/Video Sockets (Playback)
– Connecting the Audio/Video Sockets (Recording)
– Connecting to the Audio Equipment, Amplifier and Subwoofer
– Connecting to the Headphone
– Connecting to the FM Radio Mains
– Connecting the PC Equipment
– Connecting the HD (High Definition) Equipment
5
17/23PF9945/69 p2-6 5 3/13/03, 4:50 PM
M
OUNTING
P
ROCEDURES FOR
LCD TV
If you want to mount the LCD TV on any device, this set has four mounting interfaces fulfilling
VESA specifications.
Screws
Rear of LCD TV
Screws
Stand
1) Lay the LCD TV face-down on a flat surface with a cushion or other soft material to protect the screen.
2) Remove all cables connected on the TV.
3) Remove the four screws and then remove the stand from the LCD TV.
4) Screw in mounting plate. Reconnect all cables to the LCD TV.
You are now ready to mount the device. Below is an example of adjusted ranges and mounting options (VESA compatible).
17/23PF9945/69 p2-6 6
6
3/13/03, 4:50 PM
C
ONNECTING THE
A
UDIO
/V
IDEO
S
OCKETS
(P
LAYBACK
)
You can view the playback of VCR tapes (Video Disc players, camcorders, etc.) by using the
AUDIO and VIDEO INPUT sockets on the rear of the TV.
DC in PC input (VGA)
Rear of TV
R
L Audio in (PC / HD)
HD input
Y Pb Pr
75
Audio out
Monitor out
AV1 in
FM ANT COMP
VIDEO
INPUT
Pr Pb Y
AV1 in
R L
Audio in Video in
– Connect the VIDEO and AUDIO IN sockets on the rear of the LCD TV to the
AUDIO and VIDEO OUT sockets on the VCR.
Rear of VCR
OUT
OUT
ANTENNA
VIDEO R
AUDIO
L
IN
IN IN
OUT
VCR
Side Controls
OUT
VCR (Equipped with Video and
Audio sockets)
OUT
OUT OUT
R AUDIO
L
VIDEO S-VIDEO ANTENNA
IN IN IN
Back of S-VHS VCR
Camcorder
–
–
The S-Video connection on the Side of the LCD TV is used for the playback of
S-VHS VCR tapes, Video Discs, Video
Games or Compact Disc-Interactive (cd-i) discs. Better picture detail and clarity is possible with the S-Video playback as compared to the picture from a normal antenna (RF) connection.
– Connect the S-VIDEO socket on the side of the LCD TV to the S-VHS OUT socket on a S-VHS VCR.
– Connect the AUDIO IN sockets from the rear of the TV to the AUDIO OUT sockets on the VCR. Note : You need not connect the VIDEO IN socket of the
LCD TV if S-VIDEO IN socket is connected.
For more convenient direct playback connections, the Side Audio/Video Input sockets allow for quick and easy connections, particularly Camcorder tape recordings.
Connect the S-VIDEO socket (if available) from the Camcorder to the
Side S-VIDEOsocket of the TV. You need not connect the Side VIDEO IN socket of the TV if the S-VIDEO socket is connected.
Connect the AUDIO OUT sockets
(Right and Left) from the Camcorder to the Side AUDIO IN sockets.
7
17/23PF9945/69 p7-13 7 3/13/03, 4:51 PM
C
ONNECTING THE
A
UDIO
/V
IDEO
S
OCKETS
(P
LAYBACK
)
DVD (Equipped with "Y", "Pb" and "Pr" and Output sockets)
DC in PC input (VGA)
L Audio in (PC / HD)
HD input
R
75
Y Pb Pr
Audio out
Monitor out
AV1 in
FM ANT COMP
VIDEO
INPUT
Pr Pb Y
AV1 in
R L
Audio in Video in
Y Pb
Pr L AUDIO R
You can view the playback of DVD discs by using the COMPONENT VIDEO INPUT sockets at the rear of the LCD TV.
– Connect the “Y”, “Pb” and the “Pr” sockets at the rear of the LCD TV to the “Y”, “Pb” and “Pr” OUTPUT sockets of the DVD player to view playback of DVD discs.
C
ONNECTING THE
A
UDIO
/V
IDEO
S
OCKETS
(R
ECORDING
)
Side Sockets
Connection for recording from the TV channel
– Connect the corresponding INPUT sockets of the VCR to the MONITOR
OUTPUT sockets at the rear of the
LCD TV.
OUT
ANTENNA
IN
OUT
VCR (Equipped with Video and
Audio sockets)
OUT
VIDEO
R AUDIO
L
IN
IN
VCR
17/23PF9945/69 p7-13
Side Sockets
OUT
OUT OUT
ANTENNA
IN
VCR (Equipped with Video and
Audio sockets)
VIDEO R
AUDIO
L
IN
IN
OUT
ANTENNA
IN
VCR 1
OUT OUT
VIDEO
R AUDIO
L
IN
IN
VCR 2
Connection for recording from one VCR to another VCR
– Connect the sockets of the VCR which you want to record from, to the corresponding sockets at AV2.
– Connect the sockets of the receiving VCR to the MONITOR OUTPUT sockets at the side of the LCD TV.
8
8 3/13/03, 4:51 PM
C
ONNECTING TO THE
A
UDIO
E
QUIPMENT
, A
MPLIFIER AND
S
UBWOOFER
SUBWOOFER
SPEAKERS
L R
Side Controls
Connect the audio cable to the audio input of your audio equipment and to AUDIO L and R at the rear of the TV
If you have a subwoofer, connect the cable from Subwoofer Out socket to an external amplifier.
You can listen to your TV sound via your
audio equipment.
Note : If you want to connect more equipment to your TV, consult your dealer.
C
ONNECTING TO THE
H
EADPHONE
SIDE CONTROLS
(EXTERNAL 2)
Insert the plug into the headphone soket
; at the Side sockets of the LCD TV.
To FM
Radio
Mains
17/23PF9945/69 p7-13
C
ONNECTING TO THE
FM R
ADIO
M
AINS
Rear of TV
L
Audio in (PC / HD)
HD input
75 FM ANT COMP
Pr
VIDEO
INPUT
Pb
AV1 in R
L
Audio in
Y
Video in DC in PC input (VGA)
R
Y Pb Pr
Audio out
Monitor out
AV1 in
To enable you to access FM radio mode in the TV, you must connect from FM Antenna socket to the
FM Radio mains.
9
9 3/13/03, 4:51 PM
To Mains
C
ONNECTING THE
PC E
QUIPMENT
Adaptor
DC in PC input (VGA)
R
Rear of TV
L
Audio in (PC / HD)
HD input
75
Y Pb Pr
Audio out
Monitor out
AV1 in
FM ANT
COMP
VIDEO
INPUT
Pr Pb Y
AV1 in
R L
Audio in Video in
To enable you to access PC mode in the TV, you must connect the following :
– Connect adaptor from DC in to the mains.
– Connect the PC input (VGA) to the Monitor Output of your PC
– Connect Audio L and R output of your PC to the Audio IN L and R of your LCD TV.
C
ONNECTING THE
HD (H
IGH
D
EFINITION
) E
QUIPMENT
Rear of TV
DC in PC input (VGA)
L Audio in (PC / HD)
HD input
R
75
Y Pb Pr
Audio out
Monitor out
AV1 in
FM ANT COMP
VIDEO
INPUT
Pr
Pb
AV1 in R
L
Audio in
Y
Video in
DVD (Equipped with "Y", "Pb" and "Pr" and Output sockets)
17/23PF9945/69 p7-13
AUDIO VIDEO
OUTPUT
Back of DVD player
â–²
OR
â–¼
OUTPUT
HDTV Set-Top Box
10
– Connect the “Y”, “Pb and the “Pr” sockets of the
HD INPUT at the rear of the LCD TV to the
“Y”, “Pb” and “Pr” OUTPUT sockets of the
DVD player.
– Connect Audio L and R OUTPUT of your
Set-top box to the Audio IN L and R of HD
INPUT of the LCD TV.
10
3/13/03, 4:51 PM
F
UNCTIONS OF
R
EMOTE
C
ONTROL
& POWER button
– Switch set off to standby mode. To switch on set from standby mode, press Channel +/– , Digit (0 -9) or Power button.
é MODE button/VCR and DVD indicators
Press the Mode button repeatedly to choose between VCR or DVD mode. The VCR or DVD indicator will light up if selected. Once VCR or DVD mode is selected, it allows you access to the Record, Play, Stop, Pause, Forward and Rewind functions for your VCR or DVD player. Note : The set will switch to TV mode if there is no activity on any of the
VCR/DVD buttons after 20 seconds.
“ VCR/DVD buttons
VCR/DVD buttons allows you access to the Record, Play,
Stop, Forward and Rewind functions for your VCR or DVD player (Applicable to only certain models of PHILIPS). For these functions to be enabled, you must select VCR or DVD mode by the MODE button.
‘ SLEEPTIMER button
It allows you to select a time period after which the set will switch to standby mode automatically. (Refer to section on
“Activating the Sleeptimer”
( 4
– When in TV mode, it allows you to switch from Stereo to Mono sound during stereo transmission or to choose between language
5or language6during dual sound transmission.
– When in teletext mode, allows you to display dual page text.
&
é
“
‘
(
§
è
!
ç
0
1
2
3
VCR
DVD
SMART
MENU
V
OK
PC
1
4
7 i
§ SMART SOUND button
Press the Smart Sound button repeatedly to access 4 different types of sound settings and choose your desired setting.
è MENU button
Displays the main menu. Also exits menu from screen.
! CURSOR LEFT/UP button
– Cursor Left button allows you to select the sub-menus and adjust the settings.
– Cursor Up button allows you to select the next item on the menu.
MODE
æ
X
TV
ACTIVE
MUTE
¬
2
5
8
0 v o g
CONTROL
HD
2
A/CH b
SMART k q
CH
RADIO
9
3
6
ç VOLUME + / – button
Increases or decreases volume.
0 TV button
When you are in PC, HD or FM Radio mode, press this button to enter into TV mode.
1 PC button
When you are in TV, HD or FM Radio mode, press this button to enter into PC mode.
2 INDEX/OSD button
– When in teletext mode, it functions as an Main Index button (Refer to section on
“Using the Teletext).
– When in TV mode, press to exit on-screen menu. Also displays information like current channel number, sound mode, etc..
3 FORMAT / TIMER (VCR) button
In TV mode, it allows to select your desired screen format. Refer to section on (“Using the Screen Format”). Also allows you timer function in VCR mode.
11
17/23PF9945/69 p7-13 11 8/15/03, 1:32 PM
F
UNCTIONS OF
R
EMOTE
C
ONTROL
4 AV / TELETEXT button
– In TV mode, it allows you to select the AV channels.
– In Teletext mode, it allows to access teletext information.
(Refer to section on “Using the Teletext”)
4
5 PICTURE-IN-PICTURE ON/OFF button
– When in PC mode, it allows you to call up a sub-screen within your main screen enabling you to watch a TV channel.
5
6
6 PICTURE-IN-PICTURE POSITION button
– When in PC mode, it allows you to position the sub-screen to be on the top left, top right, bottom right or the bottom left corner of your screen.
7 ALTERNATE CHANNEL button
Allows to alternate between the current channel and the previous channel.
25
8 TELETEXT / HOLD button
– In teletext mode, it allows you to access teletext information (Refer to section on “Using the Teletext”) .
– In VCR or DVD mode, it serves as a pause function for your VCR or DVD player.
9
1 TELETEXT button
Allows to access teletext mode.
1 SMART PICTURE button
Press the Smart Picture button repeatedly to access 5 different types of picture settings and choose your desired setting.
VCR
DVD
SMART
MENU
V
OK
PC
1
4
7 i
MODE
æ v o
2
A/CH
X
ACTIVE g
TV
CONTROL
MUTE
¬
2
5
8
0
HD b
SMART k q
CH
RADIO
9
3
6
21
ACTIVE CONTROL button
Adjusts settings automatically for optimal picture quality under any signal conditions (Refer to section on “Using the Active Control”)
22
SURROUND SOUND button
– Allows you to select Incredible Surround, Dolby Virtual Surround and Stereo sound when transmission is in stereo mode.
– Allows you to select Spatial Sound or Mono sound when transmission is in mono mode.
7
24
26
27
28
8
9
20
21
22
23
23
CURSOR RIGHT / DOWN buttons
– Cursor Right button allows you to access the sub-menus adjust the settings.
– Cursor Down button allows you to select the next item on the menu.
24
25
CHANNEL + / – buttons
Allows you to select channels in ascending or descending order.
MUTE button
Mutes sound. To restore sound, press button again.
26
27
28
RADIO button
Allows to access radio mode. (Refer to section on “Accessing the FM Radio Installation
Menu ”)
HD (High Definition) button
Allows you to select the High definition mode when the “Y”, “Pb and the “Pr” sockets at the HD INPUT at the rear of the LCD TV are connected to the to the “Y”, “Pb” and
“Pr” OUTPUT sockets of the DVD player.
DIGIT (0 -9) buttons
Allows you select a channel. Note : For a 2-digit number, the second digit must be entered before the “–” sign disappears.
12
17/23PF9945/69 p7-13 12 5/6/03, 2:26 PM
F
UNCTIONS OF
TV T
OP
C
ONTROLS
é & “
‘
&
Mains Power button
é
Volume
–
/
+
buttons
“
Channel
–
/
+
buttons
‘
Remote Sensor
Switch mains power on or off.
Adjust sound volume softer/louder.
Select channel in descending/ascending order.
Acts as a sensor for activating the controls of the
TV when remote control handset is aimed at it.
Note
• You can enter the main menu by pressing both the Volume
- and+buttons at the same time.
• Press the Channel
+
or
–
button to select the next item on the menu.
• Press Volume
+
or
–
button to access sub-menu and adjust the settings.
13
17/23PF9945/69 p7-13 13 3/13/03, 4:51 PM
A
CCESSING THE
TV M
AIN
M
ENU AND
S
UB
-M
ENUS
The TV main menu allows you to access to the Picture, Sound, Features and Install menus
How to call up the main menu
Press the
MENU
(MENU) button to enter the main menu.
The 4 buttons , , and (Cursor
Up, Down, Left and Right) on the remote control allow you to select the desired menu item, make adjustments and access the sub-menus. Use the i
(OSD) button to exit menu from screen.
•
PICTURE
•
SOUND
LANGUAGE
AUTO STORE
•
FEATURES MANUAL STORE
•
É
INSTALL SORT
CHANNEL EDIT
O
VERVIEW OF
TV M
AIN
M
ENU AND
S
UB
-M
ENUS
Third Level Fourth Level First Level Second Level
PICTURE
Brightness
Colour
Contrast
Sharpness
Colour Temperature Cool
Normal
Warm
SOUND
Incredible Picture
Equalizer 120Hz
500Hz
....... etc.
FEATURES
Balance
AVL
Incredible Surround
Timer
Mode Select
Time
Start Time
Stop Time
Channel
Activate
Display
FM Radio
HD
PC
Child Lock
Widescreen
14
17/23PF9945/69 p14-18 14 8/15/03, 1:34 PM
......... O
VERVIEW OF
TV M
AIN
M
ENU AND
S
UB
-M
ENUS
Fourth Level First Level Second Level
INSTALL
Language
Auto Store
Manual Store
Sort
Channel Edit
Name
Third Level
English
B. Melayu
Search
Colour System
Sound System
Search
Channel
Store
Fine Tune
From
To
Exchange
Skipped
Personal
Auto
PAL
.... etc
Auto
B/G
.... etc
17/23PF9945/69 p14-18 15
15
8/15/03, 1:34 PM
O
VERVIEW OF
FM R
ADIO
M
AIN
M
ENU AND
S
UB
-M
ENUS
This TV also provides you with the FM RADIO for your listening pleasure. To enable you to access the FM RADIO mode, you must connect the cable from FM Rntenna socket to the
FM Radio mains. Press
RADIO
(FM RADIO) button to enter into FM Radio mode.
Here is an overview of the FM RADIO Main menu and Sub-menus
Fourth Level First Level Second Level
SOUND
Equalizer
Third Level
120HZ
500HZ
....... etc.
Balance
AVL
Incredible Surround
FEATURES
Timer Time
Start Time
Stop Time
Channel
Activate
Display
TV
HD
PC
Mode Select
Screensaver
INSTALL
Language
Auto Store
Manual Store
Sort
Name
16
English
B. Melayu
Search
Search
Channel
Store
From
To
Exchange
Personal
17/23PF9945/69 p14-18 16 3/13/03, 4:56 PM
O
VERVIEW OF
PC M
ENU AND
S
UB
-M
ENUS
This TV also allows you use your TV as a PC monitor. To enable you to access PC mode in the
TV, you must connect the following :–
& Connect DC input terminal to the AC adaptor.
é Connect the Mains Plug from the AC adaptor to the AC outlet.
“ Connect the PC input (VGA) to the Monitor Output of your PC.
‘ Connect Audio L and R output of your PC to the Audio in (PC) L and R of your TV.
( Press
PC
button to enter into PC mode.
§ Press
MENU
button to enter into the PC Main Controls Menu.
First Level Second Level Third Level Fourth Level
AUDIO SELECTION
BRIGHTNESS &
CONTRAST
ADJUST COLOR
PC
TV/Source/FM Radio
Brightness
Contrast
Color Temp Normal
Warm
Cool
Personal Red
Green
Blue
VIDEO NOISE
ADJUST POSITION
AUTO ADJUST
Phase
Clock
Horizontal
Vertical
Save
PIP CONTROLS
PIP Switch
Yes
No
Off
On Size
Position
MODE SELECT
TV Mode
FM Radio Mode
HD Mode
RESET TO FACTORY
No
SETTINGS
Yes
VIEW FORMATS
Native
Wide Screen
17
17/23PF9945/69 p14-18 17 8/15/03, 1:35 PM
O
VERVIEW OF
HD M
ENU AND
S
UB
-M
ENUS
The HD (High Definition) mode offers you Picture and Sound adjustments, Mode Select and
Lock Channel feature.
First Level Second Level
PICTURE
Brightness
Color
Contrast
Sharpness
Hue
Color Temperature
Third Level Fourth Level
SOUND
Format
Equalizer
Cool
Normal
Warm
Full SCreen
Wide Screen
120Hz
500Hz
....... etc.
MODE
SELECT
Balance
AVL
TV Mode
FM Radio Mode
PC Mode
LOCK
CHANNEL
17/23PF9945/69 p14-18 18
18
8/15/03, 1:35 PM
A
CCESSING THE
LCD TV I
NSTALLATION
M
ENU
Before you access the TV installation menu, ensure you are in TV mode. If you are not in TV mode, press the
TV
(TV) button on the remote control to enter into TV mode.
MENU k
MENU k
MENU k
INSTALL
Ñ
LANGUAGE
•
AUTO STORE
•
MANUAL STORE
•
SORT
•
CHANNEL EDIT
•
â–²
•
É
ENGLISH
B.MELAYU
â–¼
1. Enter main menu.
2. Select INSTALL.
3. Enter Install menu.
C
HOOSING THE
M
ENU
L
ANGUAGE AND
A
UTOMATIC
T
UNING OF
LCD TV C
HANNELS
The Language menu allows you to set the TV’s on-screen menu to be shown in your desired language.
Press Button
Result on Screen
or
4. Enter LANGUAGE mode.
5. Select desired language.
6 Exit LANGUAGE mode.
INSTALL
Ñ
LANGUAGE
•
AUTO STORE
•
MANUAL STORE
•
SORT
•
CHANNEL EDIT
•
â–²
•
É
ENGLISH
B.MELAYU
â–¼ i
7. Select AUTO STORE.
8. Start automatic tuning.
9. When automatic tuning of channels is completed, exit menu from screen.
INSTALL
•
LANGUAGE
Ñ
AUTO STORE
•
MANUAL STORE
•
SORT
•
CHANNEL EDIT
•
â–²
•
É
SEARCH
â–¼
INSTALL
Ñ
•
LANGUAGE
â–²
•
AUTO STORE
•
É
SEARCHING
Ñ
MANUAL STORE PLEASE WAIT
•
SORT CHANNEL FOUND 8
•
CHANNEL EDIT 048.31 MHZ
â–¼
19
17/23PF9945/69 p19-26 19 3/13/03, 4:52 PM
A
CCESSING THE
LCD TV I
NSTALLATION
M
ENU
M
ANUAL
T
UNING OF
LCD TV C
HANNELS
Manual tuning allows you to store each programmes manually.
MENU k
MENU k
MENU k
INSTALL
Ñ
LANGUAGE
•
AUTO STORE
•
MANUAL STORE
•
SORT
•
CHANNEL EDIT
•
â–²
•
É
ENGLISH
B.MELAYU
â–¼
1. Enter main menu.
2. Select INSTALL.
3. Enter Install menu.
Press Button
4.
Press button repeatedly until
MANUAL STORE is selected.
5.
Enter MANUAL STORE menu.
1
4
7
2
5
8
0
3
6
9
6.
7.
Start manual tuning. Searching stops
8.
9.
Select SEARCH.
once a transmitting channel is found.
Select CHANNEL.
Key in the desired channel number.
10. Select STORE.
11. Store tuned channel.
Result on Screen
INSTALL
MANUAL STORE
â–²
•
COLOUR SYSTEM
•
•
SOUND SYSTEM
•
É
196.23MHZ
Ñ
SEARCH
•
CHANNEL
•
STORE
â–¼
INSTALL
MANUAL STORE
â–²
•
COLOUR SYSTEM
•
•
SOUND SYSTEM
•
É
196.23MHZ
Ñ
SEARCH
•
CHANNEL
•
STORE
â–¼
INSTALL
MANUAL STORE
â–²
•
COLOUR SYSTEM
•
•
SOUND SYSTEM
•
SEARCH
Ñ
CHANNEL
•
STORE
•
É
18
•
â–¼
INSTALL
MANUAL STORE
•
COLOUR SYSTEM
•
•
SOUND SYSTEM
•
SEARCH
â–²
•
CHANNEL
Ñ
STORE
•
É
STORED
â–¼ i
12. Exit menu from screen.
20
17/23PF9945/69 p19-26 20 3/13/03, 4:52 PM
A
CCESSING THE
LCD TV I
NSTALLATION
M
ENU
S
ELECTING THE
C
OLOUR
/S
OUND
S
YSTEM
This feature allows you to select your desired COLOUR and SOUND system. If AUTO is selected, the respective colour and sound system will be automatically selected according to the transmission system. Note : Select your desired colour and sound system manually if reception is poor at AUTO mode. If the colour system is selected manually, that is, AUTO is not selected, the sound system selected should also not be AUTO and vice versa.
Press Button Result on Screen
Repeat step 1 to step 5 as in “MANUAL TUNING OF CHANNELS”
or
6.
COLOUR SYSTEM is selected.
Enter COLOUR SYSTEM mode.
7.
Select the desired colour system.
INSTALL
MANUAL STORE
Ñ
COLOUR SYSTEM
• •
SOUND SYSTEM
•
SEARCH
•
CHANNEL
•
STORE
â–²
•
É
AUTO
PAL
SECAM
â–¼
8.
Exit from colour system mode.
or
9.
Proceed to select the SOUND
SYSTEM.
10. Enter SOUND SYSTEM mode.
11. Select the desired sound system.
12. Exit from sound system mode.
13. Press button repeatedly until
STORE is selected.
14. Store selected system.
INSTALL
MANUAL STORE
•
COLOUR SYSTEM
Ñ
SOUND SYSTEM
•
SEARCH
•
CHANNEL
•
STORE
â–²
•
AUTO
B/G
B/K
â–¼
INSTALL
MANUAL STORE
•
COLOUR SYSTEM
Ñ
SOUND SYSTEM
•
SEARCH
•
CHANNEL
•
STORE
â–²
•
É
AUTO
B/G
D/K
â–¼
INSTALL
MANUAL STORE
â–²
•
COLOUR SYSTEM
•
•
SOUND SYSTEM
•
SEARCH
•
CHANNEL
Ñ
STORE
•
É
â–¼
INSTALL
MANUAL STORE
â–²
•
COLOUR SYSTEM
•
•
SOUND SYSTEM
•
SEARCH
•
CHANNEL
Ñ
STORE
•
É
STORED
â–¼ i
15. Exit menu from screen.
21
17/23PF9945/69 p19-26 21 8/15/03, 1:37 PM
A
CCESSING THE
LCD TV I
NSTALLATION
M
ENU
F
INE
T
UNING OF
LCD TV C
HANNELS
This feature allows you to adjust picture reception in areas of weak reception.
MENU k
MENU k
MENU k
INSTALL
Ñ
LANGUAGE
•
AUTO STORE
•
MANUAL STORE
•
SORT
•
CHANNEL EDIT
•
â–²
•
É
ENGLISH
B.MELAYU
â–¼
1. Enter main menu.
2. Select INSTALL.
3. Enter Install menu.
Press Button
4. Press button repeatedly until
MANUAL STORE is selected.
5.
Enter MANUAL STORE menu.
or
6. Press button repeatedly until
FINE TUNE is selected.
7. Start fine-tuning until desired picture and sound is obtained.
8. Select Store.
9.
Store last fine-tuned status.
Result on Screen
INSTALL
MANUAL STORE
Ñ
COLOUR SYSTEM
•
SOUND SYSTEM
•
SEARCH
•
CHANNEL
•
STORE
â–²
•
É
AUTO
•
PAL
SECAM
â–¼
INSTALL
MANUAL STORE
•
SOUND SYSTEM
•
SEARCH
•
CHANNEL
•
STORE
Ñ
FINE TUNE
â–²
â–¼
É
INSTALL
MANUAL STORE
â–²
•
COLOUR SYSTEM
•
•
SOUND SYSTEM
•
SEARCH
•
CHANNEL
Ñ
STORE
•
É
STORED
â–¼ i
10. Exit menu from screen.
22
17/23PF9945/69 p19-26 22 8/15/03, 1:37 PM
A
CCESSING THE
LCD TV I
NSTALLATION
M
ENU
S
ORTING OF
LCD TV C
HANNELS
This menu allows you to change channel number of your choice for a particular station.
MENU k MENU k
MENU k
INSTALL
Ñ
LANGUAGE
•
AUTO STORE
•
MANUAL STORE
•
SORT
•
CHANNEL EDIT
•
â–²
•
É
ENGLISH
B.MELAYU
â–¼
1. Enter main menu.
2. Select INSTALL.
3. Enter Install menu.
Press Button
4. Press button repeatedly until
SORT is selected.
Result on Screen
INSTALL
•
LANGUAGE
•
AUTO STORE
•
MANUAL STORE
•
É
â–¼
SORT
•
CHANNEL EDIT
FROM
TO
EXCHANGE
1 2
4 5 6
7 8
3
9
0
1
4
7
2
5
8
0
3
6
9 i
5. Enter SORT menu.
6. Key in the channel number in the
FROM column, that is the channel you want to swap from.
7. Select TO.
8. Key in the channel number in the
TO column, that is, the channel you want to swap to.
9. Select EXCHANGE.
10. Activate exchange of channels.
11. Exit menu from screen.
INSTALL
SORT
Ñ FROM
•
TO
•
EXCHANGE
â–²
•
É
â–¼
INSTALL
SORT
•
FROM
Ñ
TO
•
EXCHANGE
â–²
•
É
â–¼
8
6
INSTALL
SORT
•
FROM
•
TO
Ñ
EXCHANGE
â–²
•
É
EXCHANGED
â–¼
23
17/23PF9945/69 p19-26 23 3/13/03, 4:52 PM
A
CCESSING THE
LCD TV I
NSTALLATION
M
ENU
E
DITING OF
LCD TV C
HANNELS
This feature allows you to edit or skip channels which have bad or weak TV signal or channels that you do not watch often.
Note : Once a channel is skipped, you cannot have access to it by the CHANNEL + or – button. You can only access the channel by the DIGIT (0 -9) button.
MENU k
MENU k
MENU k
INSTALL
Ñ
LANGUAGE
•
AUTO STORE
•
MANUAL STORE
•
SORT
•
CHANNEL EDIT
•
â–²
•
É
ENGLISH
B.MELAYU
â–¼
1. Enter main menu.
2. Select INSTALL.
3. Enter Install menu.
Press Button
Result on Screen
i
or
4. Press button repeatedly until
CHANNEL EDIT is selected.
5. Enter channel edit mode.
6. Select the channel you want to skip.
7. Activate skipped mode.
8. Exit menu from screen.
INSTALL
•
LANGUAGE
•
AUTO STORE
•
MANUAL STORE
•
SORT
Ñ
CHANNEL EDIT
6
•
É
7
3
4
5
INSTALL
•
LANGUAGE
•
AUTO STORE
•
MANUAL STORE
•
SORT
Ñ
CHANNEL EDIT
6
•
É
7
3
4
5
INSTALL
•
LANGUAGE
•
AUTO STORE
•
MANUAL STORE
•
SORT
Ñ
CHANNEL EDIT
3
4
5
6
•
É
7 SKIPPED
How to add back channels
• Repeat steps 1 to 5 as in “Editing of Channels”.
• Select the channel you want to add back by the (CURSOR UP) or
(CURSOR DOWN) button.
• Press the (CURSOR RIGHT) button to activate adding back of channel.
• Exit menu from screen by the i
(OSD) button.
24
17/23PF9945/69 p19-26 24 3/13/03, 4:52 PM
A
CCESSING THE
LCD TV I
NSTALLATION
M
ENU
N
AMING OF
LCD TV C
HANNELS
This feature allows you to enter a new name or modify an existing name of a channel for 40 programmes (from 1 to 40) including external channels.
MENU k
MENU k
MENU k INSTALL
Ñ
LANGUAGE
•
AUTO STORE
•
MANUAL STORE
•
SORT
•
CHANNEL EDIT
•
â–²
•
É
ENGLISH
B.MELAYU
â–¼
1. Enter main menu.
2. Select INSTALL.
3. Enter Install menu.
Press Button
4.
Press button repeatedly until
NAME is highlighted.
or
or
MENU i
17/23PF9945/69 p19-26
5.
Enter NAME mode.
6.
Select desired preset name and press (CURSOR RIGHT) button to store selected pre-set name.
7.
If you select PERSONAL, move to first character slot
8.
Press button repeatedly to cycle through the characters and select desired character. Move to next character slot by the
(CURSOR RIGHT) button and key in the next character.
(You can enter up to a maximum of 5 characters)
9.
Store named channel.
10. Exit menu from screen.
25
25
Result on Screen
INSTALL
•
AUTO STORE
•
MANUAL STORE
•
SORT
•
CHANNEL EDIT
Ñ
NAME
â–²
â–²
•
É
8
INSTALL
•
AUTO STORE
•
MANUAL STORE
•
SORT
•
CHANNEL EDIT
Ñ
NAME
•
É
PERSONAL
INSTALL
•
AUTO STORE
•
MANUAL STORE
•
SORT
•
CHANNEL EDIT
Ñ
NAME
â–²
•
É
_
INSTALL
•
AUTO STORE
•
MANUAL STORE
•
SORT
•
CHANNEL EDIT
Ñ
NAME
â–¼
â–²
•
É
BBC_1
â–¼
INSTALL
•
AUTO STORE
•
MANUAL STORE
•
SORT
•
CHANNEL EDIT
Ñ
NAME
•
PERSONAL
8/15/03, 1:38 PM
U
SING THE
LCD TV P
ICTURE
/S
OUND
M
ENU
The picture and sound menus allow you to make adjustments to the picture and sound. It also allow you to select and activate other features in the menu.
1. Press the
MENU
(MENU) button to enter main menu.
2. Use the (CURSOR UP/DOWN) buttons to select the items on the
PICTURE/SOUND menu.
3. Use the (CURSOR LEFT/RIGHT) buttons to access the sub-menus.
Picture menu items
Brightness
Colour
Contrast
Sharpness
Colour Temp
Incredible
Picture
Activities
Increase or decrease brightness level.
Increase or decrease color level.
Increase or decrease contrast level until lightest parts of the picture show good detail.
Increase or decrease sharpness level to improve detail in the picture.
Allows you a choice of 3 picture settings
(NORMAL, WARM and COOL).
Select “ON” to allow you to optimise the total contrast for improved picture quality.
PICTURE
â–²
Ñ
BRIGHTNESS
•
COLOUR
•
CONTRAST
•
SHARPNESS
•
COLOUR TEMP
•
PICTURE
É
38
•
COLOUR
•
CONTRAST
•
SHARPNESS
•
COLOUR TEMP COLOUR
Ñ
INCR.PICTURE
•
É
•
ON
Note : HUE feature is only applicable to NTSC programmes. The HUE item will not appear on the menu if programme is in PAL mode.
Sound menu items
Equalizer
Activities
Allows you a choice of different sound frequencies.
BALANCE Increase or decrease to adjust balance level.
AVL As variation in signal conditions can result
(Auto Volume a sudden change in volume during in
Leveller) commercial breaks or channel switching, selecting the “ON” function will enable the volume to remain at a standard volume level.
Incredible
Surround
Allows you to select between Stereo,
Dolby Virtual and Incredible Surround sound. when transmission is in stereo.
Allows you to select between Spatial and
Mono sound when transmission is in mono.
SOUND
â–²
•
É
EQUALIZER
•
BALANCE
•
AVL
•
INCR.SURROUND
•
120HZ
500HZ
1500HZ
5KHZ
10KHZ
26
17/23PF9945/69 p19-26 26 8/15/03, 1:38 PM
A
CCESSING THE
LCD TV F
EATURES
M
ENU
A
CTIVATING THE
T
IMER
The Timer feature allows you to set the timer to switch to another channel at a specified time while you are watching another channel or when the TV is on standby mode.
Note : For the timer to function, the set must not be switched off. Once the set is switched off, the timer is disabled.
k k k
MENU MENU
MENU
FEATURES
•
â–¼
É
TIMER TIME
•
MODE SELECT START TIME
•
CHILD LOCK STOP TIME
•
WIDE SCREEN CHANNEL
ACTIVATE
1. Enter main menu. 2. Select FEATURES. 3. Enter FEATURES menu.
Press Button
4. Enter the TIMER menu.
1
4
7
2
5
8
0
3
6
9
MENU
1
4
7
2
5
8
0
3
6
9
MENU
Result on TV Screen
5. Enter TIME mode.
6. Key in the current time For example, if the current time is 12:30, key digit 1 and
2 in the hour column, followed by digit
3 and 0 in the minute column.
7. Exit from TIME mode.
8. Select START TIME.
9. Enter the START TIME mode.
10. Key in the time you want the programme to be switched on.
11. Exit from START TIME mode.
12 Select STOP TIME.
FEATURES
TIMER
Ñ
TIME
•
START TIME
•
STOP TIME
•
CHANNEL.
•
ACTIVATE
FEATURES
TIMER
â–²
•
É
12:30
â–¼
Ñ
TIME
•
START TIME
•
STOP TIME
•
CHANNEL
•
ACTIVATE
â–²
•
É
--:--
FEATURES
TIMER
•
TIME
START TIME
Ñ
•
STOP TIME
•
CHANNEL
•
ACTIVATE
â–²
•
É
--:--
FEATURES
TIMER
TIME
â–²
Ñ
•
START TIME
•
STOP TIME
•
É
13:30
â–¼
•
CHANNEL
•
ACTIVATE
FEATURES
TIMER
•
TIME
•
START TIME
Ñ
STOP TIME
•
CHANNEL
•
ACTIVATE
â–²
•
É
--:--
27
17/23PF9945/69 p27-38 27 3/13/03, 4:47 PM
A
CCESSING THE
LCD TV F
EATURES
M
ENU
......... A
CTIVATING THE
T
IMER
Press Button
Result on TV Screen
1
4
7
2
5
8
0
3
6
9
MENU
1
4
7
2
5
8
0
3
6
9 i
13. Enter STOP TIME mode.
14. Key in the time you want the programme to be switched off.
15. Exit from STOP TIME mode.
16. Select CHANNEL.
17. Key in the channel you want to switch to.
18. Select ACTIVATE.
19. Activate timer. You can select to activate timer by DAILY or
ONCE mode.
20. Select DISPLAY.
21 Select ON mode if you want to display the current time on the
TV screen.
22. Exit menu from screen.
FEATURES
TIMER
•
TIME
•
START TIME
Ñ
STOP TIME
•
CHANNEL
•
ACTIVATE
â–²
•
É
15:30
â–¼
FEATURES
TIMER
•
TIME
•
START TIME E
•
STOP TIME
Ñ
CHANNEL
•
ACTIVATE
â–²
•
É
â–¼
â–¼
FEATURES
TIMER
•
TIME
•
START TIME E
•
STOP TIME
Ñ
CHANNEL
•
ACTIVATE
â–²
•
É
â–¼
â–¼
3
8
FEATURES
TIMER
•
TIME
•
START TIME E
•
STOP TIME
•
PROG. NO
Ñ
ACTIVATE
â–²
•
É
ONCE
FEATURES
TIMER
•
START TIME
•
STOP TIME E
•
CHANNEL
•
ACTIVATE
Ñ
DISPLAY
â–²
•
É
ON
Note
30 seconds before the timer is activated, a message indicating the time left for the channel switch will appear on the screen. To disable the channel switch, press any button on the remote control.
28
17/23PF9945/69 p27-38 28 3/13/03, 4:47 PM
A
CCESSING THE
LCD TV F
EATURES
M
ENU
U
SING THE
M
ODE
S
ELECT
This menu allows you to go into FM RADIO, HD or PC mode.
k
MENU k MENU k
MENU
FEATURES
•
É
TIMER
•
MODE SELECT
•
CHILD LOCK
•
WIDE SCREEN
TIME
START TIME
STOP TIME
CHANNEL
ACTIVATE
1. Enter main menu. 2. Select FEATURES. 3. Enter FEATURES menu.
Press Button
4. Select MODE SELECT.
Result on TV Screen
FEATURES
•
TIMER
Ñ
MODE SELECT
•
CHILD LOCK
•
WIDE SCREEN
•
É
FM RADIO
HD
PC
â–¼
or
5.Enter MODE SELECT menu.
6. Select your desired mode.
FEATURES
MODE SELECT
Ñ
FM RADIO
•
HD
•
PC
7. Enter selected mode.
Note : You can also access directly the FM RADIO. HD and PC modes by the
RADIO
HD
and
PC
buttons.
17/23PF9945/69 p27-38 29
29
8/15/03, 1:45 PM
A
CCESSING THE
LCD TV F
EATURES
M
ENU
A
CTIVATING THE
C
HILD
L
OCK
(A
CCESS
C
ODE
)
The Child Lock feature allows you to lock channels on your TV Top Controls to prevent your children from watching programmes you deem undesirable.
Note : You cannot have access to the locked channels via the top controls of the TV set once the channels are locked. You can only have access to the locked channels via the remote control. Keep the remote control out of reach so as to prevent your children from having access to it.
k k k
MENU MENU MENU
FEATURES
â–²
•
â–¼
É
TIMER TIME
•
MODE SELECT START TIME
•
CHILD LOCK STOP TIME
•
WIDE SCREEN CHANNEL
ACTIVATE
1. Enter main menu. 2. Select FEATURES. 3. Enter FEATURES menu.
Press Button
4. Select CHILD LOCK.
Result on TV Screen
FEATURES
•
TIMER ACCESS CODE
•
MODE SELECT --:--
•
â–²
É
â–¼
CHILD LOCK
•
WIDE SCREEN
FEATURES
•
TIMER ACCESS CODE
•
MODE SELECT X X X X
Ñ
CHILD LOCK
•
WIDE SCREEN
INCORRECT
1
4
7
2
5
8
0
6
3
9
1
4
7
2
5
8
0
3
6
9
5. Enter ACCESS CODE mode.
6. Key in access code 0711
(0711 is the default access code).
A message INCORRECT will appear.
7. Key in 0711 the second time.
When the message CORRECT appears, the CHILD LOCK menu is now accessible.
FEATURES
•
TIMER ACCESS CODE
•
MODE SELECT X X X X
Ñ
CHILD LOCK
•
WIDE SCREEN
CORRECT
FEATURES
CHILD LOCK
Ñ
LOCK CHANNEL
•
CHANGE CODE
•
CLEAR ALL
â–²
•
É
2
3
4
5
6
17/23PF9945/69 p27-38
You can now proceed to change the access code of your choice.
30
30 3/13/03, 4:47 PM
A
CCESSING THE
LCD TV F
EATURES
M
ENU
A
CTIVATING THE
C
HILD
L
OCK
(C
HANGE
C
ODE
)
Press Button
Result on TV Screen
8. Select CHANGE CODE.
FEATURES
CHILD LOCK
•
LOCK CHANNEL ENTER
Ñ
CHANGE CODE NEW CODE
•
CLEAR ALL – – – –
1
4
7
2
5
8
0
3
6
9
9. Enter CHANGE CODE mode.
10. Key in the access code of your choice.
1
4
7
2
5
8
0
3
6
9
11. Confirm access code.
FEATURES
CHILD LOCK
•
LOCK CHANNEL ENTER
Ñ
CHANGE CODE
•
CLEAR ALL
NEW CODE x x x x
FEATURES
CHILD LOCK
•
LOCK CHANNEL CONFIRM
Ñ
CHANGE CODE
•
CLEAR ALL
CODE x x x x
When the new code is confirmed, the message CORRECT will appear.
FEATURES
CHILD LOCK
•
LOCK CHANNEL CONFIRM
Ñ
CHANGE CODE
•
CLEAR ALL
CODE x x x x
CORRECT i
12. Exit menu from screen.
Note : After you have exit menu from screen and you want to enter child lock menu again , you need to key the new access code only once. If you have forgotten the new access code, key in 0711 twice to enter the child lock menu. Upon entering the child lock menu, you can proceed to change code again.
31
17/23PF9945/69 p27-38 31 3/13/03, 4:47 PM
A
CCESSING THE
LCD TV F
EATURES
M
ENU
A
CTIVATING THE
C
HILD
L
OCK
(L
OCK
C
HANNEL
)
MENU k
MENU k
MENU k
FEATURES
â–²
•
â–¼
É
TIMER
•
MODE SELECT START TIME
•
CHILD LOCK
TIME
STOP TIME
•
WIDE SCREEN CHANNEL
ACTIVATE
1. Enter main menu. 2. Select FEATURES. 3. Enter FEATURES menu.
Press Button
Result on TV Screen
4. Select CHILD LOCK .
5. Enter ACCESS CODE mode.
6. Key in access code .
FEATURES
•
TIMER ACCESS CODE
•
MODE SELECT --:--
â–²
•
â–¼
É
CHILD LOCK
•
WIDE SCREEN
FEATURES
•
TIMER ACCESS CODE
•
MODE SELECT X X X X
•
CHILD LOCK CORRECT
Ñ
WIDE SCREEN
or i
7. Enter LOCK CHANNEL mode.
8. Select the channel you want to block.
9. Activate blocking of channel. A keylock symbol will appear beside the channel number indicating that it is locked.
10. Exit menu from screen.
FEATURES
CHILD LOCK
Ñ
LOCK CHANNEL
•
CHANGE CODE
•
CLEAR ALL
•
É
2
3
4
5
6
FEATURES
CHILD LOCK
Ñ
LOCK CHANNEL
•
É
3 F
•
CHANGE CODE 4
•
CLEAR ALL 5
6
7
Note : You cannot have access to the locked channels via the top controls of the TV set.
You can only have access to the locked channels via the remote control.
When AV1 source is locked, CV1 source is automatically locked. Like-wise, if CV1 source is locked, AV1 source is also automatically locked as they share the same audio input.
If you attempt to enter the INSTALL menu after locking a channel, a message
“Enter ACCESS CODE” will appear on the screen. You need to enter the ACCESS
CODE to enable you to enter the INSTALL menu.
32
17/23PF9945/69 p27-38 32 3/13/03, 4:48 PM
A
CCESSING THE
LCD TV F
EATURES
M
ENU
A
CTIVATING THE
C
HILD
L
OCK
(C
LEAR
A
LL
)
To unlock channels that you have locked, enter the Child Lock menu and activate the
CLEAR ALL mode.
MENU k
MENU k
MENU k
FEATURES
•
â–¼
É
TIMER
•
MODE SELECT START TIME
•
CHILD LOCK
TIME
STOP TIME
•
WIDE SCREEN CHANNEL
ACTIVATE
1. Enter main menu. 2. Select FEATURES. 3. Enter FEATURES menu.
Press Button
Result on TV Screen
4. Select CHILD LOCK.
5. Enter ACCESS CODE mode.
6. Key in access code.
FEATURES
•
TIMER ACCESS CODE
•
MODE SELECT --:--
â–²
•
â–¼
É
CHILD LOCK
•
WIDE SCREEN
FEATURES
•
TIMER ACCESS CODE
•
MODE SELECT X X X X
•
CHILD LOCK CORRECT
Ñ
WIDE SCREEN
7. Press button repeatedly until
CLEAR ALL is selected.
FEATURES
CHILD LOCK
•
LOCK CHANNEL
•
CHANGE CODE
Ñ
CLEAR ALL
â–²
•
É
8. Activate clearing of all locked channels.
FEATURES
CHILD LOCK
•
LOCK CHANNEL
•
CHANGE CODE
Ñ
CLEAR ALL
â–²
•
É
CLEARED i
9. Exit menu from screen.
Note
You can also unlock individual channel by the LOCK CHANNEL menu
• Repeat step 1 to 7 as in “ACTIVATING THE CHILD LOCK (LOCK CHANNEL)”.
• Select the channel you want to unlock by the or (CURSOR UP / DOWN) buttons.
• Press the (CURSOR RIGHT) button to unlock channel (the keylock symbol will disappear).
33
17/23PF9945/69 p27-38 33 3/13/03, 4:48 PM
U
SING THE
S
CREEN
F
ORMAT
Screen Format function allows you a choice of different formats for your viewing pleasure, namely : - 4:3, Zoom 14:9, Zoom 16:9, Subtitle Zoom, Superwide, Widescreen and
Full Screen
.
Enter the FEATURES menu and select WIDE SCREEN to cycle through the various screen formats and select the format of your choice. You can also use q
(SCREEN
FORMAT
) or buttons to cycle through the various screen formats.
Definition of Screen Formats
4:3 Mode
This picture is reproduced in 4:3 format and a black band is displayed on either side of the picture.
Zoom 14:9 Mode
This picture is enlarged to 14:9 format, a thin black band remains on both sides of the picture.
Zoom 16:9 Mode
This picture is enlarged to 16:9 format. This mode is recommended when displaying pictures which have black bands at the top and bottom
(letterbox format).
Subtitle Zoom Mode
This mode is use to display 4:3 pictures using the full surface of the screen leaving the subtitles visible.
Superwide Mode
This mode is use to display 4:3 pictures using the full surface of the screen by enlarging the sides of the picture.
Widescreen Mode
This mode restores the correct proportions of pictures transmitted in 16:9 using full screen display.
Note : If you display a 4:3 picture in this mode, it will be enlarged horizontally.
Full Screen
Select this mode when displaying pictures have black bands at the top and bottom or at the left and right to enable you to enjoy full display of the picture on the screen.
34
17/23PF9945/69 p27-38 34 3/13/03, 4:48 PM
A
CTIVATING THE
S
LEEPTIMER
Sleeptimer function allows you to select a time period in which the set will switch to standby mode automatically upon reaching the selected time period. You have a choice of time period starting from OFF up to a maximum of 240 minutes
1. Press the (SLEEPTIMER) button to display the time period.
SLEEP OFF
2. Press the (SLEEPTIMER) button repeatedly to cycle through the various time periods and select the time period of your choice.
Note
• During the last minute of a Sleep time setting, an on-screen countdown will be displayed. Pressing any button on the remote control during the countdown will cancel the Sleep-timer.
• During the last 10 seconds of a Sleep timer setting, an on-screen display will read Goodbye.
SLEEP 240
A
CTIVATING THE
A
CTIVE
C
ONTROL
This feature automatically adjust settings for optimal picture quality continuously under any signal conditions. You have a choice of 4 modes : ACTIVE CONTROL OFF, ACTIVE
CONTROL MIN, ACTIVE CONTROL MED and ACTIVE CONTROL MAX
H
OW TO
A
CCESS AND
S
ELECT THE
A
CTIVE
C
ONTROL MODE
1. Press the
ACTIVE
CONTROL
(ACTIVE CONTROL) button repeatedly to cycle through the various four
ACTIVE CONTROL modes and select your desired mode.
ACTIVE CTRL OFF
ACTIVE CTRL MIN
2. Press i
(OSD) button to exit menu from screen or wait for the On-Screen Display to time out.
35
17/23PF9945/69 p27-38 35
ACTIVE CTRL MAX
8/15/03, 1:47 PM
A
CTIVATING THE
LCD TV S
MART
P
ICTURE
/ S
OUND
C
ONTROL
SMART PICTURE feature offers you a choice of 5 picture settings, namely, RICH,
NATURAL, SOFT, PERSONAL and MULTIMEDIA.
SMART SOUND feature offers you a choice of 4 sound settings, namely, THEATRE,
MUSIC, VOICE and PERSONAL.
Press
SMART
(SMART PICTURE) or
SMART
(SMART SOUND) button repeatedly to cycle through the settings to select your desired mode.
Definition of Picture Settings
PERSONAL
RICH
NATURAL
SOFT
: Picture settings are set to your preference.
: Emphasize very vibrant colours.
(Suitable for AV mode in brightly-lit room)
: Emphasize original colours.
: Emphasize “warm” colours.
(Suitable for dimly-lit room condition and gives cinema-like effect when light is switched off).
MULTIMEDIA : Emphasize “soft” colours. (Suitable for playing computer games, surfing, etc.)
Note : The PERSONAL setting is the setting that you set up using the Picture menu in the main menu.
This is the only setting in the Smart Picture settings that can be changed. All the other settings are pre-set at the factory.
PERSONAL
BRIGHTNESS
COLOR
PICTURE
RICH
COLOR
PICTURE
SHARPNESS
BRIGHTNESS
COLOR
NATURAL
PICTURE
SOFT
48
41
81
COLOR
PICTURE
SHARPNESS
BRIGHTNESS
MULTIMEDIA
COLOR
PICTURE
SHARPNESS
27
79
3
45
30
71
3
30
50
3
43
30
75
Definition of Sound Settings
PERSONAL : Sound settings are set to your preference.
VOICE
MUSIC
THEATRE
: Emphasize high tone. (Treble boosted)
: Emphasize low tone. (Bass boosted)
: Emphasize sensation to action.
(Bass and Treble boosted)
120HZ
500HZ
1500HZ
1500HZ
1500HZ
Note : The values shown in the Picture/Sound
Setting diagrams are sample values only. Your television’s values may vary and display different numbers.
1500HZ
5KHZ
10KHZ
PERSONAL
VOICE
MUSIC
THEATRE
20
6
6
6
6
6
17
19
36
17/23PF9945/69 p27-38 36 8/15/03, 1:47 PM
U
SING THE
T
ELETEXT
If a TV channel broadcast contains teletext information, each channel that broadcasts teletext transmits a page (index page) with information on how to use the teletext system, usually on page 100. The system transmitted is indicated in the option line at the bottom of the screen.
VCR
DVD
MODE
æ v o
2
A/CH
SMART
X
ACTIVE g b
SMART
CONTROL
MENU k
V
OK
PC
1
4
7 i
TV
MUTE
¬
8
0
2
5
HD
CH
RADIO
3
6
9 q
(
‘
&
& On/Off teletext
and
Superimpose teletext page over TV programme
b
“
é Selecting a
teletext page
é
1
4
7
2
5
8
0
3
6
9
“ Accessing
a teletext page
CH
Press the button once to switch on teletext display. (A channel in which teletext is being transmitted must be selected).
Press the button the second time superimpose the teletext page over the TV programme.
Press the button the third time to exit teletext mode.
Key in the required teletext page
(3 digits). The page number is displayed at the top left hand corner of the screen. When the teletext page is located, the counter stops searching. If the counter keeps searching, it means that the page is not available for selection. If you make a mistake in keying the page number, you have to complete keying the 3-digit number before re-keying the correct page number.
Press the CHANNEL + button to display the next page and the
CHANNEL – button to display the previous page.
‘ Direct Access to
The 4-colour buttons allow you to
an item or corresponding pages
access directly an item or corresponding pages.
æ o
( Main Index i
Press the button to return to the main index page.
37
17/23PF9945/69 p27-38 37 3/13/03, 4:48 PM
U
SING THE
T
ELETEXT
§
!
VCR
DVD
MODE
æ v o
2
A/CH
SMART
X
ACTIVE g b
SMART
CONTROL
MENU k
V
OK
PC
1
4
7 i
TV
MUTE
¬
8
0
2
5
HD
CH
RADIO
3
6
9 q
§ Dual Page
Text
X
Press button to enable you to display dual page text.
ç
è
!
è Hold g
When a dual page is displayed, use this button to toggle between the dual page. Once an active page is selected, the other page will be on hold mode. If the page has sub-pages, use the Cursor Right or Left button to access the next or previous page
! Selecting a
For a teletext page with sub-pages,
sub-page
press the Cursor Left or Right button to access the previous subpage or the next subpage.
ç Reveal/
Conceal
v
Press the button once to reveal hidden information (solutions to puzzles, riddles, etc). Press the button the second time to conceal information.
This button is applicable only to teletext page with puzzles, riddles, etc.)
How to select your favourite page
This feature allows you select 4 of your favourite or most commonly viewed page and stored them in the favourite page selection. You can then access directly your favourite page by the colour buttons without having to key in the page number.
1. Press the b
(TELEXTEXT ON/OFF) button to enter teletext mode.
2. Press the
MENU
(MENU) button to enter favourite page selection. Note : The colour alphabets at the bottom of the screen is now changed to page numbers.
3. Key in your favourite page by the
1
4
7
2
5
8
0
3
9
6
(DIGIT 0 -9) buttons.
4. Press the i
(OSD) button followed by your desired colour button to store your favourite page.
5. Repeat step 3 to 4 to select and store other favourite pages.
6. To exit Favourite page mode, press
MENU
(MENU) button.
7. Press the b
(TELEXTEXT ON/OFF) button twice to exit teletext mode.
38
17/23PF9945/69 p27-38 38 8/15/03, 1:49 PM
A
CCESSING THE
FM R
ADIO
I
NSTALLATION
M
ENU
This TV also provides you with the FM RADIO for your listening pleasure. To enable you to access the FM RADIO mode, you must connect the cable from FM Antenna socket to the
FM Radio mains.
Press Button
Result on TV Screen
RADIO
1. Enter into FM Radio mode.
MENU
Ñ
•
â–¼
É
SOUND EQUALIZER
•
FEATURES BALANCE
•
INSTALL AVL
INCR.SURROUND
2. Enter FM RADIO main menu.
3. Press button button repeatedly until INSTALL is highlighted.
or
4. Enter INSTALL menu.
5. Press button button repeatedly to scroll through the available FM Mode
On-screen options. These options include LANGUAGE, AUTO STORE,
MANUAL STORE, SORT and NAME.
LANGUAGE – Choose to view the
On-screen menu in your desired language.
AUTO STORE – Allows you to search the FM antenna signal and store any FM channel it finds in the TV’s memory.
MANUAL STORE – Allows you to manually tune any available FM signals.
SORT– Allows you to rearrange your stored FM stations in the order you prefer.
NAME – Allows you to apply a name to your programmed FM radio stations.
Add your own personal name or choose one from the predefined list.
6. Adjust or select items within the highlighted feature sub-menu.
•
•
•
â–²
É
SOUND
FEATURES
INSTALL
LANGUAGE
AUTO STORE
MANUAL STORE
SORT
NAME
INSTALL
Ñ
LANGUAGE
•
AUTO STORE
•
MANUAL STORE
•
SORT
•
NAME
•
â–²
•
É
ENGLISH
B.MELAYU
â–¼
INSTALL
•
LANGUAGE
Ñ
AUTO STORE
•
MANUAL STORE
•
SORT
•
NAME
•
â–²
•
É
SEARCH
â–¼
INSTALL
•
LANGUAGE
•
AUTO STORE
â–²
•
â–¼
É
MANUAL STORE
•
SORT
•
NAME
SEARCH
CHANNEL
STORE
INSTALL
•
LANGUAGE
•
AUTO STORE
•
MANUAL STORE
•
É
â–¼
SORT
•
NAME
FROM
TO
EXCHANGE
INSTALL
•
LANGUAGE
•
AUTO STORE
•
MANUAL STORE
•
SORT
Ñ
NAME
â–²
•
É
PERSONAL i
7. Exit menu from screen.
39
17/23PF9945/69 p39-51 39 3/13/03, 4:44 PM
U
SING THE
FM R
ADIO
S
OUND
M
ENU
The Sound menu allows you to make adjustments to the sound.
Note: Ensure you are in FM RADIO mode before you access FM RADIO main menu.
k k
MENU
MENU
SOUND
â–²
•
É
EQUALIZER
•
BALANCE
•
AVL
•
INCR.SURROUND
•
120HZ
500HZ
1500HZ
5KHZ
10KHZ
1. Press
MENU
button to enter FM RADIO main menu. SOUND option is highlighted.
2. Press button to enter the
SOUND menu.
3. In the SOUND menu, press or button to adjust level or select desired setting.
4. Use the buttons to select the various SOUND menu items and make your desired adjustments and access the sub-menus.
5. Press i
button to exit menu from screen.
Sound menu items
EQUALIZER
BALANCE
AVL
(Auto Volume
Leveller)
INCREDIBLE
SURROUND
Activities
Allows you a choice of different sound frequencies.
Increase or decrease to adjust balance level.
As variation in signal conditions can result a sudden change in volume during FM channel switching, selecting the “ON” function will enable the volume to remain at a standard volume level.
Allows you to select between Incredible Surround
Dolby Virtual or Stereo sound when transmission is in stereo. Allows you to select between Spatial and Mono sound when transmission is in mono.
U
SING THE
FM R
ADIO
S
MART
S
OUND
C
ONTROL
FM RADIO SMART SOUND feature offers you a choice of 5 sound settings, namely,
ROCK, POP, CLASSICAL, JAZZ, and PERSONAL.
1) Press the
RADIO
(FM RADIO) button to enter FM RADIO mode.
2) Press
SMART
(SMART SOUND) button repeatedly to cycle through the various settings and select your desired sound mode.
3) Press the i
(OSD) button to exit On-Screen display .
40
17/23PF9945/69 p39-51 40 8/25/03, 5:30 PM
A
CCESSING THE
FM R
ADIO
F
EATURES
M
ENU
A
CTIVATING THE
T
IMER
The Timer feature allows you to set the timer to switch to another FM channel at a specified time while you are listening another FM channel. For the timer to function, the set must not be switched off. Once the set is switched off, the timer is disabled. Note : Ensure you are in FM
RADIO mode before you access FM RADIO main menu.
k
MENU
â–²
MENU k
MENU k
FEATURES
•
É
TIMER
•
MODE SELECT
•
SCREENSAVER
TIME
START TIME
STOP TIME
CHANNEL
ACTIVATE
1. Enter FM RADIO main menu.
2. Select FEATURES.
3. Enter FEATURES menu.
Use the Menu and Cursor Up, Down, Right and Left buttons to access the Timer menu to : – select the items. make the following adjustments or activate the timer.
TIME
ACTIVATE
DISPLAY
: Use the
1
4
7
2
5
8
0
9
3
6
buttons to key in the current time to enable functioning of the timer feature.
START TIME : Use the
4
7
1 2
5
8
0
3
9
6
buttons to key in the time you want the channel to be switched on.
STOP TIME : Use the
4
1
7
2
5
8
0
3
9
6
buttons to key in the time you want the program to be switched off.
CHANNEL
: Use the
4
1
7
2
5
8
0
3
9
6
buttons to key in the
FM channel number.
: Use the Cursor buttons to select between the Once and Daily mode to activate the timer.
: Use the Cursor buttons to select the ON option to display current time on screen.
FEATURES
TIMER
Ñ
TIME
•
START TIME
•
STOP TIME
•
CHANNEL.
•
ACTIVATE
•
É
â–²
12:30
â–¼
TIME
É
â–²
Ñ
•
START TIME
•
13:30
•
STOP TIME
â–¼
•
CHANNEL
FEATURES
•
ACTIVATE
•
TIME
•
START TIME
Ñ
STOP TIME
•
CHANNEL
•
ACTIVATE
TIMER
•
É
â–²
15:30
â–¼
•
TIME
•
START TIME E
•
STOP TIME
Ñ
CHANNEL
•
ACTIVATE
FEATURES
TIMER
â–²
•
TIME
•
START TIME E
•
STOP TIME
•
CHANNEL
Ñ
ACTIVATE
•
â–²
•
É
â–¼
â–¼
É
FM8
ONCE
FEATURES
TIMER
•
START TIME E
•
STOP TIME E
•
CHANNEL
•
ACTIVATE
Ñ
DISPLAY
â–²
•
É
ON
41
17/23PF9945/69 p39-51 41 8/25/03, 5:30 PM
A
CCESSING THE
FM R
ADIO
F
EATURES
M
ENU
U
SING THE
M
ODE
S
ELECT
This feature allows you to go into TV, HD or PC mode. Note : Ensure you are in FM
RADIO mode before you access FM RADIO main menu.
MENU k
MENU k
MENU k
FEATURES
â–²
•
â–¼
É
TIMER TIME
•
MODE SELECT START TIME
•
SCREENSAVER STOP TIME
CHANNEL
ACTIVATE
1. Enter FM RADIO main menu.
2. Select FEATURES.
3. Enter FEATURES menu.
Result on Screen Press Button
4. Select MODE SELECT.
or
5. Enter MODE SELECT menu.
6. Select your desired mode.
7. Enter selected mode.
FEATURES
•
TIMER TV
Ñ
MODE SELECT HD
•
SCREENSAVER PC
FEATURES
MODE SELECT
Ñ
TV
•
HD
•
PC
â–²
Note : You can also access directly the TV, HD and PC modes by the
TV HD PC
buttons.
A
CTIVATING THE
S
CREENSAVER
Repeat Steps 1 to 3 as in “Using the Mode Select”.
4. Select SCREENSAVER.
or i
17/23PF9945/69 p39-51
5. Select ON option to activate screensaver mode.
6.Exit menu from screen.
42
42
FEATURES
•
TIMER
•
MODE SELECT
Ñ
SCREENSAVER
FEATURES
•
TIMER
•
MODE SELECT
•
SCREENSAVER
ON
â–²
•
É
ON
â–¼
8/25/03, 5:30 PM
A
CCESSING THE
PC M
ODE
This TV also allows you use your TV as a PC monitor. To enable you to access PC mode in the
TV, you must connect the following :–
& Connect DC input terminal to the AC adaptor.
é Connect the Mains Plug from the AC adaptor to the AC outlet.
“ Connect Audio L and R output of your PC to the Audio IN L and R of your TV.
‘ Press
PC
button to enter into PC mode.
( Press
MENU
button to enter into the PC Main Controls Menu.
Using theThe 4 buttons , , and (Cursor Down, Up, Left and Right) on the remote control allow you to select the desired menu item, make adjustments and access the sub-menus.
The PC Main Controls menu allows you to access for the followiong menu items :
– AUDIO SELECTION
Allows audio selection between the PC , TV/Source and FM
Radio.
– BRIGHTNESS and
CONTRAST
Allows you to increase or decrease Brightness and Contrast level.
– ADJUST COLOR
Adjusts the color temperature of the picture. 3 settings are available (Normal, Warm, Cool or Personal).
– VIDEO NOISE
Allows you to eliminate the vertical bars by using the Clock adjustment of Video Noise. Also allows you to eliminate the horizontal bars by using the Phase Adjustment of VIDEO
NOISE in the Main Controls.
– ADJUST POSITION
– AUTO ADJUST
Allows you to adjust the horizontal and vertical image position.
Allows you to do automatic adjustments of settings.
– PIP CONTROLS
Press
æ
(PIP ON/OFF) button to allow you go into PIP mode.
PIP Controls allows to change the Size and Position of the subscreen.
– MODE SELECT
– VIEW FORMATS
Allows you enter into TV, HD or FM Radio mode.
– RESET TO FACTORY
Allows you to reset all settings to Default Factory settings
SETTINGS
Allows you to choose between Native and Wide Screen formats.
43
17/23PF9945/69 p39-51 43 8/25/03, 5:30 PM
PC D
ISPLAY
S
ETUP
When you are using the TV as a Computer Display, follow the procedures for PC Display setup.
Note : Different Window versions may give different PC Display setup procedures.
1. Press
PC
(PC) button on the remote control to enter PC mode.
Note : The LCD TV will go on standby mode automatically within 5 seconds if no PC signal is detected.
2. Click on “Settings” on the Window Start menu.
3. Select “Control Panel”.
4. Click on “Display” and a display dialog-box will appear.
5. Navigate to the “Settings” tab on the display dialog-box.
6. Select the required “Colours and Resolution” and click “OK”.
7. Dialog-box “..Does Not Support..’ message will be displayed if set does not support settings.
U
SING THE
PC P
ICTURE
-
IN
-P
ICTURE
F
EATURE
Picture-in-Picture feature allows you to call up a subscreen within your main screen.
How to switch on the Picture-in-Picture Window screen
1. Press
PC
(PC) button on the remote control to enter PC mode.
2. Press the
æ
( PIP On/Off) button to switch on Picture-in-Picture screen (A large size
PIP screen appears).
3. Press the
æ
( PIP On/Off) button a second time to change PIP screen to a medium size.
4. Press the
æ
( PIP On/Off) button a third time to change to a small size.
5. Press the
æ
( PIP On/Off) buuton a fourth time to exit PIP screen.
Note : PC mode supports Picture-in-Picture with PC refresh rate not more than 60Hz.
How to position the Picture-in-Picture screen
2. In PC mode, press the
æ
(
Picture-in-Picture On/Off) button to switch on Picture-in-
Picture screen.
3. Press the o
(PIP Position) button repeatedly to position PIP screen to the position of your choice. (You can choose to position your PIP screen to be on the top left/top right/ bottom right or bottom left hand corner).
4. Press the
æ
( PIP On/Off) button three times to exit PIP screen.
44
17/23PF9945/69 p39-51 44 3/13/03, 4:44 PM
18
19
20
15
16
17
10
11
12
13
14
5
6
7
8
9
3
4
1
2
PC M
ODES
S
UPPORT
Note : If the signal from the system does not equal the PC Modes Support, there may be no video or corrupted video. Proceed to change the system to the right resolution that the PC mode support.
No.
Resolution
640 x 480
720 x 400
800 x 600
832 x 624
1024 x 768
1152 x 864
1280 x 960
1280 x 1024
75 Hz
85 Hz
75 Hz
60 Hz
60 Hz
75 Hz
75 Hz
85 Hz
75 Hz
60 Hz
70 Hz
85 Hz
70 Hz
56 Hz
60 Hz
72 Hz
Refresh Vertical
Rate Sync
60 Hz
67 Hz
N
N
72 Hz
75 Hz
N
N
N
P
P
P
P
P
P
P
P
P
P
P
P
P
N
N
46,900 kHz
53,700 kHz
49,700 kHz
48,400 kHz
56,500 kHz
60,000 kHz
68,700 kHz
67,500 kHz
60,000 kHz
64,000 kHz
80,000 kHz
Horizontal Horizontal
Sync Polarity
31,500 kHz
35,000 kHz
N
N
37,900 kHz
37,500 kHz
N
N
43,300 kHz
31,469 kHz
35,100 kHz
37,900 kHz
48,100 kHz
N
N
P
P
P
P
P
P
P
P
P
P
P
P
N
N
49,500 MHz
56,250 MHz
57,300 MHz
65,000 MHz
75,000 MHz
78,750 MHz
94,500 MHz
108,000 MHz
108,000 MHz
108,000 MHz
135,000 MHz
Pixel
Frequency
25,175 MHz
30,240 MHz
31,500 MHz
31,500 MHz
36,000 MHz
28,322 MHz
36,000 MHz
40,000 MHz
50,000 MHz
45
17/23PF9945/69 p39-51 45 3/13/03, 4:44 PM
A
CCESSING THE
HD (H
IGH
D
EFINITION
) M
ODE
The HD mode offers you Picture and Sound adjustments, Mode Select and Lock Channel feature.
U
SING THE
HD P
ICTURE
/ S
OUND
M
ENU
The HD Picture and Sound menus allow you to make adjustments to the picture and sound. It alsoallow you to select and activate other features in the menu.
1. Press the
HD
(HD) button to enter HD mode.
2. Press the
MENU
(MENU) button to enter main menu.
3. Use the (CURSOR UP/DOWN) buttons to select the items on the
HD PICTURE/SOUND menu.
4. Use the (CURSOR LEFT/RIGHT) buttons to access the sub-menus.
Picture menu items
Brightness
Color
Contrast
Sharpness
Hue
Color Temp
Format
Activities
Increase or decrease brightness level.
Increase or decrease color level.
Increase or decrease contrast level until lightest parts of the picture show good detail.
Increase or decrease sharpness level to improve detail in the picture.
Imcrease or decrease hue level
Allows you a choice of 3 picture settings
(NORMAL, WARM and COOL).
Allows you to choose between FULL
SCREEN and WIDE SCREEN formats.
PICTURE
BRIGHTNESS
COLOR
CONTRAST
SHARPNESS
HUE
COLOR TEMP
FORMAT
Ñ É
38
PICTURE
COLOUR
CONTRAST
SHARPNESS
HUE
COLOR TEMP
FORMAT
Ñ
FULL SCREEN
É
Note : HUE feature is only applicable to NTSC programmes. The HUE item will not appear on the menu if programme is in PAL mode.
Sound menu items
Activities
Equalizer Allows you a choice of different sound frequencies.
BALANCE Increase or decrease to adjust balance level.
AVL As variation in signal conditions can result
(Auto Volume a sudden change in volume during in
Leveller) commercial breaks or channel switching, selecting the “ON” function will enable the volume to remain at a standard volume level.
SOUND
EQUALIZER
120HZ
Ñ
500HZ
1500HZ
5KHZ
10KHZ
BALANCE
AVL
É
SOUND
EQUALIZER
120HZ
500HZ
1500HZ
5KHZ
10KHZ
BALANCE
AVL
Ñ
ON
É
-12
46
17/23PF9945/69 p39-51 46 3/13/03, 4:44 PM
A
CCESSING THE
HD (H
IGH
D
EFINITION
) M
ODE
U
SING THE
HD M
ODE
S
ELECT
The HD MODE SELECT feature allows you to switch to TV MODE, FM RADIO MODE, or PC MODE.
1. In HD mode, press the
MENU
(MENU) button to enter
HD main menu.
2. Press the (CURSOR DOWN) button repeatedly until MODE SELECT is highlighted.
MAIN
PICTURE
SOUND
MODE SELECT
LOCK CHANNEL
3. Use the (CURSOR /RIGHT) button to
MODE SELECT menu
4. Use the (CURSOR UP/DOWN) buttons to select TV MODE, FM RADIO MODE or
PC MODE.
MODE SELECT
TV MODE
RADIO MODE
PC MODE HD1
5. Press (CURSOR RIGHT) button to activate selected HD mode.
U
SING THE
HD L
OCK
C
HANNEL
The HD LOCK CHANNEL feature allows you to lock the HD mode channel to censor the viewing of programme not suitable for children.
1. In HD mode, press the
MENU
(MENU) button to enter main menu.
2. Use the (CURSOR DOWN) button repeatedly until LOCK CHANNEL is highlighted..
3. Use the
4
1
7
2
5
8
0
3
6
9
(DIGIT) buttons to enter the four digit
Access Code to set uo the LOCK CHANNEL function.
4. Use the (CURSOR /RIGHT) button to select
ON or OFF options. If ON option is selected, the
HD channel will not allow viewing of programmes.
5. Press i
(OSD) button to exit menu from screen.
MAIN
PICTURE
SOUND
MODE SELECT
LOCK CHANNEL ACCESS CODE
----
MAIN
PICTURE
SOUND
MODE SELECT
LOCK CHANNEL Ñ ON É
47
17/23PF9945/69 p39-51 47 3/13/03, 4:44 PM
B
EFORE
C
ALLING
S
ERVICE
(TV M
ODE
)
Below is a list of frequently occurred symptoms. Before you call for service, make these simple checks. Some of these symptoms can easily be rectified if you know what to do.
Symptom
No power
No picture
What you should do
• Check whether adaptor is connected properly into cinch.
• Check the TV’s AC power cord is plugged into the mains socket. If there is still no power, disconnect plug. Wait for
60 seconds and re-insert plug. Switch on the TV again.
• Check whether transmission is in TV mode. Press
TV
(TV button) on remote control to confirm.
• Check the antenna connection at the rear of the TV.
• Possible TV station problem. Try another channel.
Good picture but no sound
• Try increasing the volume.
• Check that the sound is not muted. If it is muted, press the
Mute button on the remote control to restore sound.
• Chek that your headphone is not connected.
• Try increasing the contrast and brightness setting.
Good sound but poor colour or no picture
Snowish picture and noise
Horizontal dotted lines
Double images or
“Ghost” images
TV not responding to remote control handset
An after-image appears
An after-image remains after the power has been turned off
• Check antenna connection at the rear of the TV.
• Possible electrical interference e.g. hairdryer, vacuum cleaner, etc. Switch off appliances.
• Possible poor positioning of antenna. Using a highly directional antenna may improve reception.
• Check life span of batteries of remote control handset.
• Aim remote control handset directly at remote control sensor lens on the TV.
• If an image remains in the screen for an extended period of time, it may be imprinted in the screen and leave an afterimage. This usually disappears after a few hours.
• This is characteristic of liquid crystal and is not caused by a malfunction or deterioration of the liquid crystal. This afterimage will disappear after a set amount of time.
48
17/23PF9945/69 p39-51 48 3/13/03, 4:44 PM
B
EFORE
C
ALLING
S
ERVICE
(PC / FM R
ADIO
M
ODE
)
Below is a list of frequently occurred symptoms when you are in PC /FM RADIO mode .
Before you call for service, make these simple checks. Some of these symptoms can easily be rectified if you know what to do.
Symptom
Incorrect Display position
No Video Input
Vertical flicker appears
Horizontal flicker appears
Screen too bright or dark
Cannot access FM radio
What you should do
• Adjust the image position using the Horizontal Position and/ or Vertical Position in the PC Mains Controls menu.
• Make sure the monitor cable is properly connected to the
PC input (VGA) at the rear of the TV.
• Check whether the monitor cable has bent pins.
• Try eliminating the vertical bars by using the Clock
Adjustment of VIDEO NOISE in the Main Controls.
• Try eliminating the horizontal bars by using the Phase
Adjustment of VIDEO NOISE in the Main Controls.
• Try adjusting the contrast and brightness in the Main
Controls.
• Check whether the connection from FM Antenna socket to the FM Radio mains is done correctly.
17/23PF9945/69 p39-51 49
49
3/13/03, 4:44 PM
S
PECIFICATIONS
Picture tube screen size
17PF9945
432 mm
23PF9945
584 mm
Audio Output 2 x 3 W 2 x 5 W
TV System NTSC M
PAL B/G
PAL D/K
PAL I
SECAM B/G
SECAM D/K
SECAM K1
Playback System
NTSC 3.58, NTSC 4.43, PAL 60
Set Dimensions without stand
Length
Height
Depth
517 mm
301 mm
65 mm
704 mm
373 mm
76 mm
Set Dimensions with stand
Length
Height
Depth
517 mm
340 mm
177 mm
704 mm
419 mm
195 mm
Net Weight of Set with stand 6.4 kg
9.9 kg
Note
For Operating Voltage, Frequency, Power Consumption and Version Number, refer to the type number on mains adaptor.
17/23PF9945/69 p50 50
50
4/2/03, 11:14 AM
17/23PF9945/69 p39-51 51
51
3139 125 30942
8/25/03, 5:31 PM
advertisement