Rocketfish RF-HTS4218 Power Center Quick Setup Guide

Rocketfish RF-HTS4218 Power Center Quick Setup Guide

Below you will find brief information for Power Center RF-HTS4218. This product removes unwanted interference from incoming power to provide only clean, pure power to your sensitive electronic devices. It has switchable LED trace lighting on all USB ports and outlets for easy connection in dark spaces. It also includes 2 on-board USB ports with 4.8A of current for high-speed charging of devices. The Power Center RF-HTS4218 is sleek, modern design with brushed aluminum accents and a premium fabric-wrapped power cord to fit with modern electronics.

advertisement

Assistant Bot

Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.

Rocketfish Power Center RF-HTS4218 Quick Setup Guide | Manualzz

PACKAGE CONTENTS

• USB Power Hub

• Extension Cables (2)

Quick Setup Guide

FEATURES

• Advanced two-stage power filtration removes unwanted interference from incoming power to provide only clean, pure power to your sensitive electronic devices

• Switchable LED trace lighting on all USB ports and outlets for easy connection in dark spaces

• 2 on-board USB ports with 4.8A of current for high-speed charging of devices

• Sleek, modern design with brushed aluminum accents and a premium fabric-wrapped power cord to fit with modern electronics

• Advanced fireproof MOVs assure the best protection and safety during a surge event

• Status indicator lights for Power Protection and Power Filtration so you know your Power Center is working properly

• Wide-spaced outlet for larger plugs and power supplies

• Heavy-duty, low-profile plug for easy placement in tight places

• Wear-resistant, fabric-wrapped power cord

• Coax jacks for protecting cable/satellite/internet devices from power surges

QUICK SETUP GUIDE

RF-HTS4218, 7-Outlet Power Center

USB ports

AC outlets

Power Filtering

LED

LED Light Switch

Wide-spaced

AC outlet

Power button and LED

Circuit breaker

Advanced Protection

LED

SAFETY INFORMATION

• RISK OF ELECTRIC SHOCK - Use only in dry locations and only indoors.

• DO NOT plug into another relocatable power tap.

• DO NOT “daisy chain” surge protectors.

• DO NOT use with any aquarium equipment.

• DO NOT use if correctly grounded outlets are not available.

• DO NOT install this device if there is not at least

30 feet (10 meters) or more of wire between

the electrical outlet and electrical service panel.

• This device features internal protection that will disconnect the surge protective component at the end of its useful life, but will maintain power to the load – WHICH WILL BE UNPROTECTED.

If you don't want your equipment at risk, follow the manufacturer’s instructions for replacing

SPECIFICATIONS

Dimensions: 15.2 x 2.56 x 1.4 in. (38.6 x 6.5 x 3.8 cm)

Plug Style:

Cord Length:

Outlets-Total:

Surge Suppression:

Low-profile right angle plug

6 ft. Fabric Covered

7 (1 Wide Spaced)

4080 joules

Maximum Surge Current: 120,000 amps

Response Time: <1 nanosecond

Attenuation:

EMI/RFI Filtration:

Indicators:

Safety:

Environmental:

68 dB

Level 1 (2-stage)

Advanced Protection, Power Filtering,

LED Light Switch

UL1363, UL1449, 3rd Edition UL1310, cUL

RoHS Compliant

Product Warranty: 3 Years

Connected Equipment $800,000

Guarantee:

Coaxial cable connectors

Before using your new product, please read these instructions to prevent any damage.

USING YOUR POWER CENTER

1. Plug the power center into a wall outlet. If the red LED on the power button does not light up, press the circuit breaker.

Notes:

• Connect the extension cables (if needed) to power cords or large

power supplies.

• Connect all cables before turning on your power center. Turn off

the power center when connecting or disconnecting cables.

2. If you need additional USB ports, plug the USB hub into the power center.

3. Plug your devices into the power center's outlets, USB ports, and data line jacks to protect to protect them from power surges.

4. If the Advanced Protection LED turns off, press the circuit breaker to reset your power center.

Note: Advanced Protection LED does not turn back on, your power center cannot absorb additional power surges or spikes.

Replace your power center.

Using the backlights

• Press the LED Light Switch to turn the LEDs on or off. Advanced

Protection and Power Filtering LEDs will always stay lit.

• Slide the switch on the USB power hub to turn the LEDs on or off.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

ICES-003:

This Class B digital apparatus complies with Canadian ICES-003

THREE-YEAR LIMITED WARRANTY

Visit www.rocketfishproducts.com for details.

CONTACT ROCKETFISH:

For customer service please call 1-800-620-2790 www.rocketfishproducts.com

ROCKETFISH is a trademark of Best Buy and its affiliated companies

Distributed by Best Buy Purchasing, LLC

7601 Penn Ave South, Richfield, MN 55423 U.S.A.

©2017 Best Buy. All rights reserved

Made in China

V1 ENGLISH 17-0382

advertisement

Key Features

  • Advanced two-stage power filtration
  • Switchable LED trace lighting
  • 2 on-board USB ports with 4.8A of current
  • Sleek, modern design
  • Advanced fireproof MOVs
  • Status indicator lights
  • Wide-spaced outlet
  • Heavy-duty, low-profile plug
  • Wear-resistant, fabric-wrapped power cord
  • Coax jacks for protecting cable/satellite/internet devices

Frequently Answers and Questions

What is the purpose of the Advanced Protection LED?
The Advanced Protection LED indicates that the power center is working properly and can absorb additional power surges or spikes. If this LED turns off, it means that the power center cannot absorb additional power surges or spikes and needs to be replaced.
How do I use the extension cables included?
Connect the extension cables (if needed) to power cords or large power supplies. Make sure to connect all cables before turning on the power center and turn off the power center when connecting or disconnecting cables.
What are the safety precautions I should take when using this power center?
This power center should only be used in dry locations and indoors. Do not plug it into another relocatable power tap, daisy chain surge protectors, use it with any aquarium equipment, or use it if correctly grounded outlets are not available. Additionally, do not install it if there isn't at least 30 feet (10 meters) of wire between the electrical outlet and electrical service panel.
What happens if the Advanced Protection LED turns off?
If the Advanced Protection LED turns off, it means the power center's internal protection has disconnected the surge protective component. While the power center will maintain power to the load, it will be unprotected. To prevent equipment damage, replace the power center.

Related manuals

Download PDF

advertisement