101-SH - Specialty Lighting Industries
101-SH
SERIES #106 - CONTINUOUS LINEAR STRIP LIGHT
TYPE:
Multi-lamp, low-voltage halogen, surface mounted strip light with
1” x 1” housing.
JOB:
SPECIFIER:
S P E C I F I C AT I O N S
HOUSING - Extruded aluminum with seamless welded and
ground end plates.
MOUNTING - Surface mounted.
ELECTRICAL - Remote transformer should be sized for
the run length. Sold separately.
LAMP - T2¼ - T3 frosted 12v, 20w max. supplied by others
LABELS - UL, C-UL
SOCKET - Precision die formed aluminum socket plate. Nickel
plated steel double contact bayonet base with stainless steel
spring for optimum contact. High temperature silicone lead
wires. Socket pivots for easy relamping.
FINISH - Powder paint on all surfaces available in black white
or RAL colors as standard. Consult factory for custom finishes.
A P P L I C AT I O N S
Used for task, niche or ceiling illumination. May be exposed, mounted in coves or affixed to the underside of shelves and
cabinets.
O R D E R I N G I N F O R M AT I O N
HOUSING
101-SH
LAMP*
LENGTH
L A M P S PA C I N G
FINISH
Surface mounted
linear general
lighting system
10T3 = T3, 12V, 10W
20T3 = T3, 12V, 20W
Specify exact length
4 = 4”
6 = 6”
or custom spacing
WHT = White
BLK = Black
XXXX = RAL #
CST = Custom
*HALOGEN BI-PIN
(supply chip)
This information is provided as a specification aid. A submittal will be prepared by the manufacturer for approval prior to fabricating this product.
© 04/15
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement