INSTALLATION INSTRUCTIONS "
1. INSTALL THE INSIDE LATCH FOLLOWING STANDARD AR BRACKET E?
INSIDE LATCH INSTALLATION TEMPLATE. (FIG 1) TR TOUCH BAR
(Am | 4 / INSIDE LATCH
2. INSTALL THE BAR BRACKET AT THE HINGE SIDE OF THE DOOR, LT / /
MAKE SURE IT IS LEVEL WITH THE INSIDE LATCH. (FIG 1) II
3. INSERT THE TOUCH BAR ALL THE WAY INTO THE LATCH. (FIG 1)
4. PUT THE TOUCH BAR AGAINST THE BAR BRACKET,
MARK A LINE ON THE TOUCH BAR AT THE CENTER LINE OF THE SCREWS,
CUT THE TOUCH BAR OFF AT THE MARK LINE. (FIG 1 8 FIG 2) == ee
5, LOOSEN THE BAR BRACKET, AND INSTALL THE SPRING _ \ Mg, sod as jo =
IN BETWEEN THE BAR BRACKET AND THE TOUCH BAR. ® \ 2
FASTEN WITH THE SCREWS ONTO THE DOOR. (FIG 3 & FIG 4) у |
DE
Vo]
—
/ TAE CENTER LINE OF THE SCREWS SCALE 1:3
SPRING
a BAR BRACKET
BAR BRACKEY - y
FIG 2
FIG3
">
