L16RNX H1488-04

L16RNX H1488-04
L16RNX is a 5” High Fidelity woofer with an injection moulded
metal chassis, intended for bass reflex and transmission line designs.
L16RNX
H1488-04
Stiff, yet light aluminum cone and low loss rubber surround show
no sign of the familiar 500-1500 Hz cone edge resonance and distortion
assosiated with soft cones.
A bumped back plate in the magnet system, together with the very long and light
weight copper clad aluminum voice coil, allow extreme coil excursion with low
distortion.
A heavy copper ring below the T-shaped pole piece reduces non linear and modulation distortion.
Extremely stiff and stable injection moulded metal basket, keeps the critical components in perfect alignment. Large windows in the basket both above and below the
spider reduce sound reflection, air flow noise and cavity resonance to a minimum.
This driver use Seas SpiderRing® technology.
100
50
95
90
40
85
SPL [dB]
30
75
70
20
65
60
Impedance [ohm]
80
10
55
50
10
0
100
1 000
10 000
Frequency [Hz]
The frequency responses above show measured free field sound pressure in 0, 30, and 60 degrees angle using a 10L closed box. Input
2.83 VRMS, microphone distance 0.5m, normalized to SPL 1m.The dotted line is a calculated response in infinite baffle
based on the parameters given for this specific driver. The impedance is measured in free air without baffle using a 2V
sine signal.
Nominal Impedance
4 Ohms
Voice Coil Resistance
3.1 Ohms
Recommended Frequency Range
45 - 2000 Hz
Voice Coil Inductance
0.32 mH
Short Term Power Handling *
250 W
Force Factor
5.4 N/A
Long Term Power Handling *
80 W
Free Air Resonance
37 Hz
Characteristic Sensitivity (2,83V, 1m) 88 dB
Moving Mass
14.7 g
Voice Coil Diameter
Air Load Mass In IEC Baffle
0.62 g
39 mm
Voice Coil Height
18 mm
Suspension Compliance
1.3 mm/N
Air Gap Height
6 mm
Suspension Mechanical Resistance
1.54 Ns/m
Linear Coil Travel (p-p)
12 mm
Effective Piston Area
104 cm2
Maximum Coil Travel (p-p)
22 mm
VAS
18 Litres
Magnetic Gap Flux Density
1.05 T
QMS
2.31
Magnet Weight
0.42 kg
QES
0.38
Total Weight
1.80 kg
QTS
0.33
Dec 2007-1
RoHS compliant product
*IEC 268-5
SEAS reserves the right to change technical data
www.seas.no
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement