null  null
Single & Three Phase Ferroresonant
Industrial Battery Chargers
The Battery-Mate 80 is Quality
Designed to Provide Efficent,
Problem Free Charging Everytime
The Battery-Mate 80 is engineered for one and
two shift operations. Manufactured to meet
the most stringent requirements of industrial
and distribution applications.
It is rated to recharge normally discharged
batteries in 8 hours or less.
• Charges 80% discharged batteries in
8 hours or less
• Interchangeable control design
• Economically priced
• Fail-safe design
• Quality-built for years of trouble-free
service
• Ten-year transformer & diode warranty
• UL and cUL listed and meets BCI standards
For Dependable
Compact cabinet
minimizes floor space
180 degree
hinged door for
easy access of
components
Prominently
displayed labels
• Voltage
change-over
• Fuse sizes
• Charging rate
adjustment
Baked powdered
polyester finish
Ferroresonant power
transformers with
10-year warranty
Modular
designed
controls for
increased
flexibility
Color coded
charging cables
Designed for Quality & Value
Interchangeable Control Design
Single & Three Phase Service
The Battery-Mate 80 is an industrial-rated
charger, value-designed and extensively
engineered to furnish an efficient,
problem-free charge each time a battery
is connected. Sized and rated to charge
80% discharged batteries in 8 hours or
less, the Battery-Mate 80 uses
ferroresonant power conversion circuitry,
which is virtually maintenance-free,
to provide years of dependable service.
The power conversion circuitry maximizes
battery life by using a constantly tapering
charge which is automatically regulated
by the “On Charge” battery voltage.
The output current of the charger is
determined by the state of discharge
of the battery. The battery is precisely
charged, based on its depth of discharge.
The Battery-Mate 80 is designed to allow
the quick and easy installation or removal
of the controls. Unmatched in the industry,
this design allows controls to be
inter-changed in minutes for greater
control, flexibility and automation of
any battery charging operation.
The Battery-Mate 80 is available in a
variety of single or three phase models.
Each model provides multiple AC input
voltages for increased flexibility of the
charging operation.
Low Operating Cost
The Battery-Mate 80 is inherently
efficient due to its ferroresonant circuitry,
the most utilized method of charging lead
acid batteries.
Control Options
Depending on your charging requirements,
the Battery-Mate 80 can be controlled
by any one of the following controls:
AC1000 and AC2000.
Automatic Operation
After the battery is connected, the
Battery-Mate 80 will automatically start
the charging operation. When the battery
is fully charged, the charger will
automatically terminate the operation.
Easy to Change AC Input Voltage
AC input voltage change-overs take just
minutes because of conveniently located
taps and quick-connect jumpers.
Adjustable DC Output
In rare instances where changes to the
DC output might be required, necessary
adjustments are made simple with
conveniently located quick-connect jumpers.
Rating
The Battery-Mate 80 is rated to
recharge a 80% discharged battery in its
ampere-hour rating within eight hours.
& Efficient Charging Every Time!
Regulation
100% Finish Rate
The Battery-Mate 80 will hold the finish
rate of the charge within ±1%, even with
line voltage variations as high as ±10%.
This protects, and properly charges the
battery, even when severe input voltage
variations exist.
The Battery-Mate 80 is designed to
provide a higher finish rate than other
similarly rated 80% chargers. Because of
the Battery-Mate 80’s higher finish rate,
batteries receive the precise recharge
characteristics they require to maximize
battery life.
Convection Cooled & Quiet
The Battery-Mate 80 uses no fans to
draw in dirty air and has low sound
levels for quiet operation.
The Battery-Mate 80 is internally
protected against overload, short circuit,
reverse polarity connection, voltage
transients and other unsafe failure
modes. These safeguards protect the
charger and battery, assuring longer
life for both.
Warranty
Minimize repair costs with ten year
original purchaser warranty on power
transformers and silicon diodes, plus
one year warranty on other components.
Accessible Cabinet Design
The Battery-Mate 80 has been designed
to conveniently facilitate charger
adjustment and any necessary service
or maintenance requirements. The front
door opens to 180 degrees to provide
easy access to all major components.
Minimizes Floor Space
Because of its compact cabinet, the
Battery-Mate 80 requires a minimum
amount of floor space. All case styles can
be wall, bench or floor mounted and all
cases are stackable up to 3 high to save
more floor space.
UL, cUL and BCI
Most Battery-Mate 80 models are UL and
cUL listed and meet BCI standards, adding
further support to the “safety first” design.
“M” Case
16.58"
7
6
5
BATTERY-MATE 80
14.50"
MTG.
4
AMPS
Battery Charger Safeguards
Dimensions
1.55"
17.09"
3
2.78"
OTHER 80% CHARGERS
2
1
0
6.0
6.5
7.0
7.5
8.0
8.5
20.23"
HOURS
The above graph shows the last two
hours of the charge cycle and illustrates
the higher finish rate of the Battery-Mate
80. The output current of the Battery-Mate
80 at finish is 4.5 amps per 100A-H of
the battery, compared to 2.6 amps for
most other 80% chargers.
6.13"
4.19"
14.00"
MTG.
1.55"
“H” Case
Quality-Built for Years of
Trouble-Free Service
26.23"
(666.3 mm)
The Battery-Mate 80, as with all our
products, is engineered to meet the
everyday challenges associated with
charging batteries. Unmatched in
construction, reliability and value, the
Battery-Mate 80 is subject to intensive
quality control and test procedures to
ensure many years of trouble-free service.
19.38"
(492.1 mm)
21.47"
(545.3 mm)
Knockouts for AC
power
cable and SDAC cable
Sizes: 1.063 (26.99) D.
1.375 (34.93) D.
1.688 (42.86) D.
22.5"
(571.5 mm)
12.54"
(318.5 mm)
6.00"
(152.4 mm)
17.19"
(436.6 mm)
Disconnect switch
(when furnished)
.500 (12.70) D.
4 MTG. holes
with matching holes
in top for stacking
17.75"
(450.9 mm)
20.47"
(599.3 mm)
1.36"
(34.5 mm)
Single & Three Phase Ferroresonant
Industrial Battery Chargers
Battery-Mate 80 Models
Control Features
Amp
Hour
DC
Volts
DC
Amps
@120
VAC
@208
VAC
@240
VAC
@480
VAC
@575
VAC
380M1-6C
450M1-6C
510M1-6C
600M1-6C
250M1-12C
380M1-12C
450M1-12C
510M1-12C
600M1-12C
750M1-12C
880M1-12C
965H1-12C
510M1-18C
600M1-18C
750M1-18C
880H1-18C
965H1-18C
1050H1-18C
1275H1-18C
450M1-24C
510M1-24C
600M1-24C
750H1-24C
380
450
510
600
250
380
450
510
600
750
880
965
510
600
750
880
965
1050
1275
450
510
600
750
12
12
12
12
24
24
24
24
24
24
24
24
36
36
36
36
36
36
36
48
48
48
48
65
77
87
102
43
65
77
87
102
128
150
164
87
102
128
150
164
179
216
77
87
102
128
10.8
12.9
13.6
6.2
7.4
7.9
10.2
7.5
12.1
13.8
15.6
18.5
25.2
29.2
30.8
22.1
28
35.6
42.2
44.3
45
N/A
25.7
29.9
36
47
5.4
6.4
6.8
8.9
6.6
10.5
12
13.6
16.1
21.9
25.4
26.9
19.3
24.4
31
36.6
38.4
37
50.6
22.4
26.1
31.4
40.8
2.7
3.2
3.4
4.4
3.3
5.3
6
6.8
8.1
11
12.7
13.4
9.6
12.2
15.5
18.3
19.2
19.5
25.3
11.2
13
15.7
20.4
2.2
2.7
4.9
3.7
2.7
4.4
5
5.6
6.7
9.1
10.6
11.2
8
10.1
12.9
15.3
16
16.3
21.1
9.3
10.8
13
17
13.1
21
Three Phase Models
Model #
600H3-6C
510H3-12C
600H3-12C
750H3-12C
880H3-12C
965H3-12C
1050H3-12C
1260H3-12C
510H3-18C
600H3-18C
750H3-18C
880H3-18C
965H3-18C
1050H3-18C
1260H3-18C
1400H3-18C
380H3-24C
600H3-24C
750H3-24C
880H3-24C
965H3-24C
1050H3-24C
1260H3-24C
510H3-40C
600H3-40C
750H3-40C
Amp
Hour
DC
Volts
DC
Amps
600
510
600
750
880
965
1050
1260
510
600
750
880
965
1050
1200
1400
380
600
750
880
965
1050
1260
510
600
750
12
24
24
24
24
24
24
24
36
36
36
36
36
36
36
36
48
48
48
48
48
48
48
80
80
80
102
87
102
128
150
164
179
214
87
102
128
150
164
179
214
238
65
102
128
150
164
179
214
87
102
128
Cabinet
Size
M
M
M
M
M
M
M
M
M
M
M
H
M
M
M
H
H
H
H
M
M
M
H
@120
VAC
Automatic start/stop
Timed delay start
PT/DV/DT termination
VT termination
Universal control for 6,12,18, 24,36 cell
Back-up timers
AC fail recovery
Battery/charger mismatch protection
Refresh charge
Automatic equalize
Full battery reject
@208
VAC
@240
VAC
@480
VAC
@575
VAC
5.3
8.9
10.9
12.7
15.2
16.6
17.5
21.3
13
14.7
18.2
21.9
23.5
25.8
31.8
32.3
13.3
18.8
24
27
31.1
35
43.5
27.9
34.6
46.6
4.6
7.8
9.5
11
13.3
14.5
15.2
18.6
11.3
12.8
15.8
19.1
20.5
22.5
27.7
28
11.5
16.4
20.9
23.5
27.1
30.5
37.7
24.2
30
40.4
2.3
3.9
4.8
5.5
6.6
7.2
7.6
9.3
5.7
6.4
7.9
9.5
10.2
11.2
13.9
14
5.8
8.2
10.5
11.8
13.6
15.3
18.9
12.1
15
20.2
1.9
3.2
3.9
4.6
5.5
6
6.3
7.7
4.7
5.3
6.6
7.9
8.5
9.3
11.5
11.7
4.8
6.8
8.7
9.8
11.3
12.7
15.7
10.1
12.5
16.9
Cabinet
Size
Because we continually improve our products,
specifications are subject to change without notice.
©2009, AMETEK, Inc. Prestolite Power, Troy, Ohio
Data Sheet: 1309 6/13 5M Printed in U.S.A.
Replaces: 9/09
H
H
H
H
H
H
H
H
H
H
H
H
H
H
H
H
H
H
H
H
H
H
H
H
H
H
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Modular design
Optional start modes
Forming cycles
Extended run time
Optional equalize modes
Data-Mate compatible
99 cycle archive
•
Cool down
Thermal runaway protection
80% volts/cell
AC power/reset charge cycle option
DISTRIBUTED BY:
2220 Corporate Drive • Troy, Ohio 45373
Phone: 800.367.2002 • Fax: 800.654.4024
www.prestolitepower.com
95
105
110
115
105
110
120
120
145
150
175
215
175
180
190
290
335
350
385
170
175
190
310
Max AC Amps RMS
AC Input Configurations Available: 120/208/240, 208/240/480, 480/575
Manufactured by
Weight
Lbs.
0
AC
200
0
Max AC Amps RMS
Model #
AC
100
Single Phase Models
Model
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Weight
Lbs.
185
190
195
200
240
245
250
280
220
240
275
285
295
300
325
390
195
280
285
330
360
365
425
360
365
425
Full Line of Automatic
Start/Stop Controls
Series
AC1000
Series
AC2000
For more charger control information, see the following:
AC1000 – data sheet 1322
AC2000 – data sheet 1320
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement