CompactFlash Plus adapter card Features
CompactFlash Plus adapter card
Octagon’s 2852 is a PC/104 Plus expansion card that
provides a single CompactFlash slot. The single
CompactFlash or CompactFlash Plus (CF+) socket is
compliant with the CompactFlash Revision 1.4. These
cards can be either Type I or Type II format. Both
memory mode and I/O mode are supported.
The socket has an ejector button for easy removal of
cards. The socket supports both 5V and 3.3V cards. A
CompactFlash card is connected through the PC/104
Plus connector as a PCI device and provides higher performance than the 16-bit PC/104 Bus. The PC/104 Plus
expansion bus supports mastering devices.
2852 CompactFlash Plus adapter card
SLOT
N
Set via jumpers, default is slot 1
ENVIRONMENTAL &
Features
COMPACTFLASH
NUMBER:
SLOT:
N
Accepts CompactFlash and CF+ devices
N
3.3V or 5V cards, automatic voltage switcher
N
Type I and II cards
N
Ejector button for easy card removal.
DRIVERS :
N
Fully compatible with Windows® 95 through
Windows 2000, and Windows XP Embedded
N
Linux support with kernel 2.4.12 or later
N
QNX 6.1 PC card driver required
POWER:
N
–40° to 85° C operating
N
–55° to 95° C nonoperating
N
5% to 95%, RH, noncondensing
N
Up to 40g shock, 3 axis
N
Up to 5g vibration, 3 axis
N
Size 3.550" x 3.755" x 0.535",
PC/104 Plus form factor
N
5V ±5%, 170 mA maximum; drawn from PC/104
Plus connector
N
Up to 1A supplied to CompactFlash devices.
ORDERING
INFORMATION
#6530 2852 CompactFlash Plus adapter card
1
6510 W. 91st Avenue • Westminster CO 80031 • 303-430-1500
www.octagonsystems.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement