advertisement
8
TIMES
MICROWAVE SYSTEMS
LMR
®
-100A
Flexible Low Loss Communications Coax
Ideal for…
• Drop-in Replacement for RG-316/RG-174 (uses standard connectors)
• Jumper Assemblies in Wireless Communications Systems
• Short Antenna Feeder runs
• Any application (e.g. WLL, GPS, LMR, WLAN, WISP, WiMax,
SCADA, Mobile Antennas) requiring an easily routed,
low loss RF cable
• LMR
®
- PVC
is designed for low loss general-purpose indoor/outdoor applications and is somewhat more flexible than the standard polyethylene jacketed LMR.
• LMR
®
- PVC-W
is a white-jacketed version of LMR-
PVC for marine and other indoor/outdoor applications where color compatibility is desired.
• Flexibility and bendability are hallmarks of the LMR-
100A cable design. The flexible outer conductor enables the tightest bend radius available for any cable of similar size and performance.
• Low Loss
is another hallmark feature of LMR-100A.
Size for size LMR has the lowest loss of any flexible cable and comparable loss to semirigid hard-line cables.
• RF Shielding
is 50 dB greater than typical single shielded coax (40 dB). The multi-ply bonded foil outer conductor is rated conservatively at > 90 dB (i.e. >180 dB between two adjacent cables).
• Weatherability: LMR-100A cables designed for outdoor exposure incorporate the best materials for
UV resistance and have life expectancy in excess of 20 years.
• Connectors: A wide variety of connectors are available for LMR-100A cable, including all common interface types, reverse polarity, and a choice of solder or non-solder center pins. Most LMR connectors employ crimp outer attachment using standard hex crimp sizes.
• Cable Assemblies: All LMR-100A cable types are available as pre-terminated cable assemblies. Refer to the section on FlexTech for further details.
Part Number
Part Description
Application
Stock
Jacket Color Code
LMR-100A-FR Indoor-Riser CMR FRPE Black 54037
LMR-100A-PVC Indoor/Outdoor PVC Black 54119
LMR-100A-PVC-W Indoor/Outdoor PVC White 54200
PVC = Poly Vinyl Chloride; MTO = Made to Order
Construction Specifications
Description Material In.
Inner Conductor
Dielectric
Outer Conductor
Overall Braid
Jacket
Solid BCCS
Solid PE
Aluminum Tape
Tinned Copper
(see table above)
0.018
0.060
0.065
0.083
0.110
Mechanical Specifications
Performance Property Units US (metric)
Bend Radius: installation
Bend Radius: repeated
Bending Moment
Weight
Tensile Strength
Flat Plate Crush in. (mm) in. (mm) ft-lb (N-m) lb/ft (kg/m) lb (kg) lb/in. (kg/mm)
0.25
1
(6.4)
(25.4)
0.1 (0.014)
0.0092 (.014)
15
10
(6.8)
(0.18)
(mm)
(0.46)
(1.52)
(1.65)
(2.11)
(2.79)
Environmental Specifications
Performance Property
Installation Temperature Range
Storage Temperature Range
Operating Temperature Range
0
F o
C
-40/+185 -40/+85
-94/+185 -70/+85
-40/+185 -40/+85
Electrical Specifications
Performance Property Units US
Cutoff Frequency
Velocity of Propagation
Dielectric Constant
Time Delay
Impedance
Capacitance
Inductance
Shielding Effectiveness
DC Resistance
Inner Conductor
Outer Conductor
Voltage Withstand
Jacket Spark
Peak Power
(metric)
GHz
%
NA nS/ft (nS/m) ohms pF/ft (pF/m) uH/ft (uH/m) dB
63
66
2.30
1.54 (5.05)
50
30.8 (101.1)
0.077 (0.25)
>90 ohms/1000ft (/km) 81.0 (266) ohms/1000ft (/km) 9.5
Volts DC 500
(31.2)
Volts RMS kW
2000
0.6
(800) TMS-COAX • www.timesmicrowave.com
Attenuation vs. Frequency (typical)
TIMES
MICROWAVE SYSTEMS
100
10
1
10 100
Frequency (MHz)
1,000 10,000
Frequency (MHz)
Avg. Power kW
30
Attenuation dB/100 ft
3.9
Attenuation dB/100 m 12.9
50
5.1
16.7
150
8.9
29.4
220
10.9
35.8
450
15.8
51.9
900
22.8
74.9
1500 1800
30.1
98.7
33.2
109.0
2000 2500
35.2
115.5
39.8
130.6
5800
64.1
210.3
0.230 0.180 0.100 0.083 0.057 0.039 0.029 0.027 0.025 0.022 0.013
Calculate Attenuation = (0.709140) • FMHz + (0.001740) • FMHz (interactive calculator available at http://www.timesmicrowave/telecom)
Attenuation: VSWR=1.0 ; Ambient = +25°C (77°F) Power: VSWR=1.0; Ambient = +40°C; Inner Conductor = 100°C (212°F);
Sea Level; dry air; atmospheric pressure; no solar loading
Interface Description
Part
Number
Stock
Code
TC-100-SM TC-100-TM
Connectors
Inner Outer Finish*
VSWR ** Coupling Contact Contact Body Length Width Weight
Freq. (GHz) Nut Attach Attach /Pin in (mm) in (mm) lb (g)
SMA male Straight Plug
TNC male Straight Plug
TC-100-SM
TC-100-TM
3190-1551
3190-1552
<1.25:1 (<3 ) Hex
<1.25:1 (<3 ) Knurl
Solder
Solder
Crimp
Crimp
SS/G 1.0 (25.4) 0.32 (8.1) 0.015 (6.8)
S/G 1.4 (35.6) 0.59 (15.0) 0.045 (20.4)
* Finish metals: N=Nickel, S=Silver, G=Gold, SS=Stainless Steel, A=Alballoy **VSWR spec based on 3 foot cable with a connector pair
Install Tools
Part Number Stock Code Description Type
Crimp Tool
Cutting Tool
Replacement Blade
CT-240/200/195/100 3190-667
CCT-01 3190-1544
RB-01 3190-1609
Crimp tool for LMR-100, 195, 200 and 240 connectors
Cable end flush cut tool
Replacement blade for cutting tool
(800) TMS-COAX • www.timesmicrowave.com
CCT-01
9
TIMES
MICROWAVE SYSTEMS
LMR
®
-195
Flexible Low Loss Communications Coax
Ideal for…
• Jumper Assemblies in Wireless Communications Systems
• Short Antenna Feeder runs
• Any application (e.g. WLL, GPS, LMR, WLAN, WISP, WiMax,
SCADA, Mobile Antennas) requiring an easily routed,
low loss RF cable
• Drop-in replacement for RG-58 and RG-142
• LMR
® standard is a UV Resistant Polyethylene jacketed cable designed for 20-year service outdoor use. The bending and handling characteristics are significantly better than air-dielectric and corrugated hard-line cables.
• LMR
®
- DB
is identical to standard LMR plus has the advantage of being watertight. The addition of waterproofing compound in and around the foil/braid insures continuous reliable service should the jacket be inadvertently damaged during installation or in the future.
• LMR
®
- FR
is a non-halogen (non-toxic), low smoke, fire retardant cable designed for in-building runs that can be routed anywhere except air handling plenums. LMR-
FR has a UL/NEC & CSA rating of ‘CMR’ and ‘FT4’ respectively. In addition, the LMR-FR series is MSHA-P rated for mining operations.
• LMR
®
- FR-PVC
is a general-purpose indoor cable and has a UL/NEC & CSA rating of ‘CMR’ and ‘FT4’ respectively. It is less expensive than LMR-FR, however it emits toxic fumes (HCL) and greater smoke density when burned.
• LMR
®
- PVC
is designed for low loss general-purpose indoor/outdoor applications and is somewhat more flexible than the standard polyethylene jacketed LMR.
• LMR
®
- PVC-W
is a white-jacketed version of LMR-
PVC for marine and other indoor/outdoor applications where color compatibility is desired.
• LMR
®
- MA
is a flexible cable designed specifically for mobile antenna applications. It has a PVC jacket and un-bonded aluminum tape to facilitate end stripping with automated equipment.
• Low Loss is another hallmark feature of LMR-195.
Size for size LMR has the lowest loss of any flexible cable and comparable loss to semirigid hard-line cables.
• RF Shielding
is 50 dB greater than typical single shielded coax (40 dB). The multi-ply bonded foil outer conductor is rated conservatively at > 90 dB (i.e. >180 dB between two adjacent cables).
• Weatherability: LMR-195 cables designed for outdoor exposure incorporate the best materials for UV resistance and have life expectancy in excess of 20 years.
• Connectors:
A wide variety of connectors are available for LMR-195 cable, including all common interface types, reverse polarity, and a choice of solder or nonsolder center pins. Most LMR connectors employ crimp outer attachment using standard hex crimp sizes.
• Cable Assemblies:
All LMR-195 cable types are available as pre-terminated cable assemblies. Refer to the section on FlexTech for further details.
Part Number
Part Description
Application
Stock
Jacket Color Code
LMR-195
LMR-195-DB
Outdoor
Outdoor/Watertight
LMR-195-FR Indoor-Riser CMR
LMR-195-FR-W Indoor-Riser CMR
LMR-195-FR-PVC Indoor-Riser CMR
LMR-195-MA Mobile Antennas
LMR-195-PVC Indoor/Outdoor
LMR-195-PVC-W Indoor/Outdoor
PE Black 54110
PE Black 54113
FRPE Black 54111
FRPE White 54158
FRPVC Black 54105
PVC Black 54210
PVC Black 54215
PVC White 54199
• Flexibility and bendability are hallmarks of the LMR-
195 cable design. The flexible outer conductor enables the tightest bend radius available for any cable of similar size and performance.
10
Construction Specifications
Description Material In. (mm)
Inner Conductor
Dielectric
Outer Conductor
Overall Braid
Jacket
Solid BC
Foam PE
Aluminum Tape
Tinned Copper
(see table above)
0.037 (0.94)
0.110 (2.79)
0.116 (2.95)
0.139 (3.53)
0.195 (4.95)
(800) TMS-COAX • www.timesmicrowave.com
Mechanical Specifications
Performance Property Units US (metric)
Bend Radius: installation
Bend Radius: repeated
Bending Moment
Weight
Tensile Strength
Flat Plate Crush in. (mm) in. (mm) ft-lb (N-m) lb/ft (kg/m) lb (kg) lb/in. (kg/mm)
0.5
2.0
(12.7)
(50.8)
0.2 (0.27)
0.021 (0.03)
40
15
(18.2)
(0.27)
Environmental Specifications
Performance Property
Installation Temperature Range
Storage Temperature Range
Operating Temperature Range
0
F o
C
-40/+185 -40/+85
-94/+185 -70/+85
-40/+185 -40/+85
TIMES
MICROWAVE SYSTEMS
Electrical Specifications
Performance Property Units US (metric)
Cutoff Frequency
Velocity of Propagation
Dielectric Constant
Time Delay
Impedance
Capacitance
Inductance
Shielding Effectiveness
DC Resistance
Inner Conductor
Outer Conductor
Voltage Withstand
Jacket Spark
Peak Power
GHz
%
NA nS/ft (nS/m) ohms pF/ft (pF/m) uH/ft (uH/m) dB
25.4
76
1.56
1.27 (4.17)
50
(83.3)
0.064 (0.21)
>90
41 ohms/1000ft (/km) 7.6 ohms/1000ft (/km) 4.9
Volts DC
Volts RMS kW
1000
3000
2.5
(24.9)
(16.1)
Attenuation vs. Frequency (typical)
100.0
10.0
1.0
10
Frequency (MHz)
Attenuation dB/100 ft
Attenuation dB/100 m
Avg. Power kW
30
2.0
6.5
0.89
50
2.5
8.4
0.68
100
Frequency (MHz)
150 220
4.4
14.6
0.39
5.4
17.7
0.32
450
7.8
25.5
0.22
900
1,000 10,000
1500 1800 2000 2500 5800
11.1 14.5 16.0 16.9 19.0 29.9
36.5 47.7 52.5 55.4 62.4 98.1
0.16 0.12 0.11 0.10 0.09 0.06
Calculate Attenuation = (0.356859) • FMHz + (0.000470) • FMHz (interactive calculator available at http://www.timesmicrowave.com/cable_calculators)
Attenuation: VSWR=1.0 ; Ambient = +25°C (77°F) Power: VSWR=1.0; Ambient = +40°C; Inner Conductor = 100°C (212°F);
Sea Level; dry air; atmospheric pressure; no solar loading
Interface
TC-195-NM
Description
Part
Number
TC-195-SM
Connectors
TC-195-TM
Stock
Code Freq. (GHz) Nut
Inner Outer Finish*
VSWR** Coupling Contact Contact Body Length Width Weight
Attach Attach /Pin in (mm) in (mm) lb (g)
N male
SMA male
Straight Plug
Straight Plug
TC-195-NM
TC-195-SM
3190-1555 <1.25:1 (2.5)
3190-1553 <1.25:1 (2.5)
Knurl
Hex
Solder
Solder
Crimp
Crimp
S/G
SS/G
1.5 (38.1) 0.75 (19.1) 0.073 (33.1)
1.0 (25.4) 0.32 (8.1) 0.015 (6.8)
TNC male Straight Plug TC-195-TM 3190-1554 <1.25:1 (2.5) Knurl Solder Crimp S/G 1.4 (35.6) 0.59 (15.0)
* Finish metals: N=Nickel, S=Silver, G=Gold, SS=Stainless Steel, A=Alballoy **VSWR spec based on 3 foot cable with a connector pair
0.045 (20.4)
Install Tools
Part Number Stock Code Description Type
Crimp CT-240/200/195/100 3190-667
Tool
Deburr Tool DBT-U
Replacement RB-01
Blade
Cutting Tool CCT-01 3190-1544
3192-001
3190-1609
Crimp tool for LMR-100,195,
200 and 240 connectors
Cable end flush cut tool
Removes center conductor rough edges
Replacement blade for cutting tool
CT-240/200/195/100
DBT-U
CCT-01
(800) TMS-COAX • www.timesmicrowave.com
11
TIMES
MICROWAVE SYSTEMS
LMR
®
-200
Flexible Low Loss Communications Coax
Ideal for…
• Jumper Assemblies in Wireless Communications Systems
• Short Antenna Feeder runs
• Any application (e.g. WLL, GPS, LMR, WLAN, WISP, WiMax,
SCADA, Mobile Antennas) requiring an easily routed,
low loss RF cable
• LMR
® standard is a UV Resistant Polyethylene jacketed cable designed for 20-year service outdoor use. The bending and handling characteristics are significantly better than air-dielectric and corrugated hard-line cables.
• LMR
®
- DB
is identical to standard LMR plus has the advantage of being watertight. The addition of waterproofing compound in and around the foil/braid insures continuous reliable service should the jacket be inadvertently damaged during installation or in the future.
• LMR
®
- FR
is a non-halogen (non-toxic), low smoke, fire retardant cable designed for in-building runs that can be routed anywhere except air handling plenums. LMR-FR has a UL/NEC & CSA rating of
‘CMR’ and ‘FT4’ respectively. In addition, the LMR-
FR series is MSHA-P rated for mining operations.
• LMR
®
- FR-PVC
is a general-purpose indoor cable and has a UL/NEC & CSA rating of ‘CMR’ and
‘FT4’ respectively. It is less expensive than LMR-
FR, however it emits toxic fumes (HCL) and greater smoke density when burned.
• LMR
®
- PVC
is designed for low loss generalpurpose indoor/outdoor applications and is somewhat more flexible than the standard polyethylene jacketed
LMR.
• LMR
®
- PVC-W
is a white-jacketed version of
LMR-PVC for marine and other indoor/outdoor applications where color compatibility is desired.
• LMR
®
- MA
is a flexible cable designed specifically
• Flexibility and bendability are hallmarks of the
LMR-200 cable design. The flexible outer conductor enables the tightest bend radius available for any cable of similar size and performance.
• Low Loss is another hallmark feature of LMR-200.
Size for size LMR has the lowest loss of any flexible cable and comparable loss to semirigid hard-line cables.
• RF Shielding
is 50 dB greater than typical single shielded coax (40 dB). The multi-ply bonded foil outer conductor is rated conservatively at > 90 dB (i.e. >180 dB between two adjacent cables).
• Weatherability: LMR-200 cables designed for outdoor exposure incorporate the best materials for UV resistance and have life expectancy in excess of 20 years.
• Connectors:
A wide variety of connectors are available for LMR-200 cable, including all common interface types, reverse polarity, and a choice of solder or nonsolder center pins. Most LMR connectors employ crimp outer attachment using standard hex crimp sizes.
• Cable Assemblies:
All LMR-200 cable types are available as pre-terminated cable assemblies. Refer to the section on FlexTech for further details.
Part Number
Part Description
Application
Stock
Jacket Color Code
LMR-200
LMR-200-DB
Outdoor
Outdoor/Watertight
PE
PE
Black 54022
Black 54089
LMR-200-FR Indoor-Riser CMR FRPE Black 54028
LMR-200-FR-PVC Indoor-Riser CMR FRPVC Black 54125
LMR-200-PVC Indoor/Outdoor
LMR-200-PVC-W Indoor/Outdoor
LMR-200-MA Mobile Antennas
PVC
PVC
PVC
Black 54216
White 54201
Black 54045
PE = Poly Vinyl Chloride FRPE = Fire Retardant Polyethylene (Non-Halo-
Construction Specifications
Description Material In. (mm)
Inner Conductor
Dielectric
Outer Conductor
Overall Braid
Jacket
Solid BC
Foam PE
Aluminum Tape
Tinned Copper
(see table above)
0.044 (1.12)
0.116 (2.95)
0.121 (3.07)
0.144 (3.66)
0.195 (4.95)
12
(800) TMS-COAX • www.timesmicrowave.com
Mechanical Specifications
Performance Property Units US (metric)
Bend Radius: installation
Bend Radius: repeated
Bending Moment
Weight
Tensile Strength
Flat Plate Crush in. (mm) in. (mm) ft-lb (N-m) lb/ft (kg/m) lb (kg) lb/in. (kg/mm)
0.5
2
(12.7)
(50.8)
0.2 (0.27)
0.022 (0.03)
40
15
(48)
(0.27)
Environmental Specifications
Performance Property
Installation Temperature Range
Storage Temperature Range
Operating Temperature Range
0
F o
C
-40/+185 -40/+85
-94/+185 -70/+85
-40/+185 -40/+85
TIMES
MICROWAVE SYSTEMS
Electrical Specifications
Performance Property Units US
Cutoff Frequency
Velocity of Propagation
Dielectric Constant
Time Delay
Impedance
Capacitance
Inductance
Shielding Effectiveness
DC Resistance
Inner Conductor
Outer Conductor
Voltage Withstand
Jacket Spark
Peak Power
(metric)
GHz
%
NA
39
83
1.45
nS/ft (nS/m) ohms pF/ft (pF/m) uH/ft (uH/m)
1.22 (4.02)
50
24.5 (80.3)
0.061 (0.20)
>90 dB ohms/1000ft (/km) 5.36 (17.6) ohms/1000ft (/km) 4.9 (16.1)
Volts DC
Volts RMS kW
1000
3000
2.5
Attenuation vs. Frequency (typical)
100.0
10.0
1.0
10 100 1,000 10,000
Frequency (MHz)
Frequency (MHz) 30 50 150 220 450 900 1500 1800 2000 2500 5800
Attenuation dB/100 ft
1.8 2.3 4.0 4.8 7.0 9.9 12.9 14.2 15.0 16.9 26.4
Attenuation dB/100 m 5.8
7.5 13.1 15.9 22.8 32.6 42.4 46.6 49.3 55.4 86.5
Avg. Power kW
1.02 0.79 0.45 0.37 0.26 0.18 0.14 0.13 0.12 0.11 0.07
Calculate Attenuation =
(0.320900) • FMHz + (0.000330) • FMHz (interactive calculator available at http://www.timesmicrowave.com/cable_calculators)
Attenuation:
VSWR=1.0; Ambient = +25°C (77°F)
Power:
VSWR=1.0; Ambient = +40°C; Inner Conductor = 100°C (212°F); Sea Level; dry air; atmospheric pressure; no solar loading
(800) TMS-COAX • www.timesmicrowave.com
13
14
TIMES
MICROWAVE SYSTEMS
LMR
®
-200
Flexible Low Loss Communications Coax
TC-200-BM
TC-200-MUHF
EZ-200-NM
EZ-200-NMH-D
TC-200-NM
TC-200-NM-RP TC-200-SM
TC-200-SM-RP EZ-200-TM
TC-200-TMC EZ-200-TM-RP
TC-200-TF
EZ-200-TF-RP
Interface Description
Part
Number
Connectors
Stock
Code Freq. (GHz) Nut
Inner Outer Finish*
VSWR** Coupling Contact Contact Body Length Width Weight
Attach Attach /Pin in (mm) in (mm) lb (g)
BNC male
Mini-UHF
N male
N male
N male
N male
Straight Plug
Straight Plug
Straight Plug
Straight Plug
TC-200-BM 3190-225 <1.25:1 (2.5)
TC-200-MUHF 3190-444 <1.25:1 (2.5)
EZ-200-NM 3190-1475 <1.25:1 (8)
EZ-200-NMH-D 3190-1918 <1.25:1 (8)
Straight Plug TC-200-NM 3190-224 <1.25:1 (2.5)
Reverse Polarity TC-200-NM-RP 3190-959 <1.25:1 (2.5)
Knurl
Knurl
Knurl
Hex/Knurl Spring Fit Crimp
Knurl
Knurl
Solder Crimp
Solder Crimp
Spring Fit Crimp
Solder
Solder
Crimp
Crimp
S/G 1.7 (43.2) 0.56 (14.2) 0.045 (20.4)
NG 1.1 (27.9) 0.45 (11.4) 0.015 (6.8)
S/G 1.5 (38.1) 0.75 (19.1) 0.073 (33.1)
A/G 1.5 (38.1) 0.75 (19.1) 0.073 (33.1)
SMA male
SMA male
TNC male
TNC male
Straight Plug
Straight Plug
Straight Plug
TC-200-SM
EZ-200-TM
TC-200-TMC
3190-612 <1.25:1 (8)
Reverse Polarity TC-200-SM-RP 3190-327 <1.25:1 (2.5)
3190-1266 <1.25:1 (2.5)
3190-240 <1.25:1 (2.5)
TNC male Reverse Polarity EZ-200-TM-RP 3190-792 <1.25:1 (2.5)
TNC female Straight Jack TC-200-TF 3190-263 <1.25:1 (2.5)
Hex
Hex
Knurl
Knurl
Knurl
NA
Solder
Solder
Crimp
Crimp
Spring Fit Crimp
Solder Clamp
Spring Fit Crimp
Solder Crimp
S/G 1.5 (38.1) 0.75 (19.1) 0.073 (33.1)
N/G 1.5 (38.1) 0.75 (19.1) 0.073 (33.1)
SS/G 1.0 (25.4) 0.32 (8.1) 0.015 (6.8)
SS/G 1.0 (25.4) 0.32 (8.1) 0.015 (6.8)
S/G 1.4 (35.6) 0.59 (15.0) 0.045 (20.4)
S/G 1.7 (43.2) 0.59 (15.0) 0.045 (20.4)
A/G
N/G
1.4 (35.6) 0.32 (8.1) 0.045 (20.4)
1.3 (33.0) 0.57 (14.5) 0.033 (15.0)
TNC female Reverse Polarity EZ-200-TF-RP 3190-793 <1.25:1 (2.5) NA Spring Fit Crimp A/G 1.3 (33.0) 0.57 (14.5) 0.033 (15.0)
* Finish metals: N=Nickel, S=Silver, G=Gold, SS=Stainless Steel, A=Alballoy **VSWR spec based on 3 foot cable with a connector pair
(800) TMS-COAX • www.timesmicrowave.com
TIMES
MICROWAVE SYSTEMS
Type
Ground Kit
GK-S200TT
Part
Number
GK-S200TT
Hardware Accessories
Stock
Code Description
GK-S200TT Standard Ground Kit (each)
Type
Crimp Tool
Cutting Tool
Deburr Tool
Replacement Blade
CT-240/200/195/100 DBT-U
Part
Number
CT-240/200/195/100
CCT-01
DBT-U
RB-01
Install Tools
Stock
Code Description
3190-667
3190-1544
3192-001
3190-1609
CCT-01
Crimp tool for LMR-100, 195, 200 and 240 connectors
Cable end flush cut tool
Removes center conductor rough edges
Replacement blade for cutting tool
(800) TMS-COAX • www.timesmicrowave.com
15
TIMES
MICROWAVE SYSTEMS
LMR
®
-300
Flexible Low Loss Communications Coax
Ideal for…
• Jumper Assemblies in Wireless Communications Systems
• Short Antenna Feeder runs
• Any application (e.g. WLL, GPS, LMR, WLAN, WISP, WiMax,
SCADA, Mobile Antennas) requiring an easily routed, low loss RF cable
• LMR
® standard is a UV Resistant Polyethylene jacketed cable designed for 20-year service outdoor use. The bending and handling characteristics are significantly better than air-dielectric and corrugated hard-line cables.
• LMR
®
- DB
is identical to standard LMR plus has the advantage of being watertight. The addition of waterproofing compound in and around the foil/braid insures continuous reliable service should the jacket be inadvertently damaged during installation or in the future.
• LMR
®
- FR
is a non-halogen (non-toxic), low smoke, fire retardant cable designed for in-building runs that can be routed anywhere except air handling plenums. LMR-FR has a UL/NEC
& CSA rating of ‘CMR’ and ‘FT4’ respectively.
In addition, the
LMR-FR series is MSHA-P rated for mining operations.
• LMR
®
- FR-PVC
is a general-purpose indoor cable and has a UL/NEC & CSA rating of ‘CMR’ and ‘FT4’ respectively. It is less expensive than LMR-FR, however it emits toxic fumes
(HCL) and greater smoke density when burned.
• LMR
®
- PVC
is designed for low loss general-purpose indoor/ outdoor applications and is somewhat more flexible than the standard polyethylene jacketed LMR.
• LMR
®
- PVC-W
is a white-jacketed version of LMR-PVC for marine and other indoor/outdoor applications where color compatibility is desired.
• Flexibility
and bendability are hallmarks of the LMR-300 cable design. The flexible outer conductor enables the tightest bend radius available for any cable of similar size and performance.
• Low Loss is another hallmark feature of LMR-300. Size for size LMR has the lowest loss of any flexible cable and comparable loss to semirigid hard-line cables.
• RF Shielding
is 50 dB greater than typical single shielded coax (40 dB). The multi-ply bonded foil outer
conductor is rated conservatively at > 90 dB (i.e. >180 dB between two adjacent cables).
• Weatherability: LMR-300 cables designed for outdoor exposure incorporate the best materials for UV resistance and have life expectancy in excess of 20 years.
• Connectors: A wide variety of connectors are available for
LMR-300 cable, including all common interface types, reverse polarity, and a choice of solder or non-solder center pins.
Most LMR connectors employ crimp outer attachment using standard hex crimp sizes.
• Cable Assemblies: All LMR-300 cable types are available as pre-terminated cable assemblies. Refer to the section on FlexTech for further details.
Part Number
Part Description
Application
Stock
Jacket Color Code
LMR-300
LMR-300-DB
Outdoor
Outdoor/Watertight
PE Black 54086
PE Black 54114
LMR-300-FR Indoor -Riser CMR FRPE Black 54087
LMR-300-FR-PVC Indoor -Riser CMR FRPVC Black 54108
LMR-300-PVC Indoor/Outdoor
LMR-300-PVC-W Indoor/Outdoor
PVC Black 54217
PVC White 54203
Construction Specifications
Description Material In. (mm)
Inner Conductor
Dielectric
Outer Conductor
Overall Braid
Jacket
Solid BC
Foam PE
Aluminum Tape
Tinned Copper
(see table above)
0.070 (1.78)
0.190 (4.83)
0.196 (4.98)
0.225 (5.72)
0.300 (7.62)
Environmental Specifications
Performance Property
Installation Temperature Range
Storage Temperature Range
Operating Temperature Range
0
F o
C
-40/+185 -40/+85
-94/+185 -70/+85
-40/+185 -40/+85
Electrical Specifications
Performance Property Units US
Cutoff Frequency
Velocity of Propagation
Dielectric Constant
Time Delay
Impedance
Capacitance
Inductance
Shielding Effectiveness
DC Resistance
Inner Conductor
Outer Conductor
Voltage Withstand
Jacket Spark
Peak Power
(metric)
GHz
%
NA nS/ft (nS/m) ohms pF/ft (pF/m) uH/ft (uH/m) dB
24.5
85
1.38
1.20 (3.92)
50
23.9 (78.4)
0.060 (0.20)
>90 ohms/1000ft (/km) 2.12 (7.0) ohms/1000ft (/km) 2.21 (7.3)
Volts DC 2000
Volts RMS kW
5000
10
20
(800) TMS-COAX • www.timesmicrowave.com
Mechanical Specifications
Performance Property Units US (metric)
Bend Radius: installation
Bend Radius: repeated
Bending Moment
Weight
Tensile Strength
Flat Plate Crush in. (mm) in. (mm) ft-lb (N-m) lb/ft (kg/m) lb (kg) lb/in. (kg/mm)
0.88
3.0
(22.2)
(76.2)
0.38 (0.52)
0.055 (0.08)
120
30
(54.5)
(0.54)
Attenuation vs. Frequency (typical)
TIMES
MICROWAVE SYSTEMS
100
10
1
10
Frequency (MHz) 30
Attenuaton dB/100 ft 1.1
Attenuaton dB/100 m 3.5
Avg. Power kW 2.09
50
1.4
4.5
1.62
100
Frequency (MHz)
150 220
2.4
7.9
0.92
2.9
9.6
0.76
450
4.2
13.8
0.52
900
1,000 10,000
1500 1800 2000 2500 5800
6.1 7.9 8.7 9.2 10.4 16.5
19.9 26.0 28.7 30.3 34.2 54.2
0.36 0.28 0.25 0.24 0.21 0.13
Calculate Attenuation = (0.191930) • FMHz + (0.000330) • FMHz (interactive calculator available at http://www.timesmicrowave.com/cable_calculators)
Attenuation: VSWR=1.0 ; Ambient = +25°C (77°F) Power: VSWR=1.0; Ambient = +40°C; Inner Conductor = 100°C (212°F);
Sea Level; dry air; atmospheric pressure; no solar loading
TC-300-NM
Interface
N Male
N Male
TNC Male
SMA Male
SMA Female
Description
Part
Number
TC-300-NM-RA
TC-300-TM
TC-300-SM
TC-300-SF-BH
Connectors
Stock
Code Freq. (GHz) Nut
Inner Outer Finish*
VSWR** Coupling Contact Contact Body Length Width Weight
Attach Attach /Pin in (mm) in (mm) lb (g)
Straight Plug
Right Angle
Straight Plug
Straight Plug
TC-300-NM
TC-300-NM-RA
TC-300-TM
TC-300-SM
Bulkhead Jack TC-300-SF-BH
3190-498 <1.25:1 (6) Hex/Knurl
3190-499 <1.35:1 (2.5) Hex/Knurl
3190-500 <1.25:1 (2.5)
3190-501 <1.25:1 (2.5)
3190-590 <1.25:1 (2.5)
Knurl
Hex
NA
Solder Crimp
Solder Crimp
Solder Crimp
Solder Crimp
Solder Crimp
N/S
N/S
N/G
SS/G
SS/G
1.6 (41) 0.85 (21.6) 0.074 (33.8)
1.5 (38) 0.85 (21.6) 0.101 (45.8)
1.7 (43) 0.59 (15.0) 0.050 (22.7)
1.0 (25) 0.35 (8.9) 0.018 (8.2)
1.1 (28) 0.31 (7.9) 0.022 (10.0)
* Finish metals: N=Nickel, S=Silver, G=Gold, SS=Stainless Steel, A=Alballoy **VSWR spec based on 3 foot cable with a connector pair
Hardware Accessories
Type Part Number Stock Code Description
Ground Kit GK-S300TT GK-S300TT Standard Ground Kit
(each)
DBT-U
GK-S300TT
Install Tools
Part Number Stock Code Description Type
Crimp Tool
Deburr Tool
Cutting Tool
CT-300/400
DBT-U
CCT-01
3190-666
3192-001
3190-1544
CT-300/400
Crimp tool for LMR-300 connectors
Removes center conductor rough edges
Cable end flush cut tool
Replacement Blade RB-01 3190-1609 Replacement blade for cutting tool
(800) TMS-COAX • www.timesmicrowave.com
CCT-01
21
TIMES
MICROWAVE SYSTEMS
LMR
®
-400
Flexible Low Loss Communications Coax
Ideal for…
• Drop-in replacement for RG-8/9913 Air-Dielectric type Cable
• Jumper Assemblies in Wireless Communications Systems
• Short Antenna Feeder runs
• Any application (e.g. WLL, GPS, LMR, WLAN, WISP, WiMax,
SCADA, Mobile Antennas) requiring an easily routed,
low loss RF cable
• LMR
® standard is a UV Resistant Polyethylene jacketed cable designed for 20-year service outdoor use. The bending and handling characteristics are significantly better than air-dielectric and corrugated hard-line cables.
• LMR
®
- DB
is identical to standard LMR plus has the advantage of being watertight. The addition of waterproofing compound in and around the foil/braid insures continuous reliable service should the jacket be inadvertently damaged during installation or in the future.
• LMR
®
- FR
is a non-halogen (non-toxic), low smoke, fire retardant cable designed for in-building runs that can be routed anywhere except air handling plenums. LMR-
FR has a UL/NEC & CSA rating of ‘CMR’ and ‘FT4’ respectively. In addition, the LMR-FR series is MSHA-P rated for mining operations.
• LMR
®
- FR-PVC
is a general-purpose indoor cable and has a UL/NEC & CSA rating of ‘CMR’ and ‘FT4’ respectively. It is less expensive than LMR-FR, however it emits toxic fumes (HCL) and greater smoke density when burned.
• LMR
®
- PVC
is designed for low loss general-purpose indoor/outdoor applications and is somewhat more flexible than the standard polyethylene jacketed LMR.
• LMR
®
- PVC-W
is a white-jacketed version of LMR-
PVC for marine and other indoor/outdoor applications where color compatibility is desired.
• Flexibility and bendability are hallmarks of the LMR-
400 cable design. The flexible outer conductor enables the tightest bend radius available for any cable of similar size and performance.
• Low Loss is another hallmark feature of LMR-400.
Size for size LMR has the lowest loss of any flexible cable and comparable loss to semirigid hard-line cables.
• RF Shielding
is 50 dB greater than typical single shielded coax (40 dB). The multi-ply bonded foil outer conductor is rated conservatively at > 90 dB (i.e. >180 dB between two adjacent cables).
• Weatherability: LMR-400 cables designed for outdoor exposure incorporate the best materials for UV resistance and have life expectancy in excess of 20 years.
• Connectors: A wide variety of connectors are available for LMR-400 cable, including all common interface types, reverse polarity, and a choice of solder or nonsolder center pins. Most LMR connectors employ crimp outer attachment using standard hex crimp sizes.
• Cable Assemblies: All LMR-400 cable types are available as pre-terminated cable assemblies. Refer to the section on FlexTech for further details.
Part Number
Part Description
Application
Stock
Jacket Color Code
LMR-400
LMR-400-DB
Outdoor
Outdoor/Watertight
PE Black 54001
PE Black 54091
LMR-400-FR Indoor -Riser CMR FRPE Black 54030
LMR-400-FR-PVC Indoor -Riser CMR FRPVC Black 54073
LMR-400-PVC Indoor/Outdoor
LMR-400-PVC-W Indoor/Outdoor
PVC Black 54218
PVC White 54204
Construction Specifications
Description Material In. (mm)
Inner Conductor
Dielectric
Outer Conductor
Overall Braid
Jacket
Solid BCCAI
Foam PE
Aluminum Tape
Tinned Copper
(see table above)
0.108 (2.74)
0.285 (7.24)
0.291 (7.39)
0.320 (8.13)
0.405 (10.29)
22
(800) TMS-COAX • www.timesmicrowave.com
Mechanical Specifications
Performance Property Units US (metric)
Bend Radius: installation
Bend Radius: repeated
Bending Moment
Weight
Tensile Strength
Flat Plate Crush in. (mm) in. (mm) ft-lb (N-m) lb/ft (kg/m) lb (kg) lb/in. (kg/mm)
1.00 (25.4)
4.0 (101.6)
0.5 (0.68)
0.068 (0.10)
160
40
(72.6)
(0.71)
Environmental Specifications
Performance Property
Installation Temperature Range
Storage Temperature Range
Operating Temperature Range
0
F o
C
-40/+185 -40/+85
-94/+185 -70/+85
-40/+185 -40/+85
TIMES
MICROWAVE SYSTEMS
Electrical Specifications
Performance Property Units US (metric)
Cutoff Frequency
Velocity of Propagation
Dielectric Constant
Time Delay
Impedance
Capacitance
Inductance
Shielding Effectiveness
DC Resistance
Inner Conductor
Outer Conductor
Voltage Withstand
Jacket Spark
Peak Power
GHz
%
NA nS/ft (nS/m) ohms pF/ft (pF/m) uH/ft (uH/m) dB
16.2
85
1.38
1.20 (3.92)
50
23.9 (78.4)
0.060 (0.20)
>90 ohms/1000ft (/km) 1.39 (4.6) ohms/1000ft (/km) 1.65 (5.4)
Volts DC 2500
Volts RMS kW
8000
16
Attenuation vs. Frequency (typical)
10.0
1.0
0.1
10 100
Frequency (MHz)
1,000 10,000
Frequency (MHz) 30 50 150 220 450 900 1500 1800 2000 2500 5800
Attenuation dB/100 ft
0.7 0.9 1.5 1.9 2.7 3.9 5.1 5.7 6.0 6.8 10.8
Attenuation dB/100 m 2.2
2.9 5.0 6.1 8.9 12.8 16.8 18.6 19.6 22.2 35.5
Avg. Power kW
3.33 2.57 1.47 1.20 0.83 0.58 0.44 0.40 0.37 0.33 0.21
Calculate Attenuation =
(0.122290) • FMHz + (0.000260) • FMHz (interactive calculator available at http://www.timesmicrowave.com/cable_calculators)
Attenuation:
VSWR=1.0 ; Ambient = +25°C (77°F)
Power:
VSWR=1.0; Ambient = +40°C; Inner Conductor = 100°C (212°F); Sea Level; dry air; atmospheric pressure; no solar loading
(800) TMS-COAX • www.timesmicrowave.com
23
TIMES
MICROWAVE SYSTEMS
LMR
®
-400
Flexible Low Loss Communications Coax
SC-400-NM
TC-400-NM TC-400-NMC
TC-400-NMH-RA-D
EZ-400-NMH-D
TC-400-NMC-RA (A)
TC-400-NMH-D
EZ-400-NMH-RA
EZ-400-NMK
TC-400-NM-RP
EZ-400-NMC-2
TC-400-NFC
Interface Description
Part
Number
-
Connectors
Stock
Inner Outer Finish*
VSWR ** Coupling Contact Contact Body Length Width
Code Freq. (GHz) Nut Attach Attach /Pin in (mm) in (mm)
Weight lb (g)
SMA Male
TNC Female
TNC Male
UHF Male
7-16 DIN Female Straight Jack TC-400-716-FC
7-16 DIN Male Straight Plug TC-400-716-MC
3190-376 <1.25:1 (2.5)
3190-279 <1.25:1 (2.5)
7-16 DIN Male Right Angle TC-400-716MC-RA 3190-1671 <1.25:1 (<3)
BNC Male Straight Plug TC-400-BM 3190-318 <1.25:1 (2.5)
HN Male
QDS Male
Mini-UHF
N Female
Straight Plug
Straight Plug
Straight Plug
Straight Jack
TC-400-HNM
TC-400-QDSM
TC-400-MUHF
TC-400-NFC
3190-923
3190-620
<1.25: (<1)
<1.25: (<3)
NA
Hex
Hex
Knurl
Knurl
Knurl
3190-520 <1.25:1(2.5) Knurl
3190-299 <1.25:1 (2.5) NA
N Male
Straight Plug
Straight Jack
Straight Plug
Straight Plug
Straight Plug
Straight Plug
EZ-400-NFC-2
EZ-400-NF
SC-400-NM
TC-400-NM
TC-400-NMC
EZ-400-NMC-2
3190-1907 <1.25:1 (2.5)
3190-956 <1.25:1 (2.5)
Bulkhead Jack EZ-400-NF-BH 3190-518
#
<1.25:1 (2.5)
Bulkhead Jack TC-400-NFC-BH (A) 3190-872 <1.25:1 (2.5)
3190-1454 <1.25:1 (2.5)
3190-188 <1.25:1 (2.5)
NA
NA
NA
NA
Knurl
Knurl
Solder
Solder
Solder
Solder
Solder
Clamp
Clamp
Clamp
Crimp
Spring Finger Clamp
Spring Finger Crimp
Spring Finger Crimp
Clamp
S/S
S/S
A/S
N/S
N/G
N/G
N/G
A/G
1.6 (41)
1.4 (36)
2.4 (61.5) 1.88 (47.8)
1.7 (43)
1.5 (38)
1.8 (45)
1.8 (46)
1.8 (46)
1.13 (28.7)
1.40 (35.6)
0.56 (14.2)
0.89 (22.6)
0.66 (16.8)
0.88 (22.4)
0.88 (22.4)
Solder Crimp N/G 1.5 (38) 0.75 (19.1)
Solder Crimp N/G 1.5 (38) 0.75 (19.1)
3190-277 <1.25:1 (2.5) Knurl Solder Clamp N/G 1.5 (38) 0.70 (17.8)
3190-1906 <1.25:1 (2.5) Hex/Knurl Spring Finger Clamp N/G 1.5 (38) 0.75 (19.1)
0.281 (127.5)
0.268 (121.6)
0.35 (159)
0.063 (28.6)
Solder Clamp S/G 2.3 (59.2) 0.88 (22.4)
Solder Clamp A/G 1.8 (46.6) 1.00 (25.4)
0.25 (113.4)
0.25 (113.4)
Solder Crimp N/G 1.1 (28) 0.50 (12.7) 0.020 (9.1)
Solder Clamp N/S 1.6 (41) 0.75 (19.1) 0.119 (54.0)
0.121 (54.9)
0.105 (47.6)
0.102 (46.3)
0.145 (65.8)
0.090 (40.8)
0.090 (40.8)
0.121 (54.9)
0.121 (54.9)
Straight Plug
Straight Plug
Straight Plug
Right Angle
EZ-400-NMH-D
TC-400-NMH-D
3190-400
#
<1.25:1 (10)
3190-552 <1.25:1 (10)
Hex/Knurl Spring Finger Crimp
Hex/Knurl Solder Crimp
A/G
A/G
1.5 (38)
1.5 (38)
0.89 (22.6)
0.89 (22.6)
EZ-400-NMK 3190-661 <1.25:1 (10) Knurl Spring Finger Crimp S/G 1.5 (38) 0.75 (22.6)
TC-400-NMH-RA-D 3190-2293
#
<1.35:1 (6) Hex/Knurl Solder Crimp A/G 1.8 (46) 1.25 (31.8)
Right Angle TC-400-NMC-RA (A) 3190-870 <1.35:1 (2.5)
Right Angle EZ-400-NMH-RA 3190-761 <1.35:1 (2.5)
Reverse Polarity TC-400-NM-RP
Straight Plug TC-400-SM
3190-960
3190-439
<1.25:1 (2.5)
<1.25:1 (8)
Reverse Polarity TC-400-TF-RP
Reverse Polarity EZ-400-TF-RP
Straight Plug
Straight Plug
TC-400-TM
EZ-400-TM
3190-1063 <1.25:1 (2.5)
3190-795 <1.25:1 (2.5)
3190-260 <1.25:1 (2.5)
3190-650 <1.25:1 (2.5)
Right Angle TC-400-TM-RA 3190-442
#
<1.35:1 (2.5)
Reverse Polarity TC-400-TM-RP 3190-1062 <1.25:1 (2.5)
Reverse Polarity EZ-400-TM-RP
Straight Plug EZ-400-UM
3190-794 <1.25:1 (2.5)
3190-997 <1.25:1 (2.5)
Hex
Hex Spring Finger Crimp S/G 1.8 (46) 1.25 (31.8)
Knurl
Hex
NA
-NA
Knurl
Knurl
Knurl
Solder Clamp A/G 1.8 ( 46) 1.25 (31.8)
Solder
Solder
Solder
Solder
Solder
Solder
Crimp
Crimp
Crimp
Spring Finger Crimp
Crimp
Knurl Spring Finger Crimp
Crimp
Crimp
Knurl Spring Finger Crimp
Knurl Spring Finger Crimp
N/G
N/G
N/G
A/G
N/S
N/S
N/G
N/G
A/G
N/G
1.5 (38)
1.2 (29)
1.8 (46)
1.8 (46)
1.7 (43)
1.7 (43)
1.7 (43)
1.7 (43)
1.7 (43)
1.9 (48)
0.75 (19.1)
0.50 (12.7)
0.55 (14.0)
0.55 (14.0)
0.59 (15.0)
0.59 (15.0)
0.59 (15.0)
0.59 (15.0)
0.59 (15.0)
0.80 (20.3)
0.103 (46.8)
0.113 (51.3)
0.113 (51.3)
0.130 (59.0)
0.150 (68.0)
0.130 (59.0)
0.090 (40.8)
0.032 (14.5)
0.074 (33.6)
0.074 (33.6)
0.074 (33.6)
0.074 (33.6)
0.085 (38.6)
0.074 (33.6)
0.074 (33.6)
0.090 (40.8)
* Finish metals: N=Nickel, S=Silver, G=Gold, SS=Stainless Steel, A=Alballoy **VSWR spec based on 3 foot cable with a connector pair
#
Available in bulk pack
24
(800) TMS-COAX • www.timesmicrowave.com
EZ-400-NF
EZ-400-NF-BH
TC-400-TM-RA
TC-400-NFC-BH (A)
TC-400-TM
EZ-400-TM
TC-400-TM-RP
EZ-400-TM-RP
TC-400-TF-RP
EZ-400-TF-RP
TC-400-SM
TC-400-BM
TC-400-MUHF
EZ-400-UM
TC-400-716MC
TC-400-716FC
GK-S400TT
HX-4
CT-400/300
HG-400T
Type
Ground Kit
Hoisting Grip
TC-400-HNM TC-400-QDSM
Hardware Accessories
Part
Number
GK-S400TT
HG-400T
Stock
Code
GK-S400TT
HG-400T
Description
Standard Grounding Kit (each)
Laced Type (each)
RB-456
ST-400C-2
GST-400
CCT-01
CR-400
DBT-U
Type
Crimp Tool
Crimp Dies
Crimp Tool
Crimp Rings
Strip Tool
Strip Tool
Mid-Span Strip Tool
Replacement Blades
Deburr Tool
Cutting Tool
Replacement Blade
Tool Kit
Part
Number
HX-4
Y1719
CT-400/300
CR-400
ST-400C-2
CST-400
GST-400
RB-456
DBT-U
CCT-01
RB-01
TK-400EZ
CST-400
Y1719
Stock
Code
3190-200
3190-202
3190-666
3190-830
3190-1972
3192-004
3190-2174
3190-421
3192-001
3190-1544
3190-1609
3190-1601
Install Tools
TK-400EZ
Description
Crimp Handle
.429" Hex Dies
Crimp tool for LMR 400 connectors
Crimp rings for TC/EZ-400 connectors (package of 10)
Prep tool for EZ-400-NMC-2 two piece clamp style connector
Combination prep tool for LMR-400 crimp and clamp style connectors
For ground strap attachment
Replacement blades for Strip Tool
Removes center conductor rough edges
Cable end flush cut tool
Replacement blade for cutting tool
Tool kit for LMR-400 Crimp Connectors (includes CCT-01, CST-400,
CT-400/300, DBT-U, Tool Pouch)
LMR
®
-400
Flexible Low Loss Communications Coax
SC-400-NM
TC-400-NM TC-400-NMC
TC-400-NMH-RA-D
EZ-400-NMH-D
TC-400-NMC-RA (A)
TC-400-NMH-D
EZ-400-NMH-RA
EZ-400-NMK
TC-400-NM-RP
EZ-400-NMC-2
TC-400-NFC
Interface Description
Part
Number
-
Connectors
Stock
Inner Outer Finish*
VSWR ** Coupling Contact Contact Body Length Width
Code Freq. (GHz) Nut Attach Attach /Pin in (mm) in (mm)
Weight lb (g)
SMA Male
TNC Female
TNC Male
UHF Male
7-16 DIN Female Straight Jack TC-400-716-FC
7-16 DIN Male Straight Plug TC-400-716-MC
3190-376 <1.25:1 (2.5)
3190-279 <1.25:1 (2.5)
7-16 DIN Male Right Angle TC-400-716MC-RA 3190-1671 <1.25:1 (<3)
BNC Male Straight Plug TC-400-BM 3190-318 <1.25:1 (2.5)
HN Male
QDS Male
Mini-UHF
N Female
Straight Plug
Straight Plug
Straight Plug
Straight Jack
TC-400-HNM
TC-400-QDSM
TC-400-MUHF
TC-400-NFC
3190-923
3190-620
<1.25: (<1)
<1.25: (<3)
NA
Hex
Hex
Knurl
Knurl
Knurl
3190-520 <1.25:1(2.5) Knurl
3190-299 <1.25:1 (2.5) NA
N Male
Straight Plug
Straight Jack
Straight Plug
Straight Plug
Straight Plug
Straight Plug
EZ-400-NFC-2
EZ-400-NF
SC-400-NM
TC-400-NM
TC-400-NMC
EZ-400-NMC-2
3190-1907 <1.25:1 (2.5)
3190-956 <1.25:1 (2.5)
Bulkhead Jack EZ-400-NF-BH 3190-518
#
<1.25:1 (2.5)
Bulkhead Jack TC-400-NFC-BH (A) 3190-872 <1.25:1 (2.5)
3190-1454 <1.25:1 (2.5)
3190-188 <1.25:1 (2.5)
NA
NA
NA
NA
Knurl
Knurl
Solder
Solder
Solder
Solder
Solder
Clamp
Clamp
Clamp
Crimp
Spring Finger Clamp
Spring Finger Crimp
Spring Finger Crimp
Clamp
S/S
S/S
A/S
N/S
N/G
N/G
N/G
A/G
1.6 (41)
1.4 (36)
2.4 (61.5) 1.88 (47.8)
1.7 (43)
1.5 (38)
1.8 (45)
1.8 (46)
1.8 (46)
1.13 (28.7)
1.40 (35.6)
0.56 (14.2)
0.89 (22.6)
0.66 (16.8)
0.88 (22.4)
0.88 (22.4)
Solder Crimp N/G 1.5 (38) 0.75 (19.1)
Solder Crimp N/G 1.5 (38) 0.75 (19.1)
3190-277 <1.25:1 (2.5) Knurl Solder Clamp N/G 1.5 (38) 0.70 (17.8)
3190-1906 <1.25:1 (2.5) Hex/Knurl Spring Finger Clamp N/G 1.5 (38) 0.75 (19.1)
0.281 (127.5)
0.268 (121.6)
0.35 (159)
0.063 (28.6)
Solder Clamp S/G 2.3 (59.2) 0.88 (22.4)
Solder Clamp A/G 1.8 (46.6) 1.00 (25.4)
0.25 (113.4)
0.25 (113.4)
Solder Crimp N/G 1.1 (28) 0.50 (12.7) 0.020 (9.1)
Solder Clamp N/S 1.6 (41) 0.75 (19.1) 0.119 (54.0)
0.121 (54.9)
0.105 (47.6)
0.102 (46.3)
0.145 (65.8)
0.090 (40.8)
0.090 (40.8)
0.121 (54.9)
0.121 (54.9)
Straight Plug
Straight Plug
Straight Plug
Right Angle
EZ-400-NMH-D
TC-400-NMH-D
3190-400
#
<1.25:1 (10)
3190-552 <1.25:1 (10)
Hex/Knurl Spring Finger Crimp
Hex/Knurl Solder Crimp
A/G
A/G
1.5 (38)
1.5 (38)
0.89 (22.6)
0.89 (22.6)
EZ-400-NMK 3190-661 <1.25:1 (10) Knurl Spring Finger Crimp S/G 1.5 (38) 0.75 (22.6)
TC-400-NMH-RA-D 3190-2293
#
<1.35:1 (6) Hex/Knurl Solder Crimp A/G 1.8 (46) 1.25 (31.8)
Right Angle TC-400-NMC-RA (A) 3190-870 <1.35:1 (2.5)
Right Angle EZ-400-NMH-RA 3190-761 <1.35:1 (2.5)
Reverse Polarity TC-400-NM-RP
Straight Plug TC-400-SM
3190-960
3190-439
<1.25:1 (2.5)
<1.25:1 (8)
Reverse Polarity TC-400-TF-RP
Reverse Polarity EZ-400-TF-RP
Straight Plug
Straight Plug
TC-400-TM
EZ-400-TM
3190-1063 <1.25:1 (2.5)
3190-795 <1.25:1 (2.5)
3190-260 <1.25:1 (2.5)
3190-650 <1.25:1 (2.5)
Right Angle TC-400-TM-RA 3190-442
#
<1.35:1 (2.5)
Reverse Polarity TC-400-TM-RP 3190-1062 <1.25:1 (2.5)
Reverse Polarity EZ-400-TM-RP
Straight Plug EZ-400-UM
3190-794 <1.25:1 (2.5)
3190-997 <1.25:1 (2.5)
Hex
Hex Spring Finger Crimp S/G 1.8 (46) 1.25 (31.8)
Knurl
Hex
NA
-NA
Knurl
Knurl
Knurl
Solder Clamp A/G 1.8 ( 46) 1.25 (31.8)
Solder
Solder
Solder
Solder
Solder
Solder
Crimp
Crimp
Crimp
Spring Finger Crimp
Crimp
Knurl Spring Finger Crimp
Crimp
Crimp
Knurl Spring Finger Crimp
Knurl Spring Finger Crimp
N/G
N/G
N/G
A/G
N/S
N/S
N/G
N/G
A/G
N/G
1.5 (38)
1.2 (29)
1.8 (46)
1.8 (46)
1.7 (43)
1.7 (43)
1.7 (43)
1.7 (43)
1.7 (43)
1.9 (48)
0.75 (19.1)
0.50 (12.7)
0.55 (14.0)
0.55 (14.0)
0.59 (15.0)
0.59 (15.0)
0.59 (15.0)
0.59 (15.0)
0.59 (15.0)
0.80 (20.3)
0.103 (46.8)
0.113 (51.3)
0.113 (51.3)
0.130 (59.0)
0.150 (68.0)
0.130 (59.0)
0.090 (40.8)
0.032 (14.5)
0.074 (33.6)
0.074 (33.6)
0.074 (33.6)
0.074 (33.6)
0.085 (38.6)
0.074 (33.6)
0.074 (33.6)
0.090 (40.8)
* Finish metals: N=Nickel, S=Silver, G=Gold, SS=Stainless Steel, A=Alballoy **VSWR spec based on 3 foot cable with a connector pair
#
Available in bulk pack
TIMES
MICROWAVE SYSTEMS
EZ-400-NF
EZ-400-NF-BH
TC-400-TM-RA
TC-400-NFC-BH (A)
TC-400-TM
EZ-400-TM
TC-400-TM-RP
EZ-400-TM-RP
TC-400-TF-RP
EZ-400-TF-RP
TC-400-SM
TC-400-BM
TC-400-MUHF
EZ-400-UM
TC-400-716MC
TC-400-716FC
GK-S400TT
HX-4
CT-400/300
HG-400T
Type
Ground Kit
Hoisting Grip
TC-400-HNM TC-400-QDSM
Hardware Accessories
Part
Number
GK-S400TT
HG-400T
Stock
Code
GK-S400TT
HG-400T
Description
Standard Grounding Kit (each)
Laced Type (each)
RB-456
ST-400C-2
GST-400
CCT-01
CR-400
DBT-U
Type
Crimp Tool
Crimp Dies
Crimp Tool
Crimp Rings
Strip Tool
Strip Tool
Mid-Span Strip Tool
Replacement Blades
Deburr Tool
Cutting Tool
Replacement Blade
Tool Kit
Part
Number
HX-4
Y1719
CT-400/300
CR-400
ST-400C-2
CST-400
GST-400
RB-456
DBT-U
CCT-01
RB-01
TK-400EZ
CST-400
Y1719
Stock
Code
3190-200
3190-202
3190-666
3190-830
3190-1972
3192-004
3190-2174
3190-421
3192-001
3190-1544
3190-1609
3190-1601
Install Tools
TK-400EZ
Description
Crimp Handle
.429" Hex Dies
Crimp tool for LMR 400 connectors
Crimp rings for TC/EZ-400 connectors (package of 10)
Prep tool for EZ-400-NMC-2 two piece clamp style connector
Combination prep tool for LMR-400 crimp and clamp style connectors
For ground strap attachment
Replacement blades for Strip Tool
Removes center conductor rough edges
Cable end flush cut tool
Replacement blade for cutting tool
Tool kit for LMR-400 Crimp Connectors (includes CCT-01, CST-400,
CT-400/300, DBT-U, Tool Pouch)
(800) TMS-COAX • www.timesmicrowave.com
25
TIMES
MICROWAVE SYSTEMS
LMR
®
-500
Flexible Low Loss Communications Coax
Ideal for…
• Jumper Assemblies in Wireless Communications Systems
• Short Antenna Feeder runs
• Any application (e.g. WLL, GPS, LMR, WLAN, WISP, WiMax,
SCADA, Mobile Antennas) requiring an easily routed, low loss RF cable
• LMR
® standard is a UV Resistant Polyethylene jacketed cable designed for 20-year service outdoor use. The bending and handling characteristics are significantly better than air-dielectric and corrugated hard-line cables.
• LMR
®
- DB
is identical to standard LMR plus has the advantage of being watertight. The addition of waterproofing compound in and around the foil/braid insures continuous reliable service should the jacket be inadvertently damaged during installation or in the future.
• LMR
®
- FR
is a non-halogen (non-toxic), low smoke, fire retardant cable designed for in-building runs that can be routed anywhere except air handling plenums. LMR-
FR has a UL/NEC & CSA rating of ‘CMR’ and ‘FT4’ respectively. In addition, the LMR-FR series is MSHA-P rated for mining applications.
• Flexibility and bendability are hallmarks of the LMR-
500 cable design. The flexible outer conductor enables the tightest bend radius available for any cable of similar size and performance.
• Low Loss is another hallmark feature of LMR-500. Size for size LMR has the lowest loss of any flexible cable and comparable loss to semirigid hard-line cables.
• RF Shielding
is 50 dB greater than typical single shielded coax (40 dB). The multi-ply bonded foil outer conductor is rated conservatively at > 90 dB (i.e. >180 dB between two adjacent cables).
• Weatherability: LMR-500 cables designed for outdoor exposure incorporate the best materials for UV resistance and have life expectancy in excess of 20 years.
• Connectors: A wide variety of connectors are available for LMR-500 cable, including all common interface types, reverse polarity, and a choice of solder or non-solder center pins. Most LMR connectors employ crimp outer attachment using standard hex crimp sizes.
• Cable Assemblies: All LMR-500 cable types are available as pre-terminated cable assemblies. Refer to the section on FlexTech for further details.
Part Number
Part Description
Application
Stock
Jacket Color Code
LMR-500
LMR-500-DB
LMR-500-FR
Outdoor
Outdoor/Watertight
Indoor -Riser CMR
PE Black 54002
PE Black 54092
FRPE Black 54031
Construction Specifications
Description Material In. (mm)
Inner Conductor
Dielectric
Outer Conductor
Overall Braid
Jacket
Solid BCCAl
Foam PE
Aluminum Tape
Tinned Copper
(see table above)
0.142 (3.61)
0.370 (9.40)
0.376 (9.55)
0.405 (10.29)
0.500 (12.70)
Mechanical Specifications
Performance Property Units US (metric)
Bend Radius: installation
Bend Radius: repeated
Bending Moment
Weight
Tensile Strength
Flat Plate Crush in. (mm) in. (mm) ft-lb (N-m) lb/ft (kg/m) lb (kg) lb/in. (kg/mm)
1.25 (31.8)
5.0 (127.0)
1.75 (2.37)
0.097 (0.14)
260 (118.0)
50 (0.89)
Environmental Specifications
Performance Property
Installation Temperature Range
Storage Temperature Range
Operating Temperature Range
0
F o
C
-40/+185 -40/+85
-94/+85 -70/+85
-40/+185 -40/+85
Electrical Specifications
Performance Property Units US (metric)
Cutoff Frequency
Velocity of Propagation
Dielectric Constant
Time Delay
Impedance
Capacitance
Inductance
Shielding Effectiveness
DC Resistance
Inner Conductor
Outer Conductor
Voltage Withstand
Jacket Spark
Peak Power
GHz
%
NA nS/ft (nS/m) ohms pF/ft (pF/m) uH/ft (uH/m) dB
12.6
86
1.35
1.18 (3.88)
50
23.6 (77.5)
0.059 (0.19)
>90 ohms/1000ft (/km) 0.82 (2.7) ohms/1000ft (/km) 1.27 (4.2)
Volts DC 3000
Volts RMS kW
8000
22
26
(800) TMS-COAX • www.timesmicrowave.com
Attenuation vs. Frequency (typical)
TIMES
MICROWAVE SYSTEMS
10.0
1.0
10 100
Frequency (MHz)
1,000 10,000
Frequency (MHz) 30 50 150 220 450 900 1500 1800 2000 2500 5800
Attenuation dB/100 ft 0.5
Attenuation dB/100 m 1.8
Avg. Power kW
0.7
2.3
1.2
4.0
1.5
4.9
2.2
7.1
3.1
10.3
4.1
13.6
4.6
15.0
4.8
15.9
5.5
18.0
8.9
29.1
4.400 3.393 1.931 1.583 1.088 0.752 0.569 0.515 0.485 0.428 0.264
Calculate Attenuation = (0.096590) • FMHz + (0.000260) • FMHz (interactive calculator available at http://www.timesmicrowave.com/cable_calculators)
Attenuation: VSWR=1.0 ; Ambient = +25°C (77°F) Power: VSWR=1.0; Ambient = +40°C; Inner Conductor = 100°C (212°F);
Sea Level; dry air; atmospheric pressure; no solar loading
TC-500-NMC-RA BHA-KIT
TC-500-NMC
TC-500-NFC
Interface
N Female
N Male
TNC Male
UHF Male
TC-500-TM
Description
Part
Number
Connectors
Stock
Code
Inner Outer Finish*
VSWR Coupling Contact Contact Body
Freq. (GHz) Nut Attach Attach /Pin
Straight Jack
Bulkhead Kit
TC-500-NFC
BHA-KIT
3190-215 <1.25:1 (2.5)
3190-223 <1.25:1 (2.5)
Straight Plug TC-500-NMC 3190-377
#
<1.25:1 (2.5)
Right Angle TC-500-NMC-RA 3190-227
#
<1.25:1 (2.5)
NA
NA
Hex
Hex
Solder Clamp
NA NA
Solder Clamp
Solder Clamp
S/G
NA
S/G
S/G
Straight Plug
Straight Plug
TC-500-TM
TC-500-UMC
3190-464 <1.25:1 (2.5)
3190-354 <1.25:1 (2.5)
Hex
Knurl
Solder
Solder
Crimp
Clamp
N/G
S/G
* Finish metals: N=Nickel, S=Silver, G=Gold, SS=Stainless Steel, A=Alballoy
#
Available in bulk pack
TC-500-UMC
Length Width Weight in (mm) in (mm) lb (g)
2.2 (56) 0.94 (23.9) 0.215 (97.5)
NA NA NA NA 0.014 (6.4)
2.1 (53) 0.92 (23.4) 0.228 (103.4)
2.4 (61) 1.5 (38.1) 0.275 (124.7)
1.5 (38) 0.62 (15.7) 0.082 (28.1)
2.1 (53) 0.88 (22.4) 0.215 (97.5)
Y151
CCT-01
HX-4
Type
Crimp Tool
Crimp Dies
Strip Tool
Replacement Blades
Deburr Tool
Cutting Tool
Replacement Blade
Install Tools
Part Number Stock Code Description
HX-4
Y151
ST-500C
RB-456
DBT-U
CCT-01
RB-01
3190-200
3190-465
3190-229
3190-421
3192-001
3190-1544
3190-1609
Crimp Handle
.532" Hex Dies
For Clamp Style Connectors
Replacement Blades for Strip Tools
Removes center conductor rough edges
Cable end flush cut tool
Replacement blade for cutting tool
(800) TMS-COAX • www.timesmicrowave.com
ST-500C
RB-456
DBT-U
27
TIMES
MICROWAVE SYSTEMS
LMR
®
-600
Flexible Low Loss Communications Coax
Ideal for…
• Jumper Assemblies in Wireless Communications Systems
• Short Antenna Feeder runs
• Any application (e.g. WLL, GPS, LMR, WLAN, WISP, WiMax,
SCADA, Mobile Antennas) requiring an easily routed, low loss RF cable
• LMR
® standard is a UV Resistant Polyethylene jacketed cable designed for 20-year service outdoor use. The bending and handling characteristics are significantly better than air-dielectric and corrugated hard-line cables.
• LMR
®
- DB
is identical to standard LMR plus has the advantage of being watertight. The addition of waterproofing compound in and around the foil/braid insures continuous reliable service should the jacket be inadvertently damaged during installation or in the future.
• LMR
®
- FR
is a non-halogen (non-toxic), low smoke, fire retardant cable designed for in-building runs that can be routed anywhere except air handling plenums. LMR-
FR has a UL/NEC & CSA rating of ‘CMR’ and ‘FT4’ respectively. In addition, the LMR-FR series is MSHA-
P rated for mining applications.
• LMR
®
- FR-PVC
is a general-purpose indoor cable and has a UL/NEC & CSA rating of ‘CMR’ and ‘FT4’ respectively. It is less expensive than LMR-FR, however it emits toxic fumes (HCL) and greater smoke density when burned.
• LMR
®
- PVC
is designed for low loss general-purpose indoor/outdoor applications and is somewhat more flexible than the standard polyethylene jacketed LMR.
• LMR
®
- PVC-W
is a white-jacketed version of LMR-
PVC for marine and other indoor/outdoor applications where color compatibility is desired.
Size for size LMR has the lowest loss of any flexible cable and comparable loss to semirigid hard-line cables.
• RF Shielding
• Connectors: is 50 dB greater than typical single shielded coax (40 dB). The multi-ply bonded foil outer conductor is rated conservatively at > 90 dB (i.e. >180 dB between two adjacent cables).
• Weatherability: LMR-600 cables designed for outdoor exposure incorporate the best materials for UV resistance and have life expectancy in excess of 20 years.
A wide variety of connectors are available for LMR-600 cable, including all common interface types, reverse polarity, and a choice of solder or non-solder center pins. Most LMR connectors employ crimp outer attachment using standard hex crimp sizes.
• Cable Assemblies: All LMR-600 cable types are available as pre-terminated cable assemblies. Refer to the section on FlexTech for further details.
Part Number
LMR-600
LMR-600-DB
LMR-600-FR
Part Description
Application
Outdoor
Outdoor/Watertight
Indoor -Riser CMR
Jacket Color
PE
PE
Black
Black
Stock
Code
54003
54093
FRPE Black 54032
LMR-600-FR-PVC Indoor -Riser CMR FRPVC Black 54074
LMR-600-PVC Indoor/Outdoor
LMR-600-PVC-W Indoor/Outdoor
PVC Black 54219
PVC White 54206
• Flexibility and bendability are hallmarks of the LMR-
600 cable design. The flexible outer conductor enables the tightest bend radius available for any cable of similar size and performance.
• Low Loss is another hallmark feature of LMR-600.
28
Construction Specifications
Description Material In.
Inner Conductor
Dielectric
Outer Conductor
Overall Braid
Jacket
(800) TMS-COAX • www.timesmicrowave.com
Solid BCCAl
Foam PE
Aluminum Tape
Tinned Copper
(see table above)
(mm)
0.176
(4.47)
0.455
(11.56)
0.461
(11.71)
0.490
(12.45)
0.590
(14.99)
Mechanical Specifications
Performance Property Units US (metric)
Bend Radius: installation
Bend Radius: repeated
Bending Moment
Weight
Tensile Strength
Flat Plate Crush in. (mm) in. (mm) ft-lb (N-m) lb/ft (kg/m) lb (kg) lb/in. (kg/mm)
1.50
6.0
(38.1)
(152.4)
2.75
(3.73)
0.131
(0.20)
350
60
(158.9)
(1.07)
Environmental Specifications
Performance Property
Installation Temperature Range
Storage Temperature Range
Operating Temperature Range
0
F o
C
-40/+185 -40/+85
-94/+185 -70/+85
-40/+185 -40/+85
TIMES
MICROWAVE SYSTEMS
Electrical Specifications
Performance Property Units US (metric)
Cutoff Frequency
Velocity of Propagation
Dielectric Constant
Time Delay
Impedance
Capacitance
Inductance
Shielding Effectiveness
DC Resistance
Inner Conductor
Outer Conductor
Voltage Withstand
Jacket Spark
Peak Power
GHz
%
NA nS/ft (nS/m) ohms pF/ft (pF/m) uH/ft (uH/m) dB
1.17
23.4
0.058
ohms/1000ft (/km) 0.53
ohms/1000ft (/km) 1.2
Volts DC
Volts RMS kW
10.3
87
1.32
50
>90
4000
8000
40
(3.83)
(76.6)
(0.19)
(1.7)
(3.9)
Attenuation vs. Frequency (typical)
10.0
1.0
0.1
10 100
Frequency (MHz)
1,000 10,000
Frequency (MHz) 30
Attenuation dB/100 ft
0.4
50 150 220 450 900 1500 1800 2000 2500 5800
0.5
1.0
1.2
1.7
2.5
3.3
3.7
3.9
4.4
7.3
Attenuation dB/100 m
1.4
Avg. Power kW
5.51
1.8
4.24
3.2
2.41
3.9
1.97
5.6
1.35
8.2
0.93
10.9
0.70
12.1
0.63
12.8
0.59
14.5
0.52
23.8
0.32
Calculate Attenuation =
(0.075550) • FMHz + (0.000260) • FMHz (interactive calculator available at http://www.timesmicrowave.com/cable_calculators)
Attenuation:
VSWR=1.0; Ambient = +25°C (77°F)
Power:
VSWR=1.0; Ambient = +40°C; Inner Conductor = 100°C (212°F); Sea Level; dry air; atmospheric pressure; no solar loading
(800) TMS-COAX • www.timesmicrowave.com
29
TIMES
MICROWAVE SYSTEMS
LMR
®
-600
Flexible Low Loss Communications Coax
EZ-600-NMH-D
TC-600-NMC-RA
TC-600-NMH-D
EZ-600-NMH-RA
EZ-600-NMC-2
TC-600-NMH-RA
TC-600-NMC
EZ-600-NF
EZ-600-NF-BH
TC-600-NF-BH
TC-600-NFC-BH
EZ-600-TM
EZ-600-TM-RP EZ-600-UM
TC-600-UMC
EZ-600-TF-RP
TC-600-
716MRA
TC-600-
716FC
EZ-600-716MH
TC-600-
716MC
Interface Description
Part
Number
Stock
Code
Connectors
VSWR**
Freq. (GHz)
Coupling
Nut
Inner Outer Finish*
Contact Contact Body Length Width Weight
Attach Attach /Pin in (mm) in (mm) lb (g)
7/8 EIA Flange EZ-600-78EIA
7-16 DIN Female Straight Jack TC-600-716FC
7-16 DIN Male Straight Plug EZ-600-716MH
Straight Plug TC-600-716MC
HN Male
LC Male
N Female
3190-1373 <1.25:1 (2.5)
3190-375 <1.25:1 (2.5)
3190-503 <1.25:1 (2.5)
3190-502 <1.25:1 (2.5)
Right Angle TC-600-716M-RA 3190-395 <1.35:1 (2.5)
Straight Plug TC-600-HNM 3190-1429 <1.25:1 (<1)
Straight Plug TC-600-LCM
Straight Jack EZ-600-NF
3190-1406 <1.25:1 (<1)
3190-955 <1.25:1 (2.5)
N Male
Bulkhead Jack EZ-600-NF-BH
Bulkhead Jack TC-600-NF-BH
Bulkhead JackTC-600-NFC-BH
Straight Plug EZ-600-NMH-D
Straight Plug EZ-600-NMK
Straight Plug TC-600-NMH-D
Straight Plug EZ-600-NMC-2
Straight Plug TC-600-NMC
3190-616
3190-589 #
<1.25:1 (2.5)
<1.25:1 (2.5)
NA
NA
Hex
Knurl
Hex
NA
NA
NA
Spring FingerClamp
Solder Clamp
Hex Spring Finger Crimp
Hex Solder Clamp
Solder
Solder
Solder
Crimp
Clamp
Clamp
Spring Finger Crimp
Spring Finger Crimp
Solder Crimp
3190-466 <1.25:1 (2.5) NA Solder Clamp
3190-1268 <1.25:1 (8) Hex/Knurl Spring Finger Crimp
3190-669 <1.25:1 (2.5)
3190-208 #
Knurl Spring Finger Crimp
<1.25:1 (2.5) Hex/Knurl Solder Crimp
3190-1387 <1.25:1 (6) Hex/Knurl Spring Finger Clamp
3190-357 # <1.25:1 (2.5) Hex Solder Clamp
QDS Male
TNC Male
TNC Female
UHF Male
Right Angle TC-600-NMC-RA
Right Angle EZ-600-NMH-RA
3190-233 <1.35:1 (2.5)
3190-762 <1.35:1 (2.5)
Right Angle
Straight Plug
TC-600-NMH-RA
TC-600-QDSM
3190-785 # <1.35:1 (6)
3190-846 <1.25:1 (<1)
Right Angle TC-600-QDSM-RA 3190-847 <1.25:1 (<1)
Straight Plug EZ-600-TM 3190-418 # <1.25:1 (2.5)
Reverse Polarity EZ-600-TM-RP 3190-796 <1.25:1 (2.5)
Reverse Polarity EZ-600-TF-RP 3190-797 <1.25:1 (2.5)
Straight Plug EZ-600-UM
Straight Plug TC-600-UMC
3190-615 <1.25:1 (2.5)
3190-213 <1.25:1 (2.5)
Hex Solder Clamp
Hex Spring Finger Crimp
Hex
Knurl
Solder
Solder
Crimp
Clamp
Knurl Solder Clamp
Knurl Spring Finger Crimp
Knurl Spring Finger Crimp
NA Spring Finger Crimp
Knurl Spring Finger Crimp
Knurl Solder Clamp
S/S 2 . 3 (58) 2.60 (66.0) 0.873 (396.0)
S/S 1 . 1 (28) 1.00 (25.4) 0.249 (112.9)
S/S 2 . 0 (51) 1.30 (33.0) 0.254 (115.2)
S/S 2 . 0 (51) 1.30 (33.0) 0.347 (157.4)
S/S 1 . 4 (36) 1.40 (35.6) 0.354 (160.8)
S / g 2 . 3 (59.2) 0.88 (22.4) 0.25 (113)
N/S 3.1 (78.0) 1.62 (41.1) 1.20
(544)
S/G 2 . 3 (59) 0.87 (22.1) 0.150 (68.0)
S/G 2.4
(61)
S/G 2.4
(61)
S/G 2.2
(56)
A/G 2.1
(53)
S/G 2.1
(53)
A/G 2.1
(53)
S/G 2.1
(53)
S/G 2.1
(53)
0.88 (22.4) 0.195 (88.5)
0.88 (22.4) 0.195 (88.5)
0.94 (23.9) 0.214 (97.1)
0.92 (23.4) 0.164 (74.4)
0.92 (23.4) 0.164 (74.4)
0.92 (23.4) 0.166 (75.3)
0.92 (23.4) 0.202 (91.6)
0.92 (23.4) 0.208 (93.4)
S/G 2.1
(53)
S/G 2.1
(53)
0.92 (23.4) 0.280 (117.9)
0.92 (23.4) 0.185 (83.9)
S/G 2.1
(53) 0.92 (23.4) 0.185 (83.9)
A/G 2.2 (55.6) 1.00 (25.4) 0.25
(113)
A/G 2.4 (61.5) 1.88 (47.8) 0.35
(159)
S/G 1.7
(43) 0.59 (15.0) 0.112 (50.8)
A/G 2.2
(56)
A/G 2.3
(58)
0.87 (22.0) 0.112 (50.8)
0.87 (22.0) 0.100 (45.4)
S/G 1.7
(43)
S/G 1.7
(43)
0.88 (22.4) 0.164 (74.4)
0.88 (22.4) 0.198 (89.8)
* Finish metals: N=Nickel, S=Silver, G=Gold, SS=Stainless Steel, A=Alballoy **VSWR spec based on 3 foot cable with a connector pair # Available in bulk pack
30
(800) TMS-COAX • www.timesmicrowave.com
TIMES
MICROWAVE SYSTEMS
EZ-600-
78EIA EZ-600-NMK
TC-600-HNM
TC-600-QDSM
TC-600-LCM
TC-600-QDSM-RA
HX-4
ST-600C ST-600EZ
GST-600A
CR-600
CCT-01 Y1720
RB-456
Type
WR-600
Install Tools
Part
Number
Crimp Tool
Crimp Dies
Crimp Rings
HX-4
Y1720
CR-600
Strip Tool
Strip Tool
ST-600C
ST-600EZ
Replacement Blades RB-456
Deburr Tool DBT-U
Midspan Strip Tool
Wrench
Cutting Tool
Replacement Blade
Tool Kit
GST-600A
WR600
CCT-01
RB-01
TK-600EZ
DBT-U
Stock
Code
3190-200
3190-203
3190-831
3190-230
3190-310
3190-421
3192-001
3190-1051
3190-1435
3190-1544
3190-1609
3190-1602
TK-600EZ
Description
Crimp Handle
.610" Hex Dies
Crimp Rings for TC/EZ-600 connectors (pkg of 10)
For Clamp Style Connectors
For Crimp Style Connectors
Replacement Blades for Strip Tools
Removes center conductor rough edges
For ground strap attachment
15/16" Box Wrench (2 required for EZ-600-NMC-2)
Cable end flush cut tool
Replacement blade for cutting tool
Tool kit for LMR-600 Crimp Connectors (includes CCT-01,
ST-600EZ, HX-4, Y1720, DBT-U, Tool Pouch)
SH-U600T
Hardware
Accessories
Type
Part
Number
Hanger Support Hardware
Ground Kit
Hoisting Grip
Cold Shrink
Cold Shrink
GK-S600TT
HG-600T
CS-A600T
CS-60120T
Cold Shrink
Hanger Blocks
CS-60170T
CB-600T
Standard Entry
Port Cushion SC-600T-3
Snap-In Hangers SH-U600T
Hanger Block Supporting Hardware
Stock
Code
GK-S600TT
HG-600T
CS-A600T
CS-60120T
CS-60170T
CB-600T
SC-600T-3
SH-U600T
HG-600T
CS-A600T,
CS-60120T, CS-60170T
CB-600T
SC-600T
(800) TMS-COAX • www.timesmicrowave.com
GK-S600TT
Description
Standard Grounding Kit (each)
Split/Laced Type (each)
Cable to Antenna Junction (each)
LMR-600 to -1200 Junction (each)
LMR-600 to -1700 Junction (each)
Dual Cable Support Block (kit of 10)
Three cables (each)
Snap-In Hangers (Kit of 10)
Complete Range of Supporting Hardware & Adapters Available
31
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project