null  null
Quick Start Guide
BSH380 Stereo Bluetooth Headset
Introduction
With Bluetooth wireless technology, BSH380 gives you the convenient wireless way to enjoy the
streaming stereo music transmitted from the Bluetooth A2DP*1 device such as mobile phone, mp3
player, PC or PDA in the available range.
Moreover, you can use BSH380 to remote control the music playing functions of your Bluetooth device
that supports Bluetooth AVRCP*2.
Switching between music and phone calls, BSH380 also allows you answer or make calls with the
Bluetooth-enabled mobile phone*3 while you are listening to music. After you ended the call, the music
will follow to be streamed in few seconds*4. Besides the wireless stereo and mobile hands-free
applications, you can apply the BSH380 to the Bluetooth-enabled PC*5 with the Internet messenger
such as Skype, MSN Messenger or Yahoo! Messenger.
Notes:
*1 The playback or its plug-in Bluetooth adapter/transmitter needs to support Bluetooth A2DP (Advanced Audio
Distribution Profile).
*2 The playback or its plug-in Bluetooth adapter/transmitter needs to support Bluetooth AVRCP (Audio Video Remote
Control Profile).
*3 The mobile phone needs to support Bluetooth HSP (Headset Profile) or HFP (Hands-free Profile) and support
Bluetooth A2DP (Advanced Audio Distribution Profile).
*4 Some mobile phones do not release the connection switch function to the headset, which will cause the headset to
fail to switch the Bluetooth connection between music and call.
*5 The computer or its plug-in Bluetooth adapter needs to support Bluetooth HSP (Headset Profile).
Product overview
1. Audio port
2. Volume +
3. Microphone
4. Forward/ Next song
5. MFB button (Multi-function button)/ Play/Pause
6. Volume –
7. Microphone
8. Charging port
9. Backward/ Last song
1
How to Charge this Bluetooth Headset
The Bluetooth headset BSH380 has Built-in rechargeable battery.
Before using for the first time, you have to fully charge the battery for 2-3 hours.
BSH380 can provide 6-9 hours of listening time and over 150 hours of standby time.
Charging Instruction
1) The RED LED will flash continuously when battery power is low.
2) Connect the power charging ports with a power source (USB charger or AC charger). When
charging, the RED LED will be on.
3) When the headset is fully charged, the BLUE LED indicator will be ON. Disconnect the charger from
the power source.
How to use Bluetooth Headset along with your mobile phone
Power on
When the headset is off,long press the MFB button until the blue LED flickers to turn it on.
Enter pairing mode
When the headset is off,long press the MFB button until the blue and red LED flicker alternatively. It
means the Bluetooth Headset is in Pairing Mode.
Pair with the Mobile Phone
Pairing is the process of linking the Bluetooth Headset with your Bluetooth device (for example, a
mobile phone). Before you use Bluetooth Headset with your Bluetooth mobile phone, you must pair the
mobile phone with your headset. After the first time they got paired, next time you just need to turn the
headset on and off when you need it. It will automatically reconnect when you turn the headset on
(make sure your mobile phone Bluetooth function is on).
If you wish to use the headset with another mobile phone, you must repeat the pairing process with the
new mobile phone, in this case, the Bluetooth Headset will no longer work with the former mobile
phone.
Please follow the below steps for pairing:
1) When the headset is off, press and hold the MFB button until the red and blue LED flash
alternatively. Make sure your Bluetooth mobile phone is on, and its Bluetooth function has been
activated.
2) Follow the operating instruction of your Bluetooth mobile phone to start the pairing process.
Typically, this is done by going to a “Connect” or “Setup” menu and then selecting the option to
search the BSH380 that is still in the pairing mode.
3) The mobile will find device name BSH380 and ask whether you are willing to connect your mobile
with the headset. Press “Yes” or “Confirm” to confirm this action. If necessary, input the password
“0000”.
Receive a Call
When there is an incoming call, press the MFB button of the headset to answer it.
2
End a Call
Press the MFB button to end it.
Reject incoming call
When there is an incoming call, press and hold the MFB button and you will hear a prompt tone from
the headset. The call is rejected.
Redial a call
In the standby mode, to redial the last outgoing call number, press the MFB button twice and you hear
1 beep.
Voice Dialing
In the standby mode, press the MFB button for 2 seconds then release. You will hear prompt tone from
the headset, say the voice tag. (Please check whether your mobile phone is equipped with voice
dialling function and support Bluetooth Handsfree Profile. Before using the function, make sure you
have record a voice tag into the mobile phone).
Music Function
z Play/Pause: In the standby mode, press the MFB button shortly to activate music play, again to
pause.
z Previous/Next: Press the Previous/Next key shortly to realize such function.
z Volume +/-: Press the Volume +/- key shortly to realize the volume +/- function.
Power off
Press the MFB button until the red light flickers, the device is powered off.
Trouble-shooting
If you are unable to connect your Bluetooth Headset with your Bluetooth audio device, please try the
following:
z Ensure your headset is turn on and is properly charged.
z Ensure the Bluetooth headset is in pairing mode when you try to pair it with your mobile. If the
headset is left with blue & red LED flashing alternatively but not being paired for over 3 minutes,
the headset will be shut off automatically. You have to turn off the headset then enter the pairing
mode again.
z Ensure the Bluetooth dongle or other device is paired with your stereo Bluetooth headset.
z Ensure your device is Bluetooth activated. Please refer to your device’s user manual for
instruction.
z Ensure the headset is within a maximum 10 meters (about 30 feet.) of your Bluetooth device and
there are no obstructions, such as walls or other electronics devices in between.
If the above suggestions do not solve your problem, please recharge your BSH380 and Bluetooth
audio device for a while, then start pairing again.
3
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation
.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
4
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement