When appearances ha e to count as much as

When appearances ha  e to count as much as


Dovoz, distribuce a prodej v ČR:
AUDIO DIGITAL s.r.o.
www.audiodigital.cz
F
or audio installations where good sound is
required as well as the near invisibility of
speaker units and related hardware, TOA H Series
speakers prove ideal. The H Series have been
designed to offer high-quality audio for
locations that place priority on interior
appearance and feature designs that can
effectively blend into the background. This
can be further enhanced as the grilles may
be painted to blend in more unobtrusively
with the color scheme of the environment.
Performance without aesthetic
compromises present new possibilities
that conventional speakers cannot provide.
The attractively styled H Series enclosures
can be semi-flush mounted to minimize
out-of-phase sound reflections that
often pose problems in similar installations.
The H Series offers several models to suit
desired sound dispersion characteristics or for
use in exterior locations. And to augment the
frequency response of the H-Series for a
fuller-bodied sound that is preferred today,
a dedicated subwoofer can easily be
flush-mounted into ceilings or between standard
wall studs, also blending perfectly into any
interior decoration scheme. The H Series offers
an ideal solution to the problem of providing
high-quality audio in
appearance-critical
environments.
Invisible High Performa nce
The H Series may blend into the environment, but
there's no mistaking their TOA sound pedigree.
Whichever model selected, the two-way H Series
speakers can be relied on to deliver accurate,
uncolored sound reproduction that enhances any
program material.
•Every H Series model utilizes a passive crossover
with optimized filter slopes built-in.
•Natural boost at frequencies bet ween 200Hz to
300Hz due to the reinforcement of those frequencies
with half- and quarter-space loading of enclosures
after installation.
•Enclosures have been designed to minimize
reflections and since brackets are not required for
installation, common problems such as out-of-phase
wall or ceiling reflections can be minimized.
•Easily paintable exterior grille and frame to match
decor.
•For easy use in distributed speaker systems, each
speaker has a built-in 70V/100V matching transformer.
•A removable terminal block accepts up to 14AWG
speaker wire and loop-through terminations are
provided when wiring a distributed speaker system.
Features specific to H-1/H-2/H-2WP models
•Ferrofluid-cooled tweeters and neodymium magnetequipped woofers.
•Flexibility for aiming sound with driver components
that revolve within the enclosure.
•The H-1 allows up to 90° of movement while the
H-2/H- 2WP components can revolve 360°. The
external appearance remains unchanged.
Features specific to
H-3/H-3WP models
H -1
wall
•Dome tweeter
and woofers both
equipped with
neodymium magnets.
• Expanded 140°
horizontal dispersion
characteristics.
Conventiona
wall
H-3/H-3WP
Speak
H Series speakers crea
Vertical Dispersion
HB-1
Horizontal Dispersion
wall
wall
90°
on-
axis
on-axis
Dovoz, distribuce a prodej v ČR:
AUDIO DIGITAL s.r.o.
www.audiodigital.cz
Subw oofers tha t sta y out
of sight
Responding to today's trends for a fuller, betterbalanced bandwidth reproduction, TOA developed
an effective subwoofer to complement H Series
speakers. Amazingly compact yet capable of
producing clean, tight low frequency sounds, the
HB-1 subwoofer can also be fitted into walls and
ceilings to maintain an environment's decor without
calling attention to itself.
H-2/H-2WP
H-1
The HB-1's thin metal
cabinet provides
enough displacement
for satisfactory low
frequency response
and helps dissipate
heat for extended
service life.
Versa tile insta lla tion
options
H Series speakers can easily be semi flush-mounted
in ceilings and walls for minimal visibility. Even the
HB-1 subwoofer can be almost hidden by flushmounting it in the ceiling or between standard 16"on- center wall studs. Conventional electrical gang
boxes simplify installation of H Series speakers for
any desired location. And no matter the location -lobbies, restaurants, places of worship, foyers, and
so on -- in any type of building or even homes, the
H Series offers the significant advantages of
outstanding sound and build quality with virtual
invisibility.
ker sound dispersion characteristics
H -2 / H-2WP
H -1
• High power- handling capacity of 240W.
• 8" high-power woofer featuring a 110mm magnet and
aluminum bobbin.
• Bandpass-filtered acoustic super-woofer enhances
bass output.
• Metal frame acts as a heat sink for speaker durability
and more power.
• Optional matching transformer (MT-S0601).
H- 3 / H- 3WP
ceiling
wall
Up to 90° locking
driver positioning
adjustment.
l speaker dispersion patterns leave dead areas between speakers.
ceiling
wall
H -2
ate optimum dispersion between speakers as well as in front of the speakers.
Vertical Dispersion
ceiling
Horizontal Dispersion
Vertical Dispersion
Horizontal Dispersion
wall
360°
on
-ax
wall
20°
FB-100
on-
axis
Super-Woofer Speaker System
is
on-axis
on-axis
Area covered by speaker.
Up to 360° locking
driver positioning
Dovoz, distribuceadjustment.
a prodej v ČR:
AUDIO DIGITAL s.r.o.
www.audiodigital.cz
Designed for applications where even more high-power low
frequency reproduction than obtainable with the HB-1 is desired.
This subwoofer may be cable-suspended or unobtrusively
placed at floor level.
SPECIFICATIONS
H-1
H -2 / H -2WP
Enclosure
Sealed
Sealed
Sealed
Power Handling
90W (continuous program/4Ω),
30W (continuous pink noise/4Ω, 50 – 20,000Hz)
120 W (continuous program/4Ω),
40 W (continuous pink noise/4Ω, 50 – 20,000Hz)
150W (continuous program/8Ω),
50W (continuous pink noise/8Ω, 50 – 20,000Hz)
Rated Input
12W (16Ω, 70V/100V line)
12 W (16Ω, 70V/100V line)
30W (16Ω, 70V/100V line)
Impedance
Direct; 4Ω.
Transformer; 16Ω
100V line; 830Ω (12W), 1.7kΩ (6W), 3.3kΩ (3W)
70V line; 420Ω(12W), 830Ω(6W), 1.7kΩ(3W),
3.3kΩ(1.5W)
Direct; 4Ω.
Transformer; 16Ω
100V line; 830 Ω(12W), 1.7k Ω (6W), 3.3k Ω (3W)
70V line; 420 Ω(12W), 830 Ω (6W), 1.7kΩ (3W),
3.3kΩ (1.5W)
Direct; 8Ω.
Transformer; 16Ω
100V line; 330 Ω (30W), 670 Ω (15W), 1.3k Ω (7.5W)
70V line; 170 Ω (30W), 330 Ω (15W), 670 Ω (7.5W),
1.3kΩ (3.75W)
Sensitivity
85dB (1W/1m, 1/2 space)
88dB (1W/1m, 1/2 space)
89dB (1W/1m, 1/2 space)
Frequency Response
120 – 20,000Hz (–10dB, 1/2 space)
100 – 20,000Hz (–10dB, 1/2 space)
100 – 20,000Hz (–10dB, 1/2 space)
Crossover Frequency
5,000Hz
LPF; –12dB/octave
HPF; –18dB/octave
5,000Hz
LPF; –18dB/octave
HPF; –18dB/octave
4,000Hz
LPF; –12dB/octave
HPF; –18dB/octave
—
H -3 / H -3WP
IP-X4 (H-2WP)
IP-X4 (H-3WP)
Speaker Components
8 cm × 5 cm cone woofer (neodymium magnet)
2.5cm balanced dome tweeter
10cm cone woofer (neodymium magnet)
2.5cm balanced dome tweeter
10cm cone woofer (neodymium magnet) × 2
2.5cm dome tweeter (neodymium magnet)
Input Connector
Removable terminal block with screw terminals
(AWG #14 – #24), 2 pairs of (+)/(–) for input and
loop-through terminations
Removable terminal block with screw terminals
(AWG #14 – #24), 2 pairs of (+)/(–) for input and
loop-through terminations
Removable terminal block with screw terminals
(AWG #14 – #24), 2 pairs of (+)/(–) for input and
loop-through terminations
Material/Finish
Enclosure; fire-resistant ABS resin
(UL94;V – 0 grade), black
Grille; steel plate, white, paint
Trim piece; fire-resistant ABS resin
(UL94; V – 0 grade), white, paint
Adapter panel; stainless steel
Enclosure; fire-resistant ABS resin
(UL94;V – 0 grade), black
Grille; steel plate, white, paint
Grille frame; fire-resistant ABS resin
(UL94; V – 0 grade), white, paint
Base plate; H-2; steel plate, plating
H-2WP; stainless steel
Enclosure; fire-resistant ABS resin
(UL94;V – 0 grade), black
Grille; steel plate, white, paint
Grille frame; fire-resistant ABS resin
(UL94; V – 0 grade), white, paint
Base plate; H-3; steel plate, plating
H-3WP; stainless steel
Dimensions
312 (W) ×126 (H) × 90 (D) mm
(mounting hole; 268 × 98mm)
ø268 × 111 (D) mm
295 (W) × 318 (H) ×129 (D) mm
Weight
1.5kg (including adapter panel)
2.1kg (including base plate)
3.3kg (including base plate)
Accessories
Trim piece × 1,
Adapter frame (HY-H1) × 1
Front grille × 1,
Base plate × 1
Front grille × 1
Base plate × 1
Water Resistance
HB- 1
FB -100
Enclosure
Acoustic Bandpass
Acoustic Bandpass
Power Handling Capacity
240W (continuous program),
80W (continuous pink noise, 40-200Hz)
450W (Continuous program),
150W (Continuous pink noise, 40-200Hz)
Impedance
8Ω
8Ω
Sensitivity
91dB (1W/1m, 1/2 space)
94dB (1W/1m, 1/2 space)
88dB (1W/1m, free-standing in anechoic chamber)
Frequency Response
45 – 200Hz (–10dB, 1/2 space)
35 –160Hz (–10dB, 1/2 space)
Speaker Component
20cm cone woofer
25cm cone woofer
Input Connector
Removable terminal block with screw terminals
(AWG #14 – #24), 2 pairs of (+)/(–) for input and
loop-through terminations
Removable terminal block with screw terminals
(AWG #14 – #24), 2 pairs of (+)/(–) for input and
loop-through terminations
Material/Finish
Enclosure; steel plate, black, paint
Grille; steel plate, white, paint
Grille frame; fire-resistant ABS resin (UL94; V – 0 grade), white, paint
Mounting bracket; steel plate, black, paint
Medium Density Fiberboard (MDF), black, paint
Dimensions
430 (W) × 544 (H) ×135 (D) mm (mounting hole; 360 × 480mm)
354 (W) × 582 (H) × 340 (D) mm
Weight
11kg (including mounting bracket)
16kg
Option
Matching transformer: MT-S0601 (rated 60W)
Matching transformer; MT-S0601 (rated 60W)
H -3/H -3WP
FB-100
129
295
ø268
126
HB-1
340
H- 2 /H- 2WP
582
440
318
354
44
111
46
312
544
H -1
ø268
430
32 103
Dovoz, distribuce a prodej v ČR:
AUDIO DIGITAL s.r.o.
www.audiodigital.cz
TOA Corporation
www.toa.co.jp
Specifications are subject to change without notice.
Printed in Japan (011) 833-61-641-80 u
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement